All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT
Date: Wed,  3 Oct 2018 17:07:09 +0530	[thread overview]
Message-ID: <20181003113736.14981-27-rajesh.bhagat@nxp.com> (raw)
In-Reply-To: <20181003113736.14981-1-rajesh.bhagat@nxp.com>

Removes EL3 specific erratas for TFABOOT, And now taken care in TFA.

ARM_ERRATA_855873, SYS_FSL_ERRATUM_A008850, SYS_FSL_ERRATUM_A008511,
SYS_FSL_ERRATUM_A008336, SYS_FSL_ERRATUM_A009663, SYS_FSL_ERRATUM_A009803
SYS_FSL_ERRATUM_A009942, SYS_FSL_ERRATUM_A010165

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 24 +++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 9092757d1f..1872c66dcd 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -1,7 +1,7 @@
 config ARCH_LS1012A
 	bool
 	select ARMV8_SET_SMPEN
-	select ARM_ERRATA_855873
+	select ARM_ERRATA_855873 if !TFABOOT
 	select FSL_LSCH2
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
@@ -22,22 +22,22 @@ config ARCH_LS1012A
 config ARCH_LS1043A
 	bool
 	select ARMV8_SET_SMPEN
-	select ARM_ERRATA_855873
+	select ARM_ERRATA_855873 if !TFABOOT
 	select FSL_LSCH2
 	select SYS_FSL_SRDS_1
 	select SYS_HAS_SERDES
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
-	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A008850 if !TFABOOT
 	select SYS_FSL_ERRATUM_A008997
 	select SYS_FSL_ERRATUM_A009007
 	select SYS_FSL_ERRATUM_A009008
-	select SYS_FSL_ERRATUM_A009660
-	select SYS_FSL_ERRATUM_A009663
+	select SYS_FSL_ERRATUM_A009660 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009663 if !TFABOOT
 	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009929
-	select SYS_FSL_ERRATUM_A009942
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
 	select SYS_FSL_ERRATUM_A010315
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR3
@@ -62,17 +62,17 @@ config ARCH_LS1046A
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
 	select SYS_FSL_DDR_VER_50
-	select SYS_FSL_ERRATUM_A008336
-	select SYS_FSL_ERRATUM_A008511
-	select SYS_FSL_ERRATUM_A008850
+	select SYS_FSL_ERRATUM_A008336 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008511 if !TFABOOT
+	select SYS_FSL_ERRATUM_A008850 if !TFABOOT
 	select SYS_FSL_ERRATUM_A008997
 	select SYS_FSL_ERRATUM_A009007
 	select SYS_FSL_ERRATUM_A009008
 	select SYS_FSL_ERRATUM_A009798
 	select SYS_FSL_ERRATUM_A009801
-	select SYS_FSL_ERRATUM_A009803
-	select SYS_FSL_ERRATUM_A009942
-	select SYS_FSL_ERRATUM_A010165
+	select SYS_FSL_ERRATUM_A009803 if !TFABOOT
+	select SYS_FSL_ERRATUM_A009942 if !TFABOOT
+	select SYS_FSL_ERRATUM_A010165 if !TFABOOT
 	select SYS_FSL_ERRATUM_A010539
 	select SYS_FSL_HAS_DDR4
 	select SYS_FSL_SRDS_2
-- 
2.17.1

  parent reply	other threads:[~2018-10-03 11:37 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03 11:36 [U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 01/53] move data structure out of cpu.h Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 02/53] env: allow flash and nand env driver to compile together Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 03/53] env: sf: define API to override sf environment address Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 04/53] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 05/53] armv8: layerscape: add TFABOOT config option Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 06/53] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 16:12   ` York Sun
2018-10-04 11:29     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 08/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
2018-10-03 16:13   ` York Sun
2018-10-04 11:29     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 16:16   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 11/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 12/53] armv8: ls1043a: make environment address and size common Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
2018-10-03 16:17   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 14/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
2018-10-03 16:18   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:36 ` [U-Boot] [PATCH 16/53] drivers: qe: " Rajesh Bhagat
2018-10-03 16:19   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 17/53] armv8: ls1046a: make FMAN address common Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE " Rajesh Bhagat
2018-10-03 16:21   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
2018-10-03 16:24   ` York Sun
2018-10-04 11:30     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 16:28   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 21/53] armv8: ls1043a: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 22/53] armv8: ls1012ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 23/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 24/53] armv8: ls1012a: update environment address for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 25/53] armv8: ls1012a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 11:37 ` Rajesh Bhagat [this message]
2018-10-03 16:31   ` [U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas " York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 27/53] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 28/53] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
2018-10-03 16:33   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 30/53] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 31/53] armv8: ls1043ardb: Add TFABOOT defconfig for secure boot Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 32/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 33/53] armv8: ls1046ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 34/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 35/53] armv8: ls1012ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 36/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 37/53] armv8: ls1012ardb: Make U-Boot EL2 safe Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 38/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 39/53] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 40/53] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 41/53] armv8: ls1012afrwy: correct environment offset Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 42/53] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 43/53] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 44/53] drivers: ifc: add support for for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 45/53] armv8: ls1046aqds: make IFC params common and dynamic Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 46/53] armv8: ls1043ardb: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 47/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 48/53] armv8: ls1012a: fix ls1012aqds secure boot compilation Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 49/53] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 50/53] armv8: ls1043aqds: add i2c QIXIS support for TFABOOT Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 51/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 52/53] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 53/53] armv8: skip setenv if gd->env_addr is not default env Rajesh Bhagat
  -- strict thread matches above, loose matches on Subject: below --
2018-10-03 10:44 [U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003113736.14981-27-rajesh.bhagat@nxp.com \
    --to=rajesh.bhagat@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.