From: Christoph Hellwig <hch@lst.de> To: Ralf Baechle <ralf@linux-mips.org>, James Hogan <jhogan@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Huacai Chen <chenhc@lemote.com>, Jiaxun Yang <jiaxun.yang@flygoat.com>, David Daney <david.daney@cavium.com>, Tom Bogendoerfer <tsbogend@alpha.franken.de>, linux-mips@linux-mips.org, iommu@lists.linux-foundation.org Subject: [PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O Date: Fri, 25 May 2018 11:21:00 +0200 [thread overview] Message-ID: <20180525092111.18516-15-hch@lst.de> (raw) In-Reply-To: <20180525092111.18516-1-hch@lst.de> Switch the simple cache coherent architectures that don't require any DMA address translation to dma_direct_ops. We'll soon use at least parts of the direct DMA ops implementation for all platforms, so select the symbol globally. Signed-off-by: Christoph Hellwig <hch@lst.de> --- arch/mips/Kconfig | 15 +-------------- arch/mips/include/asm/dma-mapping.h | 2 +- 2 files changed, 2 insertions(+), 15 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24cc20ea60b9..173e5714151c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -16,6 +16,7 @@ config MIPS select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select CPU_PM if CPU_IDLE + select DMA_DIRECT_OPS select GENERIC_ATOMIC64 if !64BIT select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE @@ -563,7 +564,6 @@ config NEC_MARKEINS bool "NEC EMMA2RH Mark-eins board" select SOC_EMMA2RH select HW_HAS_PCI - select MIPS_DMA_DEFAULT help This enables support for the NEC Electronics Mark-eins boards. @@ -577,14 +577,12 @@ config MACH_VR41XX config NXP_STB220 bool "NXP STB220 board" - select MIPS_DMA_DEFAULT select SOC_PNX833X help Support for NXP Semiconductors STB220 Development Board. config NXP_STB225 bool "NXP 225 board" - select MIPS_DMA_DEFAULT select SOC_PNX833X select SOC_PNX8335 help @@ -762,7 +760,6 @@ config SGI_IP32 config SIBYTE_CRHINE bool "Sibyte BCM91120C-CRhine" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -772,7 +769,6 @@ config SIBYTE_CRHINE config SIBYTE_CARMEL bool "Sibyte BCM91120x-Carmel" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -782,7 +778,6 @@ config SIBYTE_CARMEL config SIBYTE_CRHONE bool "Sibyte BCM91125C-CRhone" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1125 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -793,7 +788,6 @@ config SIBYTE_CRHONE config SIBYTE_RHONE bool "Sibyte BCM91125E-Rhone" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1125H select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -804,7 +798,6 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select HAVE_PATA_PLATFORM - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -817,7 +810,6 @@ config SIBYTE_LITTLESUR bool "Sibyte BCM91250C2-LittleSur" select BOOT_ELF32 select HAVE_PATA_PLATFORM - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -828,7 +820,6 @@ config SIBYTE_LITTLESUR config SIBYTE_SENTOSA bool "Sibyte BCM91250E-Sentosa" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -838,7 +829,6 @@ config SIBYTE_SENTOSA config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select NR_CPUS_DEFAULT_4 select SIBYTE_BCM1x80 select SWAP_IO_SPACE @@ -959,7 +949,6 @@ config NLM_XLR_BOARD select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP select HW_HAS_PCI - select MIPS_DMA_DEFAULT select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -986,7 +975,6 @@ config NLM_XLP_BOARD select SYS_HAS_CPU_XLP select SYS_SUPPORTS_SMP select HW_HAS_PCI - select MIPS_DMA_DEFAULT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select PHYS_ADDR_T_64BIT @@ -1012,7 +1000,6 @@ config MIPS_PARAVIRT bool "Para-Virtualized guest system" select CEVT_R4K select CSRC_R4K - select MIPS_DMA_DEFAULT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index eaf3d9054104..7c0d4f0ccaa0 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -20,7 +20,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) #elif defined(CONFIG_MIPS_DMA_DEFAULT) return &mips_default_dma_map_ops; #else - return NULL; + return &dma_direct_ops; #endif } -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org> To: Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>, James Hogan <jhogan-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org, Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>, Kevin Cernekee <cernekee-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Jiaxun Yang <jiaxun.yang-nEvAom26CKtBDgjK7y7TUQ@public.gmane.org>, iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org, Tom Bogendoerfer <tsbogend-I1c7kopa9pxLokYuJOExCg@public.gmane.org>, Huacai Chen <chenhc-h23VmSynlr/QT0dZR+AlfA@public.gmane.org> Subject: [PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O Date: Fri, 25 May 2018 11:21:00 +0200 [thread overview] Message-ID: <20180525092111.18516-15-hch@lst.de> (raw) In-Reply-To: <20180525092111.18516-1-hch-jcswGhMUV9g@public.gmane.org> Switch the simple cache coherent architectures that don't require any DMA address translation to dma_direct_ops. We'll soon use at least parts of the direct DMA ops implementation for all platforms, so select the symbol globally. Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org> --- arch/mips/Kconfig | 15 +-------------- arch/mips/include/asm/dma-mapping.h | 2 +- 2 files changed, 2 insertions(+), 15 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24cc20ea60b9..173e5714151c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -16,6 +16,7 @@ config MIPS select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select CPU_PM if CPU_IDLE + select DMA_DIRECT_OPS select GENERIC_ATOMIC64 if !64BIT select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE @@ -563,7 +564,6 @@ config NEC_MARKEINS bool "NEC EMMA2RH Mark-eins board" select SOC_EMMA2RH select HW_HAS_PCI - select MIPS_DMA_DEFAULT help This enables support for the NEC Electronics Mark-eins boards. @@ -577,14 +577,12 @@ config MACH_VR41XX config NXP_STB220 bool "NXP STB220 board" - select MIPS_DMA_DEFAULT select SOC_PNX833X help Support for NXP Semiconductors STB220 Development Board. config NXP_STB225 bool "NXP 225 board" - select MIPS_DMA_DEFAULT select SOC_PNX833X select SOC_PNX8335 help @@ -762,7 +760,6 @@ config SGI_IP32 config SIBYTE_CRHINE bool "Sibyte BCM91120C-CRhine" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -772,7 +769,6 @@ config SIBYTE_CRHINE config SIBYTE_CARMEL bool "Sibyte BCM91120x-Carmel" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1120 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -782,7 +778,6 @@ config SIBYTE_CARMEL config SIBYTE_CRHONE bool "Sibyte BCM91125C-CRhone" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1125 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -793,7 +788,6 @@ config SIBYTE_CRHONE config SIBYTE_RHONE bool "Sibyte BCM91125E-Rhone" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_BCM1125H select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -804,7 +798,6 @@ config SIBYTE_SWARM bool "Sibyte BCM91250A-SWARM" select BOOT_ELF32 select HAVE_PATA_PLATFORM - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -817,7 +810,6 @@ config SIBYTE_LITTLESUR bool "Sibyte BCM91250C2-LittleSur" select BOOT_ELF32 select HAVE_PATA_PLATFORM - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -828,7 +820,6 @@ config SIBYTE_LITTLESUR config SIBYTE_SENTOSA bool "Sibyte BCM91250E-Sentosa" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select SIBYTE_SB1250 select SWAP_IO_SPACE select SYS_HAS_CPU_SB1 @@ -838,7 +829,6 @@ config SIBYTE_SENTOSA config SIBYTE_BIGSUR bool "Sibyte BCM91480B-BigSur" select BOOT_ELF32 - select MIPS_DMA_DEFAULT select NR_CPUS_DEFAULT_4 select SIBYTE_BCM1x80 select SWAP_IO_SPACE @@ -959,7 +949,6 @@ config NLM_XLR_BOARD select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP select HW_HAS_PCI - select MIPS_DMA_DEFAULT select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -986,7 +975,6 @@ config NLM_XLP_BOARD select SYS_HAS_CPU_XLP select SYS_SUPPORTS_SMP select HW_HAS_PCI - select MIPS_DMA_DEFAULT select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select PHYS_ADDR_T_64BIT @@ -1012,7 +1000,6 @@ config MIPS_PARAVIRT bool "Para-Virtualized guest system" select CEVT_R4K select CSRC_R4K - select MIPS_DMA_DEFAULT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index eaf3d9054104..7c0d4f0ccaa0 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -20,7 +20,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) #elif defined(CONFIG_MIPS_DMA_DEFAULT) return &mips_default_dma_map_ops; #else - return NULL; + return &dma_direct_ops; #endif } -- 2.17.0
next prev parent reply other threads:[~2018-05-25 9:25 UTC|newest] Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-25 9:20 [RFC] switch mips to use the generic dma map ops Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 01/25] MIPS: remove a dead ifdef from mach-ath25/dma-coherence.h Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 02/25] MIPS: simplify CONFIG_DMA_NONCOHERENT ifdefs Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 03/25] MIPS: remove CONFIG_DMA_COHERENT Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 04/25] MIPS: Octeon: unexport __phys_to_dma and __dma_to_phys Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 05/25] MIPS: Octeon: refactor swiotlb code Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-30 23:25 ` Paul Burton 2018-05-30 23:25 ` Paul Burton 2018-05-30 23:25 ` Paul Burton 2018-05-31 16:38 ` Christoph Hellwig 2018-05-31 16:38 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 06/25] MIPS: loongson: remove loongson_dma_supported Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-31 23:12 ` Paul Burton 2018-05-31 23:12 ` Paul Burton 2018-05-31 23:12 ` Paul Burton 2018-05-25 9:20 ` [PATCH 07/25] MIPS: consolidate the swiotlb implementations Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 08/25] MIPS: remove the mips_dma_map_ops indirection Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 09/25] MIPS: make the default mips dma implementation optional Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 10/25] MIPS: Octeon: remove mips dma-default stubs Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 11/25] MIPS: Octeon: move swiotlb declarations out of dma-coherence.h Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:20 ` [PATCH 12/25] MIPS: loongson: untangle dma implementations Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-07-11 12:46 ` Maciej W. Rozycki 2018-07-11 12:46 ` Maciej W. Rozycki 2018-07-11 12:46 ` Maciej W. Rozycki 2018-07-11 12:57 ` Christoph Hellwig 2018-07-11 12:57 ` Christoph Hellwig 2018-07-11 13:21 ` Maciej W. Rozycki 2018-07-11 13:21 ` Maciej W. Rozycki 2018-07-11 13:21 ` Maciej W. Rozycki 2018-05-25 9:20 ` [PATCH 13/25] MIPS: loongson: remove loongson-3 handling from dma-coherence.h Christoph Hellwig 2018-05-25 9:20 ` Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig [this message] 2018-05-25 9:21 ` [PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O Christoph Hellwig 2018-05-25 9:21 ` [PATCH 15/25] MIPS: IP27: use dma_direct_ops Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 16/25] MIPS: move coherentio setup to setup.c Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 17/25] MIPS: use generic dma noncoherent ops for simple noncoherent platforms Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 19/25] MIPS: IP32: " Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 20/25] MIPS: ath25: " Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 21/25] MIPS: jazz: split dma mapping operations from dma-default Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 22/25] dma-noncoherent: add a arch_sync_dma_for_cpu_all hook Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 23/25] MIPS: bmips: use generic dma noncoherent ops Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 24/25] MIPS: remove the old dma-default implementation Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-05-25 9:21 ` [PATCH 25/25] MIPS: remove unneeded includes from dma-mapping.h Christoph Hellwig 2018-05-25 9:21 ` Christoph Hellwig 2018-06-15 11:08 switch mips to use the generic dma map ops v2 Christoph Hellwig 2018-06-15 11:08 ` [PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O Christoph Hellwig 2018-06-15 11:08 ` Christoph Hellwig
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180525092111.18516-15-hch@lst.de \ --to=hch@lst.de \ --cc=cernekee@gmail.com \ --cc=chenhc@lemote.com \ --cc=david.daney@cavium.com \ --cc=f.fainelli@gmail.com \ --cc=iommu@lists.linux-foundation.org \ --cc=jhogan@kernel.org \ --cc=jiaxun.yang@flygoat.com \ --cc=linux-mips@linux-mips.org \ --cc=ralf@linux-mips.org \ --cc=tsbogend@alpha.franken.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.