From: Dan Murphy <dmurphy@ti.com> To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, lee.jones@linaro.org, linux-omap@vger.kernel.org, linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [RFC PATCH v2 8/9] dt-bindings: leds: Add the LM3632 LED dt binding Date: Fri, 28 Sep 2018 13:29:53 -0500 [thread overview] Message-ID: <20180928182954.25446-9-dmurphy@ti.com> (raw) In-Reply-To: <20180928182954.25446-1-dmurphy@ti.com> Add the TI LM3632 LED binding. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/leds/leds-lm3632.txt | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3632.txt diff --git a/Documentation/devicetree/bindings/leds/leds-lm3632.txt b/Documentation/devicetree/bindings/leds/leds-lm3632.txt new file mode 100644 index 000000000000..1befd17174ac --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3632.txt @@ -0,0 +1,53 @@ +* Texas Instruments - lm3632 Single-Chip Backlight and 1.5-A Flash LED Driver + +The LM3632A integrates LED drivers for both +the backlight of the LCD panel and the camera flash +along with the bias power for the LCD panel into one +device. + +Required properties: + - compatible : Can be one of the following + "ti,lm3632" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Required child properties: + - reg : 0 - Indicates a backlight mode + 1 - Indicates a Torch/Strobe (white LED) mode + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt + - flash-max-microamp : Range from 100mA - 1.5A + - flash-max-timeout-us : Range from 32ms - 1024ms + - led-max-microamp : Range from 25mA - 375mA + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@11 { + compatible = "ti,lm3632"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + led@0 { + reg = <0>; + label = "white:backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + label = "white:torch"; + led-max-microamp = <375000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1000000>; + }; +} + +For more product information please see the links below: +http://www.ti.com/product/LM3632 -- 2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <lee.jones@linaro.org>, <linux-omap@vger.kernel.org>, <linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [RFC PATCH v2 8/9] dt-bindings: leds: Add the LM3632 LED dt binding Date: Fri, 28 Sep 2018 13:29:53 -0500 [thread overview] Message-ID: <20180928182954.25446-9-dmurphy@ti.com> (raw) In-Reply-To: <20180928182954.25446-1-dmurphy@ti.com> Add the TI LM3632 LED binding. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/leds/leds-lm3632.txt | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3632.txt diff --git a/Documentation/devicetree/bindings/leds/leds-lm3632.txt b/Documentation/devicetree/bindings/leds/leds-lm3632.txt new file mode 100644 index 000000000000..1befd17174ac --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lm3632.txt @@ -0,0 +1,53 @@ +* Texas Instruments - lm3632 Single-Chip Backlight and 1.5-A Flash LED Driver + +The LM3632A integrates LED drivers for both +the backlight of the LCD panel and the camera flash +along with the bias power for the LCD panel into one +device. + +Required properties: + - compatible : Can be one of the following + "ti,lm3632" + - reg : I2C slave address + - #address-cells : 1 + - #size-cells : 0 + +Required child properties: + - reg : 0 - Indicates a backlight mode + 1 - Indicates a Torch/Strobe (white LED) mode + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt + - flash-max-microamp : Range from 100mA - 1.5A + - flash-max-timeout-us : Range from 32ms - 1024ms + - led-max-microamp : Range from 25mA - 375mA + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : + see Documentation/devicetree/bindings/leds/common.txt + +Example: +led-controller@11 { + compatible = "ti,lm3632"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + + led@0 { + reg = <0>; + label = "white:backlight"; + linux,default-trigger = "backlight"; + }; + + led@1 { + reg = <1>; + label = "white:torch"; + led-max-microamp = <375000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1000000>; + }; +} + +For more product information please see the links below: +http://www.ti.com/product/LM3632 -- 2.19.0
next prev parent reply other threads:[~2018-09-28 18:29 UTC|newest] Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-09-28 18:29 [RFC PATCH v2 0/9] TI LMU and Dedicated Drivers Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 1/9] leds: add TI LMU backlight driver Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-10-02 7:56 ` Pavel Machek 2018-10-02 12:32 ` Dan Murphy 2018-10-02 12:32 ` Dan Murphy 2018-10-02 18:52 ` Jacek Anaszewski 2018-10-02 22:07 ` Pavel Machek 2018-10-03 12:00 ` Dan Murphy 2018-10-03 12:00 ` Dan Murphy 2018-10-03 12:10 ` Dan Murphy 2018-10-03 12:10 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 2/9] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-10-02 7:28 ` Pavel Machek 2018-10-03 12:24 ` Dan Murphy 2018-10-03 12:24 ` Dan Murphy 2018-10-03 13:01 ` Pavel Machek 2018-10-03 20:46 ` Jacek Anaszewski 2018-10-03 20:46 ` Jacek Anaszewski 2018-10-04 13:26 ` Dan Murphy 2018-10-04 13:26 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 4/9] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 5/9] leds: lm3697: Introduce the " Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 6/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 7/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy 2018-09-28 18:29 ` Dan Murphy 2018-09-28 18:29 ` Dan Murphy [this message] 2018-09-28 18:29 ` [RFC PATCH v2 8/9] dt-bindings: leds: Add the LM3632 LED dt binding Dan Murphy 2018-09-28 18:29 ` [RFC PATCH v2 9/9] leds: lm3632: Introduce the TI LM3632 driver Dan Murphy 2018-09-28 18:29 ` Dan Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180928182954.25446-9-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=jacek.anaszewski@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.