* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
This is the promised rework of the at91 PMC clocks driver. It is mainly
necessary to remove the DTC warnings but it also complies with the CCF
rule that there should be one node per controller instead of one node
per clock.
This only handles the PMC, I'm planning to also rework the SCKC bindings
later (without breaking the DT ABI).
The series is based on top of clk-next plus at91-dt so I don't think it
is convenient to have it this cycle. However, I would really like to
ensure we agree on the new bindings this cycle before converting all the
other platforms as this is a bit tedious.
The first two patches are actually fixes and may be considered for this
cycle.
One nice note:
at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
drivers/clk/at91/built-in.o changes that way:
text data bss dec hex
34792 24 732 35548 8adc before
39438 32 741 40211 9d13 after
28300 32 741 29073 7191 without dt-compat
Alexandre Belloni (16):
clk: at91: audio-pll: fix audio pmc type
clk: at91: generated: SSCs don't have a gclk
clk: at91: h32mx: separate registration from DT parsing
clk: at91: audio-pll: separate registration from DT parsing
clk: at91: generated: set audio_pll_allowed in
at91_clk_register_generated()
clk: at91: allow clock registration from C code
clk: at91: add pmc_data struct and helpers
dt-bindings: clk: at91: Document new PMC binding
clk: at91: add new DT lookup function
clk: at91: add sama5d4 pmc driver
clk: at91: add sama5d2 PMC driver
clk: at91: add at91sam9x5 PMCs driver
clk: at91: move DT compatibility code to its own file
ARM: dts: at91: sama5d4: switch to new clock bindings
ARM: dts: at91: sama5d2: switch to new binding
ARM: dts: at91: at91sam9x5: switch to new clock bindings
.../devicetree/bindings/clock/at91-clock.txt | 523 +---------
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +-----
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 +-----------
arch/arm/boot/dts/sama5d4.dtsi | 535 +---------
drivers/clk/at91/Makefile | 5 +-
drivers/clk/at91/at91sam9x5.c | 302 ++++++
drivers/clk/at91/clk-audio-pll.c | 107 +-
drivers/clk/at91/clk-generated.c | 81 +-
drivers/clk/at91/clk-h32mx.c | 22 +-
drivers/clk/at91/clk-i2s-mux.c | 40 +-
drivers/clk/at91/clk-main.c | 112 +-
drivers/clk/at91/clk-master.c | 99 +-
drivers/clk/at91/clk-peripheral.c | 81 +-
drivers/clk/at91/clk-pll.c | 187 +---
drivers/clk/at91/clk-plldiv.c | 27 +-
drivers/clk/at91/clk-programmable.c | 81 +-
drivers/clk/at91/clk-slow.c | 32 +-
drivers/clk/at91/clk-smd.c | 34 +-
drivers/clk/at91/clk-system.c | 39 +-
drivers/clk/at91/clk-usb.c | 94 +-
drivers/clk/at91/clk-utmi.c | 45 +-
drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++
drivers/clk/at91/pmc.c | 78 ++
drivers/clk/at91/pmc.h | 157 +++
drivers/clk/at91/sama5d2.c | 333 ++++++
drivers/clk/at91/sama5d4.c | 262 +++++
include/dt-bindings/clock/at91.h | 14 +
43 files changed, 2398 insertions(+), 2946 deletions(-)
create mode 100644 drivers/clk/at91/at91sam9x5.c
create mode 100644 drivers/clk/at91/dt-compat.c
create mode 100644 drivers/clk/at91/sama5d2.c
create mode 100644 drivers/clk/at91/sama5d4.c
--
2.18.0
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: devicetree, Alexandre Belloni, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
This is the promised rework of the at91 PMC clocks driver. It is mainly
necessary to remove the DTC warnings but it also complies with the CCF
rule that there should be one node per controller instead of one node
per clock.
This only handles the PMC, I'm planning to also rework the SCKC bindings
later (without breaking the DT ABI).
The series is based on top of clk-next plus at91-dt so I don't think it
is convenient to have it this cycle. However, I would really like to
ensure we agree on the new bindings this cycle before converting all the
other platforms as this is a bit tedious.
The first two patches are actually fixes and may be considered for this
cycle.
One nice note:
at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
drivers/clk/at91/built-in.o changes that way:
text data bss dec hex
34792 24 732 35548 8adc before
39438 32 741 40211 9d13 after
28300 32 741 29073 7191 without dt-compat
Alexandre Belloni (16):
clk: at91: audio-pll: fix audio pmc type
clk: at91: generated: SSCs don't have a gclk
clk: at91: h32mx: separate registration from DT parsing
clk: at91: audio-pll: separate registration from DT parsing
clk: at91: generated: set audio_pll_allowed in
at91_clk_register_generated()
clk: at91: allow clock registration from C code
clk: at91: add pmc_data struct and helpers
dt-bindings: clk: at91: Document new PMC binding
clk: at91: add new DT lookup function
clk: at91: add sama5d4 pmc driver
clk: at91: add sama5d2 PMC driver
clk: at91: add at91sam9x5 PMCs driver
clk: at91: move DT compatibility code to its own file
ARM: dts: at91: sama5d4: switch to new clock bindings
ARM: dts: at91: sama5d2: switch to new binding
ARM: dts: at91: at91sam9x5: switch to new clock bindings
.../devicetree/bindings/clock/at91-clock.txt | 523 +---------
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +-----
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 +-----------
arch/arm/boot/dts/sama5d4.dtsi | 535 +---------
drivers/clk/at91/Makefile | 5 +-
drivers/clk/at91/at91sam9x5.c | 302 ++++++
drivers/clk/at91/clk-audio-pll.c | 107 +-
drivers/clk/at91/clk-generated.c | 81 +-
drivers/clk/at91/clk-h32mx.c | 22 +-
drivers/clk/at91/clk-i2s-mux.c | 40 +-
drivers/clk/at91/clk-main.c | 112 +-
drivers/clk/at91/clk-master.c | 99 +-
drivers/clk/at91/clk-peripheral.c | 81 +-
drivers/clk/at91/clk-pll.c | 187 +---
drivers/clk/at91/clk-plldiv.c | 27 +-
drivers/clk/at91/clk-programmable.c | 81 +-
drivers/clk/at91/clk-slow.c | 32 +-
drivers/clk/at91/clk-smd.c | 34 +-
drivers/clk/at91/clk-system.c | 39 +-
drivers/clk/at91/clk-usb.c | 94 +-
drivers/clk/at91/clk-utmi.c | 45 +-
drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++
drivers/clk/at91/pmc.c | 78 ++
drivers/clk/at91/pmc.h | 157 +++
drivers/clk/at91/sama5d2.c | 333 ++++++
drivers/clk/at91/sama5d4.c | 262 +++++
include/dt-bindings/clock/at91.h | 14 +
43 files changed, 2398 insertions(+), 2946 deletions(-)
create mode 100644 drivers/clk/at91/at91sam9x5.c
create mode 100644 drivers/clk/at91/dt-compat.c
create mode 100644 drivers/clk/at91/sama5d2.c
create mode 100644 drivers/clk/at91/sama5d4.c
--
2.18.0
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
This is the promised rework of the at91 PMC clocks driver. It is mainly
necessary to remove the DTC warnings but it also complies with the CCF
rule that there should be one node per controller instead of one node
per clock.
This only handles the PMC, I'm planning to also rework the SCKC bindings
later (without breaking the DT ABI).
The series is based on top of clk-next plus at91-dt so I don't think it
is convenient to have it this cycle. However, I would really like to
ensure we agree on the new bindings this cycle before converting all the
other platforms as this is a bit tedious.
The first two patches are actually fixes and may be considered for this
cycle.
One nice note:
at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
drivers/clk/at91/built-in.o changes that way:
text data bss dec hex
34792 24 732 35548 8adc before
39438 32 741 40211 9d13 after
28300 32 741 29073 7191 without dt-compat
Alexandre Belloni (16):
clk: at91: audio-pll: fix audio pmc type
clk: at91: generated: SSCs don't have a gclk
clk: at91: h32mx: separate registration from DT parsing
clk: at91: audio-pll: separate registration from DT parsing
clk: at91: generated: set audio_pll_allowed in
at91_clk_register_generated()
clk: at91: allow clock registration from C code
clk: at91: add pmc_data struct and helpers
dt-bindings: clk: at91: Document new PMC binding
clk: at91: add new DT lookup function
clk: at91: add sama5d4 pmc driver
clk: at91: add sama5d2 PMC driver
clk: at91: add at91sam9x5 PMCs driver
clk: at91: move DT compatibility code to its own file
ARM: dts: at91: sama5d4: switch to new clock bindings
ARM: dts: at91: sama5d2: switch to new binding
ARM: dts: at91: at91sam9x5: switch to new clock bindings
.../devicetree/bindings/clock/at91-clock.txt | 523 +---------
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +-----
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 +-----------
arch/arm/boot/dts/sama5d4.dtsi | 535 +---------
drivers/clk/at91/Makefile | 5 +-
drivers/clk/at91/at91sam9x5.c | 302 ++++++
drivers/clk/at91/clk-audio-pll.c | 107 +-
drivers/clk/at91/clk-generated.c | 81 +-
drivers/clk/at91/clk-h32mx.c | 22 +-
drivers/clk/at91/clk-i2s-mux.c | 40 +-
drivers/clk/at91/clk-main.c | 112 +-
drivers/clk/at91/clk-master.c | 99 +-
drivers/clk/at91/clk-peripheral.c | 81 +-
drivers/clk/at91/clk-pll.c | 187 +---
drivers/clk/at91/clk-plldiv.c | 27 +-
drivers/clk/at91/clk-programmable.c | 81 +-
drivers/clk/at91/clk-slow.c | 32 +-
drivers/clk/at91/clk-smd.c | 34 +-
drivers/clk/at91/clk-system.c | 39 +-
drivers/clk/at91/clk-usb.c | 94 +-
drivers/clk/at91/clk-utmi.c | 45 +-
drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++
drivers/clk/at91/pmc.c | 78 ++
drivers/clk/at91/pmc.h | 157 +++
drivers/clk/at91/sama5d2.c | 333 ++++++
drivers/clk/at91/sama5d4.c | 262 +++++
include/dt-bindings/clock/at91.h | 14 +
43 files changed, 2398 insertions(+), 2946 deletions(-)
create mode 100644 drivers/clk/at91/at91sam9x5.c
create mode 100644 drivers/clk/at91/dt-compat.c
create mode 100644 drivers/clk/at91/sama5d2.c
create mode 100644 drivers/clk/at91/sama5d4.c
--
2.18.0
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 01/16] clk: at91: audio-pll: fix audio pmc type
2018-07-17 22:27 ` Alexandre Belloni
(?)
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-audio-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index da7bafcfbe70..b3eaf654fac9 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -509,7 +509,7 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
{
- struct clk_audio_pad *apmc_ck;
+ struct clk_audio_pmc *apmc_ck;
struct clk_init_data init = {};
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 01/16] clk: at91: audio-pll: fix audio pmc type
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: devicetree, Alexandre Belloni, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-audio-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index da7bafcfbe70..b3eaf654fac9 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -509,7 +509,7 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
{
- struct clk_audio_pad *apmc_ck;
+ struct clk_audio_pmc *apmc_ck;
struct clk_init_data init = {};
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 01/16] clk: at91: audio-pll: fix audio pmc type
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
The allocation for the audio pmc is using the size of struct clk_audio_pad
instead of struct clk_audio_pmc. This works fine because the former is
larger than the latter but it is safer to be correct.
Fixes: ("0865805d82d4 clk: at91: add audio pll clock drivers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-audio-pll.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index da7bafcfbe70..b3eaf654fac9 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -509,7 +509,7 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
{
- struct clk_audio_pad *apmc_ck;
+ struct clk_audio_pmc *apmc_ck;
struct clk_init_data init = {};
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 02/16] clk: at91: generated: SSCs don't have a gclk
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
As the SSCs don't have gclk, don't check for their ID to allow them to set
the audio pll rate.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 33481368740e..e709a12269c0 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -26,8 +26,6 @@
#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
-#define GCK_ID_SSC0 43
-#define GCK_ID_SSC1 44
#define GCK_ID_I2S0 54
#define GCK_ID_I2S1 55
#define GCK_ID_CLASSD 59
@@ -368,8 +366,7 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
if (of_device_is_compatible(np,
"atmel,sama5d2-clk-generated")) {
- if (gck->id == GCK_ID_SSC0 || gck->id == GCK_ID_SSC1 ||
- gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
+ if (gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
gck->id == GCK_ID_CLASSD)
gck->audio_pll_allowed = true;
else
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 02/16] clk: at91: generated: SSCs don't have a gclk
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
As the SSCs don't have gclk, don't check for their ID to allow them to set
the audio pll rate.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 33481368740e..e709a12269c0 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -26,8 +26,6 @@
#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
-#define GCK_ID_SSC0 43
-#define GCK_ID_SSC1 44
#define GCK_ID_I2S0 54
#define GCK_ID_I2S1 55
#define GCK_ID_CLASSD 59
@@ -368,8 +366,7 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
if (of_device_is_compatible(np,
"atmel,sama5d2-clk-generated")) {
- if (gck->id == GCK_ID_SSC0 || gck->id == GCK_ID_SSC1 ||
- gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
+ if (gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
gck->id == GCK_ID_CLASSD)
gck->audio_pll_allowed = true;
else
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 03/16] clk: at91: h32mx: separate registration from DT parsing
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Separate registration out of of_sama5d4_clk_h32mx_setup to allow other code
to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-h32mx.c | 40 ++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
index e0daa4a31f88..a3274648b6c0 100644
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@@ -86,25 +86,19 @@ static const struct clk_ops h32mx_ops = {
.set_rate = clk_sama5d4_h32mx_set_rate,
};
-static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+struct clk_hw * __init
+at91_clk_register_h32mx(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_sama5d4_h32mx *h32mxclk;
struct clk_init_data init;
- const char *parent_name;
- struct regmap *regmap;
int ret;
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
h32mxclk = kzalloc(sizeof(*h32mxclk), GFP_KERNEL);
if (!h32mxclk)
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
+ return ERR_PTR(-ENOMEM);
- init.name = np->name;
+ init.name = name;
init.ops = &h32mx_ops;
init.parent_names = parent_name ? &parent_name : NULL;
init.num_parents = parent_name ? 1 : 0;
@@ -116,10 +110,30 @@ static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
ret = clk_hw_register(NULL, &h32mxclk->hw);
if (ret) {
kfree(h32mxclk);
- return;
+ return ERR_PTR(ret);
}
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, &h32mxclk->hw);
+ return &h32mxclk->hw;
+}
+
+static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_h32mx(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
of_sama5d4_clk_h32mx_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 03/16] clk: at91: h32mx: separate registration from DT parsing
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Separate registration out of of_sama5d4_clk_h32mx_setup to allow other code
to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-h32mx.c | 40 ++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
index e0daa4a31f88..a3274648b6c0 100644
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@@ -86,25 +86,19 @@ static const struct clk_ops h32mx_ops = {
.set_rate = clk_sama5d4_h32mx_set_rate,
};
-static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+struct clk_hw * __init
+at91_clk_register_h32mx(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_sama5d4_h32mx *h32mxclk;
struct clk_init_data init;
- const char *parent_name;
- struct regmap *regmap;
int ret;
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
h32mxclk = kzalloc(sizeof(*h32mxclk), GFP_KERNEL);
if (!h32mxclk)
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
+ return ERR_PTR(-ENOMEM);
- init.name = np->name;
+ init.name = name;
init.ops = &h32mx_ops;
init.parent_names = parent_name ? &parent_name : NULL;
init.num_parents = parent_name ? 1 : 0;
@@ -116,10 +110,30 @@ static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
ret = clk_hw_register(NULL, &h32mxclk->hw);
if (ret) {
kfree(h32mxclk);
- return;
+ return ERR_PTR(ret);
}
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, &h32mxclk->hw);
+ return &h32mxclk->hw;
+}
+
+static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_h32mx(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
of_sama5d4_clk_h32mx_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 04/16] clk: at91: audio-pll: separate registration from DT parsing
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Separate registration out of of_sama5d2_clk_audio_pll*_setup to allow other
code to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-audio-pll.c | 147 +++++++++++++++++++++++--------
1 file changed, 109 insertions(+), 38 deletions(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index b3eaf654fac9..f326023a50a3 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -444,85 +444,156 @@ static const struct clk_ops audio_pll_pmc_ops = {
.set_rate = clk_audio_pll_pmc_set_rate,
};
-static int of_sama5d2_clk_audio_pll_setup(struct device_node *np,
- struct clk_init_data *init,
- struct clk_hw *hw,
- struct regmap **clk_audio_regmap)
+struct clk_hw * __init
+at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
- struct regmap *regmap;
- const char *parent_names[1];
+ struct clk_audio_frac *frac_ck;
+ struct clk_init_data init = {};
int ret;
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ frac_ck = kzalloc(sizeof(*frac_ck), GFP_KERNEL);
+ if (!frac_ck)
+ return ERR_PTR(-ENOMEM);
- init->name = np->name;
- of_clk_parent_fill(np, parent_names, 1);
- init->parent_names = parent_names;
- init->num_parents = 1;
+ init.name = name;
+ init.ops = &audio_pll_frac_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_GATE;
- hw->init = init;
- *clk_audio_regmap = regmap;
+ frac_ck->hw.init = &init;
+ frac_ck->regmap = regmap;
- ret = clk_hw_register(NULL, hw);
- if (ret)
- return ret;
+ ret = clk_hw_register(NULL, &frac_ck->hw);
+ if (ret) {
+ kfree(frac_ck);
+ return ERR_PTR(ret);
+ }
- return of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return &frac_ck->hw;
}
static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
{
- struct clk_audio_frac *frac_ck;
- struct clk_init_data init = {};
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
- frac_ck = kzalloc(sizeof(*frac_ck), GFP_KERNEL);
- if (!frac_ck)
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
return;
- init.ops = &audio_pll_frac_ops;
- init.flags = CLK_SET_RATE_GATE;
+ parent_name = of_clk_get_parent_name(np, 0);
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &frac_ck->hw,
- &frac_ck->regmap))
- kfree(frac_ck);
+ hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
-static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+struct clk_hw * __init
+at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_audio_pad *apad_ck;
- struct clk_init_data init = {};
+ struct clk_init_data init;
+ int ret;
apad_ck = kzalloc(sizeof(*apad_ck), GFP_KERNEL);
if (!apad_ck)
- return;
+ return ERR_PTR(-ENOMEM);
+ init.name = name;
init.ops = &audio_pll_pad_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT;
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &apad_ck->hw,
- &apad_ck->regmap))
+ apad_ck->hw.init = &init;
+ apad_ck->regmap = regmap;
+
+ ret = clk_hw_register(NULL, &apad_ck->hw);
+ if (ret) {
kfree(apad_ck);
+ return ERR_PTR(ret);
+ }
+
+ return &apad_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_audio_pmc *apmc_ck;
- struct clk_init_data init = {};
+ struct clk_init_data init;
+ int ret;
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
if (!apmc_ck)
- return;
+ return ERR_PTR(-ENOMEM);
+ init.name = name;
init.ops = &audio_pll_pmc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT;
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &apmc_ck->hw,
- &apmc_ck->regmap))
+ apmc_ck->hw.init = &init;
+ apmc_ck->regmap = regmap;
+
+ ret = clk_hw_register(NULL, &apmc_ck->hw);
+ if (ret) {
kfree(apmc_ck);
+ return ERR_PTR(ret);
+ }
+
+ return &apmc_ck->hw;
+}
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 04/16] clk: at91: audio-pll: separate registration from DT parsing
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Separate registration out of of_sama5d2_clk_audio_pll*_setup to allow other
code to use it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-audio-pll.c | 147 +++++++++++++++++++++++--------
1 file changed, 109 insertions(+), 38 deletions(-)
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index b3eaf654fac9..f326023a50a3 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -444,85 +444,156 @@ static const struct clk_ops audio_pll_pmc_ops = {
.set_rate = clk_audio_pll_pmc_set_rate,
};
-static int of_sama5d2_clk_audio_pll_setup(struct device_node *np,
- struct clk_init_data *init,
- struct clk_hw *hw,
- struct regmap **clk_audio_regmap)
+struct clk_hw * __init
+at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
- struct regmap *regmap;
- const char *parent_names[1];
+ struct clk_audio_frac *frac_ck;
+ struct clk_init_data init = {};
int ret;
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ frac_ck = kzalloc(sizeof(*frac_ck), GFP_KERNEL);
+ if (!frac_ck)
+ return ERR_PTR(-ENOMEM);
- init->name = np->name;
- of_clk_parent_fill(np, parent_names, 1);
- init->parent_names = parent_names;
- init->num_parents = 1;
+ init.name = name;
+ init.ops = &audio_pll_frac_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = CLK_SET_RATE_GATE;
- hw->init = init;
- *clk_audio_regmap = regmap;
+ frac_ck->hw.init = &init;
+ frac_ck->regmap = regmap;
- ret = clk_hw_register(NULL, hw);
- if (ret)
- return ret;
+ ret = clk_hw_register(NULL, &frac_ck->hw);
+ if (ret) {
+ kfree(frac_ck);
+ return ERR_PTR(ret);
+ }
- return of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return &frac_ck->hw;
}
static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
{
- struct clk_audio_frac *frac_ck;
- struct clk_init_data init = {};
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
- frac_ck = kzalloc(sizeof(*frac_ck), GFP_KERNEL);
- if (!frac_ck)
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
return;
- init.ops = &audio_pll_frac_ops;
- init.flags = CLK_SET_RATE_GATE;
+ parent_name = of_clk_get_parent_name(np, 0);
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &frac_ck->hw,
- &frac_ck->regmap))
- kfree(frac_ck);
+ hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
-static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+struct clk_hw * __init
+at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_audio_pad *apad_ck;
- struct clk_init_data init = {};
+ struct clk_init_data init;
+ int ret;
apad_ck = kzalloc(sizeof(*apad_ck), GFP_KERNEL);
if (!apad_ck)
- return;
+ return ERR_PTR(-ENOMEM);
+ init.name = name;
init.ops = &audio_pll_pad_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT;
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &apad_ck->hw,
- &apad_ck->regmap))
+ apad_ck->hw.init = &init;
+ apad_ck->regmap = regmap;
+
+ ret = clk_hw_register(NULL, &apad_ck->hw);
+ if (ret) {
kfree(apad_ck);
+ return ERR_PTR(ret);
+ }
+
+ return &apad_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
+ const char *parent_name)
{
struct clk_audio_pmc *apmc_ck;
- struct clk_init_data init = {};
+ struct clk_init_data init;
+ int ret;
apmc_ck = kzalloc(sizeof(*apmc_ck), GFP_KERNEL);
if (!apmc_ck)
- return;
+ return ERR_PTR(-ENOMEM);
+ init.name = name;
init.ops = &audio_pll_pmc_ops;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT;
- if (of_sama5d2_clk_audio_pll_setup(np, &init, &apmc_ck->hw,
- &apmc_ck->regmap))
+ apmc_ck->hw.init = &init;
+ apmc_ck->regmap = regmap;
+
+ ret = clk_hw_register(NULL, &apmc_ck->hw);
+ if (ret) {
kfree(apmc_ck);
+ return ERR_PTR(ret);
+ }
+
+ return &apmc_ck->hw;
+}
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
}
CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 05/16] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated()
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Set gck->audio_pll_allowed in at91_clk_register_generated. This makes it
easier to do it from code that is not parsing device tree.
Also, this fixes an issue where the resulting clk_hw can be dereferenced
before being tested for error.
Fixes: 1a1a36d72e3d ("clk: at91: clk-generated: make gclk determine audio_pll rate")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index e709a12269c0..6dfee6e588c4 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -280,7 +280,7 @@ static void clk_generated_startup(struct clk_generated *gck)
static struct clk_hw * __init
at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
const char *name, const char **parent_names,
- u8 num_parents, u8 id,
+ u8 num_parents, u8 id, bool pll_audio,
const struct clk_range *range)
{
struct clk_generated *gck;
@@ -304,6 +304,7 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
gck->regmap = regmap;
gck->lock = lock;
gck->range = *range;
+ gck->audio_pll_allowed = pll_audio;
clk_generated_startup(gck);
hw = &gck->hw;
@@ -329,7 +330,6 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
struct device_node *gcknp;
struct clk_range range = CLK_RANGE(0, 0);
struct regmap *regmap;
- struct clk_generated *gck;
num_parents = of_clk_get_parent_count(np);
if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
@@ -346,6 +346,8 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
return;
for_each_child_of_node(np, gcknp) {
+ bool pll_audio = false;
+
if (of_property_read_u32(gcknp, "reg", &id))
continue;
@@ -358,23 +360,14 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
&range);
+ if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
+ (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
+ id == GCK_ID_CLASSD))
+ pll_audio = true;
+
hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
parent_names, num_parents,
- id, &range);
-
- gck = to_clk_generated(hw);
-
- if (of_device_is_compatible(np,
- "atmel,sama5d2-clk-generated")) {
- if (gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
- gck->id == GCK_ID_CLASSD)
- gck->audio_pll_allowed = true;
- else
- gck->audio_pll_allowed = false;
- } else {
- gck->audio_pll_allowed = false;
- }
-
+ id, pll_audio, &range);
if (IS_ERR(hw))
continue;
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 05/16] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated()
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Set gck->audio_pll_allowed in at91_clk_register_generated. This makes it
easier to do it from code that is not parsing device tree.
Also, this fixes an issue where the resulting clk_hw can be dereferenced
before being tested for error.
Fixes: 1a1a36d72e3d ("clk: at91: clk-generated: make gclk determine audio_pll rate")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 27 ++++++++++-----------------
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index e709a12269c0..6dfee6e588c4 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -280,7 +280,7 @@ static void clk_generated_startup(struct clk_generated *gck)
static struct clk_hw * __init
at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
const char *name, const char **parent_names,
- u8 num_parents, u8 id,
+ u8 num_parents, u8 id, bool pll_audio,
const struct clk_range *range)
{
struct clk_generated *gck;
@@ -304,6 +304,7 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
gck->regmap = regmap;
gck->lock = lock;
gck->range = *range;
+ gck->audio_pll_allowed = pll_audio;
clk_generated_startup(gck);
hw = &gck->hw;
@@ -329,7 +330,6 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
struct device_node *gcknp;
struct clk_range range = CLK_RANGE(0, 0);
struct regmap *regmap;
- struct clk_generated *gck;
num_parents = of_clk_get_parent_count(np);
if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
@@ -346,6 +346,8 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
return;
for_each_child_of_node(np, gcknp) {
+ bool pll_audio = false;
+
if (of_property_read_u32(gcknp, "reg", &id))
continue;
@@ -358,23 +360,14 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
&range);
+ if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
+ (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
+ id == GCK_ID_CLASSD))
+ pll_audio = true;
+
hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
parent_names, num_parents,
- id, &range);
-
- gck = to_clk_generated(hw);
-
- if (of_device_is_compatible(np,
- "atmel,sama5d2-clk-generated")) {
- if (gck->id == GCK_ID_I2S0 || gck->id == GCK_ID_I2S1 ||
- gck->id == GCK_ID_CLASSD)
- gck->audio_pll_allowed = true;
- else
- gck->audio_pll_allowed = false;
- } else {
- gck->audio_pll_allowed = false;
- }
-
+ id, pll_audio, &range);
if (IS_ERR(hw))
continue;
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 06/16] clk: at91: allow clock registration from C code
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 2 +-
drivers/clk/at91/clk-i2s-mux.c | 2 +-
drivers/clk/at91/clk-main.c | 8 +-
drivers/clk/at91/clk-master.c | 17 +---
drivers/clk/at91/clk-peripheral.c | 4 +-
drivers/clk/at91/clk-pll.c | 24 +----
drivers/clk/at91/clk-plldiv.c | 2 +-
drivers/clk/at91/clk-programmable.c | 14 +--
drivers/clk/at91/clk-slow.c | 2 +-
drivers/clk/at91/clk-smd.c | 2 +-
drivers/clk/at91/clk-system.c | 2 +-
drivers/clk/at91/clk-usb.c | 6 +-
drivers/clk/at91/clk-utmi.c | 2 +-
drivers/clk/at91/pmc.h | 142 ++++++++++++++++++++++++++++
14 files changed, 170 insertions(+), 59 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 6dfee6e588c4..0fe4d7f04225 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -277,7 +277,7 @@ static void clk_generated_startup(struct clk_generated *gck)
>> AT91_PMC_PCR_GCKDIV_OFFSET;
}
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
const char *name, const char **parent_names,
u8 num_parents, u8 id, bool pll_audio,
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index f0c3c3079f04..ed9e96938589 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -48,7 +48,7 @@ static const struct clk_ops clk_i2s_mux_ops = {
.determine_rate = __clk_mux_determine_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
const char * const *parent_names,
unsigned int num_parents, u8 bus_id)
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c813c27f2e58..82184009137d 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -128,7 +128,7 @@ static const struct clk_ops main_osc_ops = {
.is_prepared = clk_main_osc_is_prepared,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_main_osc(struct regmap *regmap,
const char *name,
const char *parent_name,
@@ -275,7 +275,7 @@ static const struct clk_ops main_rc_osc_ops = {
.recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_main_rc_osc(struct regmap *regmap,
const char *name,
u32 frequency, u32 accuracy)
@@ -403,7 +403,7 @@ static const struct clk_ops rm9200_main_ops = {
.recalc_rate = clk_rm9200_main_recalc_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_rm9200_main(struct regmap *regmap,
const char *name,
const char *parent_name)
@@ -541,7 +541,7 @@ static const struct clk_ops sam9x5_main_ops = {
.get_parent = clk_sam9x5_main_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9x5_main(struct regmap *regmap,
const char *name,
const char **parent_names,
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index e9cba9fc26d7..088044bb6ea2 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -24,17 +24,6 @@
#define MASTER_DIV_SHIFT 8
#define MASTER_DIV_MASK 0x3
-struct clk_master_characteristics {
- struct clk_range output;
- u32 divisors[4];
- u8 have_div3_pres;
-};
-
-struct clk_master_layout {
- u32 mask;
- u8 pres_shift;
-};
-
#define to_clk_master(hw) container_of(hw, struct clk_master, hw)
struct clk_master {
@@ -120,7 +109,7 @@ static const struct clk_ops master_ops = {
.get_parent = clk_master_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_master(struct regmap *regmap,
const char *name, int num_parents,
const char **parent_names,
@@ -161,12 +150,12 @@ at91_clk_register_master(struct regmap *regmap,
}
-static const struct clk_master_layout at91rm9200_master_layout = {
+const struct clk_master_layout at91rm9200_master_layout = {
.mask = 0x31F,
.pres_shift = 2,
};
-static const struct clk_master_layout at91sam9x5_master_layout = {
+const struct clk_master_layout at91sam9x5_master_layout = {
.mask = 0x373,
.pres_shift = 4,
};
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index 770118369230..cb41d06a2481 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -104,7 +104,7 @@ static const struct clk_ops peripheral_ops = {
.is_enabled = clk_peripheral_is_enabled,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_peripheral(struct regmap *regmap, const char *name,
const char *parent_name, u32 id)
{
@@ -331,7 +331,7 @@ static const struct clk_ops sam9x5_peripheral_ops = {
.set_rate = clk_sam9x5_peripheral_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
const char *name, const char *parent_name,
u32 id, const struct clk_range *range)
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 72b6091eb7b9..31fff0b9d5c2 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -34,20 +34,6 @@
#define PLL_OUT_SHIFT 14
#define PLL_MAX_ID 1
-struct clk_pll_characteristics {
- struct clk_range input;
- int num_output;
- struct clk_range *output;
- u16 *icpll;
- u8 *out;
-};
-
-struct clk_pll_layout {
- u32 pllr_mask;
- u16 mul_mask;
- u8 mul_shift;
-};
-
#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
struct clk_pll {
@@ -285,7 +271,7 @@ static const struct clk_ops pll_ops = {
.set_rate = clk_pll_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_pll(struct regmap *regmap, const char *name,
const char *parent_name, u8 id,
const struct clk_pll_layout *layout,
@@ -331,25 +317,25 @@ at91_clk_register_pll(struct regmap *regmap, const char *name,
}
-static const struct clk_pll_layout at91rm9200_pll_layout = {
+const struct clk_pll_layout at91rm9200_pll_layout = {
.pllr_mask = 0x7FFFFFF,
.mul_shift = 16,
.mul_mask = 0x7FF,
};
-static const struct clk_pll_layout at91sam9g45_pll_layout = {
+const struct clk_pll_layout at91sam9g45_pll_layout = {
.pllr_mask = 0xFFFFFF,
.mul_shift = 16,
.mul_mask = 0xFF,
};
-static const struct clk_pll_layout at91sam9g20_pllb_layout = {
+const struct clk_pll_layout at91sam9g20_pllb_layout = {
.pllr_mask = 0x3FFFFF,
.mul_shift = 16,
.mul_mask = 0x3F,
};
-static const struct clk_pll_layout sama5d3_pll_layout = {
+const struct clk_pll_layout sama5d3_pll_layout = {
.pllr_mask = 0x1FFFFFF,
.mul_shift = 18,
.mul_mask = 0x7F,
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
index b4afaf22f3fd..de803a2b27d3 100644
--- a/drivers/clk/at91/clk-plldiv.c
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -75,7 +75,7 @@ static const struct clk_ops plldiv_ops = {
.set_rate = clk_plldiv_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_plldiv(struct regmap *regmap, const char *name,
const char *parent_name)
{
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
index 0e6aab1252fc..df302bfa8259 100644
--- a/drivers/clk/at91/clk-programmable.c
+++ b/drivers/clk/at91/clk-programmable.c
@@ -25,12 +25,6 @@
#define PROG_PRES(layout, pckr) ((pckr >> layout->pres_shift) & PROG_PRES_MASK)
#define PROG_MAX_RM9200_CSS 3
-struct clk_programmable_layout {
- u8 pres_shift;
- u8 css_mask;
- u8 have_slck_mck;
-};
-
struct clk_programmable {
struct clk_hw hw;
struct regmap *regmap;
@@ -170,7 +164,7 @@ static const struct clk_ops programmable_ops = {
.set_rate = clk_programmable_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_programmable(struct regmap *regmap,
const char *name, const char **parent_names,
u8 num_parents, u8 id,
@@ -211,19 +205,19 @@ at91_clk_register_programmable(struct regmap *regmap,
return hw;
}
-static const struct clk_programmable_layout at91rm9200_programmable_layout = {
+const struct clk_programmable_layout at91rm9200_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 0,
};
-static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
+const struct clk_programmable_layout at91sam9g45_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 1,
};
-static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
+const struct clk_programmable_layout at91sam9x5_programmable_layout = {
.pres_shift = 4,
.css_mask = 0x7,
.have_slck_mck = 0,
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
index 560a8b9abf93..a890132db68f 100644
--- a/drivers/clk/at91/clk-slow.c
+++ b/drivers/clk/at91/clk-slow.c
@@ -40,7 +40,7 @@ static const struct clk_ops sam9260_slow_ops = {
.get_parent = clk_sam9260_slow_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9260_slow(struct regmap *regmap,
const char *name,
const char **parent_names,
diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
index 965c662b90a5..bbf5dc91777f 100644
--- a/drivers/clk/at91/clk-smd.c
+++ b/drivers/clk/at91/clk-smd.c
@@ -111,7 +111,7 @@ static const struct clk_ops at91sam9x5_smd_ops = {
.set_rate = at91sam9x5_clk_smd_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
const char **parent_names, u8 num_parents)
{
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 86a36809765d..1ac0144a38c0 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -88,7 +88,7 @@ static const struct clk_ops system_ops = {
.is_prepared = clk_system_is_prepared,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_system(struct regmap *regmap, const char *name,
const char *parent_name, u8 id)
{
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 791770a563fc..a728320877dd 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -192,7 +192,7 @@ static const struct clk_ops at91sam9n12_usb_ops = {
.set_rate = at91sam9x5_clk_usb_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
const char **parent_names, u8 num_parents)
{
@@ -225,7 +225,7 @@ at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
return hw;
}
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name,
const char *parent_name)
{
@@ -342,7 +342,7 @@ static const struct clk_ops at91rm9200_usb_ops = {
.set_rate = at91rm9200_clk_usb_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
const char *parent_name, const u32 *divisors)
{
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index cd8d689138ff..6c69b6ac71e1 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -125,7 +125,7 @@ static const struct clk_ops utmi_ops = {
.recalc_rate = clk_utmi_recalc_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
const char *name, const char *parent_name)
{
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index d22b1fa9ecdc..3dc50267a458 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -26,9 +26,151 @@ struct clk_range {
#define CLK_RANGE(MIN, MAX) {.min = MIN, .max = MAX,}
+struct clk_master_layout {
+ u32 mask;
+ u8 pres_shift;
+};
+
+extern const struct clk_master_layout at91rm9200_master_layout;
+extern const struct clk_master_layout at91sam9x5_master_layout;
+
+struct clk_master_characteristics {
+ struct clk_range output;
+ u32 divisors[4];
+ u8 have_div3_pres;
+};
+
+struct clk_pll_layout {
+ u32 pllr_mask;
+ u16 mul_mask;
+ u8 mul_shift;
+};
+
+extern const struct clk_pll_layout at91rm9200_pll_layout;
+extern const struct clk_pll_layout at91sam9g45_pll_layout;
+extern const struct clk_pll_layout at91sam9g20_pllb_layout;
+extern const struct clk_pll_layout sama5d3_pll_layout;
+
+struct clk_pll_characteristics {
+ struct clk_range input;
+ int num_output;
+ struct clk_range *output;
+ u16 *icpll;
+ u8 *out;
+};
+
+struct clk_programmable_layout {
+ u8 pres_shift;
+ u8 css_mask;
+ u8 have_slck_mck;
+};
+
+extern const struct clk_programmable_layout at91rm9200_programmable_layout;
+extern const struct clk_programmable_layout at91sam9g45_programmable_layout;
+extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
+
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
+struct clk_hw *of_clk_hw_pmc_get(struct of_phandle_args *clkspec, void *data);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char **parent_names,
+ u8 num_parents, u8 id, bool pll_audio,
+ const struct clk_range *range);
+
+struct clk_hw * __init
+at91_clk_register_h32mx(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
+ const char * const *parent_names,
+ unsigned int num_parents, u8 bus_id);
+
+struct clk_hw * __init
+at91_clk_register_main_rc_osc(struct regmap *regmap, const char *name,
+ u32 frequency, u32 accuracy);
+struct clk_hw * __init
+at91_clk_register_main_osc(struct regmap *regmap, const char *name,
+ const char *parent_name, bool bypass);
+struct clk_hw * __init
+at91_clk_register_rm9200_main(struct regmap *regmap,
+ const char *name,
+ const char *parent_name);
+struct clk_hw * __init
+at91_clk_register_sam9x5_main(struct regmap *regmap, const char *name,
+ const char **parent_names, int num_parents);
+
+struct clk_hw * __init
+at91_clk_register_master(struct regmap *regmap, const char *name,
+ int num_parents, const char **parent_names,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics);
+
+struct clk_hw * __init
+at91_clk_register_peripheral(struct regmap *regmap, const char *name,
+ const char *parent_name, u32 id);
+struct clk_hw * __init
+at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name,
+ u32 id, const struct clk_range *range);
+
+struct clk_hw * __init
+at91_clk_register_pll(struct regmap *regmap, const char *name,
+ const char *parent_name, u8 id,
+ const struct clk_pll_layout *layout,
+ const struct clk_pll_characteristics *characteristics);
+struct clk_hw * __init
+at91_clk_register_plldiv(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_programmable(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents, u8 id,
+ const struct clk_programmable_layout *layout);
+
+struct clk_hw * __init
+at91_clk_register_sam9260_slow(struct regmap *regmap,
+ const char *name,
+ const char **parent_names,
+ int num_parents);
+
+struct clk_hw * __init
+at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents);
+
+struct clk_hw * __init
+at91_clk_register_system(struct regmap *regmap, const char *name,
+ const char *parent_name, u8 id);
+
+struct clk_hw * __init
+at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents);
+struct clk_hw * __init
+at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name,
+ const char *parent_name);
+struct clk_hw * __init
+at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
+ const char *parent_name, const u32 *divisors);
+
+struct clk_hw * __init
+at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
+ const char *name, const char *parent_name);
+
#ifdef CONFIG_PM
void pmc_register_id(u8 id);
void pmc_register_pck(u8 pck);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 06/16] clk: at91: allow clock registration from C code
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Remove static keyword to allow functions to be used from other units. Also
move some struct and function declarations to pmc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/clk-generated.c | 2 +-
drivers/clk/at91/clk-i2s-mux.c | 2 +-
drivers/clk/at91/clk-main.c | 8 +-
drivers/clk/at91/clk-master.c | 17 +---
drivers/clk/at91/clk-peripheral.c | 4 +-
drivers/clk/at91/clk-pll.c | 24 +----
drivers/clk/at91/clk-plldiv.c | 2 +-
drivers/clk/at91/clk-programmable.c | 14 +--
drivers/clk/at91/clk-slow.c | 2 +-
drivers/clk/at91/clk-smd.c | 2 +-
drivers/clk/at91/clk-system.c | 2 +-
drivers/clk/at91/clk-usb.c | 6 +-
drivers/clk/at91/clk-utmi.c | 2 +-
drivers/clk/at91/pmc.h | 142 ++++++++++++++++++++++++++++
14 files changed, 170 insertions(+), 59 deletions(-)
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 6dfee6e588c4..0fe4d7f04225 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -277,7 +277,7 @@ static void clk_generated_startup(struct clk_generated *gck)
>> AT91_PMC_PCR_GCKDIV_OFFSET;
}
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
const char *name, const char **parent_names,
u8 num_parents, u8 id, bool pll_audio,
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index f0c3c3079f04..ed9e96938589 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -48,7 +48,7 @@ static const struct clk_ops clk_i2s_mux_ops = {
.determine_rate = __clk_mux_determine_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
const char * const *parent_names,
unsigned int num_parents, u8 bus_id)
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c813c27f2e58..82184009137d 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -128,7 +128,7 @@ static const struct clk_ops main_osc_ops = {
.is_prepared = clk_main_osc_is_prepared,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_main_osc(struct regmap *regmap,
const char *name,
const char *parent_name,
@@ -275,7 +275,7 @@ static const struct clk_ops main_rc_osc_ops = {
.recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_main_rc_osc(struct regmap *regmap,
const char *name,
u32 frequency, u32 accuracy)
@@ -403,7 +403,7 @@ static const struct clk_ops rm9200_main_ops = {
.recalc_rate = clk_rm9200_main_recalc_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_rm9200_main(struct regmap *regmap,
const char *name,
const char *parent_name)
@@ -541,7 +541,7 @@ static const struct clk_ops sam9x5_main_ops = {
.get_parent = clk_sam9x5_main_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9x5_main(struct regmap *regmap,
const char *name,
const char **parent_names,
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index e9cba9fc26d7..088044bb6ea2 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -24,17 +24,6 @@
#define MASTER_DIV_SHIFT 8
#define MASTER_DIV_MASK 0x3
-struct clk_master_characteristics {
- struct clk_range output;
- u32 divisors[4];
- u8 have_div3_pres;
-};
-
-struct clk_master_layout {
- u32 mask;
- u8 pres_shift;
-};
-
#define to_clk_master(hw) container_of(hw, struct clk_master, hw)
struct clk_master {
@@ -120,7 +109,7 @@ static const struct clk_ops master_ops = {
.get_parent = clk_master_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_master(struct regmap *regmap,
const char *name, int num_parents,
const char **parent_names,
@@ -161,12 +150,12 @@ at91_clk_register_master(struct regmap *regmap,
}
-static const struct clk_master_layout at91rm9200_master_layout = {
+const struct clk_master_layout at91rm9200_master_layout = {
.mask = 0x31F,
.pres_shift = 2,
};
-static const struct clk_master_layout at91sam9x5_master_layout = {
+const struct clk_master_layout at91sam9x5_master_layout = {
.mask = 0x373,
.pres_shift = 4,
};
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index 770118369230..cb41d06a2481 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -104,7 +104,7 @@ static const struct clk_ops peripheral_ops = {
.is_enabled = clk_peripheral_is_enabled,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_peripheral(struct regmap *regmap, const char *name,
const char *parent_name, u32 id)
{
@@ -331,7 +331,7 @@ static const struct clk_ops sam9x5_peripheral_ops = {
.set_rate = clk_sam9x5_peripheral_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
const char *name, const char *parent_name,
u32 id, const struct clk_range *range)
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 72b6091eb7b9..31fff0b9d5c2 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -34,20 +34,6 @@
#define PLL_OUT_SHIFT 14
#define PLL_MAX_ID 1
-struct clk_pll_characteristics {
- struct clk_range input;
- int num_output;
- struct clk_range *output;
- u16 *icpll;
- u8 *out;
-};
-
-struct clk_pll_layout {
- u32 pllr_mask;
- u16 mul_mask;
- u8 mul_shift;
-};
-
#define to_clk_pll(hw) container_of(hw, struct clk_pll, hw)
struct clk_pll {
@@ -285,7 +271,7 @@ static const struct clk_ops pll_ops = {
.set_rate = clk_pll_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_pll(struct regmap *regmap, const char *name,
const char *parent_name, u8 id,
const struct clk_pll_layout *layout,
@@ -331,25 +317,25 @@ at91_clk_register_pll(struct regmap *regmap, const char *name,
}
-static const struct clk_pll_layout at91rm9200_pll_layout = {
+const struct clk_pll_layout at91rm9200_pll_layout = {
.pllr_mask = 0x7FFFFFF,
.mul_shift = 16,
.mul_mask = 0x7FF,
};
-static const struct clk_pll_layout at91sam9g45_pll_layout = {
+const struct clk_pll_layout at91sam9g45_pll_layout = {
.pllr_mask = 0xFFFFFF,
.mul_shift = 16,
.mul_mask = 0xFF,
};
-static const struct clk_pll_layout at91sam9g20_pllb_layout = {
+const struct clk_pll_layout at91sam9g20_pllb_layout = {
.pllr_mask = 0x3FFFFF,
.mul_shift = 16,
.mul_mask = 0x3F,
};
-static const struct clk_pll_layout sama5d3_pll_layout = {
+const struct clk_pll_layout sama5d3_pll_layout = {
.pllr_mask = 0x1FFFFFF,
.mul_shift = 18,
.mul_mask = 0x7F,
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
index b4afaf22f3fd..de803a2b27d3 100644
--- a/drivers/clk/at91/clk-plldiv.c
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -75,7 +75,7 @@ static const struct clk_ops plldiv_ops = {
.set_rate = clk_plldiv_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_plldiv(struct regmap *regmap, const char *name,
const char *parent_name)
{
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
index 0e6aab1252fc..df302bfa8259 100644
--- a/drivers/clk/at91/clk-programmable.c
+++ b/drivers/clk/at91/clk-programmable.c
@@ -25,12 +25,6 @@
#define PROG_PRES(layout, pckr) ((pckr >> layout->pres_shift) & PROG_PRES_MASK)
#define PROG_MAX_RM9200_CSS 3
-struct clk_programmable_layout {
- u8 pres_shift;
- u8 css_mask;
- u8 have_slck_mck;
-};
-
struct clk_programmable {
struct clk_hw hw;
struct regmap *regmap;
@@ -170,7 +164,7 @@ static const struct clk_ops programmable_ops = {
.set_rate = clk_programmable_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_programmable(struct regmap *regmap,
const char *name, const char **parent_names,
u8 num_parents, u8 id,
@@ -211,19 +205,19 @@ at91_clk_register_programmable(struct regmap *regmap,
return hw;
}
-static const struct clk_programmable_layout at91rm9200_programmable_layout = {
+const struct clk_programmable_layout at91rm9200_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 0,
};
-static const struct clk_programmable_layout at91sam9g45_programmable_layout = {
+const struct clk_programmable_layout at91sam9g45_programmable_layout = {
.pres_shift = 2,
.css_mask = 0x3,
.have_slck_mck = 1,
};
-static const struct clk_programmable_layout at91sam9x5_programmable_layout = {
+const struct clk_programmable_layout at91sam9x5_programmable_layout = {
.pres_shift = 4,
.css_mask = 0x7,
.have_slck_mck = 0,
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
index 560a8b9abf93..a890132db68f 100644
--- a/drivers/clk/at91/clk-slow.c
+++ b/drivers/clk/at91/clk-slow.c
@@ -40,7 +40,7 @@ static const struct clk_ops sam9260_slow_ops = {
.get_parent = clk_sam9260_slow_get_parent,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_sam9260_slow(struct regmap *regmap,
const char *name,
const char **parent_names,
diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
index 965c662b90a5..bbf5dc91777f 100644
--- a/drivers/clk/at91/clk-smd.c
+++ b/drivers/clk/at91/clk-smd.c
@@ -111,7 +111,7 @@ static const struct clk_ops at91sam9x5_smd_ops = {
.set_rate = at91sam9x5_clk_smd_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
const char **parent_names, u8 num_parents)
{
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 86a36809765d..1ac0144a38c0 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -88,7 +88,7 @@ static const struct clk_ops system_ops = {
.is_prepared = clk_system_is_prepared,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_system(struct regmap *regmap, const char *name,
const char *parent_name, u8 id)
{
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index 791770a563fc..a728320877dd 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -192,7 +192,7 @@ static const struct clk_ops at91sam9n12_usb_ops = {
.set_rate = at91sam9x5_clk_usb_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
const char **parent_names, u8 num_parents)
{
@@ -225,7 +225,7 @@ at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
return hw;
}
-static struct clk_hw * __init
+struct clk_hw * __init
at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name,
const char *parent_name)
{
@@ -342,7 +342,7 @@ static const struct clk_ops at91rm9200_usb_ops = {
.set_rate = at91rm9200_clk_usb_set_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
const char *parent_name, const u32 *divisors)
{
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index cd8d689138ff..6c69b6ac71e1 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -125,7 +125,7 @@ static const struct clk_ops utmi_ops = {
.recalc_rate = clk_utmi_recalc_rate,
};
-static struct clk_hw * __init
+struct clk_hw * __init
at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
const char *name, const char *parent_name)
{
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index d22b1fa9ecdc..3dc50267a458 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -26,9 +26,151 @@ struct clk_range {
#define CLK_RANGE(MIN, MAX) {.min = MIN, .max = MAX,}
+struct clk_master_layout {
+ u32 mask;
+ u8 pres_shift;
+};
+
+extern const struct clk_master_layout at91rm9200_master_layout;
+extern const struct clk_master_layout at91sam9x5_master_layout;
+
+struct clk_master_characteristics {
+ struct clk_range output;
+ u32 divisors[4];
+ u8 have_div3_pres;
+};
+
+struct clk_pll_layout {
+ u32 pllr_mask;
+ u16 mul_mask;
+ u8 mul_shift;
+};
+
+extern const struct clk_pll_layout at91rm9200_pll_layout;
+extern const struct clk_pll_layout at91sam9g45_pll_layout;
+extern const struct clk_pll_layout at91sam9g20_pllb_layout;
+extern const struct clk_pll_layout sama5d3_pll_layout;
+
+struct clk_pll_characteristics {
+ struct clk_range input;
+ int num_output;
+ struct clk_range *output;
+ u16 *icpll;
+ u8 *out;
+};
+
+struct clk_programmable_layout {
+ u8 pres_shift;
+ u8 css_mask;
+ u8 have_slck_mck;
+};
+
+extern const struct clk_programmable_layout at91rm9200_programmable_layout;
+extern const struct clk_programmable_layout at91sam9g45_programmable_layout;
+extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
+
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
+struct clk_hw *of_clk_hw_pmc_get(struct of_phandle_args *clkspec, void *data);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char **parent_names,
+ u8 num_parents, u8 id, bool pll_audio,
+ const struct clk_range *range);
+
+struct clk_hw * __init
+at91_clk_register_h32mx(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
+ const char * const *parent_names,
+ unsigned int num_parents, u8 bus_id);
+
+struct clk_hw * __init
+at91_clk_register_main_rc_osc(struct regmap *regmap, const char *name,
+ u32 frequency, u32 accuracy);
+struct clk_hw * __init
+at91_clk_register_main_osc(struct regmap *regmap, const char *name,
+ const char *parent_name, bool bypass);
+struct clk_hw * __init
+at91_clk_register_rm9200_main(struct regmap *regmap,
+ const char *name,
+ const char *parent_name);
+struct clk_hw * __init
+at91_clk_register_sam9x5_main(struct regmap *regmap, const char *name,
+ const char **parent_names, int num_parents);
+
+struct clk_hw * __init
+at91_clk_register_master(struct regmap *regmap, const char *name,
+ int num_parents, const char **parent_names,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics);
+
+struct clk_hw * __init
+at91_clk_register_peripheral(struct regmap *regmap, const char *name,
+ const char *parent_name, u32 id);
+struct clk_hw * __init
+at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name,
+ u32 id, const struct clk_range *range);
+
+struct clk_hw * __init
+at91_clk_register_pll(struct regmap *regmap, const char *name,
+ const char *parent_name, u8 id,
+ const struct clk_pll_layout *layout,
+ const struct clk_pll_characteristics *characteristics);
+struct clk_hw * __init
+at91_clk_register_plldiv(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+struct clk_hw * __init
+at91_clk_register_programmable(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents, u8 id,
+ const struct clk_programmable_layout *layout);
+
+struct clk_hw * __init
+at91_clk_register_sam9260_slow(struct regmap *regmap,
+ const char *name,
+ const char **parent_names,
+ int num_parents);
+
+struct clk_hw * __init
+at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents);
+
+struct clk_hw * __init
+at91_clk_register_system(struct regmap *regmap, const char *name,
+ const char *parent_name, u8 id);
+
+struct clk_hw * __init
+at91sam9x5_clk_register_usb(struct regmap *regmap, const char *name,
+ const char **parent_names, u8 num_parents);
+struct clk_hw * __init
+at91sam9n12_clk_register_usb(struct regmap *regmap, const char *name,
+ const char *parent_name);
+struct clk_hw * __init
+at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
+ const char *parent_name, const u32 *divisors);
+
+struct clk_hw * __init
+at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
+ const char *name, const char *parent_name);
+
#ifdef CONFIG_PM
void pmc_register_id(u8 id);
void pmc_register_pck(u8 pck);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 07/16] clk: at91: add pmc_data struct and helpers
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Add a new strut to handle references to all the PMC clocks and implement
allocation/free helpers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/pmc.c | 44 ++++++++++++++++++++++++++++++++++++++++++
drivers/clk/at91/pmc.h | 15 ++++++++++++++
2 files changed, 59 insertions(+)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 1fa27f4ea538..0f8b3add1b04 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -47,6 +47,50 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname,
}
EXPORT_SYMBOL_GPL(of_at91_get_clk_range);
+void pmc_data_free(struct pmc_data *pmc_data)
+{
+ kfree(pmc_data->chws);
+ kfree(pmc_data->shws);
+ kfree(pmc_data->phws);
+ kfree(pmc_data->ghws);
+}
+
+struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ unsigned int nperiph, unsigned int ngck)
+{
+ struct pmc_data *pmc_data = kzalloc(sizeof(*pmc_data), GFP_KERNEL);
+
+ if (!pmc_data)
+ return NULL;
+
+ pmc_data->ncore = ncore;
+ pmc_data->chws = kcalloc(ncore, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->chws)
+ goto err;
+
+ pmc_data->nsystem = nsystem;
+ pmc_data->shws = kcalloc(nsystem, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->shws)
+ goto err;
+
+ pmc_data->nperiph = nperiph;
+ pmc_data->phws = kcalloc(nperiph, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->phws)
+ goto err;
+
+ pmc_data->ngck = ngck;
+ pmc_data->ghws = kcalloc(ngck, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->ghws)
+ goto err;
+
+ return pmc_data;
+
+err:
+ pmc_data_free(pmc_data);
+
+ return NULL;
+}
+
#ifdef CONFIG_PM
static struct regmap *pmcreg;
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 3dc50267a458..fa4fd3fc7c32 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -19,6 +19,17 @@
extern spinlock_t pmc_pcr_lock;
+struct pmc_data {
+ unsigned int ncore;
+ struct clk_hw **chws;
+ unsigned int nsystem;
+ struct clk_hw **shws;
+ unsigned int nperiph;
+ struct clk_hw **phws;
+ unsigned int ngck;
+ struct clk_hw **ghws;
+};
+
struct clk_range {
unsigned long min;
unsigned long max;
@@ -69,6 +80,10 @@ extern const struct clk_programmable_layout at91rm9200_programmable_layout;
extern const struct clk_programmable_layout at91sam9g45_programmable_layout;
extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
+struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ unsigned int nperiph, unsigned int ngck);
+void pmc_data_free(struct pmc_data *pmc_data);
+
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 07/16] clk: at91: add pmc_data struct and helpers
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Add a new strut to handle references to all the PMC clocks and implement
allocation/free helpers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/pmc.c | 44 ++++++++++++++++++++++++++++++++++++++++++
drivers/clk/at91/pmc.h | 15 ++++++++++++++
2 files changed, 59 insertions(+)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 1fa27f4ea538..0f8b3add1b04 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -47,6 +47,50 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname,
}
EXPORT_SYMBOL_GPL(of_at91_get_clk_range);
+void pmc_data_free(struct pmc_data *pmc_data)
+{
+ kfree(pmc_data->chws);
+ kfree(pmc_data->shws);
+ kfree(pmc_data->phws);
+ kfree(pmc_data->ghws);
+}
+
+struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ unsigned int nperiph, unsigned int ngck)
+{
+ struct pmc_data *pmc_data = kzalloc(sizeof(*pmc_data), GFP_KERNEL);
+
+ if (!pmc_data)
+ return NULL;
+
+ pmc_data->ncore = ncore;
+ pmc_data->chws = kcalloc(ncore, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->chws)
+ goto err;
+
+ pmc_data->nsystem = nsystem;
+ pmc_data->shws = kcalloc(nsystem, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->shws)
+ goto err;
+
+ pmc_data->nperiph = nperiph;
+ pmc_data->phws = kcalloc(nperiph, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->phws)
+ goto err;
+
+ pmc_data->ngck = ngck;
+ pmc_data->ghws = kcalloc(ngck, sizeof(struct clk_hw *), GFP_KERNEL);
+ if (!pmc_data->ghws)
+ goto err;
+
+ return pmc_data;
+
+err:
+ pmc_data_free(pmc_data);
+
+ return NULL;
+}
+
#ifdef CONFIG_PM
static struct regmap *pmcreg;
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 3dc50267a458..fa4fd3fc7c32 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -19,6 +19,17 @@
extern spinlock_t pmc_pcr_lock;
+struct pmc_data {
+ unsigned int ncore;
+ struct clk_hw **chws;
+ unsigned int nsystem;
+ struct clk_hw **shws;
+ unsigned int nperiph;
+ struct clk_hw **phws;
+ unsigned int ngck;
+ struct clk_hw **ghws;
+};
+
struct clk_range {
unsigned long min;
unsigned long max;
@@ -69,6 +80,10 @@ extern const struct clk_programmable_layout at91rm9200_programmable_layout;
extern const struct clk_programmable_layout at91sam9g45_programmable_layout;
extern const struct clk_programmable_layout at91sam9x5_programmable_layout;
+struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ unsigned int nperiph, unsigned int ngck);
+void pmc_data_free(struct pmc_data *pmc_data);
+
int of_at91_get_clk_range(struct device_node *np, const char *propname,
struct clk_range *range);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 08/16] dt-bindings: clk: at91: Document new PMC binding
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Document the new PMC binding with only one PMC node for all the PMC clocks
instead of one node per clock as this proved to be problematic.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
.../devicetree/bindings/clock/at91-clock.txt | 523 +-----------------
1 file changed, 21 insertions(+), 502 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 64fcbea10e12..e9f70fcdfe80 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -4,6 +4,8 @@ This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+Slow Clock controller:
+
Required properties:
- compatible : shall be one of the following:
"atmel,at91sam9x5-sckc" or
@@ -16,84 +18,6 @@ Required properties:
"atmel,at91sam9x5-clk-slow-rc-osc":
at91 internal slow RC oscillator
-
- "atmel,<chip>-pmc":
- at91 PMC (Power Management Controller)
- All at91 specific clocks (clocks defined below) must be child
- node of the PMC node.
- <chip> can be: at91rm9200, at91sam9260, at91sam9261,
- at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
- sama5d2, sama5d3 or sama5d4.
-
- "atmel,at91sam9x5-clk-slow" (under sckc node)
- or
- "atmel,at91sam9260-clk-slow" (under pmc node):
- at91 slow clk
-
- "atmel,at91rm9200-clk-main-osc"
- "atmel,at91sam9x5-clk-main-rc-osc"
- at91 main clk sources
-
- "atmel,at91sam9x5-clk-main"
- "atmel,at91rm9200-clk-main":
- at91 main clock
-
- "atmel,at91rm9200-clk-master" or
- "atmel,at91sam9x5-clk-master":
- at91 master clock
-
- "atmel,at91sam9x5-clk-peripheral" or
- "atmel,at91rm9200-clk-peripheral":
- at91 peripheral clocks
-
- "atmel,at91rm9200-clk-pll" or
- "atmel,at91sam9g45-clk-pll" or
- "atmel,at91sam9g20-clk-pllb" or
- "atmel,sama5d3-clk-pll":
- at91 pll clocks
-
- "atmel,at91sam9x5-clk-plldiv":
- at91 plla divisor
-
- "atmel,at91rm9200-clk-programmable" or
- "atmel,at91sam9g45-clk-programmable" or
- "atmel,at91sam9x5-clk-programmable":
- at91 programmable clocks
-
- "atmel,at91sam9x5-clk-smd":
- at91 SMD (Soft Modem) clock
-
- "atmel,at91rm9200-clk-system":
- at91 system clocks
-
- "atmel,at91rm9200-clk-usb" or
- "atmel,at91sam9x5-clk-usb" or
- "atmel,at91sam9n12-clk-usb":
- at91 usb clock
-
- "atmel,at91sam9x5-clk-utmi":
- at91 utmi clock
-
- "atmel,sama5d4-clk-h32mx":
- at91 h32mx clock
-
- "atmel,sama5d2-clk-generated":
- at91 generated clock
-
- "atmel,sama5d2-clk-audio-pll-frac":
- at91 audio fractional pll
-
- "atmel,sama5d2-clk-audio-pll-pad":
- at91 audio pll CLK_AUDIO output pin
-
- "atmel,sama5d2-clk-audio-pll-pmc"
- at91 audio pll output on AUDIOPLLCLK that feeds the PMC
- and can be used by peripheral clock or generic clock
-
- "atmel,sama5d2-clk-i2s-mux" (under pmc node):
- at91 I2S clock source selection
-
-Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
@@ -109,435 +33,30 @@ For example:
/* put at91 slow clocks here */
};
+Power Management Controller (PMC):
-Required properties for internal slow RC oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for slow oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+Required properties:
+- compatible : shall be "atmel,<chip>-pmc", "syscon":
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
+ at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
+- #clock-cells : from common clock binding; shall be set to 2. The first entry
+ is the type of the clock (core, system, peripheral or generated) and the
+ second entry its index as provided by the datasheet
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names: Must include the following entries: "slow_clk", "main_xtal"
Optional properties:
- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
provided on XIN.
For example:
- slow_osc: slow_osc {
- compatible = "atmel,at91rm9200-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- };
-
-Required properties for slow clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the slow clk sources (see atmel datasheet).
-
-For example:
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
-
-Required properties for PMC node:
-- reg : defines the IO memory reserved for the PMC.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- interrupts : shall be set to PMC interrupt line.
-- interrupt-controller : tell that the PMC is an interrupt controller.
-- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
- and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clock/at91.h.
- 0 (AT91_PMC_MOSCS) -> main oscillator ready
- 1 (AT91_PMC_LOCKA) -> PLL A ready
- 2 (AT91_PMC_LOCKB) -> PLL B ready
- 3 (AT91_PMC_MCKRDY) -> master clock ready
- 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
- 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
- 16 (AT91_PMC_MOSCSELS) -> main oscillator selected
- 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
- 18 (AT91_PMC_CFDEV) -> clock failure detected
-
-For example:
- pmc: pmc@fffffc00 {
- compatible = "atmel,sama5d3-pmc";
- interrupts = <1 4 7>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #address-cells = <1>;
-
- /* put at91 clocks here */
- };
-
-Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
- on XIN.
-
- clock signal is directly provided on XIN pin.
-
-For example:
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_xtal>;
- };
-
-Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main clk sources (see atmel datasheet).
-
-For example:
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
-Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<3>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock sources (see atmel datasheet) phandles.
- e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
-- atmel,clk-output-range : minimum and maximum clock frequency (two u32
- fields).
- e.g. output = <0 133000000>; <=> 0 to 133MHz.
-- atmel,clk-divisors : master clock divisors table (four u32 fields).
- 0 <=> reserved value.
- e.g. divisors = <1 2 4 6>;
-- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
- PRES field as CLOCK_DIV3 (e.g sam9x5).
-
-For example:
- mck: mck {
- compatible = "atmel,at91rm9200-clk-master";
- interrupt-parent = <&pmc>;
- interrupts = <3>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 133000000>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-Required properties for peripheral clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the master clock phandle.
- e.g. clocks = <&mck>;
-- name: device tree node describing a specific peripheral clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields). Only valid on at91sam9x5-clk-peripheral
- compatible IPs.
-
-For example:
- periph: periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #size-cells = <0>;
- #address-cells = <1>;
- clocks = <&mck>;
-
- ssc0_clk {
- #clock-cells = <0>;
- reg = <2>;
- atmel,clk-output-range = <0 133000000>;
- };
-
- usart0_clk {
- #clock-cells = <0>;
- reg = <3>;
- atmel,clk-output-range = <0 66000000>;
- };
- };
-
-
-Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<1>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock phandle.
-- reg : pll id.
- 0 -> PLL A
- 1 -> PLL B
-- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
- fields).
- e.g. input = <1 32000000>; <=> 1 to 32MHz.
-- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
- range description. Sould be set to 2, 3
- or 4.
- * 1st and 2nd cells represent the frequency range (min-max).
- * 3rd cell is optional and represents the OUT field value for the given
- range.
- * 4th cell is optional and represents the ICPLL field (PLLICPR
- register)
-- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
- depending on #atmel,pll-output-range-cells
- property value.
-
-For example:
- plla: pllack {
- compatible = "atmel,at91sam9g45-clk-pll";
- interrupt-parent = <&pmc>;
- interrupts = <1>;
- #clock-cells = <0>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <74500000 800000000 0 0
- 69500000 750000000 1 0
- 64500000 700000000 2 0
- 59500000 650000000 3 0
- 54500000 600000000 0 1
- 49500000 550000000 1 1
- 44500000 500000000 2 1
- 40000000 450000000 3 1>;
- };
-
-Required properties for plldiv clocks (plldiv = pll / 2):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the plla clock phandle.
-
-The pll divisor is equal to 2 and cannot be changed.
-
-For example:
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
-Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the programmable clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-- name: device tree node describing a specific prog clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg : programmable clock id (register offset from PCKx
- register).
- * interrupts : shall be set to "<(8 + id)>".
-
-For example:
- prog: progck {
- compatible = "atmel,at91sam9g45-clk-programmable";
- #size-cells = <0>;
- #address-cells = <1>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <8>;
- };
-
- prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <9>;
- };
- };
-
-
-Required properties for smd clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&plladiv>, <&utmi>;
-
-For example:
- smd: smdck {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
-Required properties for system clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- name: device tree node describing a specific system clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: system clock id (bit position in SCER/SCDR/SCSR registers).
- See Atmel's datasheet to get a full list of system clock ids.
-
-For example:
- system: systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
- };
-
-
-Required properties for usb clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&pllb>;
-- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
- usb clock divisor table.
- e.g. divisors = <1 2 4 0>;
-
-For example:
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- clocks = <&pllb>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-
-Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock source phandle.
-
-For example:
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
-Required properties for 32 bits bus Matrix clock (h32mx clock):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock source phandle.
-
-For example:
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
-Required properties for generated clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the generated clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-- name: device tree node describing a specific generated clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields).
-
-For example:
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
-Required properties for I2S mux clocks:
-- #size-cells : shall be 0 (reg is used to encode I2S bus id).
-- #address-cells : shall be 1 (reg is used to encode I2S bus id).
-- name: device tree node describing a specific mux clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
- peripheral and generated clock; the first phandle shall belong to the
- peripheral clock and the second one shall belong to the generated
- clock; "clock-indices" property can be user to specify
- the correct order.
- * reg: I2S bus id of the corresponding mux clock.
- e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
-
-For example:
- i2s_clkmux {
- compatible = "atmel,sama5d2-clk-i2s-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2s0muxck: i2s0_muxclk {
- clocks = <&i2s0_clk>, <&i2s0_gclk>;
- #clock-cells = <0>;
- reg = <0>;
- };
-
- i2s1muxck: i2s1_muxclk {
- clocks = <&i2s1_clk>, <&i2s1_gclk>;
- #clock-cells = <0>;
- reg = <1>;
- };
+ pmc: pmc@f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 08/16] dt-bindings: clk: at91: Document new PMC binding
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Document the new PMC binding with only one PMC node for all the PMC clocks
instead of one node per clock as this proved to be problematic.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
.../devicetree/bindings/clock/at91-clock.txt | 523 +-----------------
1 file changed, 21 insertions(+), 502 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 64fcbea10e12..e9f70fcdfe80 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -4,6 +4,8 @@ This binding uses the common clock binding[1].
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+Slow Clock controller:
+
Required properties:
- compatible : shall be one of the following:
"atmel,at91sam9x5-sckc" or
@@ -16,84 +18,6 @@ Required properties:
"atmel,at91sam9x5-clk-slow-rc-osc":
at91 internal slow RC oscillator
-
- "atmel,<chip>-pmc":
- at91 PMC (Power Management Controller)
- All at91 specific clocks (clocks defined below) must be child
- node of the PMC node.
- <chip> can be: at91rm9200, at91sam9260, at91sam9261,
- at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
- sama5d2, sama5d3 or sama5d4.
-
- "atmel,at91sam9x5-clk-slow" (under sckc node)
- or
- "atmel,at91sam9260-clk-slow" (under pmc node):
- at91 slow clk
-
- "atmel,at91rm9200-clk-main-osc"
- "atmel,at91sam9x5-clk-main-rc-osc"
- at91 main clk sources
-
- "atmel,at91sam9x5-clk-main"
- "atmel,at91rm9200-clk-main":
- at91 main clock
-
- "atmel,at91rm9200-clk-master" or
- "atmel,at91sam9x5-clk-master":
- at91 master clock
-
- "atmel,at91sam9x5-clk-peripheral" or
- "atmel,at91rm9200-clk-peripheral":
- at91 peripheral clocks
-
- "atmel,at91rm9200-clk-pll" or
- "atmel,at91sam9g45-clk-pll" or
- "atmel,at91sam9g20-clk-pllb" or
- "atmel,sama5d3-clk-pll":
- at91 pll clocks
-
- "atmel,at91sam9x5-clk-plldiv":
- at91 plla divisor
-
- "atmel,at91rm9200-clk-programmable" or
- "atmel,at91sam9g45-clk-programmable" or
- "atmel,at91sam9x5-clk-programmable":
- at91 programmable clocks
-
- "atmel,at91sam9x5-clk-smd":
- at91 SMD (Soft Modem) clock
-
- "atmel,at91rm9200-clk-system":
- at91 system clocks
-
- "atmel,at91rm9200-clk-usb" or
- "atmel,at91sam9x5-clk-usb" or
- "atmel,at91sam9n12-clk-usb":
- at91 usb clock
-
- "atmel,at91sam9x5-clk-utmi":
- at91 utmi clock
-
- "atmel,sama5d4-clk-h32mx":
- at91 h32mx clock
-
- "atmel,sama5d2-clk-generated":
- at91 generated clock
-
- "atmel,sama5d2-clk-audio-pll-frac":
- at91 audio fractional pll
-
- "atmel,sama5d2-clk-audio-pll-pad":
- at91 audio pll CLK_AUDIO output pin
-
- "atmel,sama5d2-clk-audio-pll-pmc"
- at91 audio pll output on AUDIOPLLCLK that feeds the PMC
- and can be used by peripheral clock or generic clock
-
- "atmel,sama5d2-clk-i2s-mux" (under pmc node):
- at91 I2S clock source selection
-
-Required properties for SCKC node:
- reg : defines the IO memory reserved for the SCKC.
- #size-cells : shall be 0 (reg is used to encode clk id).
- #address-cells : shall be 1 (reg is used to encode clk id).
@@ -109,435 +33,30 @@ For example:
/* put at91 slow clocks here */
};
+Power Management Controller (PMC):
-Required properties for internal slow RC oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for slow oscillator:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+Required properties:
+- compatible : shall be "atmel,<chip>-pmc", "syscon":
+ <chip> can be: at91rm9200, at91sam9260, at91sam9261,
+ at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9g15,
+ at91sam9g25, at91sam9g35, at91sam9x25, at91sam9x35, at91sam9x5,
+ sama5d2, sama5d3 or sama5d4.
+- #clock-cells : from common clock binding; shall be set to 2. The first entry
+ is the type of the clock (core, system, peripheral or generated) and the
+ second entry its index as provided by the datasheet
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names: Must include the following entries: "slow_clk", "main_xtal"
Optional properties:
- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
provided on XIN.
For example:
- slow_osc: slow_osc {
- compatible = "atmel,at91rm9200-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- };
-
-Required properties for slow clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the slow clk sources (see atmel datasheet).
-
-For example:
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
-
-Required properties for PMC node:
-- reg : defines the IO memory reserved for the PMC.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- interrupts : shall be set to PMC interrupt line.
-- interrupt-controller : tell that the PMC is an interrupt controller.
-- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
- and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clock/at91.h.
- 0 (AT91_PMC_MOSCS) -> main oscillator ready
- 1 (AT91_PMC_LOCKA) -> PLL A ready
- 2 (AT91_PMC_LOCKB) -> PLL B ready
- 3 (AT91_PMC_MCKRDY) -> master clock ready
- 6 (AT91_PMC_LOCKU) -> UTMI PLL clock ready
- 8 .. 15 (AT91_PMC_PCKRDY(id)) -> programmable clock ready
- 16 (AT91_PMC_MOSCSELS) -> main oscillator selected
- 17 (AT91_PMC_MOSCRCS) -> RC main oscillator stabilized
- 18 (AT91_PMC_CFDEV) -> clock failure detected
-
-For example:
- pmc: pmc at fffffc00 {
- compatible = "atmel,sama5d3-pmc";
- interrupts = <1 4 7>;
- interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
- #address-cells = <1>;
-
- /* put at91 clocks here */
- };
-
-Required properties for main clock internal RC oscillator:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- clock-frequency : define the internal RC oscillator frequency.
-
-Optional properties:
-- clock-accuracy : define the internal RC oscillator accuracy.
-
-For example:
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
-Required properties for main clock oscillator:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main osc source clk sources (see atmel datasheet).
-
-Optional properties:
-- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
- on XIN.
-
- clock signal is directly provided on XIN pin.
-
-For example:
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_xtal>;
- };
-
-Required properties for main clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<0>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall encode the main clk sources (see atmel datasheet).
-
-For example:
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- interrupt-parent = <&pmc>;
- interrupts = <0>;
- #clock-cells = <0>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
-Required properties for master clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<3>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock sources (see atmel datasheet) phandles.
- e.g. "<&ck32k>, <&main>, <&plla>, <&pllb>".
-- atmel,clk-output-range : minimum and maximum clock frequency (two u32
- fields).
- e.g. output = <0 133000000>; <=> 0 to 133MHz.
-- atmel,clk-divisors : master clock divisors table (four u32 fields).
- 0 <=> reserved value.
- e.g. divisors = <1 2 4 6>;
-- atmel,master-clk-have-div3-pres : some SoC use the reserved value 7 in the
- PRES field as CLOCK_DIV3 (e.g sam9x5).
-
-For example:
- mck: mck {
- compatible = "atmel,at91rm9200-clk-master";
- interrupt-parent = <&pmc>;
- interrupts = <3>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 133000000>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-Required properties for peripheral clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the master clock phandle.
- e.g. clocks = <&mck>;
-- name: device tree node describing a specific peripheral clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields). Only valid on at91sam9x5-clk-peripheral
- compatible IPs.
-
-For example:
- periph: periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #size-cells = <0>;
- #address-cells = <1>;
- clocks = <&mck>;
-
- ssc0_clk {
- #clock-cells = <0>;
- reg = <2>;
- atmel,clk-output-range = <0 133000000>;
- };
-
- usart0_clk {
- #clock-cells = <0>;
- reg = <3>;
- atmel,clk-output-range = <0 66000000>;
- };
- };
-
-
-Required properties for pll clocks:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<1>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock phandle.
-- reg : pll id.
- 0 -> PLL A
- 1 -> PLL B
-- atmel,clk-input-range : minimum and maximum source clock frequency (two u32
- fields).
- e.g. input = <1 32000000>; <=> 1 to 32MHz.
-- #atmel,pll-clk-output-range-cells : number of cells reserved for pll output
- range description. Sould be set to 2, 3
- or 4.
- * 1st and 2nd cells represent the frequency range (min-max).
- * 3rd cell is optional and represents the OUT field value for the given
- range.
- * 4th cell is optional and represents the ICPLL field (PLLICPR
- register)
-- atmel,pll-clk-output-ranges : pll output frequency ranges + optional parameter
- depending on #atmel,pll-output-range-cells
- property value.
-
-For example:
- plla: pllack {
- compatible = "atmel,at91sam9g45-clk-pll";
- interrupt-parent = <&pmc>;
- interrupts = <1>;
- #clock-cells = <0>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <74500000 800000000 0 0
- 69500000 750000000 1 0
- 64500000 700000000 2 0
- 59500000 650000000 3 0
- 54500000 600000000 0 1
- 49500000 550000000 1 1
- 44500000 500000000 2 1
- 40000000 450000000 3 1>;
- };
-
-Required properties for plldiv clocks (plldiv = pll / 2):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the plla clock phandle.
-
-The pll divisor is equal to 2 and cannot be changed.
-
-For example:
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
-Required properties for programmable clocks:
-- interrupt-parent : must reference the PMC node.
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the programmable clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-- name: device tree node describing a specific prog clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg : programmable clock id (register offset from PCKx
- register).
- * interrupts : shall be set to "<(8 + id)>".
-
-For example:
- prog: progck {
- compatible = "atmel,at91sam9g45-clk-programmable";
- #size-cells = <0>;
- #address-cells = <1>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <8>;
- };
-
- prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <9>;
- };
- };
-
-
-Required properties for smd clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&plladiv>, <&utmi>;
-
-For example:
- smd: smdck {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
-Required properties for system clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- name: device tree node describing a specific system clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: system clock id (bit position in SCER/SCDR/SCSR registers).
- See Atmel's datasheet to get a full list of system clock ids.
-
-For example:
- system: systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
- };
-
-
-Required properties for usb clock:
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the smd clock source phandles.
- e.g. clocks = <&pllb>;
-- atmel,clk-divisors (only available for "atmel,at91rm9200-clk-usb"):
- usb clock divisor table.
- e.g. divisors = <1 2 4 0>;
-
-For example:
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- usb: usbck {
- compatible = "atmel,at91rm9200-clk-usb";
- #clock-cells = <0>;
- clocks = <&pllb>;
- atmel,clk-divisors = <1 2 4 0>;
- };
-
-
-Required properties for utmi clock:
-- interrupt-parent : must reference the PMC node.
-- interrupts : shall be set to "<AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>".
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the main clock source phandle.
-
-For example:
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
-Required properties for 32 bits bus Matrix clock (h32mx clock):
-- #clock-cells : from common clock binding; shall be set to 0.
-- clocks : shall be the master clock source phandle.
-
-For example:
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
-Required properties for generated clocks:
-- #size-cells : shall be 0 (reg is used to encode clk id).
-- #address-cells : shall be 1 (reg is used to encode clk id).
-- clocks : shall be the generated clock source phandles.
- e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-- name: device tree node describing a specific generated clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * reg: peripheral id. See Atmel's datasheets to get a full
- list of peripheral ids.
- * atmel,clk-output-range : minimum and maximum clock frequency
- (two u32 fields).
-
-For example:
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
-Required properties for I2S mux clocks:
-- #size-cells : shall be 0 (reg is used to encode I2S bus id).
-- #address-cells : shall be 1 (reg is used to encode I2S bus id).
-- name: device tree node describing a specific mux clock.
- * #clock-cells : from common clock binding; shall be set to 0.
- * clocks : shall be the mux clock parent phandles; shall be 2 phandles:
- peripheral and generated clock; the first phandle shall belong to the
- peripheral clock and the second one shall belong to the generated
- clock; "clock-indices" property can be user to specify
- the correct order.
- * reg: I2S bus id of the corresponding mux clock.
- e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
-
-For example:
- i2s_clkmux {
- compatible = "atmel,sama5d2-clk-i2s-mux";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2s0muxck: i2s0_muxclk {
- clocks = <&i2s0_clk>, <&i2s0_gclk>;
- #clock-cells = <0>;
- reg = <0>;
- };
-
- i2s1muxck: i2s1_muxclk {
- clocks = <&i2s1_clk>, <&i2s1_gclk>;
- #clock-cells = <0>;
- reg = <1>;
- };
+ pmc: pmc at f0018000 {
+ compatible = "atmel,sama5d4-pmc", "syscon";
+ reg = <0xf0018000 0x120>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 09/16] clk: at91: add new DT lookup function
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Add a new DT lookup function to lookup for PMC clocks.
Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the
platforms are converted.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/pmc.c | 34 ++++++++++++++++++++++++++++++++
include/dt-bindings/clock/at91.h | 14 +++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0f8b3add1b04..f5697092ec52 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -19,6 +19,8 @@
#include <asm/proc-fns.h>
+#include <dt-bindings/clock/at91.h>
+
#include "pmc.h"
#define PMC_MAX_IDS 128
@@ -47,6 +49,38 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname,
}
EXPORT_SYMBOL_GPL(of_at91_get_clk_range);
+struct clk_hw *of_clk_hw_pmc_get(struct of_phandle_args *clkspec, void *data)
+{
+ unsigned int type = clkspec->args[0];
+ unsigned int idx = clkspec->args[1];
+ struct pmc_data *pmc_data = data;
+
+ switch (type) {
+ case PMC_TYPE_CORE:
+ if (idx >= pmc_data->ncore)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->chws[idx];
+ case PMC_TYPE_SYSTEM:
+ if (idx >= pmc_data->nsystem)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->shws[idx];
+ case PMC_TYPE_PERIPHERAL:
+ if (idx >= pmc_data->nperiph)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->phws[idx];
+ case PMC_TYPE_GCK:
+ if (idx >= pmc_data->ngck)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->ghws[idx];
+ default:
+ break;
+ }
+
+ pr_err("%s: invalid type (%u) or index (%u)\n", __func__, type, idx);
+
+ return ERR_PTR(-EINVAL);
+}
+
void pmc_data_free(struct pmc_data *pmc_data)
{
kfree(pmc_data->chws);
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index ab3ee241d10c..c007adcb5512 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
@@ -9,6 +9,19 @@
#ifndef _DT_BINDINGS_CLK_AT91_H
#define _DT_BINDINGS_CLK_AT91_H
+#define PMC_TYPE_CORE 0
+#define PMC_TYPE_SYSTEM 1
+#define PMC_TYPE_PERIPHERAL 2
+#define PMC_TYPE_GCK 3
+
+#define PMC_MCK 0
+#define PMC_UTMI 1
+#define PMC_MCK2 2
+#define PMC_MAIN 3
+#define PMC_I2S0_MUX 4
+#define PMC_I2S1_MUX 5
+
+#ifndef AT91_PMC_MOSCS
#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
#define AT91_PMC_LOCKA 1 /* PLLA Lock */
#define AT91_PMC_LOCKB 2 /* PLLB Lock */
@@ -19,5 +32,6 @@
#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
#define AT91_PMC_GCKRDY 24 /* Generated Clocks */
+#endif
#endif
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 09/16] clk: at91: add new DT lookup function
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Add a new DT lookup function to lookup for PMC clocks.
Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the
platforms are converted.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/pmc.c | 34 ++++++++++++++++++++++++++++++++
include/dt-bindings/clock/at91.h | 14 +++++++++++++
2 files changed, 48 insertions(+)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 0f8b3add1b04..f5697092ec52 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -19,6 +19,8 @@
#include <asm/proc-fns.h>
+#include <dt-bindings/clock/at91.h>
+
#include "pmc.h"
#define PMC_MAX_IDS 128
@@ -47,6 +49,38 @@ int of_at91_get_clk_range(struct device_node *np, const char *propname,
}
EXPORT_SYMBOL_GPL(of_at91_get_clk_range);
+struct clk_hw *of_clk_hw_pmc_get(struct of_phandle_args *clkspec, void *data)
+{
+ unsigned int type = clkspec->args[0];
+ unsigned int idx = clkspec->args[1];
+ struct pmc_data *pmc_data = data;
+
+ switch (type) {
+ case PMC_TYPE_CORE:
+ if (idx >= pmc_data->ncore)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->chws[idx];
+ case PMC_TYPE_SYSTEM:
+ if (idx >= pmc_data->nsystem)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->shws[idx];
+ case PMC_TYPE_PERIPHERAL:
+ if (idx >= pmc_data->nperiph)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->phws[idx];
+ case PMC_TYPE_GCK:
+ if (idx >= pmc_data->ngck)
+ return ERR_PTR(-EINVAL);
+ return pmc_data->ghws[idx];
+ default:
+ break;
+ }
+
+ pr_err("%s: invalid type (%u) or index (%u)\n", __func__, type, idx);
+
+ return ERR_PTR(-EINVAL);
+}
+
void pmc_data_free(struct pmc_data *pmc_data)
{
kfree(pmc_data->chws);
diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
index ab3ee241d10c..c007adcb5512 100644
--- a/include/dt-bindings/clock/at91.h
+++ b/include/dt-bindings/clock/at91.h
@@ -9,6 +9,19 @@
#ifndef _DT_BINDINGS_CLK_AT91_H
#define _DT_BINDINGS_CLK_AT91_H
+#define PMC_TYPE_CORE 0
+#define PMC_TYPE_SYSTEM 1
+#define PMC_TYPE_PERIPHERAL 2
+#define PMC_TYPE_GCK 3
+
+#define PMC_MCK 0
+#define PMC_UTMI 1
+#define PMC_MCK2 2
+#define PMC_MAIN 3
+#define PMC_I2S0_MUX 4
+#define PMC_I2S1_MUX 5
+
+#ifndef AT91_PMC_MOSCS
#define AT91_PMC_MOSCS 0 /* MOSCS Flag */
#define AT91_PMC_LOCKA 1 /* PLLA Lock */
#define AT91_PMC_LOCKB 2 /* PLLB Lock */
@@ -19,5 +32,6 @@
#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */
#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */
#define AT91_PMC_GCKRDY 24 /* Generated Clocks */
+#endif
#endif
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 10/16] clk: at91: add sama5d4 pmc driver
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Add a driver for the PMC clocks of the sama5d4
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/sama5d4.c | 262 +++++++++++++++++++++++++++++++++++++
2 files changed, 263 insertions(+)
create mode 100644 drivers/clk/at91/sama5d4.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index facc169ebb68..7cdb762f3e2e 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
+obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
new file mode 100644
index 000000000000..b98f14c1e138
--- /dev/null
+++ b/drivers/clk/at91/sama5d4.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 125000000, .max = 200000000 },
+ .divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 12000000, .max = 12000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} sama5d4_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "lcdck", .p = "masterck", .id = 3 },
+ { .n = "smdck", .p = "smdclk", .id = 4 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+ { .n = "pck2", .p = "prog2", .id = 10 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d4_periph32ck[] = {
+ { .n = "pioD_clk", .id = 5 },
+ { .n = "usart0_clk", .id = 6 },
+ { .n = "usart1_clk", .id = 7 },
+ { .n = "icm_clk", .id = 9 },
+ { .n = "aes_clk", .id = 12 },
+ { .n = "tdes_clk", .id = 14 },
+ { .n = "sha_clk", .id = 15 },
+ { .n = "matrix1_clk", .id = 17 },
+ { .n = "hsmc_clk", .id = 22 },
+ { .n = "pioA_clk", .id = 23 },
+ { .n = "pioB_clk", .id = 24 },
+ { .n = "pioC_clk", .id = 25 },
+ { .n = "pioE_clk", .id = 26 },
+ { .n = "uart0_clk", .id = 27 },
+ { .n = "uart1_clk", .id = 28 },
+ { .n = "usart2_clk", .id = 29 },
+ { .n = "usart3_clk", .id = 30 },
+ { .n = "usart4_clk", .id = 31 },
+ { .n = "twi0_clk", .id = 32 },
+ { .n = "twi1_clk", .id = 33 },
+ { .n = "twi2_clk", .id = 34 },
+ { .n = "mci0_clk", .id = 35 },
+ { .n = "mci1_clk", .id = 36 },
+ { .n = "spi0_clk", .id = 37 },
+ { .n = "spi1_clk", .id = 38 },
+ { .n = "spi2_clk", .id = 39 },
+ { .n = "tcb0_clk", .id = 40 },
+ { .n = "tcb1_clk", .id = 41 },
+ { .n = "tcb2_clk", .id = 42 },
+ { .n = "pwm_clk", .id = 43 },
+ { .n = "adc_clk", .id = 44 },
+ { .n = "dbgu_clk", .id = 45 },
+ { .n = "uhphs_clk", .id = 46 },
+ { .n = "udphs_clk", .id = 47 },
+ { .n = "ssc0_clk", .id = 48 },
+ { .n = "ssc1_clk", .id = 49 },
+ { .n = "trng_clk", .id = 53 },
+ { .n = "macb0_clk", .id = 54 },
+ { .n = "macb1_clk", .id = 55 },
+ { .n = "fuse_clk", .id = 57 },
+ { .n = "securam_clk", .id = 59 },
+ { .n = "smd_clk", .id = 61 },
+ { .n = "twi3_clk", .id = 62 },
+ { .n = "catb_clk", .id = 63 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d4_periphck[] = {
+ { .n = "dma0_clk", .id = 8 },
+ { .n = "cpkcc_clk", .id = 10 },
+ { .n = "aesb_clk", .id = 13 },
+ { .n = "mpddr_clk", .id = 16 },
+ { .n = "matrix0_clk", .id = 18 },
+ { .n = "vdec_clk", .id = 19 },
+ { .n = "dma1_clk", .id = 50 },
+ { .n = "lcdc_clk", .id = 51 },
+ { .n = "isi_clk", .id = 52 },
+};
+
+static void __init sama5d4_pmc_setup(struct device_node *np)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *sama5d4_pmc;
+ const char *parent_names[5];
+ struct regmap *regmap;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ sama5d4_pmc = pmc_data_allocate(3, 11, 64, 0);
+ if (!sama5d4_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 100000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &sama5d3_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_MCK] = hw;
+
+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_MCK2] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_systemck); i++) {
+ hw = at91_clk_register_system(regmap, sama5d4_systemck[i].n,
+ sama5d4_systemck[i].p,
+ sama5d4_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->shws[sama5d4_systemck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d4_periphck[i].n,
+ "masterck",
+ sama5d4_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->phws[sama5d4_periphck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_periph32ck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d4_periph32ck[i].n,
+ "h32mxck",
+ sama5d4_periph32ck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->phws[sama5d4_periph32ck[i].id] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d4_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(sama5d4_pmc);
+}
+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 10/16] clk: at91: add sama5d4 pmc driver
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Add a driver for the PMC clocks of the sama5d4
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/sama5d4.c | 262 +++++++++++++++++++++++++++++++++++++
2 files changed, 263 insertions(+)
create mode 100644 drivers/clk/at91/sama5d4.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index facc169ebb68..7cdb762f3e2e 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
+obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
new file mode 100644
index 000000000000..b98f14c1e138
--- /dev/null
+++ b/drivers/clk/at91/sama5d4.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 125000000, .max = 200000000 },
+ .divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 12000000, .max = 12000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} sama5d4_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "lcdck", .p = "masterck", .id = 3 },
+ { .n = "smdck", .p = "smdclk", .id = 4 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+ { .n = "pck2", .p = "prog2", .id = 10 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d4_periph32ck[] = {
+ { .n = "pioD_clk", .id = 5 },
+ { .n = "usart0_clk", .id = 6 },
+ { .n = "usart1_clk", .id = 7 },
+ { .n = "icm_clk", .id = 9 },
+ { .n = "aes_clk", .id = 12 },
+ { .n = "tdes_clk", .id = 14 },
+ { .n = "sha_clk", .id = 15 },
+ { .n = "matrix1_clk", .id = 17 },
+ { .n = "hsmc_clk", .id = 22 },
+ { .n = "pioA_clk", .id = 23 },
+ { .n = "pioB_clk", .id = 24 },
+ { .n = "pioC_clk", .id = 25 },
+ { .n = "pioE_clk", .id = 26 },
+ { .n = "uart0_clk", .id = 27 },
+ { .n = "uart1_clk", .id = 28 },
+ { .n = "usart2_clk", .id = 29 },
+ { .n = "usart3_clk", .id = 30 },
+ { .n = "usart4_clk", .id = 31 },
+ { .n = "twi0_clk", .id = 32 },
+ { .n = "twi1_clk", .id = 33 },
+ { .n = "twi2_clk", .id = 34 },
+ { .n = "mci0_clk", .id = 35 },
+ { .n = "mci1_clk", .id = 36 },
+ { .n = "spi0_clk", .id = 37 },
+ { .n = "spi1_clk", .id = 38 },
+ { .n = "spi2_clk", .id = 39 },
+ { .n = "tcb0_clk", .id = 40 },
+ { .n = "tcb1_clk", .id = 41 },
+ { .n = "tcb2_clk", .id = 42 },
+ { .n = "pwm_clk", .id = 43 },
+ { .n = "adc_clk", .id = 44 },
+ { .n = "dbgu_clk", .id = 45 },
+ { .n = "uhphs_clk", .id = 46 },
+ { .n = "udphs_clk", .id = 47 },
+ { .n = "ssc0_clk", .id = 48 },
+ { .n = "ssc1_clk", .id = 49 },
+ { .n = "trng_clk", .id = 53 },
+ { .n = "macb0_clk", .id = 54 },
+ { .n = "macb1_clk", .id = 55 },
+ { .n = "fuse_clk", .id = 57 },
+ { .n = "securam_clk", .id = 59 },
+ { .n = "smd_clk", .id = 61 },
+ { .n = "twi3_clk", .id = 62 },
+ { .n = "catb_clk", .id = 63 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d4_periphck[] = {
+ { .n = "dma0_clk", .id = 8 },
+ { .n = "cpkcc_clk", .id = 10 },
+ { .n = "aesb_clk", .id = 13 },
+ { .n = "mpddr_clk", .id = 16 },
+ { .n = "matrix0_clk", .id = 18 },
+ { .n = "vdec_clk", .id = 19 },
+ { .n = "dma1_clk", .id = 50 },
+ { .n = "lcdc_clk", .id = 51 },
+ { .n = "isi_clk", .id = 52 },
+};
+
+static void __init sama5d4_pmc_setup(struct device_node *np)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *sama5d4_pmc;
+ const char *parent_names[5];
+ struct regmap *regmap;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ sama5d4_pmc = pmc_data_allocate(3, 11, 64, 0);
+ if (!sama5d4_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 100000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &sama5d3_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_MCK] = hw;
+
+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_MCK2] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_systemck); i++) {
+ hw = at91_clk_register_system(regmap, sama5d4_systemck[i].n,
+ sama5d4_systemck[i].p,
+ sama5d4_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->shws[sama5d4_systemck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d4_periphck[i].n,
+ "masterck",
+ sama5d4_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->phws[sama5d4_periphck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d4_periph32ck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d4_periph32ck[i].n,
+ "h32mxck",
+ sama5d4_periph32ck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->phws[sama5d4_periph32ck[i].id] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d4_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(sama5d4_pmc);
+}
+CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 11/16] clk: at91: add sama5d2 PMC driver
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Add a driver for the PMC clocks of the sama5d2
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/sama5d2.c | 333 +++++++++++++++++++++++++++++++++++++
2 files changed, 334 insertions(+)
create mode 100644 drivers/clk/at91/sama5d2.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 7cdb762f3e2e..1e7c70dda723 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
+obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
new file mode 100644
index 000000000000..62c8c8995430
--- /dev/null
+++ b/drivers/clk/at91/sama5d2.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 124000000, .max = 166000000 },
+ .divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 12000000, .max = 12000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} sama5d2_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "lcdck", .p = "masterck", .id = 3 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+ { .n = "pck2", .p = "prog2", .id = 10 },
+ { .n = "iscck", .p = "masterck", .id = 18 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+ struct clk_range r;
+} sama5d2_periph32ck[] = {
+ { .n = "macb0_clk", .id = 5, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tdes_clk", .id = 11, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "matrix1_clk", .id = 14, },
+ { .n = "hsmc_clk", .id = 17, },
+ { .n = "pioA_clk", .id = 18, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx0_clk", .id = 19, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx1_clk", .id = 20, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx2_clk", .id = 21, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx3_clk", .id = 22, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx4_clk", .id = 23, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart0_clk", .id = 24, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart1_clk", .id = 25, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart2_clk", .id = 26, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart3_clk", .id = 27, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart4_clk", .id = 28, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "twi0_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "twi1_clk", .id = 30, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "spi0_clk", .id = 33, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "spi1_clk", .id = 34, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb0_clk", .id = 35, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb1_clk", .id = 36, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pwm_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "adc_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uhphs_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "udphs_clk", .id = 42, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "ssc0_clk", .id = 43, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "ssc1_clk", .id = 44, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "trng_clk", .id = 47, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pdmic_clk", .id = 48, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "securam_clk", .id = 51, },
+ { .n = "i2s0_clk", .id = 54, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "i2s1_clk", .id = 55, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "can0_clk", .id = 56, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "can1_clk", .id = 57, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "classd_clk", .id = 59, .r = { .min = 0, .max = 83000000 }, },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d2_periphck[] = {
+ { .n = "dma0_clk", .id = 6, },
+ { .n = "dma1_clk", .id = 7, },
+ { .n = "aes_clk", .id = 9, },
+ { .n = "aesb_clk", .id = 10, },
+ { .n = "sha_clk", .id = 12, },
+ { .n = "mpddr_clk", .id = 13, },
+ { .n = "matrix0_clk", .id = 15, },
+ { .n = "sdmmc0_hclk", .id = 31, },
+ { .n = "sdmmc1_hclk", .id = 32, },
+ { .n = "lcdc_clk", .id = 45, },
+ { .n = "isc_clk", .id = 46, },
+ { .n = "qspi0_clk", .id = 52, },
+ { .n = "qspi1_clk", .id = 53, },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+ struct clk_range r;
+ bool pll;
+} sama5d2_gck[] = {
+ { .n = "sdmmc0_gclk", .id = 31, },
+ { .n = "sdmmc1_gclk", .id = 32, },
+ { .n = "tcb0_gclk", .id = 35, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb1_gclk", .id = 36, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pwm_gclk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "isc_gclk", .id = 46, },
+ { .n = "pdmic_gclk", .id = 48, },
+ { .n = "i2s0_gclk", .id = 54, .pll = true },
+ { .n = "i2s1_gclk", .id = 55, .pll = true },
+ { .n = "can0_gclk", .id = 56, .r = { .min = 0, .max = 80000000 }, },
+ { .n = "can1_gclk", .id = 57, .r = { .min = 0, .max = 80000000 }, },
+ { .n = "classd_gclk", .id = 59, .r = { .min = 0, .max = 100000000 },
+ .pll = true },
+};
+
+static void __init sama5d2_pmc_setup(struct device_node *np)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *sama5d2_pmc;
+ const char *parent_names[6];
+ struct regmap *regmap, *regmap_sfr;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ sama5d2_pmc = pmc_data_allocate(6, 19, 60, 60);
+ if (!sama5d2_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 100000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MAIN] = hw;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &sama5d3_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_frac(regmap, "audiopll_fracck",
+ "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_pad(regmap, "audiopll_padck",
+ "audiopll_fracck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, "audiopll_pmcck",
+ "audiopll_fracck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ regmap_sfr = NULL;
+
+ hw = at91_clk_register_utmi(regmap, regmap_sfr, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MCK] = hw;
+
+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MCK2] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_systemck); i++) {
+ hw = at91_clk_register_system(regmap, sama5d2_systemck[i].n,
+ sama5d2_systemck[i].p,
+ sama5d2_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->shws[sama5d2_systemck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d2_periphck[i].n,
+ "masterck",
+ sama5d2_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->phws[sama5d2_periphck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_periph32ck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d2_periph32ck[i].n,
+ "h32mxck",
+ sama5d2_periph32ck[i].id,
+ &sama5d2_periph32ck[i].r);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->phws[sama5d2_periph32ck[i].id] = hw;
+ }
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ parent_names[5] = "audiopll_pmcck";
+ for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) {
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
+ sama5d2_gck[i].n,
+ parent_names, 6,
+ sama5d2_gck[i].id,
+ sama5d2_gck[i].pll,
+ &sama5d2_gck[i].r);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->ghws[sama5d2_gck[i].id] = hw;
+ }
+
+ if (regmap_sfr) {
+ parent_names[0] = "i2s0_clk";
+ parent_names[1] = "i2s0_gclk";
+ hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s0_muxclk",
+ parent_names, 2, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_I2S0_MUX] = hw;
+
+ parent_names[0] = "i2s1_clk";
+ parent_names[1] = "i2s1_gclk";
+ hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s1_muxclk",
+ parent_names, 2, 1);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_I2S1_MUX] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d2_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(sama5d2_pmc);
+}
+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 11/16] clk: at91: add sama5d2 PMC driver
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Add a driver for the PMC clocks of the sama5d2
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/sama5d2.c | 333 +++++++++++++++++++++++++++++++++++++
2 files changed, 334 insertions(+)
create mode 100644 drivers/clk/at91/sama5d2.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 7cdb762f3e2e..1e7c70dda723 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
+obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
new file mode 100644
index 000000000000..62c8c8995430
--- /dev/null
+++ b/drivers/clk/at91/sama5d2.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 124000000, .max = 166000000 },
+ .divisors = { 1, 2, 4, 3 },
+};
+
+static u8 plla_out[] = { 0 };
+
+static u16 plla_icpll[] = { 0 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 600000000, .max = 1200000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 12000000, .max = 12000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} sama5d2_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "lcdck", .p = "masterck", .id = 3 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+ { .n = "pck2", .p = "prog2", .id = 10 },
+ { .n = "iscck", .p = "masterck", .id = 18 },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+ struct clk_range r;
+} sama5d2_periph32ck[] = {
+ { .n = "macb0_clk", .id = 5, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tdes_clk", .id = 11, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "matrix1_clk", .id = 14, },
+ { .n = "hsmc_clk", .id = 17, },
+ { .n = "pioA_clk", .id = 18, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx0_clk", .id = 19, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx1_clk", .id = 20, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx2_clk", .id = 21, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx3_clk", .id = 22, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "flx4_clk", .id = 23, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart0_clk", .id = 24, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart1_clk", .id = 25, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart2_clk", .id = 26, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart3_clk", .id = 27, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uart4_clk", .id = 28, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "twi0_clk", .id = 29, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "twi1_clk", .id = 30, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "spi0_clk", .id = 33, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "spi1_clk", .id = 34, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb0_clk", .id = 35, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb1_clk", .id = 36, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pwm_clk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "adc_clk", .id = 40, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "uhphs_clk", .id = 41, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "udphs_clk", .id = 42, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "ssc0_clk", .id = 43, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "ssc1_clk", .id = 44, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "trng_clk", .id = 47, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pdmic_clk", .id = 48, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "securam_clk", .id = 51, },
+ { .n = "i2s0_clk", .id = 54, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "i2s1_clk", .id = 55, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "can0_clk", .id = 56, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "can1_clk", .id = 57, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "classd_clk", .id = 59, .r = { .min = 0, .max = 83000000 }, },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+} sama5d2_periphck[] = {
+ { .n = "dma0_clk", .id = 6, },
+ { .n = "dma1_clk", .id = 7, },
+ { .n = "aes_clk", .id = 9, },
+ { .n = "aesb_clk", .id = 10, },
+ { .n = "sha_clk", .id = 12, },
+ { .n = "mpddr_clk", .id = 13, },
+ { .n = "matrix0_clk", .id = 15, },
+ { .n = "sdmmc0_hclk", .id = 31, },
+ { .n = "sdmmc1_hclk", .id = 32, },
+ { .n = "lcdc_clk", .id = 45, },
+ { .n = "isc_clk", .id = 46, },
+ { .n = "qspi0_clk", .id = 52, },
+ { .n = "qspi1_clk", .id = 53, },
+};
+
+static const struct {
+ char *n;
+ u8 id;
+ struct clk_range r;
+ bool pll;
+} sama5d2_gck[] = {
+ { .n = "sdmmc0_gclk", .id = 31, },
+ { .n = "sdmmc1_gclk", .id = 32, },
+ { .n = "tcb0_gclk", .id = 35, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "tcb1_gclk", .id = 36, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "pwm_gclk", .id = 38, .r = { .min = 0, .max = 83000000 }, },
+ { .n = "isc_gclk", .id = 46, },
+ { .n = "pdmic_gclk", .id = 48, },
+ { .n = "i2s0_gclk", .id = 54, .pll = true },
+ { .n = "i2s1_gclk", .id = 55, .pll = true },
+ { .n = "can0_gclk", .id = 56, .r = { .min = 0, .max = 80000000 }, },
+ { .n = "can1_gclk", .id = 57, .r = { .min = 0, .max = 80000000 }, },
+ { .n = "classd_gclk", .id = 59, .r = { .min = 0, .max = 100000000 },
+ .pll = true },
+};
+
+static void __init sama5d2_pmc_setup(struct device_node *np)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *sama5d2_pmc;
+ const char *parent_names[6];
+ struct regmap *regmap, *regmap_sfr;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ sama5d2_pmc = pmc_data_allocate(6, 19, 60, 60);
+ if (!sama5d2_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 100000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MAIN] = hw;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &sama5d3_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_frac(regmap, "audiopll_fracck",
+ "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_pad(regmap, "audiopll_padck",
+ "audiopll_fracck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, "audiopll_pmcck",
+ "audiopll_fracck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ regmap_sfr = NULL;
+
+ hw = at91_clk_register_utmi(regmap, regmap_sfr, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MCK] = hw;
+
+ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MCK2] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_systemck); i++) {
+ hw = at91_clk_register_system(regmap, sama5d2_systemck[i].n,
+ sama5d2_systemck[i].p,
+ sama5d2_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->shws[sama5d2_systemck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d2_periphck[i].n,
+ "masterck",
+ sama5d2_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->phws[sama5d2_periphck[i].id] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(sama5d2_periph32ck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ sama5d2_periph32ck[i].n,
+ "h32mxck",
+ sama5d2_periph32ck[i].id,
+ &sama5d2_periph32ck[i].r);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->phws[sama5d2_periph32ck[i].id] = hw;
+ }
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ parent_names[5] = "audiopll_pmcck";
+ for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) {
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
+ sama5d2_gck[i].n,
+ parent_names, 6,
+ sama5d2_gck[i].id,
+ sama5d2_gck[i].pll,
+ &sama5d2_gck[i].r);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->ghws[sama5d2_gck[i].id] = hw;
+ }
+
+ if (regmap_sfr) {
+ parent_names[0] = "i2s0_clk";
+ parent_names[1] = "i2s0_gclk";
+ hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s0_muxclk",
+ parent_names, 2, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_I2S0_MUX] = hw;
+
+ parent_names[0] = "i2s1_clk";
+ parent_names[1] = "i2s1_gclk";
+ hw = at91_clk_i2s_mux_register(regmap_sfr, "i2s1_muxclk",
+ parent_names, 2, 1);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_I2S1_MUX] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d2_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(sama5d2_pmc);
+}
+CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 12/16] clk: at91: add at91sam9x5 PMCs driver
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Add a driver for the PMC clocks of the at91sam9x5 SoCs
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/at91sam9x5.c | 302 ++++++++++++++++++++++++++++++++++
2 files changed, 303 insertions(+)
create mode 100644 drivers/clk/at91/at91sam9x5.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 1e7c70dda723..1802c00b56ca 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9x5.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
new file mode 100644
index 000000000000..f6934ee23724
--- /dev/null
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 133333333 },
+ .divisors = { 1, 2, 4, 3 },
+ .have_div3_pres = 1,
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 745000000, .max = 800000000 },
+ { .min = 695000000, .max = 750000000 },
+ { .min = 645000000, .max = 700000000 },
+ { .min = 595000000, .max = 650000000 },
+ { .min = 545000000, .max = 600000000 },
+ { .min = 495000000, .max = 555000000 },
+ { .min = 445000000, .max = 500000000 },
+ { .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 2000000, .max = 32000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} at91sam9x5_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "smdck", .p = "smdclk", .id = 4 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+};
+
+struct pck {
+ char *n;
+ u8 id;
+};
+
+static const struct pck at91sam9x5_periphck[] = {
+ { .n = "pioAB_clk", .id = 2, },
+ { .n = "pioCD_clk", .id = 3, },
+ { .n = "smd_clk", .id = 4, },
+ { .n = "usart0_clk", .id = 5, },
+ { .n = "usart1_clk", .id = 6, },
+ { .n = "usart2_clk", .id = 7, },
+ { .n = "twi0_clk", .id = 9, },
+ { .n = "twi1_clk", .id = 10, },
+ { .n = "twi2_clk", .id = 11, },
+ { .n = "mci0_clk", .id = 12, },
+ { .n = "spi0_clk", .id = 13, },
+ { .n = "spi1_clk", .id = 14, },
+ { .n = "uart0_clk", .id = 15, },
+ { .n = "uart1_clk", .id = 16, },
+ { .n = "tcb0_clk", .id = 17, },
+ { .n = "pwm_clk", .id = 18, },
+ { .n = "adc_clk", .id = 19, },
+ { .n = "dma0_clk", .id = 20, },
+ { .n = "dma1_clk", .id = 21, },
+ { .n = "uhphs_clk", .id = 22, },
+ { .n = "udphs_clk", .id = 23, },
+ { .n = "mci1_clk", .id = 26, },
+ { .n = "ssc0_clk", .id = 28, },
+};
+
+static const struct pck at91sam9g15_periphck[] = {
+ { .n = "lcdc_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9g25_periphck[] = {
+ { .n = "usart3_clk", .id = 8, },
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "isi_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9g35_periphck[] = {
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "lcdc_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9x25_periphck[] = {
+ { .n = "usart3_clk", .id = 8, },
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "macb1_clk", .id = 27, },
+ { .n = "can0_clk", .id = 29, },
+ { .n = "can1_clk", .id = 30, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9x35_periphck[] = {
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "lcdc_clk", .id = 25, },
+ { .n = "can0_clk", .id = 29, },
+ { .n = "can1_clk", .id = 30, },
+ { /* sentinel */}
+};
+
+static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ const struct pck *extra_pcks,
+ bool has_lcdck)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *at91sam9x5_pmc;
+ const char *parent_names[6];
+ struct regmap *regmap;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ at91sam9x5_pmc = pmc_data_allocate(4, 10, 29, 0);
+ if (!at91sam9x5_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 50000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_MAIN] = hw;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &at91rm9200_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_MCK] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(at91sam9x5_systemck); i++) {
+ hw = at91_clk_register_system(regmap, at91sam9x5_systemck[i].n,
+ at91sam9x5_systemck[i].p,
+ at91sam9x5_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->shws[at91sam9x5_systemck[i].id] = hw;
+ }
+
+ if (has_lcdck) {
+ hw = at91_clk_register_system(regmap, "lcdck", "masterck", 3);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->shws[3] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(at91sam9x5_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ at91sam9x5_periphck[i].n,
+ "masterck",
+ at91sam9x5_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->phws[at91sam9x5_periphck[i].id] = hw;
+ }
+
+ for (i = 0; extra_pcks[i].id; i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ extra_pcks[i].n,
+ "masterck",
+ extra_pcks[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->phws[extra_pcks[i].id] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9x5_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(at91sam9x5_pmc);
+}
+
+static void __init at91sam9g15_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
+
+static void __init at91sam9g25_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
+}
+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
+
+static void __init at91sam9g35_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
+
+static void __init at91sam9x25_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
+}
+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
+
+static void __init at91sam9x35_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 12/16] clk: at91: add at91sam9x5 PMCs driver
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Add a driver for the PMC clocks of the at91sam9x5 SoCs
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 1 +
drivers/clk/at91/at91sam9x5.c | 302 ++++++++++++++++++++++++++++++++++
2 files changed, 303 insertions(+)
create mode 100644 drivers/clk/at91/at91sam9x5.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 1e7c70dda723..1802c00b56ca 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -14,5 +14,6 @@ obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9x5.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
new file mode 100644
index 000000000000..f6934ee23724
--- /dev/null
+++ b/drivers/clk/at91/at91sam9x5.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/at91.h>
+
+#include "pmc.h"
+
+static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 133333333 },
+ .divisors = { 1, 2, 4, 3 },
+ .have_div3_pres = 1,
+};
+
+static u8 plla_out[] = { 0, 1, 2, 3, 0, 1, 2, 3 };
+
+static u16 plla_icpll[] = { 0, 0, 0, 0, 1, 1, 1, 1 };
+
+static struct clk_range plla_outputs[] = {
+ { .min = 745000000, .max = 800000000 },
+ { .min = 695000000, .max = 750000000 },
+ { .min = 645000000, .max = 700000000 },
+ { .min = 595000000, .max = 650000000 },
+ { .min = 545000000, .max = 600000000 },
+ { .min = 495000000, .max = 555000000 },
+ { .min = 445000000, .max = 500000000 },
+ { .min = 400000000, .max = 450000000 },
+};
+
+static const struct clk_pll_characteristics plla_characteristics = {
+ .input = { .min = 2000000, .max = 32000000 },
+ .num_output = ARRAY_SIZE(plla_outputs),
+ .output = plla_outputs,
+ .icpll = plla_icpll,
+ .out = plla_out,
+};
+
+static const struct {
+ char *n;
+ char *p;
+ u8 id;
+} at91sam9x5_systemck[] = {
+ { .n = "ddrck", .p = "masterck", .id = 2 },
+ { .n = "smdck", .p = "smdclk", .id = 4 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+};
+
+struct pck {
+ char *n;
+ u8 id;
+};
+
+static const struct pck at91sam9x5_periphck[] = {
+ { .n = "pioAB_clk", .id = 2, },
+ { .n = "pioCD_clk", .id = 3, },
+ { .n = "smd_clk", .id = 4, },
+ { .n = "usart0_clk", .id = 5, },
+ { .n = "usart1_clk", .id = 6, },
+ { .n = "usart2_clk", .id = 7, },
+ { .n = "twi0_clk", .id = 9, },
+ { .n = "twi1_clk", .id = 10, },
+ { .n = "twi2_clk", .id = 11, },
+ { .n = "mci0_clk", .id = 12, },
+ { .n = "spi0_clk", .id = 13, },
+ { .n = "spi1_clk", .id = 14, },
+ { .n = "uart0_clk", .id = 15, },
+ { .n = "uart1_clk", .id = 16, },
+ { .n = "tcb0_clk", .id = 17, },
+ { .n = "pwm_clk", .id = 18, },
+ { .n = "adc_clk", .id = 19, },
+ { .n = "dma0_clk", .id = 20, },
+ { .n = "dma1_clk", .id = 21, },
+ { .n = "uhphs_clk", .id = 22, },
+ { .n = "udphs_clk", .id = 23, },
+ { .n = "mci1_clk", .id = 26, },
+ { .n = "ssc0_clk", .id = 28, },
+};
+
+static const struct pck at91sam9g15_periphck[] = {
+ { .n = "lcdc_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9g25_periphck[] = {
+ { .n = "usart3_clk", .id = 8, },
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "isi_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9g35_periphck[] = {
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "lcdc_clk", .id = 25, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9x25_periphck[] = {
+ { .n = "usart3_clk", .id = 8, },
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "macb1_clk", .id = 27, },
+ { .n = "can0_clk", .id = 29, },
+ { .n = "can1_clk", .id = 30, },
+ { /* sentinel */}
+};
+
+static const struct pck at91sam9x35_periphck[] = {
+ { .n = "macb0_clk", .id = 24, },
+ { .n = "lcdc_clk", .id = 25, },
+ { .n = "can0_clk", .id = 29, },
+ { .n = "can1_clk", .id = 30, },
+ { /* sentinel */}
+};
+
+static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ const struct pck *extra_pcks,
+ bool has_lcdck)
+{
+ struct clk_range range = CLK_RANGE(0, 0);
+ const char *slck_name, *mainxtal_name;
+ struct pmc_data *at91sam9x5_pmc;
+ const char *parent_names[6];
+ struct regmap *regmap;
+ struct clk_hw *hw;
+ unsigned int i;
+ bool bypass;
+
+ i = of_property_match_string(np, "clock-names", "slow_clk");
+ if (i < 0)
+ return;
+
+ slck_name = of_clk_get_parent_name(np, i);
+
+ i = of_property_match_string(np, "clock-names", "main_xtal");
+ if (i < 0)
+ return;
+ mainxtal_name = of_clk_get_parent_name(np, i);
+
+ regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(regmap))
+ return;
+
+ at91sam9x5_pmc = pmc_data_allocate(4, 10, 29, 0);
+ if (!at91sam9x5_pmc)
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
+ 50000000);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
+ bypass);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = "main_rc_osc";
+ parent_names[1] = "main_osc";
+ hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_MAIN] = hw;
+
+ hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
+ &at91rm9200_pll_layout, &plla_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_UTMI] = hw;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+ &at91sam9x5_master_layout,
+ &mck_characteristics);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->chws[PMC_MCK] = hw;
+
+ parent_names[0] = "plladivck";
+ parent_names[1] = "utmick";
+ hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ parent_names[0] = slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+ parent_names[4] = "mck";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, 5, i,
+ &at91sam9x5_programmable_layout);
+ if (IS_ERR(hw))
+ goto err_free;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(at91sam9x5_systemck); i++) {
+ hw = at91_clk_register_system(regmap, at91sam9x5_systemck[i].n,
+ at91sam9x5_systemck[i].p,
+ at91sam9x5_systemck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->shws[at91sam9x5_systemck[i].id] = hw;
+ }
+
+ if (has_lcdck) {
+ hw = at91_clk_register_system(regmap, "lcdck", "masterck", 3);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->shws[3] = hw;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(at91sam9x5_periphck); i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ at91sam9x5_periphck[i].n,
+ "masterck",
+ at91sam9x5_periphck[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->phws[at91sam9x5_periphck[i].id] = hw;
+ }
+
+ for (i = 0; extra_pcks[i].id; i++) {
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ extra_pcks[i].n,
+ "masterck",
+ extra_pcks[i].id,
+ &range);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ at91sam9x5_pmc->phws[extra_pcks[i].id] = hw;
+ }
+
+ of_clk_add_hw_provider(np, of_clk_hw_pmc_get, at91sam9x5_pmc);
+
+ return;
+
+err_free:
+ pmc_data_free(at91sam9x5_pmc);
+}
+
+static void __init at91sam9g15_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
+
+static void __init at91sam9g25_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
+}
+CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
+
+static void __init at91sam9g35_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
+
+static void __init at91sam9x25_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
+}
+CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
+
+static void __init at91sam9x35_pmc_setup(struct device_node *np)
+{
+ at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
+}
+CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 13/16] clk: at91: move DT compatibility code to its own file
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Move all the DT backward compatibility code to its own file so it can be
deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 2 +-
drivers/clk/at91/clk-audio-pll.c | 70 --
drivers/clk/at91/clk-generated.c | 65 --
drivers/clk/at91/clk-h32mx.c | 22 -
drivers/clk/at91/clk-i2s-mux.c | 38 --
drivers/clk/at91/clk-main.c | 104 ---
drivers/clk/at91/clk-master.c | 82 ---
drivers/clk/at91/clk-peripheral.c | 77 ---
drivers/clk/at91/clk-pll.c | 163 -----
drivers/clk/at91/clk-plldiv.c | 25 -
drivers/clk/at91/clk-programmable.c | 67 --
drivers/clk/at91/clk-slow.c | 30 -
drivers/clk/at91/clk-smd.c | 32 -
drivers/clk/at91/clk-system.c | 37 --
drivers/clk/at91/clk-usb.c | 88 ---
drivers/clk/at91/clk-utmi.c | 43 --
drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++++++++++++
17 files changed, 962 insertions(+), 944 deletions(-)
create mode 100644 drivers/clk/at91/dt-compat.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 1802c00b56ca..da7732afd807 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -3,7 +3,7 @@
# Makefile for at91 specific clk
#
-obj-y += pmc.o sckc.o
+obj-y += pmc.o sckc.o dt-compat.o
obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
obj-y += clk-system.o clk-peripheral.o clk-programmable.o
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index f326023a50a3..96e3c6405351 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -474,26 +474,6 @@ at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
return &frac_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
struct clk_hw * __init
at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
const char *parent_name)
@@ -525,26 +505,6 @@ at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
return &apad_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
struct clk_hw * __init
at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
const char *parent_name)
@@ -575,33 +535,3 @@ at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
return &apmc_ck->hw;
}
-
-static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
- "atmel,sama5d2-clk-audio-pll-frac",
- of_sama5d2_clk_audio_pll_frac_setup);
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
- "atmel,sama5d2-clk-audio-pll-pad",
- of_sama5d2_clk_audio_pll_pad_setup);
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
- "atmel,sama5d2-clk-audio-pll-pmc",
- of_sama5d2_clk_audio_pll_pmc_setup);
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 0fe4d7f04225..66e7f7baf958 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -20,15 +20,8 @@
#include "pmc.h"
-#define PERIPHERAL_MAX 64
-#define PERIPHERAL_ID_MIN 2
-
-#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
-#define GCK_ID_I2S0 54
-#define GCK_ID_I2S1 55
-#define GCK_ID_CLASSD 59
#define GCK_INDEX_DT_AUDIO_PLL 5
struct clk_generated {
@@ -318,61 +311,3 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
return hw;
}
-
-static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
-{
- int num;
- u32 id;
- const char *name;
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[GENERATED_SOURCE_MAX];
- struct device_node *gcknp;
- struct clk_range range = CLK_RANGE(0, 0);
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- num = of_get_child_count(np);
- if (!num || num > PERIPHERAL_MAX)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, gcknp) {
- bool pll_audio = false;
-
- if (of_property_read_u32(gcknp, "reg", &id))
- continue;
-
- if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = gcknp->name;
-
- of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
- &range);
-
- if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
- (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
- id == GCK_ID_CLASSD))
- pll_audio = true;
-
- hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
- parent_names, num_parents,
- id, pll_audio, &range);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(gcknp, of_clk_hw_simple_get, hw);
- }
-}
-CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated",
- of_sama5d2_clk_generated_setup);
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
index a3274648b6c0..f0a2c6baab37 100644
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@@ -115,25 +115,3 @@ at91_clk_register_h32mx(struct regmap *regmap, const char *name,
return &h32mxclk->hw;
}
-
-static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_h32mx(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
- of_sama5d4_clk_h32mx_setup);
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index ed9e96938589..dfdffa5409e6 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -14,8 +14,6 @@
#include <soc/at91/atmel-sfr.h>
-#define I2S_BUS_NR 2
-
struct clk_i2s_mux {
struct clk_hw hw;
struct regmap *regmap;
@@ -78,39 +76,3 @@ at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
return &i2s_ck->hw;
}
-
-static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
-{
- struct regmap *regmap_sfr;
- u8 bus_id;
- const char *parent_names[2];
- struct device_node *i2s_mux_np;
- struct clk_hw *hw;
- int ret;
-
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap_sfr))
- return;
-
- for_each_child_of_node(np, i2s_mux_np) {
- if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
- continue;
-
- if (bus_id > I2S_BUS_NR)
- continue;
-
- ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
- if (ret != 2)
- continue;
-
- hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
- parent_names, 2, bus_id);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw);
- }
-}
-
-CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
- of_sama5d2_clk_i2s_mux_setup);
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 82184009137d..7ac0facdb28b 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -12,7 +12,6 @@
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/delay.h>
-#include <linux/of.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
@@ -171,31 +170,6 @@ at91_clk_register_main_osc(struct regmap *regmap,
return hw;
}
-static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
- bool bypass;
-
- of_property_read_string(np, "clock-output-names", &name);
- bypass = of_property_read_bool(np, "atmel,osc-bypass");
- parent_name = of_clk_get_parent_name(np, 0);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
- of_at91rm9200_clk_main_osc_setup);
-
static bool clk_main_rc_osc_ready(struct regmap *regmap)
{
unsigned int status;
@@ -313,32 +287,6 @@ at91_clk_register_main_rc_osc(struct regmap *regmap,
return hw;
}
-static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- u32 frequency = 0;
- u32 accuracy = 0;
- const char *name = np->name;
- struct regmap *regmap;
-
- of_property_read_string(np, "clock-output-names", &name);
- of_property_read_u32(np, "clock-frequency", &frequency);
- of_property_read_u32(np, "clock-accuracy", &accuracy);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
- of_at91sam9x5_clk_main_rc_osc_setup);
-
-
static int clk_main_probe_frequency(struct regmap *regmap)
{
unsigned long prep_time, timeout;
@@ -442,29 +390,6 @@ at91_clk_register_rm9200_main(struct regmap *regmap,
return hw;
}
-static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
- of_at91rm9200_clk_main_setup);
-
static inline bool clk_sam9x5_main_ready(struct regmap *regmap)
{
unsigned int status;
@@ -583,32 +508,3 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
return hw;
}
-
-static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_names[2];
- unsigned int num_parents;
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > 2)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
- of_at91sam9x5_clk_main_setup);
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index 088044bb6ea2..eb53b4a8fab6 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define MASTER_SOURCE_MAX 4
-
#define MASTER_PRES_MASK 0x7
#define MASTER_PRES_MAX MASTER_PRES_MASK
#define MASTER_DIV_SHIFT 8
@@ -159,83 +157,3 @@ const struct clk_master_layout at91sam9x5_master_layout = {
.mask = 0x373,
.pres_shift = 4,
};
-
-
-static struct clk_master_characteristics * __init
-of_at91_clk_master_get_characteristics(struct device_node *np)
-{
- struct clk_master_characteristics *characteristics;
-
- characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
- if (!characteristics)
- return NULL;
-
- if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
- goto out_free_characteristics;
-
- of_property_read_u32_array(np, "atmel,clk-divisors",
- characteristics->divisors, 4);
-
- characteristics->have_div3_pres =
- of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
-
- return characteristics;
-
-out_free_characteristics:
- kfree(characteristics);
- return NULL;
-}
-
-static void __init
-of_at91_clk_master_setup(struct device_node *np,
- const struct clk_master_layout *layout)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[MASTER_SOURCE_MAX];
- const char *name = np->name;
- struct clk_master_characteristics *characteristics;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- characteristics = of_at91_clk_master_get_characteristics(np);
- if (!characteristics)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_master(regmap, name, num_parents,
- parent_names, layout,
- characteristics);
- if (IS_ERR(hw))
- goto out_free_characteristics;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-
-out_free_characteristics:
- kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
-{
- of_at91_clk_master_setup(np, &at91rm9200_master_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
- of_at91rm9200_clk_master_setup);
-
-static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
-{
- of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
- of_at91sam9x5_clk_master_setup);
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index cb41d06a2481..65c1defa78e4 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -19,11 +19,6 @@
DEFINE_SPINLOCK(pmc_pcr_lock);
-#define PERIPHERAL_MAX 64
-
-#define PERIPHERAL_AT91RM9200 0
-#define PERIPHERAL_AT91SAM9X5 1
-
#define PERIPHERAL_ID_MIN 2
#define PERIPHERAL_ID_MAX 31
#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
@@ -374,75 +369,3 @@ at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
return hw;
}
-
-static void __init
-of_at91_clk_periph_setup(struct device_node *np, u8 type)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- const char *parent_name;
- const char *name;
- struct device_node *periphclknp;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- num = of_get_child_count(np);
- if (!num || num > PERIPHERAL_MAX)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, periphclknp) {
- if (of_property_read_u32(periphclknp, "reg", &id))
- continue;
-
- if (id >= PERIPHERAL_MAX)
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = periphclknp->name;
-
- if (type == PERIPHERAL_AT91RM9200) {
- hw = at91_clk_register_peripheral(regmap, name,
- parent_name, id);
- } else {
- struct clk_range range = CLK_RANGE(0, 0);
-
- of_at91_get_clk_range(periphclknp,
- "atmel,clk-output-range",
- &range);
-
- hw = at91_clk_register_sam9x5_peripheral(regmap,
- &pmc_pcr_lock,
- name,
- parent_name,
- id, &range);
- }
-
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(periphclknp, of_clk_hw_simple_get, hw);
- }
-}
-
-static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
-{
- of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
-}
-CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
- of_at91rm9200_clk_periph_setup);
-
-static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
-{
- of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
- of_at91sam9x5_clk_periph_setup);
-
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 31fff0b9d5c2..f19eed31595a 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -340,166 +340,3 @@ const struct clk_pll_layout sama5d3_pll_layout = {
.mul_shift = 18,
.mul_mask = 0x7F,
};
-
-
-static struct clk_pll_characteristics * __init
-of_at91_clk_pll_get_characteristics(struct device_node *np)
-{
- int i;
- int offset;
- u32 tmp;
- int num_output;
- u32 num_cells;
- struct clk_range input;
- struct clk_range *output;
- u8 *out = NULL;
- u16 *icpll = NULL;
- struct clk_pll_characteristics *characteristics;
-
- if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
- return NULL;
-
- if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
- &num_cells))
- return NULL;
-
- if (num_cells < 2 || num_cells > 4)
- return NULL;
-
- if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
- return NULL;
- num_output = tmp / (sizeof(u32) * num_cells);
-
- characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
- if (!characteristics)
- return NULL;
-
- output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
- if (!output)
- goto out_free_characteristics;
-
- if (num_cells > 2) {
- out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
- if (!out)
- goto out_free_output;
- }
-
- if (num_cells > 3) {
- icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
- if (!icpll)
- goto out_free_output;
- }
-
- for (i = 0; i < num_output; i++) {
- offset = i * num_cells;
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset, &tmp))
- goto out_free_output;
- output[i].min = tmp;
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 1, &tmp))
- goto out_free_output;
- output[i].max = tmp;
-
- if (num_cells == 2)
- continue;
-
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 2, &tmp))
- goto out_free_output;
- out[i] = tmp;
-
- if (num_cells == 3)
- continue;
-
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 3, &tmp))
- goto out_free_output;
- icpll[i] = tmp;
- }
-
- characteristics->input = input;
- characteristics->num_output = num_output;
- characteristics->output = output;
- characteristics->out = out;
- characteristics->icpll = icpll;
- return characteristics;
-
-out_free_output:
- kfree(icpll);
- kfree(out);
- kfree(output);
-out_free_characteristics:
- kfree(characteristics);
- return NULL;
-}
-
-static void __init
-of_at91_clk_pll_setup(struct device_node *np,
- const struct clk_pll_layout *layout)
-{
- u32 id;
- struct clk_hw *hw;
- struct regmap *regmap;
- const char *parent_name;
- const char *name = np->name;
- struct clk_pll_characteristics *characteristics;
-
- if (of_property_read_u32(np, "reg", &id))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- characteristics = of_at91_clk_pll_get_characteristics(np);
- if (!characteristics)
- return;
-
- hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
- characteristics);
- if (IS_ERR(hw))
- goto out_free_characteristics;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-
-out_free_characteristics:
- kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
- of_at91rm9200_clk_pll_setup);
-
-static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout);
-}
-CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll",
- of_at91sam9g45_clk_pll_setup);
-
-static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout);
-}
-CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb",
- of_at91sam9g20_clk_pllb_setup);
-
-static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
-}
-CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
- of_sama5d3_clk_pll_setup);
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
index de803a2b27d3..e8c4f8b02f28 100644
--- a/drivers/clk/at91/clk-plldiv.c
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -106,28 +106,3 @@ at91_clk_register_plldiv(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init
-of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_plldiv(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
- of_at91sam9x5_clk_plldiv_setup);
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
index df302bfa8259..5bc68b9c5498 100644
--- a/drivers/clk/at91/clk-programmable.c
+++ b/drivers/clk/at91/clk-programmable.c
@@ -17,7 +17,6 @@
#include "pmc.h"
-#define PROG_SOURCE_MAX 5
#define PROG_ID_MAX 7
#define PROG_STATUS_MASK(id) (1 << ((id) + 8))
@@ -222,69 +221,3 @@ const struct clk_programmable_layout at91sam9x5_programmable_layout = {
.css_mask = 0x7,
.have_slck_mck = 0,
};
-
-static void __init
-of_at91_clk_prog_setup(struct device_node *np,
- const struct clk_programmable_layout *layout)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[PROG_SOURCE_MAX];
- const char *name;
- struct device_node *progclknp;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- num = of_get_child_count(np);
- if (!num || num > (PROG_ID_MAX + 1))
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, progclknp) {
- if (of_property_read_u32(progclknp, "reg", &id))
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = progclknp->name;
-
- hw = at91_clk_register_programmable(regmap, name,
- parent_names, num_parents,
- id, layout);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(progclknp, of_clk_hw_simple_get, hw);
- }
-}
-
-
-static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
- of_at91rm9200_clk_prog_setup);
-
-static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
- of_at91sam9g45_clk_prog_setup);
-
-static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
- of_at91sam9x5_clk_prog_setup);
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
index a890132db68f..cbb146912f7a 100644
--- a/drivers/clk/at91/clk-slow.c
+++ b/drivers/clk/at91/clk-slow.c
@@ -79,33 +79,3 @@ at91_clk_register_sam9260_slow(struct regmap *regmap,
return hw;
}
-
-static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_names[2];
- unsigned int num_parents;
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents != 2)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
-CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow",
- of_at91sam9260_clk_slow_setup);
diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
index bbf5dc91777f..75679fd8a9c7 100644
--- a/drivers/clk/at91/clk-smd.c
+++ b/drivers/clk/at91/clk-smd.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define SMD_SOURCE_MAX 2
-
#define SMD_DIV_SHIFT 8
#define SMD_MAX_DIV 0xf
@@ -142,33 +140,3 @@ at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[SMD_SOURCE_MAX];
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
- of_at91sam9x5_clk_smd_setup);
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 1ac0144a38c0..47bfca933403 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -123,40 +123,3 @@ at91_clk_register_system(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- const char *name;
- struct device_node *sysclknp;
- const char *parent_name;
- struct regmap *regmap;
-
- num = of_get_child_count(np);
- if (num > (SYSTEM_MAX_ID + 1))
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, sysclknp) {
- if (of_property_read_u32(sysclknp, "reg", &id))
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = sysclknp->name;
-
- parent_name = of_clk_get_parent_name(sysclknp, 0);
-
- hw = at91_clk_register_system(regmap, name, parent_name, id);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(sysclknp, of_clk_hw_simple_get, hw);
- }
-}
-CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
- of_at91rm9200_clk_sys_setup);
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index a728320877dd..79ee1c760f2a 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define USB_SOURCE_MAX 2
-
#define SAM9X5_USB_DIV_SHIFT 8
#define SAM9X5_USB_MAX_DIV 0xf
@@ -374,89 +372,3 @@ at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[USB_SOURCE_MAX];
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
- of_at91sam9x5_clk_usb_setup);
-
-static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
- of_at91sam9n12_clk_usb_setup);
-
-static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- u32 divisors[4] = {0, 0, 0, 0};
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
- if (!divisors[0])
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
- hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
- of_at91rm9200_clk_usb_setup);
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index 6c69b6ac71e1..9a970abf3489 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -157,46 +157,3 @@ at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
return hw;
}
-
-static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap_pmc, *regmap_sfr;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap_pmc))
- return;
-
- /*
- * If the device supports different mainck rates, this value has to be
- * set in the UTMI Clock Trimming register.
- * - 9x5: mainck supports several rates but it is indicated that a
- * 12 MHz is needed in case of USB.
- * - sama5d3 and sama5d2: mainck supports several rates. Configuring
- * the FREQ field of the UTMI Clock Trimming register is mandatory.
- * - sama5d4: mainck is at 12 MHz.
- *
- * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
- */
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
- if (IS_ERR(regmap_sfr)) {
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap_sfr))
- regmap_sfr = NULL;
- }
-
- hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-}
-CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
- of_at91sam9x5_clk_utmi_setup);
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
new file mode 100644
index 000000000000..b95bb4e2a927
--- /dev/null
+++ b/drivers/clk/at91/dt-compat.c
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "pmc.h"
+
+#define MASTER_SOURCE_MAX 4
+
+#define PERIPHERAL_AT91RM9200 0
+#define PERIPHERAL_AT91SAM9X5 1
+
+#define PERIPHERAL_MAX 64
+
+#define PERIPHERAL_ID_MIN 2
+
+#define PROG_SOURCE_MAX 5
+#define PROG_ID_MAX 7
+
+#define SYSTEM_MAX_ID 31
+
+#ifdef CONFIG_HAVE_AT91_AUDIO_PLL
+static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
+ "atmel,sama5d2-clk-audio-pll-frac",
+ of_sama5d2_clk_audio_pll_frac_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
+ "atmel,sama5d2-clk-audio-pll-pad",
+ of_sama5d2_clk_audio_pll_pad_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
+ "atmel,sama5d2-clk-audio-pll-pmc",
+ of_sama5d2_clk_audio_pll_pmc_setup);
+#endif /* CONFIG_HAVE_AT91_AUDIO_PLL */
+
+#ifdef CONFIG_HAVE_AT91_GENERATED_CLK
+#define GENERATED_SOURCE_MAX 6
+
+#define GCK_ID_I2S0 54
+#define GCK_ID_I2S1 55
+#define GCK_ID_CLASSD 59
+
+static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
+{
+ int num;
+ u32 id;
+ const char *name;
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[GENERATED_SOURCE_MAX];
+ struct device_node *gcknp;
+ struct clk_range range = CLK_RANGE(0, 0);
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ num = of_get_child_count(np);
+ if (!num || num > PERIPHERAL_MAX)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, gcknp) {
+ bool pll_audio = false;
+
+ if (of_property_read_u32(gcknp, "reg", &id))
+ continue;
+
+ if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = gcknp->name;
+
+ of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
+ &range);
+
+ if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
+ (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
+ id == GCK_ID_CLASSD))
+ pll_audio = true;
+
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
+ parent_names, num_parents,
+ id, pll_audio, &range);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(gcknp, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated",
+ of_sama5d2_clk_generated_setup);
+#endif /* CONFIG_HAVE_AT91_GENERATED_CLK */
+
+#ifdef CONFIG_HAVE_AT91_H32MX
+static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_h32mx(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
+ of_sama5d4_clk_h32mx_setup);
+#endif /* CONFIG_HAVE_AT91_H32MX */
+
+#ifdef CONFIG_HAVE_AT91_I2S_MUX_CLK
+#define I2S_BUS_NR 2
+
+static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
+{
+ struct regmap *regmap_sfr;
+ u8 bus_id;
+ const char *parent_names[2];
+ struct device_node *i2s_mux_np;
+ struct clk_hw *hw;
+ int ret;
+
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ return;
+
+ for_each_child_of_node(np, i2s_mux_np) {
+ if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
+ continue;
+
+ if (bus_id > I2S_BUS_NR)
+ continue;
+
+ ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
+ if (ret != 2)
+ continue;
+
+ hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
+ parent_names, 2, bus_id);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
+ of_sama5d2_clk_i2s_mux_setup);
+#endif /* CONFIG_HAVE_AT91_I2S_MUX_CLK */
+
+static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+ bool bypass;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
+ of_at91rm9200_clk_main_osc_setup);
+
+static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
+ of_at91sam9x5_clk_main_rc_osc_setup);
+
+static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
+ of_at91rm9200_clk_main_setup);
+
+static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_names[2];
+ unsigned int num_parents;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > 2)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
+ of_at91sam9x5_clk_main_setup);
+
+static struct clk_master_characteristics * __init
+of_at91_clk_master_get_characteristics(struct device_node *np)
+{
+ struct clk_master_characteristics *characteristics;
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
+ goto out_free_characteristics;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors",
+ characteristics->divisors, 4);
+
+ characteristics->have_div3_pres =
+ of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
+
+ return characteristics;
+
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_master_setup(struct device_node *np,
+ const struct clk_master_layout *layout)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[MASTER_SOURCE_MAX];
+ const char *name = np->name;
+ struct clk_master_characteristics *characteristics;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_master_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_master(regmap, name, num_parents,
+ parent_names, layout,
+ characteristics);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
+{
+ of_at91_clk_master_setup(np, &at91rm9200_master_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
+ of_at91rm9200_clk_master_setup);
+
+static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
+{
+ of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
+ of_at91sam9x5_clk_master_setup);
+
+static void __init
+of_at91_clk_periph_setup(struct device_node *np, u8 type)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name;
+ struct device_node *periphclknp;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ num = of_get_child_count(np);
+ if (!num || num > PERIPHERAL_MAX)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, periphclknp) {
+ if (of_property_read_u32(periphclknp, "reg", &id))
+ continue;
+
+ if (id >= PERIPHERAL_MAX)
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = periphclknp->name;
+
+ if (type == PERIPHERAL_AT91RM9200) {
+ hw = at91_clk_register_peripheral(regmap, name,
+ parent_name, id);
+ } else {
+ struct clk_range range = CLK_RANGE(0, 0);
+
+ of_at91_get_clk_range(periphclknp,
+ "atmel,clk-output-range",
+ &range);
+
+ hw = at91_clk_register_sam9x5_peripheral(regmap,
+ &pmc_pcr_lock,
+ name,
+ parent_name,
+ id, &range);
+ }
+
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(periphclknp, of_clk_hw_simple_get, hw);
+ }
+}
+
+static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
+{
+ of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
+}
+CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
+ of_at91rm9200_clk_periph_setup);
+
+static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
+{
+ of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
+ of_at91sam9x5_clk_periph_setup);
+
+static struct clk_pll_characteristics * __init
+of_at91_clk_pll_get_characteristics(struct device_node *np)
+{
+ int i;
+ int offset;
+ u32 tmp;
+ int num_output;
+ u32 num_cells;
+ struct clk_range input;
+ struct clk_range *output;
+ u8 *out = NULL;
+ u16 *icpll = NULL;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
+ return NULL;
+
+ if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
+ &num_cells))
+ return NULL;
+
+ if (num_cells < 2 || num_cells > 4)
+ return NULL;
+
+ if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
+ return NULL;
+ num_output = tmp / (sizeof(u32) * num_cells);
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
+ if (!output)
+ goto out_free_characteristics;
+
+ if (num_cells > 2) {
+ out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
+ if (!out)
+ goto out_free_output;
+ }
+
+ if (num_cells > 3) {
+ icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
+ if (!icpll)
+ goto out_free_output;
+ }
+
+ for (i = 0; i < num_output; i++) {
+ offset = i * num_cells;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset, &tmp))
+ goto out_free_output;
+ output[i].min = tmp;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 1, &tmp))
+ goto out_free_output;
+ output[i].max = tmp;
+
+ if (num_cells == 2)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 2, &tmp))
+ goto out_free_output;
+ out[i] = tmp;
+
+ if (num_cells == 3)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 3, &tmp))
+ goto out_free_output;
+ icpll[i] = tmp;
+ }
+
+ characteristics->input = input;
+ characteristics->num_output = num_output;
+ characteristics->output = output;
+ characteristics->out = out;
+ characteristics->icpll = icpll;
+ return characteristics;
+
+out_free_output:
+ kfree(icpll);
+ kfree(out);
+ kfree(output);
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_pll_setup(struct device_node *np,
+ const struct clk_pll_layout *layout)
+{
+ u32 id;
+ struct clk_hw *hw;
+ struct regmap *regmap;
+ const char *parent_name;
+ const char *name = np->name;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_property_read_u32(np, "reg", &id))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ characteristics = of_at91_clk_pll_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
+ characteristics);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
+ of_at91rm9200_clk_pll_setup);
+
+static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll",
+ of_at91sam9g45_clk_pll_setup);
+
+static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout);
+}
+CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb",
+ of_at91sam9g20_clk_pllb_setup);
+
+static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
+}
+CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
+ of_sama5d3_clk_pll_setup);
+
+static void __init
+of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_plldiv(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
+ of_at91sam9x5_clk_plldiv_setup);
+
+static void __init
+of_at91_clk_prog_setup(struct device_node *np,
+ const struct clk_programmable_layout *layout)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[PROG_SOURCE_MAX];
+ const char *name;
+ struct device_node *progclknp;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ num = of_get_child_count(np);
+ if (!num || num > (PROG_ID_MAX + 1))
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, progclknp) {
+ if (of_property_read_u32(progclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = progclknp->name;
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, num_parents,
+ id, layout);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(progclknp, of_clk_hw_simple_get, hw);
+ }
+}
+
+static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
+ of_at91rm9200_clk_prog_setup);
+
+static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
+ of_at91sam9g45_clk_prog_setup);
+
+static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
+ of_at91sam9x5_clk_prog_setup);
+
+static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_names[2];
+ unsigned int num_parents;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents != 2)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow",
+ of_at91sam9260_clk_slow_setup);
+
+#ifdef CONFIG_HAVE_AT91_SMD
+#define SMD_SOURCE_MAX 2
+
+static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[SMD_SOURCE_MAX];
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
+ of_at91sam9x5_clk_smd_setup);
+#endif /* CONFIG_HAVE_AT91_SMD */
+
+static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ const char *name;
+ struct device_node *sysclknp;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ num = of_get_child_count(np);
+ if (num > (SYSTEM_MAX_ID + 1))
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, sysclknp) {
+ if (of_property_read_u32(sysclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = sysclknp->name;
+
+ parent_name = of_clk_get_parent_name(sysclknp, 0);
+
+ hw = at91_clk_register_system(regmap, name, parent_name, id);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(sysclknp, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
+ of_at91rm9200_clk_sys_setup);
+
+#ifdef CONFIG_HAVE_AT91_USB_CLK
+#define USB_SOURCE_MAX 2
+
+static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[USB_SOURCE_MAX];
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
+ of_at91sam9x5_clk_usb_setup);
+
+static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
+ of_at91sam9n12_clk_usb_setup);
+
+static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 divisors[4] = {0, 0, 0, 0};
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
+ if (!divisors[0])
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+ hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
+ of_at91rm9200_clk_usb_setup);
+#endif /* CONFIG_HAVE_AT91_USB_CLK */
+
+#ifdef CONFIG_HAVE_AT91_UTMI
+static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap_pmc, *regmap_sfr;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap_pmc))
+ return;
+
+ /*
+ * If the device supports different mainck rates, this value has to be
+ * set in the UTMI Clock Trimming register.
+ * - 9x5: mainck supports several rates but it is indicated that a
+ * 12 MHz is needed in case of USB.
+ * - sama5d3 and sama5d2: mainck supports several rates. Configuring
+ * the FREQ field of the UTMI Clock Trimming register is mandatory.
+ * - sama5d4: mainck is at 12 MHz.
+ *
+ * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
+ */
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
+ if (IS_ERR(regmap_sfr)) {
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ regmap_sfr = NULL;
+ }
+
+ hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
+ of_at91sam9x5_clk_utmi_setup);
+#endif /* CONFIG_HAVE_AT91_UTMI */
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 13/16] clk: at91: move DT compatibility code to its own file
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Move all the DT backward compatibility code to its own file so it can be
deleted later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/clk/at91/Makefile | 2 +-
drivers/clk/at91/clk-audio-pll.c | 70 --
drivers/clk/at91/clk-generated.c | 65 --
drivers/clk/at91/clk-h32mx.c | 22 -
drivers/clk/at91/clk-i2s-mux.c | 38 --
drivers/clk/at91/clk-main.c | 104 ---
drivers/clk/at91/clk-master.c | 82 ---
drivers/clk/at91/clk-peripheral.c | 77 ---
drivers/clk/at91/clk-pll.c | 163 -----
drivers/clk/at91/clk-plldiv.c | 25 -
drivers/clk/at91/clk-programmable.c | 67 --
drivers/clk/at91/clk-slow.c | 30 -
drivers/clk/at91/clk-smd.c | 32 -
drivers/clk/at91/clk-system.c | 37 --
drivers/clk/at91/clk-usb.c | 88 ---
drivers/clk/at91/clk-utmi.c | 43 --
drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++++++++++++
17 files changed, 962 insertions(+), 944 deletions(-)
create mode 100644 drivers/clk/at91/dt-compat.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 1802c00b56ca..da7732afd807 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -3,7 +3,7 @@
# Makefile for at91 specific clk
#
-obj-y += pmc.o sckc.o
+obj-y += pmc.o sckc.o dt-compat.o
obj-y += clk-slow.o clk-main.o clk-pll.o clk-plldiv.o clk-master.o
obj-y += clk-system.o clk-peripheral.o clk-programmable.o
diff --git a/drivers/clk/at91/clk-audio-pll.c b/drivers/clk/at91/clk-audio-pll.c
index f326023a50a3..96e3c6405351 100644
--- a/drivers/clk/at91/clk-audio-pll.c
+++ b/drivers/clk/at91/clk-audio-pll.c
@@ -474,26 +474,6 @@ at91_clk_register_audio_pll_frac(struct regmap *regmap, const char *name,
return &frac_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
struct clk_hw * __init
at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
const char *parent_name)
@@ -525,26 +505,6 @@ at91_clk_register_audio_pll_pad(struct regmap *regmap, const char *name,
return &apad_ck->hw;
}
-static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
struct clk_hw * __init
at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
const char *parent_name)
@@ -575,33 +535,3 @@ at91_clk_register_audio_pll_pmc(struct regmap *regmap, const char *name,
return &apmc_ck->hw;
}
-
-static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
- "atmel,sama5d2-clk-audio-pll-frac",
- of_sama5d2_clk_audio_pll_frac_setup);
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
- "atmel,sama5d2-clk-audio-pll-pad",
- of_sama5d2_clk_audio_pll_pad_setup);
-CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
- "atmel,sama5d2-clk-audio-pll-pmc",
- of_sama5d2_clk_audio_pll_pmc_setup);
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 0fe4d7f04225..66e7f7baf958 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -20,15 +20,8 @@
#include "pmc.h"
-#define PERIPHERAL_MAX 64
-#define PERIPHERAL_ID_MIN 2
-
-#define GENERATED_SOURCE_MAX 6
#define GENERATED_MAX_DIV 255
-#define GCK_ID_I2S0 54
-#define GCK_ID_I2S1 55
-#define GCK_ID_CLASSD 59
#define GCK_INDEX_DT_AUDIO_PLL 5
struct clk_generated {
@@ -318,61 +311,3 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
return hw;
}
-
-static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
-{
- int num;
- u32 id;
- const char *name;
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[GENERATED_SOURCE_MAX];
- struct device_node *gcknp;
- struct clk_range range = CLK_RANGE(0, 0);
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- num = of_get_child_count(np);
- if (!num || num > PERIPHERAL_MAX)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, gcknp) {
- bool pll_audio = false;
-
- if (of_property_read_u32(gcknp, "reg", &id))
- continue;
-
- if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = gcknp->name;
-
- of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
- &range);
-
- if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
- (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
- id == GCK_ID_CLASSD))
- pll_audio = true;
-
- hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
- parent_names, num_parents,
- id, pll_audio, &range);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(gcknp, of_clk_hw_simple_get, hw);
- }
-}
-CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated",
- of_sama5d2_clk_generated_setup);
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
index a3274648b6c0..f0a2c6baab37 100644
--- a/drivers/clk/at91/clk-h32mx.c
+++ b/drivers/clk/at91/clk-h32mx.c
@@ -115,25 +115,3 @@ at91_clk_register_h32mx(struct regmap *regmap, const char *name,
return &h32mxclk->hw;
}
-
-static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- hw = at91_clk_register_h32mx(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
- of_sama5d4_clk_h32mx_setup);
diff --git a/drivers/clk/at91/clk-i2s-mux.c b/drivers/clk/at91/clk-i2s-mux.c
index ed9e96938589..dfdffa5409e6 100644
--- a/drivers/clk/at91/clk-i2s-mux.c
+++ b/drivers/clk/at91/clk-i2s-mux.c
@@ -14,8 +14,6 @@
#include <soc/at91/atmel-sfr.h>
-#define I2S_BUS_NR 2
-
struct clk_i2s_mux {
struct clk_hw hw;
struct regmap *regmap;
@@ -78,39 +76,3 @@ at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
return &i2s_ck->hw;
}
-
-static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
-{
- struct regmap *regmap_sfr;
- u8 bus_id;
- const char *parent_names[2];
- struct device_node *i2s_mux_np;
- struct clk_hw *hw;
- int ret;
-
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap_sfr))
- return;
-
- for_each_child_of_node(np, i2s_mux_np) {
- if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
- continue;
-
- if (bus_id > I2S_BUS_NR)
- continue;
-
- ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
- if (ret != 2)
- continue;
-
- hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
- parent_names, 2, bus_id);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw);
- }
-}
-
-CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
- of_sama5d2_clk_i2s_mux_setup);
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index 82184009137d..7ac0facdb28b 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -12,7 +12,6 @@
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/delay.h>
-#include <linux/of.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
@@ -171,31 +170,6 @@ at91_clk_register_main_osc(struct regmap *regmap,
return hw;
}
-static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *name = np->name;
- const char *parent_name;
- struct regmap *regmap;
- bool bypass;
-
- of_property_read_string(np, "clock-output-names", &name);
- bypass = of_property_read_bool(np, "atmel,osc-bypass");
- parent_name = of_clk_get_parent_name(np, 0);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
- of_at91rm9200_clk_main_osc_setup);
-
static bool clk_main_rc_osc_ready(struct regmap *regmap)
{
unsigned int status;
@@ -313,32 +287,6 @@ at91_clk_register_main_rc_osc(struct regmap *regmap,
return hw;
}
-static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- u32 frequency = 0;
- u32 accuracy = 0;
- const char *name = np->name;
- struct regmap *regmap;
-
- of_property_read_string(np, "clock-output-names", &name);
- of_property_read_u32(np, "clock-frequency", &frequency);
- of_property_read_u32(np, "clock-accuracy", &accuracy);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
- of_at91sam9x5_clk_main_rc_osc_setup);
-
-
static int clk_main_probe_frequency(struct regmap *regmap)
{
unsigned long prep_time, timeout;
@@ -442,29 +390,6 @@ at91_clk_register_rm9200_main(struct regmap *regmap,
return hw;
}
-static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
- of_at91rm9200_clk_main_setup);
-
static inline bool clk_sam9x5_main_ready(struct regmap *regmap)
{
unsigned int status;
@@ -583,32 +508,3 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
return hw;
}
-
-static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_names[2];
- unsigned int num_parents;
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > 2)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
- of_at91sam9x5_clk_main_setup);
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index 088044bb6ea2..eb53b4a8fab6 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define MASTER_SOURCE_MAX 4
-
#define MASTER_PRES_MASK 0x7
#define MASTER_PRES_MAX MASTER_PRES_MASK
#define MASTER_DIV_SHIFT 8
@@ -159,83 +157,3 @@ const struct clk_master_layout at91sam9x5_master_layout = {
.mask = 0x373,
.pres_shift = 4,
};
-
-
-static struct clk_master_characteristics * __init
-of_at91_clk_master_get_characteristics(struct device_node *np)
-{
- struct clk_master_characteristics *characteristics;
-
- characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
- if (!characteristics)
- return NULL;
-
- if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
- goto out_free_characteristics;
-
- of_property_read_u32_array(np, "atmel,clk-divisors",
- characteristics->divisors, 4);
-
- characteristics->have_div3_pres =
- of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
-
- return characteristics;
-
-out_free_characteristics:
- kfree(characteristics);
- return NULL;
-}
-
-static void __init
-of_at91_clk_master_setup(struct device_node *np,
- const struct clk_master_layout *layout)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[MASTER_SOURCE_MAX];
- const char *name = np->name;
- struct clk_master_characteristics *characteristics;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- characteristics = of_at91_clk_master_get_characteristics(np);
- if (!characteristics)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_master(regmap, name, num_parents,
- parent_names, layout,
- characteristics);
- if (IS_ERR(hw))
- goto out_free_characteristics;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-
-out_free_characteristics:
- kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
-{
- of_at91_clk_master_setup(np, &at91rm9200_master_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
- of_at91rm9200_clk_master_setup);
-
-static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
-{
- of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
- of_at91sam9x5_clk_master_setup);
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index cb41d06a2481..65c1defa78e4 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -19,11 +19,6 @@
DEFINE_SPINLOCK(pmc_pcr_lock);
-#define PERIPHERAL_MAX 64
-
-#define PERIPHERAL_AT91RM9200 0
-#define PERIPHERAL_AT91SAM9X5 1
-
#define PERIPHERAL_ID_MIN 2
#define PERIPHERAL_ID_MAX 31
#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
@@ -374,75 +369,3 @@ at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
return hw;
}
-
-static void __init
-of_at91_clk_periph_setup(struct device_node *np, u8 type)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- const char *parent_name;
- const char *name;
- struct device_node *periphclknp;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- num = of_get_child_count(np);
- if (!num || num > PERIPHERAL_MAX)
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, periphclknp) {
- if (of_property_read_u32(periphclknp, "reg", &id))
- continue;
-
- if (id >= PERIPHERAL_MAX)
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = periphclknp->name;
-
- if (type == PERIPHERAL_AT91RM9200) {
- hw = at91_clk_register_peripheral(regmap, name,
- parent_name, id);
- } else {
- struct clk_range range = CLK_RANGE(0, 0);
-
- of_at91_get_clk_range(periphclknp,
- "atmel,clk-output-range",
- &range);
-
- hw = at91_clk_register_sam9x5_peripheral(regmap,
- &pmc_pcr_lock,
- name,
- parent_name,
- id, &range);
- }
-
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(periphclknp, of_clk_hw_simple_get, hw);
- }
-}
-
-static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
-{
- of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
-}
-CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
- of_at91rm9200_clk_periph_setup);
-
-static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
-{
- of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
- of_at91sam9x5_clk_periph_setup);
-
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 31fff0b9d5c2..f19eed31595a 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -340,166 +340,3 @@ const struct clk_pll_layout sama5d3_pll_layout = {
.mul_shift = 18,
.mul_mask = 0x7F,
};
-
-
-static struct clk_pll_characteristics * __init
-of_at91_clk_pll_get_characteristics(struct device_node *np)
-{
- int i;
- int offset;
- u32 tmp;
- int num_output;
- u32 num_cells;
- struct clk_range input;
- struct clk_range *output;
- u8 *out = NULL;
- u16 *icpll = NULL;
- struct clk_pll_characteristics *characteristics;
-
- if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
- return NULL;
-
- if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
- &num_cells))
- return NULL;
-
- if (num_cells < 2 || num_cells > 4)
- return NULL;
-
- if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
- return NULL;
- num_output = tmp / (sizeof(u32) * num_cells);
-
- characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
- if (!characteristics)
- return NULL;
-
- output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
- if (!output)
- goto out_free_characteristics;
-
- if (num_cells > 2) {
- out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
- if (!out)
- goto out_free_output;
- }
-
- if (num_cells > 3) {
- icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
- if (!icpll)
- goto out_free_output;
- }
-
- for (i = 0; i < num_output; i++) {
- offset = i * num_cells;
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset, &tmp))
- goto out_free_output;
- output[i].min = tmp;
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 1, &tmp))
- goto out_free_output;
- output[i].max = tmp;
-
- if (num_cells == 2)
- continue;
-
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 2, &tmp))
- goto out_free_output;
- out[i] = tmp;
-
- if (num_cells == 3)
- continue;
-
- if (of_property_read_u32_index(np,
- "atmel,pll-clk-output-ranges",
- offset + 3, &tmp))
- goto out_free_output;
- icpll[i] = tmp;
- }
-
- characteristics->input = input;
- characteristics->num_output = num_output;
- characteristics->output = output;
- characteristics->out = out;
- characteristics->icpll = icpll;
- return characteristics;
-
-out_free_output:
- kfree(icpll);
- kfree(out);
- kfree(output);
-out_free_characteristics:
- kfree(characteristics);
- return NULL;
-}
-
-static void __init
-of_at91_clk_pll_setup(struct device_node *np,
- const struct clk_pll_layout *layout)
-{
- u32 id;
- struct clk_hw *hw;
- struct regmap *regmap;
- const char *parent_name;
- const char *name = np->name;
- struct clk_pll_characteristics *characteristics;
-
- if (of_property_read_u32(np, "reg", &id))
- return;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- characteristics = of_at91_clk_pll_get_characteristics(np);
- if (!characteristics)
- return;
-
- hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
- characteristics);
- if (IS_ERR(hw))
- goto out_free_characteristics;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-
-out_free_characteristics:
- kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
- of_at91rm9200_clk_pll_setup);
-
-static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout);
-}
-CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll",
- of_at91sam9g45_clk_pll_setup);
-
-static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout);
-}
-CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb",
- of_at91sam9g20_clk_pllb_setup);
-
-static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
-{
- of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
-}
-CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
- of_sama5d3_clk_pll_setup);
diff --git a/drivers/clk/at91/clk-plldiv.c b/drivers/clk/at91/clk-plldiv.c
index de803a2b27d3..e8c4f8b02f28 100644
--- a/drivers/clk/at91/clk-plldiv.c
+++ b/drivers/clk/at91/clk-plldiv.c
@@ -106,28 +106,3 @@ at91_clk_register_plldiv(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init
-of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91_clk_register_plldiv(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
- of_at91sam9x5_clk_plldiv_setup);
diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
index df302bfa8259..5bc68b9c5498 100644
--- a/drivers/clk/at91/clk-programmable.c
+++ b/drivers/clk/at91/clk-programmable.c
@@ -17,7 +17,6 @@
#include "pmc.h"
-#define PROG_SOURCE_MAX 5
#define PROG_ID_MAX 7
#define PROG_STATUS_MASK(id) (1 << ((id) + 8))
@@ -222,69 +221,3 @@ const struct clk_programmable_layout at91sam9x5_programmable_layout = {
.css_mask = 0x7,
.have_slck_mck = 0,
};
-
-static void __init
-of_at91_clk_prog_setup(struct device_node *np,
- const struct clk_programmable_layout *layout)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[PROG_SOURCE_MAX];
- const char *name;
- struct device_node *progclknp;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- num = of_get_child_count(np);
- if (!num || num > (PROG_ID_MAX + 1))
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, progclknp) {
- if (of_property_read_u32(progclknp, "reg", &id))
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = progclknp->name;
-
- hw = at91_clk_register_programmable(regmap, name,
- parent_names, num_parents,
- id, layout);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(progclknp, of_clk_hw_simple_get, hw);
- }
-}
-
-
-static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
- of_at91rm9200_clk_prog_setup);
-
-static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
- of_at91sam9g45_clk_prog_setup);
-
-static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
-{
- of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
- of_at91sam9x5_clk_prog_setup);
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
index a890132db68f..cbb146912f7a 100644
--- a/drivers/clk/at91/clk-slow.c
+++ b/drivers/clk/at91/clk-slow.c
@@ -79,33 +79,3 @@ at91_clk_register_sam9260_slow(struct regmap *regmap,
return hw;
}
-
-static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_names[2];
- unsigned int num_parents;
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents != 2)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-
-CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow",
- of_at91sam9260_clk_slow_setup);
diff --git a/drivers/clk/at91/clk-smd.c b/drivers/clk/at91/clk-smd.c
index bbf5dc91777f..75679fd8a9c7 100644
--- a/drivers/clk/at91/clk-smd.c
+++ b/drivers/clk/at91/clk-smd.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define SMD_SOURCE_MAX 2
-
#define SMD_DIV_SHIFT 8
#define SMD_MAX_DIV 0xf
@@ -142,33 +140,3 @@ at91sam9x5_clk_register_smd(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[SMD_SOURCE_MAX];
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
- of_at91sam9x5_clk_smd_setup);
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
index 1ac0144a38c0..47bfca933403 100644
--- a/drivers/clk/at91/clk-system.c
+++ b/drivers/clk/at91/clk-system.c
@@ -123,40 +123,3 @@ at91_clk_register_system(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
-{
- int num;
- u32 id;
- struct clk_hw *hw;
- const char *name;
- struct device_node *sysclknp;
- const char *parent_name;
- struct regmap *regmap;
-
- num = of_get_child_count(np);
- if (num > (SYSTEM_MAX_ID + 1))
- return;
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- for_each_child_of_node(np, sysclknp) {
- if (of_property_read_u32(sysclknp, "reg", &id))
- continue;
-
- if (of_property_read_string(np, "clock-output-names", &name))
- name = sysclknp->name;
-
- parent_name = of_clk_get_parent_name(sysclknp, 0);
-
- hw = at91_clk_register_system(regmap, name, parent_name, id);
- if (IS_ERR(hw))
- continue;
-
- of_clk_add_hw_provider(sysclknp, of_clk_hw_simple_get, hw);
- }
-}
-CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
- of_at91rm9200_clk_sys_setup);
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
index a728320877dd..79ee1c760f2a 100644
--- a/drivers/clk/at91/clk-usb.c
+++ b/drivers/clk/at91/clk-usb.c
@@ -17,8 +17,6 @@
#include "pmc.h"
-#define USB_SOURCE_MAX 2
-
#define SAM9X5_USB_DIV_SHIFT 8
#define SAM9X5_USB_MAX_DIV 0xf
@@ -374,89 +372,3 @@ at91rm9200_clk_register_usb(struct regmap *regmap, const char *name,
return hw;
}
-
-static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- unsigned int num_parents;
- const char *parent_names[USB_SOURCE_MAX];
- const char *name = np->name;
- struct regmap *regmap;
-
- num_parents = of_clk_get_parent_count(np);
- if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
- return;
-
- of_clk_parent_fill(np, parent_names, num_parents);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
- num_parents);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
- of_at91sam9x5_clk_usb_setup);
-
-static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
-
- hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
- of_at91sam9n12_clk_usb_setup);
-
-static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- u32 divisors[4] = {0, 0, 0, 0};
- struct regmap *regmap;
-
- parent_name = of_clk_get_parent_name(np, 0);
- if (!parent_name)
- return;
-
- of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
- if (!divisors[0])
- return;
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap))
- return;
- hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
- of_at91rm9200_clk_usb_setup);
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
index 6c69b6ac71e1..9a970abf3489 100644
--- a/drivers/clk/at91/clk-utmi.c
+++ b/drivers/clk/at91/clk-utmi.c
@@ -157,46 +157,3 @@ at91_clk_register_utmi(struct regmap *regmap_pmc, struct regmap *regmap_sfr,
return hw;
}
-
-static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
-{
- struct clk_hw *hw;
- const char *parent_name;
- const char *name = np->name;
- struct regmap *regmap_pmc, *regmap_sfr;
-
- parent_name = of_clk_get_parent_name(np, 0);
-
- of_property_read_string(np, "clock-output-names", &name);
-
- regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
- if (IS_ERR(regmap_pmc))
- return;
-
- /*
- * If the device supports different mainck rates, this value has to be
- * set in the UTMI Clock Trimming register.
- * - 9x5: mainck supports several rates but it is indicated that a
- * 12 MHz is needed in case of USB.
- * - sama5d3 and sama5d2: mainck supports several rates. Configuring
- * the FREQ field of the UTMI Clock Trimming register is mandatory.
- * - sama5d4: mainck is at 12 MHz.
- *
- * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
- */
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
- if (IS_ERR(regmap_sfr)) {
- regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
- if (IS_ERR(regmap_sfr))
- regmap_sfr = NULL;
- }
-
- hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
- if (IS_ERR(hw))
- return;
-
- of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
- return;
-}
-CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
- of_at91sam9x5_clk_utmi_setup);
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
new file mode 100644
index 000000000000..b95bb4e2a927
--- /dev/null
+++ b/drivers/clk/at91/dt-compat.c
@@ -0,0 +1,961 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/clk-provider.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "pmc.h"
+
+#define MASTER_SOURCE_MAX 4
+
+#define PERIPHERAL_AT91RM9200 0
+#define PERIPHERAL_AT91SAM9X5 1
+
+#define PERIPHERAL_MAX 64
+
+#define PERIPHERAL_ID_MIN 2
+
+#define PROG_SOURCE_MAX 5
+#define PROG_ID_MAX 7
+
+#define SYSTEM_MAX_ID 31
+
+#ifdef CONFIG_HAVE_AT91_AUDIO_PLL
+static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_frac(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_frac_setup,
+ "atmel,sama5d2-clk-audio-pll-frac",
+ of_sama5d2_clk_audio_pll_frac_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pad(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pad_setup,
+ "atmel,sama5d2-clk-audio-pll-pad",
+ of_sama5d2_clk_audio_pll_pad_setup);
+
+static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_audio_pll_pmc(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d2_clk_audio_pll_pmc_setup,
+ "atmel,sama5d2-clk-audio-pll-pmc",
+ of_sama5d2_clk_audio_pll_pmc_setup);
+#endif /* CONFIG_HAVE_AT91_AUDIO_PLL */
+
+#ifdef CONFIG_HAVE_AT91_GENERATED_CLK
+#define GENERATED_SOURCE_MAX 6
+
+#define GCK_ID_I2S0 54
+#define GCK_ID_I2S1 55
+#define GCK_ID_CLASSD 59
+
+static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
+{
+ int num;
+ u32 id;
+ const char *name;
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[GENERATED_SOURCE_MAX];
+ struct device_node *gcknp;
+ struct clk_range range = CLK_RANGE(0, 0);
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > GENERATED_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ num = of_get_child_count(np);
+ if (!num || num > PERIPHERAL_MAX)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, gcknp) {
+ bool pll_audio = false;
+
+ if (of_property_read_u32(gcknp, "reg", &id))
+ continue;
+
+ if (id < PERIPHERAL_ID_MIN || id >= PERIPHERAL_MAX)
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = gcknp->name;
+
+ of_at91_get_clk_range(gcknp, "atmel,clk-output-range",
+ &range);
+
+ if (of_device_is_compatible(np, "atmel,sama5d2-clk-generated") &&
+ (id == GCK_ID_I2S0 || id == GCK_ID_I2S1 ||
+ id == GCK_ID_CLASSD))
+ pll_audio = true;
+
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock, name,
+ parent_names, num_parents,
+ id, pll_audio, &range);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(gcknp, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(of_sama5d2_clk_generated_setup, "atmel,sama5d2-clk-generated",
+ of_sama5d2_clk_generated_setup);
+#endif /* CONFIG_HAVE_AT91_GENERATED_CLK */
+
+#ifdef CONFIG_HAVE_AT91_H32MX
+static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ hw = at91_clk_register_h32mx(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
+ of_sama5d4_clk_h32mx_setup);
+#endif /* CONFIG_HAVE_AT91_H32MX */
+
+#ifdef CONFIG_HAVE_AT91_I2S_MUX_CLK
+#define I2S_BUS_NR 2
+
+static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
+{
+ struct regmap *regmap_sfr;
+ u8 bus_id;
+ const char *parent_names[2];
+ struct device_node *i2s_mux_np;
+ struct clk_hw *hw;
+ int ret;
+
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ return;
+
+ for_each_child_of_node(np, i2s_mux_np) {
+ if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
+ continue;
+
+ if (bus_id > I2S_BUS_NR)
+ continue;
+
+ ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
+ if (ret != 2)
+ continue;
+
+ hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
+ parent_names, 2, bus_id);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
+ of_sama5d2_clk_i2s_mux_setup);
+#endif /* CONFIG_HAVE_AT91_I2S_MUX_CLK */
+
+static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *name = np->name;
+ const char *parent_name;
+ struct regmap *regmap;
+ bool bypass;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
+ of_at91rm9200_clk_main_osc_setup);
+
+static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ u32 frequency = 0;
+ u32 accuracy = 0;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ of_property_read_string(np, "clock-output-names", &name);
+ of_property_read_u32(np, "clock-frequency", &frequency);
+ of_property_read_u32(np, "clock-accuracy", &accuracy);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
+ of_at91sam9x5_clk_main_rc_osc_setup);
+
+static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
+ of_at91rm9200_clk_main_setup);
+
+static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_names[2];
+ unsigned int num_parents;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > 2)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
+ of_at91sam9x5_clk_main_setup);
+
+static struct clk_master_characteristics * __init
+of_at91_clk_master_get_characteristics(struct device_node *np)
+{
+ struct clk_master_characteristics *characteristics;
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
+ goto out_free_characteristics;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors",
+ characteristics->divisors, 4);
+
+ characteristics->have_div3_pres =
+ of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
+
+ return characteristics;
+
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_master_setup(struct device_node *np,
+ const struct clk_master_layout *layout)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[MASTER_SOURCE_MAX];
+ const char *name = np->name;
+ struct clk_master_characteristics *characteristics;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ characteristics = of_at91_clk_master_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_master(regmap, name, num_parents,
+ parent_names, layout,
+ characteristics);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
+{
+ of_at91_clk_master_setup(np, &at91rm9200_master_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
+ of_at91rm9200_clk_master_setup);
+
+static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
+{
+ of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
+ of_at91sam9x5_clk_master_setup);
+
+static void __init
+of_at91_clk_periph_setup(struct device_node *np, u8 type)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name;
+ struct device_node *periphclknp;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ num = of_get_child_count(np);
+ if (!num || num > PERIPHERAL_MAX)
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, periphclknp) {
+ if (of_property_read_u32(periphclknp, "reg", &id))
+ continue;
+
+ if (id >= PERIPHERAL_MAX)
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = periphclknp->name;
+
+ if (type == PERIPHERAL_AT91RM9200) {
+ hw = at91_clk_register_peripheral(regmap, name,
+ parent_name, id);
+ } else {
+ struct clk_range range = CLK_RANGE(0, 0);
+
+ of_at91_get_clk_range(periphclknp,
+ "atmel,clk-output-range",
+ &range);
+
+ hw = at91_clk_register_sam9x5_peripheral(regmap,
+ &pmc_pcr_lock,
+ name,
+ parent_name,
+ id, &range);
+ }
+
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(periphclknp, of_clk_hw_simple_get, hw);
+ }
+}
+
+static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
+{
+ of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
+}
+CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
+ of_at91rm9200_clk_periph_setup);
+
+static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
+{
+ of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
+ of_at91sam9x5_clk_periph_setup);
+
+static struct clk_pll_characteristics * __init
+of_at91_clk_pll_get_characteristics(struct device_node *np)
+{
+ int i;
+ int offset;
+ u32 tmp;
+ int num_output;
+ u32 num_cells;
+ struct clk_range input;
+ struct clk_range *output;
+ u8 *out = NULL;
+ u16 *icpll = NULL;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
+ return NULL;
+
+ if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
+ &num_cells))
+ return NULL;
+
+ if (num_cells < 2 || num_cells > 4)
+ return NULL;
+
+ if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
+ return NULL;
+ num_output = tmp / (sizeof(u32) * num_cells);
+
+ characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
+ if (!characteristics)
+ return NULL;
+
+ output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
+ if (!output)
+ goto out_free_characteristics;
+
+ if (num_cells > 2) {
+ out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
+ if (!out)
+ goto out_free_output;
+ }
+
+ if (num_cells > 3) {
+ icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
+ if (!icpll)
+ goto out_free_output;
+ }
+
+ for (i = 0; i < num_output; i++) {
+ offset = i * num_cells;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset, &tmp))
+ goto out_free_output;
+ output[i].min = tmp;
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 1, &tmp))
+ goto out_free_output;
+ output[i].max = tmp;
+
+ if (num_cells == 2)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 2, &tmp))
+ goto out_free_output;
+ out[i] = tmp;
+
+ if (num_cells == 3)
+ continue;
+
+ if (of_property_read_u32_index(np,
+ "atmel,pll-clk-output-ranges",
+ offset + 3, &tmp))
+ goto out_free_output;
+ icpll[i] = tmp;
+ }
+
+ characteristics->input = input;
+ characteristics->num_output = num_output;
+ characteristics->output = output;
+ characteristics->out = out;
+ characteristics->icpll = icpll;
+ return characteristics;
+
+out_free_output:
+ kfree(icpll);
+ kfree(out);
+ kfree(output);
+out_free_characteristics:
+ kfree(characteristics);
+ return NULL;
+}
+
+static void __init
+of_at91_clk_pll_setup(struct device_node *np,
+ const struct clk_pll_layout *layout)
+{
+ u32 id;
+ struct clk_hw *hw;
+ struct regmap *regmap;
+ const char *parent_name;
+ const char *name = np->name;
+ struct clk_pll_characteristics *characteristics;
+
+ if (of_property_read_u32(np, "reg", &id))
+ return;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ characteristics = of_at91_clk_pll_get_characteristics(np);
+ if (!characteristics)
+ return;
+
+ hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
+ characteristics);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+ return;
+
+out_free_characteristics:
+ kfree(characteristics);
+}
+
+static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
+ of_at91rm9200_clk_pll_setup);
+
+static void __init of_at91sam9g45_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91sam9g45_pll_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_pll, "atmel,at91sam9g45-clk-pll",
+ of_at91sam9g45_clk_pll_setup);
+
+static void __init of_at91sam9g20_clk_pllb_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &at91sam9g20_pllb_layout);
+}
+CLK_OF_DECLARE(at91sam9g20_clk_pllb, "atmel,at91sam9g20-clk-pllb",
+ of_at91sam9g20_clk_pllb_setup);
+
+static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
+{
+ of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
+}
+CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
+ of_sama5d3_clk_pll_setup);
+
+static void __init
+of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91_clk_register_plldiv(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
+ of_at91sam9x5_clk_plldiv_setup);
+
+static void __init
+of_at91_clk_prog_setup(struct device_node *np,
+ const struct clk_programmable_layout *layout)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[PROG_SOURCE_MAX];
+ const char *name;
+ struct device_node *progclknp;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ num = of_get_child_count(np);
+ if (!num || num > (PROG_ID_MAX + 1))
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, progclknp) {
+ if (of_property_read_u32(progclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = progclknp->name;
+
+ hw = at91_clk_register_programmable(regmap, name,
+ parent_names, num_parents,
+ id, layout);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(progclknp, of_clk_hw_simple_get, hw);
+ }
+}
+
+static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
+}
+CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
+ of_at91rm9200_clk_prog_setup);
+
+static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
+ of_at91sam9g45_clk_prog_setup);
+
+static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
+{
+ of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
+ of_at91sam9x5_clk_prog_setup);
+
+static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_names[2];
+ unsigned int num_parents;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents != 2)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ hw = at91_clk_register_sam9260_slow(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9260_clk_slow, "atmel,at91sam9260-clk-slow",
+ of_at91sam9260_clk_slow_setup);
+
+#ifdef CONFIG_HAVE_AT91_SMD
+#define SMD_SOURCE_MAX 2
+
+static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[SMD_SOURCE_MAX];
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
+ of_at91sam9x5_clk_smd_setup);
+#endif /* CONFIG_HAVE_AT91_SMD */
+
+static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
+{
+ int num;
+ u32 id;
+ struct clk_hw *hw;
+ const char *name;
+ struct device_node *sysclknp;
+ const char *parent_name;
+ struct regmap *regmap;
+
+ num = of_get_child_count(np);
+ if (num > (SYSTEM_MAX_ID + 1))
+ return;
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ for_each_child_of_node(np, sysclknp) {
+ if (of_property_read_u32(sysclknp, "reg", &id))
+ continue;
+
+ if (of_property_read_string(np, "clock-output-names", &name))
+ name = sysclknp->name;
+
+ parent_name = of_clk_get_parent_name(sysclknp, 0);
+
+ hw = at91_clk_register_system(regmap, name, parent_name, id);
+ if (IS_ERR(hw))
+ continue;
+
+ of_clk_add_hw_provider(sysclknp, of_clk_hw_simple_get, hw);
+ }
+}
+CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
+ of_at91rm9200_clk_sys_setup);
+
+#ifdef CONFIG_HAVE_AT91_USB_CLK
+#define USB_SOURCE_MAX 2
+
+static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ unsigned int num_parents;
+ const char *parent_names[USB_SOURCE_MAX];
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ num_parents = of_clk_get_parent_count(np);
+ if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
+ return;
+
+ of_clk_parent_fill(np, parent_names, num_parents);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
+ num_parents);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
+ of_at91sam9x5_clk_usb_setup);
+
+static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+
+ hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
+ of_at91sam9n12_clk_usb_setup);
+
+static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ u32 divisors[4] = {0, 0, 0, 0};
+ struct regmap *regmap;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+ if (!parent_name)
+ return;
+
+ of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
+ if (!divisors[0])
+ return;
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap))
+ return;
+ hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
+ of_at91rm9200_clk_usb_setup);
+#endif /* CONFIG_HAVE_AT91_USB_CLK */
+
+#ifdef CONFIG_HAVE_AT91_UTMI
+static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
+{
+ struct clk_hw *hw;
+ const char *parent_name;
+ const char *name = np->name;
+ struct regmap *regmap_pmc, *regmap_sfr;
+
+ parent_name = of_clk_get_parent_name(np, 0);
+
+ of_property_read_string(np, "clock-output-names", &name);
+
+ regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
+ if (IS_ERR(regmap_pmc))
+ return;
+
+ /*
+ * If the device supports different mainck rates, this value has to be
+ * set in the UTMI Clock Trimming register.
+ * - 9x5: mainck supports several rates but it is indicated that a
+ * 12 MHz is needed in case of USB.
+ * - sama5d3 and sama5d2: mainck supports several rates. Configuring
+ * the FREQ field of the UTMI Clock Trimming register is mandatory.
+ * - sama5d4: mainck is at 12 MHz.
+ *
+ * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
+ */
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
+ if (IS_ERR(regmap_sfr)) {
+ regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap_sfr))
+ regmap_sfr = NULL;
+ }
+
+ hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
+ of_at91sam9x5_clk_utmi_setup);
+#endif /* CONFIG_HAVE_AT91_UTMI */
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 14/16] ARM: dts: at91: sama5d4: switch to new clock bindings
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Switch sama5d4 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 535 +++------------------------
2 files changed, 49 insertions(+), 488 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 0702a2f2b336..12d5af938aa3 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -115,7 +115,7 @@
wm8904: codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck2>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 10>;
clock-names = "mclk";
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 92a35a1942b6..107a704514e0 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -137,7 +137,7 @@
reg = <0x00400000 0x100000
0xfc02c000 0x4000>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -264,7 +264,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -273,7 +273,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -297,7 +297,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x8000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -327,7 +327,7 @@
compatible = "atmel,sama5d4-hlcdc";
reg = <0xf0000000 0x4000>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -356,7 +356,7 @@
reg = <0xf0004000 0x200>;
interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
clock-names = "dma_clk";
};
@@ -366,7 +366,7 @@
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
clock-names = "isi_clk";
status = "disabled";
port {
@@ -378,7 +378,7 @@
ramc0: ramc@f0010000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf0010000 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "ddrck", "mpddr";
};
@@ -387,7 +387,7 @@
reg = <0xf0014000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "dma_clk";
};
@@ -395,448 +395,9 @@
compatible = "atmel,sama5d4-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <100000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <12000000 12000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <125000000 200000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
- };
-
- periph32ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&h32ck>;
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- icm_clk: icm_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- matrix1_clk: matrix1_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
-
- pioE_clk: pioE_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
-
- usart4_clk: usart4_clk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- twi0_clk: twi0_clk {
- reg = <32>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <33>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <34>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <35>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <36>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <37>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <38>;
- };
-
- spi2_clk: spi2_clk {
- #clock-cells = <0>;
- reg = <39>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <40>;
- };
-
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <41>;
- };
-
- tcb2_clk: tcb2_clk {
- #clock-cells = <0>;
- reg = <42>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <43>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <44>;
- };
-
- dbgu_clk: dbgu_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <47>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <49>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <53>;
- };
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <54>;
- };
-
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <55>;
- };
-
- fuse_clk: fuse_clk {
- #clock-cells = <0>;
- reg = <57>;
- };
-
- securam_clk: securam_clk {
- #clock-cells = <0>;
- reg = <59>;
- };
-
- smd_clk: smd_clk {
- #clock-cells = <0>;
- reg = <61>;
- };
-
- twi3_clk: twi3_clk {
- #clock-cells = <0>;
- reg = <62>;
- };
-
- catb_clk: catb_clk {
- #clock-cells = <0>;
- reg = <63>;
- };
- };
-
- periph64ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- cpkcc_clk: cpkcc_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- aesb_clk: aesb_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- matrix0_clk: matrix0_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- vdec_clk: vdec_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <50>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <51>;
- };
-
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <52>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
mmc0: mmc@f8000000 {
@@ -852,7 +413,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
clock-names = "mci_clk";
};
@@ -869,7 +430,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
@@ -887,7 +448,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
clock-names = "pclk";
status = "disabled";
};
@@ -897,7 +458,7 @@
reg = <0xf800c000 0x300>;
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
status = "disabled";
};
@@ -916,7 +477,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -936,7 +497,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
status = "disabled";
};
@@ -955,7 +516,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
status = "disabled";
};
@@ -965,7 +526,7 @@
#size-cells = <0>;
reg = <0xf801c000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -977,7 +538,7 @@
pinctrl-0 = <&pinctrl_macb0_rmii>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -997,7 +558,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
status = "disabled";
};
@@ -1019,7 +580,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -1037,7 +598,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -1055,7 +616,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
clock-names = "mci_clk";
};
@@ -1072,7 +633,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
@@ -1090,7 +651,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "usart";
status = "disabled";
};
@@ -1108,7 +669,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "usart";
status = "disabled";
};
@@ -1126,7 +687,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart4>;
- clocks = <&usart4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
clock-names = "usart";
status = "disabled";
};
@@ -1144,7 +705,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "pclk";
status = "disabled";
};
@@ -1164,7 +725,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1184,7 +745,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- clocks = <&spi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1195,7 +756,7 @@
#size-cells = <0>;
reg = <0xfc020000 0x100>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1205,7 +766,7 @@
#size-cells = <0>;
reg = <0xfc024000 0x100>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb2_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1217,7 +778,7 @@
pinctrl-0 = <&pinctrl_macb1_rmii>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1226,14 +787,14 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc030000 0x100>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
};
adc0: adc@fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0x01f>;
@@ -1276,7 +837,7 @@
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "aes_clk";
status = "okay";
};
@@ -1290,7 +851,7 @@
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(43))>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "tdes_clk";
status = "okay";
};
@@ -1302,7 +863,7 @@
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "sha_clk";
status = "okay";
};
@@ -1311,7 +872,7 @@
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
reg = <0xfc05c000 0x1000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1339,7 +900,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&h32ck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog@fc068640 {
@@ -1370,7 +931,7 @@
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&dbgu_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
clock-names = "usart";
status = "disabled";
};
@@ -1400,7 +961,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
};
pioB: gpio@fc06b000 {
@@ -1411,7 +972,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
};
pioC: gpio@fc06c000 {
@@ -1422,7 +983,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
};
pioD: gpio@fc068000 {
@@ -1433,7 +994,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
pioE: gpio@fc06d000 {
@@ -1444,7 +1005,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
};
/* pinctrl pin settings */
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 14/16] ARM: dts: at91: sama5d4: switch to new clock bindings
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Switch sama5d4 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91-sama5d4ek.dts | 2 +-
arch/arm/boot/dts/sama5d4.dtsi | 535 +++------------------------
2 files changed, 49 insertions(+), 488 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 0702a2f2b336..12d5af938aa3 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -115,7 +115,7 @@
wm8904: codec at 1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck2>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 10>;
clock-names = "mclk";
};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 92a35a1942b6..107a704514e0 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -137,7 +137,7 @@
reg = <0x00400000 0x100000
0xfc02c000 0x4000>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -264,7 +264,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -273,7 +273,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00600000 0x100000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 46>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -297,7 +297,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x8000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -327,7 +327,7 @@
compatible = "atmel,sama5d4-hlcdc";
reg = <0xf0000000 0x4000>;
interrupts = <51 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -356,7 +356,7 @@
reg = <0xf0004000 0x200>;
interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 50>;
clock-names = "dma_clk";
};
@@ -366,7 +366,7 @@
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
clock-names = "isi_clk";
status = "disabled";
port {
@@ -378,7 +378,7 @@
ramc0: ramc at f0010000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf0010000 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "ddrck", "mpddr";
};
@@ -387,7 +387,7 @@
reg = <0xf0014000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "dma_clk";
};
@@ -395,448 +395,9 @@
compatible = "atmel,sama5d4-pmc", "syscon";
reg = <0xf0018000 0x120>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <100000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <12000000 12000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <125000000 200000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
- };
-
- periph32ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&h32ck>;
-
- pioD_clk: pioD_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- icm_clk: icm_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- matrix1_clk: matrix1_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
-
- pioE_clk: pioE_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
-
- usart4_clk: usart4_clk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- twi0_clk: twi0_clk {
- reg = <32>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <33>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <34>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <35>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <36>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <37>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <38>;
- };
-
- spi2_clk: spi2_clk {
- #clock-cells = <0>;
- reg = <39>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <40>;
- };
-
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <41>;
- };
-
- tcb2_clk: tcb2_clk {
- #clock-cells = <0>;
- reg = <42>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <43>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <44>;
- };
-
- dbgu_clk: dbgu_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <47>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <49>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <53>;
- };
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <54>;
- };
-
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <55>;
- };
-
- fuse_clk: fuse_clk {
- #clock-cells = <0>;
- reg = <57>;
- };
-
- securam_clk: securam_clk {
- #clock-cells = <0>;
- reg = <59>;
- };
-
- smd_clk: smd_clk {
- #clock-cells = <0>;
- reg = <61>;
- };
-
- twi3_clk: twi3_clk {
- #clock-cells = <0>;
- reg = <62>;
- };
-
- catb_clk: catb_clk {
- #clock-cells = <0>;
- reg = <63>;
- };
- };
-
- periph64ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- cpkcc_clk: cpkcc_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- aesb_clk: aesb_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- matrix0_clk: matrix0_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- vdec_clk: vdec_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <50>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <51>;
- };
-
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <52>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
mmc0: mmc at f8000000 {
@@ -852,7 +413,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>;
clock-names = "mci_clk";
};
@@ -869,7 +430,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
@@ -887,7 +448,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
clock-names = "pclk";
status = "disabled";
};
@@ -897,7 +458,7 @@
reg = <0xf800c000 0x300>;
interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
status = "disabled";
};
@@ -916,7 +477,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -936,7 +497,7 @@
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
status = "disabled";
};
@@ -955,7 +516,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
status = "disabled";
};
@@ -965,7 +526,7 @@
#size-cells = <0>;
reg = <0xf801c000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -977,7 +538,7 @@
pinctrl-0 = <&pinctrl_macb0_rmii>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_PERIPHERAL 54>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -997,7 +558,7 @@
pinctrl-0 = <&pinctrl_i2c2>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
status = "disabled";
};
@@ -1019,7 +580,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -1037,7 +598,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -1055,7 +616,7 @@
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>;
clock-names = "mci_clk";
};
@@ -1072,7 +633,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
@@ -1090,7 +651,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "usart";
status = "disabled";
};
@@ -1108,7 +669,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "usart";
status = "disabled";
};
@@ -1126,7 +687,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart4>;
- clocks = <&usart4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
clock-names = "usart";
status = "disabled";
};
@@ -1144,7 +705,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "pclk";
status = "disabled";
};
@@ -1164,7 +725,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1184,7 +745,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
- clocks = <&spi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1195,7 +756,7 @@
#size-cells = <0>;
reg = <0xfc020000 0x100>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1205,7 +766,7 @@
#size-cells = <0>;
reg = <0xfc024000 0x100>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb2_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1217,7 +778,7 @@
pinctrl-0 = <&pinctrl_macb1_rmii>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_PERIPHERAL 55>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1226,14 +787,14 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc030000 0x100>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
};
adc0: adc at fc034000 {
compatible = "atmel,at91sam9x5-adc";
reg = <0xfc034000 0x100>;
interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0x01f>;
@@ -1276,7 +837,7 @@
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "aes_clk";
status = "okay";
};
@@ -1290,7 +851,7 @@
<&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(43))>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "tdes_clk";
status = "okay";
};
@@ -1302,7 +863,7 @@
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "sha_clk";
status = "okay";
};
@@ -1311,7 +872,7 @@
compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
reg = <0xfc05c000 0x1000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1339,7 +900,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&h32ck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog at fc068640 {
@@ -1370,7 +931,7 @@
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&dbgu_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
clock-names = "usart";
status = "disabled";
};
@@ -1400,7 +961,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
};
pioB: gpio at fc06b000 {
@@ -1411,7 +972,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
};
pioC: gpio at fc06c000 {
@@ -1422,7 +983,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
};
pioD: gpio at fc068000 {
@@ -1433,7 +994,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
pioE: gpio at fc06d000 {
@@ -1444,7 +1005,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
};
/* pinctrl pin settings */
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 15/16] ARM: dts: at91: sama5d2: switch to new binding
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Switch sama5d2 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 ++------------------
4 files changed, 64 insertions(+), 596 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index e86e0c00eb6b..2b0ddabe4178 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -165,7 +165,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
@@ -211,7 +211,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -223,7 +223,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -240,7 +240,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
@@ -252,7 +252,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
@@ -268,7 +268,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index b10dccd0958f..835ff9b715c7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -196,7 +196,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..7546116b3b64 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -258,7 +258,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
@@ -307,7 +307,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..6c70a928defb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -81,7 +81,7 @@
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x740000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -96,7 +96,7 @@
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x73C000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -148,7 +148,7 @@
reg = <0x00300000 0x100000
0xfc02c000 0x400>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -275,7 +275,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -284,7 +284,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -308,7 +308,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -356,7 +356,7 @@
/* NFC SRAM banks */
0x00100000 0x00100000
>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
atmel,write-by-sram;
};
};
@@ -365,7 +365,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -374,7 +374,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xb0000000 0x300>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -394,7 +394,7 @@
compatible = "atmel,sama5d2-hlcdc";
reg = <0xf0000000 0x2000>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -420,7 +420,7 @@
compatible = "atmel,sama5d2-isc";
reg = <0xf0008000 0x4000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
clock-names = "hclock", "iscck", "gck";
#clock-cells = <0>;
clock-output-names = "isc-mck";
@@ -430,7 +430,7 @@
ramc0: ramc@f000c000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf000c000 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "ddrck", "mpddr";
};
@@ -439,7 +439,7 @@
reg = <0xf0010000 0x1000>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "dma_clk";
};
@@ -449,7 +449,7 @@
reg = <0xf0004000 0x1000>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "dma_clk";
};
@@ -457,541 +457,9 @@
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <100000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <12000000 12000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- audio_pll_frac: audiopll_fracck {
- compatible = "atmel,sama5d2-clk-audio-pll-frac";
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
- audio_pll_pad: audiopll_padck {
- compatible = "atmel,sama5d2-clk-audio-pll-pad";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- audio_pll_pmc: audiopll_pmcck {
- compatible = "atmel,sama5d2-clk-audio-pll-pmc";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <124000000 166000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- iscck: iscck {
- #clock-cells = <0>;
- reg = <18>;
- clocks = <&mck>;
- };
- };
-
- periph32ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&h32ck>;
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <5>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <11>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- matrix1_clk: matrix1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <18>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx0_clk: flx0_clk {
- #clock-cells = <0>;
- reg = <19>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx1_clk: flx1_clk {
- #clock-cells = <0>;
- reg = <20>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx2_clk: flx2_clk {
- #clock-cells = <0>;
- reg = <21>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx3_clk: flx3_clk {
- #clock-cells = <0>;
- reg = <22>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx4_clk: flx4_clk {
- #clock-cells = <0>;
- reg = <23>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <24>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <25>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart2_clk: uart2_clk {
- #clock-cells = <0>;
- reg = <26>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart3_clk: uart3_clk {
- #clock-cells = <0>;
- reg = <27>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart4_clk: uart4_clk {
- #clock-cells = <0>;
- reg = <28>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi0_clk: twi0_clk {
- reg = <29>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <30>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <33>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <34>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <40>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <41>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <42>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <43>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <44>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <47>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pdmic_clk: pdmic_clk {
- #clock-cells = <0>;
- reg = <48>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- securam_clk: securam_clk {
- #clock-cells = <0>;
- reg = <51>;
- };
-
- i2s0_clk: i2s0_clk {
- #clock-cells = <0>;
- reg = <54>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- i2s1_clk: i2s1_clk {
- #clock-cells = <0>;
- reg = <55>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- classd_clk: classd_clk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
- periph64ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- aesb_clk: aesb_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- matrix0_clk: matrix0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- sdmmc0_hclk: sdmmc0_hclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_hclk: sdmmc1_hclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- isc_clk: isc_clk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- qspi0_clk: qspi0_clk {
- #clock-cells = <0>;
- reg = <52>;
- };
-
- qspi1_clk: qspi1_clk {
- #clock-cells = <0>;
- reg = <53>;
- };
- };
-
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- sdmmc0_gclk: sdmmc0_gclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_gclk: sdmmc1_gclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_gclk: tcb1_gclk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- isc_gclk: isc_gclk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- pdmic_gclk: pdmic_gclk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- i2s0_gclk: i2s0_gclk {
- #clock-cells = <0>;
- reg = <54>;
- };
-
- i2s1_gclk: i2s1_gclk {
- #clock-cells = <0>;
- reg = <55>;
- };
-
- can0_gclk: can0_gclk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- can1_gclk: can1_gclk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- classd_gclk: classd_gclk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 100000000>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
qspi0: spi@f0020000 {
@@ -999,7 +467,7 @@
reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1010,7 +478,7 @@
reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1024,7 +492,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(30))>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "sha_clk";
status = "okay";
};
@@ -1040,7 +508,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "aes_clk";
status = "okay";
};
@@ -1056,7 +524,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1075,7 +543,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(22))>;
dma-names = "tx", "rx";
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "pclk";
status = "disabled";
};
@@ -1088,7 +556,7 @@
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1099,7 +567,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1109,7 +577,7 @@
#size-cells = <0>;
reg = <0xf8010000 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1117,7 +585,7 @@
compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1137,7 +605,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(50))>;
dma-names = "rx";
- clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1153,7 +621,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(36))>;
dma-names = "tx", "rx";
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "usart";
status = "disabled";
};
@@ -1169,7 +637,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(38))>;
dma-names = "tx", "rx";
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "usart";
status = "disabled";
};
@@ -1185,7 +653,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
- clocks = <&uart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "usart";
status = "disabled";
};
@@ -1203,7 +671,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1213,7 +681,7 @@
reg = <0xf802c000 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
};
sfr: sfr@f8030000 {
@@ -1224,7 +692,7 @@
flx0: flexcom@f8034000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8034000 0x800>;
@@ -1234,7 +702,7 @@
flx1: flexcom@f8038000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8038000 0x200>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8038000 0x800>;
@@ -1244,7 +712,7 @@
securam: sram@f8044000 {
compatible = "atmel,sama5d2-securam", "mmio-sram";
reg = <0xf8044000 0x1420>;
- clocks = <&securam_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf8044000 0x1420>;
@@ -1269,7 +737,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&h32ck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog@f8048040 {
@@ -1302,10 +770,10 @@
interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
<64 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can0_clk>, <&can0_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can0_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
status = "disabled";
@@ -1322,7 +790,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(9))>;
dma-names = "tx", "rx";
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1341,7 +809,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(42))>;
dma-names = "tx", "rx";
- clocks = <&uart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
@@ -1357,7 +825,7 @@
AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx", "rx";
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&uart4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
@@ -1365,7 +833,7 @@
flx2: flexcom@fc010000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc010000 0x200>;
- clocks = <&flx2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc010000 0x800>;
@@ -1375,7 +843,7 @@
flx3: flexcom@fc014000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc014000 0x200>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc014000 0x800>;
@@ -1385,7 +853,7 @@
flx4: flexcom@fc018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc018000 0x200>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc018000 0x800>;
@@ -1396,7 +864,7 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc01c000 0x100>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
};
aic: interrupt-controller@fc020000 {
@@ -1420,7 +888,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1429,7 +897,7 @@
compatible = "atmel,sama5d2-adc";
reg = <0xfc030000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&adc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "adc_clk";
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
@@ -1451,7 +919,7 @@
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
};
secumod@fc040000 {
@@ -1470,7 +938,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "tdes_clk";
status = "okay";
};
@@ -1483,7 +951,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(47))>;
dma-names = "tx";
- clocks = <&classd_clk>, <&classd_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1495,10 +963,10 @@
interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
<65 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can1_clk>, <&can1_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can1_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
status = "disabled";
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 15/16] ARM: dts: at91: sama5d2: switch to new binding
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Switch sama5d2 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
arch/arm/boot/dts/sama5d2.dtsi | 642 ++------------------
4 files changed, 64 insertions(+), 596 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index e86e0c00eb6b..2b0ddabe4178 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -165,7 +165,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_i2c>;
atmel,fifo-size = <16>;
@@ -211,7 +211,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -223,7 +223,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx3_default>;
@@ -240,7 +240,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
@@ -252,7 +252,7 @@
compatible = "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "spi_clk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
@@ -268,7 +268,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index b10dccd0958f..835ff9b715c7 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -196,7 +196,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..7546116b3b64 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -258,7 +258,7 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
clock-names = "usart";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
@@ -307,7 +307,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx4_default>;
atmel,fifo-size = <16>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..6c70a928defb 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -81,7 +81,7 @@
compatible = "arm,coresight-etb10", "arm,primecell";
reg = <0x740000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -96,7 +96,7 @@
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x73C000 0x1000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "apb_pclk";
port {
@@ -148,7 +148,7 @@
reg = <0x00300000 0x100000
0xfc02c000 0x400>;
interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -275,7 +275,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -284,7 +284,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -308,7 +308,7 @@
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -356,7 +356,7 @@
/* NFC SRAM banks */
0x00100000 0x00100000
>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
atmel,write-by-sram;
};
};
@@ -365,7 +365,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -374,7 +374,7 @@
compatible = "atmel,sama5d2-sdhci";
reg = <0xb0000000 0x300>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
clock-names = "hclock", "multclk", "baseclk";
status = "disabled";
};
@@ -394,7 +394,7 @@
compatible = "atmel,sama5d2-hlcdc";
reg = <0xf0000000 0x2000>;
interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -420,7 +420,7 @@
compatible = "atmel,sama5d2-isc";
reg = <0xf0008000 0x4000>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
clock-names = "hclock", "iscck", "gck";
#clock-cells = <0>;
clock-output-names = "isc-mck";
@@ -430,7 +430,7 @@
ramc0: ramc at f000c000 {
compatible = "atmel,sama5d3-ddramc";
reg = <0xf000c000 0x200>;
- clocks = <&ddrck>, <&mpddr_clk>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "ddrck", "mpddr";
};
@@ -439,7 +439,7 @@
reg = <0xf0010000 0x1000>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "dma_clk";
};
@@ -449,7 +449,7 @@
reg = <0xf0004000 0x1000>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <1>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "dma_clk";
};
@@ -457,541 +457,9 @@
compatible = "atmel,sama5d2-pmc", "syscon";
reg = <0xf0014000 0x160>;
interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <100000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc &main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,sama5d3-clk-pll";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <12000000 12000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- audio_pll_frac: audiopll_fracck {
- compatible = "atmel,sama5d2-clk-audio-pll-frac";
- #clock-cells = <0>;
- clocks = <&main>;
- };
-
- audio_pll_pad: audiopll_padck {
- compatible = "atmel,sama5d2-clk-audio-pll-pad";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- audio_pll_pmc: audiopll_pmcck {
- compatible = "atmel,sama5d2-clk-audio-pll-pmc";
- #clock-cells = <0>;
- clocks = <&audio_pll_frac>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupt-parent = <&pmc>;
- interrupts = <AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <124000000 166000000>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- h32ck: h32mxck {
- #clock-cells = <0>;
- compatible = "atmel,sama5d4-clk-h32mx";
- clocks = <&mck>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
-
- prog2: prog2 {
- #clock-cells = <0>;
- reg = <2>;
- interrupts = <AT91_PMC_PCKRDY(2)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
-
- pck2: pck2 {
- #clock-cells = <0>;
- reg = <10>;
- clocks = <&prog2>;
- };
-
- iscck: iscck {
- #clock-cells = <0>;
- reg = <18>;
- clocks = <&mck>;
- };
- };
-
- periph32ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&h32ck>;
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <5>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tdes_clk: tdes_clk {
- #clock-cells = <0>;
- reg = <11>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- matrix1_clk: matrix1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- hsmc_clk: hsmc_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <18>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx0_clk: flx0_clk {
- #clock-cells = <0>;
- reg = <19>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx1_clk: flx1_clk {
- #clock-cells = <0>;
- reg = <20>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx2_clk: flx2_clk {
- #clock-cells = <0>;
- reg = <21>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx3_clk: flx3_clk {
- #clock-cells = <0>;
- reg = <22>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- flx4_clk: flx4_clk {
- #clock-cells = <0>;
- reg = <23>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <24>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <25>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart2_clk: uart2_clk {
- #clock-cells = <0>;
- reg = <26>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart3_clk: uart3_clk {
- #clock-cells = <0>;
- reg = <27>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uart4_clk: uart4_clk {
- #clock-cells = <0>;
- reg = <28>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi0_clk: twi0_clk {
- reg = <29>;
- #clock-cells = <0>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <30>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <33>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <34>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_clk: tcb1_clk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <40>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <41>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <42>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <43>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <44>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <47>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pdmic_clk: pdmic_clk {
- #clock-cells = <0>;
- reg = <48>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- securam_clk: securam_clk {
- #clock-cells = <0>;
- reg = <51>;
- };
-
- i2s0_clk: i2s0_clk {
- #clock-cells = <0>;
- reg = <54>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- i2s1_clk: i2s1_clk {
- #clock-cells = <0>;
- reg = <55>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- classd_clk: classd_clk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 83000000>;
- };
- };
-
- periph64ck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- aesb_clk: aesb_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- mpddr_clk: mpddr_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- matrix0_clk: matrix0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- sdmmc0_hclk: sdmmc0_hclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_hclk: sdmmc1_hclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <45>;
- };
-
- isc_clk: isc_clk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- qspi0_clk: qspi0_clk {
- #clock-cells = <0>;
- reg = <52>;
- };
-
- qspi1_clk: qspi1_clk {
- #clock-cells = <0>;
- reg = <53>;
- };
- };
-
- gck {
- compatible = "atmel,sama5d2-clk-generated";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
-
- sdmmc0_gclk: sdmmc0_gclk {
- #clock-cells = <0>;
- reg = <31>;
- };
-
- sdmmc1_gclk: sdmmc1_gclk {
- #clock-cells = <0>;
- reg = <32>;
- };
-
- tcb0_gclk: tcb0_gclk {
- #clock-cells = <0>;
- reg = <35>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- tcb1_gclk: tcb1_gclk {
- #clock-cells = <0>;
- reg = <36>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- pwm_gclk: pwm_gclk {
- #clock-cells = <0>;
- reg = <38>;
- atmel,clk-output-range = <0 83000000>;
- };
-
- isc_gclk: isc_gclk {
- #clock-cells = <0>;
- reg = <46>;
- };
-
- pdmic_gclk: pdmic_gclk {
- #clock-cells = <0>;
- reg = <48>;
- };
-
- i2s0_gclk: i2s0_gclk {
- #clock-cells = <0>;
- reg = <54>;
- };
-
- i2s1_gclk: i2s1_gclk {
- #clock-cells = <0>;
- reg = <55>;
- };
-
- can0_gclk: can0_gclk {
- #clock-cells = <0>;
- reg = <56>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- can1_gclk: can1_gclk {
- #clock-cells = <0>;
- reg = <57>;
- atmel,clk-output-range = <0 80000000>;
- };
-
- classd_gclk: classd_gclk {
- #clock-cells = <0>;
- reg = <59>;
- atmel,clk-output-range = <0 100000000>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
qspi0: spi at f0020000 {
@@ -999,7 +467,7 @@
reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1010,7 +478,7 @@
reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
reg-names = "qspi_base", "qspi_mmap";
interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&qspi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1024,7 +492,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(30))>;
dma-names = "tx";
- clocks = <&sha_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "sha_clk";
status = "okay";
};
@@ -1040,7 +508,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(27))>;
dma-names = "tx", "rx";
- clocks = <&aes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "aes_clk";
status = "okay";
};
@@ -1056,7 +524,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1075,7 +543,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(22))>;
dma-names = "tx", "rx";
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
clock-names = "pclk";
status = "disabled";
};
@@ -1088,7 +556,7 @@
67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1099,7 +567,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1109,7 +577,7 @@
#size-cells = <0>;
reg = <0xf8010000 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb1_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -1117,7 +585,7 @@
compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
reg = <0xf8014000 0x1000>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- clocks = <&hsmc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1137,7 +605,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(50))>;
dma-names = "rx";
- clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1153,7 +621,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(36))>;
dma-names = "tx", "rx";
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "usart";
status = "disabled";
};
@@ -1169,7 +637,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(38))>;
dma-names = "tx", "rx";
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "usart";
status = "disabled";
};
@@ -1185,7 +653,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(40))>;
dma-names = "tx", "rx";
- clocks = <&uart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "usart";
status = "disabled";
};
@@ -1203,7 +671,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1213,7 +681,7 @@
reg = <0xf802c000 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
};
sfr: sfr at f8030000 {
@@ -1224,7 +692,7 @@
flx0: flexcom at f8034000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8034000 0x200>;
- clocks = <&flx0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8034000 0x800>;
@@ -1234,7 +702,7 @@
flx1: flexcom at f8038000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xf8038000 0x200>;
- clocks = <&flx1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xf8038000 0x800>;
@@ -1244,7 +712,7 @@
securam: sram at f8044000 {
compatible = "atmel,sama5d2-securam", "mmio-sram";
reg = <0xf8044000 0x1420>;
- clocks = <&securam_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf8044000 0x1420>;
@@ -1269,7 +737,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xf8048030 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&h32ck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
};
watchdog at f8048040 {
@@ -1302,10 +770,10 @@
interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
<64 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can0_clk>, <&can0_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can0_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
status = "disabled";
@@ -1322,7 +790,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(9))>;
dma-names = "tx", "rx";
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
clock-names = "spi_clk";
atmel,fifo-size = <16>;
#address-cells = <1>;
@@ -1341,7 +809,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(42))>;
dma-names = "tx", "rx";
- clocks = <&uart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "usart";
status = "disabled";
};
@@ -1357,7 +825,7 @@
AT91_XDMAC_DT_PERID(44))>;
dma-names = "tx", "rx";
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&uart4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "usart";
status = "disabled";
};
@@ -1365,7 +833,7 @@
flx2: flexcom at fc010000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc010000 0x200>;
- clocks = <&flx2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc010000 0x800>;
@@ -1375,7 +843,7 @@
flx3: flexcom at fc014000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc014000 0x200>;
- clocks = <&flx3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc014000 0x800>;
@@ -1385,7 +853,7 @@
flx4: flexcom at fc018000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xfc018000 0x200>;
- clocks = <&flx4_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xfc018000 0x800>;
@@ -1396,7 +864,7 @@
compatible = "atmel,at91sam9g45-trng";
reg = <0xfc01c000 0x100>;
interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
};
aic: interrupt-controller at fc020000 {
@@ -1420,7 +888,7 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
atmel,fifo-size = <16>;
status = "disabled";
};
@@ -1429,7 +897,7 @@
compatible = "atmel,sama5d2-adc";
reg = <0xfc030000 0x100>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&adc_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
clock-names = "adc_clk";
dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
dma-names = "rx";
@@ -1451,7 +919,7 @@
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
};
secumod at fc040000 {
@@ -1470,7 +938,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(29))>;
dma-names = "tx", "rx";
- clocks = <&tdes_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "tdes_clk";
status = "okay";
};
@@ -1483,7 +951,7 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(47))>;
dma-names = "tx";
- clocks = <&classd_clk>, <&classd_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
clock-names = "pclk", "gclk";
status = "disabled";
};
@@ -1495,10 +963,10 @@
interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
<65 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-names = "int0", "int1";
- clocks = <&can1_clk>, <&can1_gclk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
clock-names = "hclk", "cclk";
- assigned-clocks = <&can1_gclk>;
- assigned-clock-parents = <&utmi>;
+ assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
assigned-clock-rates = <40000000>;
bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
status = "disabled";
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 16/16] ARM: dts: at91: at91sam9x5: switch to new clock bindings
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-17 22:27 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: Stephen Boyd, Rob Herring
Cc: Nicolas Ferre, Michael Turquette, Thomas Petazzoni, linux-clk,
devicetree, linux-arm-kernel, linux-kernel, Alexandre Belloni
Switch at91sam9x5 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +++--------------------
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
13 files changed, 62 insertions(+), 369 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index 27de7dc0f0e0..b34a6c65bd44 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -24,6 +24,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 0898213f3bb2..d8bb56253e64 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 31fecc2cdaf9..ac730812a81d 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -32,9 +32,9 @@
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "xvclk";
- assigned-clocks = <&pck0>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <25000000>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index ff4115886f97..333e158feb61 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -25,6 +25,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 3c5fa3388997..a99703a262c9 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -27,6 +27,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index d9054e8167b7..bca274d33f68 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a3c3c3128148..808f1ea16f9f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,7 +111,7 @@
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};
@@ -124,269 +124,9 @@
compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc>, <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <745000000 800000000 0 0
- 695000000 750000000 1 0
- 645000000 700000000 2 0
- 595000000 650000000 3 0
- 545000000 600000000 0 1
- 495000000 555000000 1 1
- 445000000 500000000 2 1
- 400000000 450000000 3 1>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 133333333>;
- atmel,clk-divisors = <1 2 4 3>;
- atmel,master-clk-have-div3-pres;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioAB_clk: pioAB_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioCD_clk: pioCD_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- smd_clk: smd_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- twi0_clk: twi0_clk {
- reg = <9>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <11>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
rstc@fffffe00 {
@@ -405,7 +145,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
sckc@fffffe50 {
@@ -438,7 +178,7 @@
#size-cells = <0>;
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -448,7 +188,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -457,7 +197,7 @@
reg = <0xffffec00 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "dma_clk";
};
@@ -466,7 +206,7 @@
reg = <0xffffee00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "dma_clk";
};
@@ -864,7 +604,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
@@ -876,7 +616,7 @@
#gpio-lines = <19>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioC: gpio@fffff800 {
@@ -887,7 +627,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioD: gpio@fffffa00 {
@@ -899,7 +639,7 @@
#gpio-lines = <22>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
};
@@ -912,7 +652,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "pclk";
status = "disabled";
};
@@ -924,7 +664,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -938,7 +678,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -954,7 +694,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -968,7 +708,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "usart";
status = "disabled";
};
@@ -982,7 +722,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -996,7 +736,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -1012,7 +752,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
status = "disabled";
};
@@ -1027,7 +767,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
status = "disabled";
};
@@ -1042,7 +782,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
status = "disabled";
};
@@ -1052,7 +792,7 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "usart";
status = "disabled";
};
@@ -1063,7 +803,7 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -1074,7 +814,7 @@
compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
@@ -1121,7 +861,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1137,7 +877,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1149,7 +889,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&utmi>, <&udphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "hclk", "pclk";
status = "disabled";
@@ -1229,7 +969,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1239,7 +979,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1248,7 +988,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1266,7 +1006,7 @@
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index 8eb2f9c1b978..125f9e3b49ad 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -13,27 +13,13 @@
/ {
ahb {
apb {
- pmc: pmc@fffffc00 {
- periphck {
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
- };
- };
-
can0: can@f8000000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8000000 0x300>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
- clocks = <&can0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "can_clk";
status = "disabled";
};
@@ -44,7 +30,7 @@
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
- clocks = <&can1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "can_clk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 8fc45ca4dcb5..c3e45b57b6a2 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -44,22 +44,13 @@
};
};
- pmc: pmc@fffffc00 {
- periphck {
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
- };
-
isi: isi@f8048000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf8048000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "isi_clk";
status = "disabled";
port {
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 1629db9dd563..12595fb11691 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -17,7 +17,7 @@
compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf8038000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -143,23 +143,6 @@
};
};
};
-
- pmc: pmc@fffffc00 {
- periphck {
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
-
- systemck {
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 73d7e30965ba..57c2e5a4fb53 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,22 +43,13 @@
};
};
- pmc: pmc@fffffc00 {
- periphck {
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
- };
- };
-
macb0: ethernet@f802c000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index d81980c40c7d..59b8da87d3c1 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,22 +31,13 @@
};
};
- pmc: pmc@fffffc00 {
- periphck {
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
- };
- };
-
macb1: ethernet@f8030000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index a32d12b406a3..9102dfbed5d8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,15 +42,6 @@
};
};
- pmc: pmc@fffffc00 {
- periphck {
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
- };
- };
-
usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x200>;
@@ -60,7 +51,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* [PATCH 16/16] ARM: dts: at91: at91sam9x5: switch to new clock bindings
@ 2018-07-17 22:27 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-17 22:27 UTC (permalink / raw)
To: linux-arm-kernel
Switch at91sam9x5 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +++--------------------
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
13 files changed, 62 insertions(+), 369 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index 27de7dc0f0e0..b34a6c65bd44 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -24,6 +24,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 0898213f3bb2..d8bb56253e64 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 31fecc2cdaf9..ac730812a81d 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -32,9 +32,9 @@
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "xvclk";
- assigned-clocks = <&pck0>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <25000000>;
status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index ff4115886f97..333e158feb61 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -25,6 +25,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 3c5fa3388997..a99703a262c9 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -27,6 +27,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index d9054e8167b7..bca274d33f68 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc at fffffc00 {
+ compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a3c3c3128148..808f1ea16f9f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,7 +111,7 @@
ramc0: ramc at ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};
@@ -124,269 +124,9 @@
compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc>, <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <745000000 800000000 0 0
- 695000000 750000000 1 0
- 645000000 700000000 2 0
- 595000000 650000000 3 0
- 545000000 600000000 0 1
- 495000000 555000000 1 1
- 445000000 500000000 2 1
- 400000000 450000000 3 1>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 133333333>;
- atmel,clk-divisors = <1 2 4 3>;
- atmel,master-clk-have-div3-pres;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioAB_clk: pioAB_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioCD_clk: pioCD_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- smd_clk: smd_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- twi0_clk: twi0_clk {
- reg = <9>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <11>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
rstc at fffffe00 {
@@ -405,7 +145,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
sckc at fffffe50 {
@@ -438,7 +178,7 @@
#size-cells = <0>;
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -448,7 +188,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -457,7 +197,7 @@
reg = <0xffffec00 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "dma_clk";
};
@@ -466,7 +206,7 @@
reg = <0xffffee00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "dma_clk";
};
@@ -864,7 +604,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio at fffff600 {
@@ -876,7 +616,7 @@
#gpio-lines = <19>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioC: gpio at fffff800 {
@@ -887,7 +627,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioD: gpio at fffffa00 {
@@ -899,7 +639,7 @@
#gpio-lines = <22>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
};
@@ -912,7 +652,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "pclk";
status = "disabled";
};
@@ -924,7 +664,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -938,7 +678,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -954,7 +694,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -968,7 +708,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "usart";
status = "disabled";
};
@@ -982,7 +722,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -996,7 +736,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -1012,7 +752,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
status = "disabled";
};
@@ -1027,7 +767,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
status = "disabled";
};
@@ -1042,7 +782,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
status = "disabled";
};
@@ -1052,7 +792,7 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "usart";
status = "disabled";
};
@@ -1063,7 +803,7 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -1074,7 +814,7 @@
compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
@@ -1121,7 +861,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1137,7 +877,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1149,7 +889,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&utmi>, <&udphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "hclk", "pclk";
status = "disabled";
@@ -1229,7 +969,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1239,7 +979,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1248,7 +988,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1266,7 +1006,7 @@
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index 8eb2f9c1b978..125f9e3b49ad 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -13,27 +13,13 @@
/ {
ahb {
apb {
- pmc: pmc at fffffc00 {
- periphck {
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
- };
- };
-
can0: can at f8000000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8000000 0x300>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
- clocks = <&can0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "can_clk";
status = "disabled";
};
@@ -44,7 +30,7 @@
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
- clocks = <&can1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "can_clk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 8fc45ca4dcb5..c3e45b57b6a2 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -44,22 +44,13 @@
};
};
- pmc: pmc at fffffc00 {
- periphck {
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
- };
-
isi: isi at f8048000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf8048000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "isi_clk";
status = "disabled";
port {
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 1629db9dd563..12595fb11691 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -17,7 +17,7 @@
compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf8038000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
@@ -143,23 +143,6 @@
};
};
};
-
- pmc: pmc at fffffc00 {
- periphck {
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
-
- systemck {
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 73d7e30965ba..57c2e5a4fb53 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,22 +43,13 @@
};
};
- pmc: pmc at fffffc00 {
- periphck {
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
- };
- };
-
macb0: ethernet at f802c000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index d81980c40c7d..59b8da87d3c1 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,22 +31,13 @@
};
};
- pmc: pmc at fffffc00 {
- periphck {
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
- };
- };
-
macb1: ethernet at f8030000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index a32d12b406a3..9102dfbed5d8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,15 +42,6 @@
};
};
- pmc: pmc at fffffc00 {
- periphck {
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
- };
- };
-
usart3: serial at f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x200>;
@@ -60,7 +51,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
--
2.18.0
^ permalink raw reply related [flat|nested] 57+ messages in thread
* Re: [PATCH 08/16] dt-bindings: clk: at91: Document new PMC binding
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-25 19:09 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2018-07-25 19:09 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Stephen Boyd, Nicolas Ferre, Michael Turquette, Thomas Petazzoni,
linux-clk, devicetree, linux-arm-kernel, linux-kernel
On Wed, Jul 18, 2018 at 12:27:49AM +0200, Alexandre Belloni wrote:
> Document the new PMC binding with only one PMC node for all the PMC clocks
> instead of one node per clock as this proved to be problematic.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 523 +-----------------
> 1 file changed, 21 insertions(+), 502 deletions(-)
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 08/16] dt-bindings: clk: at91: Document new PMC binding
@ 2018-07-25 19:09 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2018-07-25 19:09 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 18, 2018 at 12:27:49AM +0200, Alexandre Belloni wrote:
> Document the new PMC binding with only one PMC node for all the PMC clocks
> instead of one node per clock as this proved to be problematic.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> .../devicetree/bindings/clock/at91-clock.txt | 523 +-----------------
> 1 file changed, 21 insertions(+), 502 deletions(-)
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 09/16] clk: at91: add new DT lookup function
2018-07-17 22:27 ` Alexandre Belloni
@ 2018-07-25 19:10 ` Rob Herring
-1 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2018-07-25 19:10 UTC (permalink / raw)
To: Alexandre Belloni
Cc: Stephen Boyd, Nicolas Ferre, Michael Turquette, Thomas Petazzoni,
linux-clk, devicetree, linux-arm-kernel, linux-kernel
On Wed, Jul 18, 2018 at 12:27:50AM +0200, Alexandre Belloni wrote:
> Add a new DT lookup function to lookup for PMC clocks.
>
> Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the
> platforms are converted.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/clk/at91/pmc.c | 34 ++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/at91.h | 14 +++++++++++++
Acked-by: Rob Herring <robh@kernel.org>
> 2 files changed, 48 insertions(+)
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 09/16] clk: at91: add new DT lookup function
@ 2018-07-25 19:10 ` Rob Herring
0 siblings, 0 replies; 57+ messages in thread
From: Rob Herring @ 2018-07-25 19:10 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 18, 2018 at 12:27:50AM +0200, Alexandre Belloni wrote:
> Add a new DT lookup function to lookup for PMC clocks.
>
> Note that the #ifndef AT91_PMC_MOSCS section will be removed once all the
> platforms are converted.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> ---
> drivers/clk/at91/pmc.c | 34 ++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/at91.h | 14 +++++++++++++
Acked-by: Rob Herring <robh@kernel.org>
> 2 files changed, 48 insertions(+)
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-07-17 22:27 ` Alexandre Belloni
(?)
(?)
@ 2018-07-27 17:03 ` Stephen Boyd
-1 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-07-27 17:03 UTC (permalink / raw)
To: Alexandre Belloni, Rob Herring
Cc: devicetree, Alexandre Belloni, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-07-17 15:27:41)
> This is the promised rework of the at91 PMC clocks driver. It is mainly
> necessary to remove the DTC warnings but it also complies with the CCF
> rule that there should be one node per controller instead of one node
> per clock.
>
> This only handles the PMC, I'm planning to also rework the SCKC bindings
> later (without breaking the DT ABI).
>
> The series is based on top of clk-next plus at91-dt so I don't think it
> is convenient to have it this cycle. However, I would really like to
> ensure we agree on the new bindings this cycle before converting all the
> other platforms as this is a bit tedious.
>
> The first two patches are actually fixes and may be considered for this
> cycle.
>
> One nice note:
> at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
Patches look mostly good. Rob is happy with the bindings and so am I.
One general question is why the drivers can't be moved to real platform
drivers instead of using OF_CLK_DECLARE?
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-27 17:03 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-07-27 17:03 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, Alexandre Belloni, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-07-17 15:27:41)
> This is the promised rework of the at91 PMC clocks driver. It is mainly
> necessary to remove the DTC warnings but it also complies with the CCF
> rule that there should be one node per controller instead of one node
> per clock.
>
> This only handles the PMC, I'm planning to also rework the SCKC bindings
> later (without breaking the DT ABI).
>
> The series is based on top of clk-next plus at91-dt so I don't think it
> is convenient to have it this cycle. However, I would really like to
> ensure we agree on the new bindings this cycle before converting all the
> other platforms as this is a bit tedious.
>
> The first two patches are actually fixes and may be considered for this
> cycle.
>
> One nice note:
> at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
Patches look mostly good. Rob is happy with the bindings and so am I.
One general question is why the drivers can't be moved to real platform
drivers instead of using OF_CLK_DECLARE?
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-27 17:03 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-07-27 17:03 UTC (permalink / raw)
To: Alexandre Belloni, Rob Herring
Cc: devicetree, Alexandre Belloni, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-07-17 15:27:41)
> This is the promised rework of the at91 PMC clocks driver. It is mainly
> necessary to remove the DTC warnings but it also complies with the CCF
> rule that there should be one node per controller instead of one node
> per clock.
> =
> This only handles the PMC, I'm planning to also rework the SCKC bindings
> later (without breaking the DT ABI).
> =
> The series is based on top of clk-next plus at91-dt so I don't think it
> is convenient to have it this cycle. However, I would really like to
> ensure we agree on the new bindings this cycle before converting all the
> other platforms as this is a bit tedious.
> =
> The first two patches are actually fixes and may be considered for this
> cycle.
> =
> One nice note:
> at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
Patches look mostly good. Rob is happy with the bindings and so am I.
One general question is why the drivers can't be moved to real platform
drivers instead of using OF_CLK_DECLARE?
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-27 17:03 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-07-27 17:03 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Alexandre Belloni (2018-07-17 15:27:41)
> This is the promised rework of the at91 PMC clocks driver. It is mainly
> necessary to remove the DTC warnings but it also complies with the CCF
> rule that there should be one node per controller instead of one node
> per clock.
>
> This only handles the PMC, I'm planning to also rework the SCKC bindings
> later (without breaking the DT ABI).
>
> The series is based on top of clk-next plus at91-dt so I don't think it
> is convenient to have it this cycle. However, I would really like to
> ensure we agree on the new bindings this cycle before converting all the
> other platforms as this is a bit tedious.
>
> The first two patches are actually fixes and may be considered for this
> cycle.
>
> One nice note:
> at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
Patches look mostly good. Rob is happy with the bindings and so am I.
One general question is why the drivers can't be moved to real platform
drivers instead of using OF_CLK_DECLARE?
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-07-27 17:03 ` Stephen Boyd
@ 2018-07-27 20:02 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-27 20:02 UTC (permalink / raw)
To: Stephen Boyd
Cc: Rob Herring, devicetree, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > necessary to remove the DTC warnings but it also complies with the CCF
> > rule that there should be one node per controller instead of one node
> > per clock.
> >
> > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > later (without breaking the DT ABI).
> >
> > The series is based on top of clk-next plus at91-dt so I don't think it
> > is convenient to have it this cycle. However, I would really like to
> > ensure we agree on the new bindings this cycle before converting all the
> > other platforms as this is a bit tedious.
> >
> > The first two patches are actually fixes and may be considered for this
> > cycle.
> >
> > One nice note:
> > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
>
> Patches look mostly good. Rob is happy with the bindings and so am I.
>
> One general question is why the drivers can't be moved to real platform
> drivers instead of using OF_CLK_DECLARE?
>
I actually didn't try. I'll do it early next week. I'm not sure how this
will work with the PM handling on sama5d2 but I'll probably figure
something out.
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-07-27 20:02 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-07-27 20:02 UTC (permalink / raw)
To: linux-arm-kernel
On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > necessary to remove the DTC warnings but it also complies with the CCF
> > rule that there should be one node per controller instead of one node
> > per clock.
> >
> > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > later (without breaking the DT ABI).
> >
> > The series is based on top of clk-next plus at91-dt so I don't think it
> > is convenient to have it this cycle. However, I would really like to
> > ensure we agree on the new bindings this cycle before converting all the
> > other platforms as this is a bit tedious.
> >
> > The first two patches are actually fixes and may be considered for this
> > cycle.
> >
> > One nice note:
> > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
>
> Patches look mostly good. Rob is happy with the bindings and so am I.
>
> One general question is why the drivers can't be moved to real platform
> drivers instead of using OF_CLK_DECLARE?
>
I actually didn't try. I'll do it early next week. I'm not sure how this
will work with the PM handling on sama5d2 but I'll probably figure
something out.
--
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-07-27 17:03 ` Stephen Boyd
@ 2018-08-16 11:47 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-08-16 11:47 UTC (permalink / raw)
To: Stephen Boyd
Cc: Rob Herring, devicetree, Michael Turquette, linux-kernel,
Thomas Petazzoni, linux-clk, linux-arm-kernel
On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > necessary to remove the DTC warnings but it also complies with the CCF
> > rule that there should be one node per controller instead of one node
> > per clock.
> >
> > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > later (without breaking the DT ABI).
> >
> > The series is based on top of clk-next plus at91-dt so I don't think it
> > is convenient to have it this cycle. However, I would really like to
> > ensure we agree on the new bindings this cycle before converting all the
> > other platforms as this is a bit tedious.
> >
> > The first two patches are actually fixes and may be considered for this
> > cycle.
> >
> > One nice note:
> > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
>
> Patches look mostly good. Rob is happy with the bindings and so am I.
>
> One general question is why the drivers can't be moved to real platform
> drivers instead of using OF_CLK_DECLARE?
>
I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
so the kernel just stops there.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-08-16 11:47 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-08-16 11:47 UTC (permalink / raw)
To: linux-arm-kernel
On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > necessary to remove the DTC warnings but it also complies with the CCF
> > rule that there should be one node per controller instead of one node
> > per clock.
> >
> > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > later (without breaking the DT ABI).
> >
> > The series is based on top of clk-next plus at91-dt so I don't think it
> > is convenient to have it this cycle. However, I would really like to
> > ensure we agree on the new bindings this cycle before converting all the
> > other platforms as this is a bit tedious.
> >
> > The first two patches are actually fixes and may be considered for this
> > cycle.
> >
> > One nice note:
> > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
>
> Patches look mostly good. Rob is happy with the bindings and so am I.
>
> One general question is why the drivers can't be moved to real platform
> drivers instead of using OF_CLK_DECLARE?
>
I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
so the kernel just stops there.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-08-16 11:47 ` Alexandre Belloni
(?)
@ 2018-08-31 17:45 ` Stephen Boyd
-1 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-08-31 17:45 UTC (permalink / raw)
To: Alexandre Belloni
Cc: devicetree, Michael Turquette, linux-kernel, Rob Herring,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-08-16 04:47:55)
> On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > necessary to remove the DTC warnings but it also complies with the CCF
> > > rule that there should be one node per controller instead of one node
> > > per clock.
> > >
> > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > later (without breaking the DT ABI).
> > >
> > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > is convenient to have it this cycle. However, I would really like to
> > > ensure we agree on the new bindings this cycle before converting all the
> > > other platforms as this is a bit tedious.
> > >
> > > The first two patches are actually fixes and may be considered for this
> > > cycle.
> > >
> > > One nice note:
> > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> >
> > Patches look mostly good. Rob is happy with the bindings and so am I.
> >
> > One general question is why the drivers can't be moved to real platform
> > drivers instead of using OF_CLK_DECLARE?
> >
>
> I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> so the kernel just stops there.
>
Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-08-31 17:45 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-08-31 17:45 UTC (permalink / raw)
To: Alexandre Belloni
Cc: devicetree, Michael Turquette, linux-kernel, Rob Herring,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-08-16 04:47:55)
> On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > This is the promised rework of the at91 PMC clocks driver. It is main=
ly
> > > necessary to remove the DTC warnings but it also complies with the CCF
> > > rule that there should be one node per controller instead of one node
> > > per clock.
> > > =
> > > This only handles the PMC, I'm planning to also rework the SCKC bindi=
ngs
> > > later (without breaking the DT ABI).
> > > =
> > > The series is based on top of clk-next plus at91-dt so I don't think =
it
> > > is convenient to have it this cycle. However, I would really like to
> > > ensure we agree on the new bindings this cycle before converting all =
the
> > > other platforms as this is a bit tedious.
> > > =
> > > The first two patches are actually fixes and may be considered for th=
is
> > > cycle.
> > > =
> > > One nice note:
> > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > =
> > Patches look mostly good. Rob is happy with the bindings and so am I.
> > =
> > One general question is why the drivers can't be moved to real platform
> > drivers instead of using OF_CLK_DECLARE?
> > =
> =
> I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> so the kernel just stops there.
> =
Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-08-31 17:45 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-08-31 17:45 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Alexandre Belloni (2018-08-16 04:47:55)
> On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > necessary to remove the DTC warnings but it also complies with the CCF
> > > rule that there should be one node per controller instead of one node
> > > per clock.
> > >
> > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > later (without breaking the DT ABI).
> > >
> > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > is convenient to have it this cycle. However, I would really like to
> > > ensure we agree on the new bindings this cycle before converting all the
> > > other platforms as this is a bit tedious.
> > >
> > > The first two patches are actually fixes and may be considered for this
> > > cycle.
> > >
> > > One nice note:
> > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> >
> > Patches look mostly good. Rob is happy with the bindings and so am I.
> >
> > One general question is why the drivers can't be moved to real platform
> > drivers instead of using OF_CLK_DECLARE?
> >
>
> I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> so the kernel just stops there.
>
Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-08-31 17:45 ` Stephen Boyd
@ 2018-10-12 18:28 ` Stephen Boyd
-1 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-10-12 18:28 UTC (permalink / raw)
To: Alexandre Belloni
Cc: devicetree, Michael Turquette, linux-kernel, Rob Herring,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Stephen Boyd (2018-08-31 10:45:30)
> Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > rule that there should be one node per controller instead of one node
> > > > per clock.
> > > >
> > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > later (without breaking the DT ABI).
> > > >
> > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > is convenient to have it this cycle. However, I would really like to
> > > > ensure we agree on the new bindings this cycle before converting all the
> > > > other platforms as this is a bit tedious.
> > > >
> > > > The first two patches are actually fixes and may be considered for this
> > > > cycle.
> > > >
> > > > One nice note:
> > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > >
> > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > >
> > > One general question is why the drivers can't be moved to real platform
> > > drivers instead of using OF_CLK_DECLARE?
> > >
> >
> > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > so the kernel just stops there.
> >
>
> Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
>
I assume this will be resent. I haven't seen anything yet though.
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-10-12 18:28 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-10-12 18:28 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Stephen Boyd (2018-08-31 10:45:30)
> Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > rule that there should be one node per controller instead of one node
> > > > per clock.
> > > >
> > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > later (without breaking the DT ABI).
> > > >
> > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > is convenient to have it this cycle. However, I would really like to
> > > > ensure we agree on the new bindings this cycle before converting all the
> > > > other platforms as this is a bit tedious.
> > > >
> > > > The first two patches are actually fixes and may be considered for this
> > > > cycle.
> > > >
> > > > One nice note:
> > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > >
> > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > >
> > > One general question is why the drivers can't be moved to real platform
> > > drivers instead of using OF_CLK_DECLARE?
> > >
> >
> > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > so the kernel just stops there.
> >
>
> Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
>
I assume this will be resent. I haven't seen anything yet though.
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-10-12 18:28 ` Stephen Boyd
@ 2018-10-12 18:40 ` Alexandre Belloni
-1 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-10-12 18:40 UTC (permalink / raw)
To: Stephen Boyd
Cc: devicetree, Michael Turquette, linux-kernel, Rob Herring,
Thomas Petazzoni, linux-clk, linux-arm-kernel
On 12/10/2018 11:28:06-0700, Stephen Boyd wrote:
> Quoting Stephen Boyd (2018-08-31 10:45:30)
> > Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > > rule that there should be one node per controller instead of one node
> > > > > per clock.
> > > > >
> > > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > > later (without breaking the DT ABI).
> > > > >
> > > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > > is convenient to have it this cycle. However, I would really like to
> > > > > ensure we agree on the new bindings this cycle before converting all the
> > > > > other platforms as this is a bit tedious.
> > > > >
> > > > > The first two patches are actually fixes and may be considered for this
> > > > > cycle.
> > > > >
> > > > > One nice note:
> > > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > > >
> > > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > > >
> > > > One general question is why the drivers can't be moved to real platform
> > > > drivers instead of using OF_CLK_DECLARE?
> > > >
> > >
> > > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > > so the kernel just stops there.
> > >
> >
> > Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
> >
>
> I assume this will be resent. I haven't seen anything yet though.
>
It will, would you be willing to take it for this cycle if I manage to
send it on Monday? (it seems that we will have an -rc8).
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-10-12 18:40 ` Alexandre Belloni
0 siblings, 0 replies; 57+ messages in thread
From: Alexandre Belloni @ 2018-10-12 18:40 UTC (permalink / raw)
To: linux-arm-kernel
On 12/10/2018 11:28:06-0700, Stephen Boyd wrote:
> Quoting Stephen Boyd (2018-08-31 10:45:30)
> > Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > > rule that there should be one node per controller instead of one node
> > > > > per clock.
> > > > >
> > > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > > later (without breaking the DT ABI).
> > > > >
> > > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > > is convenient to have it this cycle. However, I would really like to
> > > > > ensure we agree on the new bindings this cycle before converting all the
> > > > > other platforms as this is a bit tedious.
> > > > >
> > > > > The first two patches are actually fixes and may be considered for this
> > > > > cycle.
> > > > >
> > > > > One nice note:
> > > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > > >
> > > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > > >
> > > > One general question is why the drivers can't be moved to real platform
> > > > drivers instead of using OF_CLK_DECLARE?
> > > >
> > >
> > > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > > so the kernel just stops there.
> > >
> >
> > Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
> >
>
> I assume this will be resent. I haven't seen anything yet though.
>
It will, would you be willing to take it for this cycle if I manage to
send it on Monday? (it seems that we will have an -rc8).
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
^ permalink raw reply [flat|nested] 57+ messages in thread
* Re: [PATCH 00/16] clk: at91: Rework DT bindings
2018-10-12 18:40 ` Alexandre Belloni
@ 2018-10-12 19:50 ` Stephen Boyd
-1 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-10-12 19:50 UTC (permalink / raw)
To: Alexandre Belloni
Cc: devicetree, Michael Turquette, linux-kernel, Rob Herring,
Thomas Petazzoni, linux-clk, linux-arm-kernel
Quoting Alexandre Belloni (2018-10-12 11:40:17)
> On 12/10/2018 11:28:06-0700, Stephen Boyd wrote:
> > Quoting Stephen Boyd (2018-08-31 10:45:30)
> > > Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > > > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > > > rule that there should be one node per controller instead of one node
> > > > > > per clock.
> > > > > >
> > > > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > > > later (without breaking the DT ABI).
> > > > > >
> > > > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > > > is convenient to have it this cycle. However, I would really like to
> > > > > > ensure we agree on the new bindings this cycle before converting all the
> > > > > > other platforms as this is a bit tedious.
> > > > > >
> > > > > > The first two patches are actually fixes and may be considered for this
> > > > > > cycle.
> > > > > >
> > > > > > One nice note:
> > > > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > > > >
> > > > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > > > >
> > > > > One general question is why the drivers can't be moved to real platform
> > > > > drivers instead of using OF_CLK_DECLARE?
> > > > >
> > > >
> > > > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > > > so the kernel just stops there.
> > > >
> > >
> > > Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
> > >
> >
> > I assume this will be resent. I haven't seen anything yet though.
> >
>
> It will, would you be willing to take it for this cycle if I manage to
> send it on Monday? (it seems that we will have an -rc8).
>
Well there are fixes to be made, so go at your own pace and don't stress
yourself to deliver it on Monday. I plan to stop picking most things
early next week.
^ permalink raw reply [flat|nested] 57+ messages in thread
* [PATCH 00/16] clk: at91: Rework DT bindings
@ 2018-10-12 19:50 ` Stephen Boyd
0 siblings, 0 replies; 57+ messages in thread
From: Stephen Boyd @ 2018-10-12 19:50 UTC (permalink / raw)
To: linux-arm-kernel
Quoting Alexandre Belloni (2018-10-12 11:40:17)
> On 12/10/2018 11:28:06-0700, Stephen Boyd wrote:
> > Quoting Stephen Boyd (2018-08-31 10:45:30)
> > > Quoting Alexandre Belloni (2018-08-16 04:47:55)
> > > > On 27/07/2018 10:03:22-0700, Stephen Boyd wrote:
> > > > > Quoting Alexandre Belloni (2018-07-17 15:27:41)
> > > > > > This is the promised rework of the at91 PMC clocks driver. It is mainly
> > > > > > necessary to remove the DTC warnings but it also complies with the CCF
> > > > > > rule that there should be one node per controller instead of one node
> > > > > > per clock.
> > > > > >
> > > > > > This only handles the PMC, I'm planning to also rework the SCKC bindings
> > > > > > later (without breaking the DT ABI).
> > > > > >
> > > > > > The series is based on top of clk-next plus at91-dt so I don't think it
> > > > > > is convenient to have it this cycle. However, I would really like to
> > > > > > ensure we agree on the new bindings this cycle before converting all the
> > > > > > other platforms as this is a bit tedious.
> > > > > >
> > > > > > The first two patches are actually fixes and may be considered for this
> > > > > > cycle.
> > > > > >
> > > > > > One nice note:
> > > > > > at91-sama5d2_xplained.dtb goes from 29351 bytes to 22082 bytes
> > > > >
> > > > > Patches look mostly good. Rob is happy with the bindings and so am I.
> > > > >
> > > > > One general question is why the drivers can't be moved to real platform
> > > > > drivers instead of using OF_CLK_DECLARE?
> > > > >
> > > >
> > > > I tried, this makes the clocksource drivers fail with -EPROBE_DEFER and
> > > > so the kernel just stops there.
> > > >
> > >
> > > Ok. We have CLK_OF_DECLARE_DRIVER for that. Can you use that?
> > >
> >
> > I assume this will be resent. I haven't seen anything yet though.
> >
>
> It will, would you be willing to take it for this cycle if I manage to
> send it on Monday? (it seems that we will have an -rc8).
>
Well there are fixes to be made, so go at your own pace and don't stress
yourself to deliver it on Monday. I plan to stop picking most things
early next week.
^ permalink raw reply [flat|nested] 57+ messages in thread
end of thread, other threads:[~2018-10-12 19:50 UTC | newest]
Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-17 22:27 [PATCH 00/16] clk: at91: Rework DT bindings Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 01/16] clk: at91: audio-pll: fix audio pmc type Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 02/16] clk: at91: generated: SSCs don't have a gclk Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 03/16] clk: at91: h32mx: separate registration from DT parsing Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 04/16] clk: at91: audio-pll: " Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 05/16] clk: at91: generated: set audio_pll_allowed in at91_clk_register_generated() Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 06/16] clk: at91: allow clock registration from C code Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 07/16] clk: at91: add pmc_data struct and helpers Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 08/16] dt-bindings: clk: at91: Document new PMC binding Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-25 19:09 ` Rob Herring
2018-07-25 19:09 ` Rob Herring
2018-07-17 22:27 ` [PATCH 09/16] clk: at91: add new DT lookup function Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-25 19:10 ` Rob Herring
2018-07-25 19:10 ` Rob Herring
2018-07-17 22:27 ` [PATCH 10/16] clk: at91: add sama5d4 pmc driver Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 11/16] clk: at91: add sama5d2 PMC driver Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 12/16] clk: at91: add at91sam9x5 PMCs driver Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 13/16] clk: at91: move DT compatibility code to its own file Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 14/16] ARM: dts: at91: sama5d4: switch to new clock bindings Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 15/16] ARM: dts: at91: sama5d2: switch to new binding Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-17 22:27 ` [PATCH 16/16] ARM: dts: at91: at91sam9x5: switch to new clock bindings Alexandre Belloni
2018-07-17 22:27 ` Alexandre Belloni
2018-07-27 17:03 ` [PATCH 00/16] clk: at91: Rework DT bindings Stephen Boyd
2018-07-27 17:03 ` Stephen Boyd
2018-07-27 17:03 ` Stephen Boyd
2018-07-27 17:03 ` Stephen Boyd
2018-07-27 20:02 ` Alexandre Belloni
2018-07-27 20:02 ` Alexandre Belloni
2018-08-16 11:47 ` Alexandre Belloni
2018-08-16 11:47 ` Alexandre Belloni
2018-08-31 17:45 ` Stephen Boyd
2018-08-31 17:45 ` Stephen Boyd
2018-08-31 17:45 ` Stephen Boyd
2018-10-12 18:28 ` Stephen Boyd
2018-10-12 18:28 ` Stephen Boyd
2018-10-12 18:40 ` Alexandre Belloni
2018-10-12 18:40 ` Alexandre Belloni
2018-10-12 19:50 ` Stephen Boyd
2018-10-12 19:50 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.