All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mirela Simonovic <mirela.simonovic@aggios.com>
To: xen-devel@lists.xen.org
Cc: edgar.iglesias@xilinx.com, sstabellini@kernel.org,
	George Dunlap <george.dunlap@eu.citrix.com>,
	Dario Faggioli <dfaggioli@suse.com>,
	julien.grall@arm.com,
	Mirela Simonovic <mirela.simonovic@aggios.com>
Subject: [PATCH v2 06/10] xen/common: Restore IRQ affinity when hotplugging a pCPU
Date: Fri, 20 Apr 2018 14:25:09 +0200	[thread overview]
Message-ID: <20180420122513.27292-7-mirela.simonovic@aggios.com> (raw)
In-Reply-To: <20180420122513.27292-1-mirela.simonovic@aggios.com>

Non-boot pCPUs are being hot-unplugged during the system suspend to
RAM and hotplugged during the resume. When non-boot pCPUs are
hot-unplugged the interrupts that were targeted to them are migrated
to the boot pCPU.
On suspend, each guest could have its own wake-up devices/interrupts
(passthrough) that could trigger the system resume. These interrupts
could be targeted to a non-boot pCPU, e.g. if the guest's vCPU is
pinned to a non-boot pCPU. Due to the hot-unplug of non-boot pCPUs
during the suspend such interrupts will be migrated from non-boot pCPUs
to the boot pCPU (this is fine). However, when non-boot pCPUs are
hotplugged on resume, these interrupts are not migrated back to non-boot
pCPUs, i.e. IRQ affinity is not restored on resume (this is wrong).
This patch adds the restoration of IRQ affinity when a pCPU is hotplugged.

Signed-off-by: Mirela Simonovic <mirela.simonovic@aggios.com>

---
CC: George Dunlap <george.dunlap@eu.citrix.com>
CC: Dario Faggioli <dfaggioli@suse.com>
---
Changes in v2:
-Instead of checking whether the affinity was broken check whether
 vcpu's processor has changed in order to trigger restoring of the
 IRQ affinity
-Fix commit message
---
 xen/common/schedule.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/xen/common/schedule.c b/xen/common/schedule.c
index 343ab6306e..c37ef4846d 100644
--- a/xen/common/schedule.c
+++ b/xen/common/schedule.c
@@ -692,6 +692,7 @@ void restore_vcpu_affinity(struct domain *d)
     for_each_vcpu ( d, v )
     {
         spinlock_t *lock;
+        unsigned int old_cpu = v->processor;
 
         ASSERT(!vcpu_runnable(v));
 
@@ -724,6 +725,9 @@ void restore_vcpu_affinity(struct domain *d)
         lock = vcpu_schedule_lock_irq(v);
         v->processor = SCHED_OP(vcpu_scheduler(v), pick_cpu, v);
         spin_unlock_irq(lock);
+
+        if ( old_cpu != v->processor )
+            sched_move_irqs(v);
     }
 
     domain_update_node_affinity(d);
-- 
2.13.0


_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel

  parent reply	other threads:[~2018-04-20 12:25 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-20 12:25 [PATCH v2 00/10] xen/arm64: Suspend preconditions and CPU hotplug fixes Mirela Simonovic
2018-04-20 12:25 ` [PATCH v2 01/10] xen/arm64: Added handling of the trapped access to OSLSR register Mirela Simonovic
2018-04-23 11:13   ` Julien Grall
2018-04-20 12:25 ` [PATCH v2 02/10] xen/arm: Ignore write to GICD_ISACTIVERn registers (vgic-v2) Mirela Simonovic
2018-04-23 11:15   ` Julien Grall
2018-04-24 11:02     ` Mirela Simonovic
2018-04-24 16:12       ` Julien Grall
2018-04-24 16:45         ` Mirela Simonovic
2018-04-20 12:25 ` [PATCH v2 03/10] xen/arm: Implement CPU_OFF PSCI call (physical interface) Mirela Simonovic
2018-04-23 11:21   ` Julien Grall
2018-04-23 17:12     ` Mirela Simonovic
2018-04-23 17:15       ` Julien Grall
2018-04-20 12:25 ` [PATCH v2 04/10] xen/arm: Remove __initdata and __init to enable CPU hotplug Mirela Simonovic
2018-04-23 11:21   ` Julien Grall
2018-04-20 12:25 ` [PATCH v2 05/10] xen/arm: Setup virtual paging for non-boot CPUs on hotplug/resume Mirela Simonovic
2018-04-23 11:28   ` Julien Grall
2018-04-24 14:50     ` Mirela Simonovic
2018-04-24 16:33       ` Julien Grall
2018-04-25  8:23       ` Julien Grall
2018-04-20 12:25 ` Mirela Simonovic [this message]
2018-04-20 12:25 ` [PATCH v2 07/10] xen/arm: Release maintenance interrupt when CPU is hot-unplugged Mirela Simonovic
2018-04-23 11:33   ` Julien Grall
2018-04-25 13:09     ` Mirela Simonovic
2018-04-25 13:23       ` Julien Grall
2018-04-25 14:28         ` Mirela Simonovic
2018-04-26 10:08           ` Julien Grall
2018-04-26 14:23             ` Tim Deegan
2018-04-27  9:28               ` Julien Grall
2018-04-27 14:15                 ` Tim Deegan
2018-04-27 14:38                   ` Mirela Simonovic
2018-04-27 15:12                     ` Julien Grall
2018-05-09 10:10                       ` Mirela Simonovic
2018-05-09 11:01                         ` Julien Grall
2018-05-09 11:14                           ` Mirela Simonovic
2018-05-09 11:15                             ` Julien Grall
2018-04-20 12:25 ` [PATCH v2 08/10] xen/arm: Release timer interrupts " Mirela Simonovic
2018-04-25 10:34   ` Mirela Simonovic
2018-04-25 10:38     ` Julien Grall
2018-04-20 12:25 ` [PATCH v2 09/10] xen/arm: Free memory allocated for sibling/core maps on CPU hot-unplug Mirela Simonovic
2018-04-23 11:38   ` Julien Grall
2018-04-27 11:14     ` Mirela Simonovic
2018-04-20 12:25 ` [PATCH v2 10/10] xen/arm: Call check_local_cpu_errata for secondary CPU only on boot Mirela Simonovic
2018-04-23 11:46   ` Julien Grall
2018-04-25 15:13     ` Mirela Simonovic
2018-04-26 10:18       ` Julien Grall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180420122513.27292-7-mirela.simonovic@aggios.com \
    --to=mirela.simonovic@aggios.com \
    --cc=dfaggioli@suse.com \
    --cc=edgar.iglesias@xilinx.com \
    --cc=george.dunlap@eu.citrix.com \
    --cc=julien.grall@arm.com \
    --cc=sstabellini@kernel.org \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.