All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lubomir Rintel <lkundrak@v3.sk>
To: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Eric Miao <eric.y.miao@gmail.com>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 08/14] USB: EHCI: ehci-mv: use phy-pxa-usb
Date: Wed, 22 Aug 2018 22:43:01 +0200	[thread overview]
Message-ID: <20180822204307.13251-9-lkundrak@v3.sk> (raw)
In-Reply-To: <20180822204307.13251-1-lkundrak@v3.sk>

Use a proper PHY driver, instead of hooks to a board support package.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/devices.c | 11 +---------
 drivers/usb/host/ehci-mv.c  | 44 ++++++++++++++++++-------------------
 2 files changed, 23 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index d162fabd38e7..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -298,21 +298,12 @@ struct platform_device pxa168_device_u2o = {
 
 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 struct resource pxa168_u2oehci_resources[] = {
-	/* regbase */
 	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.start	= PXA168_U2O_REGBASE,
 		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
 	},
-	/* phybase */
 	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
 		.start	= IRQ_PXA168_USB1,
 		.end	= IRQ_PXA168_USB1,
 		.flags	= IORESOURCE_IRQ,
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 705d1b43b2dd..43b300c90875 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -18,6 +18,9 @@
 
 #include "ehci.h"
 
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
 #define CAPLENGTH_MASK         (0xff)
 
 #define hcd_to_ehci_hcd_mv(h) ((struct ehci_hcd_mv *)hcd_to_ehci(h)->priv)
@@ -26,13 +29,14 @@ struct ehci_hcd_mv {
 	/* Which mode does this ehci running OTG/Host ? */
 	int mode;
 
-	void __iomem *phy_regs;
+	void __iomem *base;
 	void __iomem *cap_regs;
 	void __iomem *op_regs;
 
 	struct usb_phy *otg;
 
 	struct mv_usb_platform_data *pdata;
+	struct phy *phy;
 
 	struct clk *clk;
 };
@@ -49,22 +53,13 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	int retval;
-
 	ehci_clock_enable(ehci_mv);
-	if (ehci_mv->pdata->phy_init) {
-		retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
-		if (retval)
-			return retval;
-	}
-
-	return 0;
+	return phy_init(ehci_mv->phy);
 }
 
 static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
 {
-	if (ehci_mv->pdata->phy_deinit)
-		ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+	phy_exit(ehci_mv->phy);
 	ehci_clock_disable(ehci_mv);
 }
 
@@ -121,6 +116,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	ehci_mv = hcd_to_ehci_hcd_mv(hcd);
 	ehci_mv->pdata = pdata;
 
+	ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
+	if (IS_ERR(ehci_mv->phy)) {
+		retval = PTR_ERR(ehci_mv->phy);
+		if (retval != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get phy.\n");
+		goto err_put_hcd;
+	}
+
 	ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ehci_mv->clk)) {
 		dev_err(&pdev->dev, "error getting clock\n");
@@ -128,17 +131,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
-	ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->phy_regs)) {
-		retval = PTR_ERR(ehci_mv->phy_regs);
-		goto err_put_hcd;
-	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
-	ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->cap_regs)) {
-		retval = PTR_ERR(ehci_mv->cap_regs);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ehci_mv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(ehci_mv->base)) {
+		retval = PTR_ERR(ehci_mv->base);
 		goto err_put_hcd;
 	}
 
@@ -148,6 +146,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
+	ehci_mv->cap_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->base + U2x_CAPREGS_OFFSET);
 	offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
 	ehci_mv->op_regs =
 		(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Eric Miao <eric.y.miao@gmail.com>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Lubomir Rintel <lkundrak@v3.sk>
Subject: [08/14] USB: EHCI: ehci-mv: use phy-pxa-usb
Date: Wed, 22 Aug 2018 22:43:01 +0200	[thread overview]
Message-ID: <20180822204307.13251-9-lkundrak@v3.sk> (raw)

Use a proper PHY driver, instead of hooks to a board support package.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/devices.c | 11 +---------
 drivers/usb/host/ehci-mv.c  | 44 ++++++++++++++++++-------------------
 2 files changed, 23 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index d162fabd38e7..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -298,21 +298,12 @@ struct platform_device pxa168_device_u2o = {
 
 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 struct resource pxa168_u2oehci_resources[] = {
-	/* regbase */
 	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.start	= PXA168_U2O_REGBASE,
 		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
 	},
-	/* phybase */
 	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
 		.start	= IRQ_PXA168_USB1,
 		.end	= IRQ_PXA168_USB1,
 		.flags	= IORESOURCE_IRQ,
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 705d1b43b2dd..43b300c90875 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -18,6 +18,9 @@
 
 #include "ehci.h"
 
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
 #define CAPLENGTH_MASK         (0xff)
 
 #define hcd_to_ehci_hcd_mv(h) ((struct ehci_hcd_mv *)hcd_to_ehci(h)->priv)
@@ -26,13 +29,14 @@ struct ehci_hcd_mv {
 	/* Which mode does this ehci running OTG/Host ? */
 	int mode;
 
-	void __iomem *phy_regs;
+	void __iomem *base;
 	void __iomem *cap_regs;
 	void __iomem *op_regs;
 
 	struct usb_phy *otg;
 
 	struct mv_usb_platform_data *pdata;
+	struct phy *phy;
 
 	struct clk *clk;
 };
@@ -49,22 +53,13 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	int retval;
-
 	ehci_clock_enable(ehci_mv);
-	if (ehci_mv->pdata->phy_init) {
-		retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
-		if (retval)
-			return retval;
-	}
-
-	return 0;
+	return phy_init(ehci_mv->phy);
 }
 
 static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
 {
-	if (ehci_mv->pdata->phy_deinit)
-		ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+	phy_exit(ehci_mv->phy);
 	ehci_clock_disable(ehci_mv);
 }
 
@@ -121,6 +116,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	ehci_mv = hcd_to_ehci_hcd_mv(hcd);
 	ehci_mv->pdata = pdata;
 
+	ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
+	if (IS_ERR(ehci_mv->phy)) {
+		retval = PTR_ERR(ehci_mv->phy);
+		if (retval != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get phy.\n");
+		goto err_put_hcd;
+	}
+
 	ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ehci_mv->clk)) {
 		dev_err(&pdev->dev, "error getting clock\n");
@@ -128,17 +131,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
-	ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->phy_regs)) {
-		retval = PTR_ERR(ehci_mv->phy_regs);
-		goto err_put_hcd;
-	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
-	ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->cap_regs)) {
-		retval = PTR_ERR(ehci_mv->cap_regs);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ehci_mv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(ehci_mv->base)) {
+		retval = PTR_ERR(ehci_mv->base);
 		goto err_put_hcd;
 	}
 
@@ -148,6 +146,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
+	ehci_mv->cap_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->base + U2x_CAPREGS_OFFSET);
 	offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
 	ehci_mv->op_regs =
 		(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);

WARNING: multiple messages have this Message-ID (diff)
From: lkundrak@v3.sk (Lubomir Rintel)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/14] USB: EHCI: ehci-mv: use phy-pxa-usb
Date: Wed, 22 Aug 2018 22:43:01 +0200	[thread overview]
Message-ID: <20180822204307.13251-9-lkundrak@v3.sk> (raw)
In-Reply-To: <20180822204307.13251-1-lkundrak@v3.sk>

Use a proper PHY driver, instead of hooks to a board support package.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 arch/arm/mach-mmp/devices.c | 11 +---------
 drivers/usb/host/ehci-mv.c  | 44 ++++++++++++++++++-------------------
 2 files changed, 23 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index d162fabd38e7..822b8be042b9 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -298,21 +298,12 @@ struct platform_device pxa168_device_u2o = {
 
 #if IS_ENABLED(CONFIG_USB_EHCI_MV_U2O)
 struct resource pxa168_u2oehci_resources[] = {
-	/* regbase */
 	[0] = {
-		.start	= PXA168_U2O_REGBASE + U2x_CAPREGS_OFFSET,
+		.start	= PXA168_U2O_REGBASE,
 		.end	= PXA168_U2O_REGBASE + USB_REG_RANGE,
 		.flags	= IORESOURCE_MEM,
-		.name	= "capregs",
 	},
-	/* phybase */
 	[1] = {
-		.start	= PXA168_U2O_PHYBASE,
-		.end	= PXA168_U2O_PHYBASE + USB_PHY_RANGE,
-		.flags	= IORESOURCE_MEM,
-		.name	= "phyregs",
-	},
-	[2] = {
 		.start	= IRQ_PXA168_USB1,
 		.end	= IRQ_PXA168_USB1,
 		.flags	= IORESOURCE_IRQ,
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 705d1b43b2dd..43b300c90875 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -18,6 +18,9 @@
 
 #include "ehci.h"
 
+/* registers */
+#define U2x_CAPREGS_OFFSET       0x100
+
 #define CAPLENGTH_MASK         (0xff)
 
 #define hcd_to_ehci_hcd_mv(h) ((struct ehci_hcd_mv *)hcd_to_ehci(h)->priv)
@@ -26,13 +29,14 @@ struct ehci_hcd_mv {
 	/* Which mode does this ehci running OTG/Host ? */
 	int mode;
 
-	void __iomem *phy_regs;
+	void __iomem *base;
 	void __iomem *cap_regs;
 	void __iomem *op_regs;
 
 	struct usb_phy *otg;
 
 	struct mv_usb_platform_data *pdata;
+	struct phy *phy;
 
 	struct clk *clk;
 };
@@ -49,22 +53,13 @@ static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
 
 static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	int retval;
-
 	ehci_clock_enable(ehci_mv);
-	if (ehci_mv->pdata->phy_init) {
-		retval = ehci_mv->pdata->phy_init(ehci_mv->phy_regs);
-		if (retval)
-			return retval;
-	}
-
-	return 0;
+	return phy_init(ehci_mv->phy);
 }
 
 static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
 {
-	if (ehci_mv->pdata->phy_deinit)
-		ehci_mv->pdata->phy_deinit(ehci_mv->phy_regs);
+	phy_exit(ehci_mv->phy);
 	ehci_clock_disable(ehci_mv);
 }
 
@@ -121,6 +116,14 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	ehci_mv = hcd_to_ehci_hcd_mv(hcd);
 	ehci_mv->pdata = pdata;
 
+	ehci_mv->phy = devm_phy_get(&pdev->dev, "usb");
+	if (IS_ERR(ehci_mv->phy)) {
+		retval = PTR_ERR(ehci_mv->phy);
+		if (retval != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get phy.\n");
+		goto err_put_hcd;
+	}
+
 	ehci_mv->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(ehci_mv->clk)) {
 		dev_err(&pdev->dev, "error getting clock\n");
@@ -128,17 +131,12 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs");
-	ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->phy_regs)) {
-		retval = PTR_ERR(ehci_mv->phy_regs);
-		goto err_put_hcd;
-	}
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs");
-	ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r);
-	if (IS_ERR(ehci_mv->cap_regs)) {
-		retval = PTR_ERR(ehci_mv->cap_regs);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ehci_mv->base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(ehci_mv->base)) {
+		retval = PTR_ERR(ehci_mv->base);
 		goto err_put_hcd;
 	}
 
@@ -148,6 +146,8 @@ static int mv_ehci_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
+	ehci_mv->cap_regs =
+		(void __iomem *) ((unsigned long) ehci_mv->base + U2x_CAPREGS_OFFSET);
 	offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK;
 	ehci_mv->op_regs =
 		(void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset);
-- 
2.17.1

  parent reply	other threads:[~2018-08-22 20:43 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-22 20:42 [PATCH 00/14] Convert ehci-mv to DT Lubomir Rintel
2018-08-22 20:42 ` Lubomir Rintel
2018-08-22 20:42 ` [PATCH 01/14] phy: phy-pxa-usb: add a new driver Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [01/14] " Lubomir Rintel
2018-09-25  5:23   ` [PATCH 01/14] " Kishon Vijay Abraham I
2018-09-25  5:23     ` Kishon Vijay Abraham I
2018-09-25  5:23     ` [01/14] " Kishon Vijay Abraham I
2018-10-07 18:47     ` [PATCH 01/14] " Lubomir Rintel
2018-10-07 18:47       ` Lubomir Rintel
2018-10-07 18:47       ` [01/14] " Lubomir Rintel
2018-10-08 13:21       ` [PATCH 01/14] " Greg Kroah-Hartman
2018-10-08 13:21         ` Greg Kroah-Hartman
2018-10-08 13:21         ` [01/14] " Greg Kroah-Hartman
2018-10-09 14:51         ` [PATCH 01/14] " Lubomir Rintel
2018-10-09 14:51           ` Lubomir Rintel
2018-10-09 14:51           ` [01/14] " Lubomir Rintel
2018-10-09 14:57           ` [PATCH 01/14] " Greg Kroah-Hartman
2018-10-09 14:57             ` Greg Kroah-Hartman
2018-10-09 14:57             ` [01/14] " Greg Kroah-Hartman
2018-08-22 20:42 ` [PATCH 02/14] dt-bindings: phy-pxa-usb: add bindings Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [02/14] " Lubomir Rintel
2018-11-05  9:19   ` [PATCH 02/14] " Pavel Machek
2018-11-05  9:19     ` Pavel Machek
2018-11-05  9:19     ` [02/14] " Pavel Machek
2018-08-22 20:42 ` [PATCH 03/14] USB: EHCI: make ehci-mv a separate driver Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [03/14] " Lubomir Rintel
2018-08-22 20:42 ` [PATCH 04/14] ARM: mmp: add a pxa-usb-phy device Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [04/14] " Lubomir Rintel
2018-08-22 20:42 ` [PATCH 05/14] ARM: ttc_dkb: add an instance of pxa-usb-phy Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [05/14] " Lubomir Rintel
2018-11-05  9:19   ` [PATCH 05/14] " Pavel Machek
2018-11-05  9:19     ` Pavel Machek
2018-11-05  9:19     ` [05/14] " Pavel Machek
2018-08-22 20:42 ` [PATCH 06/14] ARM: aspenite: " Lubomir Rintel
2018-08-22 20:42   ` Lubomir Rintel
2018-08-22 20:42   ` [06/14] " Lubomir Rintel
2018-11-05  9:19   ` [PATCH 06/14] " Pavel Machek
2018-11-05  9:19     ` Pavel Machek
2018-11-05  9:19     ` [06/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 07/14] USB: EHCI: ehci-mv: remove private_init Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [07/14] " Lubomir Rintel
2018-08-22 20:43 ` Lubomir Rintel [this message]
2018-08-22 20:43   ` [PATCH 08/14] USB: EHCI: ehci-mv: use phy-pxa-usb Lubomir Rintel
2018-08-22 20:43   ` [08/14] " Lubomir Rintel
2018-08-22 20:43 ` [PATCH 09/14] USB: phy-mv-usb: " Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [09/14] " Lubomir Rintel
2018-11-05  9:19   ` [PATCH 09/14] " Pavel Machek
2018-11-05  9:19     ` Pavel Machek
2018-11-05  9:19     ` [09/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 10/14] USB: gadget: mv-udc: " Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [10/14] " Lubomir Rintel
2018-11-05  9:20   ` [PATCH 10/14] " Pavel Machek
2018-11-05  9:20     ` Pavel Machek
2018-11-05  9:20     ` [10/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 11/14] USB: EHCI: ehci-mv: add DT support Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [11/14] " Lubomir Rintel
2018-08-22 20:43 ` [PATCH 12/14] dt-bindings: ehci-mv: add bindings Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [12/14] " Lubomir Rintel
2018-11-02 20:47   ` [PATCH 12/14] " Pavel Machek
2018-11-02 20:47     ` Pavel Machek
2018-11-02 20:47     ` [12/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 13/14] DT: marvell,mmp2: add OTG PHY Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [13/14] " Lubomir Rintel
2018-11-05  9:20   ` [PATCH 13/14] " Pavel Machek
2018-11-05  9:20     ` Pavel Machek
2018-11-05  9:20     ` [13/14] " Pavel Machek
2018-08-22 20:43 ` [PATCH 14/14] DT: marvell,mmp2: add USB OTG host controller Lubomir Rintel
2018-08-22 20:43   ` Lubomir Rintel
2018-08-22 20:43   ` [14/14] " Lubomir Rintel
2018-11-05  9:20   ` [PATCH 14/14] " Pavel Machek
2018-11-05  9:20     ` Pavel Machek
2018-11-05  9:20     ` [14/14] " Pavel Machek
2018-08-28 15:04 ` [PATCH 00/14] Convert ehci-mv to DT Alan Stern
2018-08-28 15:04   ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180822204307.13251-9-lkundrak@v3.sk \
    --to=lkundrak@v3.sk \
    --cc=eric.y.miao@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.