From: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com> To: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@nxp.com>, "Rafael J . Wysocki" <rjw@rjwysocki.net>, Shawn Guo <shawnguo@kernel.org>, linux-pm@vger.kernel.org Subject: [PATCH 1/2] cpufreq: imx6q: check speed grades for i.MX6ULL Date: Wed, 18 Apr 2018 16:52:29 +0200 [thread overview] Message-ID: <20180418145230.10249-1-sebastien.szymanski@armadeus.com> (raw) Check the max speed supported from the fuses for i.MX6ULL and update the operating points table accordingly. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> --- drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 83cf631fc9bc..f094687cae52 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev) } #define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 static void imx6ul_opp_check_speed_grading(struct device *dev) { @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev) * Speed GRADING[1:0] defines the max speed of ARM: * 2b'00: Reserved; * 2b'01: 528000000Hz; - * 2b'10: 696000000Hz; - * 2b'11: Reserved; + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; + * 2b'11: 900000000Hz on i.MX6ULL only; * We need to set the max speed of ARM according to fuse map. */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) - if (dev_pm_opp_disable(dev, 696000000)) - dev_warn(dev, "failed to disable 696MHz OPP\n"); + + if (of_machine_is_compatible("fsl,imx6ul")) { + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + if (dev_pm_opp_disable(dev, 696000000)) + dev_warn(dev, "failed to disable 696MHz OPP\n"); + } + + if (of_machine_is_compatible("fsl,imx6ull")) { + if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) + if (dev_pm_opp_disable(dev, 792000000)) + dev_warn(dev, "failed to disable 792MHz OPP\n"); + + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) + if (dev_pm_opp_disable(dev, 900000000)) + dev_warn(dev, "failed to disable 900MHz OPP\n"); + } + iounmap(base); put_node: of_node_put(np); @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) goto put_reg; } - if (of_machine_is_compatible("fsl,imx6ul")) + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) imx6ul_opp_check_speed_grading(cpu_dev); else imx6q_opp_check_speed_grading(cpu_dev); -- 2.16.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: sebastien.szymanski@armadeus.com (Sébastien Szymanski) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] cpufreq: imx6q: check speed grades for i.MX6ULL Date: Wed, 18 Apr 2018 16:52:29 +0200 [thread overview] Message-ID: <20180418145230.10249-1-sebastien.szymanski@armadeus.com> (raw) Check the max speed supported from the fuses for i.MX6ULL and update the operating points table accordingly. Signed-off-by: S?bastien Szymanski <sebastien.szymanski@armadeus.com> --- drivers/cpufreq/imx6q-cpufreq.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 83cf631fc9bc..f094687cae52 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -266,6 +266,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev) } #define OCOTP_CFG3_6UL_SPEED_696MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_792MHZ 0x2 +#define OCOTP_CFG3_6ULL_SPEED_900MHZ 0x3 static void imx6ul_opp_check_speed_grading(struct device *dev) { @@ -287,16 +289,30 @@ static void imx6ul_opp_check_speed_grading(struct device *dev) * Speed GRADING[1:0] defines the max speed of ARM: * 2b'00: Reserved; * 2b'01: 528000000Hz; - * 2b'10: 696000000Hz; - * 2b'11: Reserved; + * 2b'10: 696000000Hz on i.MX6UL, 792000000Hz on i.MX6ULL; + * 2b'11: 900000000Hz on i.MX6ULL only; * We need to set the max speed of ARM according to fuse map. */ val = readl_relaxed(base + OCOTP_CFG3); val >>= OCOTP_CFG3_SPEED_SHIFT; val &= 0x3; - if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) - if (dev_pm_opp_disable(dev, 696000000)) - dev_warn(dev, "failed to disable 696MHz OPP\n"); + + if (of_machine_is_compatible("fsl,imx6ul")) { + if (val != OCOTP_CFG3_6UL_SPEED_696MHZ) + if (dev_pm_opp_disable(dev, 696000000)) + dev_warn(dev, "failed to disable 696MHz OPP\n"); + } + + if (of_machine_is_compatible("fsl,imx6ull")) { + if (val != OCOTP_CFG3_6ULL_SPEED_792MHZ) + if (dev_pm_opp_disable(dev, 792000000)) + dev_warn(dev, "failed to disable 792MHz OPP\n"); + + if (val != OCOTP_CFG3_6ULL_SPEED_900MHZ) + if (dev_pm_opp_disable(dev, 900000000)) + dev_warn(dev, "failed to disable 900MHz OPP\n"); + } + iounmap(base); put_node: of_node_put(np); @@ -356,7 +372,8 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) goto put_reg; } - if (of_machine_is_compatible("fsl,imx6ul")) + if (of_machine_is_compatible("fsl,imx6ul") || + of_machine_is_compatible("fsl,imx6ull")) imx6ul_opp_check_speed_grading(cpu_dev); else imx6q_opp_check_speed_grading(cpu_dev); -- 2.16.1
next reply other threads:[~2018-04-18 14:52 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-04-18 14:52 Sébastien Szymanski [this message] 2018-04-18 14:52 ` [PATCH 1/2] cpufreq: imx6q: check speed grades for i.MX6ULL Sébastien Szymanski 2018-04-18 14:52 ` [PATCH 2/2] ARM: dts: imx6ull: add operating points Sébastien Szymanski 2018-04-18 14:52 ` Sébastien Szymanski 2018-04-18 15:35 ` Stefan Agner 2018-04-18 15:35 ` Stefan Agner 2018-04-19 7:27 ` Sébastien Szymanski 2018-04-19 7:27 ` Sébastien Szymanski 2018-04-18 15:43 ` [PATCH 1/2] cpufreq: imx6q: check speed grades for i.MX6ULL Stefan Agner 2018-04-18 15:43 ` Stefan Agner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180418145230.10249-1-sebastien.szymanski@armadeus.com \ --to=sebastien.szymanski@armadeus.com \ --cc=fabio.estevam@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ --cc=rjw@rjwysocki.net \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.