All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Sricharan R <sricharan@codeaurora.org>
Cc: robh@kernel.org, viresh.kumar@linaro.org, mark.rutland@arm.com,
	mturquette@baylibre.com, sboyd@codeaurora.org,
	linux@armlinux.org.uk, andy.gross@linaro.org,
	david.brown@linaro.org, rjw@rjwysocki.net,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	linux-pm@vger.kernel.org, linux@arm.linux.org.uk
Subject: Re: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
Date: Thu, 24 May 2018 10:39:26 -0700	[thread overview]
Message-ID: <20180524173926.GC14924@minitux> (raw)
In-Reply-To: <1520347148-27852-2-git-send-email-sricharan@codeaurora.org>

On Tue 06 Mar 06:38 PST 2018, Sricharan R wrote:

> From: Stephen Boyd <sboyd@codeaurora.org>
> 
> Krait CPUs have a handful of L2 cache controller registers that
> live behind a cp15 based indirection register. First you program
> the indirection register (l2cpselr) to point the L2 'window'
> register (l2cpdr) at what you want to read/write.  Then you
> read/write the 'window' register to do what you want. The
> l2cpselr register is not banked per-cpu so we must lock around
> accesses to it to prevent other CPUs from re-pointing l2cpdr
> underneath us.
> 
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This should have your signed-off-by here as well.

Apart from that:

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm/common/Kconfig                   |  3 ++
>  arch/arm/common/Makefile                  |  1 +
>  arch/arm/common/krait-l2-accessors.c      | 48 +++++++++++++++++++++++++++++++
>  arch/arm/include/asm/krait-l2-accessors.h | 10 +++++++
>  4 files changed, 62 insertions(+)
>  create mode 100644 arch/arm/common/krait-l2-accessors.c
>  create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
> 
> diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
> index e5ad070..c8e1986 100644
> --- a/arch/arm/common/Kconfig
> +++ b/arch/arm/common/Kconfig
> @@ -7,6 +7,9 @@ config DMABOUNCE
>  	bool
>  	select ZONE_DMA
>  
> +config KRAIT_L2_ACCESSORS
> +	bool
> +
>  config SHARP_LOCOMO
>  	bool
>  
> diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
> index 70b4a14..eec6cd1 100644
> --- a/arch/arm/common/Makefile
> +++ b/arch/arm/common/Makefile
> @@ -7,6 +7,7 @@ obj-y				+= firmware.o
>  
>  obj-$(CONFIG_SA1111)		+= sa1111.o
>  obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
> +obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
>  obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
>  obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
>  obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
> diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
> new file mode 100644
> index 0000000..9a97dda
> --- /dev/null
> +++ b/arch/arm/common/krait-l2-accessors.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include <linux/spinlock.h>
> +#include <linux/export.h>
> +
> +#include <asm/barrier.h>
> +#include <asm/krait-l2-accessors.h>
> +
> +static DEFINE_RAW_SPINLOCK(krait_l2_lock);
> +
> +void krait_set_l2_indirect_reg(u32 addr, u32 val)
> +{
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&krait_l2_lock, flags);
> +	/*
> +	 * Select the L2 window by poking l2cpselr, then write to the window
> +	 * via l2cpdr.
> +	 */
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
> +	isb();
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
> +	isb();
> +
> +	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
> +}
> +EXPORT_SYMBOL(krait_set_l2_indirect_reg);
> +
> +u32 krait_get_l2_indirect_reg(u32 addr)
> +{
> +	u32 val;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&krait_l2_lock, flags);
> +	/*
> +	 * Select the L2 window by poking l2cpselr, then read from the window
> +	 * via l2cpdr.
> +	 */
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
> +	isb();
> +	asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
> +
> +	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
> +
> +	return val;
> +}
> +EXPORT_SYMBOL(krait_get_l2_indirect_reg);
> diff --git a/arch/arm/include/asm/krait-l2-accessors.h b/arch/arm/include/asm/krait-l2-accessors.h
> new file mode 100644
> index 0000000..dd7c474
> --- /dev/null
> +++ b/arch/arm/include/asm/krait-l2-accessors.h
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
> +#define __ASMARM_KRAIT_L2_ACCESSORS_H
> +
> +extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
> +extern u32 krait_get_l2_indirect_reg(u32 addr);
> +
> +#endif
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 

WARNING: multiple messages have this Message-ID (diff)
From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions
Date: Thu, 24 May 2018 10:39:26 -0700	[thread overview]
Message-ID: <20180524173926.GC14924@minitux> (raw)
In-Reply-To: <1520347148-27852-2-git-send-email-sricharan@codeaurora.org>

On Tue 06 Mar 06:38 PST 2018, Sricharan R wrote:

> From: Stephen Boyd <sboyd@codeaurora.org>
> 
> Krait CPUs have a handful of L2 cache controller registers that
> live behind a cp15 based indirection register. First you program
> the indirection register (l2cpselr) to point the L2 'window'
> register (l2cpdr) at what you want to read/write.  Then you
> read/write the 'window' register to do what you want. The
> l2cpselr register is not banked per-cpu so we must lock around
> accesses to it to prevent other CPUs from re-pointing l2cpdr
> underneath us.
> 
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Russell King <linux@arm.linux.org.uk>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This should have your signed-off-by here as well.

Apart from that:

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  arch/arm/common/Kconfig                   |  3 ++
>  arch/arm/common/Makefile                  |  1 +
>  arch/arm/common/krait-l2-accessors.c      | 48 +++++++++++++++++++++++++++++++
>  arch/arm/include/asm/krait-l2-accessors.h | 10 +++++++
>  4 files changed, 62 insertions(+)
>  create mode 100644 arch/arm/common/krait-l2-accessors.c
>  create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
> 
> diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
> index e5ad070..c8e1986 100644
> --- a/arch/arm/common/Kconfig
> +++ b/arch/arm/common/Kconfig
> @@ -7,6 +7,9 @@ config DMABOUNCE
>  	bool
>  	select ZONE_DMA
>  
> +config KRAIT_L2_ACCESSORS
> +	bool
> +
>  config SHARP_LOCOMO
>  	bool
>  
> diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
> index 70b4a14..eec6cd1 100644
> --- a/arch/arm/common/Makefile
> +++ b/arch/arm/common/Makefile
> @@ -7,6 +7,7 @@ obj-y				+= firmware.o
>  
>  obj-$(CONFIG_SA1111)		+= sa1111.o
>  obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
> +obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
>  obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
>  obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
>  obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
> diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
> new file mode 100644
> index 0000000..9a97dda
> --- /dev/null
> +++ b/arch/arm/common/krait-l2-accessors.c
> @@ -0,0 +1,48 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#include <linux/spinlock.h>
> +#include <linux/export.h>
> +
> +#include <asm/barrier.h>
> +#include <asm/krait-l2-accessors.h>
> +
> +static DEFINE_RAW_SPINLOCK(krait_l2_lock);
> +
> +void krait_set_l2_indirect_reg(u32 addr, u32 val)
> +{
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&krait_l2_lock, flags);
> +	/*
> +	 * Select the L2 window by poking l2cpselr, then write to the window
> +	 * via l2cpdr.
> +	 */
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
> +	isb();
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
> +	isb();
> +
> +	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
> +}
> +EXPORT_SYMBOL(krait_set_l2_indirect_reg);
> +
> +u32 krait_get_l2_indirect_reg(u32 addr)
> +{
> +	u32 val;
> +	unsigned long flags;
> +
> +	raw_spin_lock_irqsave(&krait_l2_lock, flags);
> +	/*
> +	 * Select the L2 window by poking l2cpselr, then read from the window
> +	 * via l2cpdr.
> +	 */
> +	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
> +	isb();
> +	asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
> +
> +	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
> +
> +	return val;
> +}
> +EXPORT_SYMBOL(krait_get_l2_indirect_reg);
> diff --git a/arch/arm/include/asm/krait-l2-accessors.h b/arch/arm/include/asm/krait-l2-accessors.h
> new file mode 100644
> index 0000000..dd7c474
> --- /dev/null
> +++ b/arch/arm/include/asm/krait-l2-accessors.h
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> +
> +#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
> +#define __ASMARM_KRAIT_L2_ACCESSORS_H
> +
> +extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
> +extern u32 krait_get_l2_indirect_reg(u32 addr);
> +
> +#endif
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 

  reply	other threads:[~2018-05-24 17:39 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-06 14:38 [PATCH v9 00/15] Krait clocks + Krait CPUfreq Sricharan R
2018-03-06 14:38 ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 01/15] ARM: Add Krait L2 register accessor functions Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-05-24 17:39   ` Bjorn Andersson [this message]
2018-05-24 17:39     ` Bjorn Andersson
2018-05-25  5:40     ` Sricharan R
2018-05-25  5:40       ` Sricharan R
2018-05-30 15:55       ` Stephen Boyd
2018-05-30 15:55         ` Stephen Boyd
2018-05-30 15:55         ` Stephen Boyd
2018-05-31  4:57         ` Sricharan R
2018-05-31  4:57           ` Sricharan R
2018-05-31  7:41           ` Stephen Boyd
2018-05-31  7:41             ` Stephen Boyd
2018-05-31  7:41             ` Stephen Boyd
2018-06-01 13:20             ` Sricharan R
2018-06-01 13:20               ` Sricharan R
2018-06-01 17:12               ` Stephen Boyd
2018-06-01 17:12                 ` Stephen Boyd
2018-06-01 17:12                 ` Stephen Boyd
2018-03-06 14:38 ` [PATCH v9 02/15] clk: mux: Split out register accessors for reuse Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-05-24 16:50   ` Bjorn Andersson
2018-05-24 16:50     ` Bjorn Andersson
2018-05-25  5:38     ` Sricharan R
2018-05-25  5:38       ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 03/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 04/15] clk: qcom: Add HFPLL driver Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 05/15] dt-bindings: clock: Document qcom,hfpll Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-03-06 14:38 ` [PATCH v9 06/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Sricharan R
2018-03-06 14:38   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 07/15] clk: qcom: Add IPQ806X's HFPLLs Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 08/15] clk: qcom: Add support for Krait clocks Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 09/15] clk: qcom: Add KPSS ACC/GCC driver Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 10/15] dt-bindings: arm: Document qcom,kpss-gcc Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 11/15] clk: qcom: Add Krait clock controller driver Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 12/15] dt-bindings: clock: Document qcom,krait-cc Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 13/15] clk: qcom: Add safe switch hook for krait mux clocks Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-06 14:39 ` [PATCH v9 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Sricharan R
2018-03-06 14:39   ` Sricharan R
2018-03-07  5:09   ` Viresh Kumar
2018-03-07  5:09     ` Viresh Kumar
2018-03-06 14:39 ` [PATCH v9 15/15] dt-bindings: cpufreq: Document operating-points-v2-krait-cpu Sricharan R
2018-03-06 14:39   ` Sricharan R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180524173926.GC14924@minitux \
    --to=bjorn.andersson@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=sricharan@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.