From: Mark Brown <broonie@kernel.org> To: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>Mark Brown <broonie@kernel.org>, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.orgLee Jones <lee.jones@linaro.org>linux-kernel@vger.kernel.org Subject: Applied "regulator: da9055: Pass descriptor instead of GPIO number" to the regulator tree Date: Fri, 16 Feb 2018 17:12:21 +0000 [thread overview] Message-ID: <E1emjYb-00084h-2t@debutante> (raw) In-Reply-To: <20180212131717.27193-5-linus.walleij@linaro.org> The patch regulator: da9055: Pass descriptor instead of GPIO number has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 8d05560d1d011e5a842556efdbd70cc8a21499bb Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@linaro.org> Date: Mon, 12 Feb 2018 14:17:00 +0100 Subject: [PATCH] regulator: da9055: Pass descriptor instead of GPIO number When setting up a fixed regulator on the DA9055, pass a descriptor instead of a global GPIO number. This facility is not used in the kernel so we can easily just say that this should be a descriptor if/when put to use. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/da9055-regulator.c | 4 ++-- include/linux/mfd/da9055/pdata.h | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index d029c941a1e1..f40c3b8644ae 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -455,8 +456,7 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, char name[18]; int gpio_mux = pdata->gpio_ren[id]; - config->ena_gpio = pdata->ena_gpio[id]; - config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; + config->ena_gpiod = pdata->ena_gpiods[id]; config->ena_gpio_invert = 1; /* diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 04e092be4b07..1a94fa2ac309 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -12,6 +12,7 @@ #define DA9055_MAX_REGULATORS 8 struct da9055; +struct gpio_desc; enum gpio_select { NO_GPIO = 0, @@ -47,7 +48,7 @@ struct da9055_pdata { * controls the regulator set A/B, 0 if not available. */ enum gpio_select *reg_rsel; - /* GPIOs to enable regulator, 0 if not available */ - int *ena_gpio; + /* GPIO descriptors to enable regulator, NULL if not available */ + struct gpio_desc **ena_gpiods; }; #endif /* __DA9055_PDATA_H */ -- 2.16.1
WARNING: multiple messages have this Message-ID (diff)
From: Mark Brown <broonie@kernel.org> To: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Lee Jones <lee.jones@linaro.org>, linux-kernel@vger.kernel.org Subject: Applied "regulator: da9055: Pass descriptor instead of GPIO number" to the regulator tree Date: Fri, 16 Feb 2018 17:12:21 +0000 [thread overview] Message-ID: <E1emjYb-00084h-2t@debutante> (raw) In-Reply-To: <20180212131717.27193-5-linus.walleij@linaro.org> The patch regulator: da9055: Pass descriptor instead of GPIO number has been applied to the regulator tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 8d05560d1d011e5a842556efdbd70cc8a21499bb Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij@linaro.org> Date: Mon, 12 Feb 2018 14:17:00 +0100 Subject: [PATCH] regulator: da9055: Pass descriptor instead of GPIO number When setting up a fixed regulator on the DA9055, pass a descriptor instead of a global GPIO number. This facility is not used in the kernel so we can easily just say that this should be a descriptor if/when put to use. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/da9055-regulator.c | 4 ++-- include/linux/mfd/da9055/pdata.h | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index d029c941a1e1..f40c3b8644ae 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> @@ -455,8 +456,7 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, char name[18]; int gpio_mux = pdata->gpio_ren[id]; - config->ena_gpio = pdata->ena_gpio[id]; - config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH; + config->ena_gpiod = pdata->ena_gpiods[id]; config->ena_gpio_invert = 1; /* diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 04e092be4b07..1a94fa2ac309 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -12,6 +12,7 @@ #define DA9055_MAX_REGULATORS 8 struct da9055; +struct gpio_desc; enum gpio_select { NO_GPIO = 0, @@ -47,7 +48,7 @@ struct da9055_pdata { * controls the regulator set A/B, 0 if not available. */ enum gpio_select *reg_rsel; - /* GPIOs to enable regulator, 0 if not available */ - int *ena_gpio; + /* GPIO descriptors to enable regulator, NULL if not available */ + struct gpio_desc **ena_gpiods; }; #endif /* __DA9055_PDATA_H */ -- 2.16.1
next prev parent reply other threads:[~2018-02-16 17:12 UTC|newest] Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-02-12 13:16 [PATCH 00/21] regulator: switch core to GPIO descriptors Linus Walleij 2018-02-12 13:16 ` [PATCH 01/21] regulator: core: Support passing an initialized GPIO enable descriptor Linus Walleij 2018-02-16 17:12 ` Applied "regulator: core: Support passing an initialized GPIO enable descriptor" to the regulator tree Mark Brown 2018-02-16 17:12 ` Mark Brown 2018-02-12 13:16 ` [PATCH 02/21] regulator: fixed: Convert to use GPIO descriptor only Linus Walleij 2018-02-12 15:13 ` Andy Shevchenko 2018-04-19 12:36 ` Linus Walleij 2018-02-12 13:16 ` [PATCH 03/21] regulator: gpio: Get enable GPIO using GPIO descriptor Linus Walleij 2018-05-29 14:59 ` Applied "regulator: gpio: Get enable GPIO using GPIO descriptor" to the regulator tree Mark Brown 2018-05-29 14:59 ` Mark Brown 2018-02-12 13:17 ` [PATCH 04/21] regulator: da9055: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 14:59 ` Lee Jones 2018-02-16 17:12 ` Mark Brown [this message] 2018-02-16 17:12 ` Applied "regulator: da9055: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-02-12 13:17 ` [PATCH 05/21] regulator: arizona-ldo1: Look up a descriptor and pass to the core Linus Walleij 2018-02-13 11:06 ` Charles Keepax 2018-02-13 11:06 ` Charles Keepax 2018-04-19 13:43 ` Linus Walleij 2018-04-19 15:02 ` Charles Keepax 2018-04-19 15:02 ` Charles Keepax 2018-02-13 11:51 ` Charles Keepax 2018-02-13 11:51 ` Charles Keepax 2018-02-12 13:17 ` [PATCH 06/21] regulator: da9211: Pass descriptors instead of GPIO numbers Linus Walleij 2018-02-16 17:12 ` Applied "regulator: da9211: Pass descriptors instead of GPIO numbers" to the regulator tree Mark Brown 2018-02-16 17:12 ` Mark Brown 2018-02-12 13:17 ` [PATCH 07/21] regulator: max8973: Pass descriptor instead of GPIO number Linus Walleij 2018-05-24 19:14 ` Applied "regulator: max8973: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:14 ` Mark Brown 2018-02-12 13:17 ` [PATCH 08/21] regulator: max77686: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 13:37 ` Krzysztof Kozlowski 2018-02-12 13:17 ` [PATCH 09/21] regulator: lm363x: " Linus Walleij 2018-05-24 19:14 ` Applied "regulator: lm363x: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:14 ` Mark Brown 2018-02-12 13:17 ` [PATCH 10/21] regulator: lp8788-ldo: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 14:59 ` Lee Jones 2018-05-24 19:14 ` Applied "regulator: lp8788-ldo: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:14 ` Mark Brown 2018-02-12 13:17 ` [PATCH 11/21] regulator: max8952: Pass descriptor instead of GPIO number Linus Walleij 2018-05-24 19:14 ` Applied "regulator: max8952: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:14 ` Mark Brown 2018-02-12 13:17 ` [PATCH 12/21] regulator: pfuze100: Delete reference to ena_gpio Linus Walleij 2018-05-24 19:14 ` Applied "regulator: pfuze100: Delete reference to ena_gpio" to the regulator tree Mark Brown 2018-05-24 19:14 ` Mark Brown 2018-02-12 13:17 ` [PATCH 13/21] regulator: s2mps11: Pass descriptor instead of GPIO number Linus Walleij 2018-05-17 16:41 ` Applied "regulator: s2mps11: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-17 16:41 ` Mark Brown 2018-02-12 13:17 ` [PATCH 14/21] regulator: s5m8767: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 14:58 ` Lee Jones 2018-05-24 19:13 ` Applied "regulator: s5m8767: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:13 ` Mark Brown 2018-02-12 13:17 ` [PATCH 15/21] regulator: tps65090: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 14:58 ` Lee Jones 2018-05-24 19:13 ` Applied "regulator: tps65090: Pass descriptor instead of GPIO number" to the regulator tree Mark Brown 2018-05-24 19:13 ` Mark Brown 2018-02-12 13:17 ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Linus Walleij 2018-02-12 14:58 ` Lee Jones 2018-02-13 11:11 ` Charles Keepax 2018-02-13 11:11 ` Charles Keepax 2018-04-19 13:55 ` Linus Walleij 2018-04-19 14:05 ` Mark Brown 2018-04-19 15:01 ` [PATCH] ARM: s3c64xx: Tidy up handling of regulator GPIO lookups Charles Keepax 2018-04-19 15:01 ` Charles Keepax 2018-05-14 5:54 ` Linus Walleij 2018-02-13 11:52 ` [PATCH 16/21] regulator: wm8994: Pass descriptor instead of GPIO number Charles Keepax 2018-02-13 11:52 ` Charles Keepax 2018-02-12 13:17 ` [PATCH 17/21] regulator: core: Only support passing enable GPIO descriptors Linus Walleij 2018-02-12 13:17 ` [PATCH 18/21] regulator: fixed/gpio: Pull inversion/OD into gpiolib Linus Walleij 2018-02-17 9:59 ` Robert Jarzmik 2018-02-12 13:17 ` [PATCH 19/21] regulator: fixed/gpio: Update device tree bindings Linus Walleij 2018-02-19 2:41 ` Rob Herring 2018-02-12 13:17 ` [PATCH 20/21] regulator: gpio: Convert to fully use descriptors Linus Walleij 2018-02-12 13:17 ` [PATCH 21/21] regulator: gpio: Simplify probe path Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=E1emjYb-00084h-2t@debutante \ --to=broonie@kernel.org \ --cc=lee.jones@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linus.walleij@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.