[U-Boot] [PATCH 11/53] armv8: ls1043aqds: Add TFABOOT defconfig

From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/53] armv8: ls1043aqds: Add TFABOOT defconfig
Date: Wed,  3 Oct 2018 17:06:54 +0530	[thread overview]
Message-ID: <20181003113736.14981-12-rajesh.bhagat@nxp.com> (raw)
In-Reply-To: <20181003113736.14981-1-rajesh.bhagat@nxp.com>

This defconfig is for TFABOOT, to be loaded by trusted firmware.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 board/freescale/ls1043aqds/ddr.c        |  3 +-
 board/freescale/ls1043aqds/ls1043aqds.c | 15 ++++++-
 configs/ls1043aqds_ram_defconfig        | 54 +++++++++++++++++++++++++
 include/configs/ls1043aqds.h            |  3 +-
 4 files changed, 72 insertions(+), 3 deletions(-)
 create mode 100644 configs/ls1043aqds_ram_defconfig

diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index efc441a917..a79d8e2120 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -112,7 +112,8 @@ int fsl_initdram(void)
 {
 	phys_size_t dram_size;
 
-#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_TFABOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
 	gd->ram_size = fsl_ddr_sdram_size();
 
 	return 0;
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 4fba57242b..5247d9ac14 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -47,6 +47,9 @@ enum {
 
 int checkboard(void)
 {
+#ifdef CONFIG_TFABOOT
+	enum boot_src src = get_boot_src();
+#endif
 	char buf[64];
 #ifndef CONFIG_SD_BOOT
 	u8 sw;
@@ -54,6 +57,12 @@ int checkboard(void)
 
 	puts("Board: LS1043AQDS, boot from ");
 
+#ifdef CONFIG_TFABOOT
+	if (src == BOOT_SOURCE_SD_MMC)
+		puts("SD\n");
+	else {
+#endif
+
 #ifdef CONFIG_SD_BOOT
 	puts("SD\n");
 #else
@@ -72,6 +81,9 @@ int checkboard(void)
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 #endif
 
+#ifdef CONFIG_TFABOOT
+	}
+#endif
 	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
 	       QIXIS_READ(id), QIXIS_READ(arch));
 
@@ -155,7 +167,8 @@ int dram_init(void)
 	 */
 	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 	fsl_initdram();
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
+	defined(CONFIG_SPL_BUILD)
 	/* This will break-before-make MMU for DDR */
 	update_early_mmu_table();
 #endif
diff --git a/configs/ls1043aqds_ram_defconfig b/configs/ls1043aqds_ram_defconfig
new file mode 100644
index 0000000000..149a26ef33
--- /dev/null
+++ b/configs/ls1043aqds_ram_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043AQDS=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m at 0x100000(nor_bank0_uboot),40m at 0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m at 0x4100000(nor_bank4_uboot),40m at 0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m at 0x100000(nor_bank0_uboot),40m at 0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m at 0x4100000(nor_bank4_uboot),40m at 0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-qds-duart"
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 68f202f97a..31ef9941b6 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -349,7 +349,8 @@ unsigned long get_board_ddr_clk(void);
 #define VDD_MV_MAX			1212
 
 /* QSPI device */
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+	(defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI))
 #define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_SPANSION
-- 
2.17.1
