From: Lubomir Rintel <lkundrak@v3.sk>
To: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Eric Miao <eric.y.miao@gmail.com>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Alan Stern <stern@rowland.harvard.edu>,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 13/14] DT: marvell,mmp2: add OTG PHY
Date: Wed, 22 Aug 2018 22:43:06 +0200 [thread overview]
Message-ID: <20180822204307.13251-14-lkundrak@v3.sk> (raw)
In-Reply-To: <20180822204307.13251-1-lkundrak@v3.sk>
The USB OTG PHY chip. To be used by the OTG controller.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp2.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..14a3448f38b9 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,6 +117,13 @@
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+ usb_otg_phy0: usb-otg-phy@d4207000 {
+ compatible = "marvell,mmp2-usb-phy";
+ reg = <0xd4207000 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
apb@d4000000 { /* APB */
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Eric Miao <eric.y.miao@gmail.com>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Alan Stern <stern@rowland.harvard.edu>,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [13/14] DT: marvell,mmp2: add OTG PHY
Date: Wed, 22 Aug 2018 22:43:06 +0200 [thread overview]
Message-ID: <20180822204307.13251-14-lkundrak@v3.sk> (raw)
The USB OTG PHY chip. To be used by the OTG controller.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp2.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..14a3448f38b9 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,6 +117,13 @@
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+ usb_otg_phy0: usb-otg-phy@d4207000 {
+ compatible = "marvell,mmp2-usb-phy";
+ reg = <0xd4207000 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
apb@d4000000 { /* APB */
WARNING: multiple messages have this Message-ID (diff)
From: lkundrak@v3.sk (Lubomir Rintel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 13/14] DT: marvell,mmp2: add OTG PHY
Date: Wed, 22 Aug 2018 22:43:06 +0200 [thread overview]
Message-ID: <20180822204307.13251-14-lkundrak@v3.sk> (raw)
In-Reply-To: <20180822204307.13251-1-lkundrak@v3.sk>
The USB OTG PHY chip. To be used by the OTG controller.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/mmp2.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..14a3448f38b9 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -117,6 +117,13 @@
reg-names = "mux status", "mux mask";
mrvl,intc-nr-irqs = <2>;
};
+
+ usb_otg_phy0: usb-otg-phy at d4207000 {
+ compatible = "marvell,mmp2-usb-phy";
+ reg = <0xd4207000 0x40>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
apb at d4000000 { /* APB */
--
2.17.1
next prev parent reply other threads:[~2018-08-22 20:44 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 20:42 [PATCH 00/14] Convert ehci-mv to DT Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [PATCH 01/14] phy: phy-pxa-usb: add a new driver Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [01/14] " Lubomir Rintel
2018-09-25 5:23 ` [PATCH 01/14] " Kishon Vijay Abraham I
2018-09-25 5:23 ` Kishon Vijay Abraham I
2018-09-25 5:23 ` [01/14] " Kishon Vijay Abraham I
2018-10-07 18:47 ` [PATCH 01/14] " Lubomir Rintel
2018-10-07 18:47 ` Lubomir Rintel
2018-10-07 18:47 ` [01/14] " Lubomir Rintel
2018-10-08 13:21 ` [PATCH 01/14] " Greg Kroah-Hartman
2018-10-08 13:21 ` Greg Kroah-Hartman
2018-10-08 13:21 ` [01/14] " Greg Kroah-Hartman
2018-10-09 14:51 ` [PATCH 01/14] " Lubomir Rintel
2018-10-09 14:51 ` Lubomir Rintel
2018-10-09 14:51 ` [01/14] " Lubomir Rintel
2018-10-09 14:57 ` [PATCH 01/14] " Greg Kroah-Hartman
2018-10-09 14:57 ` Greg Kroah-Hartman
2018-10-09 14:57 ` [01/14] " Greg Kroah-Hartman
2018-08-22 20:42 ` [PATCH 02/14] dt-bindings: phy-pxa-usb: add bindings Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [02/14] " Lubomir Rintel
2018-11-05 9:19 ` [PATCH 02/14] " Pavel Machek
2018-11-05 9:19 ` Pavel Machek
2018-11-05 9:19 ` [02/14] " Pavel Machek
2018-08-22 20:42 ` [PATCH 03/14] USB: EHCI: make ehci-mv a separate driver Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [03/14] " Lubomir Rintel
2018-08-22 20:42 ` [PATCH 04/14] ARM: mmp: add a pxa-usb-phy device Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [04/14] " Lubomir Rintel
2018-08-22 20:42 ` [PATCH 05/14] ARM: ttc_dkb: add an instance of pxa-usb-phy Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [05/14] " Lubomir Rintel
2018-11-05 9:19 ` [PATCH 05/14] " Pavel Machek
2018-11-05 9:19 ` Pavel Machek
2018-11-05 9:19 ` [05/14] " Pavel Machek
2018-08-22 20:42 ` [PATCH 06/14] ARM: aspenite: " Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [06/14] " Lubomir Rintel
2018-11-05 9:19 ` [PATCH 06/14] " Pavel Machek
2018-11-05 9:19 ` Pavel Machek
2018-11-05 9:19 ` [06/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 07/14] USB: EHCI: ehci-mv: remove private_init Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [07/14] " Lubomir Rintel
2018-08-22 20:43 ` [PATCH 08/14] USB: EHCI: ehci-mv: use phy-pxa-usb Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [08/14] " Lubomir Rintel
2018-08-22 20:43 ` [PATCH 09/14] USB: phy-mv-usb: " Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [09/14] " Lubomir Rintel
2018-11-05 9:19 ` [PATCH 09/14] " Pavel Machek
2018-11-05 9:19 ` Pavel Machek
2018-11-05 9:19 ` [09/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 10/14] USB: gadget: mv-udc: " Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [10/14] " Lubomir Rintel
2018-11-05 9:20 ` [PATCH 10/14] " Pavel Machek
2018-11-05 9:20 ` Pavel Machek
2018-11-05 9:20 ` [10/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 11/14] USB: EHCI: ehci-mv: add DT support Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [11/14] " Lubomir Rintel
2018-08-22 20:43 ` [PATCH 12/14] dt-bindings: ehci-mv: add bindings Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [12/14] " Lubomir Rintel
2018-11-02 20:47 ` [PATCH 12/14] " Pavel Machek
2018-11-02 20:47 ` Pavel Machek
2018-11-02 20:47 ` [12/14] " Pavel Machek
2018-08-22 20:43 ` Lubomir Rintel [this message]
2018-08-22 20:43 ` [PATCH 13/14] DT: marvell,mmp2: add OTG PHY Lubomir Rintel
2018-08-22 20:43 ` [13/14] " Lubomir Rintel
2018-11-05 9:20 ` [PATCH 13/14] " Pavel Machek
2018-11-05 9:20 ` Pavel Machek
2018-11-05 9:20 ` [13/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 14/14] DT: marvell,mmp2: add USB OTG host controller Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel
2018-08-22 20:43 ` [14/14] " Lubomir Rintel
2018-11-05 9:20 ` [PATCH 14/14] " Pavel Machek
2018-11-05 9:20 ` Pavel Machek
2018-11-05 9:20 ` [14/14] " Pavel Machek
2018-08-28 15:04 ` [PATCH 00/14] Convert ehci-mv to DT Alan Stern
2018-08-28 15:04 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180822204307.13251-14-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=eric.y.miao@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.