[PATCH v2 0/3] Add can support to RZ/G2M

[PATCH v2 0/3] Add can support to RZ/G2M

[Fabrizio Castro]

Dear All,

this series contains all that's necessary to add CAN support
for RZ/G2M (a.k.a. r8a774a1).

v1-v2:
* applied Geert's comments

Thanks,
Fab

Chris Paterson (1):
  arm64: dts: renesas: r8a774a1: Add CAN nodes

Fabrizio Castro (2):
  can: rcar_can: Fix erroneous registration
  dt-bindings: can: rcar_can: Add r8a774a1 support

 .../devicetree/bindings/net/can/rcar_can.txt       | 18 +++++++++++-----
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi          | 24 ++++++++++++++++++++++
 drivers/net/can/rcar/rcar_can.c                    |  5 ++++-
 3 files changed, 41 insertions(+), 6 deletions(-)

-- 
2.7.4

[PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration

[Fabrizio Castro]

Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.

Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
---

v1->v2:
* dropped id specific data as per Geert's comments

This patch applies on top of linux-can-next-for-4.19-20180727.

 drivers/net/can/rcar/rcar_can.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 11662f4..771a460 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -24,6 +24,9 @@
 
 #define RCAR_CAN_DRV_NAME	"rcar_can"
 
+#define RCAR_SUPPORTED_CLOCKS	(BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
+				 BIT(CLKR_CLKEXT))
+
 /* Mailbox configuration:
  * mailbox 60 - 63 - Rx FIFO mailboxes
  * mailbox 56 - 59 - Tx FIFO mailboxes
@@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev)
 		goto fail_clk;
 	}
 
-	if (clock_select >= ARRAY_SIZE(clock_names)) {
+	if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
 		err = -EINVAL;
 		dev_err(&pdev->dev, "invalid CAN clock selected\n");
 		goto fail_clk;
-- 
2.7.4

Re: [PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration

[Simon Horman]

On Mon, Sep 10, 2018 at 11:43:13AM +0100, Fabrizio Castro wrote:
> Assigning 2 to "renesas,can-clock-select" tricks the driver into
> registering the CAN interface, even though we don't want that.
> This patch improves one of the checks to prevent that from happening.
> 
> Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

RE: [PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration

[Fabrizio Castro]

Dear All,

Is this patch ok?

Thanks,
Fab

> From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Sent: 10 September 2018 11:43
> Subject: [PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration
>
> Assigning 2 to "renesas,can-clock-select" tricks the driver into
> registering the CAN interface, even though we don't want that.
> This patch improves one of the checks to prevent that from happening.
>
> Fixes: 862e2b6af9413b43 ("can: rcar_can: support all input clocks")
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> ---
>
> v1->v2:
> * dropped id specific data as per Geert's comments
>
> This patch applies on top of linux-can-next-for-4.19-20180727.
>
>  drivers/net/can/rcar/rcar_can.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
> index 11662f4..771a460 100644
> --- a/drivers/net/can/rcar/rcar_can.c
> +++ b/drivers/net/can/rcar/rcar_can.c
> @@ -24,6 +24,9 @@
>
>  #define RCAR_CAN_DRV_NAME"rcar_can"
>
> +#define RCAR_SUPPORTED_CLOCKS(BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
> + BIT(CLKR_CLKEXT))
> +
>  /* Mailbox configuration:
>   * mailbox 60 - 63 - Rx FIFO mailboxes
>   * mailbox 56 - 59 - Tx FIFO mailboxes
> @@ -789,7 +792,7 @@ static int rcar_can_probe(struct platform_device *pdev)
>  goto fail_clk;
>  }
>
> -if (clock_select >= ARRAY_SIZE(clock_names)) {
> +if (!(BIT(clock_select) & RCAR_SUPPORTED_CLOCKS)) {
>  err = -EINVAL;
>  dev_err(&pdev->dev, "invalid CAN clock selected\n");
>  goto fail_clk;
> --
> 2.7.4




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH v2 1/3][can-next] can: rcar_can: Fix erroneous registration

[Simon Horman]

On Thu, Nov 08, 2018 at 12:39:00PM +0000, Fabrizio Castro wrote:
> Dear All,
> 
> Is this patch ok?

It looks ok to me.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

[PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Fabrizio Castro]

Document RZ/G2M (r8a774a1) SoC specific bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
v1->v2:
* dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
  as per Geert's comments.

This patch applies on top of next-20180910.

 Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 94a7f33..f3b160c 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
 Required properties:
 - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
 	      "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
+	      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
 	      "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
 	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
 	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -16,15 +17,21 @@ Required properties:
 	      "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
 	      "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
 	      compatible device.
-	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
+	      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first
 	      followed by the generic version.
 
 - reg: physical base address and size of the R-Car CAN register map.
 - interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 3 CAN clock inputs.
-- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
+	  devices.
+	  phandles and clock specifiers for 3 CAN clock inputs for every other
+	  SoC.
+- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
+	       3 clock input name strings for every other SoC: "clkp1", "clkp2",
+	       "can_clk".
 - pinctrl-0: pin control group to be used for this controller.
 - pinctrl-names: must be "default".
 
@@ -41,8 +48,9 @@ using the below properties:
 Optional properties:
 - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
 			    <0x0> (default) : Peripheral clock (clkp1)
-			    <0x1> : Peripheral clock (clkp2)
-			    <0x3> : Externally input clock
+			    <0x1> : Peripheral clock (clkp2) (not supported by
+				    RZ/G2 devices)
+			    <0x3> : External input clock
 
 Example
 -------
-- 
2.7.4

Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Simon Horman]

On Mon, Sep 10, 2018 at 11:43:14AM +0100, Fabrizio Castro wrote:
> Document RZ/G2M (r8a774a1) SoC specific bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> v1->v2:
> * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
>   as per Geert's comments.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Rob Herring]

On Mon, Sep 10, 2018 at 11:43:14AM +0100, Fabrizio Castro wrote:
> Document RZ/G2M (r8a774a1) SoC specific bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> v1->v2:
> * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
>   as per Geert's comments.
> 
> This patch applies on top of next-20180910.
> 
>  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Fabrizio Castro]

Dear All,

Who is the best person to take this patch?

Thanks,
Fab

> From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Sent: 10 September 2018 11:43
> Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
>
> Document RZ/G2M (r8a774a1) SoC specific bindings.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> v1->v2:
> * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
>   as per Geert's comments.
>
> This patch applies on top of next-20180910.
>
>  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> index 94a7f33..f3b160c 100644
> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
>  Required properties:
>  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
>        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
>        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
>        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
>        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> @@ -16,15 +17,21 @@ Required properties:
>        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
>        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
>        compatible device.
> -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> +      compatible device.
>        When compatible with the generic version, nodes must list the
>        SoC-specific version corresponding to the platform first
>        followed by the generic version.
>
>  - reg: physical base address and size of the R-Car CAN register map.
>  - interrupts: interrupt specifier for the sole interrupt.
> -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> +  devices.
> +  phandles and clock specifiers for 3 CAN clock inputs for every other
> +  SoC.
> +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> +       "can_clk".
>  - pinctrl-0: pin control group to be used for this controller.
>  - pinctrl-names: must be "default".
>
> @@ -41,8 +48,9 @@ using the below properties:
>  Optional properties:
>  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
>      <0x0> (default) : Peripheral clock (clkp1)
> -    <0x1> : Peripheral clock (clkp2)
> -    <0x3> : Externally input clock
> +    <0x1> : Peripheral clock (clkp2) (not supported by
> +    RZ/G2 devices)
> +    <0x3> : External input clock
>
>  Example
>  -------
> --
> 2.7.4




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Fabrizio Castro]

Dear All,

Who is the best person to take this patch?

Thanks,
Fab

> From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Sent: 10 September 2018 11:43
> Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
>
> Document RZ/G2M (r8a774a1) SoC specific bindings.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> v1->v2:
> * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
>   as per Geert's comments.
>
> This patch applies on top of next-20180910.
>
>  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
>  1 file changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> index 94a7f33..f3b160c 100644
> --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
>  Required properties:
>  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
>        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
>        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
>        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
>        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> @@ -16,15 +17,21 @@ Required properties:
>        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
>        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
>        compatible device.
> -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> +      compatible device.
>        When compatible with the generic version, nodes must list the
>        SoC-specific version corresponding to the platform first
>        followed by the generic version.
>
>  - reg: physical base address and size of the R-Car CAN register map.
>  - interrupts: interrupt specifier for the sole interrupt.
> -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> +  devices.
> +  phandles and clock specifiers for 3 CAN clock inputs for every other
> +  SoC.
> +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> +       "can_clk".
>  - pinctrl-0: pin control group to be used for this controller.
>  - pinctrl-names: must be "default".
>
> @@ -41,8 +48,9 @@ using the below properties:
>  Optional properties:
>  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
>      <0x0> (default) : Peripheral clock (clkp1)
> -    <0x1> : Peripheral clock (clkp2)
> -    <0x3> : Externally input clock
> +    <0x1> : Peripheral clock (clkp2) (not supported by
> +    RZ/G2 devices)
> +    <0x3> : External input clock
>
>  Example
>  -------
> --
> 2.7.4




Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Simon Horman]

On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote:
> Dear All,
> 
> Who is the best person to take this patch?

I believe this one is for Marc.

> Thanks,
> Fab
> 
> > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Sent: 10 September 2018 11:43
> > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
> >
> > Document RZ/G2M (r8a774a1) SoC specific bindings.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > v1->v2:
> > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
> >   as per Geert's comments.
> >
> > This patch applies on top of next-20180910.
> >
> >  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
> >  1 file changed, 13 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > index 94a7f33..f3b160c 100644
> > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> >  Required properties:
> >  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> >        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> >        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> >        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> >        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > @@ -16,15 +17,21 @@ Required properties:
> >        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
> >        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> >        compatible device.
> > -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> > +      compatible device.
> >        When compatible with the generic version, nodes must list the
> >        SoC-specific version corresponding to the platform first
> >        followed by the generic version.
> >
> >  - reg: physical base address and size of the R-Car CAN register map.
> >  - interrupts: interrupt specifier for the sole interrupt.
> > -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> > +  devices.
> > +  phandles and clock specifiers for 3 CAN clock inputs for every other
> > +  SoC.
> > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > +       "can_clk".
> >  - pinctrl-0: pin control group to be used for this controller.
> >  - pinctrl-names: must be "default".
> >
> > @@ -41,8 +48,9 @@ using the below properties:
> >  Optional properties:
> >  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> >      <0x0> (default) : Peripheral clock (clkp1)
> > -    <0x1> : Peripheral clock (clkp2)
> > -    <0x3> : Externally input clock
> > +    <0x1> : Peripheral clock (clkp2) (not supported by
> > +    RZ/G2 devices)
> > +    <0x3> : External input clock
> >
> >  Example
> >  -------
> > --
> > 2.7.4
> 
> 
> 
> 
> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
> 

Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Simon Horman]

On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote:
> Dear All,
> 
> Who is the best person to take this patch?

I believe this one is for Marc.

> Thanks,
> Fab
> 
> > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Sent: 10 September 2018 11:43
> > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
> >
> > Document RZ/G2M (r8a774a1) SoC specific bindings.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> > v1->v2:
> > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
> >   as per Geert's comments.
> >
> > This patch applies on top of next-20180910.
> >
> >  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
> >  1 file changed, 13 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > index 94a7f33..f3b160c 100644
> > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> >  Required properties:
> >  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> >        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> >        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> >        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> >        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > @@ -16,15 +17,21 @@ Required properties:
> >        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
> >        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> >        compatible device.
> > -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> > +      compatible device.
> >        When compatible with the generic version, nodes must list the
> >        SoC-specific version corresponding to the platform first
> >        followed by the generic version.
> >
> >  - reg: physical base address and size of the R-Car CAN register map.
> >  - interrupts: interrupt specifier for the sole interrupt.
> > -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> > +  devices.
> > +  phandles and clock specifiers for 3 CAN clock inputs for every other
> > +  SoC.
> > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > +       "can_clk".
> >  - pinctrl-0: pin control group to be used for this controller.
> >  - pinctrl-names: must be "default".
> >
> > @@ -41,8 +48,9 @@ using the below properties:
> >  Optional properties:
> >  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> >      <0x0> (default) : Peripheral clock (clkp1)
> > -    <0x1> : Peripheral clock (clkp2)
> > -    <0x3> : Externally input clock
> > +    <0x1> : Peripheral clock (clkp2) (not supported by
> > +    RZ/G2 devices)
> > +    <0x3> : External input clock
> >
> >  Example
> >  -------
> > --
> > 2.7.4
> 
> 
> 
> 
> Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
> 

RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Fabrizio Castro]

Thank you Simon for getting back to me.

Marc, does this patch look ok to you?

Thanks,
Fab

> Subject: Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
>
> On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote:
> > Dear All,
> >
> > Who is the best person to take this patch?
>
> I believe this one is for Marc.
>
> > Thanks,
> > Fab
> >
> > > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > > Sent: 10 September 2018 11:43
> > > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
> > >
> > > Document RZ/G2M (r8a774a1) SoC specific bindings.
> > >
> > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > > v1->v2:
> > > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
> > >   as per Geert's comments.
> > >
> > > This patch applies on top of next-20180910.
> > >
> > >  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
> > >  1 file changed, 13 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > index 94a7f33..f3b160c 100644
> > > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> > >  Required properties:
> > >  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> > >        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > > +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> > >        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> > >        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> > >        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > > @@ -16,15 +17,21 @@ Required properties:
> > >        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
> > >        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> > >        compatible device.
> > > -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > > +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> > > +      compatible device.
> > >        When compatible with the generic version, nodes must list the
> > >        SoC-specific version corresponding to the platform first
> > >        followed by the generic version.
> > >
> > >  - reg: physical base address and size of the R-Car CAN register map.
> > >  - interrupts: interrupt specifier for the sole interrupt.
> > > -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> > > +  devices.
> > > +  phandles and clock specifiers for 3 CAN clock inputs for every other
> > > +  SoC.
> > > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > > +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > > +       "can_clk".
> > >  - pinctrl-0: pin control group to be used for this controller.
> > >  - pinctrl-names: must be "default".
> > >
> > > @@ -41,8 +48,9 @@ using the below properties:
> > >  Optional properties:
> > >  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> > >      <0x0> (default) : Peripheral clock (clkp1)
> > > -    <0x1> : Peripheral clock (clkp2)
> > > -    <0x3> : Externally input clock
> > > +    <0x1> : Peripheral clock (clkp2) (not supported by
> > > +    RZ/G2 devices)
> > > +    <0x3> : External input clock
> > >
> > >  Example
> > >  -------
> > > --
> > > 2.7.4
> >
> >
> >
> >
> > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England
> & Wales under Registered No. 04586709.
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support

[Fabrizio Castro]

Thank you Simon for getting back to me.

Marc, does this patch look ok to you?

Thanks,
Fab

> Subject: Re: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
>
> On Thu, Nov 08, 2018 at 11:25:23AM +0000, Fabrizio Castro wrote:
> > Dear All,
> >
> > Who is the best person to take this patch?
>
> I believe this one is for Marc.
>
> > Thanks,
> > Fab
> >
> > > From: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > > Sent: 10 September 2018 11:43
> > > Subject: [PATCH v2 2/3] dt-bindings: can: rcar_can: Add r8a774a1 support
> > >
> > > Document RZ/G2M (r8a774a1) SoC specific bindings.
> > >
> > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > > Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > > v1->v2:
> > > * dropped "renesas,rzg-gen2-can" and fixed "clocks" property description
> > >   as per Geert's comments.
> > >
> > > This patch applies on top of next-20180910.
> > >
> > >  Documentation/devicetree/bindings/net/can/rcar_can.txt | 18 +++++++++++++-----
> > >  1 file changed, 13 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > index 94a7f33..f3b160c 100644
> > > --- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > +++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
> > > @@ -4,6 +4,7 @@ Renesas R-Car CAN controller Device Tree Bindings
> > >  Required properties:
> > >  - compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
> > >        "renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
> > > +      "renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
> > >        "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
> > >        "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
> > >        "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
> > > @@ -16,15 +17,21 @@ Required properties:
> > >        "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
> > >        "renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
> > >        compatible device.
> > > -      "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
> > > +      "renesas,rcar-gen3-can" for a generic R-Car Gen3 or RZ/G2
> > > +      compatible device.
> > >        When compatible with the generic version, nodes must list the
> > >        SoC-specific version corresponding to the platform first
> > >        followed by the generic version.
> > >
> > >  - reg: physical base address and size of the R-Car CAN register map.
> > >  - interrupts: interrupt specifier for the sole interrupt.
> > > -- clocks: phandles and clock specifiers for 3 CAN clock inputs.
> > > -- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
> > > +- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
> > > +  devices.
> > > +  phandles and clock specifiers for 3 CAN clock inputs for every other
> > > +  SoC.
> > > +- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
> > > +       3 clock input name strings for every other SoC: "clkp1", "clkp2",
> > > +       "can_clk".
> > >  - pinctrl-0: pin control group to be used for this controller.
> > >  - pinctrl-names: must be "default".
> > >
> > > @@ -41,8 +48,9 @@ using the below properties:
> > >  Optional properties:
> > >  - renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
> > >      <0x0> (default) : Peripheral clock (clkp1)
> > > -    <0x1> : Peripheral clock (clkp2)
> > > -    <0x3> : Externally input clock
> > > +    <0x1> : Peripheral clock (clkp2) (not supported by
> > > +    RZ/G2 devices)
> > > +    <0x3> : External input clock
> > >
> > >  Example
> > >  -------
> > > --
> > > 2.7.4
> >
> >
> >
> >
> > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England
> & Wales under Registered No. 04586709.
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

From: Chris Paterson <chris.paterson2@renesas.com>

Add the device nodes for both RZ/G2M CAN channels.

Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

v1->v2:
* replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
  Geert's comment.

This patch applies on top of renesas-devel-20180906-v4.19-rc2.

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 046fc93..867e875 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -874,6 +874,30 @@
 			status = "disabled";
 		};
 
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
 		pwm0: pwm@e6e30000 {
 			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
 			reg = <0 0xe6e30000 0 0x8>;
-- 
2.7.4

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

From: Chris Paterson <chris.paterson2@renesas.com>

Add the device nodes for both RZ/G2M CAN channels.

Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

v1->v2:
* replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
  Geert's comment.

This patch applies on top of renesas-devel-20180906-v4.19-rc2.

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 046fc93..867e875 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -874,6 +874,30 @@
 			status = "disabled";
 		};
 
+		can0: can at e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can at e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
 		pwm0: pwm at e6e30000 {
 			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
 			reg = <0 0xe6e30000 0 0x8>;
-- 
2.7.4

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

From: Chris Paterson <chris.paterson2@renesas.com>

Add the device nodes for both RZ/G2M CAN channels.

Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---

v1->v2:
* replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
  Geert's comment.

This patch applies on top of renesas-devel-20180906-v4.19-rc2.

 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 046fc93..867e875 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -874,6 +874,30 @@
 			status = "disabled";
 		};
 
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774a1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+			clock-names = "clkp1", "can_clk";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
 		pwm0: pwm@e6e30000 {
 			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
 			reg = <0 0xe6e30000 0 0x8>;
-- 
2.7.4

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can@e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can@e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm@e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can at e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can at e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm at e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> From: Chris Paterson <chris.paterson2@renesas.com>
> 
> Add the device nodes for both RZ/G2M CAN channels.
> 
> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
> 
> v1->v2:
> * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
>   Geert's comment.
> 
> This patch applies on top of renesas-devel-20180906-v4.19-rc2.

Thanks Fabrizio,

I would like to waif for the bindings to be accepted before accepting this
patch.

> 
>  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> index 046fc93..867e875 100644
> --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> @@ -874,6 +874,30 @@
>  			status = "disabled";
>  		};
>  
> +		can0: can@e6c30000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c30000 0 0x1000>;
> +			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 916>;
> +			status = "disabled";
> +		};
> +
> +		can1: can@e6c38000 {
> +			compatible = "renesas,can-r8a774a1",
> +				     "renesas,rcar-gen3-can";
> +			reg = <0 0xe6c38000 0 0x1000>;
> +			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> +			clock-names = "clkp1", "can_clk";
> +			power-domains = <&sysc 32>;
> +			resets = <&cpg 915>;
> +			status = "disabled";
> +		};
> +
>  		pwm0: pwm@e6e30000 {
>  			compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
>  			reg = <0 0xe6e30000 0 0x8>;
> -- 
> 2.7.4
> 

RE: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

Hello Simon,

> Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
>
> On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > From: Chris Paterson <chris.paterson2@renesas.com>
> >
> > Add the device nodes for both RZ/G2M CAN channels.
> >
> > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >
> > v1->v2:
> > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> >   Geert's comment.
> >
> > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
>
> Thanks Fabrizio,
>
> I would like to waif for the bindings to be accepted before accepting this
> patch.

Marc has taken the bindings, I guess we can unblock this patch now?

Thanks,
Fab

>
> >
> >  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > index 046fc93..867e875 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > @@ -874,6 +874,30 @@
> >  status = "disabled";
> >  };
> >
> > +can0: can@e6c30000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c30000 0 0x1000>;
> > +interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 916>;
> > +status = "disabled";
> > +};
> > +
> > +can1: can@e6c38000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c38000 0 0x1000>;
> > +interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 915>;
> > +status = "disabled";
> > +};
> > +
> >  pwm0: pwm@e6e30000 {
> >  compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
> >  reg = <0 0xe6e30000 0 0x8>;
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

Hello Simon,

> Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
>
> On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > From: Chris Paterson <chris.paterson2@renesas.com>
> >
> > Add the device nodes for both RZ/G2M CAN channels.
> >
> > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >
> > v1->v2:
> > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> >   Geert's comment.
> >
> > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
>
> Thanks Fabrizio,
>
> I would like to waif for the bindings to be accepted before accepting this
> patch.

Marc has taken the bindings, I guess we can unblock this patch now?

Thanks,
Fab

>
> >
> >  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > index 046fc93..867e875 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > @@ -874,6 +874,30 @@
> >  status = "disabled";
> >  };
> >
> > +can0: can at e6c30000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c30000 0 0x1000>;
> > +interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 916>;
> > +status = "disabled";
> > +};
> > +
> > +can1: can at e6c38000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c38000 0 0x1000>;
> > +interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 915>;
> > +status = "disabled";
> > +};
> > +
> >  pwm0: pwm at e6e30000 {
> >  compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
> >  reg = <0 0xe6e30000 0 0x8>;
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

RE: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Fabrizio Castro]

Hello Simon,

> Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
>
> On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > From: Chris Paterson <chris.paterson2@renesas.com>
> >
> > Add the device nodes for both RZ/G2M CAN channels.
> >
> > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > ---
> >
> > v1->v2:
> > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> >   Geert's comment.
> >
> > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
>
> Thanks Fabrizio,
>
> I would like to waif for the bindings to be accepted before accepting this
> patch.

Marc has taken the bindings, I guess we can unblock this patch now?

Thanks,
Fab

>
> >
> >  arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > index 046fc93..867e875 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
> > @@ -874,6 +874,30 @@
> >  status = "disabled";
> >  };
> >
> > +can0: can@e6c30000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c30000 0 0x1000>;
> > +interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 916>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 916>;
> > +status = "disabled";
> > +};
> > +
> > +can1: can@e6c38000 {
> > +compatible = "renesas,can-r8a774a1",
> > +     "renesas,rcar-gen3-can";
> > +reg = <0 0xe6c38000 0 0x1000>;
> > +interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
> > +clocks = <&cpg CPG_MOD 915>, <&can_clk>;
> > +clock-names = "clkp1", "can_clk";
> > +power-domains = <&sysc 32>;
> > +resets = <&cpg 915>;
> > +status = "disabled";
> > +};
> > +
> >  pwm0: pwm@e6e30000 {
> >  compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
> >  reg = <0 0xe6e30000 0 0x8>;
> > --
> > 2.7.4
> >



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Thanks, applied for v4.21.

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Thanks, applied for v4.21.

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Thanks, applied for v4.21.

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Sorry for letting this slip.

Yes, applied for v4.21.

[PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Sorry for letting this slip.

Yes, applied for v4.21.

Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes

[Simon Horman]

On Thu, Sep 27, 2018 at 10:53:41AM +0000, Fabrizio Castro wrote:
> Hello Simon,
> 
> > Subject: Re: [PATCH v2 3/3] arm64: dts: renesas: r8a774a1: Add CAN nodes
> >
> > On Mon, Sep 10, 2018 at 11:43:15AM +0100, Fabrizio Castro wrote:
> > > From: Chris Paterson <chris.paterson2@renesas.com>
> > >
> > > Add the device nodes for both RZ/G2M CAN channels.
> > >
> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com>
> > > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> > > ---
> > >
> > > v1->v2:
> > > * replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
> > >   Geert's comment.
> > >
> > > This patch applies on top of renesas-devel-20180906-v4.19-rc2.
> >
> > Thanks Fabrizio,
> >
> > I would like to waif for the bindings to be accepted before accepting this
> > patch.
> 
> Marc has taken the bindings, I guess we can unblock this patch now?

Sorry for letting this slip.

Yes, applied for v4.21.

Re: [PATCH v2 0/3] Add can support to RZ/G2M

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 532 bytes --]

On 09/10/2018 12:43 PM, Fabrizio Castro wrote:
> Dear All,
> 
> this series contains all that's necessary to add CAN support
> for RZ/G2M (a.k.a. r8a774a1).
> 
> v1-v2:
> * applied Geert's comments

Added 1/3 and 2/3 to linux-can.

Tnx.
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]