All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 49/53] armv8: fsl-layerscape: Update parsing boot source
Date: Wed,  3 Oct 2018 17:07:32 +0530	[thread overview]
Message-ID: <20181003113736.14981-50-rajesh.bhagat@nxp.com> (raw)
In-Reply-To: <20181003113736.14981-1-rajesh.bhagat@nxp.com>

From: York Sun <york.sun@nxp.com>

Workaround of erratum A010539 clears the RCW source field in PORSR1
register, causing failure of detecting boot source using this method.
Use SMC call if U-Boot runs at EL2. If SMC is not implemented or
running at EL3, continue to read PORSR1 and presume QSPI as boot
source if erratum workaround A010539 is enabled and RCW source is
cleared.

Signed-off-by: York Sun <york.sun@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/cpu.c       | 26 ++++++++++++++++---
 .../arm/include/asm/arch-fsl-layerscape/soc.h |  1 +
 2 files changed, 23 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index ca5329f25c..2e3494bee4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -693,23 +693,41 @@ enum boot_src __get_boot_src(u32 porsr1)
 		}
 	}
 #endif
+
+	if (CONFIG_IS_ENABLED(SYS_FSL_ERRATUM_A010539) && !rcw_src)
+		src = BOOT_SOURCE_QSPI_NOR;
+
 	debug("%s: src 0x%x\n", __func__, src);
 	return src;
 }
 
 enum boot_src get_boot_src(void)
 {
-	u32 porsr1;
+	struct pt_regs regs;
+	u32 porsr1 = 0;
 
 #if defined(CONFIG_FSL_LSCH3)
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
-
-	porsr1 = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
 #elif defined(CONFIG_FSL_LSCH2)
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+#endif
+
+	if (current_el() == 2) {
+		regs.regs[0] = SIP_SVC_RCW;
 
-	porsr1 = in_be32(&gur->porsr1);
+		smc_call(&regs);
+		if (!regs.regs[0])
+			porsr1 = regs.regs[1];
+	}
+
+	if (current_el() == 3 || !porsr1) {
+#ifdef CONFIG_FSL_LSCH3
+		porsr1 = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+#elif defined(CONFIG_FSL_LSCH2)
+		porsr1 = in_be32(&gur->porsr1);
 #endif
+	}
+
 	debug("%s: porsr1 0x%x\n", __func__, porsr1);
 
 	return __get_boot_src(porsr1);
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index ef228b6443..daa1c70b3a 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -56,6 +56,7 @@ struct cpu_type {
 
 #ifdef CONFIG_TFABOOT
 #define SMC_DRAM_BANK_INFO (0xC200FF12)
+#define SIP_SVC_RCW	0xC200FF18
 
 phys_size_t tfa_get_dram_size(void);
 
-- 
2.17.1

  parent reply	other threads:[~2018-10-03 11:37 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03 11:36 [U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 01/53] move data structure out of cpu.h Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 02/53] env: allow flash and nand env driver to compile together Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 03/53] env: sf: define API to override sf environment address Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 04/53] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 05/53] armv8: layerscape: add TFABOOT config option Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 06/53] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 16:12   ` York Sun
2018-10-04 11:29     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 08/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
2018-10-03 16:13   ` York Sun
2018-10-04 11:29     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 16:16   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 11/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 12/53] armv8: ls1043a: make environment address and size common Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
2018-10-03 16:17   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 14/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
2018-10-03 16:18   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 16/53] drivers: qe: " Rajesh Bhagat
2018-10-03 16:19   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 17/53] armv8: ls1046a: make FMAN address common Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE " Rajesh Bhagat
2018-10-03 16:21   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
2018-10-03 16:24   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 16:28   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 21/53] armv8: ls1043a: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 22/53] armv8: ls1012ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 23/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 24/53] armv8: ls1012a: update environment address for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 25/53] armv8: ls1012a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas " Rajesh Bhagat
2018-10-03 16:31   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 27/53] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 28/53] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
2018-10-03 16:33   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 30/53] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 31/53] armv8: ls1043ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 32/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 33/53] armv8: ls1046ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 34/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 35/53] armv8: ls1012ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 36/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 37/53] armv8: ls1012ardb: Make U-Boot EL2 safe Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 38/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 39/53] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 40/53] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 41/53] armv8: ls1012afrwy: correct environment offset Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 42/53] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 43/53] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 44/53] drivers: ifc: add support for for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 45/53] armv8: ls1046aqds: make IFC params common and dynamic Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 46/53] armv8: ls1043ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 47/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 48/53] armv8: ls1012a: fix ls1012aqds secure boot compilation Rajesh Bhagat
2018-10-03 11:37 ` Rajesh Bhagat [this message]
2018-10-03 11:37 ` [U-Boot] [PATCH 50/53] armv8: ls1043aqds: add i2c QIXIS support for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 51/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 52/53] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 53/53] armv8: skip setenv if gd->env_addr is not default env Rajesh Bhagat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003113736.14981-50-rajesh.bhagat@nxp.com \
    --to=rajesh.bhagat@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.