* [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro
@ 2018-05-23 11:48 Michael Ellerman
2018-05-23 11:48 ` [PATCH 2/2] powerpc/xmon: Realign paca dump fields Michael Ellerman
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Michael Ellerman @ 2018-05-23 11:48 UTC (permalink / raw)
To: linuxppc-dev; +Cc: malat
In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
printf format specifier. In most cases we're using either 'x' or 'lx'
etc. and that is OK. But for 'p' and other formats using '#' is
actually undefined, and once we enable printf() checking for
xmon_printf() we will get warnings from the compiler.
So just have each usage specify the full format, that way we can omit
'#' when it's inappropriate.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/xmon/xmon.c | 102 +++++++++++++++++++++++------------------------
1 file changed, 51 insertions(+), 51 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 064e70a59b47..a81aa3afd87e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2349,27 +2349,27 @@ static void dump_one_paca(int cpu)
printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
-#define DUMP(paca, name, format) \
- printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
+#define DUMP(paca, name, format) \
+ printf(" %-*s = "format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
offsetof(struct paca_struct, name));
- DUMP(p, lock_token, "x");
- DUMP(p, paca_index, "x");
- DUMP(p, kernel_toc, "llx");
- DUMP(p, kernelbase, "llx");
- DUMP(p, kernel_msr, "llx");
- DUMP(p, emergency_sp, "px");
+ DUMP(p, lock_token, "%#-*x");
+ DUMP(p, paca_index, "%#-*x");
+ DUMP(p, kernel_toc, "%#-*llx");
+ DUMP(p, kernelbase, "%#-*llx");
+ DUMP(p, kernel_msr, "%#-*llx");
+ DUMP(p, emergency_sp, "%-*px");
#ifdef CONFIG_PPC_BOOK3S_64
- DUMP(p, nmi_emergency_sp, "px");
- DUMP(p, mc_emergency_sp, "px");
- DUMP(p, in_nmi, "x");
- DUMP(p, in_mce, "x");
- DUMP(p, hmi_event_available, "x");
+ DUMP(p, nmi_emergency_sp, "%-*px");
+ DUMP(p, mc_emergency_sp, "%-*px");
+ DUMP(p, in_nmi, "%#-*x");
+ DUMP(p, in_mce, "%#-*x");
+ DUMP(p, hmi_event_available, "%#-*x");
#endif
- DUMP(p, data_offset, "llx");
- DUMP(p, hw_cpu_id, "x");
- DUMP(p, cpu_start, "x");
- DUMP(p, kexec_state, "x");
+ DUMP(p, data_offset, "%#-*llx");
+ DUMP(p, hw_cpu_id, "%#-*x");
+ DUMP(p, cpu_start, "%#-*x");
+ DUMP(p, kexec_state, "%#-*x");
#ifdef CONFIG_PPC_BOOK3S_64
for (i = 0; i < SLB_NUM_BOLTED; i++) {
u64 esid, vsid;
@@ -2385,54 +2385,54 @@ static void dump_one_paca(int cpu)
i, esid, vsid);
}
}
- DUMP(p, vmalloc_sllp, "x");
- DUMP(p, slb_cache_ptr, "x");
+ DUMP(p, vmalloc_sllp, "%#-*x");
+ DUMP(p, slb_cache_ptr, "%#-*x");
for (i = 0; i < SLB_CACHE_ENTRIES; i++)
printf(" slb_cache[%d]: = 0x%016x\n", i, p->slb_cache[i]);
- DUMP(p, rfi_flush_fallback_area, "px");
+ DUMP(p, rfi_flush_fallback_area, "%-*px");
#endif
- DUMP(p, dscr_default, "llx");
+ DUMP(p, dscr_default, "%#-*llx");
#ifdef CONFIG_PPC_BOOK3E
- DUMP(p, pgd, "px");
- DUMP(p, kernel_pgd, "px");
- DUMP(p, tcd_ptr, "px");
- DUMP(p, mc_kstack, "px");
- DUMP(p, crit_kstack, "px");
- DUMP(p, dbg_kstack, "px");
+ DUMP(p, pgd, "%-*px");
+ DUMP(p, kernel_pgd, "%-*px");
+ DUMP(p, tcd_ptr, "%-*px");
+ DUMP(p, mc_kstack, "%-*px");
+ DUMP(p, crit_kstack, "%-*px");
+ DUMP(p, dbg_kstack, "%-*px");
#endif
- DUMP(p, __current, "px");
- DUMP(p, kstack, "llx");
+ DUMP(p, __current, "%-*px");
+ DUMP(p, kstack, "%#-*llx");
printf(" kstack_base = 0x%016llx\n", p->kstack & ~(THREAD_SIZE - 1));
- DUMP(p, stab_rr, "llx");
- DUMP(p, saved_r1, "llx");
- DUMP(p, trap_save, "x");
- DUMP(p, irq_soft_mask, "x");
- DUMP(p, irq_happened, "x");
- DUMP(p, io_sync, "x");
- DUMP(p, irq_work_pending, "x");
- DUMP(p, nap_state_lost, "x");
- DUMP(p, sprg_vdso, "llx");
+ DUMP(p, stab_rr, "%#-*llx");
+ DUMP(p, saved_r1, "%#-*llx");
+ DUMP(p, trap_save, "%#-*x");
+ DUMP(p, irq_soft_mask, "%#-*x");
+ DUMP(p, irq_happened, "%#-*x");
+ DUMP(p, io_sync, "%#-*x");
+ DUMP(p, irq_work_pending, "%#-*x");
+ DUMP(p, nap_state_lost, "%#-*x");
+ DUMP(p, sprg_vdso, "%#-*llx");
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
- DUMP(p, tm_scratch, "llx");
+ DUMP(p, tm_scratch, "%#-*llx");
#endif
#ifdef CONFIG_PPC_POWERNV
- DUMP(p, core_idle_state_ptr, "px");
- DUMP(p, thread_idle_state, "x");
- DUMP(p, thread_mask, "x");
- DUMP(p, subcore_sibling_mask, "x");
+ DUMP(p, core_idle_state_ptr, "%-*px");
+ DUMP(p, thread_idle_state, "%#-*x");
+ DUMP(p, thread_mask, "%#-*x");
+ DUMP(p, subcore_sibling_mask, "%#-*x");
#endif
- DUMP(p, accounting.utime, "lx");
- DUMP(p, accounting.stime, "lx");
- DUMP(p, accounting.utime_scaled, "lx");
- DUMP(p, accounting.starttime, "lx");
- DUMP(p, accounting.starttime_user, "lx");
- DUMP(p, accounting.startspurr, "lx");
- DUMP(p, accounting.utime_sspurr, "lx");
- DUMP(p, accounting.steal_time, "lx");
+ DUMP(p, accounting.utime, "%#-*lx");
+ DUMP(p, accounting.stime, "%#-*lx");
+ DUMP(p, accounting.utime_scaled, "%#-*lx");
+ DUMP(p, accounting.starttime, "%#-*lx");
+ DUMP(p, accounting.starttime_user, "%#-*lx");
+ DUMP(p, accounting.startspurr, "%#-*lx");
+ DUMP(p, accounting.utime_sspurr, "%#-*lx");
+ DUMP(p, accounting.steal_time, "%#-*lx");
#undef DUMP
catch_memory_errors = 0;
--
2.14.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] powerpc/xmon: Realign paca dump fields
2018-05-23 11:48 [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Michael Ellerman
@ 2018-05-23 11:48 ` Michael Ellerman
2018-05-25 11:41 ` [2/2] " Michael Ellerman
2018-05-23 18:55 ` [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Mathieu Malaterre
2018-05-25 11:41 ` [1/2] " Michael Ellerman
2 siblings, 1 reply; 5+ messages in thread
From: Michael Ellerman @ 2018-05-23 11:48 UTC (permalink / raw)
To: linuxppc-dev; +Cc: malat
We've added some fields with longer names since we originally wrote
this, so the fields are no longer lined up. Adjust the widths to make
it all look nice again, eg:
0:mon> dp
paca for cpu 0x0 @ c000000001fa0000:
possible = yes
...
slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500
slb_shadow [1] = 0xd000000008000001 0x400d43642f000510
...
rfi_flush_fallback_area = c0000000fff80000 (0xcc8)
...
accounting.starttime_user = 0x51582f07 (0xae8)
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
arch/powerpc/xmon/xmon.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a81aa3afd87e..421c3a9aa734 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2345,12 +2345,12 @@ static void dump_one_paca(int cpu)
printf("paca for cpu 0x%x @ %px:\n", cpu, p);
- printf(" %-*s = %s\n", 20, "possible", cpu_possible(cpu) ? "yes" : "no");
- printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
- printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 25, "possible", cpu_possible(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 25, "present", cpu_present(cpu) ? "yes" : "no");
+ printf(" %-*s = %s\n", 25, "online", cpu_online(cpu) ? "yes" : "no");
#define DUMP(paca, name, format) \
- printf(" %-*s = "format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
+ printf(" %-*s = "format"\t(0x%lx)\n", 25, #name, 18, paca->name, \
offsetof(struct paca_struct, name));
DUMP(p, lock_token, "%#-*x");
@@ -2381,14 +2381,15 @@ static void dump_one_paca(int cpu)
vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid);
if (esid || vsid) {
- printf(" slb_shadow[%d]: = 0x%016llx 0x%016llx\n",
- i, esid, vsid);
+ printf(" %-*s[%d] = 0x%016llx 0x%016llx\n",
+ 22, "slb_shadow", i, esid, vsid);
}
}
DUMP(p, vmalloc_sllp, "%#-*x");
DUMP(p, slb_cache_ptr, "%#-*x");
for (i = 0; i < SLB_CACHE_ENTRIES; i++)
- printf(" slb_cache[%d]: = 0x%016x\n", i, p->slb_cache[i]);
+ printf(" %-*s[%d] = 0x%016x\n",
+ 22, "slb_cache", i, p->slb_cache[i]);
DUMP(p, rfi_flush_fallback_area, "%-*px");
#endif
@@ -2403,7 +2404,7 @@ static void dump_one_paca(int cpu)
#endif
DUMP(p, __current, "%-*px");
DUMP(p, kstack, "%#-*llx");
- printf(" kstack_base = 0x%016llx\n", p->kstack & ~(THREAD_SIZE - 1));
+ printf(" %-*s = 0x%016llx\n", 25, "kstack_base", p->kstack & ~(THREAD_SIZE - 1));
DUMP(p, stab_rr, "%#-*llx");
DUMP(p, saved_r1, "%#-*llx");
DUMP(p, trap_save, "%#-*x");
--
2.14.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro
2018-05-23 11:48 [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Michael Ellerman
2018-05-23 11:48 ` [PATCH 2/2] powerpc/xmon: Realign paca dump fields Michael Ellerman
@ 2018-05-23 18:55 ` Mathieu Malaterre
2018-05-25 11:41 ` [1/2] " Michael Ellerman
2 siblings, 0 replies; 5+ messages in thread
From: Mathieu Malaterre @ 2018-05-23 18:55 UTC (permalink / raw)
To: Michael Ellerman; +Cc: linuxppc-dev
On Wed, May 23, 2018 at 1:48 PM, Michael Ellerman <mpe@ellerman.id.au> wrote:
> In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
> printf format specifier. In most cases we're using either 'x' or 'lx'
> etc. and that is OK. But for 'p' and other formats using '#' is
> actually undefined, and once we enable printf() checking for
> xmon_printf() we will get warnings from the compiler.
Much more elegant, thanks.
All %#-* and %-* formatters are correct. The change to 22 is correct
since both SLB_NUM_BOLTED & SLB_CACHE_ENTRIES < 10.
For the series:
Reviewed-by: Mathieu Malaterre <malat@debian.org>
> So just have each usage specify the full format, that way we can omit
> '#' when it's inappropriate.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> ---
> arch/powerpc/xmon/xmon.c | 102 +++++++++++++++++++++++------------------------
> 1 file changed, 51 insertions(+), 51 deletions(-)
>
> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
> index 064e70a59b47..a81aa3afd87e 100644
> --- a/arch/powerpc/xmon/xmon.c
> +++ b/arch/powerpc/xmon/xmon.c
> @@ -2349,27 +2349,27 @@ static void dump_one_paca(int cpu)
> printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
> printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
>
> -#define DUMP(paca, name, format) \
> - printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
> +#define DUMP(paca, name, format) \
> + printf(" %-*s = "format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
> offsetof(struct paca_struct, name));
>
> - DUMP(p, lock_token, "x");
> - DUMP(p, paca_index, "x");
> - DUMP(p, kernel_toc, "llx");
> - DUMP(p, kernelbase, "llx");
> - DUMP(p, kernel_msr, "llx");
> - DUMP(p, emergency_sp, "px");
> + DUMP(p, lock_token, "%#-*x");
> + DUMP(p, paca_index, "%#-*x");
> + DUMP(p, kernel_toc, "%#-*llx");
> + DUMP(p, kernelbase, "%#-*llx");
> + DUMP(p, kernel_msr, "%#-*llx");
> + DUMP(p, emergency_sp, "%-*px");
> #ifdef CONFIG_PPC_BOOK3S_64
> - DUMP(p, nmi_emergency_sp, "px");
> - DUMP(p, mc_emergency_sp, "px");
> - DUMP(p, in_nmi, "x");
> - DUMP(p, in_mce, "x");
> - DUMP(p, hmi_event_available, "x");
> + DUMP(p, nmi_emergency_sp, "%-*px");
> + DUMP(p, mc_emergency_sp, "%-*px");
> + DUMP(p, in_nmi, "%#-*x");
> + DUMP(p, in_mce, "%#-*x");
> + DUMP(p, hmi_event_available, "%#-*x");
> #endif
> - DUMP(p, data_offset, "llx");
> - DUMP(p, hw_cpu_id, "x");
> - DUMP(p, cpu_start, "x");
> - DUMP(p, kexec_state, "x");
> + DUMP(p, data_offset, "%#-*llx");
> + DUMP(p, hw_cpu_id, "%#-*x");
> + DUMP(p, cpu_start, "%#-*x");
> + DUMP(p, kexec_state, "%#-*x");
> #ifdef CONFIG_PPC_BOOK3S_64
> for (i = 0; i < SLB_NUM_BOLTED; i++) {
> u64 esid, vsid;
> @@ -2385,54 +2385,54 @@ static void dump_one_paca(int cpu)
> i, esid, vsid);
> }
> }
> - DUMP(p, vmalloc_sllp, "x");
> - DUMP(p, slb_cache_ptr, "x");
> + DUMP(p, vmalloc_sllp, "%#-*x");
> + DUMP(p, slb_cache_ptr, "%#-*x");
> for (i = 0; i < SLB_CACHE_ENTRIES; i++)
> printf(" slb_cache[%d]: = 0x%016x\n", i, p->slb_cache[i]);
>
> - DUMP(p, rfi_flush_fallback_area, "px");
> + DUMP(p, rfi_flush_fallback_area, "%-*px");
> #endif
> - DUMP(p, dscr_default, "llx");
> + DUMP(p, dscr_default, "%#-*llx");
> #ifdef CONFIG_PPC_BOOK3E
> - DUMP(p, pgd, "px");
> - DUMP(p, kernel_pgd, "px");
> - DUMP(p, tcd_ptr, "px");
> - DUMP(p, mc_kstack, "px");
> - DUMP(p, crit_kstack, "px");
> - DUMP(p, dbg_kstack, "px");
> + DUMP(p, pgd, "%-*px");
> + DUMP(p, kernel_pgd, "%-*px");
> + DUMP(p, tcd_ptr, "%-*px");
> + DUMP(p, mc_kstack, "%-*px");
> + DUMP(p, crit_kstack, "%-*px");
> + DUMP(p, dbg_kstack, "%-*px");
> #endif
> - DUMP(p, __current, "px");
> - DUMP(p, kstack, "llx");
> + DUMP(p, __current, "%-*px");
> + DUMP(p, kstack, "%#-*llx");
> printf(" kstack_base = 0x%016llx\n", p->kstack & ~(THREAD_SIZE - 1));
> - DUMP(p, stab_rr, "llx");
> - DUMP(p, saved_r1, "llx");
> - DUMP(p, trap_save, "x");
> - DUMP(p, irq_soft_mask, "x");
> - DUMP(p, irq_happened, "x");
> - DUMP(p, io_sync, "x");
> - DUMP(p, irq_work_pending, "x");
> - DUMP(p, nap_state_lost, "x");
> - DUMP(p, sprg_vdso, "llx");
> + DUMP(p, stab_rr, "%#-*llx");
> + DUMP(p, saved_r1, "%#-*llx");
> + DUMP(p, trap_save, "%#-*x");
> + DUMP(p, irq_soft_mask, "%#-*x");
> + DUMP(p, irq_happened, "%#-*x");
> + DUMP(p, io_sync, "%#-*x");
> + DUMP(p, irq_work_pending, "%#-*x");
> + DUMP(p, nap_state_lost, "%#-*x");
> + DUMP(p, sprg_vdso, "%#-*llx");
>
> #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
> - DUMP(p, tm_scratch, "llx");
> + DUMP(p, tm_scratch, "%#-*llx");
> #endif
>
> #ifdef CONFIG_PPC_POWERNV
> - DUMP(p, core_idle_state_ptr, "px");
> - DUMP(p, thread_idle_state, "x");
> - DUMP(p, thread_mask, "x");
> - DUMP(p, subcore_sibling_mask, "x");
> + DUMP(p, core_idle_state_ptr, "%-*px");
> + DUMP(p, thread_idle_state, "%#-*x");
> + DUMP(p, thread_mask, "%#-*x");
> + DUMP(p, subcore_sibling_mask, "%#-*x");
> #endif
>
> - DUMP(p, accounting.utime, "lx");
> - DUMP(p, accounting.stime, "lx");
> - DUMP(p, accounting.utime_scaled, "lx");
> - DUMP(p, accounting.starttime, "lx");
> - DUMP(p, accounting.starttime_user, "lx");
> - DUMP(p, accounting.startspurr, "lx");
> - DUMP(p, accounting.utime_sspurr, "lx");
> - DUMP(p, accounting.steal_time, "lx");
> + DUMP(p, accounting.utime, "%#-*lx");
> + DUMP(p, accounting.stime, "%#-*lx");
> + DUMP(p, accounting.utime_scaled, "%#-*lx");
> + DUMP(p, accounting.starttime, "%#-*lx");
> + DUMP(p, accounting.starttime_user, "%#-*lx");
> + DUMP(p, accounting.startspurr, "%#-*lx");
> + DUMP(p, accounting.utime_sspurr, "%#-*lx");
> + DUMP(p, accounting.steal_time, "%#-*lx");
> #undef DUMP
>
> catch_memory_errors = 0;
> --
> 2.14.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [1/2] powerpc/xmon: Specify the full format in DUMP() macro
2018-05-23 11:48 [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Michael Ellerman
2018-05-23 11:48 ` [PATCH 2/2] powerpc/xmon: Realign paca dump fields Michael Ellerman
2018-05-23 18:55 ` [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Mathieu Malaterre
@ 2018-05-25 11:41 ` Michael Ellerman
2 siblings, 0 replies; 5+ messages in thread
From: Michael Ellerman @ 2018-05-25 11:41 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev; +Cc: malat
On Wed, 2018-05-23 at 11:48:36 UTC, Michael Ellerman wrote:
> In dump_one_paca() the DUMP macro unconditionally prepends '#' to the
> printf format specifier. In most cases we're using either 'x' or 'lx'
> etc. and that is OK. But for 'p' and other formats using '#' is
> actually undefined, and once we enable printf() checking for
> xmon_printf() we will get warnings from the compiler.
>
> So just have each usage specify the full format, that way we can omit
> '#' when it's inappropriate.
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
> Reviewed-by: Mathieu Malaterre <malat@debian.org>
Applied to powerpc next.
https://git.kernel.org/powerpc/c/6671683db8540e5766f44a1089549c
cheers
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [2/2] powerpc/xmon: Realign paca dump fields
2018-05-23 11:48 ` [PATCH 2/2] powerpc/xmon: Realign paca dump fields Michael Ellerman
@ 2018-05-25 11:41 ` Michael Ellerman
0 siblings, 0 replies; 5+ messages in thread
From: Michael Ellerman @ 2018-05-25 11:41 UTC (permalink / raw)
To: Michael Ellerman, linuxppc-dev; +Cc: malat
On Wed, 2018-05-23 at 11:48:37 UTC, Michael Ellerman wrote:
> We've added some fields with longer names since we originally wrote
> this, so the fields are no longer lined up. Adjust the widths to make
> it all look nice again, eg:
>
> 0:mon> dp
> paca for cpu 0x0 @ c000000001fa0000:
> possible = yes
> ...
> slb_shadow [0] = 0xc000000008000000 0x400ea1b217000500
> slb_shadow [1] = 0xd000000008000001 0x400d43642f000510
> ...
> rfi_flush_fallback_area = c0000000fff80000 (0xcc8)
> ...
> accounting.starttime_user = 0x51582f07 (0xae8)
>
> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Applied to powerpc next.
https://git.kernel.org/powerpc/c/9ce53e27265e7bab728774fac785f6
cheers
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-05-25 11:41 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-23 11:48 [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Michael Ellerman
2018-05-23 11:48 ` [PATCH 2/2] powerpc/xmon: Realign paca dump fields Michael Ellerman
2018-05-25 11:41 ` [2/2] " Michael Ellerman
2018-05-23 18:55 ` [PATCH 1/2] powerpc/xmon: Specify the full format in DUMP() macro Mathieu Malaterre
2018-05-25 11:41 ` [1/2] " Michael Ellerman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.