All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut@gmail.com>
To: Janusz Krzysztofik <jmkrzyszt@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Tony Lindgren <tony@atomide.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-doc@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write
Date: Tue, 7 Aug 2018 01:57:14 +0200	[thread overview]
Message-ID: <f4ebe9bf-8ca8-9ad2-3e48-697266b6962b@gmail.com> (raw)
In-Reply-To: <20180806222918.12644-6-jmkrzyszt@gmail.com>

On 08/07/2018 12:29 AM, Janusz Krzysztofik wrote:
> Don't readw()/writew() data directly from/to GPIO port which is under
> control of gpio-omap driver, use GPIO API instead.
> 
> Degrade of performance on Amstrad Delta is completely not acceptable.

I'd expect that changing from direct PIO to access through GPIO API
would degrade the performance. Maybe I misunderstood something ?

> The driver should work with any 8+-bit bidirectional GPIO port, not
> only OMAP.
> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> ---
>  drivers/mtd/nand/raw/ams-delta.c | 97 ++++++++++++++++------------------------
>  1 file changed, 38 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
> index 09d6901fc94d..78996ddf82e0 100644
> --- a/drivers/mtd/nand/raw/ams-delta.c
> +++ b/drivers/mtd/nand/raw/ams-delta.c
> @@ -24,13 +24,10 @@
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/rawnand.h>
>  #include <linux/mtd/partitions.h>
> -#include <linux/platform_data/gpio-omap.h>
> +#include <linux/platform_device.h>
>  
> -#include <asm/io.h>
>  #include <asm/sizes.h>
>  
> -#include <mach/hardware.h>
> -
>  /*
>   * MTD structure for E3 (Delta)
>   */
> @@ -44,7 +41,7 @@ struct ams_delta_nand {
>  	struct gpio_desc	*gpiod_nwe;
>  	struct gpio_desc	*gpiod_ale;
>  	struct gpio_desc	*gpiod_cle;
> -	void __iomem		*io_base;
> +	struct gpio_descs	*data_gpiods;
>  };
>  
>  /*
> @@ -76,10 +73,14 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  {
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = byte;
> +	int i;
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_output_raw(data_gpiods->desc[i],
> +					   test_bit(i, &bits));
>  
> -	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
> -	writew(byte, this->IO_ADDR_W);
>  	gpiod_set_value(priv->gpiod_nwe, 0);
>  	ndelay(40);
>  	gpiod_set_value(priv->gpiod_nwe, 1);
> @@ -87,18 +88,28 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  
>  static u_char ams_delta_read_byte(struct mtd_info *mtd)
>  {
> -	u_char res;
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = 0;
> +	int i, value_array[data_gpiods->ndescs];
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_input(data_gpiods->desc[i]);
>  
>  	gpiod_set_value(priv->gpiod_nre, 0);
>  	ndelay(40);
> -	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
> -	res = readw(this->IO_ADDR_R);
> +
> +	gpiod_get_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
> +				  value_array);
> +
>  	gpiod_set_value(priv->gpiod_nre, 1);
>  
> -	return res;
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		if (value_array[i])
> +			__set_bit(i, &bits);
> +
> +	return bits;
>  }
>  
>  static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
> @@ -159,14 +170,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	struct ams_delta_nand *priv;
>  	struct nand_chip *this;
>  	struct mtd_info *mtd;
> -	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	void __iomem *io_base;
> -	struct gpio_descs *data_gpiods;
>  	int err = 0;
>  
> -	if (!res)
> -		return -ENXIO;
> -
>  	/* Allocate memory for MTD device structure and private data */
>  	priv = devm_kzalloc(&pdev->dev, sizeof(struct ams_delta_nand),
>  			    GFP_KERNEL);
> @@ -179,25 +184,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	mtd = nand_to_mtd(this);
>  	mtd->dev.parent = &pdev->dev;
>  
> -	/*
> -	 * Don't try to request the memory region from here,
> -	 * it should have been already requested from the
> -	 * gpio-omap driver and requesting it again would fail.
> -	 */
> -
> -	io_base = ioremap(res->start, resource_size(res));
> -	if (io_base == NULL) {
> -		dev_err(&pdev->dev, "ioremap failed\n");
> -		err = -EIO;
> -		goto out_free;
> -	}
> -
> -	priv->io_base = io_base;
>  	nand_set_controller_data(this, priv);
>  
> -	/* Set address of NAND IO lines */
> -	this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH;
> -	this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT;
>  	this->read_byte = ams_delta_read_byte;
>  	this->write_buf = ams_delta_write_buf;
>  	this->read_buf = ams_delta_read_buf;
> @@ -207,7 +195,7 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_rdy)) {
>  		err = PTR_ERR(priv->gpiod_rdy);
>  		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	if (priv->gpiod_rdy)
> @@ -225,66 +213,60 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_nwp)) {
>  		err = PTR_ERR(priv->gpiod_nwp);
>  		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nce)) {
>  		err = PTR_ERR(priv->gpiod_nce);
>  		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nre)) {
>  		err = PTR_ERR(priv->gpiod_nre);
>  		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nwe)) {
>  		err = PTR_ERR(priv->gpiod_nwe);
>  		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_ale)) {
>  		err = PTR_ERR(priv->gpiod_ale);
>  		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_cle)) {
>  		err = PTR_ERR(priv->gpiod_cle);
>  		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  	/* Request array of data pins, initialize them as input */
> -	data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> -	if (IS_ERR(data_gpiods)) {
> -		err = PTR_ERR(data_gpiods);
> +	priv->data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> +	if (IS_ERR(priv->data_gpiods)) {
> +		err = PTR_ERR(priv->data_gpiods);
>  		dev_err(&pdev->dev, "data GPIO request failed: %d\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	/* Scan to find existence of the device */
>  	err = nand_scan(mtd, 1);
>  	if (err)
> -		goto out_mtd;
> +		return err;
>  
>  	/* Register the partitions */
>  	mtd_device_register(mtd, partition_info, ARRAY_SIZE(partition_info));
>  
> -	goto out;
> -
> - out_mtd:
> -	iounmap(io_base);
> -out_free:
> - out:
> -	return err;
> +	return 0;
>  }
>  
>  /*
> @@ -294,13 +276,10 @@ static int ams_delta_cleanup(struct platform_device *pdev)
>  {
>  	struct ams_delta_nand *priv = platform_get_drvdata(pdev);
>  	struct mtd_info *mtd = nand_to_mtd(&priv->nand_chip);
> -	void __iomem *io_base = priv->io_base;
>  
> -	/* Release resources, unregister device */
> +	/* Unregister device */
>  	nand_release(mtd);
>  
> -	iounmap(io_base);
> -
>  	return 0;
>  }
>  
> 


-- 
Best regards,
Marek Vasut

WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marek.vasut@gmail.com>
To: Janusz Krzysztofik <jmkrzyszt@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Tony Lindgren <tony@atomide.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-mtd@lists.infradead.org, linux-doc@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write
Date: Tue, 7 Aug 2018 01:57:14 +0200	[thread overview]
Message-ID: <f4ebe9bf-8ca8-9ad2-3e48-697266b6962b@gmail.com> (raw)
In-Reply-To: <20180806222918.12644-6-jmkrzyszt@gmail.com>

On 08/07/2018 12:29 AM, Janusz Krzysztofik wrote:
> Don't readw()/writew() data directly from/to GPIO port which is under
> control of gpio-omap driver, use GPIO API instead.
> 
> Degrade of performance on Amstrad Delta is completely not acceptable.

I'd expect that changing from direct PIO to access through GPIO API
would degrade the performance. Maybe I misunderstood something ?

> The driver should work with any 8+-bit bidirectional GPIO port, not
> only OMAP.
> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> ---
>  drivers/mtd/nand/raw/ams-delta.c | 97 ++++++++++++++++------------------------
>  1 file changed, 38 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
> index 09d6901fc94d..78996ddf82e0 100644
> --- a/drivers/mtd/nand/raw/ams-delta.c
> +++ b/drivers/mtd/nand/raw/ams-delta.c
> @@ -24,13 +24,10 @@
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/rawnand.h>
>  #include <linux/mtd/partitions.h>
> -#include <linux/platform_data/gpio-omap.h>
> +#include <linux/platform_device.h>
>  
> -#include <asm/io.h>
>  #include <asm/sizes.h>
>  
> -#include <mach/hardware.h>
> -
>  /*
>   * MTD structure for E3 (Delta)
>   */
> @@ -44,7 +41,7 @@ struct ams_delta_nand {
>  	struct gpio_desc	*gpiod_nwe;
>  	struct gpio_desc	*gpiod_ale;
>  	struct gpio_desc	*gpiod_cle;
> -	void __iomem		*io_base;
> +	struct gpio_descs	*data_gpiods;
>  };
>  
>  /*
> @@ -76,10 +73,14 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  {
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = byte;
> +	int i;
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_output_raw(data_gpiods->desc[i],
> +					   test_bit(i, &bits));
>  
> -	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
> -	writew(byte, this->IO_ADDR_W);
>  	gpiod_set_value(priv->gpiod_nwe, 0);
>  	ndelay(40);
>  	gpiod_set_value(priv->gpiod_nwe, 1);
> @@ -87,18 +88,28 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  
>  static u_char ams_delta_read_byte(struct mtd_info *mtd)
>  {
> -	u_char res;
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = 0;
> +	int i, value_array[data_gpiods->ndescs];
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_input(data_gpiods->desc[i]);
>  
>  	gpiod_set_value(priv->gpiod_nre, 0);
>  	ndelay(40);
> -	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
> -	res = readw(this->IO_ADDR_R);
> +
> +	gpiod_get_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
> +				  value_array);
> +
>  	gpiod_set_value(priv->gpiod_nre, 1);
>  
> -	return res;
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		if (value_array[i])
> +			__set_bit(i, &bits);
> +
> +	return bits;
>  }
>  
>  static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
> @@ -159,14 +170,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	struct ams_delta_nand *priv;
>  	struct nand_chip *this;
>  	struct mtd_info *mtd;
> -	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	void __iomem *io_base;
> -	struct gpio_descs *data_gpiods;
>  	int err = 0;
>  
> -	if (!res)
> -		return -ENXIO;
> -
>  	/* Allocate memory for MTD device structure and private data */
>  	priv = devm_kzalloc(&pdev->dev, sizeof(struct ams_delta_nand),
>  			    GFP_KERNEL);
> @@ -179,25 +184,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	mtd = nand_to_mtd(this);
>  	mtd->dev.parent = &pdev->dev;
>  
> -	/*
> -	 * Don't try to request the memory region from here,
> -	 * it should have been already requested from the
> -	 * gpio-omap driver and requesting it again would fail.
> -	 */
> -
> -	io_base = ioremap(res->start, resource_size(res));
> -	if (io_base == NULL) {
> -		dev_err(&pdev->dev, "ioremap failed\n");
> -		err = -EIO;
> -		goto out_free;
> -	}
> -
> -	priv->io_base = io_base;
>  	nand_set_controller_data(this, priv);
>  
> -	/* Set address of NAND IO lines */
> -	this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH;
> -	this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT;
>  	this->read_byte = ams_delta_read_byte;
>  	this->write_buf = ams_delta_write_buf;
>  	this->read_buf = ams_delta_read_buf;
> @@ -207,7 +195,7 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_rdy)) {
>  		err = PTR_ERR(priv->gpiod_rdy);
>  		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	if (priv->gpiod_rdy)
> @@ -225,66 +213,60 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_nwp)) {
>  		err = PTR_ERR(priv->gpiod_nwp);
>  		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nce)) {
>  		err = PTR_ERR(priv->gpiod_nce);
>  		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nre)) {
>  		err = PTR_ERR(priv->gpiod_nre);
>  		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nwe)) {
>  		err = PTR_ERR(priv->gpiod_nwe);
>  		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_ale)) {
>  		err = PTR_ERR(priv->gpiod_ale);
>  		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_cle)) {
>  		err = PTR_ERR(priv->gpiod_cle);
>  		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  	/* Request array of data pins, initialize them as input */
> -	data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> -	if (IS_ERR(data_gpiods)) {
> -		err = PTR_ERR(data_gpiods);
> +	priv->data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> +	if (IS_ERR(priv->data_gpiods)) {
> +		err = PTR_ERR(priv->data_gpiods);
>  		dev_err(&pdev->dev, "data GPIO request failed: %d\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	/* Scan to find existence of the device */
>  	err = nand_scan(mtd, 1);
>  	if (err)
> -		goto out_mtd;
> +		return err;
>  
>  	/* Register the partitions */
>  	mtd_device_register(mtd, partition_info, ARRAY_SIZE(partition_info));
>  
> -	goto out;
> -
> - out_mtd:
> -	iounmap(io_base);
> -out_free:
> - out:
> -	return err;
> +	return 0;
>  }
>  
>  /*
> @@ -294,13 +276,10 @@ static int ams_delta_cleanup(struct platform_device *pdev)
>  {
>  	struct ams_delta_nand *priv = platform_get_drvdata(pdev);
>  	struct mtd_info *mtd = nand_to_mtd(&priv->nand_chip);
> -	void __iomem *io_base = priv->io_base;
>  
> -	/* Release resources, unregister device */
> +	/* Unregister device */
>  	nand_release(mtd);
>  
> -	iounmap(io_base);
> -
>  	return 0;
>  }
>  
> 


-- 
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: marek.vasut@gmail.com (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write
Date: Tue, 7 Aug 2018 01:57:14 +0200	[thread overview]
Message-ID: <f4ebe9bf-8ca8-9ad2-3e48-697266b6962b@gmail.com> (raw)
In-Reply-To: <20180806222918.12644-6-jmkrzyszt@gmail.com>

On 08/07/2018 12:29 AM, Janusz Krzysztofik wrote:
> Don't readw()/writew() data directly from/to GPIO port which is under
> control of gpio-omap driver, use GPIO API instead.
> 
> Degrade of performance on Amstrad Delta is completely not acceptable.

I'd expect that changing from direct PIO to access through GPIO API
would degrade the performance. Maybe I misunderstood something ?

> The driver should work with any 8+-bit bidirectional GPIO port, not
> only OMAP.
> 
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
> ---
>  drivers/mtd/nand/raw/ams-delta.c | 97 ++++++++++++++++------------------------
>  1 file changed, 38 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
> index 09d6901fc94d..78996ddf82e0 100644
> --- a/drivers/mtd/nand/raw/ams-delta.c
> +++ b/drivers/mtd/nand/raw/ams-delta.c
> @@ -24,13 +24,10 @@
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/rawnand.h>
>  #include <linux/mtd/partitions.h>
> -#include <linux/platform_data/gpio-omap.h>
> +#include <linux/platform_device.h>
>  
> -#include <asm/io.h>
>  #include <asm/sizes.h>
>  
> -#include <mach/hardware.h>
> -
>  /*
>   * MTD structure for E3 (Delta)
>   */
> @@ -44,7 +41,7 @@ struct ams_delta_nand {
>  	struct gpio_desc	*gpiod_nwe;
>  	struct gpio_desc	*gpiod_ale;
>  	struct gpio_desc	*gpiod_cle;
> -	void __iomem		*io_base;
> +	struct gpio_descs	*data_gpiods;
>  };
>  
>  /*
> @@ -76,10 +73,14 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  {
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = byte;
> +	int i;
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_output_raw(data_gpiods->desc[i],
> +					   test_bit(i, &bits));
>  
> -	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
> -	writew(byte, this->IO_ADDR_W);
>  	gpiod_set_value(priv->gpiod_nwe, 0);
>  	ndelay(40);
>  	gpiod_set_value(priv->gpiod_nwe, 1);
> @@ -87,18 +88,28 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
>  
>  static u_char ams_delta_read_byte(struct mtd_info *mtd)
>  {
> -	u_char res;
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct ams_delta_nand *priv = nand_get_controller_data(this);
> -	void __iomem *io_base = priv->io_base;
> +	struct gpio_descs *data_gpiods = priv->data_gpiods;
> +	unsigned long bits = 0;
> +	int i, value_array[data_gpiods->ndescs];
> +
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		gpiod_direction_input(data_gpiods->desc[i]);
>  
>  	gpiod_set_value(priv->gpiod_nre, 0);
>  	ndelay(40);
> -	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
> -	res = readw(this->IO_ADDR_R);
> +
> +	gpiod_get_raw_array_value(data_gpiods->ndescs, data_gpiods->desc,
> +				  value_array);
> +
>  	gpiod_set_value(priv->gpiod_nre, 1);
>  
> -	return res;
> +	for (i = 0; i < data_gpiods->ndescs; i++)
> +		if (value_array[i])
> +			__set_bit(i, &bits);
> +
> +	return bits;
>  }
>  
>  static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
> @@ -159,14 +170,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	struct ams_delta_nand *priv;
>  	struct nand_chip *this;
>  	struct mtd_info *mtd;
> -	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	void __iomem *io_base;
> -	struct gpio_descs *data_gpiods;
>  	int err = 0;
>  
> -	if (!res)
> -		return -ENXIO;
> -
>  	/* Allocate memory for MTD device structure and private data */
>  	priv = devm_kzalloc(&pdev->dev, sizeof(struct ams_delta_nand),
>  			    GFP_KERNEL);
> @@ -179,25 +184,8 @@ static int ams_delta_init(struct platform_device *pdev)
>  	mtd = nand_to_mtd(this);
>  	mtd->dev.parent = &pdev->dev;
>  
> -	/*
> -	 * Don't try to request the memory region from here,
> -	 * it should have been already requested from the
> -	 * gpio-omap driver and requesting it again would fail.
> -	 */
> -
> -	io_base = ioremap(res->start, resource_size(res));
> -	if (io_base == NULL) {
> -		dev_err(&pdev->dev, "ioremap failed\n");
> -		err = -EIO;
> -		goto out_free;
> -	}
> -
> -	priv->io_base = io_base;
>  	nand_set_controller_data(this, priv);
>  
> -	/* Set address of NAND IO lines */
> -	this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH;
> -	this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT;
>  	this->read_byte = ams_delta_read_byte;
>  	this->write_buf = ams_delta_write_buf;
>  	this->read_buf = ams_delta_read_buf;
> @@ -207,7 +195,7 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_rdy)) {
>  		err = PTR_ERR(priv->gpiod_rdy);
>  		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	if (priv->gpiod_rdy)
> @@ -225,66 +213,60 @@ static int ams_delta_init(struct platform_device *pdev)
>  	if (IS_ERR(priv->gpiod_nwp)) {
>  		err = PTR_ERR(priv->gpiod_nwp);
>  		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nce)) {
>  		err = PTR_ERR(priv->gpiod_nce);
>  		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nre)) {
>  		err = PTR_ERR(priv->gpiod_nre);
>  		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
>  	if (IS_ERR(priv->gpiod_nwe)) {
>  		err = PTR_ERR(priv->gpiod_nwe);
>  		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_ale)) {
>  		err = PTR_ERR(priv->gpiod_ale);
>  		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	priv->gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->gpiod_cle)) {
>  		err = PTR_ERR(priv->gpiod_cle);
>  		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  	/* Request array of data pins, initialize them as input */
> -	data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> -	if (IS_ERR(data_gpiods)) {
> -		err = PTR_ERR(data_gpiods);
> +	priv->data_gpiods = devm_gpiod_get_array(&pdev->dev, "data", GPIOD_IN);
> +	if (IS_ERR(priv->data_gpiods)) {
> +		err = PTR_ERR(priv->data_gpiods);
>  		dev_err(&pdev->dev, "data GPIO request failed: %d\n", err);
> -		goto out_mtd;
> +		return err;
>  	}
>  
>  	/* Scan to find existence of the device */
>  	err = nand_scan(mtd, 1);
>  	if (err)
> -		goto out_mtd;
> +		return err;
>  
>  	/* Register the partitions */
>  	mtd_device_register(mtd, partition_info, ARRAY_SIZE(partition_info));
>  
> -	goto out;
> -
> - out_mtd:
> -	iounmap(io_base);
> -out_free:
> - out:
> -	return err;
> +	return 0;
>  }
>  
>  /*
> @@ -294,13 +276,10 @@ static int ams_delta_cleanup(struct platform_device *pdev)
>  {
>  	struct ams_delta_nand *priv = platform_get_drvdata(pdev);
>  	struct mtd_info *mtd = nand_to_mtd(&priv->nand_chip);
> -	void __iomem *io_base = priv->io_base;
>  
> -	/* Release resources, unregister device */
> +	/* Unregister device */
>  	nand_release(mtd);
>  
> -	iounmap(io_base);
> -
>  	return 0;
>  }
>  
> 


-- 
Best regards,
Marek Vasut

  reply	other threads:[~2018-08-06 23:57 UTC|newest]

Thread overview: 477+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-18 23:57 [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors for data I/O Janusz Krzysztofik
2018-07-18 23:57 ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 1/8] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:17   ` Boris Brezillon
2018-07-19  6:17     ` Boris Brezillon
2018-07-20 17:57     ` Janusz Krzysztofik
2018-07-20 17:57       ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 2/8] mtd: rawnand: ams-delta: Write protect device during probe Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:22   ` Boris Brezillon
2018-07-19  6:22     ` Boris Brezillon
2018-07-20 18:02     ` Janusz Krzysztofik
2018-07-20 18:02       ` Janusz Krzysztofik
2018-07-18 23:57 ` [RFC PATCH 3/8] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:23   ` Boris Brezillon
2018-07-19  6:23     ` Boris Brezillon
2018-07-20 18:12     ` Janusz Krzysztofik
2018-07-20 18:12       ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-20 19:29         ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 4/8] mtd: rawnand: ams-delta: Optimize pointer resolution on read/write Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:25   ` Boris Brezillon
2018-07-19  6:25     ` Boris Brezillon
2018-07-20 18:14     ` Janusz Krzysztofik
2018-07-20 18:14       ` Janusz Krzysztofik
2018-07-20 19:29       ` Boris Brezillon
2018-07-20 19:29         ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 5/8] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:28   ` Boris Brezillon
2018-07-19  6:28     ` Boris Brezillon
2018-07-18 23:57 ` [RFC PATCH 6/8] gpio: omap: Add get/set_multiple() callbacks Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-29 20:29   ` Linus Walleij
2018-07-29 20:29     ` Linus Walleij
2018-08-03  1:52     ` Grygorii Strashko
2018-08-03  1:52       ` Grygorii Strashko
2018-08-03  1:52       ` Grygorii Strashko
2018-08-03 16:47   ` Linus Walleij
2018-08-03 16:47     ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 7/8] mtd: rawnand: ams-delta: Check sanity of data GPIO resource Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:44   ` Boris Brezillon
2018-07-19  6:44     ` Boris Brezillon
2018-07-29 20:36     ` Linus Walleij
2018-07-29 20:36       ` Linus Walleij
2018-07-29 21:16       ` Boris Brezillon
2018-07-29 21:16         ` Boris Brezillon
2018-07-29 20:33   ` Linus Walleij
2018-07-29 20:33     ` Linus Walleij
2018-07-18 23:57 ` [RFC PATCH 8/8] mtd: rawnand: ams-delta: Use GPIO callbacks for data I/O Janusz Krzysztofik
2018-07-18 23:57   ` Janusz Krzysztofik
2018-07-19  6:47   ` Boris Brezillon
2018-07-19  6:47     ` Boris Brezillon
2018-07-20 18:38     ` Janusz Krzysztofik
2018-07-20 18:38       ` Janusz Krzysztofik
2018-07-20 19:48       ` Boris Brezillon
2018-07-20 19:48         ` Boris Brezillon
2018-07-19  6:15 ` [RFC PATCH 0/8] mtd: rawnand: ams-delta: Use gpio-omap accessors " Boris Brezillon
2018-07-19  6:15   ` Boris Brezillon
2018-07-20 17:55   ` Janusz Krzysztofik
2018-07-20 17:55     ` Janusz Krzysztofik
2018-07-20 19:25     ` Boris Brezillon
2018-07-20 19:25       ` Boris Brezillon
2018-10-03 12:00   ` [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op() Janusz Krzysztofik
2018-10-03 12:30     ` Boris Brezillon
2018-10-03 13:55       ` Janusz Krzysztofik
2018-10-03 14:06         ` Boris Brezillon
2018-10-04 13:52           ` Janusz Krzysztofik
2018-10-04 13:59             ` Boris Brezillon
2018-10-04 14:11               ` Janusz Krzysztofik
2018-10-04 14:22                 ` Boris Brezillon
2018-10-12 20:41     ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Janusz Krzysztofik
2018-10-12 20:41       ` [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op() Janusz Krzysztofik
2018-10-13  6:05         ` Boris Brezillon
2018-10-13  5:55       ` [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin Boris Brezillon
2018-10-15 19:41       ` [PATCH v3 1/3] " Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W Janusz Krzysztofik
2018-10-15 19:41         ` [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op() Janusz Krzysztofik
2018-11-11 20:53         ` [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin Miquel Raynal
2018-08-06 22:29 ` [RFC PATCH v2] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-06 22:29   ` Janusz Krzysztofik
2018-08-06 22:29   ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 01/12] mtd: rawnand: ams-delta: Assign mtd->dev.parent, not mtd->owner Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 23:54     ` Marek Vasut
2018-08-06 23:54       ` Marek Vasut
2018-08-06 23:54       ` Marek Vasut
2018-08-07 21:55       ` Janusz Krzysztofik
2018-08-07 21:55         ` Janusz Krzysztofik
2018-08-07 21:55         ` Janusz Krzysztofik
2018-08-07 16:57     ` Boris Brezillon
2018-08-07 16:57       ` Boris Brezillon
2018-08-07 16:57       ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 02/12] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-07 16:59       ` Boris Brezillon
2018-08-07 16:59       ` Boris Brezillon
2018-08-06 22:29   ` [RFC PATCH v2 03/12] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-07 16:59     ` Boris Brezillon
2018-08-07 16:59       ` Boris Brezillon
2018-08-07 16:59       ` Boris Brezillon
2018-08-10 10:10     ` Linus Walleij
2018-08-10 10:10       ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 04/12] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-07 17:00     ` Boris Brezillon
2018-08-07 17:00       ` Boris Brezillon
2018-08-07 17:00       ` Boris Brezillon
2018-08-10 10:11     ` Linus Walleij
2018-08-10 10:11       ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 05/12] mtd: rawnand: ams-delta: use GPIO API for data read/write Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 23:57     ` Marek Vasut [this message]
2018-08-06 23:57       ` Marek Vasut
2018-08-06 23:57       ` Marek Vasut
2018-08-07 17:06     ` Boris Brezillon
2018-08-07 17:06       ` Boris Brezillon
2018-08-07 17:06       ` Boris Brezillon
2018-08-07 17:11       ` Janusz Krzysztofik
2018-08-07 17:11         ` Janusz Krzysztofik
2018-08-07 17:11         ` Janusz Krzysztofik
2018-08-10 10:25     ` Linus Walleij
2018-08-10 10:25       ` Linus Walleij
2018-08-06 22:29   ` [RFC PATCH v2 06/12] ARM: OMAP1: ams-delta: drop obsolete NAND resources Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 07/12] mtd: rawnand: ams-delta: Set port direction once per transfer Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-07 18:57     ` Boris Brezillon
2018-08-07 18:57       ` Boris Brezillon
2018-08-07 18:57       ` Boris Brezillon
2018-08-07 18:57       ` Boris Brezillon
2018-08-08 16:55       ` Janusz Krzysztofik
2018-08-08 16:55         ` Janusz Krzysztofik
2018-08-08 16:55         ` Janusz Krzysztofik
2018-08-08 17:42         ` Miquel Raynal
2018-08-08 17:42           ` Miquel Raynal
2018-08-08 17:42           ` Miquel Raynal
2018-08-06 22:29   ` [RFC PATCH v2 08/12] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-07 17:02     ` Boris Brezillon
2018-08-07 17:02       ` Boris Brezillon
2018-08-07 17:02       ` Boris Brezillon
2018-08-07 17:15       ` Janusz Krzysztofik
2018-08-07 17:15         ` Janusz Krzysztofik
2018-08-07 17:15         ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 09/12] gpiolib: Identify GPIO descriptor arrays with direct mapping Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 23:29     ` Linus Walleij
2018-08-06 23:29       ` Linus Walleij
2018-08-06 23:29       ` Linus Walleij
2018-08-07 16:50       ` Janusz Krzysztofik
2018-08-07 16:50         ` Janusz Krzysztofik
2018-08-07 16:50         ` Janusz Krzysztofik
2018-08-07 17:10         ` Boris Brezillon
2018-08-07 17:10           ` Boris Brezillon
2018-08-07 17:10           ` Boris Brezillon
2018-08-07 17:14     ` Boris Brezillon
2018-08-07 17:14       ` Boris Brezillon
2018-08-07 17:14       ` Boris Brezillon
2018-08-07 17:19       ` Janusz Krzysztofik
2018-08-07 17:19         ` Janusz Krzysztofik
2018-08-07 17:19         ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 10/12] gpiolib: Introduce bitmap get/set array API extension Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 11/12] mtd: rawnand: ams-delta: Use GPIO API bitmap extension Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29   ` [RFC PATCH v2 12/12] gpiolib: Add fast processing path to bitmap API functions Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 22:29     ` Janusz Krzysztofik
2018-08-06 23:43     ` Linus Walleij
2018-08-06 23:43       ` Linus Walleij
2018-08-06 23:43       ` Linus Walleij
2018-08-07 17:29       ` Janusz Krzysztofik
2018-08-07 17:29         ` Janusz Krzysztofik
2018-08-07 17:29         ` Janusz Krzysztofik
2018-08-07 17:47         ` Boris Brezillon
2018-08-07 17:47           ` Boris Brezillon
2018-08-07 17:47           ` Boris Brezillon
2018-08-10 10:55           ` Linus Walleij
2018-08-10 10:55             ` Linus Walleij
2018-08-13 22:34   ` [PATCH v3 0/7] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34     ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 1/7] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 2/7] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 3/7] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 4/7] mtd: rawnand: ams-delta: request data port GPIO resource Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 5/7] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-16  7:30       ` Boris Brezillon
2018-08-16  7:30         ` Boris Brezillon
2018-08-13 22:34     ` [PATCH v3 6/7] mtd: rawnand: ams-delta: Simplify pointer resolution on read/write Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-13 22:34     ` [PATCH v3 7/7] mtd: rawnand: ams-delta: use GPIO API for data I/O Janusz Krzysztofik
2018-08-13 22:34       ` Janusz Krzysztofik
2018-08-16  7:39       ` Boris Brezillon
2018-08-16  7:39         ` Boris Brezillon
2018-08-20 21:39     ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-08-20 21:39       ` [PATCH v4 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-08-24 12:57         ` Boris Brezillon
2018-09-05  6:47       ` [PATCH v4 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-09-05 20:53         ` Janusz Krzysztofik
2018-09-07 16:45           ` Tony Lindgren
2018-09-19  8:46             ` Miquel Raynal
2018-09-19 22:52       ` [PATCH v5 " Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 1/3] mtd: rawnand: ams-delta: show parent device in sysfs Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 2/3] mtd: rawnand: ams-delta: Use private structure Janusz Krzysztofik
2018-09-19 22:52         ` [PATCH v5 3/3] mtd: rawnand: ams-delta: Set port direction when needed Janusz Krzysztofik
2018-09-23 11:35         ` [PATCH v5 0/3] mtd: rawnand: ams-delta: Cleanups and optimizations Miquel Raynal
2018-08-20 23:43     ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-20 23:43       ` Janusz Krzysztofik
2018-08-20 23:43       ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-21  6:49         ` Peter Rosin
2018-08-21  6:49           ` Peter Rosin
2018-08-21  6:52           ` Peter Rosin
2018-08-21  6:52             ` Peter Rosin
2018-08-29 12:03         ` Miguel Ojeda
2018-08-29 12:03           ` Miguel Ojeda
2018-08-29 12:03           ` Miguel Ojeda
2018-08-29 18:01           ` Janusz Krzysztofik
2018-08-29 18:01             ` Janusz Krzysztofik
2018-08-29 18:01             ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-20 23:43       ` [RFC RFT PATCH v4 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-20 23:43         ` Janusz Krzysztofik
2018-08-29  9:06       ` [RFC RFT PATCH 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-08-29  9:06         ` Linus Walleij
2018-08-29  9:06         ` Linus Walleij
2018-08-29 18:16         ` Janusz Krzysztofik
2018-08-29 18:16           ` Janusz Krzysztofik
2018-08-29 18:16           ` Janusz Krzysztofik
2018-08-29 10:19       ` Ulf Hansson
2018-08-29 10:19         ` Ulf Hansson
2018-08-29 20:48       ` [PATH v5 " Janusz Krzysztofik
2018-08-29 20:48         ` Janusz Krzysztofik
2018-08-29 20:48         ` Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-30  4:30           ` Peter Rosin
2018-08-30  4:30             ` Peter Rosin
2018-08-30  7:40           ` Geert Uytterhoeven
2018-08-30  7:40             ` Geert Uytterhoeven
2018-08-30  7:40             ` Geert Uytterhoeven
2018-08-30 11:10           ` Miguel Ojeda
2018-08-30 11:10             ` Miguel Ojeda
2018-08-30 11:10             ` Miguel Ojeda
2018-08-30 15:35             ` David Laight
2018-08-30 15:35               ` David Laight
2018-08-30 15:35               ` David Laight
2018-09-02 10:19             ` Janusz Krzysztofik
2018-09-02 10:19               ` Janusz Krzysztofik
2018-09-02 10:19               ` Janusz Krzysztofik
2018-08-31  9:14           ` Linus Walleij
2018-08-31  9:14             ` Linus Walleij
2018-08-29 20:48         ` [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-29 20:48         ` [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-29 20:48           ` Janusz Krzysztofik
2018-08-29 20:49         ` [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-29 20:49           ` Janusz Krzysztofik
2018-08-29 20:49           ` Janusz Krzysztofik
2018-08-31 22:56         ` [PATH v6 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-08-31 22:56           ` Janusz Krzysztofik
2018-08-31 22:56           ` Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-09-01  0:23             ` Peter Rosin
2018-09-01  0:23               ` Peter Rosin
2018-09-04 15:28             ` kbuild test robot
2018-09-04 15:28               ` kbuild test robot
2018-09-04 15:28               ` kbuild test robot
2018-09-04 15:28             ` kbuild test robot
2018-09-04 15:28               ` kbuild test robot
2018-09-04 15:28               ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-08-31 22:56           ` [PATCH v6 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-09-04 15:27             ` kbuild test robot
2018-09-04 15:27               ` kbuild test robot
2018-09-04 15:27               ` kbuild test robot
2018-08-31 22:56           ` [PATCH v6 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-08-31 22:56             ` Janusz Krzysztofik
2018-09-02 12:01           ` [PATCH v7 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-02 12:01             ` Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-02 12:01               ` Janusz Krzysztofik
2018-09-02 13:21               ` Lukas Wunner
2018-09-02 13:21                 ` Lukas Wunner
2018-09-02 13:21                 ` Lukas Wunner
2018-09-03  4:31               ` Matthew Wilcox
2018-09-03  4:31                 ` Matthew Wilcox
2018-09-03  4:31                 ` Matthew Wilcox
2018-09-03 14:24                 ` Geert Uytterhoeven
2018-09-03 14:24                   ` Geert Uytterhoeven
2018-09-03 14:24                   ` Geert Uytterhoeven
2018-09-03 15:07               ` Geert Uytterhoeven
2018-09-03 15:07                 ` Geert Uytterhoeven
2018-09-03 15:07                 ` Geert Uytterhoeven
2018-09-04 15:29               ` kbuild test robot
2018-09-04 15:29                 ` kbuild test robot
2018-09-04 15:29                 ` kbuild test robot
2018-09-05  6:46               ` kbuild test robot
2018-09-05  6:46                 ` kbuild test robot
2018-09-05  6:46                 ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-02 12:01               ` Janusz Krzysztofik
2018-09-02 12:01               ` Janusz Krzysztofik
2018-09-02 12:01             ` [PATCH v7 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-02 12:01               ` Janusz Krzysztofik
2018-09-03 14:21               ` Geert Uytterhoeven
2018-09-03 14:21                 ` Geert Uytterhoeven
2018-09-03 14:21                 ` Geert Uytterhoeven
2018-09-04 15:23               ` kbuild test robot
2018-09-04 15:23                 ` kbuild test robot
2018-09-04 15:23                 ` kbuild test robot
2018-09-05  7:11               ` kbuild test robot
2018-09-05  7:11                 ` kbuild test robot
2018-09-05  7:11                 ` kbuild test robot
2018-09-02 12:01             ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-02 12:01               ` Janusz Krzysztofik
     [not found]               ` <CGME20180920101151eucas1p221f5a1715b8556bb9d99bf08fe09ce6f@eucas1p2.samsung.com>
2018-09-20 10:11                 ` Marek Szyprowski
2018-09-20 10:11                   ` Marek Szyprowski
2018-09-20 10:11                   ` Marek Szyprowski
2018-09-20 15:48                   ` Janusz Krzysztofik
2018-09-20 15:48                     ` Janusz Krzysztofik
2018-09-20 15:48                     ` Janusz Krzysztofik
2018-09-20 15:48                     ` Janusz Krzysztofik
2018-09-20 16:21                     ` Janusz Krzysztofik
2018-09-20 16:21                       ` Janusz Krzysztofik
2018-09-20 16:21                       ` Janusz Krzysztofik
2018-09-21  8:18                       ` Marek Szyprowski
2018-09-21  8:18                         ` Marek Szyprowski
2018-09-21 10:51                         ` Janusz Krzysztofik
2018-09-21 10:51                           ` Janusz Krzysztofik
2018-09-21 11:26                           ` Janusz Krzysztofik
2018-09-21 11:26                             ` Janusz Krzysztofik
2018-09-21 11:26                             ` Janusz Krzysztofik
2018-09-21 14:14                           ` Marek Szyprowski
2018-09-21 14:14                             ` Marek Szyprowski
2018-09-21 14:14                             ` Marek Szyprowski
2018-09-23 10:43                             ` Janusz Krzysztofik
2018-09-23 10:43                               ` Janusz Krzysztofik
2018-09-23 23:53                               ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Janusz Krzysztofik
2018-09-23 23:53                                 ` Janusz Krzysztofik
2018-09-23 23:53                                 ` [PATCH 1/2] gpiolib: Fix missing updates of bitmap index Janusz Krzysztofik
2018-09-23 23:53                                   ` Janusz Krzysztofik
2018-09-23 23:53                                   ` Janusz Krzysztofik
2018-09-24  8:11                                   ` Linus Walleij
2018-09-24  8:11                                     ` Linus Walleij
2018-09-24  8:11                                     ` Linus Walleij
2018-09-29 12:20                                   ` [PATCH] gpiolib: Fix incorrect use of find_next_zero_bit() Janusz Krzysztofik
2018-09-29 12:20                                     ` Janusz Krzysztofik
2018-10-01  6:46                                     ` Marek Szyprowski
2018-10-01  6:46                                       ` Marek Szyprowski
2018-10-01  9:37                                     ` Linus Walleij
2018-10-01  9:37                                       ` Linus Walleij
2018-10-01  9:37                                       ` Linus Walleij
2018-09-23 23:53                                 ` [PATCH 2/2] gpiolib: Fix array members of same chip processed separately Janusz Krzysztofik
2018-09-23 23:53                                   ` Janusz Krzysztofik
2018-09-23 23:53                                   ` Janusz Krzysztofik
2018-09-24  8:13                                   ` Linus Walleij
2018-09-24  8:13                                     ` Linus Walleij
2018-09-24  8:13                                     ` Linus Walleij
2018-09-24  9:43                                 ` [PATCH 0/2] gpiolib: Fix issues introduced by fast bitmap processing path Marek Szyprowski
2018-09-24  9:43                                   ` Marek Szyprowski
2018-09-24  9:43                                   ` Marek Szyprowski
2018-09-24 11:08                                   ` Janusz Krzysztofik
2018-09-24 11:08                                     ` Janusz Krzysztofik
2018-09-24 11:38                                     ` Marek Szyprowski
2018-09-24 11:38                                       ` Marek Szyprowski
2018-09-24 11:38                                       ` Marek Szyprowski
2018-09-24 14:18                                       ` Janusz Krzysztofik
2018-09-24 14:18                                         ` Janusz Krzysztofik
2018-09-24 14:18                                         ` Janusz Krzysztofik
2018-09-25 19:24                                         ` [PATCH] mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap Janusz Krzysztofik
2018-09-26  7:50                                           ` Linus Walleij
2018-09-26  8:14                                           ` Marek Szyprowski
     [not found]                                           ` <7a4906d9-ffb1-f2af-07e7-d5815dcd0d8c@samsung.com>
2018-09-26  8:27                                             ` Marek Szyprowski
2018-10-12 19:09                                           ` [RFT PATCH] " Janusz Krzysztofik
2018-10-12 19:09                                             ` Janusz Krzysztofik
2018-10-12 19:09                                             ` Janusz Krzysztofik
2018-10-12 19:09                                             ` Janusz Krzysztofik
2018-10-15  8:32                                             ` Marek Szyprowski
2018-10-15  8:32                                               ` Marek Szyprowski
2018-10-15  8:32                                               ` Marek Szyprowski
2018-10-15  8:32                                               ` Marek Szyprowski
2018-10-15 10:29                                             ` Ulf Hansson
2018-10-15 10:29                                               ` Ulf Hansson
2018-10-15 10:29                                               ` Ulf Hansson
2018-10-15 10:29                                               ` Ulf Hansson
2018-10-15 14:27                                             ` Linus Walleij
2018-10-15 14:27                                               ` Linus Walleij
2018-10-15 14:27                                               ` Linus Walleij
2018-10-15 14:27                                               ` Linus Walleij
2018-09-20 18:05                     ` [PATCH v7 4/4] gpiolib: Implement fast processing path in get/set array Dan Carpenter
2018-09-20 18:05                       ` Dan Carpenter
2018-09-20 15:49                   ` Linus Walleij
2018-09-20 15:49                     ` Linus Walleij
2018-09-20 15:49                     ` Linus Walleij
2018-09-05 21:50             ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Janusz Krzysztofik
2018-09-05 21:50               ` Janusz Krzysztofik
2018-09-05 21:50               ` Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set array Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 2/4] gpiolib: Identify arrays matching GPIO hardware Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 3/4] gpiolib: Pass array info to get/set array functions Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-05 21:50               ` [PATCH v8 4/4] gpiolib: Implement fast processing path in get/set array Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-05 21:50                 ` Janusz Krzysztofik
2018-09-13  9:22               ` [PATCH v8 0/4] gpiolib: speed up GPIO array processing Linus Walleij
2018-09-13  9:22                 ` Linus Walleij
2018-09-13  9:22                 ` Linus Walleij
2018-09-19 18:08                 ` Linus Walleij
2018-09-19 18:08                   ` Linus Walleij
2018-09-19 18:08                   ` Linus Walleij
2018-11-21 11:08     ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08       ` Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 1/4] ARM: OMAP1: ams-delta: Provide GPIO lookup table for NAND data port Janusz Krzysztofik
2018-11-21 11:08         ` Janusz Krzysztofik
2018-11-23 17:02         ` Tony Lindgren
2018-11-23 17:02           ` Tony Lindgren
2018-11-21 11:08       ` [PATCH v4 2/4] mtd: rawnand: ams-delta: Request data port GPIO resource Janusz Krzysztofik
2018-11-21 11:08         ` Janusz Krzysztofik
2018-11-21 11:08       ` [PATCH v4 3/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Janusz Krzysztofik
2018-11-21 11:08         ` Janusz Krzysztofik
2018-11-21 14:53         ` Boris Brezillon
2018-11-21 14:53           ` Boris Brezillon
2018-11-21 11:08       ` [PATCH v4 4/4] ARM: OMAP1: ams-delta: Drop obsolete NAND resources Janusz Krzysztofik
2018-11-21 11:08         ` Janusz Krzysztofik
2018-11-21 14:56       ` Subject: [PATCH v4 0/4] mtd: rawnand: ams-delta: Use GPIO API for data I/O Boris Brezillon
2018-11-21 14:56         ` Boris Brezillon
2018-11-23 17:03         ` Tony Lindgren
2018-11-23 17:03           ` Tony Lindgren
2018-12-07  8:04           ` Miquel Raynal
2018-12-07  8:04             ` Miquel Raynal
2018-12-07 16:10             ` Tony Lindgren
2018-12-07 16:10               ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f4ebe9bf-8ca8-9ad2-3e48-697266b6962b@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=jmkrzyszt@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.