From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: devicetree@vger.kernel.org, "Dave Gerlach" <d-gerlach@ti.com>, Keerthy <j-keerthy@ti.com>, "Tero Kristo" <t-kristo@ti.com>, "Benoît Cousson" <bcousson@baylibre.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Date: Mon, 24 Sep 2018 17:05:41 -0700 [thread overview] Message-ID: <20180925000545.22931-1-tony@atomide.com> (raw) Hi all, Here are four patches to make am437x and am335x l4 devices to probe with ti-sysc driver similar to what we've already done for omap4. The related legacy hwmod platform data will be removed few merge cycles later. There are still dependencies to Tero's clkctrl changes and for ti-sysc drivers changes. So these patches are based on on v4.19-rc3 merged with my omap-for-v4.20/dt branch plus the following additional series of patches: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries [PATCH 0/3] ARM: dts: am3/am4/dra7 clkctrl data conversion [PATCH 0/4] TI sysc driver updates for am335x and am437x v4.19-rc3 is needed for commit 18eb8aea7fb2 ("net: ethernet: cpsw-phy-sel: prefer phandle for phy sel") and omap-for-v4.20/dt is needed to avoid conflicts with clean-up. I've also pushed out a temporary testing branch for people to test as omap-for-v4.20/dt-ti-sysc-tmp-testing [0][1]. Regards, Tony [0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v4.20/dt-ti-sysc-tmp-testing [1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.20/dt-ti-sysc-tmp-testing Tony Lindgren (4): ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc arch/arm/boot/dts/am335x-shc.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2132 +++++++++++++++++++++++++ arch/arm/boot/dts/am33xx.dtsi | 623 +------- arch/arm/boot/dts/am4372.dtsi | 876 +---------- arch/arm/boot/dts/am437x-l4.dtsi | 2499 ++++++++++++++++++++++++++++++ 5 files changed, 4651 insertions(+), 1481 deletions(-) create mode 100644 arch/arm/boot/dts/am33xx-l4.dtsi create mode 100644 arch/arm/boot/dts/am437x-l4.dtsi -- 2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Date: Mon, 24 Sep 2018 17:05:41 -0700 [thread overview] Message-ID: <20180925000545.22931-1-tony@atomide.com> (raw) Hi all, Here are four patches to make am437x and am335x l4 devices to probe with ti-sysc driver similar to what we've already done for omap4. The related legacy hwmod platform data will be removed few merge cycles later. There are still dependencies to Tero's clkctrl changes and for ti-sysc drivers changes. So these patches are based on on v4.19-rc3 merged with my omap-for-v4.20/dt branch plus the following additional series of patches: [PATCH 00/11] clk: ti: clkctrl data split based on clkdm boundaries [PATCH 0/3] ARM: dts: am3/am4/dra7 clkctrl data conversion [PATCH 0/4] TI sysc driver updates for am335x and am437x v4.19-rc3 is needed for commit 18eb8aea7fb2 ("net: ethernet: cpsw-phy-sel: prefer phandle for phy sel") and omap-for-v4.20/dt is needed to avoid conflicts with clean-up. I've also pushed out a temporary testing branch for people to test as omap-for-v4.20/dt-ti-sysc-tmp-testing [0][1]. Regards, Tony [0] git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git omap-for-v4.20/dt-ti-sysc-tmp-testing [1] https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git/log/?h=omap-for-v4.20/dt-ti-sysc-tmp-testing Tony Lindgren (4): ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc arch/arm/boot/dts/am335x-shc.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2132 +++++++++++++++++++++++++ arch/arm/boot/dts/am33xx.dtsi | 623 +------- arch/arm/boot/dts/am4372.dtsi | 876 +---------- arch/arm/boot/dts/am437x-l4.dtsi | 2499 ++++++++++++++++++++++++++++++ 5 files changed, 4651 insertions(+), 1481 deletions(-) create mode 100644 arch/arm/boot/dts/am33xx-l4.dtsi create mode 100644 arch/arm/boot/dts/am437x-l4.dtsi -- 2.19.0
next reply other threads:[~2018-09-25 0:05 UTC|newest] Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-25 0:05 Tony Lindgren [this message] 2018-09-25 0:05 ` [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc Tony Lindgren 2018-09-25 0:05 ` [PATCH 1/4] ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren 2018-09-25 0:05 ` Tony Lindgren 2018-09-25 0:05 ` [PATCH 2/4] ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc Tony Lindgren 2018-09-25 0:05 ` Tony Lindgren 2018-12-04 12:23 ` Peter Ujfalusi 2018-12-04 12:23 ` Peter Ujfalusi 2018-12-04 18:11 ` Tony Lindgren 2018-12-04 18:11 ` Tony Lindgren 2018-12-04 23:18 ` Tony Lindgren 2018-12-04 23:18 ` Tony Lindgren 2018-12-05 6:14 ` Peter Ujfalusi 2018-12-05 19:00 ` Tony Lindgren 2018-12-05 19:00 ` Tony Lindgren 2018-12-05 23:02 ` Tony Lindgren 2018-12-05 23:02 ` Tony Lindgren 2018-12-07 12:46 ` Peter Ujfalusi 2018-09-25 0:05 ` [PATCH 3/4] ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data Tony Lindgren 2018-09-25 0:05 ` Tony Lindgren 2018-09-27 14:56 ` Tony Lindgren 2018-09-27 14:56 ` Tony Lindgren 2018-09-25 0:05 ` [PATCH 4/4] ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc Tony Lindgren 2018-09-25 0:05 ` Tony Lindgren 2018-11-27 13:03 ` Peter Ujfalusi 2018-11-27 13:03 ` Peter Ujfalusi 2018-11-27 16:16 ` Tony Lindgren 2018-11-27 16:16 ` Tony Lindgren 2018-11-28 12:52 ` Peter Ujfalusi 2018-11-28 12:52 ` Peter Ujfalusi 2018-11-29 19:07 ` Tony Lindgren 2018-11-29 19:07 ` Tony Lindgren 2018-09-25 5:14 ` [PATCH 0/4] Update am437x and am335x dts to probe " Keerthy 2018-09-25 5:14 ` Keerthy 2018-09-25 14:40 ` Tony Lindgren 2018-09-25 14:40 ` Tony Lindgren 2018-09-25 17:55 ` Tony Lindgren 2018-09-25 17:55 ` Tony Lindgren 2018-09-25 21:16 ` Grygorii Strashko 2018-09-25 21:16 ` Grygorii Strashko 2018-09-26 4:08 ` Keerthy 2018-09-26 4:08 ` Keerthy 2018-09-26 15:59 ` Tony Lindgren 2018-09-26 15:59 ` Tony Lindgren 2018-09-26 16:23 ` Tony Lindgren 2018-09-26 16:23 ` Tony Lindgren 2018-09-26 21:36 ` Grygorii Strashko 2018-09-26 21:36 ` Grygorii Strashko 2018-09-26 23:31 ` Tony Lindgren 2018-09-26 23:31 ` Tony Lindgren 2018-09-27 4:55 ` Keerthy 2018-09-27 4:55 ` Keerthy 2018-09-27 14:53 ` Tony Lindgren 2018-09-27 14:53 ` Tony Lindgren 2018-09-27 21:43 ` Tony Lindgren 2018-09-27 21:43 ` Tony Lindgren 2018-10-01 16:32 ` Tony Lindgren 2018-10-01 16:32 ` Tony Lindgren 2018-10-04 4:29 ` Keerthy 2018-10-04 4:29 ` Keerthy 2018-10-04 14:23 ` Tony Lindgren 2018-10-04 14:23 ` Tony Lindgren 2018-09-27 19:11 ` Grygorii Strashko 2018-09-27 19:11 ` Grygorii Strashko 2018-09-27 19:38 ` Tony Lindgren 2018-09-27 19:38 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180925000545.22931-1-tony@atomide.com \ --to=tony@atomide.com \ --cc=bcousson@baylibre.com \ --cc=d-gerlach@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=j-keerthy@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.