All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Philipp Zabel <philipp.zabel@gmail.com>
Subject: [PATCH 03/21] regulator: gpio: Get enable GPIO using GPIO descriptor
Date: Mon, 12 Feb 2018 14:16:59 +0100	[thread overview]
Message-ID: <20180212131717.27193-4-linus.walleij@linaro.org> (raw)
In-Reply-To: <20180212131717.27193-1-linus.walleij@linaro.org>

We augment the GPIO regulator to get the *enable* regulator
GPIO line (not the other lines) using a descriptor rather than
a global number.

We then pass this into the regulator core which has been
prepared to hande enable descriptors in a separate patch.

Switch over the two boardfiles using this facility and clean
up so we only pass descriptors around.

Cc: Philipp Zabel <philipp.zabel@gmail.com> # HX4700/Magician maintainer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-pxa/hx4700.c               | 12 +++++++++++-
 arch/arm/mach-pxa/magician.c             | 11 ++++++++++-
 drivers/regulator/gpio-regulator.c       | 23 +++++++++++------------
 include/linux/regulator/gpio-regulator.h |  3 ---
 4 files changed, 32 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e2e7f247a645..6717a10180eb 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/input/navpoint.h>
@@ -711,7 +712,6 @@ static struct gpio_regulator_state bq24022_states[] = {
 static struct gpio_regulator_config bq24022_info = {
 	.supply_name = "bq24022",
 
-	.enable_gpio = GPIO72_HX4700_BQ24022_nCHARGE_EN,
 	.enable_high = 0,
 	.enabled_at_boot = 0,
 
@@ -733,6 +733,15 @@ static struct platform_device bq24022 = {
 	},
 };
 
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+	.dev_id = "gpio-regulator",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN,
+			    "enable", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*
  * StrataFlash
  */
@@ -875,6 +884,7 @@ static void __init hx4700_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
+	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 14c0f80bc9e7..9a5bda3ea194 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -657,7 +657,6 @@ static struct gpio_regulator_state bq24022_states[] = {
 static struct gpio_regulator_config bq24022_info = {
 	.supply_name		= "bq24022",
 
-	.enable_gpio		= GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
 	.enable_high		= 0,
 	.enabled_at_boot	= 1,
 
@@ -679,6 +678,15 @@ static struct platform_device bq24022 = {
 	},
 };
 
+static struct gpiod_lookup_table bq24022_gpiod_table = {
+	.dev_id = "gpio-regulator",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+			    "enable", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 /*
  * fixed regulator for ads7846
  */
@@ -1007,6 +1015,7 @@ static void __init magician_init(void)
 	regulator_register_always_on(0, "power", pwm_backlight_supply,
 		ARRAY_SIZE(pwm_backlight_supply), 5000000);
 
+	gpiod_add_lookup_table(&bq24022_gpiod_table);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
 
diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 0fce06acfaec..172ca4c578b2 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -31,6 +31,7 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
@@ -161,10 +162,6 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
 
 	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
 
-	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
-	if (config->enable_gpio < 0 && config->enable_gpio != -ENOENT)
-		return ERR_PTR(config->enable_gpio);
-
 	/* Fetch GPIOs. - optional property*/
 	ret = of_gpio_count(np);
 	if ((ret < 0) && (ret != -ENOENT))
@@ -254,6 +251,7 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct gpio_regulator_data *drvdata;
 	struct regulator_config cfg = { };
+	enum gpiod_flags gflags;
 	int ptr, ret, state;
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
@@ -340,21 +338,22 @@ static int gpio_regulator_probe(struct platform_device *pdev)
 	cfg.driver_data = drvdata;
 	cfg.of_node = np;
 
-	if (gpio_is_valid(config->enable_gpio)) {
-		cfg.ena_gpio = config->enable_gpio;
-		cfg.ena_gpio_initialized = true;
-	}
 	cfg.ena_gpio_invert = !config->enable_high;
 	if (config->enabled_at_boot) {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 	} else {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
+	}
+	cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "enable", gflags);
+	if (IS_ERR(cfg.ena_gpiod)) {
+		ret = PTR_ERR(cfg.ena_gpiod);
+		goto err_stategpio;
 	}
 
 	drvdata->dev = regulator_register(&drvdata->desc, &cfg);
diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h
index 19fbd267406d..536cab86f2d5 100644
--- a/include/linux/regulator/gpio-regulator.h
+++ b/include/linux/regulator/gpio-regulator.h
@@ -44,8 +44,6 @@ struct gpio_regulator_state {
 /**
  * struct gpio_regulator_config - config structure
  * @supply_name:	Name of the regulator supply
- * @enable_gpio:	GPIO to use for enable control
- *			set to -EINVAL if not used
  * @enable_high:	Polarity of enable GPIO
  *			1 = Active high, 0 = Active low
  * @enabled_at_boot:	Whether regulator has been enabled at
@@ -69,7 +67,6 @@ struct gpio_regulator_state {
 struct gpio_regulator_config {
 	const char *supply_name;
 
-	int enable_gpio;
 	unsigned enable_high:1;
 	unsigned enabled_at_boot:1;
 	unsigned startup_delay;
-- 
2.14.3

  parent reply	other threads:[~2018-02-12 13:16 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-12 13:16 [PATCH 00/21] regulator: switch core to GPIO descriptors Linus Walleij
2018-02-12 13:16 ` [PATCH 01/21] regulator: core: Support passing an initialized GPIO enable descriptor Linus Walleij
2018-02-16 17:12   ` Applied "regulator: core: Support passing an initialized GPIO enable descriptor" to the regulator tree Mark Brown
2018-02-16 17:12     ` Mark Brown
2018-02-12 13:16 ` [PATCH 02/21] regulator: fixed: Convert to use GPIO descriptor only Linus Walleij
2018-02-12 15:13   ` Andy Shevchenko
2018-04-19 12:36     ` Linus Walleij
2018-02-12 13:16 ` Linus Walleij [this message]
2018-05-29 14:59   ` Applied "regulator: gpio: Get enable GPIO using GPIO descriptor" to the regulator tree Mark Brown
2018-05-29 14:59     ` Mark Brown
2018-02-12 13:17 ` [PATCH 04/21] regulator: da9055: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:59   ` Lee Jones
2018-02-16 17:12   ` Applied "regulator: da9055: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-02-16 17:12     ` Mark Brown
2018-02-12 13:17 ` [PATCH 05/21] regulator: arizona-ldo1: Look up a descriptor and pass to the core Linus Walleij
2018-02-13 11:06   ` Charles Keepax
2018-02-13 11:06     ` Charles Keepax
2018-04-19 13:43     ` Linus Walleij
2018-04-19 15:02       ` Charles Keepax
2018-04-19 15:02         ` Charles Keepax
2018-02-13 11:51   ` Charles Keepax
2018-02-13 11:51     ` Charles Keepax
2018-02-12 13:17 ` [PATCH 06/21] regulator: da9211: Pass descriptors instead of GPIO numbers Linus Walleij
2018-02-16 17:12   ` Applied "regulator: da9211: Pass descriptors instead of GPIO numbers" to the regulator tree Mark Brown
2018-02-16 17:12     ` Mark Brown
2018-02-12 13:17 ` [PATCH 07/21] regulator: max8973: Pass descriptor instead of GPIO number Linus Walleij
2018-05-24 19:14   ` Applied "regulator: max8973: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:14     ` Mark Brown
2018-02-12 13:17 ` [PATCH 08/21] regulator: max77686: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 13:37   ` Krzysztof Kozlowski
2018-02-12 13:17 ` [PATCH 09/21] regulator: lm363x: " Linus Walleij
2018-05-24 19:14   ` Applied "regulator: lm363x: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:14     ` Mark Brown
2018-02-12 13:17 ` [PATCH 10/21] regulator: lp8788-ldo: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:59   ` Lee Jones
2018-05-24 19:14   ` Applied "regulator: lp8788-ldo: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:14     ` Mark Brown
2018-02-12 13:17 ` [PATCH 11/21] regulator: max8952: Pass descriptor instead of GPIO number Linus Walleij
2018-05-24 19:14   ` Applied "regulator: max8952: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:14     ` Mark Brown
2018-02-12 13:17 ` [PATCH 12/21] regulator: pfuze100: Delete reference to ena_gpio Linus Walleij
2018-05-24 19:14   ` Applied "regulator: pfuze100: Delete reference to ena_gpio" to the regulator tree Mark Brown
2018-05-24 19:14     ` Mark Brown
2018-02-12 13:17 ` [PATCH 13/21] regulator: s2mps11: Pass descriptor instead of GPIO number Linus Walleij
2018-05-17 16:41   ` Applied "regulator: s2mps11: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-17 16:41     ` Mark Brown
2018-02-12 13:17 ` [PATCH 14/21] regulator: s5m8767: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-05-24 19:13   ` Applied "regulator: s5m8767: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:13     ` Mark Brown
2018-02-12 13:17 ` [PATCH 15/21] regulator: tps65090: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-05-24 19:13   ` Applied "regulator: tps65090: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown
2018-05-24 19:13     ` Mark Brown
2018-02-12 13:17 ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Linus Walleij
2018-02-12 14:58   ` Lee Jones
2018-02-13 11:11   ` Charles Keepax
2018-02-13 11:11     ` Charles Keepax
2018-04-19 13:55     ` Linus Walleij
2018-04-19 14:05       ` Mark Brown
2018-04-19 15:01       ` [PATCH] ARM: s3c64xx: Tidy up handling of regulator GPIO lookups Charles Keepax
2018-04-19 15:01         ` Charles Keepax
2018-05-14  5:54         ` Linus Walleij
2018-02-13 11:52   ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Charles Keepax
2018-02-13 11:52     ` Charles Keepax
2018-02-12 13:17 ` [PATCH 17/21] regulator: core: Only support passing enable GPIO descriptors Linus Walleij
2018-02-12 13:17 ` [PATCH 18/21] regulator: fixed/gpio: Pull inversion/OD into gpiolib Linus Walleij
2018-02-17  9:59   ` Robert Jarzmik
2018-02-12 13:17 ` [PATCH 19/21] regulator: fixed/gpio: Update device tree bindings Linus Walleij
2018-02-19  2:41   ` Rob Herring
2018-02-12 13:17 ` [PATCH 20/21] regulator: gpio: Convert to fully use descriptors Linus Walleij
2018-02-12 13:17 ` [PATCH 21/21] regulator: gpio: Simplify probe path Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180212131717.27193-4-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=philipp.zabel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.