* [Buildroot] [PATCH v2 1/3] imx-mkimage: new package
2018-02-22 10:02 [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson
@ 2018-02-22 10:02 ` Erik Larsson
2018-02-22 14:37 ` Marcus Folkesson
2018-02-25 8:43 ` Baruch Siach
2018-02-22 10:02 ` [Buildroot] [PATCH v2 2/3] firmware-imx: add support for iMX8M firmware Erik Larsson
` (3 subsequent siblings)
4 siblings, 2 replies; 16+ messages in thread
From: Erik Larsson @ 2018-02-22 10:02 UTC (permalink / raw)
To: buildroot
This package add support for imx-mkimage for iMX8M.
Currently the only hardware it's tested for.
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
---
| 1 +
| 28 +++++++++++++++
| 11 ++++++
| 3 ++
| 41 ++++++++++++++++++++++
5 files changed, 84 insertions(+)
create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch
create mode 100644 package/imx-mkimage/Config.in.host
create mode 100644 package/imx-mkimage/imx-mkimage.hash
create mode 100644 package/imx-mkimage/imx-mkimage.mk
--git a/package/Config.in.host b/package/Config.in.host
index 199a8e9..06ef5cb 100644
--- a/package/Config.in.host
+++ b/package/Config.in.host
@@ -24,6 +24,7 @@ menu "Host utilities"
source "package/go-bootstrap/Config.in.host"
source "package/google-breakpad/Config.in.host"
source "package/gptfdisk/Config.in.host"
+ source "package/imx-mkimage/Config.in.host"
source "package/imx-usb-loader/Config.in.host"
source "package/jq/Config.in.host"
source "package/jsmin/Config.in.host"
--git a/package/imx-mkimage/0001-remove-git-build-info.patch b/package/imx-mkimage/0001-remove-git-build-info.patch
new file mode 100644
index 0000000..e472133
--- /dev/null
+++ b/package/imx-mkimage/0001-remove-git-build-info.patch
@@ -0,0 +1,28 @@
+From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001
+From: Erik Larsson <erik.larsson@combitech.se>
+Date: Thu, 22 Feb 2018 09:56:53 +0100
+Subject: [PATCH] Remove buildinformation step.
+
+Signed-off-by: Erik Larsson <erik.larsson@combitech.se>
+---
+ Makefile | 4 +---
+ 1 file changed, 1 insertion(+), 3 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 4b449ad..4042a39 100644
+--- a/Makefile
++++ b/Makefile
+@@ -33,9 +33,7 @@ $(MKIMG): buildinfo $(SRCS)
+ bin: $(MKIMG)
+
+ buildinfo:
+- @echo -n '#define MKIMAGE_COMMIT 0x' > src/build_info.h
+- @git rev-parse --short=8 HEAD >> src/build_info.h
+- @echo '' >> src/build_info.h
++ @echo "#define MKIMAGE_COMMIT 0x0000" > src/build_info.h
+
+ help:
+ @echo $(CURR_DIR)
+--
+2.7.4
+
--git a/package/imx-mkimage/Config.in.host b/package/imx-mkimage/Config.in.host
new file mode 100644
index 0000000..411f67c
--- /dev/null
+++ b/package/imx-mkimage/Config.in.host
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_HOST_IMX_MKIMAGE
+ bool "host imx-mkimage"
+ select BR2_PACKAGE_HOST_UBOOT_TOOLS
+ select BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT
+ depends on BR2_LINUX_KERNEL
+ depends on BR2_TARGET_UBOOT
+ help
+ imx-mkimage is used to combine input images and generate
+ final boot image with appropriate IVT set.
+
+ https://source.codeaurora.org/external/imx/imx-mkimage
--git a/package/imx-mkimage/imx-mkimage.hash b/package/imx-mkimage/imx-mkimage.hash
new file mode 100644
index 0000000..08d31ce
--- /dev/null
+++ b/package/imx-mkimage/imx-mkimage.hash
@@ -0,0 +1,3 @@
+# Locally calculated
+sha256 4ddb144520001c33baa24493f68ef2ea9434ac36bf3ae223f78d7ec581aa484c imx-mkimage-imx_4.9.51_imx8m_beta.tar.gz
+sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c iMX8dv/COPYING
--git a/package/imx-mkimage/imx-mkimage.mk b/package/imx-mkimage/imx-mkimage.mk
new file mode 100644
index 0000000..e3c62bb
--- /dev/null
+++ b/package/imx-mkimage/imx-mkimage.mk
@@ -0,0 +1,41 @@
+################################################################################
+#
+# imx-mkimage
+#
+################################################################################
+
+IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta
+IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage
+IMX_MKIMAGE_SITE_METHOD = git
+IMX_MKIMAGE_LICENSE = GPL-2.0
+IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING
+HOST_IMX_MKIMAGE_DEPENDENCIES = uboot linux firmware-imx arm-trusted-firmware
+
+define HOST_IMX_MKIMAGE_BUILD_CMDS
+ # These files are generated by firmware-imx, uboot and arm-trusted-firmware
+ # Copy the files into the iMX8M folder to make building of this package simple
+ # The NXP engineers has constructed to buildprocess with a bunch of hardcoded
+ # file names and pathes.
+
+ # Currently this only supports iMX8M. When more hardware is available
+ # this needs to be selectable based on iMX8-version (iMX8M,iMXQ etc).
+ cp $(BINARIES_DIR)/u-boot-spl.bin $(@D)/iMX8M
+ cp $(BINARIES_DIR)/lpddr4_pmu_train* $(@D)/iMX8M
+ cp $(BINARIES_DIR)/fsl-imx8mq-evk.dtb $(@D)/iMX8M
+ cp $(BINARIES_DIR)/bl31.bin $(@D)/iMX8M
+
+ # We must rename this file because mkimage_fit_atf.sh has hardcoded names
+ cp ${BINARIES_DIR}/u-boot.bin $(@D)/iMX8M/u-boot-nodtb.bin
+
+ # In soc.mk it's hardcoded that the mkimage tool is named mkimage_uboot
+ # and that it's located in the iMX8M folder.
+ cp $(HOST_DIR)/bin/mkimage $(@D)/iMX8M/mkimage_uboot
+
+ $(MAKE) -C $(@D) SOC=iMX8M flash_spl_uboot
+endef
+
+define HOST_IMX_MKIMAGE_INSTALL_CMDS
+ $(INSTALL) -D -m 755 $(@D)/iMX8M/flash.bin $(BINARIES_DIR)/imx-boot-imx8mqevk-sd.bin
+endef
+
+$(eval $(host-generic-package))
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 1/3] imx-mkimage: new package
2018-02-22 10:02 ` [Buildroot] [PATCH v2 1/3] imx-mkimage: new package Erik Larsson
@ 2018-02-22 14:37 ` Marcus Folkesson
2018-02-25 8:43 ` Baruch Siach
1 sibling, 0 replies; 16+ messages in thread
From: Marcus Folkesson @ 2018-02-22 14:37 UTC (permalink / raw)
To: buildroot
Erik,
On Thu, Feb 22, 2018 at 11:02:56AM +0100, Erik Larsson wrote:
> This package add support for imx-mkimage for iMX8M.
> Currently the only hardware it's tested for.
>
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Still no Crille nor Marcus? :-)
Same for the all patches in this set.
> ---
> package/Config.in.host | 1 +
> .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++
> package/imx-mkimage/Config.in.host | 11 ++++++
> package/imx-mkimage/imx-mkimage.hash | 3 ++
> package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++
> 5 files changed, 84 insertions(+)
> create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch
> create mode 100644 package/imx-mkimage/Config.in.host
> create mode 100644 package/imx-mkimage/imx-mkimage.hash
> create mode 100644 package/imx-mkimage/imx-mkimage.mk
>
> diff --git a/package/Config.in.host b/package/Config.in.host
> index 199a8e9..06ef5cb 100644
> --- a/package/Config.in.host
> +++ b/package/Config.in.host
> @@ -24,6 +24,7 @@ menu "Host utilities"
> source "package/go-bootstrap/Config.in.host"
> source "package/google-breakpad/Config.in.host"
> source "package/gptfdisk/Config.in.host"
> + source "package/imx-mkimage/Config.in.host"
> source "package/imx-usb-loader/Config.in.host"
> source "package/jq/Config.in.host"
> source "package/jsmin/Config.in.host"
> diff --git a/package/imx-mkimage/0001-remove-git-build-info.patch b/package/imx-mkimage/0001-remove-git-build-info.patch
> new file mode 100644
> index 0000000..e472133
> --- /dev/null
> +++ b/package/imx-mkimage/0001-remove-git-build-info.patch
> @@ -0,0 +1,28 @@
> +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001
> +From: Erik Larsson <erik.larsson@combitech.se>
> +Date: Thu, 22 Feb 2018 09:56:53 +0100
> +Subject: [PATCH] Remove buildinformation step.
> +
> +Signed-off-by: Erik Larsson <erik.larsson@combitech.se>
> +---
> + Makefile | 4 +---
> + 1 file changed, 1 insertion(+), 3 deletions(-)
> +
> +diff --git a/Makefile b/Makefile
> +index 4b449ad..4042a39 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -33,9 +33,7 @@ $(MKIMG): buildinfo $(SRCS)
> + bin: $(MKIMG)
> +
> + buildinfo:
> +- @echo -n '#define MKIMAGE_COMMIT 0x' > src/build_info.h
> +- @git rev-parse --short=8 HEAD >> src/build_info.h
> +- @echo '' >> src/build_info.h
> ++ @echo "#define MKIMAGE_COMMIT 0x0000" > src/build_info.h
> +
> + help:
> + @echo $(CURR_DIR)
> +--
> +2.7.4
> +
> diff --git a/package/imx-mkimage/Config.in.host b/package/imx-mkimage/Config.in.host
> new file mode 100644
> index 0000000..411f67c
> --- /dev/null
> +++ b/package/imx-mkimage/Config.in.host
> @@ -0,0 +1,11 @@
> +config BR2_PACKAGE_HOST_IMX_MKIMAGE
> + bool "host imx-mkimage"
> + select BR2_PACKAGE_HOST_UBOOT_TOOLS
> + select BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT
> + depends on BR2_LINUX_KERNEL
> + depends on BR2_TARGET_UBOOT
> + help
> + imx-mkimage is used to combine input images and generate
> + final boot image with appropriate IVT set.
> +
> + https://source.codeaurora.org/external/imx/imx-mkimage
> diff --git a/package/imx-mkimage/imx-mkimage.hash b/package/imx-mkimage/imx-mkimage.hash
> new file mode 100644
> index 0000000..08d31ce
> --- /dev/null
> +++ b/package/imx-mkimage/imx-mkimage.hash
> @@ -0,0 +1,3 @@
> +# Locally calculated
> +sha256 4ddb144520001c33baa24493f68ef2ea9434ac36bf3ae223f78d7ec581aa484c imx-mkimage-imx_4.9.51_imx8m_beta.tar.gz
> +sha256 231f7edcc7352d7734a96eef0b8030f77982678c516876fcb81e25b32d68564c iMX8dv/COPYING
> diff --git a/package/imx-mkimage/imx-mkimage.mk b/package/imx-mkimage/imx-mkimage.mk
> new file mode 100644
> index 0000000..e3c62bb
> --- /dev/null
> +++ b/package/imx-mkimage/imx-mkimage.mk
> @@ -0,0 +1,41 @@
> +################################################################################
> +#
> +# imx-mkimage
> +#
> +################################################################################
> +
> +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta
> +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage
> +IMX_MKIMAGE_SITE_METHOD = git
> +IMX_MKIMAGE_LICENSE = GPL-2.0
The license is GPL-2.0+ as pointed out in v1.
Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180222/8dab871e/attachment.asc>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 1/3] imx-mkimage: new package
2018-02-22 10:02 ` [Buildroot] [PATCH v2 1/3] imx-mkimage: new package Erik Larsson
2018-02-22 14:37 ` Marcus Folkesson
@ 2018-02-25 8:43 ` Baruch Siach
2018-02-27 4:26 ` Erik Larsson
1 sibling, 1 reply; 16+ messages in thread
From: Baruch Siach @ 2018-02-25 8:43 UTC (permalink / raw)
To: buildroot
Hi Erik,
On Thu, Feb 22, 2018 at 11:02:56AM +0100, Erik Larsson wrote:
> This package add support for imx-mkimage for iMX8M.
> Currently the only hardware it's tested for.
>
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
> ---
> package/Config.in.host | 1 +
> .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++
> package/imx-mkimage/Config.in.host | 11 ++++++
> package/imx-mkimage/imx-mkimage.hash | 3 ++
> package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++
> 5 files changed, 84 insertions(+)
> create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch
> create mode 100644 package/imx-mkimage/Config.in.host
> create mode 100644 package/imx-mkimage/imx-mkimage.hash
> create mode 100644 package/imx-mkimage/imx-mkimage.mk
>
> diff --git a/package/Config.in.host b/package/Config.in.host
> index 199a8e9..06ef5cb 100644
> --- a/package/Config.in.host
> +++ b/package/Config.in.host
> @@ -24,6 +24,7 @@ menu "Host utilities"
> source "package/go-bootstrap/Config.in.host"
> source "package/google-breakpad/Config.in.host"
> source "package/gptfdisk/Config.in.host"
> + source "package/imx-mkimage/Config.in.host"
> source "package/imx-usb-loader/Config.in.host"
> source "package/jq/Config.in.host"
> source "package/jsmin/Config.in.host"
> diff --git a/package/imx-mkimage/0001-remove-git-build-info.patch b/package/imx-mkimage/0001-remove-git-build-info.patch
> new file mode 100644
> index 0000000..e472133
> --- /dev/null
> +++ b/package/imx-mkimage/0001-remove-git-build-info.patch
> @@ -0,0 +1,28 @@
> +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001
> +From: Erik Larsson <erik.larsson@combitech.se>
> +Date: Thu, 22 Feb 2018 09:56:53 +0100
> +Subject: [PATCH] Remove buildinformation step.
> +
> +Signed-off-by: Erik Larsson <erik.larsson@combitech.se>
> +---
[snip]
> diff --git a/package/imx-mkimage/imx-mkimage.mk b/package/imx-mkimage/imx-mkimage.mk
> new file mode 100644
> index 0000000..e3c62bb
> --- /dev/null
> +++ b/package/imx-mkimage/imx-mkimage.mk
> @@ -0,0 +1,41 @@
> +################################################################################
> +#
> +# imx-mkimage
> +#
> +################################################################################
> +
> +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta
> +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage
> +IMX_MKIMAGE_SITE_METHOD = git
> +IMX_MKIMAGE_LICENSE = GPL-2.0
> +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING
> +HOST_IMX_MKIMAGE_DEPENDENCIES = uboot linux firmware-imx arm-trusted-firmware
> +
> +define HOST_IMX_MKIMAGE_BUILD_CMDS
> + # These files are generated by firmware-imx, uboot and arm-trusted-firmware
> + # Copy the files into the iMX8M folder to make building of this package simple
> + # The NXP engineers has constructed to buildprocess with a bunch of hardcoded
> + # file names and pathes.
> +
> + # Currently this only supports iMX8M. When more hardware is available
> + # this needs to be selectable based on iMX8-version (iMX8M,iMXQ etc).
> + cp $(BINARIES_DIR)/u-boot-spl.bin $(@D)/iMX8M
> + cp $(BINARIES_DIR)/lpddr4_pmu_train* $(@D)/iMX8M
> + cp $(BINARIES_DIR)/fsl-imx8mq-evk.dtb $(@D)/iMX8M
> + cp $(BINARIES_DIR)/bl31.bin $(@D)/iMX8M
> +
> + # We must rename this file because mkimage_fit_atf.sh has hardcoded names
> + cp ${BINARIES_DIR}/u-boot.bin $(@D)/iMX8M/u-boot-nodtb.bin
While testing here again I have seen that NXP provided U-Boot generates an
image named u-boot-nodtb.bin in top level directory, which is not the same as
u-boot.bin. So you might want to set BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME to
u-boot-nodtb.bin, and copy that file directly, without rename.
baruch
> +
> + # In soc.mk it's hardcoded that the mkimage tool is named mkimage_uboot
> + # and that it's located in the iMX8M folder.
> + cp $(HOST_DIR)/bin/mkimage $(@D)/iMX8M/mkimage_uboot
> +
> + $(MAKE) -C $(@D) SOC=iMX8M flash_spl_uboot
> +endef
> +
> +define HOST_IMX_MKIMAGE_INSTALL_CMDS
> + $(INSTALL) -D -m 755 $(@D)/iMX8M/flash.bin $(BINARIES_DIR)/imx-boot-imx8mqevk-sd.bin
> +endef
> +
> +$(eval $(host-generic-package))
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 1/3] imx-mkimage: new package
2018-02-25 8:43 ` Baruch Siach
@ 2018-02-27 4:26 ` Erik Larsson
0 siblings, 0 replies; 16+ messages in thread
From: Erik Larsson @ 2018-02-27 4:26 UTC (permalink / raw)
To: buildroot
Hi Baruch,
2018-02-25 9:43 GMT+01:00 Baruch Siach <baruch@tkos.co.il>:
> Hi Erik,
>
> On Thu, Feb 22, 2018 at 11:02:56AM +0100, Erik Larsson wrote:
>> This package add support for imx-mkimage for iMX8M.
>> Currently the only hardware it's tested for.
>>
>> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
>> ---
>> package/Config.in.host | 1 +
>> .../imx-mkimage/0001-remove-git-build-info.patch | 28 +++++++++++++++
>> package/imx-mkimage/Config.in.host | 11 ++++++
>> package/imx-mkimage/imx-mkimage.hash | 3 ++
>> package/imx-mkimage/imx-mkimage.mk | 41 ++++++++++++++++++++++
>> 5 files changed, 84 insertions(+)
>> create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch
>> create mode 100644 package/imx-mkimage/Config.in.host
>> create mode 100644 package/imx-mkimage/imx-mkimage.hash
>> create mode 100644 package/imx-mkimage/imx-mkimage.mk
>>
>> diff --git a/package/Config.in.host b/package/Config.in.host
>> index 199a8e9..06ef5cb 100644
>> --- a/package/Config.in.host
>> +++ b/package/Config.in.host
>> @@ -24,6 +24,7 @@ menu "Host utilities"
>> source "package/go-bootstrap/Config.in.host"
>> source "package/google-breakpad/Config.in.host"
>> source "package/gptfdisk/Config.in.host"
>> + source "package/imx-mkimage/Config.in.host"
>> source "package/imx-usb-loader/Config.in.host"
>> source "package/jq/Config.in.host"
>> source "package/jsmin/Config.in.host"
>> diff --git a/package/imx-mkimage/0001-remove-git-build-info.patch b/package/imx-mkimage/0001-remove-git-build-info.patch
>> new file mode 100644
>> index 0000000..e472133
>> --- /dev/null
>> +++ b/package/imx-mkimage/0001-remove-git-build-info.patch
>> @@ -0,0 +1,28 @@
>> +From d1bb893300b1bd80eaac27fcc8eb4347f56f83b4 Mon Sep 17 00:00:00 2001
>> +From: Erik Larsson <erik.larsson@combitech.se>
>> +Date: Thu, 22 Feb 2018 09:56:53 +0100
>> +Subject: [PATCH] Remove buildinformation step.
>> +
>> +Signed-off-by: Erik Larsson <erik.larsson@combitech.se>
>> +---
>
> [snip]
>
>> diff --git a/package/imx-mkimage/imx-mkimage.mk b/package/imx-mkimage/imx-mkimage.mk
>> new file mode 100644
>> index 0000000..e3c62bb
>> --- /dev/null
>> +++ b/package/imx-mkimage/imx-mkimage.mk
>> @@ -0,0 +1,41 @@
>> +################################################################################
>> +#
>> +# imx-mkimage
>> +#
>> +################################################################################
>> +
>> +IMX_MKIMAGE_VERSION = imx_4.9.51_imx8m_beta
>> +IMX_MKIMAGE_SITE = https://source.codeaurora.org/external/imx/imx-mkimage
>> +IMX_MKIMAGE_SITE_METHOD = git
>> +IMX_MKIMAGE_LICENSE = GPL-2.0
>> +IMX_MKIMAGE_LICENSE_FILES = iMX8dv/COPYING
>> +HOST_IMX_MKIMAGE_DEPENDENCIES = uboot linux firmware-imx arm-trusted-firmware
>> +
>> +define HOST_IMX_MKIMAGE_BUILD_CMDS
>> + # These files are generated by firmware-imx, uboot and arm-trusted-firmware
>> + # Copy the files into the iMX8M folder to make building of this package simple
>> + # The NXP engineers has constructed to buildprocess with a bunch of hardcoded
>> + # file names and pathes.
>> +
>> + # Currently this only supports iMX8M. When more hardware is available
>> + # this needs to be selectable based on iMX8-version (iMX8M,iMXQ etc).
>> + cp $(BINARIES_DIR)/u-boot-spl.bin $(@D)/iMX8M
>> + cp $(BINARIES_DIR)/lpddr4_pmu_train* $(@D)/iMX8M
>> + cp $(BINARIES_DIR)/fsl-imx8mq-evk.dtb $(@D)/iMX8M
>> + cp $(BINARIES_DIR)/bl31.bin $(@D)/iMX8M
>> +
>> + # We must rename this file because mkimage_fit_atf.sh has hardcoded names
>> + cp ${BINARIES_DIR}/u-boot.bin $(@D)/iMX8M/u-boot-nodtb.bin
>
> While testing here again I have seen that NXP provided U-Boot generates an
> image named u-boot-nodtb.bin in top level directory, which is not the same as
> u-boot.bin. So you might want to set BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME to
> u-boot-nodtb.bin, and copy that file directly, without rename.
Thank you! I'll test that,
>
> baruch
>
>> +
>> + # In soc.mk it's hardcoded that the mkimage tool is named mkimage_uboot
>> + # and that it's located in the iMX8M folder.
>> + cp $(HOST_DIR)/bin/mkimage $(@D)/iMX8M/mkimage_uboot
>> +
>> + $(MAKE) -C $(@D) SOC=iMX8M flash_spl_uboot
>> +endef
>> +
>> +define HOST_IMX_MKIMAGE_INSTALL_CMDS
>> + $(INSTALL) -D -m 755 $(@D)/iMX8M/flash.bin $(BINARIES_DIR)/imx-boot-imx8mqevk-sd.bin
>> +endef
>> +
>> +$(eval $(host-generic-package))
>
> --
> http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
> - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
/Erik
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 2/3] firmware-imx: add support for iMX8M firmware
2018-02-22 10:02 [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson
2018-02-22 10:02 ` [Buildroot] [PATCH v2 1/3] imx-mkimage: new package Erik Larsson
@ 2018-02-22 10:02 ` Erik Larsson
2018-02-23 10:40 ` Gary Bisson
2018-02-22 10:02 ` [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board Erik Larsson
` (2 subsequent siblings)
4 siblings, 1 reply; 16+ messages in thread
From: Erik Larsson @ 2018-02-22 10:02 UTC (permalink / raw)
To: buildroot
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
---
| 4 +++-
| 2 +-
| 8 ++++++++
3 files changed, 12 insertions(+), 2 deletions(-)
--git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
index b5e5ab2..b5df642 100644
--- a/package/freescale-imx/Config.in
+++ b/package/freescale-imx/Config.in
@@ -1,6 +1,6 @@
menuconfig BR2_PACKAGE_FREESCALE_IMX
bool "Freescale i.MX libraries"
- depends on BR2_arm
+ depends on BR2_arm || BR2_aarch64
help
Those packages provide hardware acceleration for GPU or VPU,
hardware optimization or some hardware tools for Freescale
@@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL
config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7
bool "imx7d/imx7ulp"
+config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
+ bool "imx8m"
endchoice
config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
--git a/package/freescale-imx/firmware-imx/Config.in b/package/freescale-imx/firmware-imx/Config.in
index fca280a..56d5b80 100644
--- a/package/freescale-imx/firmware-imx/Config.in
+++ b/package/freescale-imx/firmware-imx/Config.in
@@ -1,6 +1,6 @@
config BR2_PACKAGE_FIRMWARE_IMX
bool "firmware-imx"
- depends on BR2_arm # Only relevant for i.MX
+ depends on BR2_arm || BR2_aarch64 # Only relevant for i.MX
help
Firmware blobs for the Freescale i.MX SoCs.
--git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 630afca..f03daf2 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -18,6 +18,13 @@ define FIRMWARE_IMX_EXTRACT_CMDS
$(call FREESCALE_IMX_EXTRACT_HELPER,$(DL_DIR)/$(FIRMWARE_IMX_SOURCE))
endef
+ifeq ($(BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M),y)
+FIRMWARE_IMX_INSTALL_IMAGES = YES
+define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
+ cp $(@D)/firmware/ddr/synopsys/lpddr4_pmu_train_*.bin $(BINARIES_DIR)
+ cp $(@D)/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(BINARIES_DIR)
+endef
+else
define FIRMWARE_IMX_INSTALL_TARGET_CMDS
mkdir -p $(TARGET_DIR)/lib/firmware/imx
for blobdir in $(FIRMWARE_IMX_BLOBS); do \
@@ -27,5 +34,6 @@ define FIRMWARE_IMX_INSTALL_TARGET_CMDS
mv $(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw.nonrestricted \
$(TARGET_DIR)/lib/firmware/imx/epdc/epdc_ED060XH2C1.fw
endef
+endif
$(eval $(generic-package))
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 2/3] firmware-imx: add support for iMX8M firmware
2018-02-22 10:02 ` [Buildroot] [PATCH v2 2/3] firmware-imx: add support for iMX8M firmware Erik Larsson
@ 2018-02-23 10:40 ` Gary Bisson
0 siblings, 0 replies; 16+ messages in thread
From: Gary Bisson @ 2018-02-23 10:40 UTC (permalink / raw)
To: buildroot
Hi Erik,
On Thu, Feb 22, 2018 at 11:02:57AM +0100, Erik Larsson wrote:
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
> ---
> package/freescale-imx/Config.in | 4 +++-
> package/freescale-imx/firmware-imx/Config.in | 2 +-
> package/freescale-imx/firmware-imx/firmware-imx.mk | 8 ++++++++
> 3 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/package/freescale-imx/Config.in b/package/freescale-imx/Config.in
> index b5e5ab2..b5df642 100644
> --- a/package/freescale-imx/Config.in
> +++ b/package/freescale-imx/Config.in
> @@ -1,6 +1,6 @@
> menuconfig BR2_PACKAGE_FREESCALE_IMX
> bool "Freescale i.MX libraries"
> - depends on BR2_arm
> + depends on BR2_arm || BR2_aarch64
> help
> Those packages provide hardware acceleration for GPU or VPU,
> hardware optimization or some hardware tools for Freescale
> @@ -40,6 +40,8 @@ config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6UL
> config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX7
> bool "imx7d/imx7ulp"
>
> +config BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M
> + bool "imx8m"
> endchoice
>
> config BR2_PACKAGE_FREESCALE_IMX_PLATFORM
I actually this should be a separate patch that just adds i.MX8M to the
list of supported devices.
Also it is missing BR2_PACKAGE_FREESCALE_IMX_PLATFORM assignment to
"IMX8" in order to match Yocto platform naming.
Finally, as an optional step we could hide packages that don't apply to
that architecture such as imx-lib, but that can come later.
Regards,
Gary
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-22 10:02 [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson
2018-02-22 10:02 ` [Buildroot] [PATCH v2 1/3] imx-mkimage: new package Erik Larsson
2018-02-22 10:02 ` [Buildroot] [PATCH v2 2/3] firmware-imx: add support for iMX8M firmware Erik Larsson
@ 2018-02-22 10:02 ` Erik Larsson
2018-02-23 10:43 ` Gary Bisson
` (2 more replies)
2018-02-22 14:30 ` [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Marcus Folkesson
2018-02-25 21:19 ` Thomas Petazzoni
4 siblings, 3 replies; 16+ messages in thread
From: Erik Larsson @ 2018-02-22 10:02 UTC (permalink / raw)
To: buildroot
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
---
| 40 ++
| 10 +-
| 625 +++++++++++++++++++++
| 37 ++
4 files changed, 709 insertions(+), 3 deletions(-)
create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8
create mode 100644 board/freescale/imx8mqevk/linux-4.9.config
create mode 100644 configs/freescale_imx8mqevk_defconfig
--git a/board/freescale/common/imx/genimage.cfg.template_imx8 b/board/freescale/common/imx/genimage.cfg.template_imx8
new file mode 100644
index 0000000..138beff
--- /dev/null
+++ b/board/freescale/common/imx/genimage.cfg.template_imx8
@@ -0,0 +1,40 @@
+# Minimal SD card image for the Freescale boards Template for SPL Boot
+#
+# We mimic the .sdcard Freescale's image format:
+# * the SD card must have 33 kB free space at the beginning,
+# * U-Boot is integrated into imx-boot-imx8mqevk-sd.bin and is dumped as is,
+# * a FAT partition at offset 64MB is containing Image and DTB files
+# * a single root filesystem partition is required (ext2, ext3 or ext4)
+#
+
+image boot.vfat {
+ vfat {
+ files = {
+ %FILES%
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition imx-boot {
+ in-partition-table = "no"
+ image = "imx-boot-imx8mqevk-sd.bin"
+ offset = 33K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ offset = 8M
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext2"
+ }
+}
--git a/board/freescale/common/imx/post-image.sh b/board/freescale/common/imx/post-image.sh
index b239743..264c8a4 100755
--- a/board/freescale/common/imx/post-image.sh
+++ b/board/freescale/common/imx/post-image.sh
@@ -7,10 +7,10 @@
#
dtb_list()
{
- local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
+ local DTB_LIST="$(sed -n 's/^BR2_LINUX_KERNEL_INTREE_DTS_NAME="\([\/a-z0-9 \-]*\)"$/\1/p' ${BR2_CONFIG})"
for dt in $DTB_LIST; do
- echo -n "\"$dt.dtb\", "
+ echo -n "\"`basename $dt`.dtb\", "
done
}
@@ -23,6 +23,8 @@ linux_image()
{
if grep -Eq "^BR2_LINUX_KERNEL_UIMAGE=y$" ${BR2_CONFIG}; then
echo "\"uImage\""
+ elif grep -Eq "^BR2_LINUX_KERNEL_IMAGE=y$" ${BR2_CONFIG}; then
+ echo "\"Image\""
else
echo "\"zImage\""
fi
@@ -30,7 +32,9 @@ linux_image()
genimage_type()
{
- if grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
+ if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
+ echo "genimage.cfg.template_imx8"
+ elif grep -Eq "^BR2_TARGET_UBOOT_SPL=y$" ${BR2_CONFIG}; then
echo "genimage.cfg.template_spl"
else
echo "genimage.cfg.template"
--git a/board/freescale/imx8mqevk/linux-4.9.config b/board/freescale/imx8mqevk/linux-4.9.config
new file mode 100644
index 0000000..f6c32cd
--- /dev/null
+++ b/board/freescale/imx8mqevk/linux-4.9.config
@@ -0,0 +1,625 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VULCAN=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARCH_FSL_IMX8QM=y
+CONFIG_ARCH_FSL_IMX8QXP=y
+CONFIG_ARCH_FSL_IMX8MQ=y
+CONFIG_PCI=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_IMX6=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_PCI_HISI=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
+CONFIG_SECCOMP=y
+CONFIG_KEXEC=y
+CONFIG_XEN=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_COMPAT=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+CONFIG_ARM_IMX8_CPUFREQ=y
+CONFIG_ARM_IMX8MQ_CPUFREQ=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IPV6=m
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_LLC2=y
+CONFIG_BPF_JIT=y
+CONFIG_CAN=y
+CONFIG_CAN_FLEXCAN=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_LEDS=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIVHCI=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=320
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SLRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_SPI_FSL_QUADSPI=y
+CONFIG_SPI_FSL_FLEXSPI=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_XEN_BLKDEV_BACKEND=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_SENSORS_FXOS8700=y
+CONFIG_SENSORS_FXAS2100X=y
+CONFIG_SRAM=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_IMX=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_TUN=y
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_MACB=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
+CONFIG_SKY2=y
+CONFIG_RAVB=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=m
+CONFIG_AT803X_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_ATH10K=y
+CONFIG_ATH10K_PCI=y
+CONFIG_ATH10K_AHB=y
+CONFIG_ATH10K_DEBUGFS=y
+CONFIG_BCMDHD_1363=y
+CONFIG_BCMDHD_PCIE=y
+CONFIG_RTL_CARDS=m
+# CONFIG_WLAN_VENDOR_TI is not set
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX_SC_PWRKEY=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_HISI_POWERKEY=y
+CONFIG_INPUT_MPL3115=y
+CONFIG_INPUT_ISL29023=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_IMX=y
+CONFIG_I2C_IMX_LPI2C=y
+CONFIG_I2C_MESON=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_QUP=y
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER_F=y
+CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_LPSPI=y
+CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_QUP=y
+CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_INA2XX=m
+# CONFIG_MXC_MMA8451 is not set
+CONFIG_THERMAL_WRITABLE_TRIPS=y
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_IMX8M_THERMAL=y
+CONFIG_IMX_SC_THERMAL=y
+CONFIG_DEVICE_THERMAL=y
+CONFIG_EXYNOS_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_IMX8_WDT=y
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+CONFIG_RENESAS_WDT=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_MXC_CAPTURE=y
+CONFIG_VIDEO_MX8_CAPTURE=y
+CONFIG_GMSL_MAX9286=y
+CONFIG_VIDEO_MXC_CSI_CAMERA=y
+CONFIG_MXC_MIPI_CSI=y
+CONFIG_MXC_CAMERA_OV5640_MIPI_V2=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_IMX_DPU_CORE=y
+CONFIG_IMX_DCSS_CORE=y
+CONFIG_DRM=y
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_VIVANTE=m
+CONFIG_DRM_MSM=m
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_RAYDIUM_RM67191=y
+CONFIG_DRM_I2C_ADV7511=y
+CONFIG_DRM_ITE_IT6263=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_LDB=y
+CONFIG_DRM_IMX_HDMI=y
+CONFIG_DRM_IMX_NWL_DSI=y
+CONFIG_DRM_IMX_HDP=y
+CONFIG_IMX_HDP_CEC=y
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MXSFB=y
+CONFIG_FB_IMX64=y
+CONFIG_FB_IMX64_DEBUG=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_MXC_DISP_FRAMEWORK=y
+CONFIG_FB_MX8_HDMI=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_ACM=y
+CONFIG_SND_SOC_FSL_HIFI4=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_IMX_WM8960=y
+CONFIG_SND_SOC_IMX_WM8524=y
+CONFIG_SND_SOC_IMX_CS42888=y
+CONFIG_SND_SOC_IMX_WM8962=y
+CONFIG_SND_SOC_IMX_MQS=y
+CONFIG_SND_SOC_IMX_SPDIF=y
+CONFIG_SND_SOC_IMX_AMIX=y
+CONFIG_SND_SOC_IMX_CDNHDMI=y
+CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_AK4613=y
+CONFIG_HID_MULTITOUCH=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
+CONFIG_USB_ACM=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HOST_ROLE=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_USB_TEST=m
+CONFIG_USB_EHSET_TEST_FIXTURE=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_FSL_UTP=y
+CONFIG_USB_CONFIGFS_F_LB_SS=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_USB_CONFIGFS_F_UAC1=y
+CONFIG_USB_CONFIGFS_F_UAC2=y
+CONFIG_USB_CONFIGFS_F_MIDI=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_AUDIO=m
+CONFIG_GADGET_UAC1=y
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_G_NCM=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+# CONFIG_MMC_SDHCI_IPROC is not set
+CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
+CONFIG_MXC_MLB150=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_S5M=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_S3C=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_SNVS=y
+CONFIG_RTC_DRV_IMX_SC=y
+CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA_V3=y
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_MEDIA_CEC=y
+CONFIG_ION=y
+CONFIG_ION_MXC=y
+CONFIG_TYPEC_TCPM=y
+CONFIG_TYPEC_TCPCI=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_CLKSRC_IMX_SYS_CNT=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+CONFIG_HI6220_MBOX=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARCH_MXC_ARM64=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_EXTCON_PTN5150=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_TEGRA=m
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_IMX8_DDR_PERF=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_NVMEM_IMX_SCU_OCOTP=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ACPI=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_HUGETLBFS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_KVM=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_MEMTEST=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CHACHA20POLY1305=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_RMD128=y
+CONFIG_CRYPTO_RMD160=y
+CONFIG_CRYPTO_RMD256=y
+CONFIG_CRYPTO_RMD320=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA3=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_CRC32_ARM64=y
--git a/configs/freescale_imx8mqevk_defconfig b/configs/freescale_imx8mqevk_defconfig
new file mode 100644
index 0000000..bc12e7c
--- /dev/null
+++ b/configs/freescale_imx8mqevk_defconfig
@@ -0,0 +1,37 @@
+BR2_aarch64=y
+BR2_ARM_FPU_VFPV3=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/imx8mqevk/linux-4.9.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk"
+BR2_PACKAGE_FREESCALE_IMX=y
+BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y
+BR2_PACKAGE_FIRMWARE_IMX=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2017.03_4.9.51_imx8m_beta"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk"
+BR2_TARGET_UBOOT_FORMAT_IMX=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_IMX_MKIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
--
2.7.4
^ permalink raw reply related [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-22 10:02 ` [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board Erik Larsson
@ 2018-02-23 10:43 ` Gary Bisson
2018-02-27 4:15 ` Erik Larsson
2018-02-25 7:43 ` Baruch Siach
2018-02-25 21:20 ` Thomas Petazzoni
2 siblings, 1 reply; 16+ messages in thread
From: Gary Bisson @ 2018-02-23 10:43 UTC (permalink / raw)
To: buildroot
Hi Erik,
On Thu, Feb 22, 2018 at 11:02:58AM +0100, Erik Larsson wrote:
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
> ---
> .../common/imx/genimage.cfg.template_imx8 | 40 ++
> board/freescale/common/imx/post-image.sh | 10 +-
> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
> configs/freescale_imx8mqevk_defconfig | 37 ++
Why do we copy the defconfig in board folder although it present in the
kernel tree directly?
Regards,
Gary
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-23 10:43 ` Gary Bisson
@ 2018-02-27 4:15 ` Erik Larsson
2018-02-27 8:36 ` Arnout Vandecappelle
0 siblings, 1 reply; 16+ messages in thread
From: Erik Larsson @ 2018-02-27 4:15 UTC (permalink / raw)
To: buildroot
Hi Gary,
2018-02-23 11:43 GMT+01:00 Gary Bisson <gary.bisson@boundarydevices.com>:
> Hi Erik,
>
> On Thu, Feb 22, 2018 at 11:02:58AM +0100, Erik Larsson wrote:
>> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
>> ---
>> .../common/imx/genimage.cfg.template_imx8 | 40 ++
>> board/freescale/common/imx/post-image.sh | 10 +-
>> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
>> configs/freescale_imx8mqevk_defconfig | 37 ++
>
> Why do we copy the defconfig in board folder although it present in the
> kernel tree directly?
The reason I add the kernel defconfig into the board folder is that
NXP removed all defconfigs and renamed the valid one to 'defconfig' in
the kernel. This makes it impossible (at least I think so) to use an
in tree defconfig.
$ ls -l arch/arm64/configs/
total 16
-rw-r--r-- 1 erik erik 14337 dec 15 02:52 defconfig
Copying it into the board folder was the best solution available.
>
> Regards,
> Gary
Regards,
Erik
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-27 4:15 ` Erik Larsson
@ 2018-02-27 8:36 ` Arnout Vandecappelle
0 siblings, 0 replies; 16+ messages in thread
From: Arnout Vandecappelle @ 2018-02-27 8:36 UTC (permalink / raw)
To: buildroot
On 27-02-18 05:15, Erik Larsson wrote:
> Hi Gary,
>
> 2018-02-23 11:43 GMT+01:00 Gary Bisson <gary.bisson@boundarydevices.com>:
>> Hi Erik,
>>
>> On Thu, Feb 22, 2018 at 11:02:58AM +0100, Erik Larsson wrote:
>>> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
>>> ---
>>> .../common/imx/genimage.cfg.template_imx8 | 40 ++
>>> board/freescale/common/imx/post-image.sh | 10 +-
>>> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
>>> configs/freescale_imx8mqevk_defconfig | 37 ++
>>
>> Why do we copy the defconfig in board folder although it present in the
>> kernel tree directly?
> The reason I add the kernel defconfig into the board folder is that
> NXP removed all defconfigs and renamed the valid one to 'defconfig' in
> the kernel. This makes it impossible (at least I think so) to use an
> in tree defconfig.
>
> $ ls -l arch/arm64/configs/
> total 16
> -rw-r--r-- 1 erik erik 14337 dec 15 02:52 defconfig
>
> Copying it into the board folder was the best solution available.
You should be able to use that in-tree defconfig with
BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-22 10:02 ` [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board Erik Larsson
2018-02-23 10:43 ` Gary Bisson
@ 2018-02-25 7:43 ` Baruch Siach
2018-02-25 21:20 ` Thomas Petazzoni
2 siblings, 0 replies; 16+ messages in thread
From: Baruch Siach @ 2018-02-25 7:43 UTC (permalink / raw)
To: buildroot
Hi Erik,
On Thu, Feb 22, 2018 at 11:02:58AM +0100, Erik Larsson wrote:
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
> ---
> .../common/imx/genimage.cfg.template_imx8 | 40 ++
> board/freescale/common/imx/post-image.sh | 10 +-
> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
> configs/freescale_imx8mqevk_defconfig | 37 ++
> 4 files changed, 709 insertions(+), 3 deletions(-)
> create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8
> create mode 100644 board/freescale/imx8mqevk/linux-4.9.config
> create mode 100644 configs/freescale_imx8mqevk_defconfig
[snip]
> diff --git a/configs/freescale_imx8mqevk_defconfig b/configs/freescale_imx8mqevk_defconfig
> new file mode 100644
> index 0000000..bc12e7c
> --- /dev/null
> +++ b/configs/freescale_imx8mqevk_defconfig
> @@ -0,0 +1,37 @@
> +BR2_aarch64=y
> +BR2_ARM_FPU_VFPV3=y
> +BR2_TOOLCHAIN_EXTERNAL=y
> +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta"
For the sake of reproducibility we don't use branch names in defconfigs, since
these might change over time. Use the 'rel_imx_4.9.51_8mq_beta' tag name
instead. If you believe that commits that follow that tag are essential, you
can use the raw commit id of current imx_4.9.51_imx8m_beta branch tip.
> +BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
> +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/imx8mqevk/linux-4.9.config"
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-imx8mq-evk"
> +BR2_PACKAGE_FREESCALE_IMX=y
> +BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y
> +BR2_PACKAGE_FIRMWARE_IMX=y
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/imx-atf"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="imx_4.9.51_imx8m_beta"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="imx8mq"
> +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/uboot-imx"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="imx_v2017.03_4.9.51_imx8m_beta"
This is also a branch. You can use the 'o8.0.0_1.3.0_8m-prc' tag, which is
currently almost the same, or a commit id.
> +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx8mq_evk"
> +BR2_TARGET_UBOOT_FORMAT_IMX=y
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_IMX_MKIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board
2018-02-22 10:02 ` [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board Erik Larsson
2018-02-23 10:43 ` Gary Bisson
2018-02-25 7:43 ` Baruch Siach
@ 2018-02-25 21:20 ` Thomas Petazzoni
2 siblings, 0 replies; 16+ messages in thread
From: Thomas Petazzoni @ 2018-02-25 21:20 UTC (permalink / raw)
To: buildroot
Hello,
On Thu, 22 Feb 2018 11:02:58 +0100, Erik Larsson wrote:
> Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Minor nit: the commit title should be something like:
configs/freescale_imx8mqevk: new defconfig
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk)
2018-02-22 10:02 [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson
` (2 preceding siblings ...)
2018-02-22 10:02 ` [Buildroot] [PATCH v2 3/3] add support iMX8MQ-evk board Erik Larsson
@ 2018-02-22 14:30 ` Marcus Folkesson
2018-02-25 21:19 ` Thomas Petazzoni
4 siblings, 0 replies; 16+ messages in thread
From: Marcus Folkesson @ 2018-02-22 14:30 UTC (permalink / raw)
To: buildroot
Erik,
On Thu, Feb 22, 2018 at 11:02:55AM +0100, Erik Larsson wrote:
> This series provides initial support for NXP iMX8 (imx8mq-evk).
>
> This series of patches are tested against NXP imx8mq-evk.
> It only handles basic support for iIMX8M, currently no
> support for GPU, VPU and other HW features. This series
> makes it possible to build a minimal system for imx8mq-evk.
>
> Changes since v1
> ================
> - Removed new imx-atf package, use boot/arm-trusted-firmware.
> - Move imx-mkimage from package/freescale-imx to package.
> - Add upstream URL for imx-mkimage in Config.in.host.
> - Fix install command syntax for imx-mkimage package.
> - Use Makefile in imx-mkimage to build imx-boot-imx8mqevk-sd.bin instead of doing that in the post-script.sh
> - Split third commit into two, one for firmware-img package and one for iMX8 board.
Please keep the version history in the patches below the `---` marker [1].
It is easier to follow how each patch has evolved.
Also, when you submit a new version of a patchset, please mark the old one as
superseeded in patchwork [1].
>
> Erik Larsson (3):
> imx-mkimage: new package
> firmware-imx: add support for iMX8M firmware
> add support iMX8MQ-evk board
>
> .../common/imx/genimage.cfg.template_imx8 | 40 ++
> board/freescale/common/imx/post-image.sh | 10 +-
> board/freescale/imx8mqevk/linux-4.9.config | 625 +++++++++++++++++++++
> configs/freescale_imx8mqevk_defconfig | 37 ++
> package/Config.in.host | 1 +
> package/freescale-imx/Config.in | 4 +-
> package/freescale-imx/firmware-imx/Config.in | 2 +-
> package/freescale-imx/firmware-imx/firmware-imx.mk | 8 +
> .../imx-mkimage/0001-remove-git-build-info.patch | 28 +
> package/imx-mkimage/Config.in.host | 11 +
> package/imx-mkimage/imx-mkimage.hash | 3 +
> package/imx-mkimage/imx-mkimage.mk | 41 ++
> 12 files changed, 805 insertions(+), 5 deletions(-)
> create mode 100644 board/freescale/common/imx/genimage.cfg.template_imx8
> create mode 100644 board/freescale/imx8mqevk/linux-4.9.config
> create mode 100644 configs/freescale_imx8mqevk_defconfig
> create mode 100644 package/imx-mkimage/0001-remove-git-build-info.patch
> create mode 100644 package/imx-mkimage/Config.in.host
> create mode 100644 package/imx-mkimage/imx-mkimage.hash
> create mode 100644 package/imx-mkimage/imx-mkimage.mk
>
> --
> 2.7.4
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
[1] https://github.com/buildroot/buildroot/blob/master/docs/manual/contribute.txt
Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180222/b6b7a3c2/attachment.asc>
^ permalink raw reply [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk)
2018-02-22 10:02 [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Erik Larsson
` (3 preceding siblings ...)
2018-02-22 14:30 ` [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk) Marcus Folkesson
@ 2018-02-25 21:19 ` Thomas Petazzoni
2018-02-26 5:32 ` Erik Larsson
4 siblings, 1 reply; 16+ messages in thread
From: Thomas Petazzoni @ 2018-02-25 21:19 UTC (permalink / raw)
To: buildroot
Hello Erik,
On Thu, 22 Feb 2018 11:02:55 +0100, Erik Larsson wrote:
> Erik Larsson (3):
> imx-mkimage: new package
> firmware-imx: add support for iMX8M firmware
> add support iMX8MQ-evk board
Thanks for this new iteration. Seeing the number of comments you have
received, I'll mark the patches as "Changes Requested" in our patch
tracking system. Could you resubmit a new version that takes into
account the comments ?
Thanks!
Thomas
--
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 16+ messages in thread* [Buildroot] [PATCH v2 0/3] Initial support for NXP iMX8 (imx8mq-evk)
2018-02-25 21:19 ` Thomas Petazzoni
@ 2018-02-26 5:32 ` Erik Larsson
0 siblings, 0 replies; 16+ messages in thread
From: Erik Larsson @ 2018-02-26 5:32 UTC (permalink / raw)
To: buildroot
Of course!
I just need to sort everything out and test it again!
And thanks you all for your reviews! As a knewbie contributer I really
appreciate all the feedback.
2018-02-25 22:19 GMT+01:00 Thomas Petazzoni <thomas.petazzoni@bootlin.com>:
> Hello Erik,
>
> On Thu, 22 Feb 2018 11:02:55 +0100, Erik Larsson wrote:
>
>> Erik Larsson (3):
>> imx-mkimage: new package
>> firmware-imx: add support for iMX8M firmware
>> add support iMX8MQ-evk board
>
> Thanks for this new iteration. Seeing the number of comments you have
> received, I'll mark the patches as "Changes Requested" in our patch
> tracking system. Could you resubmit a new version that takes into
> account the comments ?
>
> Thanks!
>
> Thomas
> --
> Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> http://bootlin.com
^ permalink raw reply [flat|nested] 16+ messages in thread