From: Janusz Krzysztofik <jmkrzyszt@gmail.com> To: Linus Walleij <linus.walleij@linaro.org> Cc: "Andrew Lunn" <andrew@lunn.ch>, "Ulf Hansson" <ulf.hansson@linaro.org>, linux-doc@vger.kernel.org, linux-iio@vger.kernel.org, "Dominik Brodowski" <linux@dominikbrodowski.net>, "Peter Rosin" <peda@axentia.se>, netdev@vger.kernel.org, linux-i2c@vger.kernel.org, "Peter Meerwald-Stadler" <pmeerw@pmeerw.net>, devel@driverdev.osuosl.org, "Florian Fainelli" <f.fainelli@gmail.com>, "Jonathan Corbet" <corbet@lwn.net>, "Janusz Krzysztofik" <jmkrzyszt@gmail.com>, "Kishon Vijay Abraham I" <kishon@ti.com>, "Tony Lindgren" <tony@atomide.com>, "Lukas Wunner" <lukas@wunner.de>, "Geert Uytterhoeven" <geert@linux-m68k.org>, linux-serial@vger.kernel.org, "Jiri Slaby" <jslaby@suse.com>, "Michael Hennerich" <Michael.Hennerich@analog.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, linux-gpio@vger.kernel.org, "Russell King" <rmk+kernel@armlinux.org.uk>, "Lars-Peter Clausen" <lars@metafoo.de> Subject: [PATCH v7 0/4] gpiolib: speed up GPIO array processing Date: Sun, 2 Sep 2018 14:01:40 +0200 [thread overview] Message-ID: <20180902120144.6855-1-jmkrzyszt@gmail.com> (raw) In-Reply-To: <20180831225616.29221-1-jmkrzyszt@gmail.com> The goal is to boost performance of get/set array functions while processing GPIO arrays which represent pins of a signle chip in hardware order. If resulting performance is close to PIO, GPIO API can be used for data I/O without much loss of speed. Created and tested on a low end Amstrad Delta board with NAND driver updated to use GPIO API for data I/O. Performance degrade compared to PIO is much better than before the optimization though not quite satisfactory on my test hardware. Janusz Krzysztofik (4): gpiolib: Pass bitmaps, not integer arrays, to get/set array gpiolib: Identify arrays matching GPIO hardware gpiolib: Pass array info to get/set array functions gpiolib: Implement fast processing path in get/set array Changelog: v7: - add more people to Cc: - authors and/or those who contributed most to the drivers in scope of the change, [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set: - avoid VLAs, use data source type bit number as bitmap size if not constant - great recommendation by Peter Rosin, thanks, - revert names of local variables declared with DECLARE_BITMAP() from 'value_bitmap' to original names of value arrays they replace (but not 'value_array') - inspired by Peter Rosin suggestion - thanks! drivers/gpio/gpio-max3191x.c: - use bitmap_alloc() to be more consistent with DECLARE_BITMAP() pattern used by other consumers, drivers/phy/motorola/phy-mapphone-mdm6600.c: - no need to mask unused bits of val before its assignment to bitmap, passing PHY_MDM6600_NR_CMD_LINES to gpiod_set_array_value() as array/ bitmap size provides sufficient protection. v6: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set - use DECLARE_BITMAP() macro for declaring value_bitmap - great idea by David Laight, thanks! drivers/auxdisplay/hd44780.c: - simplify the code and adjust comments as recommended by Geert Uytterhoeven - thanks!, drivers/i2c/muxes/i2c-mux-gpio.c: - drop .values member of struct gpiomux - details provided by Peter Rosin, thanks!, drivers/mux/gpio.c: - drop .val member of struct mux_gpio - details provided by Peter Rosin, thanks!, drivers/net/phy/mdio-mux-gpio.c: - drop .values member of struct mdio_mux_gpio_state and its processsing. v5: [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set - drivers/i2c/muxes/i2c-mux-gpio.c: - drop assigment of values to struct gpiomux.values, as recommended by Peter Rosin - thanks!, - mark the .values member of the structure as obsolete, - drivers/mux/gpio.c: - drop assigment of values to struct mux_gpio.val, also recommended by Peter Rosin - thanks!, - merk the .val member of the structure as obsolete, - drivers/auxdisplay/hd44780.c: - fix incorrect bitmap size, - use >>= operator to simplify notation, both catched by Miguel Ojeda - thanks!, - add Cc: clauses as well as Acked-by: collected so far. [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware - add Cc: clause. [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions - add Cc: clauses as well as Acked-by: collected so far. [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set - add Cc: clause. v4: That series was a follow up of the former "mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O" which already contained some changes to gpiolib. Those previous attempts were commented by Borris Brezillon who suggested using GPIO API modified to accept bitmaps, and by Linus Walleij who suggested still more great ideas for further immprovement of the proposed API changes - thanks! diffstat: Documentation/driver-api/gpio/board.rst | 15 + Documentation/driver-api/gpio/consumer.rst | 48 +++- drivers/auxdisplay/hd44780.c | 67 ++---- drivers/bus/ts-nbus.c | 20 -- drivers/gpio/gpio-max3191x.c | 16 + drivers/gpio/gpiolib.c | 273 ++++++++++++++++++++++------ drivers/gpio/gpiolib.h | 15 + drivers/i2c/muxes/i2c-mux-gpio.c | 16 - drivers/mmc/core/pwrseq_simple.c | 15 - drivers/mux/gpio.c | 16 - drivers/net/phy/mdio-mux-gpio.c | 13 - drivers/pcmcia/soc_common.c | 10 - drivers/phy/motorola/phy-mapphone-mdm6600.c | 17 - drivers/staging/iio/adc/ad7606.c | 12 - drivers/tty/serial/serial_mctrl_gpio.c | 9 include/linux/gpio/consumer.h | 35 ++- 16 files changed, 396 insertions(+), 201 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Janusz Krzysztofik <jmkrzyszt@gmail.com> To: Linus Walleij <linus.walleij@linaro.org> Cc: "Jonathan Corbet" <corbet@lwn.net>, "Miguel Ojeda Sandonis" <miguel.ojeda.sandonis@gmail.com>, "Peter Korsgaard" <peter.korsgaard@barco.com>, "Peter Rosin" <peda@axentia.se>, "Ulf Hansson" <ulf.hansson@linaro.org>, "Andrew Lunn" <andrew@lunn.ch>, "Florian Fainelli" <f.fainelli@gmail.com>, "David S. Miller" <davem@davemloft.net>, "Dominik Brodowski" <linux@dominikbrodowski.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Kishon Vijay Abraham I" <kishon@ti.com>, "Lars-Peter Clausen" <lars@metafoo.de>, "Michael Hennerich" <Michael.Hennerich@analog.com>, "Jonathan Cameron" <jic23@kernel.org>, "Hartmut Knaack" <knaack.h@gmx.de>, "Peter Meerwald-Stadler" <pmeerw@pmeerw.net>, "Jiri Slaby" <jslaby@suse.com>, "Willy Tarreau" <w@1wt.eu>, "Geert Uytterhoeven" <geert@linux-m68k.org>, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, linux-mmc@vger.kernel.org, netdev@vger.kernel.org, linux-iio@vger.kernel.org, devel@driverdev.osuosl.org, linux-serial@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, "Janusz Krzysztofik" <jmkrzyszt@gmail.com>, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>, "Lukas Wunner" <lukas@wunner.de>, "Rojhalat Ibrahim" <imr@rtschenk.de>, "Russell King" <rmk+kernel@armlinux.org.uk>, "Tony Lindgren" <tony@atomide.com>, "Yegor Yefremov" <yegorslists@googlemail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de> Subject: [PATCH v7 0/4] gpiolib: speed up GPIO array processing Date: Sun, 2 Sep 2018 14:01:40 +0200 [thread overview] Message-ID: <20180902120144.6855-1-jmkrzyszt@gmail.com> (raw) In-Reply-To: <20180831225616.29221-1-jmkrzyszt@gmail.com> The goal is to boost performance of get/set array functions while processing GPIO arrays which represent pins of a signle chip in hardware order. If resulting performance is close to PIO, GPIO API can be used for data I/O without much loss of speed. Created and tested on a low end Amstrad Delta board with NAND driver updated to use GPIO API for data I/O. Performance degrade compared to PIO is much better than before the optimization though not quite satisfactory on my test hardware. Janusz Krzysztofik (4): gpiolib: Pass bitmaps, not integer arrays, to get/set array gpiolib: Identify arrays matching GPIO hardware gpiolib: Pass array info to get/set array functions gpiolib: Implement fast processing path in get/set array Changelog: v7: - add more people to Cc: - authors and/or those who contributed most to the drivers in scope of the change, [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set: - avoid VLAs, use data source type bit number as bitmap size if not constant - great recommendation by Peter Rosin, thanks, - revert names of local variables declared with DECLARE_BITMAP() from 'value_bitmap' to original names of value arrays they replace (but not 'value_array') - inspired by Peter Rosin suggestion - thanks! drivers/gpio/gpio-max3191x.c: - use bitmap_alloc() to be more consistent with DECLARE_BITMAP() pattern used by other consumers, drivers/phy/motorola/phy-mapphone-mdm6600.c: - no need to mask unused bits of val before its assignment to bitmap, passing PHY_MDM6600_NR_CMD_LINES to gpiod_set_array_value() as array/ bitmap size provides sufficient protection. v6: [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set - use DECLARE_BITMAP() macro for declaring value_bitmap - great idea by David Laight, thanks! drivers/auxdisplay/hd44780.c: - simplify the code and adjust comments as recommended by Geert Uytterhoeven - thanks!, drivers/i2c/muxes/i2c-mux-gpio.c: - drop .values member of struct gpiomux - details provided by Peter Rosin, thanks!, drivers/mux/gpio.c: - drop .val member of struct mux_gpio - details provided by Peter Rosin, thanks!, drivers/net/phy/mdio-mux-gpio.c: - drop .values member of struct mdio_mux_gpio_state and its processsing. v5: [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set - drivers/i2c/muxes/i2c-mux-gpio.c: - drop assigment of values to struct gpiomux.values, as recommended by Peter Rosin - thanks!, - mark the .values member of the structure as obsolete, - drivers/mux/gpio.c: - drop assigment of values to struct mux_gpio.val, also recommended by Peter Rosin - thanks!, - merk the .val member of the structure as obsolete, - drivers/auxdisplay/hd44780.c: - fix incorrect bitmap size, - use >>= operator to simplify notation, both catched by Miguel Ojeda - thanks!, - add Cc: clauses as well as Acked-by: collected so far. [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware - add Cc: clause. [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions - add Cc: clauses as well as Acked-by: collected so far. [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set - add Cc: clause. v4: That series was a follow up of the former "mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O" which already contained some changes to gpiolib. Those previous attempts were commented by Borris Brezillon who suggested using GPIO API modified to accept bitmaps, and by Linus Walleij who suggested still more great ideas for further immprovement of the proposed API changes - thanks! diffstat: Documentation/driver-api/gpio/board.rst | 15 + Documentation/driver-api/gpio/consumer.rst | 48 +++- drivers/auxdisplay/hd44780.c | 67 ++---- drivers/bus/ts-nbus.c | 20 -- drivers/gpio/gpio-max3191x.c | 16 + drivers/gpio/gpiolib.c | 273 ++++++++++++++++++++++------ drivers/gpio/gpiolib.h | 15 + drivers/i2c/muxes/i2c-mux-gpio.c | 16 - drivers/mmc/core/pwrseq_simple.c | 15 - drivers/mux/gpio.c | 16 - drivers/net/phy/mdio-mux-gpio.c | 13 - drivers/pcmcia/soc_common.c | 10 - drivers/phy/motorola/phy-mapphone-mdm6600.c | 17 - drivers/staging/iio/adc/ad7606.c | 12 - drivers/tty/serial/serial_mctrl_gpio.c | 9 include/linux/gpio/consumer.h | 35 ++- 16 files changed, 396 insertions(+), 201 deletions(-)
next prev parent reply other threads:[~2018-09-02 12:01 UTC|newest] Thread overview: 477+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:17 ` Boris Brezillon 2018-07-19 6:17 ` Boris Brezillon 2018-07-20 17:57 ` Janusz Krzysztofik 2018-07-20 17:57 ` Janusz Krzysztofik 2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:22 ` Boris Brezillon 2018-07-19 6:22 ` Boris Brezillon 2018-07-20 18:02 ` Janusz Krzysztofik 2018-07-20 18:02 ` Janusz Krzysztofik 2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:23 ` Boris Brezillon 2018-07-19 6:23 ` Boris Brezillon 2018-07-20 18:12 ` Janusz Krzysztofik 2018-07-20 18:12 ` Janusz Krzysztofik 2018-07-20 19:29 ` Boris Brezillon 2018-07-20 19:29 ` Boris Brezillon 2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:25 ` Boris Brezillon 2018-07-19 6:25 ` Boris Brezillon 2018-07-20 18:14 ` Janusz Krzysztofik 2018-07-20 18:14 ` Janusz Krzysztofik 2018-07-20 19:29 ` Boris Brezillon 2018-07-20 19:29 ` Boris Brezillon 2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:28 ` Boris Brezillon 2018-07-19 6:28 ` Boris Brezillon 2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-29 20:29 ` Linus Walleij 2018-07-29 20:29 ` Linus Walleij 2018-08-03 1:52 ` Grygorii Strashko 2018-08-03 1:52 ` Grygorii Strashko 2018-08-03 1:52 ` Grygorii Strashko 2018-08-03 16:47 ` Linus Walleij 2018-08-03 16:47 ` Linus Walleij 2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:44 ` Boris Brezillon 2018-07-19 6:44 ` Boris Brezillon 2018-07-29 20:36 ` Linus Walleij 2018-07-29 20:36 ` Linus Walleij 2018-07-29 21:16 ` Boris Brezillon 2018-07-29 21:16 ` Boris Brezillon 2018-07-29 20:33 ` Linus Walleij 2018-07-29 20:33 ` Linus Walleij 2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik 2018-07-18 23:57 ` Janusz Krzysztofik 2018-07-19 6:47 ` Boris Brezillon 2018-07-19 6:47 ` Boris Brezillon 2018-07-20 18:38 ` Janusz Krzysztofik 2018-07-20 18:38 ` Janusz Krzysztofik 2018-07-20 19:48 ` Boris Brezillon 2018-07-20 19:48 ` Boris Brezillon 2018-07-19 6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon 2018-07-19 6:15 ` Boris Brezillon 2018-07-20 17:55 ` Janusz Krzysztofik 2018-07-20 17:55 ` Janusz Krzysztofik 2018-07-20 19:25 ` Boris Brezillon 2018-07-20 19:25 ` Boris Brezillon 2018-10-03 12:00 ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik 2018-10-03 12:30 ` Boris Brezillon 2018-10-03 13:55 ` Janusz Krzysztofik 2018-10-03 14:06 ` Boris Brezillon 2018-10-04 13:52 ` Janusz Krzysztofik 2018-10-04 13:59 ` Boris Brezillon 2018-10-04 14:11 ` Janusz Krzysztofik 2018-10-04 14:22 ` Boris Brezillon 2018-10-12 20:41 ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik 2018-10-12 20:41 ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik 2018-10-13 6:05 ` Boris Brezillon 2018-10-13 5:55 ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon 2018-10-15 19:41 ` [PATCH v3 1/3] " Janusz Krzysztofik 2018-10-15 19:41 ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik 2018-10-15 19:41 ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik 2018-11-11 20:53 ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal 2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 23:54 ` Marek Vasut 2018-08-06 23:54 ` Marek Vasut 2018-08-06 23:54 ` Marek Vasut 2018-08-07 21:55 ` Janusz Krzysztofik 2018-08-07 21:55 ` Janusz Krzysztofik 2018-08-07 21:55 ` Janusz Krzysztofik 2018-08-07 16:57 ` Boris Brezillon 2018-08-07 16:57 ` Boris Brezillon 2018-08-07 16:57 ` Boris Brezillon 2018-08-06 22:29 ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-07 16:59 ` Boris Brezillon 2018-08-07 16:59 ` Boris Brezillon 2018-08-07 16:59 ` Boris Brezillon 2018-08-06 22:29 ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-07 16:59 ` Boris Brezillon 2018-08-07 16:59 ` Boris Brezillon 2018-08-07 16:59 ` Boris Brezillon 2018-08-10 10:10 ` Linus Walleij 2018-08-10 10:10 ` Linus Walleij 2018-08-06 22:29 ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-07 17:00 ` Boris Brezillon 2018-08-07 17:00 ` Boris Brezillon 2018-08-07 17:00 ` Boris Brezillon 2018-08-10 10:11 ` Linus Walleij 2018-08-10 10:11 ` Linus Walleij 2018-08-06 22:29 ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 23:57 ` Marek Vasut 2018-08-06 23:57 ` Marek Vasut 2018-08-06 23:57 ` Marek Vasut 2018-08-07 17:06 ` Boris Brezillon 2018-08-07 17:06 ` Boris Brezillon 2018-08-07 17:06 ` Boris Brezillon 2018-08-07 17:11 ` Janusz Krzysztofik 2018-08-07 17:11 ` Janusz Krzysztofik 2018-08-07 17:11 ` Janusz Krzysztofik 2018-08-10 10:25 ` Linus Walleij 2018-08-10 10:25 ` Linus Walleij 2018-08-06 22:29 ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-07 18:57 ` Boris Brezillon 2018-08-07 18:57 ` Boris Brezillon 2018-08-07 18:57 ` Boris Brezillon 2018-08-07 18:57 ` Boris Brezillon 2018-08-08 16:55 ` Janusz Krzysztofik 2018-08-08 16:55 ` Janusz Krzysztofik 2018-08-08 16:55 ` Janusz Krzysztofik 2018-08-08 17:42 ` Miquel Raynal 2018-08-08 17:42 ` Miquel Raynal 2018-08-08 17:42 ` Miquel Raynal 2018-08-06 22:29 ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-07 17:02 ` Boris Brezillon 2018-08-07 17:02 ` Boris Brezillon 2018-08-07 17:02 ` Boris Brezillon 2018-08-07 17:15 ` Janusz Krzysztofik 2018-08-07 17:15 ` Janusz Krzysztofik 2018-08-07 17:15 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 23:29 ` Linus Walleij 2018-08-06 23:29 ` Linus Walleij 2018-08-06 23:29 ` Linus Walleij 2018-08-07 16:50 ` Janusz Krzysztofik 2018-08-07 16:50 ` Janusz Krzysztofik 2018-08-07 16:50 ` Janusz Krzysztofik 2018-08-07 17:10 ` Boris Brezillon 2018-08-07 17:10 ` Boris Brezillon 2018-08-07 17:10 ` Boris Brezillon 2018-08-07 17:14 ` Boris Brezillon 2018-08-07 17:14 ` Boris Brezillon 2018-08-07 17:14 ` Boris Brezillon 2018-08-07 17:19 ` Janusz Krzysztofik 2018-08-07 17:19 ` Janusz Krzysztofik 2018-08-07 17:19 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 22:29 ` Janusz Krzysztofik 2018-08-06 23:43 ` Linus Walleij 2018-08-06 23:43 ` Linus Walleij 2018-08-06 23:43 ` Linus Walleij 2018-08-07 17:29 ` Janusz Krzysztofik 2018-08-07 17:29 ` Janusz Krzysztofik 2018-08-07 17:29 ` Janusz Krzysztofik 2018-08-07 17:47 ` Boris Brezillon 2018-08-07 17:47 ` Boris Brezillon 2018-08-07 17:47 ` Boris Brezillon 2018-08-10 10:55 ` Linus Walleij 2018-08-10 10:55 ` Linus Walleij 2018-08-13 22:34 ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-16 7:30 ` Boris Brezillon 2018-08-16 7:30 ` Boris Brezillon 2018-08-13 22:34 ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-13 22:34 ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik 2018-08-13 22:34 ` Janusz Krzysztofik 2018-08-16 7:39 ` Boris Brezillon 2018-08-16 7:39 ` Boris Brezillon 2018-08-20 21:39 ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik 2018-08-20 21:39 ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik 2018-08-20 21:39 ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik 2018-08-20 21:39 ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik 2018-08-24 12:57 ` Boris Brezillon 2018-09-05 6:47 ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal 2018-09-05 20:53 ` Janusz Krzysztofik 2018-09-07 16:45 ` Tony Lindgren 2018-09-19 8:46 ` Miquel Raynal 2018-09-19 22:52 ` [PATCH v5 " Janusz Krzysztofik 2018-09-19 22:52 ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik 2018-09-19 22:52 ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik 2018-09-19 22:52 ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik 2018-09-23 11:35 ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal 2018-08-20 23:43 ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-21 6:49 ` Peter Rosin 2018-08-21 6:49 ` Peter Rosin 2018-08-21 6:52 ` Peter Rosin 2018-08-21 6:52 ` Peter Rosin 2018-08-29 12:03 ` Miguel Ojeda 2018-08-29 12:03 ` Miguel Ojeda 2018-08-29 12:03 ` Miguel Ojeda 2018-08-29 18:01 ` Janusz Krzysztofik 2018-08-29 18:01 ` Janusz Krzysztofik 2018-08-29 18:01 ` Janusz Krzysztofik 2018-08-20 23:43 ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-20 23:43 ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik 2018-08-20 23:43 ` Janusz Krzysztofik 2018-08-29 9:06 ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij 2018-08-29 9:06 ` Linus Walleij 2018-08-29 9:06 ` Linus Walleij 2018-08-29 18:16 ` Janusz Krzysztofik 2018-08-29 18:16 ` Janusz Krzysztofik 2018-08-29 18:16 ` Janusz Krzysztofik 2018-08-29 10:19 ` Ulf Hansson 2018-08-29 10:19 ` Ulf Hansson 2018-08-29 20:48 ` [PATH v5 " Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-30 4:30 ` Peter Rosin 2018-08-30 4:30 ` Peter Rosin 2018-08-30 7:40 ` Geert Uytterhoeven 2018-08-30 7:40 ` Geert Uytterhoeven 2018-08-30 7:40 ` Geert Uytterhoeven 2018-08-30 11:10 ` Miguel Ojeda 2018-08-30 11:10 ` Miguel Ojeda 2018-08-30 11:10 ` Miguel Ojeda 2018-08-30 15:35 ` David Laight 2018-08-30 15:35 ` David Laight 2018-08-30 15:35 ` David Laight 2018-09-02 10:19 ` Janusz Krzysztofik 2018-09-02 10:19 ` Janusz Krzysztofik 2018-09-02 10:19 ` Janusz Krzysztofik 2018-08-31 9:14 ` Linus Walleij 2018-08-31 9:14 ` Linus Walleij 2018-08-29 20:48 ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:48 ` Janusz Krzysztofik 2018-08-29 20:49 ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik 2018-08-29 20:49 ` Janusz Krzysztofik 2018-08-29 20:49 ` Janusz Krzysztofik 2018-08-31 22:56 ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-09-01 0:23 ` Peter Rosin 2018-09-01 0:23 ` Peter Rosin 2018-09-04 15:28 ` kbuild test robot 2018-09-04 15:28 ` kbuild test robot 2018-09-04 15:28 ` kbuild test robot 2018-09-04 15:28 ` kbuild test robot 2018-09-04 15:28 ` kbuild test robot 2018-09-04 15:28 ` kbuild test robot 2018-08-31 22:56 ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-09-04 15:27 ` kbuild test robot 2018-09-04 15:27 ` kbuild test robot 2018-09-04 15:27 ` kbuild test robot 2018-08-31 22:56 ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-08-31 22:56 ` Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik [this message] 2018-09-02 12:01 ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik 2018-09-02 12:01 ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik 2018-09-02 13:21 ` Lukas Wunner 2018-09-02 13:21 ` Lukas Wunner 2018-09-02 13:21 ` Lukas Wunner 2018-09-03 4:31 ` Matthew Wilcox 2018-09-03 4:31 ` Matthew Wilcox 2018-09-03 4:31 ` Matthew Wilcox 2018-09-03 14:24 ` Geert Uytterhoeven 2018-09-03 14:24 ` Geert Uytterhoeven 2018-09-03 14:24 ` Geert Uytterhoeven 2018-09-03 15:07 ` Geert Uytterhoeven 2018-09-03 15:07 ` Geert Uytterhoeven 2018-09-03 15:07 ` Geert Uytterhoeven 2018-09-04 15:29 ` kbuild test robot 2018-09-04 15:29 ` kbuild test robot 2018-09-04 15:29 ` kbuild test robot 2018-09-05 6:46 ` kbuild test robot 2018-09-05 6:46 ` kbuild test robot 2018-09-05 6:46 ` kbuild test robot 2018-09-02 12:01 ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik 2018-09-02 12:01 ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik 2018-09-03 14:21 ` Geert Uytterhoeven 2018-09-03 14:21 ` Geert Uytterhoeven 2018-09-03 14:21 ` Geert Uytterhoeven 2018-09-04 15:23 ` kbuild test robot 2018-09-04 15:23 ` kbuild test robot 2018-09-04 15:23 ` kbuild test robot 2018-09-05 7:11 ` kbuild test robot 2018-09-05 7:11 ` kbuild test robot 2018-09-05 7:11 ` kbuild test robot 2018-09-02 12:01 ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik 2018-09-02 12:01 ` Janusz Krzysztofik [not found] ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com> 2018-09-20 10:11 ` Marek Szyprowski 2018-09-20 10:11 ` Marek Szyprowski 2018-09-20 10:11 ` Marek Szyprowski 2018-09-20 15:48 ` Janusz Krzysztofik 2018-09-20 15:48 ` Janusz Krzysztofik 2018-09-20 15:48 ` Janusz Krzysztofik 2018-09-20 15:48 ` Janusz Krzysztofik 2018-09-20 16:21 ` Janusz Krzysztofik 2018-09-20 16:21 ` Janusz Krzysztofik 2018-09-20 16:21 ` Janusz Krzysztofik 2018-09-21 8:18 ` Marek Szyprowski 2018-09-21 8:18 ` Marek Szyprowski 2018-09-21 10:51 ` Janusz Krzysztofik 2018-09-21 10:51 ` Janusz Krzysztofik 2018-09-21 11:26 ` Janusz Krzysztofik 2018-09-21 11:26 ` Janusz Krzysztofik 2018-09-21 11:26 ` Janusz Krzysztofik 2018-09-21 14:14 ` Marek Szyprowski 2018-09-21 14:14 ` Marek Szyprowski 2018-09-21 14:14 ` Marek Szyprowski 2018-09-23 10:43 ` Janusz Krzysztofik 2018-09-23 10:43 ` Janusz Krzysztofik 2018-09-23 23:53 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik 2018-09-23 23:53 ` Janusz Krzysztofik 2018-09-23 23:53 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik 2018-09-23 23:53 ` Janusz Krzysztofik 2018-09-23 23:53 ` Janusz Krzysztofik 2018-09-24 8:11 ` Linus Walleij 2018-09-24 8:11 ` Linus Walleij 2018-09-24 8:11 ` Linus Walleij 2018-09-29 12:20 ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik 2018-09-29 12:20 ` Janusz Krzysztofik 2018-10-01 6:46 ` Marek Szyprowski 2018-10-01 6:46 ` Marek Szyprowski 2018-10-01 9:37 ` Linus Walleij 2018-10-01 9:37 ` Linus Walleij 2018-10-01 9:37 ` Linus Walleij 2018-09-23 23:53 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik 2018-09-23 23:53 ` Janusz Krzysztofik 2018-09-23 23:53 ` Janusz Krzysztofik 2018-09-24 8:13 ` Linus Walleij 2018-09-24 8:13 ` Linus Walleij 2018-09-24 8:13 ` Linus Walleij 2018-09-24 9:43 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski 2018-09-24 9:43 ` Marek Szyprowski 2018-09-24 9:43 ` Marek Szyprowski 2018-09-24 11:08 ` Janusz Krzysztofik 2018-09-24 11:08 ` Janusz Krzysztofik 2018-09-24 11:38 ` Marek Szyprowski 2018-09-24 11:38 ` Marek Szyprowski 2018-09-24 11:38 ` Marek Szyprowski 2018-09-24 14:18 ` Janusz Krzysztofik 2018-09-24 14:18 ` Janusz Krzysztofik 2018-09-24 14:18 ` Janusz Krzysztofik 2018-09-25 19:24 ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik 2018-09-26 7:50 ` Linus Walleij 2018-09-26 8:14 ` Marek Szyprowski [not found] ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com> 2018-09-26 8:27 ` Marek Szyprowski 2018-10-12 19:09 ` [RFT PATCH] " Janusz Krzysztofik 2018-10-12 19:09 ` Janusz Krzysztofik 2018-10-12 19:09 ` Janusz Krzysztofik 2018-10-12 19:09 ` Janusz Krzysztofik 2018-10-15 8:32 ` Marek Szyprowski 2018-10-15 8:32 ` Marek Szyprowski 2018-10-15 8:32 ` Marek Szyprowski 2018-10-15 8:32 ` Marek Szyprowski 2018-10-15 10:29 ` Ulf Hansson 2018-10-15 10:29 ` Ulf Hansson 2018-10-15 10:29 ` Ulf Hansson 2018-10-15 10:29 ` Ulf Hansson 2018-10-15 14:27 ` Linus Walleij 2018-10-15 14:27 ` Linus Walleij 2018-10-15 14:27 ` Linus Walleij 2018-10-15 14:27 ` Linus Walleij 2018-09-20 18:05 ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter 2018-09-20 18:05 ` Dan Carpenter 2018-09-20 15:49 ` Linus Walleij 2018-09-20 15:49 ` Linus Walleij 2018-09-20 15:49 ` Linus Walleij 2018-09-05 21:50 ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-05 21:50 ` Janusz Krzysztofik 2018-09-13 9:22 ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij 2018-09-13 9:22 ` Linus Walleij 2018-09-13 9:22 ` Linus Walleij 2018-09-19 18:08 ` Linus Walleij 2018-09-19 18:08 ` Linus Walleij 2018-09-19 18:08 ` Linus Walleij 2018-11-21 11:08 ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik 2018-11-21 11:08 ` Janusz Krzysztofik 2018-11-21 11:08 ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik 2018-11-21 11:08 ` Janusz Krzysztofik 2018-11-23 17:02 ` Tony Lindgren 2018-11-23 17:02 ` Tony Lindgren 2018-11-21 11:08 ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik 2018-11-21 11:08 ` Janusz Krzysztofik 2018-11-21 11:08 ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik 2018-11-21 11:08 ` Janusz Krzysztofik 2018-11-21 14:53 ` Boris Brezillon 2018-11-21 14:53 ` Boris Brezillon 2018-11-21 11:08 ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik 2018-11-21 11:08 ` Janusz Krzysztofik 2018-11-21 14:56 ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon 2018-11-21 14:56 ` Boris Brezillon 2018-11-23 17:03 ` Tony Lindgren 2018-11-23 17:03 ` Tony Lindgren 2018-12-07 8:04 ` Miquel Raynal 2018-12-07 8:04 ` Miquel Raynal 2018-12-07 16:10 ` Tony Lindgren 2018-12-07 16:10 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180902120144.6855-1-jmkrzyszt@gmail.com \ --to=jmkrzyszt@gmail.com \ --cc=Michael.Hennerich@analog.com \ --cc=andrew@lunn.ch \ --cc=corbet@lwn.net \ --cc=devel@driverdev.osuosl.org \ --cc=f.fainelli@gmail.com \ --cc=geert@linux-m68k.org \ --cc=jslaby@suse.com \ --cc=kishon@ti.com \ --cc=lars@metafoo.de \ --cc=linus.walleij@linaro.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-iio@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux@dominikbrodowski.net \ --cc=lukas@wunner.de \ --cc=netdev@vger.kernel.org \ --cc=peda@axentia.se \ --cc=pmeerw@pmeerw.net \ --cc=rmk+kernel@armlinux.org.uk \ --cc=tony@atomide.com \ --cc=u.kleine-koenig@pengutronix.de \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.