All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: linux-nvdimm@lists.01.org, darrick.wong@oracle.com,
	david@fromorbit.com, linux-xfs@vger.kernel.org,
	linux-ext4@vger.kernel.org
Subject: Re: [PATCH v3 2/3] dax: change bdev_dax_supported() to support boolean returns
Date: Tue, 13 Feb 2018 13:31:48 -0700	[thread overview]
Message-ID: <20180213203148.GB13682@linux.intel.com> (raw)
In-Reply-To: <151813669915.15926.5489252461577531.stgit@djiang5-desk3.ch.intel.com>

On Thu, Feb 08, 2018 at 05:38:19PM -0700, Dave Jiang wrote:
> The function return values are confusing with the way the function is
> named. We expect a true or false return value but it actually returns
> 0/-errno.  This makes the code very confusing. Changing the return values
> to return a bool where if DAX is supported then return true and no DAX
> support returns false.
> 
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> ---

> diff --git a/fs/ext2/super.c b/fs/ext2/super.c
> index 655699321c45..636b9c5e1bff 100644
> --- a/fs/ext2/super.c
> +++ b/fs/ext2/super.c
> @@ -958,9 +958,10 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
>  	blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
>  
>  	if (sbi->s_mount_opt & EXT2_MOUNT_DAX) {
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if(!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

No need to set 'err' here.  This is just a temporary variable used for some
local checks later in the function.  'ret' is the value that will be returned,
and that is already initialized to -EINVAL which should be fine.

>  			goto failed_mount;
> +		}
>  	}
>  
>  	/* If the blocksize doesn't match, re-read the thing.. */
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 804a2d6729af..7b7650ac9c53 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -3712,9 +3712,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
>  					" that may contain inline data");
>  			goto failed_mount;
>  		}
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if (!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

Same comment as with the ext2 case - no need to set 'err', 'ret' is -EINVAL
and has you covered.
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm

WARNING: multiple messages have this Message-ID (diff)
From: Ross Zwisler <ross.zwisler-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Dave Jiang <dave.jiang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: linux-nvdimm-hn68Rpc1hR1g9hUCZPvPmw@public.gmane.org,
	darrick.wong-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org,
	david-FqsqvQoI3Ljby3iVrkZq2A@public.gmane.org,
	linux-xfs-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-ext4-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v3 2/3] dax: change bdev_dax_supported() to support boolean returns
Date: Tue, 13 Feb 2018 13:31:48 -0700	[thread overview]
Message-ID: <20180213203148.GB13682@linux.intel.com> (raw)
In-Reply-To: <151813669915.15926.5489252461577531.stgit-Cxk7aZI4ujnJARH06PadV2t3HXsI98Cx0E9HWUfgJXw@public.gmane.org>

On Thu, Feb 08, 2018 at 05:38:19PM -0700, Dave Jiang wrote:
> The function return values are confusing with the way the function is
> named. We expect a true or false return value but it actually returns
> 0/-errno.  This makes the code very confusing. Changing the return values
> to return a bool where if DAX is supported then return true and no DAX
> support returns false.
> 
> Signed-off-by: Dave Jiang <dave.jiang-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> ---

> diff --git a/fs/ext2/super.c b/fs/ext2/super.c
> index 655699321c45..636b9c5e1bff 100644
> --- a/fs/ext2/super.c
> +++ b/fs/ext2/super.c
> @@ -958,9 +958,10 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
>  	blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
>  
>  	if (sbi->s_mount_opt & EXT2_MOUNT_DAX) {
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if(!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

No need to set 'err' here.  This is just a temporary variable used for some
local checks later in the function.  'ret' is the value that will be returned,
and that is already initialized to -EINVAL which should be fine.

>  			goto failed_mount;
> +		}
>  	}
>  
>  	/* If the blocksize doesn't match, re-read the thing.. */
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 804a2d6729af..7b7650ac9c53 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -3712,9 +3712,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
>  					" that may contain inline data");
>  			goto failed_mount;
>  		}
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if (!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

Same comment as with the ext2 case - no need to set 'err', 'ret' is -EINVAL
and has you covered.

WARNING: multiple messages have this Message-ID (diff)
From: Ross Zwisler <ross.zwisler@linux.intel.com>
To: Dave Jiang <dave.jiang@intel.com>
Cc: darrick.wong@oracle.com, linux-nvdimm@lists.01.org,
	david@fromorbit.com, linux-xfs@vger.kernel.org,
	ross.zwisler@linux.intel.com, linux-ext4@vger.kernel.org,
	dan.j.williams@intel.com
Subject: Re: [PATCH v3 2/3] dax: change bdev_dax_supported() to support boolean returns
Date: Tue, 13 Feb 2018 13:31:48 -0700	[thread overview]
Message-ID: <20180213203148.GB13682@linux.intel.com> (raw)
In-Reply-To: <151813669915.15926.5489252461577531.stgit@djiang5-desk3.ch.intel.com>

On Thu, Feb 08, 2018 at 05:38:19PM -0700, Dave Jiang wrote:
> The function return values are confusing with the way the function is
> named. We expect a true or false return value but it actually returns
> 0/-errno.  This makes the code very confusing. Changing the return values
> to return a bool where if DAX is supported then return true and no DAX
> support returns false.
> 
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> ---

> diff --git a/fs/ext2/super.c b/fs/ext2/super.c
> index 655699321c45..636b9c5e1bff 100644
> --- a/fs/ext2/super.c
> +++ b/fs/ext2/super.c
> @@ -958,9 +958,10 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
>  	blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
>  
>  	if (sbi->s_mount_opt & EXT2_MOUNT_DAX) {
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if(!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

No need to set 'err' here.  This is just a temporary variable used for some
local checks later in the function.  'ret' is the value that will be returned,
and that is already initialized to -EINVAL which should be fine.

>  			goto failed_mount;
> +		}
>  	}
>  
>  	/* If the blocksize doesn't match, re-read the thing.. */
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 804a2d6729af..7b7650ac9c53 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -3712,9 +3712,10 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
>  					" that may contain inline data");
>  			goto failed_mount;
>  		}
> -		err = sb_dax_supported(sb, blocksize);
> -		if (err)
> +		if (!sb_dax_supported(sb, blocksize)) {
> +			err = -EIO;

Same comment as with the ext2 case - no need to set 'err', 'ret' is -EINVAL
and has you covered.

  reply	other threads:[~2018-02-13 20:25 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-09  0:38 [PATCH v3 0/3] minimal DAX support for XFS realtime device Dave Jiang
2018-02-09  0:38 ` Dave Jiang
2018-02-09  0:38 ` [PATCH v3 1/3] fs: allow per-device dax status checking for filesystems Dave Jiang
2018-02-09  0:38   ` Dave Jiang
2018-02-09  0:38 ` [PATCH v3 2/3] dax: change bdev_dax_supported() to support boolean returns Dave Jiang
2018-02-09  0:38   ` Dave Jiang
2018-02-09  0:38   ` Dave Jiang
2018-02-13 20:31   ` Ross Zwisler [this message]
2018-02-13 20:31     ` Ross Zwisler
2018-02-13 20:31     ` Ross Zwisler
2018-02-13 20:35     ` Dave Jiang
2018-02-13 20:35       ` Dave Jiang
2018-02-13 20:43       ` Ross Zwisler
2018-02-13 20:43         ` Ross Zwisler
2018-02-09  0:38 ` [PATCH v3 3/3] xfs: reject removal of realtime flag when datadev doesn't support DAX Dave Jiang
2018-02-09  0:38   ` Dave Jiang
2018-02-09  0:38   ` Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180213203148.GB13682@linux.intel.com \
    --to=ross.zwisler@linux.intel.com \
    --cc=darrick.wong@oracle.com \
    --cc=dave.jiang@intel.com \
    --cc=david@fromorbit.com \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.