* [Qemu-devel] [PULL 1/9] char: don't silently skip tn3270 protocol init when TLS is enabled
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
@ 2018-03-12 20:12 ` Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types Daniel P. Berrangé
` (9 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:12 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
Even if common tn3270 implementations do not support TLS, it is trivial to
have them proxied over a proxy like stunnel which adds TLS at the sockets
layer. We should thus not silently skip tn3270 protocol initialization
when TLS is enabled.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
chardev/char-socket.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/chardev/char-socket.c b/chardev/char-socket.c
index a220803c01..1a371b91ac 100644
--- a/chardev/char-socket.c
+++ b/chardev/char-socket.c
@@ -663,8 +663,7 @@ static void tcp_chr_tls_handshake(QIOTask *task,
if (qio_task_propagate_error(task, NULL)) {
tcp_chr_disconnect(chr);
} else {
- /* tn3270 does not support TLS yet */
- if (s->do_telnetopt && !s->is_tn3270) {
+ if (s->do_telnetopt) {
tcp_chr_telnet_init(chr);
} else {
tcp_chr_connect(chr);
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 1/9] char: don't silently skip tn3270 protocol init when TLS is enabled Daniel P. Berrangé
@ 2018-03-12 20:12 ` Daniel P. Berrangé
2018-03-13 18:11 ` Daniel P. Berrangé
2018-03-13 19:10 ` Kamil Rytarowski
2018-03-12 20:12 ` [Qemu-devel] [PULL 3/9] sockets: pull code for testing IP availability out of specific test Daniel P. Berrangé
` (8 subsequent siblings)
10 siblings, 2 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:12 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
There are qemu_strtoNN functions for various sized integers. This adds two
more for plain int & unsigned int types, with suitable range checking.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
include/qemu/cutils.h | 4 +
tests/test-cutils.c | 657 ++++++++++++++++++++++++++++++++++++++++++++++++++
util/cutils.c | 108 +++++++++
3 files changed, 769 insertions(+)
diff --git a/include/qemu/cutils.h b/include/qemu/cutils.h
index f0878eaafa..a663340b23 100644
--- a/include/qemu/cutils.h
+++ b/include/qemu/cutils.h
@@ -126,6 +126,10 @@ time_t mktimegm(struct tm *tm);
int qemu_fdatasync(int fd);
int fcntl_setfl(int fd, int flag);
int qemu_parse_fd(const char *param);
+int qemu_strtoi(const char *nptr, const char **endptr, int base,
+ int *result);
+int qemu_strtoui(const char *nptr, const char **endptr, int base,
+ unsigned int *result);
int qemu_strtol(const char *nptr, const char **endptr, int base,
long *result);
int qemu_strtoul(const char *nptr, const char **endptr, int base,
diff --git a/tests/test-cutils.c b/tests/test-cutils.c
index f64a49b7fb..64a489c2e9 100644
--- a/tests/test-cutils.c
+++ b/tests/test-cutils.c
@@ -223,6 +223,583 @@ static void test_parse_uint_full_correct(void)
g_assert_cmpint(i, ==, 123);
}
+static void test_qemu_strtoi_correct(void)
+{
+ const char *str = "12345 foo";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 12345);
+ g_assert(endptr == str + 5);
+}
+
+static void test_qemu_strtoi_null(void)
+{
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(NULL, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == NULL);
+}
+
+static void test_qemu_strtoi_empty(void)
+{
+ const char *str = "";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoi_whitespace(void)
+{
+ const char *str = " \t ";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoi_invalid(void)
+{
+ const char *str = " xxxx \t abc";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoi_trailing(void)
+{
+ const char *str = "123xxx";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 123);
+ g_assert(endptr == str + 3);
+}
+
+static void test_qemu_strtoi_octal(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 8, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 0123);
+ g_assert(endptr == str + strlen(str));
+
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 0123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoi_decimal(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 10, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 123);
+ g_assert(endptr == str + strlen(str));
+
+ str = "123";
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoi_hex(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 16, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 0x123);
+ g_assert(endptr == str + strlen(str));
+
+ str = "0x123";
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 0x123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoi_max(void)
+{
+ char *str = g_strdup_printf("%d", INT_MAX);
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, INT_MAX);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoi_overflow(void)
+{
+ char *str = g_strdup_printf("%lld", (long long)INT_MAX + 1ll);
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -ERANGE);
+ g_assert_cmpint(res, ==, INT_MAX);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoi_underflow(void)
+{
+ char *str = g_strdup_printf("%lld", (long long)INT_MIN - 1ll);
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -ERANGE);
+ g_assert_cmpint(res, ==, INT_MIN);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoi_negative(void)
+{
+ const char *str = " \t -321";
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, -321);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoi_full_correct(void)
+{
+ const char *str = "123";
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, 123);
+}
+
+static void test_qemu_strtoi_full_null(void)
+{
+ char f = 'X';
+ const char *endptr = &f;
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(NULL, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == NULL);
+}
+
+static void test_qemu_strtoi_full_empty(void)
+{
+ const char *str = "";
+ int res = 999L;
+ int err;
+
+ err = qemu_strtoi(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+}
+
+static void test_qemu_strtoi_full_negative(void)
+{
+ const char *str = " \t -321";
+ int res = 999;
+ int err;
+
+ err = qemu_strtoi(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, -321);
+}
+
+static void test_qemu_strtoi_full_trailing(void)
+{
+ const char *str = "123xxx";
+ int res;
+ int err;
+
+ err = qemu_strtoi(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+}
+
+static void test_qemu_strtoi_full_max(void)
+{
+ char *str = g_strdup_printf("%d", INT_MAX);
+ int res;
+ int err;
+
+ err = qemu_strtoi(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpint(res, ==, INT_MAX);
+ g_free(str);
+}
+
+static void test_qemu_strtoui_correct(void)
+{
+ const char *str = "12345 foo";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 12345);
+ g_assert(endptr == str + 5);
+}
+
+static void test_qemu_strtoui_null(void)
+{
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(NULL, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == NULL);
+}
+
+static void test_qemu_strtoui_empty(void)
+{
+ const char *str = "";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoui_whitespace(void)
+{
+ const char *str = " \t ";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoui_invalid(void)
+{
+ const char *str = " xxxx \t abc";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+ g_assert(endptr == str);
+}
+
+static void test_qemu_strtoui_trailing(void)
+{
+ const char *str = "123xxx";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 123);
+ g_assert(endptr == str + 3);
+}
+
+static void test_qemu_strtoui_octal(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 8, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 0123);
+ g_assert(endptr == str + strlen(str));
+
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 0123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoui_decimal(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 10, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 123);
+ g_assert(endptr == str + strlen(str));
+
+ str = "123";
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoui_hex(void)
+{
+ const char *str = "0123";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 16, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmphex(res, ==, 0x123);
+ g_assert(endptr == str + strlen(str));
+
+ str = "0x123";
+ res = 999;
+ endptr = &f;
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmphex(res, ==, 0x123);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoui_max(void)
+{
+ char *str = g_strdup_printf("%u", UINT_MAX);
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmphex(res, ==, UINT_MAX);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoui_overflow(void)
+{
+ char *str = g_strdup_printf("%lld", (long long)UINT_MAX + 1ll);
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -ERANGE);
+ g_assert_cmphex(res, ==, UINT_MAX);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoui_underflow(void)
+{
+ char *str = g_strdup_printf("%lld", (long long)INT_MIN - 1ll);
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, -ERANGE);
+ g_assert_cmpuint(res, ==, (unsigned int)-1);
+ g_assert(endptr == str + strlen(str));
+ g_free(str);
+}
+
+static void test_qemu_strtoui_negative(void)
+{
+ const char *str = " \t -321";
+ char f = 'X';
+ const char *endptr = &f;
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, &endptr, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, (unsigned int)-321);
+ g_assert(endptr == str + strlen(str));
+}
+
+static void test_qemu_strtoui_full_correct(void)
+{
+ const char *str = "123";
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, 123);
+}
+
+static void test_qemu_strtoui_full_null(void)
+{
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(NULL, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+}
+
+static void test_qemu_strtoui_full_empty(void)
+{
+ const char *str = "";
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+}
+static void test_qemu_strtoui_full_negative(void)
+{
+ const char *str = " \t -321";
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, NULL, 0, &res);
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmpuint(res, ==, (unsigned int)-321);
+}
+
+static void test_qemu_strtoui_full_trailing(void)
+{
+ const char *str = "123xxx";
+ unsigned int res;
+ int err;
+
+ err = qemu_strtoui(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, -EINVAL);
+}
+
+static void test_qemu_strtoui_full_max(void)
+{
+ char *str = g_strdup_printf("%u", UINT_MAX);
+ unsigned int res = 999;
+ int err;
+
+ err = qemu_strtoui(str, NULL, 0, &res);
+
+ g_assert_cmpint(err, ==, 0);
+ g_assert_cmphex(res, ==, UINT_MAX);
+ g_free(str);
+}
+
static void test_qemu_strtol_correct(void)
{
const char *str = "12345 foo";
@@ -1612,6 +2189,86 @@ int main(int argc, char **argv)
g_test_add_func("/cutils/parse_uint_full/correct",
test_parse_uint_full_correct);
+ /* qemu_strtoi() tests */
+ g_test_add_func("/cutils/qemu_strtoi/correct",
+ test_qemu_strtoi_correct);
+ g_test_add_func("/cutils/qemu_strtoi/null",
+ test_qemu_strtoi_null);
+ g_test_add_func("/cutils/qemu_strtoi/empty",
+ test_qemu_strtoi_empty);
+ g_test_add_func("/cutils/qemu_strtoi/whitespace",
+ test_qemu_strtoi_whitespace);
+ g_test_add_func("/cutils/qemu_strtoi/invalid",
+ test_qemu_strtoi_invalid);
+ g_test_add_func("/cutils/qemu_strtoi/trailing",
+ test_qemu_strtoi_trailing);
+ g_test_add_func("/cutils/qemu_strtoi/octal",
+ test_qemu_strtoi_octal);
+ g_test_add_func("/cutils/qemu_strtoi/decimal",
+ test_qemu_strtoi_decimal);
+ g_test_add_func("/cutils/qemu_strtoi/hex",
+ test_qemu_strtoi_hex);
+ g_test_add_func("/cutils/qemu_strtoi/max",
+ test_qemu_strtoi_max);
+ g_test_add_func("/cutils/qemu_strtoi/overflow",
+ test_qemu_strtoi_overflow);
+ g_test_add_func("/cutils/qemu_strtoi/underflow",
+ test_qemu_strtoi_underflow);
+ g_test_add_func("/cutils/qemu_strtoi/negative",
+ test_qemu_strtoi_negative);
+ g_test_add_func("/cutils/qemu_strtoi_full/correct",
+ test_qemu_strtoi_full_correct);
+ g_test_add_func("/cutils/qemu_strtoi_full/null",
+ test_qemu_strtoi_full_null);
+ g_test_add_func("/cutils/qemu_strtoi_full/empty",
+ test_qemu_strtoi_full_empty);
+ g_test_add_func("/cutils/qemu_strtoi_full/negative",
+ test_qemu_strtoi_full_negative);
+ g_test_add_func("/cutils/qemu_strtoi_full/trailing",
+ test_qemu_strtoi_full_trailing);
+ g_test_add_func("/cutils/qemu_strtoi_full/max",
+ test_qemu_strtoi_full_max);
+
+ /* qemu_strtoui() tests */
+ g_test_add_func("/cutils/qemu_strtoui/correct",
+ test_qemu_strtoui_correct);
+ g_test_add_func("/cutils/qemu_strtoui/null",
+ test_qemu_strtoui_null);
+ g_test_add_func("/cutils/qemu_strtoui/empty",
+ test_qemu_strtoui_empty);
+ g_test_add_func("/cutils/qemu_strtoui/whitespace",
+ test_qemu_strtoui_whitespace);
+ g_test_add_func("/cutils/qemu_strtoui/invalid",
+ test_qemu_strtoui_invalid);
+ g_test_add_func("/cutils/qemu_strtoui/trailing",
+ test_qemu_strtoui_trailing);
+ g_test_add_func("/cutils/qemu_strtoui/octal",
+ test_qemu_strtoui_octal);
+ g_test_add_func("/cutils/qemu_strtoui/decimal",
+ test_qemu_strtoui_decimal);
+ g_test_add_func("/cutils/qemu_strtoui/hex",
+ test_qemu_strtoui_hex);
+ g_test_add_func("/cutils/qemu_strtoui/max",
+ test_qemu_strtoui_max);
+ g_test_add_func("/cutils/qemu_strtoui/overflow",
+ test_qemu_strtoui_overflow);
+ g_test_add_func("/cutils/qemu_strtoui/underflow",
+ test_qemu_strtoui_underflow);
+ g_test_add_func("/cutils/qemu_strtoui/negative",
+ test_qemu_strtoui_negative);
+ g_test_add_func("/cutils/qemu_strtoui_full/correct",
+ test_qemu_strtoui_full_correct);
+ g_test_add_func("/cutils/qemu_strtoui_full/null",
+ test_qemu_strtoui_full_null);
+ g_test_add_func("/cutils/qemu_strtoui_full/empty",
+ test_qemu_strtoui_full_empty);
+ g_test_add_func("/cutils/qemu_strtoui_full/negative",
+ test_qemu_strtoui_full_negative);
+ g_test_add_func("/cutils/qemu_strtoui_full/trailing",
+ test_qemu_strtoui_full_trailing);
+ g_test_add_func("/cutils/qemu_strtoui_full/max",
+ test_qemu_strtoui_full_max);
+
/* qemu_strtol() tests */
g_test_add_func("/cutils/qemu_strtol/correct",
test_qemu_strtol_correct);
diff --git a/util/cutils.c b/util/cutils.c
index b33ede83d1..774d5f7362 100644
--- a/util/cutils.c
+++ b/util/cutils.c
@@ -297,6 +297,114 @@ static int check_strtox_error(const char *nptr, char *ep,
return -libc_errno;
}
+/**
+ * Convert string @nptr to an integer, and store it in @result.
+ *
+ * This is a wrapper around strtol() that is harder to misuse.
+ * Semantics of @nptr, @endptr, @base match strtol() with differences
+ * noted below.
+ *
+ * @nptr may be null, and no conversion is performed then.
+ *
+ * If no conversion is performed, store @nptr in *@endptr and return
+ * -EINVAL.
+ *
+ * If @endptr is null, and the string isn't fully converted, return
+ * -EINVAL. This is the case when the pointer that would be stored in
+ * a non-null @endptr points to a character other than '\0'.
+ *
+ * If the conversion overflows @result, store INT_MAX in @result,
+ * and return -ERANGE.
+ *
+ * If the conversion underflows @result, store INT_MIN in @result,
+ * and return -ERANGE.
+ *
+ * Else store the converted value in @result, and return zero.
+ */
+int qemu_strtoi(const char *nptr, const char **endptr, int base,
+ int *result)
+{
+ char *ep;
+ long lresult;
+
+ if (!nptr) {
+ if (endptr) {
+ *endptr = nptr;
+ }
+ return -EINVAL;
+ }
+
+ errno = 0;
+ lresult = strtol(nptr, &ep, base);
+ if (lresult < INT_MIN) {
+ *result = INT_MIN;
+ errno = ERANGE;
+ } else if (lresult > INT_MAX) {
+ *result = INT_MAX;
+ errno = ERANGE;
+ } else {
+ *result = lresult;
+ }
+ return check_strtox_error(nptr, ep, endptr, errno);
+}
+
+/**
+ * Convert string @nptr to an unsigned integer, and store it in @result.
+ *
+ * This is a wrapper around strtoul() that is harder to misuse.
+ * Semantics of @nptr, @endptr, @base match strtoul() with differences
+ * noted below.
+ *
+ * @nptr may be null, and no conversion is performed then.
+ *
+ * If no conversion is performed, store @nptr in *@endptr and return
+ * -EINVAL.
+ *
+ * If @endptr is null, and the string isn't fully converted, return
+ * -EINVAL. This is the case when the pointer that would be stored in
+ * a non-null @endptr points to a character other than '\0'.
+ *
+ * If the conversion overflows @result, store UINT_MAX in @result,
+ * and return -ERANGE.
+ *
+ * Else store the converted value in @result, and return zero.
+ *
+ * Note that a number with a leading minus sign gets converted without
+ * the minus sign, checked for overflow (see above), then negated (in
+ * @result's type). This is exactly how strtoul() works.
+ */
+int qemu_strtoui(const char *nptr, const char **endptr, int base,
+ unsigned int *result)
+{
+ char *ep;
+ long lresult;
+
+ if (!nptr) {
+ if (endptr) {
+ *endptr = nptr;
+ }
+ return -EINVAL;
+ }
+
+ errno = 0;
+ lresult = strtoul(nptr, &ep, base);
+ /* Windows returns 1 for negative out-of-range values. */
+ if (errno == ERANGE) {
+ *result = -1;
+ } else {
+ if (lresult > UINT_MAX) {
+ *result = UINT_MAX;
+ errno = ERANGE;
+ } else if (lresult < INT_MIN) {
+ *result = UINT_MAX;
+ errno = ERANGE;
+ } else {
+ *result = lresult;
+ }
+ }
+ return check_strtox_error(nptr, ep, endptr, errno);
+}
+
/**
* Convert string @nptr to a long integer, and store it in @result.
*
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
2018-03-12 20:12 ` [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types Daniel P. Berrangé
@ 2018-03-13 18:11 ` Daniel P. Berrangé
2018-03-13 19:10 ` Kamil Rytarowski
1 sibling, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-13 18:11 UTC (permalink / raw)
To: qemu-devel
Cc: Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
On Mon, Mar 12, 2018 at 08:12:58PM +0000, Daniel P. Berrangé wrote:
> From: "Daniel P. Berrange" <berrange@redhat.com>
>
> There are qemu_strtoNN functions for various sized integers. This adds two
> more for plain int & unsigned int types, with suitable range checking.
>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
> diff --git a/util/cutils.c b/util/cutils.c
> index b33ede83d1..774d5f7362 100644
> --- a/util/cutils.c
> +++ b/util/cutils.c
> +int qemu_strtoui(const char *nptr, const char **endptr, int base,
> + unsigned int *result)
> +{
> + char *ep;
> + long lresult;
> +
> + if (!nptr) {
> + if (endptr) {
> + *endptr = nptr;
> + }
> + return -EINVAL;
> + }
> +
> + errno = 0;
> + lresult = strtoul(nptr, &ep, base);
The test failure on 32-bit is caused by use of strtoul instead
of strtoull here, so I'll just switch them, so the logic that
follows below actually works on 32-bit.
> + /* Windows returns 1 for negative out-of-range values. */
> + if (errno == ERANGE) {
> + *result = -1;
> + } else {
> + if (lresult > UINT_MAX) {
> + *result = UINT_MAX;
> + errno = ERANGE;
> + } else if (lresult < INT_MIN) {
> + *result = UINT_MAX;
> + errno = ERANGE;
> + } else {
> + *result = lresult;
> + }
> + }
> + return check_strtox_error(nptr, ep, endptr, errno);
> +}
> +
> /**
> * Convert string @nptr to a long integer, and store it in @result.
> *
> --
> 2.14.3
>
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
2018-03-12 20:12 ` [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types Daniel P. Berrangé
2018-03-13 18:11 ` Daniel P. Berrangé
@ 2018-03-13 19:10 ` Kamil Rytarowski
1 sibling, 0 replies; 17+ messages in thread
From: Kamil Rytarowski @ 2018-03-13 19:10 UTC (permalink / raw)
To: Daniel P. Berrangé, qemu-devel
Cc: Peter Maydell, Markus Armbruster, Gerd Hoffmann,
Marc-André Lureau, Paolo Bonzini
[-- Attachment #1: Type: text/plain, Size: 1061 bytes --]
On 12.03.2018 21:12, Daniel P. Berrangé wrote:
> From: "Daniel P. Berrange" <berrange@redhat.com>
>
> There are qemu_strtoNN functions for various sized integers. This adds two
> more for plain int & unsigned int types, with suitable range checking.
>
There is a prior art in NetBSD with strtoi(3) and strtou(3).
http://netbsd.gw.com/cgi-bin/man-cgi?strtoi++NetBSD-current
http://netbsd.gw.com/cgi-bin/man-cgi?strtou++NetBSD-current
This is a clean room alternative for strtonum(3) with compat with some
other OSes.
The original code is in:
https://github.com/NetBSD/src/blob/trunk/common/lib/libc/stdlib/
It uses a wrapper for regular strtol(3)-like functions and strtol_l(3).
A simpler strtoi(3) wrapper is used in dhcpcd:
https://github.com/NetBSD/src/blob/trunk/external/bsd/dhcpcd/dist/compat/
It has one difference compared to new POSIX (release 2016 or so) - no
conversion at all is ECANCELED, not EINVAL. I think ECANCELED makes more
sense and is distinguishable with input base error, and should be preserved.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 850 bytes --]
^ permalink raw reply [flat|nested] 17+ messages in thread
* [Qemu-devel] [PULL 3/9] sockets: pull code for testing IP availability out of specific test
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 1/9] char: don't silently skip tn3270 protocol init when TLS is enabled Daniel P. Berrangé
2018-03-12 20:12 ` [Qemu-devel] [PULL 2/9] cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types Daniel P. Berrangé
@ 2018-03-12 20:12 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 4/9] sockets: strengthen test suite IP protocol availability checks Daniel P. Berrangé
` (7 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:12 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
The test-io-channel-socket.c file has some useful helper functions for
checking if a specific IP protocol is available. Other tests need to
perform similar kinds of checks to avoid running tests that will fail
due to missing IP protocols.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
tests/Makefile.include | 2 +-
tests/socket-helpers.c | 100 +++++++++++++++++++++++++++++++++++++++++
tests/socket-helpers.h | 42 +++++++++++++++++
tests/test-io-channel-socket.c | 72 +----------------------------
4 files changed, 145 insertions(+), 71 deletions(-)
create mode 100644 tests/socket-helpers.c
create mode 100644 tests/socket-helpers.h
diff --git a/tests/Makefile.include b/tests/Makefile.include
index ef9b88c369..3d5b6174a8 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -715,7 +715,7 @@ tests/test-crypto-tlssession$(EXESUF): tests/test-crypto-tlssession.o \
tests/crypto-tls-x509-helpers.o tests/pkix_asn1_tab.o $(test-crypto-obj-y)
tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
- tests/io-channel-helpers.o $(test-io-obj-y)
+ tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
tests/tpm-crb-test$(EXESUF): tests/tpm-crb-test.o tests/tpm-emu.o $(test-io-obj-y)
tests/tpm-tis-test$(EXESUF): tests/tpm-tis-test.o tests/tpm-emu.o $(test-io-obj-y)
tests/test-io-channel-file$(EXESUF): tests/test-io-channel-file.o \
diff --git a/tests/socket-helpers.c b/tests/socket-helpers.c
new file mode 100644
index 0000000000..6f4bf07aa9
--- /dev/null
+++ b/tests/socket-helpers.c
@@ -0,0 +1,100 @@
+/*
+ * Helper functions for tests using sockets
+ *
+ * Copyright 2015-2018 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/sockets.h"
+#include "socket-helpers.h"
+
+#ifndef AI_ADDRCONFIG
+# define AI_ADDRCONFIG 0
+#endif
+#ifndef EAI_ADDRFAMILY
+# define EAI_ADDRFAMILY 0
+#endif
+
+int socket_can_bind(const char *hostname)
+{
+ int fd = -1;
+ struct addrinfo ai, *res = NULL;
+ int rc;
+ int ret = -1;
+
+ memset(&ai, 0, sizeof(ai));
+ ai.ai_flags = AI_CANONNAME | AI_ADDRCONFIG;
+ ai.ai_family = AF_UNSPEC;
+ ai.ai_socktype = SOCK_STREAM;
+
+ /* lookup */
+ rc = getaddrinfo(hostname, NULL, &ai, &res);
+ if (rc != 0) {
+ if (rc == EAI_ADDRFAMILY ||
+ rc == EAI_FAMILY) {
+ errno = EADDRNOTAVAIL;
+ } else {
+ errno = EINVAL;
+ }
+ goto cleanup;
+ }
+
+ fd = qemu_socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (fd < 0) {
+ goto cleanup;
+ }
+
+ if (bind(fd, res->ai_addr, res->ai_addrlen) < 0) {
+ goto cleanup;
+ }
+
+ ret = 0;
+
+ cleanup:
+ if (fd != -1) {
+ close(fd);
+ }
+ if (res) {
+ freeaddrinfo(res);
+ }
+ return ret;
+}
+
+
+int socket_check_protocol_support(bool *has_ipv4, bool *has_ipv6)
+{
+ *has_ipv4 = *has_ipv6 = false;
+
+ if (socket_can_bind("127.0.0.1") < 0) {
+ if (errno != EADDRNOTAVAIL) {
+ return -1;
+ }
+ } else {
+ *has_ipv4 = true;
+ }
+
+ if (socket_can_bind("::1") < 0) {
+ if (errno != EADDRNOTAVAIL) {
+ return -1;
+ }
+ } else {
+ *has_ipv6 = true;
+ }
+
+ return 0;
+}
diff --git a/tests/socket-helpers.h b/tests/socket-helpers.h
new file mode 100644
index 0000000000..efa96eddc2
--- /dev/null
+++ b/tests/socket-helpers.h
@@ -0,0 +1,42 @@
+/*
+ * Helper functions for tests using sockets
+ *
+ * Copyright 2015-2018 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 or
+ * (at your option) version 3 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/*
+ * @hostname: a DNS name or numeric IP address
+ *
+ * Check whether it is possible to bind to ports
+ * on the DNS name or IP address @hostname. If an IP address
+ * is used, it must not be a wildcard address.
+ *
+ * Returns 0 on success, -1 on error with errno set
+ */
+int socket_can_bind(const char *hostname);
+
+/*
+ * @has_ipv4: set to true on return if IPv4 is available
+ * @has_ipv6: set to true on return if IPv6 is available
+ *
+ * Check whether IPv4 and/or IPv6 are available for use.
+ * On success, @has_ipv4 and @has_ipv6 will be set to
+ * indicate whether the respective protocols are available.
+ *
+ * Returns 0 on success, -1 on fatal error
+ */
+int socket_check_protocol_support(bool *has_ipv4, bool *has_ipv6);
diff --git a/tests/test-io-channel-socket.c b/tests/test-io-channel-socket.c
index b273fd3ba2..0597213f93 100644
--- a/tests/test-io-channel-socket.c
+++ b/tests/test-io-channel-socket.c
@@ -22,77 +22,9 @@
#include "io/channel-socket.h"
#include "io/channel-util.h"
#include "io-channel-helpers.h"
+#include "socket-helpers.h"
#include "qapi/error.h"
-#ifndef AI_ADDRCONFIG
-# define AI_ADDRCONFIG 0
-#endif
-#ifndef EAI_ADDRFAMILY
-# define EAI_ADDRFAMILY 0
-#endif
-
-static int check_bind(const char *hostname, bool *has_proto)
-{
- int fd = -1;
- struct addrinfo ai, *res = NULL;
- int rc;
- int ret = -1;
-
- memset(&ai, 0, sizeof(ai));
- ai.ai_flags = AI_CANONNAME | AI_ADDRCONFIG;
- ai.ai_family = AF_UNSPEC;
- ai.ai_socktype = SOCK_STREAM;
-
- /* lookup */
- rc = getaddrinfo(hostname, NULL, &ai, &res);
- if (rc != 0) {
- if (rc == EAI_ADDRFAMILY ||
- rc == EAI_FAMILY) {
- *has_proto = false;
- goto done;
- }
- goto cleanup;
- }
-
- fd = qemu_socket(res->ai_family, res->ai_socktype, res->ai_protocol);
- if (fd < 0) {
- goto cleanup;
- }
-
- if (bind(fd, res->ai_addr, res->ai_addrlen) < 0) {
- if (errno == EADDRNOTAVAIL) {
- *has_proto = false;
- goto done;
- }
- goto cleanup;
- }
-
- *has_proto = true;
- done:
- ret = 0;
-
- cleanup:
- if (fd != -1) {
- close(fd);
- }
- if (res) {
- freeaddrinfo(res);
- }
- return ret;
-}
-
-static int check_protocol_support(bool *has_ipv4, bool *has_ipv6)
-{
- if (check_bind("127.0.0.1", has_ipv4) < 0) {
- return -1;
- }
- if (check_bind("::1", has_ipv6) < 0) {
- return -1;
- }
-
- return 0;
-}
-
static void test_io_channel_set_socket_bufs(QIOChannel *src,
QIOChannel *dst)
@@ -566,7 +498,7 @@ int main(int argc, char **argv)
* each protocol to avoid breaking tests on machines
* with either IPv4 or IPv6 disabled.
*/
- if (check_protocol_support(&has_ipv4, &has_ipv6) < 0) {
+ if (socket_check_protocol_support(&has_ipv4, &has_ipv6) < 0) {
return 1;
}
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 4/9] sockets: strengthen test suite IP protocol availability checks
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (2 preceding siblings ...)
2018-03-12 20:12 ` [Qemu-devel] [PULL 3/9] sockets: pull code for testing IP availability out of specific test Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 5/9] sockets: move fd_is_socket() into common sockets code Daniel P. Berrangé
` (6 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
Instead of just checking whether it is possible to bind() on a socket, also
check that we can successfully connect() to the socket we bound to. This
more closely replicates the level of functionality that tests will actually
use.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
tests/socket-helpers.c | 67 +++++++++++++++++++++++++++++++++++++++++++-------
tests/socket-helpers.h | 4 +--
2 files changed, 60 insertions(+), 11 deletions(-)
diff --git a/tests/socket-helpers.c b/tests/socket-helpers.c
index 6f4bf07aa9..8112763f5b 100644
--- a/tests/socket-helpers.c
+++ b/tests/socket-helpers.c
@@ -30,10 +30,15 @@
# define EAI_ADDRFAMILY 0
#endif
-int socket_can_bind(const char *hostname)
+int socket_can_bind_connect(const char *hostname)
{
- int fd = -1;
+ int lfd = -1, cfd = -1, afd = -1;
struct addrinfo ai, *res = NULL;
+ struct sockaddr_storage ss;
+ socklen_t sslen = sizeof(ss);
+ int soerr;
+ socklen_t soerrlen = sizeof(soerr);
+ bool check_soerr = false;
int rc;
int ret = -1;
@@ -54,20 +59,64 @@ int socket_can_bind(const char *hostname)
goto cleanup;
}
- fd = qemu_socket(res->ai_family, res->ai_socktype, res->ai_protocol);
- if (fd < 0) {
+ lfd = qemu_socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (lfd < 0) {
goto cleanup;
}
- if (bind(fd, res->ai_addr, res->ai_addrlen) < 0) {
+ cfd = qemu_socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (cfd < 0) {
goto cleanup;
}
+ if (bind(lfd, res->ai_addr, res->ai_addrlen) < 0) {
+ goto cleanup;
+ }
+
+ if (listen(lfd, 1) < 0) {
+ goto cleanup;
+ }
+
+ if (getsockname(lfd, (struct sockaddr *)&ss, &sslen) < 0) {
+ goto cleanup;
+ }
+
+ qemu_set_nonblock(cfd);
+ if (connect(cfd, (struct sockaddr *)&ss, sslen) < 0) {
+ if (errno == EINPROGRESS) {
+ check_soerr = true;
+ } else {
+ goto cleanup;
+ }
+ }
+
+ sslen = sizeof(ss);
+ afd = accept(lfd, (struct sockaddr *)&ss, &sslen);
+ if (afd < 0) {
+ goto cleanup;
+ }
+
+ if (check_soerr) {
+ if (qemu_getsockopt(cfd, SOL_SOCKET, SO_ERROR, &soerr, &soerrlen) < 0) {
+ goto cleanup;
+ }
+ if (soerr) {
+ errno = soerr;
+ goto cleanup;
+ }
+ }
+
ret = 0;
cleanup:
- if (fd != -1) {
- close(fd);
+ if (afd != -1) {
+ close(afd);
+ }
+ if (cfd != -1) {
+ close(cfd);
+ }
+ if (lfd != -1) {
+ close(lfd);
}
if (res) {
freeaddrinfo(res);
@@ -80,7 +129,7 @@ int socket_check_protocol_support(bool *has_ipv4, bool *has_ipv6)
{
*has_ipv4 = *has_ipv6 = false;
- if (socket_can_bind("127.0.0.1") < 0) {
+ if (socket_can_bind_connect("127.0.0.1") < 0) {
if (errno != EADDRNOTAVAIL) {
return -1;
}
@@ -88,7 +137,7 @@ int socket_check_protocol_support(bool *has_ipv4, bool *has_ipv6)
*has_ipv4 = true;
}
- if (socket_can_bind("::1") < 0) {
+ if (socket_can_bind_connect("::1") < 0) {
if (errno != EADDRNOTAVAIL) {
return -1;
}
diff --git a/tests/socket-helpers.h b/tests/socket-helpers.h
index efa96eddc2..1c07d6d656 100644
--- a/tests/socket-helpers.h
+++ b/tests/socket-helpers.h
@@ -21,13 +21,13 @@
/*
* @hostname: a DNS name or numeric IP address
*
- * Check whether it is possible to bind to ports
+ * Check whether it is possible to bind & connect to ports
* on the DNS name or IP address @hostname. If an IP address
* is used, it must not be a wildcard address.
*
* Returns 0 on success, -1 on error with errno set
*/
-int socket_can_bind(const char *hostname);
+int socket_can_bind_connect(const char *hostname);
/*
* @has_ipv4: set to true on return if IPv4 is available
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 5/9] sockets: move fd_is_socket() into common sockets code
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (3 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 4/9] sockets: strengthen test suite IP protocol availability checks Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 6/9] sockets: check that the named file descriptor is a socket Daniel P. Berrangé
` (5 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
The fd_is_socket() helper method is useful in a few places, so put it in
the common sockets code. Make the code more compact while moving it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
include/qemu/sockets.h | 1 +
io/channel-util.c | 13 --------
tests/.gitignore | 1 +
tests/Makefile.include | 3 ++
tests/test-util-sockets.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++
util/qemu-sockets.c | 8 +++++
6 files changed, 90 insertions(+), 13 deletions(-)
create mode 100644 tests/test-util-sockets.c
diff --git a/include/qemu/sockets.h b/include/qemu/sockets.h
index e88d4c37ab..8140fea685 100644
--- a/include/qemu/sockets.h
+++ b/include/qemu/sockets.h
@@ -12,6 +12,7 @@ int inet_aton(const char *cp, struct in_addr *ia);
#include "qapi/qapi-types-sockets.h"
/* misc helpers */
+bool fd_is_socket(int fd);
int qemu_socket(int domain, int type, int protocol);
int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen);
int socket_set_cork(int fd, int v);
diff --git a/io/channel-util.c b/io/channel-util.c
index 0fb4bd0837..423d79845a 100644
--- a/io/channel-util.c
+++ b/io/channel-util.c
@@ -24,19 +24,6 @@
#include "io/channel-socket.h"
-static bool fd_is_socket(int fd)
-{
- int optval;
- socklen_t optlen;
- optlen = sizeof(optval);
- return qemu_getsockopt(fd,
- SOL_SOCKET,
- SO_TYPE,
- (char *)&optval,
- &optlen) == 0;
-}
-
-
QIOChannel *qio_channel_new_fd(int fd,
Error **errp)
{
diff --git a/tests/.gitignore b/tests/.gitignore
index 18e58b2183..fb62d2299b 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -86,6 +86,7 @@ test-thread-pool
test-throttle
test-timed-average
test-uuid
+test-util-sockets
test-visitor-serialization
test-vmstate
test-write-threshold
diff --git a/tests/Makefile.include b/tests/Makefile.include
index 3d5b6174a8..42fd426cd0 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -146,6 +146,7 @@ ifneq (,$(findstring qemu-ga,$(TOOLS)))
check-unit-$(CONFIG_LINUX) += tests/test-qga$(EXESUF)
endif
check-unit-y += tests/test-timed-average$(EXESUF)
+check-unit-y += tests/test-util-sockets$(EXESUF)
check-unit-y += tests/test-io-task$(EXESUF)
check-unit-y += tests/test-io-channel-socket$(EXESUF)
check-unit-y += tests/test-io-channel-file$(EXESUF)
@@ -713,6 +714,8 @@ tests/test-crypto-tlscredsx509$(EXESUF): tests/test-crypto-tlscredsx509.o \
tests/test-crypto-tlssession.o-cflags := $(TASN1_CFLAGS)
tests/test-crypto-tlssession$(EXESUF): tests/test-crypto-tlssession.o \
tests/crypto-tls-x509-helpers.o tests/pkix_asn1_tab.o $(test-crypto-obj-y)
+tests/test-util-sockets$(EXESUF): tests/test-util-sockets.o \
+ tests/socket-helpers.o $(test-util-obj-y)
tests/test-io-task$(EXESUF): tests/test-io-task.o $(test-io-obj-y)
tests/test-io-channel-socket$(EXESUF): tests/test-io-channel-socket.o \
tests/io-channel-helpers.o tests/socket-helpers.o $(test-io-obj-y)
diff --git a/tests/test-util-sockets.c b/tests/test-util-sockets.c
new file mode 100644
index 0000000000..65190e0530
--- /dev/null
+++ b/tests/test-util-sockets.c
@@ -0,0 +1,77 @@
+/*
+ * Tests for util/qemu-sockets.c
+ *
+ * Copyright 2018 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/sockets.h"
+#include "qapi/error.h"
+#include "socket-helpers.h"
+
+static void test_fd_is_socket_bad(void)
+{
+ char *tmp = g_strdup("qemu-test-util-sockets-XXXXXX");
+ int fd = mkstemp(tmp);
+ if (fd != 0) {
+ unlink(tmp);
+ }
+ g_free(tmp);
+
+ g_assert(fd >= 0);
+
+ g_assert(!fd_is_socket(fd));
+ close(fd);
+}
+
+static void test_fd_is_socket_good(void)
+{
+ int fd = qemu_socket(PF_INET, SOCK_STREAM, 0);
+
+ g_assert(fd >= 0);
+
+ g_assert(fd_is_socket(fd));
+ close(fd);
+}
+
+int main(int argc, char **argv)
+{
+ bool has_ipv4, has_ipv6;
+
+ socket_init();
+
+ g_test_init(&argc, &argv, NULL);
+
+ /* We're creating actual IPv4/6 sockets, so we should
+ * check if the host running tests actually supports
+ * each protocol to avoid breaking tests on machines
+ * with either IPv4 or IPv6 disabled.
+ */
+ if (socket_check_protocol_support(&has_ipv4, &has_ipv6) < 0) {
+ return 1;
+ }
+
+ if (has_ipv4) {
+ g_test_add_func("/util/socket/is-socket/bad",
+ test_fd_is_socket_bad);
+ g_test_add_func("/util/socket/is-socket/good",
+ test_fd_is_socket_good);
+ }
+
+ return g_test_run();
+}
diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
index 7f13e8a338..fa79471647 100644
--- a/util/qemu-sockets.c
+++ b/util/qemu-sockets.c
@@ -91,6 +91,14 @@ NetworkAddressFamily inet_netfamily(int family)
return NETWORK_ADDRESS_FAMILY_UNKNOWN;
}
+bool fd_is_socket(int fd)
+{
+ int optval;
+ socklen_t optlen = sizeof(optval);
+ return !qemu_getsockopt(fd, SOL_SOCKET, SO_TYPE, &optval, &optlen);
+}
+
+
/*
* Matrix we're trying to apply
*
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 6/9] sockets: check that the named file descriptor is a socket
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (4 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 5/9] sockets: move fd_is_socket() into common sockets code Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 7/9] sockets: allow SocketAddress 'fd' to reference numeric file descriptors Daniel P. Berrangé
` (4 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
The SocketAddress struct has an "fd" type, which references the name of a
file descriptor passed over the monitor using the "getfd" command. We
currently blindly assume the FD is a socket, which can lead to hard to
diagnose errors later. This adds an explicit check that the FD is actually
a socket to improve the error diagnosis.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
tests/test-util-sockets.c | 89 +++++++++++++++++++++++++++++++++++++++++++++++
util/qemu-sockets.c | 18 ++++++++--
2 files changed, 105 insertions(+), 2 deletions(-)
diff --git a/tests/test-util-sockets.c b/tests/test-util-sockets.c
index 65190e0530..06eb0e4a28 100644
--- a/tests/test-util-sockets.c
+++ b/tests/test-util-sockets.c
@@ -23,6 +23,7 @@
#include "qemu/sockets.h"
#include "qapi/error.h"
#include "socket-helpers.h"
+#include "monitor/monitor.h"
static void test_fd_is_socket_bad(void)
{
@@ -49,6 +50,90 @@ static void test_fd_is_socket_good(void)
close(fd);
}
+static int mon_fd = -1;
+static const char *mon_fdname;
+
+int monitor_get_fd(Monitor *mon, const char *fdname, Error **errp)
+{
+ g_assert(cur_mon);
+ g_assert(mon == cur_mon);
+ if (mon_fd == -1 || !g_str_equal(mon_fdname, fdname)) {
+ error_setg(errp, "No fd named %s", fdname);
+ return -1;
+ }
+ return dup(mon_fd);
+}
+
+/* Syms in libqemustub.a are discarded at .o file granularity.
+ * To replace monitor_get_fd() we must ensure everything in
+ * stubs/monitor.c is defined, to make sure monitor.o is discarded
+ * otherwise we get duplicate syms at link time.
+ */
+Monitor *cur_mon;
+void monitor_init(Chardev *chr, int flags) {}
+
+
+static void test_socket_fd_pass_good(void)
+{
+ SocketAddress addr;
+ int fd;
+
+ cur_mon = g_malloc(1); /* Fake a monitor */
+ mon_fdname = "myfd";
+ mon_fd = qemu_socket(AF_INET, SOCK_STREAM, 0);
+ g_assert_cmpint(mon_fd, >, STDERR_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup(mon_fdname);
+
+ fd = socket_connect(&addr, &error_abort);
+ g_assert_cmpint(fd, !=, -1);
+ g_assert_cmpint(fd, !=, mon_fd);
+ close(fd);
+
+ fd = socket_listen(&addr, &error_abort);
+ g_assert_cmpint(fd, !=, -1);
+ g_assert_cmpint(fd, !=, mon_fd);
+ close(fd);
+
+ g_free(addr.u.fd.str);
+ mon_fdname = NULL;
+ close(mon_fd);
+ mon_fd = -1;
+ g_free(cur_mon);
+ cur_mon = NULL;
+}
+
+static void test_socket_fd_pass_bad(void)
+{
+ SocketAddress addr;
+ Error *err = NULL;
+ int fd;
+
+ cur_mon = g_malloc(1); /* Fake a monitor */
+ mon_fdname = "myfd";
+ mon_fd = dup(STDOUT_FILENO);
+ g_assert_cmpint(mon_fd, >, STDERR_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup(mon_fdname);
+
+ fd = socket_connect(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ fd = socket_listen(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ g_free(addr.u.fd.str);
+ mon_fdname = NULL;
+ close(mon_fd);
+ mon_fd = -1;
+ g_free(cur_mon);
+ cur_mon = NULL;
+}
+
int main(int argc, char **argv)
{
bool has_ipv4, has_ipv6;
@@ -71,6 +156,10 @@ int main(int argc, char **argv)
test_fd_is_socket_bad);
g_test_add_func("/util/socket/is-socket/good",
test_fd_is_socket_good);
+ g_test_add_func("/socket/fd-pass/good",
+ test_socket_fd_pass_good);
+ g_test_add_func("/socket/fd-pass/bad",
+ test_socket_fd_pass_bad);
}
return g_test_run();
diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
index fa79471647..6dc4613855 100644
--- a/util/qemu-sockets.c
+++ b/util/qemu-sockets.c
@@ -1042,6 +1042,20 @@ fail:
return NULL;
}
+static int socket_get_fd(const char *fdstr, Error **errp)
+{
+ int fd = monitor_get_fd(cur_mon, fdstr, errp);
+ if (fd < 0) {
+ return -1;
+ }
+ if (!fd_is_socket(fd)) {
+ error_setg(errp, "File descriptor '%s' is not a socket", fdstr);
+ close(fd);
+ return -1;
+ }
+ return fd;
+}
+
int socket_connect(SocketAddress *addr, Error **errp)
{
int fd;
@@ -1056,7 +1070,7 @@ int socket_connect(SocketAddress *addr, Error **errp)
break;
case SOCKET_ADDRESS_TYPE_FD:
- fd = monitor_get_fd(cur_mon, addr->u.fd.str, errp);
+ fd = socket_get_fd(addr->u.fd.str, errp);
break;
case SOCKET_ADDRESS_TYPE_VSOCK:
@@ -1083,7 +1097,7 @@ int socket_listen(SocketAddress *addr, Error **errp)
break;
case SOCKET_ADDRESS_TYPE_FD:
- fd = monitor_get_fd(cur_mon, addr->u.fd.str, errp);
+ fd = socket_get_fd(addr->u.fd.str, errp);
break;
case SOCKET_ADDRESS_TYPE_VSOCK:
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 7/9] sockets: allow SocketAddress 'fd' to reference numeric file descriptors
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (5 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 6/9] sockets: check that the named file descriptor is a socket Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 8/9] char: refactor parsing of socket address information Daniel P. Berrangé
` (3 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
The SocketAddress 'fd' kind accepts the name of a file descriptor passed
to the monitor with the 'getfd' command. This makes it impossible to use
the 'fd' kind in cases where a monitor is not available. This can apply in
handling command line argv at startup, or simply if internal code wants to
use SocketAddress and pass a numeric FD it has acquired from elsewhere.
Fortunately the 'getfd' command mandated that the FD names must not start
with a leading digit. We can thus safely extend semantics of the
SocketAddress 'fd' kind, to allow a purely numeric name to reference an
file descriptor that QEMU already has open. There will be restrictions on
when each kind can be used.
In codepaths where we are handling a monitor command (ie cur_mon != NULL),
we will only support use of named file descriptors as before. Use of FD
numbers is still not permitted for monitor commands.
In codepaths where we are not handling a monitor command (ie cur_mon ==
NULL), we will not support named file descriptors. Instead we can reference
FD numers explicitly. This allows the app spawning QEMU to intentionally
"leak" a pre-opened socket to QEMU and reference that in a SocketAddress
definition, or for code inside QEMU to pass pre-opened FDs around.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
qapi/sockets.json | 7 +++
tests/test-util-sockets.c | 112 +++++++++++++++++++++++++++++++++++++++++++---
util/qemu-sockets.c | 16 +++++--
3 files changed, 126 insertions(+), 9 deletions(-)
diff --git a/qapi/sockets.json b/qapi/sockets.json
index ac022c6ad0..fc81d8d5e8 100644
--- a/qapi/sockets.json
+++ b/qapi/sockets.json
@@ -123,6 +123,13 @@
#
# @unix: Unix domain socket
#
+# @vsock: VMCI address
+#
+# @fd: decimal is for file descriptor number, otherwise a file descriptor name.
+# Named file descriptors are permitted in monitor commands, in combination
+# with the 'getfd' command. Decimal file descriptors are permitted at
+# startup or other contexts where no monitor context is active.
+#
# Since: 2.9
##
{ 'enum': 'SocketAddressType',
diff --git a/tests/test-util-sockets.c b/tests/test-util-sockets.c
index 06eb0e4a28..acadd85e8f 100644
--- a/tests/test-util-sockets.c
+++ b/tests/test-util-sockets.c
@@ -73,7 +73,7 @@ Monitor *cur_mon;
void monitor_init(Chardev *chr, int flags) {}
-static void test_socket_fd_pass_good(void)
+static void test_socket_fd_pass_name_good(void)
{
SocketAddress addr;
int fd;
@@ -104,7 +104,7 @@ static void test_socket_fd_pass_good(void)
cur_mon = NULL;
}
-static void test_socket_fd_pass_bad(void)
+static void test_socket_fd_pass_name_bad(void)
{
SocketAddress addr;
Error *err = NULL;
@@ -134,6 +134,98 @@ static void test_socket_fd_pass_bad(void)
cur_mon = NULL;
}
+static void test_socket_fd_pass_name_nomon(void)
+{
+ SocketAddress addr;
+ Error *err = NULL;
+ int fd;
+
+ g_assert(cur_mon == NULL);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup("myfd");
+
+ fd = socket_connect(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ fd = socket_listen(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ g_free(addr.u.fd.str);
+}
+
+
+static void test_socket_fd_pass_num_good(void)
+{
+ SocketAddress addr;
+ int fd, sfd;
+
+ g_assert(cur_mon == NULL);
+ sfd = qemu_socket(AF_INET, SOCK_STREAM, 0);
+ g_assert_cmpint(sfd, >, STDERR_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup_printf("%d", sfd);
+
+ fd = socket_connect(&addr, &error_abort);
+ g_assert_cmpint(fd, ==, sfd);
+
+ fd = socket_listen(&addr, &error_abort);
+ g_assert_cmpint(fd, ==, sfd);
+
+ g_free(addr.u.fd.str);
+ close(sfd);
+}
+
+static void test_socket_fd_pass_num_bad(void)
+{
+ SocketAddress addr;
+ Error *err = NULL;
+ int fd, sfd;
+
+ g_assert(cur_mon == NULL);
+ sfd = dup(STDOUT_FILENO);
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup_printf("%d", sfd);
+
+ fd = socket_connect(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ fd = socket_listen(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ g_free(addr.u.fd.str);
+ close(sfd);
+}
+
+static void test_socket_fd_pass_num_nocli(void)
+{
+ SocketAddress addr;
+ Error *err = NULL;
+ int fd;
+
+ cur_mon = g_malloc(1); /* Fake a monitor */
+
+ addr.type = SOCKET_ADDRESS_TYPE_FD;
+ addr.u.fd.str = g_strdup_printf("%d", STDOUT_FILENO);
+
+ fd = socket_connect(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ fd = socket_listen(&addr, &err);
+ g_assert_cmpint(fd, ==, -1);
+ error_free_or_abort(&err);
+
+ g_free(addr.u.fd.str);
+}
+
+
int main(int argc, char **argv)
{
bool has_ipv4, has_ipv6;
@@ -156,10 +248,18 @@ int main(int argc, char **argv)
test_fd_is_socket_bad);
g_test_add_func("/util/socket/is-socket/good",
test_fd_is_socket_good);
- g_test_add_func("/socket/fd-pass/good",
- test_socket_fd_pass_good);
- g_test_add_func("/socket/fd-pass/bad",
- test_socket_fd_pass_bad);
+ g_test_add_func("/socket/fd-pass/name/good",
+ test_socket_fd_pass_name_good);
+ g_test_add_func("/socket/fd-pass/name/bad",
+ test_socket_fd_pass_name_bad);
+ g_test_add_func("/socket/fd-pass/name/nomon",
+ test_socket_fd_pass_name_nomon);
+ g_test_add_func("/socket/fd-pass/num/good",
+ test_socket_fd_pass_num_good);
+ g_test_add_func("/socket/fd-pass/num/bad",
+ test_socket_fd_pass_num_bad);
+ g_test_add_func("/socket/fd-pass/num/nocli",
+ test_socket_fd_pass_num_nocli);
}
return g_test_run();
diff --git a/util/qemu-sockets.c b/util/qemu-sockets.c
index 6dc4613855..8bd8bb64eb 100644
--- a/util/qemu-sockets.c
+++ b/util/qemu-sockets.c
@@ -1044,9 +1044,19 @@ fail:
static int socket_get_fd(const char *fdstr, Error **errp)
{
- int fd = monitor_get_fd(cur_mon, fdstr, errp);
- if (fd < 0) {
- return -1;
+ int fd;
+ if (cur_mon) {
+ fd = monitor_get_fd(cur_mon, fdstr, errp);
+ if (fd < 0) {
+ return -1;
+ }
+ } else {
+ if (qemu_strtoi(fdstr, NULL, 10, &fd) < 0) {
+ error_setg_errno(errp, errno,
+ "Unable to parse FD number %s",
+ fdstr);
+ return -1;
+ }
}
if (!fd_is_socket(fd)) {
error_setg(errp, "File descriptor '%s' is not a socket", fdstr);
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 8/9] char: refactor parsing of socket address information
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (6 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 7/9] sockets: allow SocketAddress 'fd' to reference numeric file descriptors Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:13 ` [Qemu-devel] [PULL 9/9] char: allow passing pre-opened socket file descriptor at startup Daniel P. Berrangé
` (2 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
To prepare for handling more address types, refactor the parsing of
socket address information to make it more robust and extensible.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
chardev/char-socket.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/chardev/char-socket.c b/chardev/char-socket.c
index 1a371b91ac..a916ef4012 100644
--- a/chardev/char-socket.c
+++ b/chardev/char-socket.c
@@ -1012,21 +1012,25 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
SocketAddressLegacy *addr;
ChardevSocket *sock;
+ if ((!!path + !!host) != 1) {
+ error_setg(errp,
+ "Exactly one of 'path' or 'host' required");
+ return;
+ }
+
backend->type = CHARDEV_BACKEND_KIND_SOCKET;
- if (!path) {
- if (!host) {
- error_setg(errp, "chardev: socket: no host given");
+ if (path) {
+ if (tls_creds) {
+ error_setg(errp, "TLS can only be used over TCP socket");
return;
}
+ } else if (host) {
if (!port) {
error_setg(errp, "chardev: socket: no port given");
return;
}
} else {
- if (tls_creds) {
- error_setg(errp, "TLS can only be used over TCP socket");
- return;
- }
+ g_assert_not_reached();
}
sock = backend->u.socket.data = g_new0(ChardevSocket, 1);
@@ -1052,7 +1056,7 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
addr->type = SOCKET_ADDRESS_LEGACY_KIND_UNIX;
q_unix = addr->u.q_unix.data = g_new0(UnixSocketAddress, 1);
q_unix->path = g_strdup(path);
- } else {
+ } else if (host) {
addr->type = SOCKET_ADDRESS_LEGACY_KIND_INET;
addr->u.inet.data = g_new(InetSocketAddress, 1);
*addr->u.inet.data = (InetSocketAddress) {
@@ -1065,6 +1069,8 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
.has_ipv6 = qemu_opt_get(opts, "ipv6"),
.ipv6 = qemu_opt_get_bool(opts, "ipv6", 0),
};
+ } else {
+ g_assert_not_reached();
}
sock->addr = addr;
}
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* [Qemu-devel] [PULL 9/9] char: allow passing pre-opened socket file descriptor at startup
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (7 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 8/9] char: refactor parsing of socket address information Daniel P. Berrangé
@ 2018-03-12 20:13 ` Daniel P. Berrangé
2018-03-12 20:27 ` [Qemu-devel] [PULL 0/9] Socket next patches no-reply
2018-03-13 16:20 ` Peter Maydell
10 siblings, 0 replies; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-12 20:13 UTC (permalink / raw)
To: qemu-devel
Cc: Daniel P. Berrangé,
Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini, Peter Maydell
From: "Daniel P. Berrange" <berrange@redhat.com>
When starting QEMU management apps will usually setup a monitor socket, and
then open it immediately after startup. If not using QEMU's own -daemonize
arg, this process can be troublesome to handle correctly. The mgmt app will
need to repeatedly call connect() until it succeeds, because it does not
know when QEMU has created the listener socket. If can't retry connect()
forever though, because an error might have caused QEMU to exit before it
even creates the monitor.
The obvious way to fix this kind of problem is to just pass in a pre-opened
socket file descriptor for the QEMU monitor to listen on. The management
app can now immediately call connect() just once. If connect() fails it
knows that QEMU has exited with an error.
The SocketAddress(Legacy) structs allow for FD passing via the monitor, and
now via inherited file descriptors from the process that spawned QEMU. The
final missing piece is adding a 'fd' parameter in the socket chardev
options.
This allows both HMP usage, pass any FD number with SCM_RIGHTS, then
running HMP commands:
getfd myfd
chardev-add socket,fd=myfd
Note that numeric FDs cannot be referenced directly in HMP, only named FDs.
And also CLI usage, by leak FD 3 from parent by clearing O_CLOEXEC, then
spawning QEMU with
-chardev socket,fd=3,id=mon
-mon chardev=mon,mode=control
Note that named FDs cannot be referenced in CLI args, only numeric FDs.
We do not wire this up in the legacy chardev syntax, so you cannot use FD
passing with '-qmp', you must use the modern '-mon' + '-chardev' pair.
When passing pre-opened FDs there is a restriction on use of TLS encryption.
It can be used on a server socket chardev, but cannot be used for a client
socket chardev. This is because when validating a server's certificate, the
client needs to have a hostname available to match against the certificate
identity.
An illustrative example of usage is:
#!/usr/bin/perl
use IO::Socket::UNIX;
use Fcntl;
unlink "/tmp/qmp";
my $srv = IO::Socket::UNIX->new(
Type => SOCK_STREAM(),
Local => "/tmp/qmp",
Listen => 1,
);
my $flags = fcntl $srv, F_GETFD, 0;
fcntl $srv, F_SETFD, $flags & ~FD_CLOEXEC;
my $fd = $srv->fileno();
exec "qemu-system-x86_64", \
"-chardev", "socket,fd=$fd,server,nowait,id=mon", \
"-mon", "chardev=mon,mode=control";
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
chardev/char-socket.c | 15 +++++++++++++--
chardev/char.c | 3 +++
tests/test-char.c | 47 ++++++++++++++++++++++++++++++++++++++++++++---
3 files changed, 60 insertions(+), 5 deletions(-)
diff --git a/chardev/char-socket.c b/chardev/char-socket.c
index a916ef4012..0c8d6d430a 100644
--- a/chardev/char-socket.c
+++ b/chardev/char-socket.c
@@ -1008,13 +1008,14 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
const char *path = qemu_opt_get(opts, "path");
const char *host = qemu_opt_get(opts, "host");
const char *port = qemu_opt_get(opts, "port");
+ const char *fd = qemu_opt_get(opts, "fd");
const char *tls_creds = qemu_opt_get(opts, "tls-creds");
SocketAddressLegacy *addr;
ChardevSocket *sock;
- if ((!!path + !!host) != 1) {
+ if ((!!path + !!fd + !!host) != 1) {
error_setg(errp,
- "Exactly one of 'path' or 'host' required");
+ "Exactly one of 'path', 'fd' or 'host' required");
return;
}
@@ -1029,6 +1030,12 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
error_setg(errp, "chardev: socket: no port given");
return;
}
+ } else if (fd) {
+ /* We don't know what host to validate against when in client mode */
+ if (tls_creds && !is_listen) {
+ error_setg(errp, "TLS can not be used with pre-opened client FD");
+ return;
+ }
} else {
g_assert_not_reached();
}
@@ -1069,6 +1076,10 @@ static void qemu_chr_parse_socket(QemuOpts *opts, ChardevBackend *backend,
.has_ipv6 = qemu_opt_get(opts, "ipv6"),
.ipv6 = qemu_opt_get_bool(opts, "ipv6", 0),
};
+ } else if (fd) {
+ addr->type = SOCKET_ADDRESS_LEGACY_KIND_FD;
+ addr->u.fd.data = g_new(String, 1);
+ addr->u.fd.data->str = g_strdup(fd);
} else {
g_assert_not_reached();
}
diff --git a/chardev/char.c b/chardev/char.c
index 5d7b079ef0..f7e0d37f24 100644
--- a/chardev/char.c
+++ b/chardev/char.c
@@ -807,6 +807,9 @@ QemuOptsList qemu_chardev_opts = {
},{
.name = "port",
.type = QEMU_OPT_STRING,
+ },{
+ .name = "fd",
+ .type = QEMU_OPT_STRING,
},{
.name = "localaddr",
.type = QEMU_OPT_STRING,
diff --git a/tests/test-char.c b/tests/test-char.c
index b3a77af085..dffb354202 100644
--- a/tests/test-char.c
+++ b/tests/test-char.c
@@ -302,9 +302,8 @@ static int socket_can_read_hello(void *opaque)
return 10;
}
-static void char_socket_test(void)
+static void char_socket_test_common(Chardev *chr)
{
- Chardev *chr = qemu_chr_new("server", "tcp:127.0.0.1:0,server,nowait");
Chardev *chr_client;
QObject *addr;
QDict *qdict;
@@ -359,6 +358,47 @@ static void char_socket_test(void)
object_unparent(OBJECT(chr));
}
+
+static void char_socket_basic_test(void)
+{
+ Chardev *chr = qemu_chr_new("server", "tcp:127.0.0.1:0,server,nowait");
+
+ char_socket_test_common(chr);
+}
+
+
+static void char_socket_fdpass_test(void)
+{
+ Chardev *chr;
+ char *optstr;
+ QemuOpts *opts;
+ int fd;
+ SocketAddress *addr = g_new0(SocketAddress, 1);
+
+ addr->type = SOCKET_ADDRESS_TYPE_INET;
+ addr->u.inet.host = g_strdup("127.0.0.1");
+ addr->u.inet.port = g_strdup("0");
+
+ fd = socket_listen(addr, &error_abort);
+ g_assert(fd >= 0);
+
+ qapi_free_SocketAddress(addr);
+
+ optstr = g_strdup_printf("socket,id=cdev,fd=%d,server,nowait", fd);
+
+ opts = qemu_opts_parse_noisily(qemu_find_opts("chardev"),
+ optstr, true);
+ g_free(optstr);
+ g_assert_nonnull(opts);
+
+ chr = qemu_chr_new_from_opts(opts, &error_abort);
+
+ qemu_opts_del(opts);
+
+ char_socket_test_common(chr);
+}
+
+
#ifndef _WIN32
static void char_pipe_test(void)
{
@@ -775,7 +815,8 @@ int main(int argc, char **argv)
#ifndef _WIN32
g_test_add_func("/char/file-fifo", char_file_fifo_test);
#endif
- g_test_add_func("/char/socket", char_socket_test);
+ g_test_add_func("/char/socket/basic", char_socket_basic_test);
+ g_test_add_func("/char/socket/fdpass", char_socket_fdpass_test);
g_test_add_func("/char/udp", char_udp_test);
#ifdef HAVE_CHARDEV_SERIAL
g_test_add_func("/char/serial", char_serial_test);
--
2.14.3
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 0/9] Socket next patches
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (8 preceding siblings ...)
2018-03-12 20:13 ` [Qemu-devel] [PULL 9/9] char: allow passing pre-opened socket file descriptor at startup Daniel P. Berrangé
@ 2018-03-12 20:27 ` no-reply
2018-03-13 16:20 ` Peter Maydell
10 siblings, 0 replies; 17+ messages in thread
From: no-reply @ 2018-03-12 20:27 UTC (permalink / raw)
To: berrange
Cc: famz, qemu-devel, peter.maydell, armbru, kraxel,
marcandre.lureau, pbonzini
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 20180312201305.16972-1-berrange@redhat.com
Subject: [Qemu-devel] [PULL 0/9] Socket next patches
=== TEST SCRIPT BEGIN ===
#!/bin/bash
BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
failed=1
echo
fi
n=$((n+1))
done
exit $failed
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/20180312201305.16972-1-berrange@redhat.com -> patchew/20180312201305.16972-1-berrange@redhat.com
Switched to a new branch 'test'
b48aef2db5 char: allow passing pre-opened socket file descriptor at startup
7acac469a5 char: refactor parsing of socket address information
52a971acae sockets: allow SocketAddress 'fd' to reference numeric file descriptors
3c42c553df sockets: check that the named file descriptor is a socket
fd55c60083 sockets: move fd_is_socket() into common sockets code
3c1dd42246 sockets: strengthen test suite IP protocol availability checks
56581333a1 sockets: pull code for testing IP availability out of specific test
1487a31959 cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
3623d8518e char: don't silently skip tn3270 protocol init when TLS is enabled
=== OUTPUT BEGIN ===
Checking PATCH 1/9: char: don't silently skip tn3270 protocol init when TLS is enabled...
Checking PATCH 2/9: cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types...
ERROR: consider using qemu_strtol in preference to strtol
#753: FILE: util/cutils.c:338:
+ lresult = strtol(nptr, &ep, base);
ERROR: consider using qemu_strtoul in preference to strtoul
#805: FILE: util/cutils.c:390:
+ lresult = strtoul(nptr, &ep, base);
total: 2 errors, 0 warnings, 793 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 3/9: sockets: pull code for testing IP availability out of specific test...
Checking PATCH 4/9: sockets: strengthen test suite IP protocol availability checks...
Checking PATCH 5/9: sockets: move fd_is_socket() into common sockets code...
Checking PATCH 6/9: sockets: check that the named file descriptor is a socket...
Checking PATCH 7/9: sockets: allow SocketAddress 'fd' to reference numeric file descriptors...
Checking PATCH 8/9: char: refactor parsing of socket address information...
Checking PATCH 9/9: char: allow passing pre-opened socket file descriptor at startup...
=== OUTPUT END ===
Test command exited with code: 1
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@freelists.org
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 0/9] Socket next patches
2018-03-12 20:12 [Qemu-devel] [PULL 0/9] Socket next patches Daniel P. Berrangé
` (9 preceding siblings ...)
2018-03-12 20:27 ` [Qemu-devel] [PULL 0/9] Socket next patches no-reply
@ 2018-03-13 16:20 ` Peter Maydell
2018-03-13 16:27 ` Daniel P. Berrangé
10 siblings, 1 reply; 17+ messages in thread
From: Peter Maydell @ 2018-03-13 16:20 UTC (permalink / raw)
To: Daniel P. Berrangé
Cc: QEMU Developers, Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini
On 12 March 2018 at 20:12, Daniel P. Berrangé <berrange@redhat.com> wrote:
> The following changes since commit 819fd4699c7b36d574292bcbd8bc25e9d716c84b:
>
> Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180309a' into staging (2018-03-12 13:21:53 +0000)
>
> are available in the Git repository at:
>
> https://github.com/berrange/qemu tags/socket-next-pull-request
>
> for you to fetch changes up to f4d2a296de2ccf5ff80ddd343c09f0075d10583a:
>
> char: allow passing pre-opened socket file descriptor at startup (2018-03-12 17:50:52 +0000)
>
> ----------------------------------------------------------------
>
> ----------------------------------------------------------------
>
> Daniel P. Berrangé (9):
> char: don't silently skip tn3270 protocol init when TLS is enabled
> cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int
> types
> sockets: pull code for testing IP availability out of specific test
> sockets: strengthen test suite IP protocol availability checks
> sockets: move fd_is_socket() into common sockets code
> sockets: check that the named file descriptor is a socket
> sockets: allow SocketAddress 'fd' to reference numeric file
> descriptors
> char: refactor parsing of socket address information
> char: allow passing pre-opened socket file descriptor at startup
>
Test failure, 32-bit arm:
MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
gtester -k --verbose -m=quick tests/test-c
utils
TEST: tests/test-cutils... (pid=21029)
/cutils/parse_uint/null: OK
[etc]
/cutils/parse_uint_full/trailing: **
ERROR:/home/peter.maydell/qemu/tests/test-cutils.c:715:test_qemu_strtoui_underflow:
assertion failed (err =
= -ERANGE): (0 == -34)
OK
/cutils/parse_uint_full/correct: OK
Test failure, x86-64 Linux:
TEST: tests/boot-serial-test... (pid=11205)
/sparc64/boot-serial/sun4u: **
ERROR:/home/petmay01/linaro/qemu-for-merges/tests/boot-serial-test.c:137:check_guest_output:
assertion failed: (output_ok)
FAIL
GTester: last random seed: R02S99166ae475faeb3280608eeed6d61c4f
(pid=15216)
Test failure, 64-bit arm:
ERROR:/home/pm215/qemu/tests/test-aio-multithread.c:365:test_multi_fair_mutex:
assertion failed (counter ==
atomic_counter): (59827 == 59828)
thanks
-- PMM
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 0/9] Socket next patches
2018-03-13 16:20 ` Peter Maydell
@ 2018-03-13 16:27 ` Daniel P. Berrangé
2018-03-13 18:23 ` Daniel P. Berrangé
0 siblings, 1 reply; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-13 16:27 UTC (permalink / raw)
To: Peter Maydell
Cc: QEMU Developers, Gerd Hoffmann, Markus Armbruster, Eric Blake,
Marc-André Lureau, Paolo Bonzini
On Tue, Mar 13, 2018 at 04:20:19PM +0000, Peter Maydell wrote:
> On 12 March 2018 at 20:12, Daniel P. Berrangé <berrange@redhat.com> wrote:
> > The following changes since commit 819fd4699c7b36d574292bcbd8bc25e9d716c84b:
> >
> > Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180309a' into staging (2018-03-12 13:21:53 +0000)
> >
> > are available in the Git repository at:
> >
> > https://github.com/berrange/qemu tags/socket-next-pull-request
> >
> > for you to fetch changes up to f4d2a296de2ccf5ff80ddd343c09f0075d10583a:
> >
> > char: allow passing pre-opened socket file descriptor at startup (2018-03-12 17:50:52 +0000)
> >
> > ----------------------------------------------------------------
> >
> > ----------------------------------------------------------------
> >
> > Daniel P. Berrangé (9):
> > char: don't silently skip tn3270 protocol init when TLS is enabled
> > cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int
> > types
> > sockets: pull code for testing IP availability out of specific test
> > sockets: strengthen test suite IP protocol availability checks
> > sockets: move fd_is_socket() into common sockets code
> > sockets: check that the named file descriptor is a socket
> > sockets: allow SocketAddress 'fd' to reference numeric file
> > descriptors
> > char: refactor parsing of socket address information
> > char: allow passing pre-opened socket file descriptor at startup
> >
>
> Test failure, 32-bit arm:
>
> MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
> gtester -k --verbose -m=quick tests/test-c
> utils
> TEST: tests/test-cutils... (pid=21029)
> /cutils/parse_uint/null: OK
> [etc]
> /cutils/parse_uint_full/trailing: **
> ERROR:/home/peter.maydell/qemu/tests/test-cutils.c:715:test_qemu_strtoui_underflow:
> assertion failed (err =
> = -ERANGE): (0 == -34)
This will be a genuine bug. Not sure if its in the test case or code
yet....
> OK
> /cutils/parse_uint_full/correct: OK
>
> Test failure, x86-64 Linux:
>
> TEST: tests/boot-serial-test... (pid=11205)
> /sparc64/boot-serial/sun4u: **
> ERROR:/home/petmay01/linaro/qemu-for-merges/tests/boot-serial-test.c:137:check_guest_output:
> assertion failed: (output_ok)
> FAIL
> GTester: last random seed: R02S99166ae475faeb3280608eeed6d61c4f
> (pid=15216)
This feels unrelated to the series, so possibly a non-deterministic
failure
>
> Test failure, 64-bit arm:
>
> ERROR:/home/pm215/qemu/tests/test-aio-multithread.c:365:test_multi_fair_mutex:
> assertion failed (counter ==
> atomic_counter): (59827 == 59828)
I'm sure I've seen this non-deterministic failure before, unrelated to
this series.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 0/9] Socket next patches
2018-03-13 16:27 ` Daniel P. Berrangé
@ 2018-03-13 18:23 ` Daniel P. Berrangé
2018-03-13 18:26 ` Peter Maydell
0 siblings, 1 reply; 17+ messages in thread
From: Daniel P. Berrangé @ 2018-03-13 18:23 UTC (permalink / raw)
To: Peter Maydell
Cc: Markus Armbruster, QEMU Developers, Gerd Hoffmann,
Marc-André Lureau, Paolo Bonzini
On Tue, Mar 13, 2018 at 04:27:08PM +0000, Daniel P. Berrangé wrote:
> On Tue, Mar 13, 2018 at 04:20:19PM +0000, Peter Maydell wrote:
> > On 12 March 2018 at 20:12, Daniel P. Berrangé <berrange@redhat.com> wrote:
> > > The following changes since commit 819fd4699c7b36d574292bcbd8bc25e9d716c84b:
> > >
> > > Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180309a' into staging (2018-03-12 13:21:53 +0000)
> > >
> > > are available in the Git repository at:
> > >
> > > https://github.com/berrange/qemu tags/socket-next-pull-request
> > >
> > > for you to fetch changes up to f4d2a296de2ccf5ff80ddd343c09f0075d10583a:
> > >
> > > char: allow passing pre-opened socket file descriptor at startup (2018-03-12 17:50:52 +0000)
> > >
> > > ----------------------------------------------------------------
> > >
> > > ----------------------------------------------------------------
> > >
> > > Daniel P. Berrangé (9):
> > > char: don't silently skip tn3270 protocol init when TLS is enabled
> > > cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int
> > > types
> > > sockets: pull code for testing IP availability out of specific test
> > > sockets: strengthen test suite IP protocol availability checks
> > > sockets: move fd_is_socket() into common sockets code
> > > sockets: check that the named file descriptor is a socket
> > > sockets: allow SocketAddress 'fd' to reference numeric file
> > > descriptors
> > > char: refactor parsing of socket address information
> > > char: allow passing pre-opened socket file descriptor at startup
> > >
> >
> > Test failure, 32-bit arm:
> >
> > MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))}
> > gtester -k --verbose -m=quick tests/test-c
> > utils
> > TEST: tests/test-cutils... (pid=21029)
> > /cutils/parse_uint/null: OK
> > [etc]
> > /cutils/parse_uint_full/trailing: **
> > ERROR:/home/peter.maydell/qemu/tests/test-cutils.c:715:test_qemu_strtoui_underflow:
> > assertion failed (err =
> > = -ERANGE): (0 == -34)
>
> This will be a genuine bug. Not sure if its in the test case or code
> yet....
>
> > OK
> > /cutils/parse_uint_full/correct: OK
> >
> > Test failure, x86-64 Linux:
> >
> > TEST: tests/boot-serial-test... (pid=11205)
> > /sparc64/boot-serial/sun4u: **
> > ERROR:/home/petmay01/linaro/qemu-for-merges/tests/boot-serial-test.c:137:check_guest_output:
> > assertion failed: (output_ok)
> > FAIL
> > GTester: last random seed: R02S99166ae475faeb3280608eeed6d61c4f
> > (pid=15216)
>
> This feels unrelated to the series, so possibly a non-deterministic
> failure
Looking at the test source code, it has a 60 second wait for the
emulator to print expected data on the serial port. My guess
would be that when running with a highly parallel make check
we're sometimes exceeding that 60 seconds. I don't see a
reason why my series would have affected this in a way that
only failed with sparc64 qtest, and none others.
>
> >
> > Test failure, 64-bit arm:
> >
> > ERROR:/home/pm215/qemu/tests/test-aio-multithread.c:365:test_multi_fair_mutex:
> > assertion failed (counter ==
> > atomic_counter): (59827 == 59828)
>
> I'm sure I've seen this non-deterministic failure before, unrelated to
> this series.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [Qemu-devel] [PULL 0/9] Socket next patches
2018-03-13 18:23 ` Daniel P. Berrangé
@ 2018-03-13 18:26 ` Peter Maydell
0 siblings, 0 replies; 17+ messages in thread
From: Peter Maydell @ 2018-03-13 18:26 UTC (permalink / raw)
To: Daniel P. Berrangé
Cc: Markus Armbruster, QEMU Developers, Gerd Hoffmann,
Marc-André Lureau, Paolo Bonzini
On 13 March 2018 at 18:23, Daniel P. Berrangé <berrange@redhat.com> wrote:
> On Tue, Mar 13, 2018 at 04:27:08PM +0000, Daniel P. Berrangé wrote:
>> This feels unrelated to the series, so possibly a non-deterministic
>> failure
>
> Looking at the test source code, it has a 60 second wait for the
> emulator to print expected data on the serial port. My guess
> would be that when running with a highly parallel make check
> we're sometimes exceeding that 60 seconds. I don't see a
> reason why my series would have affected this in a way that
> only failed with sparc64 qtest, and none others.
Sounds plausible. Feel free to resubmit the pullreq with the
actual bug fixed, for another spin of the intermittent-failure
roulette wheel :-)
-- PMM
^ permalink raw reply [flat|nested] 17+ messages in thread