From: Hannes Reinecke <hare@suse.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Christoph Hellwig <hch@lst.de>,
James Bottomley <james.bottomley@hansenpartnership.com>,
linux-scsi@vger.kernel.org, linux-block@vger.kernel.org,
Hannes Reinecke <hare@suse.de>, Hannes Reinecke <hare@suse.com>
Subject: [PATCH 3/3] drivers/block: Remove DAC960 driver
Date: Fri, 12 Oct 2018 09:15:48 +0200 [thread overview]
Message-ID: <20181012071548.129113-4-hare@suse.de> (raw)
In-Reply-To: <20181012071548.129113-1-hare@suse.de>
The DAC960 driver has been obsoleted by the myrb/myrs drivers,
so it can be dropped.
Signed-off-by: Hannes Reinecke <hare@suse.com>
---
Documentation/blockdev/README.DAC960 | 756 ----
drivers/block/DAC960.c | 7229 ----------------------------------
drivers/block/DAC960.h | 4414 ---------------------
drivers/block/Kconfig | 12 -
drivers/block/Makefile | 1 -
5 files changed, 12412 deletions(-)
delete mode 100644 Documentation/blockdev/README.DAC960
delete mode 100644 drivers/block/DAC960.c
delete mode 100644 drivers/block/DAC960.h
diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960
deleted file mode 100644
index bd85fb9dc6e5..000000000000
--- a/Documentation/blockdev/README.DAC960
+++ /dev/null
@@ -1,756 +0,0 @@
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Version 2.2.11 for Linux 2.2.19
- Version 2.4.11 for Linux 2.4.12
-
- PRODUCTION RELEASE
-
- 11 October 2001
-
- Leonard N. Zubkoff
- Dandelion Digital
- lnz@dandelion.com
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
-
- INTRODUCTION
-
-Mylex, Inc. designs and manufactures a variety of high performance PCI RAID
-controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont,
-California 94555, USA and can be reached at 510.796.6100 or on the World Wide
-Web at http://www.mylex.com. Mylex Technical Support can be reached by
-electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at
-510.745.7715. Contact information for offices in Europe and Japan is available
-on their Web site.
-
-The latest information on Linux support for DAC960 PCI RAID Controllers, as
-well as the most recent release of this driver, will always be available from
-my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960
-driver supports all current Mylex PCI RAID controllers including the new
-eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely
-new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250,
-and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as
-minimum firmware version requirements. For simplicity, in most places this
-documentation refers to DAC960 generically rather than explicitly listing all
-the supported models.
-
-Driver bug reports should be sent via electronic mail to "lnz@dandelion.com".
-Please include with the bug report the complete configuration messages reported
-by the driver at startup, along with any subsequent system messages relevant to
-the controller's operation, and a detailed description of your system's
-hardware configuration. Driver bugs are actually quite rare; if you encounter
-problems with disks being marked offline, for example, please contact Mylex
-Technical Support as the problem is related to the hardware configuration
-rather than the Linux driver.
-
-Please consult the RAID controller documentation for detailed information
-regarding installation and configuration of the controllers. This document
-primarily provides information specific to the Linux support.
-
-
- DRIVER FEATURES
-
-The DAC960 RAID controllers are supported solely as high performance RAID
-controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960
-driver operates at the block device level, the same level as the SCSI and IDE
-drivers. Unlike other RAID controllers currently supported on Linux, the
-DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the
-complexity and unnecessary code that would be associated with an implementation
-as a SCSI driver. The DAC960 driver is designed for as high a performance as
-possible with no compromises or extra code for compatibility with lower
-performance devices. The DAC960 driver includes extensive error logging and
-online configuration management capabilities. Except for initial configuration
-of the controller and adding new disk drives, most everything can be handled
-from Linux while the system is operational.
-
-The DAC960 driver is architected to support up to 8 controllers per system.
-Each DAC960 parallel SCSI controller can support up to 15 disk drives per
-channel, for a maximum of 60 drives on a four channel controller; the fibre
-channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for
-a total of 250 drives. The drives installed on a controller are divided into
-one or more "Drive Groups", and then each Drive Group is subdivided further
-into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level
-and caching policy associated with it, and it appears to Linux as a single
-block device. Logical Drives are further subdivided into up to 7 partitions
-through the normal Linux and PC disk partitioning schemes. Logical Drives are
-also known as "System Drives", and Drive Groups are also called "Packs". Both
-terms are in use in the Mylex documentation; I have chosen to standardize on
-the more generic "Logical Drive" and "Drive Group".
-
-DAC960 RAID disk devices are named in the style of the obsolete Device File
-System (DEVFS). The device corresponding to Logical Drive D on Controller C
-is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1
-through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on
-Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI
-disks the device names will not change in the event of a disk drive failure.
-The DAC960 driver is assigned major numbers 48 - 55 with one major number per
-controller. The 8 bits of minor number are divided into 5 bits for the Logical
-Drive and 3 bits for the partition.
-
-
- SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS
-
-The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID
-PCI RAID Controllers as of the date of this document. It is recommended that
-anyone purchasing a Mylex PCI RAID Controller not in the following table
-contact the author beforehand to verify that it is or will be supported.
-
-eXtremeRAID 3000
- 1 Wide Ultra-2/LVD SCSI channel
- 2 External Fibre FC-AL channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-eXtremeRAID 2000
- 4 Wide Ultra-160 LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 352
- 2 Wide Ultra-160 LVD SCSI channels
- 100MHz Intel i960RN RISC Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 170
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RM RISC Processor
- 16MB/32MB/64MB ECC SDRAM Memory
-
-AcceleRAID 160 (AcceleRAID 170LP)
- 1 Wide Ultra-160 LVD SCSI channel
- 100MHz Intel i960RS RISC Processor
- Built in 16M ECC SDRAM Memory
- PCI Low Profile Form Factor - fit for 2U height
-
-eXtremeRAID 1100 (DAC1164P)
- 3 Wide Ultra-2/LVD SCSI channels
- 233MHz StrongARM SA 110 Processor
- 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots)
- 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup
-
-AcceleRAID 250 (DAC960PTL1)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 200 (DAC960PTL0)
- Uses onboard Symbios SCSI chips on certain motherboards
- Includes no onboard SCSI Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-AcceleRAID 150 (DAC960PRL)
- Uses onboard Symbios SCSI chips on certain motherboards
- Also includes one onboard Wide Ultra-2/LVD SCSI Channel
- 33MHz Intel i960RP RISC Processor
- 4MB Parity EDO Memory
-
-DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels
- 66MHz Intel i960RD RISC Processor
- 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory
-
-DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels
- 33MHz Intel i960RP RISC Processor
- 4MB/8MB ECC EDO Memory
-
-DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PD 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960CF RISC Processor
- 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960PL 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-DAC960P 1/2/3 Wide Fast SCSI-2 Channels
- Intel i960 RISC Processor
- 2MB/4MB/8MB/16MB/32MB DRAM Memory
-
-For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version
-6.00-01 or above is required.
-
-For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required.
-
-For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is
-required.
-
-For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required.
-
-For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version
-3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware
-version 2.73-0-00 or above is required (for single Flash ROM controllers)
-
-Please note that not all SCSI disk drives are suitable for use with DAC960
-controllers, and only particular firmware versions of any given model may
-actually function correctly. Similarly, not all motherboards have a BIOS that
-properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150,
-DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device.
-If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to
-verify compatibility. Mylex makes available a hard disk compatibility list at
-http://www.mylex.com/support/hdcomp/hd-lists.html.
-
-
- DRIVER INSTALLATION
-
-This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12.
-
-To install the DAC960 RAID driver, you may use the following commands,
-replacing "/usr/src" with wherever you keep your Linux kernel source tree:
-
- cd /usr/src
- tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz)
- mv README.DAC960 linux/Documentation
- mv DAC960.[ch] linux/drivers/block
- patch -p0 < DAC960.patch (if DAC960.patch is included)
- cd linux
- make config
- make bzImage (or zImage)
-
-Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your
-standard kernel, run lilo if appropriate, and reboot.
-
-To create the necessary devices in /dev, the "make_rd" script included in
-"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used.
-LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive
-are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with
-statically linked executables of LILO and FDISK. This modified version of LILO
-will allow booting from a DAC960 controller and/or mounting the root file
-system from a DAC960.
-
-Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID
-controllers. Installing directly onto a DAC960 may be problematic from other
-Linux distributions until their installation utilities are updated.
-
-
- INSTALLATION NOTES
-
-Before installing Linux or adding DAC960 logical drives to an existing Linux
-system, the controller must first be configured to provide one or more logical
-drives using the BIOS Configuration Utility or DACCF. Please note that since
-there are only at most 6 usable partitions on each logical drive, systems
-requiring more partitions should subdivide a drive group into multiple logical
-drives, each of which can have up to 6 usable partitions. Also, note that with
-large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63)
-rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do
-will cause the logical drive geometry to have more than 65535 cylinders which
-will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry
-can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M
-during the BIOS initialization sequence.
-
-For maximum performance and the most efficient E2FSCK performance, it is
-recommended that EXT2 file systems be built with a 4KB block size and 16 block
-stride to match the DAC960 controller's 64KB default stripe size. The command
-"mke2fs -b 4096 -R stride=16 <device>" is appropriate. Unless there will be a
-large number of small files on the file systems, it is also beneficial to add
-the "-i 16384" option to increase the bytes per inode parameter thereby
-reducing the file system metadata. Finally, on systems that will only be run
-with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks
-with the "-s 1" option.
-
-
- DAC960 ANNOUNCEMENTS MAILING LIST
-
-The DAC960 Announcements Mailing List provides a forum for informing Linux
-users of new driver releases and other announcements regarding Linux support
-for DAC960 PCI RAID Controllers. To join the mailing list, send a message to
-"dac960-announce-request@dandelion.com" with the line "subscribe" in the
-message body.
-
-
- CONTROLLER CONFIGURATION AND STATUS MONITORING
-
-The DAC960 RAID controllers running firmware 4.06 or above include a Background
-Initialization facility so that system downtime is minimized both for initial
-installation and subsequent configuration of additional storage. The BIOS
-Configuration Utility (accessible via Alt-R during the BIOS initialization
-sequence) is used to quickly configure the controller, and then the logical
-drives that have been created are available for immediate use even while they
-are still being initialized by the controller. The primary need for online
-configuration and status monitoring is then to avoid system downtime when disk
-drives fail and must be replaced. Mylex's online monitoring and configuration
-utilities are being ported to Linux and will become available at some point in
-the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure)
-enclosure, the controller is able to rebuild failed drives automatically as
-soon as a drive replacement is made available.
-
-The primary interfaces for controller configuration and status monitoring are
-special files created in the /proc/rd/... hierarchy along with the normal
-system console logging mechanism. Whenever the system is operating, the DAC960
-driver queries each controller for status information every 10 seconds, and
-checks for additional conditions every 60 seconds. The initial status of each
-controller is always available for controller N in /proc/rd/cN/initial_status,
-and the current status as of the last status monitoring query is available in
-/proc/rd/cN/current_status. In addition, status changes are also logged by the
-driver to the system console and will appear in the log files maintained by
-syslog. The progress of asynchronous rebuild or consistency check operations
-is also available in /proc/rd/cN/current_status, and progress messages are
-logged to the system console at most every 60 seconds.
-
-Starting with the 2.2.3/2.0.3 versions of the driver, the status information
-available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been
-augmented to include the vendor, model, revision, and serial number (if
-available) for each physical device found connected to the controller:
-
-***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PRL PCI RAID Controller
- Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB
- PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- SAF-TE Enclosure Management Enabled
- Physical Devices:
- 0:0 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68016775HA
- Disk Status: Online, 17928192 blocks
- 0:1 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68004E53HA
- Disk Status: Online, 17928192 blocks
- 0:2 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13013935HA
- Disk Status: Online, 17928192 blocks
- 0:3 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 13016897HA
- Disk Status: Online, 17928192 blocks
- 0:4 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68019905HA
- Disk Status: Online, 17928192 blocks
- 0:5 Vendor: IBM Model: DRVS09D Revision: 0270
- Serial Number: 68012753HA
- Disk Status: Online, 17928192 blocks
- 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-To simplify the monitoring process for custom software, the special file
-/proc/rd/status returns "OK" when all DAC960 controllers in the system are
-operating normally and no failures have occurred, or "ALERT" if any logical
-drives are offline or critical or any non-standby physical drives are dead.
-
-Configuration commands for controller N are available via the special file
-/proc/rd/cN/user_command. A human readable command can be written to this
-special file to initiate a configuration operation, and the results of the
-operation can then be read back from the special file in addition to being
-logged to the system console. The shell command sequence
-
- echo "<configuration-command>" > /proc/rd/c0/user_command
- cat /proc/rd/c0/user_command
-
-is typically used to execute configuration commands. The configuration
-commands are:
-
- flush-cache
-
- The "flush-cache" command flushes the controller's cache. The system
- automatically flushes the cache at shutdown or if the driver module is
- unloaded, so this command is only needed to be certain a write back cache
- is flushed to disk before the system is powered off by a command to a UPS.
- Note that the flush-cache command also stops an asynchronous rebuild or
- consistency check, so it should not be used except when the system is being
- halted.
-
- kill <channel>:<target-id>
-
- The "kill" command marks the physical drive <channel>:<target-id> as DEAD.
- This command is provided primarily for testing, and should not be used
- during normal system operation.
-
- make-online <channel>:<target-id>
-
- The "make-online" command changes the physical drive <channel>:<target-id>
- from status DEAD to status ONLINE. In cases where multiple physical drives
- have been killed simultaneously, this command may be used to bring all but
- one of them back online, after which a rebuild to the final drive is
- necessary.
-
- Warning: make-online should only be used on a dead physical drive that is
- an active part of a drive group, never on a standby drive. The command
- should never be used on a dead drive that is part of a critical logical
- drive; rebuild should be used if only a single drive is dead.
-
- make-standby <channel>:<target-id>
-
- The "make-standby" command changes physical drive <channel>:<target-id>
- from status DEAD to status STANDBY. It should only be used in cases where
- a dead drive was replaced after an automatic rebuild was performed onto a
- standby drive. It cannot be used to add a standby drive to the controller
- configuration if one was not created initially; the BIOS Configuration
- Utility must be used for that currently.
-
- rebuild <channel>:<target-id>
-
- The "rebuild" command initiates an asynchronous rebuild onto physical drive
- <channel>:<target-id>. It should only be used when a dead drive has been
- replaced.
-
- check-consistency <logical-drive-number>
-
- The "check-consistency" command initiates an asynchronous consistency check
- of <logical-drive-number> with automatic restoration. It can be used
- whenever it is desired to verify the consistency of the redundancy
- information.
-
- cancel-rebuild
- cancel-consistency-check
-
- The "cancel-rebuild" and "cancel-consistency-check" commands cancel any
- rebuild or consistency check operations previously initiated.
-
-
- EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group without a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:1 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages indicating that Logical
-Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:1 is now DEAD
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-The Sense Keys logged here are just Check Condition / Unit Attention conditions
-arising from a SCSI bus reset that is forced by the controller during its error
-recovery procedures. Concurrently with the above, the driver status available
-from /proc/rd also reflects the drive failure. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Dead, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-Since there are no standby drives configured, the system can continue to access
-the logical drives in a performance degraded mode until the failed drive is
-replaced and a rebuild operation completed to restore the redundancy of the
-logical drives. Once Physical Drive 1:1 is replaced with a properly
-functioning drive, or if the physical drive was killed without having failed
-(e.g., due to electrical problems on the SCSI bus), the user can instruct the
-controller to initiate a rebuild operation onto the newly replaced drive:
-
-gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Rebuild of Physical Drive 1:1 Initiated
-
-The echo command instructs the controller to initiate an asynchronous rebuild
-operation onto Physical Drive 1:1, and the status message that results from the
-operation is then available for reading from /proc/rd/c0/user_command, as well
-as being logged to the console by the driver.
-
-Within 10 seconds of this command the driver logs the initiation of the
-asynchronous rebuild operation:
-
-DAC960#0: Rebuild of Physical Drive 1:1 Initiated
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:1 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Write-Only, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed
-
-and every minute a progress message is logged to the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:1 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-
- EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE
-
-The following annotated logs demonstrate the controller configuration and and
-online status monitoring capabilities of the Linux DAC960 Driver. The test
-configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a
-DAC960PJ controller. The physical drives are configured into a single drive
-group with a standby drive, and the drive group has been configured into two
-logical drives, one RAID-5 and one RAID-6. Note that these logs are from an
-earlier version of the driver and the messages have changed somewhat with newer
-releases, but the functionality remains similar. First, here is the current
-status of the RAID configuration:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Online, 2201600 blocks
- 1:3 - Disk: Standby, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- No Rebuild or Consistency Check in Progress
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-The above messages indicate that everything is healthy, and /proc/rd/status
-returns "OK" indicating that there are no problems with any DAC960 controller
-in the system. For demonstration purposes, while I/O is active Physical Drive
-1:2 is now disconnected, simulating a drive failure. The failure is noted by
-the driver within 10 seconds of the controller's having detected it, and the
-driver logs the following console status messages:
-
-DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02
-DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command
-DAC960#0: Physical Drive 1:2 is now DEAD
-DAC960#0: Physical Drive 1:2 killed because it was removed
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL
-
-Since a standby drive is configured, the controller automatically begins
-rebuilding onto the standby drive:
-
-DAC960#0: Physical Drive 1:3 is now WRITE-ONLY
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-Concurrently with the above, the driver status available from /proc/rd also
-reflects the drive failure and automatic rebuild. The status message in
-/proc/rd/status has changed from "OK" to "ALERT":
-
-gwynedd:/u/lnz# cat /proc/rd/status
-ALERT
-
-and /proc/rd/c0/current_status has been updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed
-
-As the rebuild progresses, the current status in /proc/rd/c0/current_status is
-updated every 10 seconds:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Write-Only, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru
- Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-
-and every minute a progress message is logged on the console by the driver:
-
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed
-DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed
-DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed
-
-Finally, the rebuild completes successfully. The driver logs the status of the
-logical and physical drives and the rebuild completion:
-
-DAC960#0: Rebuild Completed Successfully
-DAC960#0: Physical Drive 1:3 is now ONLINE
-DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE
-DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE
-
-/proc/rd/c0/current_status is updated:
-
-***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 *****
-Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
-Configuring Mylex DAC960PJ PCI RAID Controller
- Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB
- PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned
- PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9
- Controller Queue Depth: 128, Maximum Blocks per Command: 128
- Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33
- Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Dead, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
-
-and /proc/rd/status indicates that everything is healthy once again:
-
-gwynedd:/u/lnz# cat /proc/rd/status
-OK
-
-Note that the absence of a viable standby drive does not create an "ALERT"
-status. Once dead Physical Drive 1:2 has been replaced, the controller must be
-told that this has occurred and that the newly replaced drive should become the
-new standby drive:
-
-gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command
-gwynedd:/u/lnz# cat /proc/rd/c0/user_command
-Make Standby of Physical Drive 1:2 Succeeded
-
-The echo command instructs the controller to make Physical Drive 1:2 into a
-standby drive, and the status message that results from the operation is then
-available for reading from /proc/rd/c0/user_command, as well as being logged to
-the console by the driver. Within 60 seconds of this command the driver logs:
-
-DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01
-DAC960#0: Physical Drive 1:2 is now STANDBY
-DAC960#0: Make Standby of Physical Drive 1:2 Succeeded
-
-and /proc/rd/c0/current_status is updated:
-
-gwynedd:/u/lnz# cat /proc/rd/c0/current_status
- ...
- Physical Devices:
- 0:1 - Disk: Online, 2201600 blocks
- 0:2 - Disk: Online, 2201600 blocks
- 0:3 - Disk: Online, 2201600 blocks
- 1:1 - Disk: Online, 2201600 blocks
- 1:2 - Disk: Standby, 2201600 blocks
- 1:3 - Disk: Online, 2201600 blocks
- Logical Drives:
- /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru
- /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru
- Rebuild Completed Successfully
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
deleted file mode 100644
index 581312ac375f..000000000000
--- a/drivers/block/DAC960.c
+++ /dev/null
@@ -1,7229 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
- Portions Copyright 2002 by Mylex (An IBM Business Unit)
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
-*/
-
-
-#define DAC960_DriverVersion "2.5.49"
-#define DAC960_DriverDate "21 Aug 2007"
-
-
-#include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/blkdev.h>
-#include <linux/bio.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/genhd.h>
-#include <linux/hdreg.h>
-#include <linux/blkpg.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/reboot.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/random.h>
-#include <linux/scatterlist.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include "DAC960.h"
-
-#define DAC960_GAM_MINOR 252
-
-
-static DEFINE_MUTEX(DAC960_mutex);
-static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers];
-static int DAC960_ControllerCount;
-static struct proc_dir_entry *DAC960_ProcDirectoryEntry;
-
-static long disk_size(DAC960_Controller_T *p, int drive_nr)
-{
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (drive_nr >= p->LogicalDriveCount)
- return 0;
- return p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (i == NULL)
- return 0;
- return i->ConfigurableDeviceSize;
- }
-}
-
-static int DAC960_open(struct block_device *bdev, fmode_t mode)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
- int ret = -ENXIO;
-
- mutex_lock(&DAC960_mutex);
- if (p->FirmwareType == DAC960_V1_Controller) {
- if (p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveState == DAC960_V1_LogicalDrive_Offline)
- goto out;
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline)
- goto out;
- }
-
- check_disk_change(bdev);
-
- if (!get_capacity(p->disks[drive_nr]))
- goto out;
- ret = 0;
-out:
- mutex_unlock(&DAC960_mutex);
- return ret;
-}
-
-static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
- struct gendisk *disk = bdev->bd_disk;
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (p->FirmwareType == DAC960_V1_Controller) {
- geo->heads = p->V1.GeometryTranslationHeads;
- geo->sectors = p->V1.GeometryTranslationSectors;
- geo->cylinders = p->V1.LogicalDriveInformation[drive_nr].
- LogicalDriveSize / (geo->heads * geo->sectors);
- } else {
- DAC960_V2_LogicalDeviceInfo_T *i =
- p->V2.LogicalDeviceInformation[drive_nr];
- switch (i->DriveGeometry) {
- case DAC960_V2_Geometry_128_32:
- geo->heads = 128;
- geo->sectors = 32;
- break;
- case DAC960_V2_Geometry_255_63:
- geo->heads = 255;
- geo->sectors = 63;
- break;
- default:
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- p, i->DriveGeometry);
- return -EINVAL;
- }
-
- geo->cylinders = i->ConfigurableDeviceSize /
- (geo->heads * geo->sectors);
- }
-
- return 0;
-}
-
-static unsigned int DAC960_check_events(struct gendisk *disk,
- unsigned int clearing)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int drive_nr = (long)disk->private_data;
-
- if (!p->LogicalDriveInitiallyAccessible[drive_nr])
- return DISK_EVENT_MEDIA_CHANGE;
- return 0;
-}
-
-static int DAC960_revalidate_disk(struct gendisk *disk)
-{
- DAC960_Controller_T *p = disk->queue->queuedata;
- int unit = (long)disk->private_data;
-
- set_capacity(disk, disk_size(p, unit));
- return 0;
-}
-
-static const struct block_device_operations DAC960_BlockDeviceOperations = {
- .owner = THIS_MODULE,
- .open = DAC960_open,
- .getgeo = DAC960_getgeo,
- .check_events = DAC960_check_events,
- .revalidate_disk = DAC960_revalidate_disk,
-};
-
-
-/*
- DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name,
- Copyright Notice, and Electronic Mail Address.
-*/
-
-static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller)
-{
- DAC960_Announce("***** DAC960 RAID Driver Version "
- DAC960_DriverVersion " of "
- DAC960_DriverDate " *****\n", Controller);
- DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff "
- "<lnz@dandelion.com>\n", Controller);
-}
-
-
-/*
- DAC960_Failure prints a standardized error message, and then returns false.
-*/
-
-static bool DAC960_Failure(DAC960_Controller_T *Controller,
- unsigned char *ErrorMessage)
-{
- DAC960_Error("While configuring DAC960 PCI RAID Controller at\n",
- Controller);
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage);
- return false;
-}
-
-/*
- init_dma_loaf() and slice_dma_loaf() are helper functions for
- aggregating the dma-mapped memory for a well-known collection of
- data structures that are of different lengths.
-
- These routines don't guarantee any alignment. The caller must
- include any space needed for alignment in the sizes of the structures
- that are passed in.
- */
-
-static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf,
- size_t len)
-{
- void *cpu_addr;
- dma_addr_t dma_handle;
-
- cpu_addr = pci_alloc_consistent(dev, len, &dma_handle);
- if (cpu_addr == NULL)
- return false;
-
- loaf->cpu_free = loaf->cpu_base = cpu_addr;
- loaf->dma_free =loaf->dma_base = dma_handle;
- loaf->length = len;
- memset(cpu_addr, 0, len);
- return true;
-}
-
-static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len,
- dma_addr_t *dma_handle)
-{
- void *cpu_end = loaf->cpu_free + len;
- void *cpu_addr = loaf->cpu_free;
-
- BUG_ON(cpu_end > loaf->cpu_base + loaf->length);
- *dma_handle = loaf->dma_free;
- loaf->cpu_free = cpu_end;
- loaf->dma_free += len;
- return cpu_addr;
-}
-
-static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle)
-{
- if (loaf_handle->cpu_base != NULL)
- pci_free_consistent(dev, loaf_handle->length,
- loaf_handle->cpu_base, loaf_handle->dma_base);
-}
-
-
-/*
- DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary
- data structures for Controller. It returns true on success and false on
- failure.
-*/
-
-static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int CommandAllocationLength, CommandAllocationGroupSize;
- int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount;
- void *AllocationPointer = NULL;
- void *ScatterGatherCPU = NULL;
- dma_addr_t ScatterGatherDMA;
- struct dma_pool *ScatterGatherPool;
- void *RequestSenseCPU = NULL;
- dma_addr_t RequestSenseDMA;
- struct dma_pool *RequestSensePool = NULL;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker);
- CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V1_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T),
- sizeof(DAC960_V1_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- Controller->ScatterGatherPool = ScatterGatherPool;
- }
- else
- {
- CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker);
- CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize;
- ScatterGatherPool = dma_pool_create("DAC960_V2_ScatterGather",
- &Controller->PCIDevice->dev,
- DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T),
- sizeof(DAC960_V2_ScatterGatherSegment_T), 0);
- if (ScatterGatherPool == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- RequestSensePool = dma_pool_create("DAC960_V2_RequestSense",
- &Controller->PCIDevice->dev, sizeof(DAC960_SCSI_RequestSense_T),
- sizeof(int), 0);
- if (RequestSensePool == NULL) {
- dma_pool_destroy(ScatterGatherPool);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION (SG)");
- }
- Controller->ScatterGatherPool = ScatterGatherPool;
- Controller->V2.RequestSensePool = RequestSensePool;
- }
- Controller->CommandAllocationGroupSize = CommandAllocationGroupSize;
- Controller->FreeCommands = NULL;
- for (CommandIdentifier = 1;
- CommandIdentifier <= Controller->DriverQueueDepth;
- CommandIdentifier++)
- {
- DAC960_Command_T *Command;
- if (--CommandsRemaining <= 0)
- {
- CommandsRemaining =
- Controller->DriverQueueDepth - CommandIdentifier + 1;
- if (CommandsRemaining > CommandAllocationGroupSize)
- CommandsRemaining = CommandAllocationGroupSize;
- CommandGroupByteCount =
- CommandsRemaining * CommandAllocationLength;
- AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC);
- if (AllocationPointer == NULL)
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- Command = (DAC960_Command_T *) AllocationPointer;
- AllocationPointer += CommandAllocationLength;
- Command->CommandIdentifier = CommandIdentifier;
- Command->Controller = Controller;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
- Controller->Commands[CommandIdentifier-1] = Command;
- ScatterGatherCPU = dma_pool_alloc(ScatterGatherPool, GFP_ATOMIC,
- &ScatterGatherDMA);
- if (ScatterGatherCPU == NULL)
- return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION");
-
- if (RequestSensePool != NULL) {
- RequestSenseCPU = dma_pool_alloc(RequestSensePool, GFP_ATOMIC,
- &RequestSenseDMA);
- if (RequestSenseCPU == NULL) {
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU,
- ScatterGatherDMA);
- return DAC960_Failure(Controller,
- "AUXILIARY STRUCTURE CREATION");
- }
- }
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- Command->cmd_sglist = Command->V1.ScatterList;
- Command->V1.ScatterGatherList =
- (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V1.ScatterGatherListDMA = ScatterGatherDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit);
- } else {
- Command->cmd_sglist = Command->V2.ScatterList;
- Command->V2.ScatterGatherList =
- (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU;
- Command->V2.ScatterGatherListDMA = ScatterGatherDMA;
- Command->V2.RequestSense =
- (DAC960_SCSI_RequestSense_T *)RequestSenseCPU;
- Command->V2.RequestSenseDMA = RequestSenseDMA;
- sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit);
- }
- }
- return true;
-}
-
-
-/*
- DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data
- structures for Controller.
-*/
-
-static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller)
-{
- int i;
- struct dma_pool *ScatterGatherPool = Controller->ScatterGatherPool;
- struct dma_pool *RequestSensePool = NULL;
- void *ScatterGatherCPU;
- dma_addr_t ScatterGatherDMA;
- void *RequestSenseCPU;
- dma_addr_t RequestSenseDMA;
- DAC960_Command_T *CommandGroup = NULL;
-
-
- if (Controller->FirmwareType == DAC960_V2_Controller)
- RequestSensePool = Controller->V2.RequestSensePool;
-
- Controller->FreeCommands = NULL;
- for (i = 0; i < Controller->DriverQueueDepth; i++)
- {
- DAC960_Command_T *Command = Controller->Commands[i];
-
- if (Command == NULL)
- continue;
-
- if (Controller->FirmwareType == DAC960_V1_Controller) {
- ScatterGatherCPU = (void *)Command->V1.ScatterGatherList;
- ScatterGatherDMA = Command->V1.ScatterGatherListDMA;
- RequestSenseCPU = NULL;
- RequestSenseDMA = (dma_addr_t)0;
- } else {
- ScatterGatherCPU = (void *)Command->V2.ScatterGatherList;
- ScatterGatherDMA = Command->V2.ScatterGatherListDMA;
- RequestSenseCPU = (void *)Command->V2.RequestSense;
- RequestSenseDMA = Command->V2.RequestSenseDMA;
- }
- if (ScatterGatherCPU != NULL)
- dma_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA);
- if (RequestSenseCPU != NULL)
- dma_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA);
-
- if ((Command->CommandIdentifier
- % Controller->CommandAllocationGroupSize) == 1) {
- /*
- * We can't free the group of commands until all of the
- * request sense and scatter gather dma structures are free.
- * Remember the beginning of the group, but don't free it
- * until we've reached the beginning of the next group.
- */
- kfree(CommandGroup);
- CommandGroup = Command;
- }
- Controller->Commands[i] = NULL;
- }
- kfree(CommandGroup);
-
- if (Controller->CombinedStatusBuffer != NULL)
- {
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NULL;
- Controller->CurrentStatusBuffer = NULL;
- }
-
- dma_pool_destroy(ScatterGatherPool);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return;
-
- dma_pool_destroy(RequestSensePool);
-
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- kfree(Controller->V2.LogicalDeviceInformation[i]);
- Controller->V2.LogicalDeviceInformation[i] = NULL;
- }
-
- for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++)
- {
- kfree(Controller->V2.PhysicalDeviceInformation[i]);
- Controller->V2.PhysicalDeviceInformation[i] = NULL;
- kfree(Controller->V2.InquiryUnitSerialNumber[i]);
- Controller->V2.InquiryUnitSerialNumber[i] = NULL;
- }
-}
-
-
-/*
- DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1
- Firmware Controllers.
-*/
-
-static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandStatus = 0;
-}
-
-
-/*
- DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2
- Firmware Controllers.
-*/
-
-static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command)
-{
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- Command->V2.CommandStatus = 0;
-}
-
-
-/*
- DAC960_AllocateCommand allocates a Command structure from Controller's
- free list. During driver initialization, a special initialization command
- has been placed on the free list to guarantee that command allocation can
- never fail.
-*/
-
-static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T
- *Controller)
-{
- DAC960_Command_T *Command = Controller->FreeCommands;
- if (Command == NULL) return NULL;
- Controller->FreeCommands = Command->Next;
- Command->Next = NULL;
- return Command;
-}
-
-
-/*
- DAC960_DeallocateCommand deallocates Command, returning it to Controller's
- free list.
-*/
-
-static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
-
- Command->Request = NULL;
- Command->Next = Controller->FreeCommands;
- Controller->FreeCommands = Command;
-}
-
-
-/*
- DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue.
-*/
-
-static void DAC960_WaitForCommand(DAC960_Controller_T *Controller)
-{
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands);
- spin_lock_irq(&Controller->queue_lock);
-}
-
-/*
- DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers.
-*/
-
-static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
-
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
-
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress);
-
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
-
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
-
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-/*
- DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers.
-*/
-
-static void DAC960_BA_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers.
-*/
-
-static void DAC960_LP_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox =
- Controller->V2.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V2.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.PreviousCommandMailbox1;
- Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V2.LastCommandMailbox)
- NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series
- Controllers with Dual Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series
- Controllers with Single Mode Firmware.
-*/
-
-static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox =
- Controller->V1.NextCommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox);
- if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 ||
- Controller->V1.PreviousCommandMailbox2->Words[0] == 0)
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.PreviousCommandMailbox1;
- Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox;
- if (++NextCommandMailbox > Controller->V1.LastCommandMailbox)
- NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.NextCommandMailbox = NextCommandMailbox;
-}
-
-
-/*
- DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers.
-*/
-
-static void DAC960_PD_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers.
-*/
-
-static void DAC960_P_QueueCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier;
- switch (CommandMailbox->Common.CommandOpcode)
- {
- case DAC960_V1_Enquiry:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old;
- break;
- case DAC960_V1_GetDeviceState:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old;
- break;
- case DAC960_V1_Read:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write:
- CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather:
- CommandMailbox->Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather_Old;
- DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- while (DAC960_PD_MailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox);
- DAC960_PD_NewCommand(ControllerBaseAddress);
-}
-
-
-/*
- DAC960_ExecuteCommand executes Command and waits for completion.
-*/
-
-static void DAC960_ExecuteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DECLARE_COMPLETION_ONSTACK(Completion);
- unsigned long flags;
- Command->Completion = &Completion;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- if (in_interrupt())
- return;
- wait_for_completion(&Completion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char CommandOpcode2,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3B.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2;
- CommandMailbox->Type3B.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D
- Command and waits for completion. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller,
- DAC960_V1_CommandOpcode_T CommandOpcode,
- unsigned char Channel,
- unsigned char TargetID,
- dma_addr_t DataDMA)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Type3D.CommandOpcode = CommandOpcode;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.BusAddress = DataDMA;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V1_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information
- Reading IOCTL Command and waits for completion. It returns true on success
- and false on failure.
-
- Return data in The controller's HealthStatusBuffer, which is dma-able memory
-*/
-
-static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T);
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller
- Information Reading IOCTL Command and waits for completion. It returns
- true on success and false on failure.
-
- Data is returned in the controller's V2.NewControllerInformation dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical
- Device Information Reading IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- Data is returned in the controller's V2.NewLogicalDeviceInformation
-*/
-
-static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned short LogicalDeviceNumber)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->LogicalDeviceInfo.CommandOpcode =
- DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->LogicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read
- Physical Device Information" IOCTL Command and waits for completion. It
- returns true on success and false on failure.
-
- The Channel, TargetID, LogicalUnit arguments should be 0 the first time
- this function is called for a given controller. This will return data
- for the "first" device on that controller. The returned data includes a
- Channel, TargetID, LogicalUnit that can be passed in to this routine to
- get data for the NEXT device on that controller.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-
-*/
-
-static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned char LogicalUnit)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-static void DAC960_V2_ConstructNewUnitSerialNumber(
- DAC960_Controller_T *Controller,
- DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID,
- int LogicalUnit)
-{
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru;
- CommandMailbox->SCSI_10.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->SCSI_10.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->SCSI_10.DataTransferSize =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit;
- CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel;
- CommandMailbox->SCSI_10.CDBLength = 6;
- CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */
- CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */
- CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */
- CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */
- CommandMailbox->SCSI_10.SCSI_CDB[4] =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewInquiryUnitSerialNumberDMA;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
-}
-
-
-/*
- DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through
- Inquiry command to a SCSI device identified by Channel number,
- Target id, Logical Unit Number. This function Waits for completion
- of the command.
-
- The return data includes Unit Serial Number information for the
- specified device.
-
- Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able
- memory buffer.
-*/
-
-static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller,
- int Channel, int TargetID, int LogicalUnit)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- Command = DAC960_AllocateCommand(Controller);
- CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Channel, TargetID, LogicalUnit);
-
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device
- Operation IOCTL Command and waits for completion. It returns true on
- success and false on failure.
-*/
-
-static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller,
- DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode,
- DAC960_V2_OperationDevice_T
- OperationDevice)
-{
- DAC960_Command_T *Command = DAC960_AllocateCommand(Controller);
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->DeviceOperation.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->DeviceOperation.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode;
- CommandMailbox->DeviceOperation.OperationDevice = OperationDevice;
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- DAC960_DeallocateCommand(Command);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V1 Firmware Controllers.
-
- PD and P controller types have no memory mailbox, but still need the
- other dma mapped memory.
-*/
-
-static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_HardwareType_T hw_type = Controller->HardwareType;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V1_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V1_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_CommandStatus_T CommandStatus;
- int TimeoutCounter;
- int i;
-
- memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T));
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) {
- CommandMailboxesSize = 0;
- StatusMailboxesSize = 0;
- } else {
- CommandMailboxesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T);
- }
- DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) +
- sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) +
- sizeof(DAC960_V1_RebuildProgress_T) +
- sizeof(DAC960_V1_LogicalDriveInformationArray_T) +
- sizeof(DAC960_V1_BackgroundInitializationStatus_T) +
- sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize))
- return false;
-
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- goto skip_mailboxes;
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V1.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1;
- Controller->V1.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox;
- Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox;
- Controller->V1.PreviousCommandMailbox2 =
- Controller->V1.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V1.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1;
- Controller->V1.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox;
-
-skip_mailboxes:
- Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DCDB_T),
- &Controller->V1.MonitoringDCDB_DMA);
-
- Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_Enquiry_T),
- &Controller->V1.NewEnquiryDMA);
-
- Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_ErrorTable_T),
- &Controller->V1.NewErrorTableDMA);
-
- Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_EventLogEntry_T),
- &Controller->V1.EventLogEntryDMA);
-
- Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_RebuildProgress_T),
- &Controller->V1.RebuildProgressDMA);
-
- Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T),
- &Controller->V1.NewLogicalDriveInformationDMA);
-
- Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T),
- &Controller->V1.BackgroundInitializationStatusDMA);
-
- Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V1_DeviceState_T),
- &Controller->V1.NewDeviceStateDMA);
-
- Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_T),
- &Controller->V1.NewInquiryStandardDataDMA);
-
- Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V1.NewInquiryUnitSerialNumberDMA);
-
- if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller))
- return true;
-
- /* Enable the Memory Mailbox Interface. */
- Controller->V1.DualModeMemoryMailboxInterface = true;
- CommandMailbox.TypeX.CommandOpcode = 0x2B;
- CommandMailbox.TypeX.CommandIdentifier = 0;
- CommandMailbox.TypeX.CommandOpcode2 = 0x14;
- CommandMailbox.TypeX.CommandMailboxesBusAddress =
- Controller->V1.FirstCommandMailboxDMA;
- CommandMailbox.TypeX.StatusMailboxesBusAddress =
- Controller->V1.FirstStatusMailboxDMA;
-#define TIMEOUT_COUNT 1000000
-
- for (i = 0; i < 2; i++)
- switch (Controller->HardwareType)
- {
- case DAC960_LA_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress);
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_LA_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- case DAC960_PG_Controller:
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox);
- DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress);
-
- TimeoutCounter = TIMEOUT_COUNT;
- while (--TimeoutCounter >= 0)
- {
- if (DAC960_PG_HardwareMailboxStatusAvailableP(
- ControllerBaseAddress))
- break;
- udelay(10);
- }
- if (TimeoutCounter < 0) return false;
- CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- if (CommandStatus == DAC960_V1_NormalCompletion) return true;
- Controller->V1.DualModeMemoryMailboxInterface = false;
- CommandMailbox.TypeX.CommandOpcode2 = 0x10;
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- break;
- }
- return false;
-}
-
-
-/*
- DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface
- for DAC960 V2 Firmware Controllers.
-
- Aggregate the space needed for the controller's memory mailbox and
- the other data structures that will be targets of dma transfers with
- the controller. Allocate a dma-mapped region of memory to hold these
- structures. Then, save CPU pointers and dma_addr_t values to reference
- the structures that are contained in that region.
-*/
-
-static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T
- *Controller)
-{
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- struct pci_dev *PCI_Device = Controller->PCIDevice;
- struct dma_loaf *DmaPages = &Controller->DmaPages;
- size_t DmaPagesSize;
- size_t CommandMailboxesSize;
- size_t StatusMailboxesSize;
-
- DAC960_V2_CommandMailbox_T *CommandMailboxesMemory;
- dma_addr_t CommandMailboxesMemoryDMA;
-
- DAC960_V2_StatusMailbox_T *StatusMailboxesMemory;
- dma_addr_t StatusMailboxesMemoryDMA;
-
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- dma_addr_t CommandMailboxDMA;
- DAC960_V2_CommandStatus_T CommandStatus;
-
- if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)) &&
- pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32)))
- return DAC960_Failure(Controller, "DMA mask out of range");
-
- /* This is a temporary dma mapping, used only in the scope of this function */
- CommandMailbox = pci_alloc_consistent(PCI_Device,
- sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA);
- if (CommandMailbox == NULL)
- return false;
-
- CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T);
- StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T);
- DmaPagesSize =
- CommandMailboxesSize + StatusMailboxesSize +
- sizeof(DAC960_V2_HealthStatusBuffer_T) +
- sizeof(DAC960_V2_ControllerInfo_T) +
- sizeof(DAC960_V2_LogicalDeviceInfo_T) +
- sizeof(DAC960_V2_PhysicalDeviceInfo_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) +
- sizeof(DAC960_V2_Event_T) +
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
-
- if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) {
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return false;
- }
-
- CommandMailboxesMemory = slice_dma_loaf(DmaPages,
- CommandMailboxesSize, &CommandMailboxesMemoryDMA);
-
- /* These are the base addresses for the command memory mailbox array */
- Controller->V2.FirstCommandMailbox = CommandMailboxesMemory;
- Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA;
-
- CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1;
- Controller->V2.LastCommandMailbox = CommandMailboxesMemory;
- Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox;
- Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox;
- Controller->V2.PreviousCommandMailbox2 =
- Controller->V2.LastCommandMailbox - 1;
-
- /* These are the base addresses for the status memory mailbox array */
- StatusMailboxesMemory = slice_dma_loaf(DmaPages,
- StatusMailboxesSize, &StatusMailboxesMemoryDMA);
-
- Controller->V2.FirstStatusMailbox = StatusMailboxesMemory;
- Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA;
- StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1;
- Controller->V2.LastStatusMailbox = StatusMailboxesMemory;
- Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox;
-
- Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_HealthStatusBuffer_T),
- &Controller->V2.HealthStatusBufferDMA);
-
- Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_ControllerInfo_T),
- &Controller->V2.NewControllerInformationDMA);
-
- Controller->V2.NewLogicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_LogicalDeviceInfo_T),
- &Controller->V2.NewLogicalDeviceInformationDMA);
-
- Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- &Controller->V2.NewPhysicalDeviceInformationDMA);
-
- Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- &Controller->V2.NewInquiryUnitSerialNumberDMA);
-
- Controller->V2.Event = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_Event_T),
- &Controller->V2.EventDMA);
-
- Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages,
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T),
- &Controller->V2.PhysicalToLogicalDeviceDMA);
-
- /*
- Enable the Memory Mailbox Interface.
-
- I don't know why we can't just use one of the memory mailboxes
- we just allocated to do this, instead of using this temporary one.
- Try this change later.
- */
- memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1;
- CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB =
- (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB =
- (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10;
- CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0;
- CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0;
- CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1;
- CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress =
- Controller->V2.HealthStatusBufferDMA;
- CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress =
- Controller->V2.FirstCommandMailboxDMA;
- CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress =
- Controller->V2.FirstStatusMailboxDMA;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_BA_Controller:
- while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- case DAC960_LP_Controller:
- while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress))
- udelay(1);
- DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA);
- DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress);
- while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress))
- udelay(1);
- CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress);
- break;
- default:
- DAC960_Failure(Controller, "Unknown Controller Type\n");
- CommandStatus = DAC960_V2_AbormalCompletion;
- break;
- }
- pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T),
- CommandMailbox, CommandMailboxDMA);
- return (CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V1_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V1 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V1_Enquiry2_T *Enquiry2;
- dma_addr_t Enquiry2DMA;
- DAC960_V1_Config2_T *Config2;
- dma_addr_t Config2DMA;
- int LogicalDriveNumber, Channel, TargetID;
- struct dma_loaf local_dma;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T)))
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
-
- Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA);
- Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA);
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry,
- Controller->V1.NewEnquiryDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY");
- }
- memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "ENQUIRY2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "READ CONFIG2");
- }
-
- if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformationDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION");
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
-
- for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++)
- for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) {
- if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState,
- Channel, TargetID,
- Controller->V1.NewDeviceStateDMA)) {
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "GET DEVICE STATE");
- }
- memcpy(&Controller->V1.DeviceState[Channel][TargetID],
- Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T));
- }
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- switch (Enquiry2->HardwareID.SubModel)
- {
- case DAC960_V1_P_PD_PU:
- if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra)
- strcpy(Controller->ModelName, "DAC960PU");
- else strcpy(Controller->ModelName, "DAC960PD");
- break;
- case DAC960_V1_PL:
- strcpy(Controller->ModelName, "DAC960PL");
- break;
- case DAC960_V1_PG:
- strcpy(Controller->ModelName, "DAC960PG");
- break;
- case DAC960_V1_PJ:
- strcpy(Controller->ModelName, "DAC960PJ");
- break;
- case DAC960_V1_PR:
- strcpy(Controller->ModelName, "DAC960PR");
- break;
- case DAC960_V1_PT:
- strcpy(Controller->ModelName, "DAC960PT");
- break;
- case DAC960_V1_PTL0:
- strcpy(Controller->ModelName, "DAC960PTL0");
- break;
- case DAC960_V1_PRL:
- strcpy(Controller->ModelName, "DAC960PRL");
- break;
- case DAC960_V1_PTL1:
- strcpy(Controller->ModelName, "DAC960PTL1");
- break;
- case DAC960_V1_1164P:
- strcpy(Controller->ModelName, "DAC1164P");
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "MODEL VERIFICATION");
- }
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field and verify that it
- is a supported firmware version. The supported firmware versions are:
-
- DAC1164P 5.06 and above
- DAC960PTL/PRL/PJ/PG 4.06 and above
- DAC960PU/PD/PL 3.51 and above
- DAC960PU/PD/PL/P 2.73 and above
- */
-#if defined(CONFIG_ALPHA)
- /*
- DEC Alpha machines were often equipped with DAC960 cards that were
- OEMed from Mylex, and had their own custom firmware. Version 2.70,
- the last custom FW revision to be released by DEC for these older
- controllers, appears to work quite well with this driver.
-
- Cards tested successfully were several versions each of the PD and
- PU, called by DEC the KZPSC and KZPAC, respectively, and having
- the Manufacturer Numbers (from Mylex), usually on a sticker on the
- back of the board, of:
-
- KZPSC: D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel)
- KZPAC: D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel)
- */
-# define FIRMWARE_27X "2.70"
-#else
-# define FIRMWARE_27X "2.73"
-#endif
-
- if (Enquiry2->FirmwareID.MajorVersion == 0)
- {
- Enquiry2->FirmwareID.MajorVersion =
- Controller->V1.Enquiry.MajorFirmwareVersion;
- Enquiry2->FirmwareID.MinorVersion =
- Controller->V1.Enquiry.MinorFirmwareVersion;
- Enquiry2->FirmwareID.FirmwareType = '0';
- Enquiry2->FirmwareID.TurnID = 0;
- }
- snprintf(Controller->FirmwareVersion, sizeof(Controller->FirmwareVersion),
- "%d.%02d-%c-%02d",
- Enquiry2->FirmwareID.MajorVersion,
- Enquiry2->FirmwareID.MinorVersion,
- Enquiry2->FirmwareID.FirmwareType,
- Enquiry2->FirmwareID.TurnID);
- if (!((Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.06") >= 0) ||
- (Controller->FirmwareVersion[0] == '3' &&
- strcmp(Controller->FirmwareVersion, "3.51") >= 0) ||
- (Controller->FirmwareVersion[0] == '2' &&
- strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0)))
- {
- DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION");
- DAC960_Error("Firmware Version = '%s'\n", Controller,
- Controller->FirmwareVersion);
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return false;
- }
- /*
- Initialize the Controller Channels, Targets, Memory Size, and SAF-TE
- Enclosure Management Enabled fields.
- */
- Controller->Channels = Enquiry2->ActualChannels;
- Controller->Targets = Enquiry2->MaxTargets;
- Controller->MemorySize = Enquiry2->MemorySize >> 20;
- Controller->V1.SAFTE_EnclosureManagementEnabled =
- (Enquiry2->FaultManagementType == DAC960_V1_SAFTE);
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount =
- Controller->V1.Enquiry.NumberOfLogicalDrives;
- Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand;
- Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit;
- /*
- Initialize the Stripe Size, Segment Size, and Geometry Translation.
- */
- Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor
- >> (10 - DAC960_BlockSizeBits);
- switch (Config2->DriveGeometry)
- {
- case DAC960_V1_Geometry_128_32:
- Controller->V1.GeometryTranslationHeads = 128;
- Controller->V1.GeometryTranslationSectors = 32;
- break;
- case DAC960_V1_Geometry_255_63:
- Controller->V1.GeometryTranslationHeads = 255;
- Controller->V1.GeometryTranslationSectors = 63;
- break;
- default:
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY");
- }
- /*
- Initialize the Background Initialization Status.
- */
- if ((Controller->FirmwareVersion[0] == '4' &&
- strcmp(Controller->FirmwareVersion, "4.08") >= 0) ||
- (Controller->FirmwareVersion[0] == '5' &&
- strcmp(Controller->FirmwareVersion, "5.08") >= 0))
- {
- Controller->V1.BackgroundInitializationStatusSupported = true;
- DAC960_V1_ExecuteType3B(Controller,
- DAC960_V1_BackgroundInitializationControl, 0x20,
- Controller->
- V1.BackgroundInitializationStatusDMA);
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- }
- /*
- Initialize the Logical Drive Initially Accessible flag.
- */
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- if (Controller->V1.LogicalDriveInformation
- [LogicalDriveNumber].LogicalDriveState !=
- DAC960_V1_LogicalDrive_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true;
- Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress;
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadControllerConfiguration reads the Configuration Information
- from DAC960 V2 Firmware Controllers and initializes the Controller structure.
-*/
-
-static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned short LogicalDeviceNumber = 0;
- int ModelNameLength;
-
- /* Get data into dma-able area, then copy into permanent location */
- if (!DAC960_V2_NewControllerInfo(Controller))
- return DAC960_Failure(Controller, "GET CONTROLLER INFO");
- memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
- sizeof(DAC960_V2_ControllerInfo_T));
-
-
- if (!DAC960_V2_GeneralInfo(Controller))
- return DAC960_Failure(Controller, "GET HEALTH STATUS");
-
- /*
- Initialize the Controller Model Name and Full Model Name fields.
- */
- ModelNameLength = sizeof(ControllerInfo->ControllerName);
- if (ModelNameLength > sizeof(Controller->ModelName)-1)
- ModelNameLength = sizeof(Controller->ModelName)-1;
- memcpy(Controller->ModelName, ControllerInfo->ControllerName,
- ModelNameLength);
- ModelNameLength--;
- while (Controller->ModelName[ModelNameLength] == ' ' ||
- Controller->ModelName[ModelNameLength] == '\0')
- ModelNameLength--;
- Controller->ModelName[++ModelNameLength] = '\0';
- strcpy(Controller->FullModelName, "Mylex ");
- strcat(Controller->FullModelName, Controller->ModelName);
- /*
- Initialize the Controller Firmware Version field.
- */
- sprintf(Controller->FirmwareVersion, "%d.%02d-%02d",
- ControllerInfo->FirmwareMajorVersion,
- ControllerInfo->FirmwareMinorVersion,
- ControllerInfo->FirmwareTurnNumber);
- if (ControllerInfo->FirmwareMajorVersion == 6 &&
- ControllerInfo->FirmwareMinorVersion == 0 &&
- ControllerInfo->FirmwareTurnNumber < 1)
- {
- DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n",
- Controller, Controller->FirmwareVersion);
- DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n",
- Controller);
- DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n",
- Controller);
- }
- /*
- Initialize the Controller Channels, Targets, and Memory Size.
- */
- Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent;
- Controller->Targets =
- ControllerInfo->MaximumTargetsPerChannel
- [ControllerInfo->NumberOfPhysicalChannelsPresent-1];
- Controller->MemorySize = ControllerInfo->MemorySizeMB;
- /*
- Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive
- Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and
- Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one
- less than the Controller Queue Depth to allow for an automatic drive
- rebuild operation.
- */
- Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands;
- Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1;
- if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth)
- Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth;
- Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent;
- Controller->MaxBlocksPerCommand =
- ControllerInfo->MaximumDataTransferSizeInBlocks;
- Controller->ControllerScatterGatherLimit =
- ControllerInfo->MaximumScatterGatherEntries;
- Controller->DriverScatterGatherLimit =
- Controller->ControllerScatterGatherLimit;
- if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit)
- Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit;
- /*
- Initialize the Logical Device Information.
- */
- while (true)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo;
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
-
- if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber))
- break;
- LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber;
- if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) {
- DAC960_Error("DAC960: Logical Drive Number %d not supported\n",
- Controller, LogicalDeviceNumber);
- break;
- }
- if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) {
- DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n",
- Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes);
- LogicalDeviceNumber++;
- continue;
- }
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- DAC960_V2_LogicalDevice_Offline)
- Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- if (LogicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION");
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- LogicalDeviceNumber++;
- }
- return true;
-}
-
-
-/*
- DAC960_ReportControllerConfiguration reports the Configuration Information
- for Controller.
-*/
-
-static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T
- *Controller)
-{
- DAC960_Info("Configuring Mylex %s PCI RAID Controller\n",
- Controller, Controller->ModelName);
- DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n",
- Controller, Controller->FirmwareVersion,
- Controller->Channels, Controller->MemorySize);
- DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ",
- Controller, Controller->Bus,
- Controller->Device, Controller->Function);
- if (Controller->IO_Address == 0)
- DAC960_Info("Unassigned\n", Controller);
- else DAC960_Info("0x%X\n", Controller, Controller->IO_Address);
- DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n",
- Controller, Controller->PCI_Address,
- (unsigned long) Controller->BaseAddress,
- Controller->IRQ_Channel);
- DAC960_Info(" Controller Queue Depth: %d, "
- "Maximum Blocks per Command: %d\n",
- Controller, Controller->ControllerQueueDepth,
- Controller->MaxBlocksPerCommand);
- DAC960_Info(" Driver Queue Depth: %d, "
- "Scatter/Gather Limit: %d of %d Segments\n",
- Controller, Controller->DriverQueueDepth,
- Controller->DriverScatterGatherLimit,
- Controller->ControllerScatterGatherLimit);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, "
- "BIOS Geometry: %d/%d\n", Controller,
- Controller->V1.StripeSize,
- Controller->V1.SegmentSize,
- Controller->V1.GeometryTranslationHeads,
- Controller->V1.GeometryTranslationSectors);
- if (Controller->V1.SAFTE_EnclosureManagementEnabled)
- DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller);
- }
- return true;
-}
-
-
-/*
- DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI
- Inquiry Unit Serial Number information for each device connected to
- Controller.
-*/
-
-static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- struct dma_loaf local_dma;
-
- dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels];
- DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels];
-
- dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels];
-
- struct completion Completions[DAC960_V1_MaxChannels];
- unsigned long flags;
- int Channel, TargetID;
-
- if (!init_dma_loaf(Controller->PCIDevice, &local_dma,
- DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) +
- sizeof(DAC960_SCSI_Inquiry_T) +
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T))))
- return DAC960_Failure(Controller,
- "DMA ALLOCATION FAILED IN ReadDeviceConfiguration");
-
- for (Channel = 0; Channel < Controller->Channels; Channel++) {
- DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel);
- SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_T),
- SCSI_Inquiry_dma + Channel);
- SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- SCSI_NewInquiryUnitSerialNumberDMA + Channel);
- }
-
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- /*
- * For each channel, submit a probe for a device on that channel.
- * The timeout interval for a device that is present is 10 seconds.
- * With this approach, the timeout periods can elapse in parallel
- * on each channel.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- dma_addr_t DCDB_dma = DCDBs_dma[Channel];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- struct completion *Completion = &Completions[Channel];
-
- init_completion(Completion);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- Command->Completion = Completion;
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma;
- DCDB->Channel = Channel;
- DCDB->TargetID = TargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- /*
- * Wait for the problems submitted in the previous loop
- * to complete. On the probes that are successful,
- * get the serial number of the device that was found.
- */
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel];
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- SCSI_NewInquiryUnitSerialNumberDMA[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- SCSI_NewInquiryUnitSerialNumberCPU[Channel];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_Command_T *Command = Controller->Commands[Channel];
- DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel];
- struct completion *Completion = &Completions[Channel];
-
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- continue;
- } else
- memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T));
-
- /* Preserve Channel and TargetID values from the previous loop */
- Command->Completion = Completion;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_QueueCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- wait_for_completion(Completion);
-
- if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- }
- }
- free_dma_loaf(Controller->PCIDevice, &local_dma);
- return true;
-}
-
-
-/*
- DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information
- for DAC960 V2 Firmware Controllers by requesting the Physical Device
- Information and SCSI Inquiry Unit Serial Number information for each
- device connected to Controller.
-*/
-
-static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0;
- unsigned short PhysicalDeviceIndex = 0;
-
- while (true)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber;
-
- if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit))
- break;
-
- PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T),
- GFP_ATOMIC);
- if (PhysicalDeviceInfo == NULL)
- return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION");
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
-
- InquiryUnitSerialNumber = kmalloc(
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL) {
- kfree(PhysicalDeviceInfo);
- return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION");
- }
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
-
- Channel = NewPhysicalDeviceInfo->Channel;
- TargetID = NewPhysicalDeviceInfo->TargetID;
- LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit;
-
- /*
- Some devices do NOT have Unit Serial Numbers.
- This command fails for them. But, we still want to
- remember those devices are there. Construct a
- UnitSerialNumber structure for the failure case.
- */
- if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- PhysicalDeviceIndex++;
- LogicalUnit++;
- }
- return true;
-}
-
-
-/*
- DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and
- Product Serial Number fields of the Inquiry Standard Data and Inquiry
- Unit Serial Number structures.
-*/
-
-static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T
- *InquiryStandardData,
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber,
- unsigned char *Vendor,
- unsigned char *Model,
- unsigned char *Revision,
- unsigned char *SerialNumber)
-{
- int SerialNumberLength, i;
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) return;
- for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++)
- {
- unsigned char VendorCharacter =
- InquiryStandardData->VendorIdentification[i];
- Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~'
- ? VendorCharacter : ' ');
- }
- Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++)
- {
- unsigned char ModelCharacter =
- InquiryStandardData->ProductIdentification[i];
- Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~'
- ? ModelCharacter : ' ');
- }
- Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0';
- for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++)
- {
- unsigned char RevisionCharacter =
- InquiryStandardData->ProductRevisionLevel[i];
- Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~'
- ? RevisionCharacter : ' ');
- }
- Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0';
- if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return;
- SerialNumberLength = InquiryUnitSerialNumber->PageLength;
- if (SerialNumberLength >
- sizeof(InquiryUnitSerialNumber->ProductSerialNumber))
- SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber);
- for (i = 0; i < SerialNumberLength; i++)
- {
- unsigned char SerialNumberCharacter =
- InquiryUnitSerialNumber->ProductSerialNumber[i];
- SerialNumber[i] =
- (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~'
- ? SerialNumberCharacter : ' ');
- }
- SerialNumber[SerialNumberLength] = '\0';
-}
-
-
-/*
- DAC960_V1_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V1 Firmware Controllers.
-*/
-
-static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int LogicalDriveNumber, Channel, TargetID;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData[Channel][TargetID];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID];
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *ErrorEntry =
- &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber
- ->ProductSerialNumber)];
- if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller, Channel, TargetID, (TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType)
- {
- if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0)
- DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n",
- Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize,
- Controller->V1.DeviceResetCount[Channel][TargetID]);
- else
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (DeviceState->DeviceState == DAC960_V1_Device_Dead
- ? "Dead"
- : DeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "Write-Only"
- : DeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "Online" : "Standby"),
- DeviceState->DiskSize);
- }
- if (ErrorEntry->ParityErrorCount > 0 ||
- ErrorEntry->SoftErrorCount > 0 ||
- ErrorEntry->HardErrorCount > 0 ||
- ErrorEntry->MiscErrorCount > 0)
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- ErrorEntry->ParityErrorCount,
- ErrorEntry->SoftErrorCount,
- ErrorEntry->HardErrorCount,
- ErrorEntry->MiscErrorCount);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDriveInformation->RAIDLevel,
- (LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "Online"
- : LogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "Critical" : "Offline"),
- LogicalDriveInformation->LogicalDriveSize,
- (LogicalDriveInformation->WriteBack
- ? "Write Back" : "Write Thru"));
- }
- return true;
-}
-
-
-/*
- DAC960_V2_ReportDeviceConfiguration reports the Device Configuration
- Information for DAC960 V2 Firmware Controllers.
-*/
-
-static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T
- *Controller)
-{
- int PhysicalDeviceIndex, LogicalDriveNumber;
- DAC960_Info(" Physical Devices:\n", Controller);
- for (PhysicalDeviceIndex = 0;
- PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices;
- PhysicalDeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)];
- char Model[1+sizeof(InquiryStandardData->ProductIdentification)];
- char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)];
- char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber,
- Vendor, Model, Revision, SerialNumber);
- DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo->TargetID < 10 ? " " : ""),
- Vendor, Model, Revision);
- if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0)
- DAC960_Info(" %sAsynchronous\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""));
- else
- DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller,
- (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16
- ? "Wide " :""),
- (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers
- * PhysicalDeviceInfo->NegotiatedDataWidthBits/8));
- if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F)
- DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber);
- if (PhysicalDeviceInfo->PhysicalDeviceState ==
- DAC960_V2_Device_Unconfigured)
- continue;
- DAC960_Info(" Disk Status: %s, %u blocks\n", Controller,
- (PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "Online"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "Rebuild"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "Missing"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "Critical"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "Suspected-Dead"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "Commanded-Offline"
- : PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "Standby" : "Unknown"),
- PhysicalDeviceInfo->ConfigurableDeviceSize);
- if (PhysicalDeviceInfo->ParityErrors == 0 &&
- PhysicalDeviceInfo->SoftErrors == 0 &&
- PhysicalDeviceInfo->HardErrors == 0 &&
- PhysicalDeviceInfo->MiscellaneousErrors == 0 &&
- PhysicalDeviceInfo->CommandTimeouts == 0 &&
- PhysicalDeviceInfo->Retries == 0 &&
- PhysicalDeviceInfo->Aborts == 0 &&
- PhysicalDeviceInfo->PredictedFailuresDetected == 0)
- continue;
- DAC960_Info(" Errors - Parity: %d, Soft: %d, "
- "Hard: %d, Misc: %d\n", Controller,
- PhysicalDeviceInfo->ParityErrors,
- PhysicalDeviceInfo->SoftErrors,
- PhysicalDeviceInfo->HardErrors,
- PhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Info(" Timeouts: %d, Retries: %d, "
- "Aborts: %d, Predicted: %d\n", Controller,
- PhysicalDeviceInfo->CommandTimeouts,
- PhysicalDeviceInfo->Retries,
- PhysicalDeviceInfo->Aborts,
- PhysicalDeviceInfo->PredictedFailuresDetected);
- }
- DAC960_Info(" Logical Drives:\n", Controller);
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- static const unsigned char *ReadCacheStatus[] = {
- "Read Cache Disabled",
- "Read Cache Enabled",
- "Read Ahead Enabled",
- "Intelligent Read Ahead Enabled",
- "-", "-", "-", "-"
- };
- static const unsigned char *WriteCacheStatus[] = {
- "Write Cache Disabled",
- "Logical Device Read Only",
- "Write Cache Enabled",
- "Intelligent Write Cache Enabled",
- "-", "-", "-", "-"
- };
- unsigned char *GeometryTranslation;
- if (LogicalDeviceInfo == NULL) continue;
- switch (LogicalDeviceInfo->DriveGeometry)
- {
- case DAC960_V2_Geometry_128_32:
- GeometryTranslation = "128/32";
- break;
- case DAC960_V2_Geometry_255_63:
- GeometryTranslation = "255/63";
- break;
- default:
- GeometryTranslation = "Invalid";
- DAC960_Error("Illegal Logical Device Geometry %d\n",
- Controller, LogicalDeviceInfo->DriveGeometry);
- break;
- }
- DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n",
- Controller, Controller->ControllerNumber, LogicalDriveNumber,
- LogicalDeviceInfo->RAIDLevel,
- (LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "Online"
- : LogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "Critical" : "Offline"),
- LogicalDeviceInfo->ConfigurableDeviceSize);
- DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n",
- Controller,
- (LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Initialized" : "Uninitialized"),
- GeometryTranslation);
- if (LogicalDeviceInfo->StripeSize == 0)
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: N/A\n", Controller);
- else
- DAC960_Info(" Stripe Size: N/A, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- else
- {
- if (LogicalDeviceInfo->CacheLineSize == 0)
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: N/A\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2));
- else
- DAC960_Info(" Stripe Size: %dKB, "
- "Segment Size: %dKB\n", Controller,
- 1 << (LogicalDeviceInfo->StripeSize - 2),
- 1 << (LogicalDeviceInfo->CacheLineSize - 2));
- }
- DAC960_Info(" %s, %s\n", Controller,
- ReadCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.ReadCache],
- WriteCacheStatus[
- LogicalDeviceInfo->LogicalDeviceControl.WriteCache]);
- if (LogicalDeviceInfo->SoftErrors > 0 ||
- LogicalDeviceInfo->CommandsFailed > 0 ||
- LogicalDeviceInfo->DeferredWriteErrors)
- DAC960_Info(" Errors - Soft: %d, Failed: %d, "
- "Deferred Write: %d\n", Controller,
- LogicalDeviceInfo->SoftErrors,
- LogicalDeviceInfo->CommandsFailed,
- LogicalDeviceInfo->DeferredWriteErrors);
-
- }
- return true;
-}
-
-/*
- DAC960_RegisterBlockDevice registers the Block Device structures
- associated with Controller.
-*/
-
-static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int n;
-
- /*
- Register the Block Device Major Number for this DAC960 Controller.
- */
- if (register_blkdev(MajorNumber, "dac960") < 0)
- return false;
-
- for (n = 0; n < DAC960_MaxLogicalDrives; n++) {
- struct gendisk *disk = Controller->disks[n];
- struct request_queue *RequestQueue;
-
- /* for now, let all request queues share controller's lock */
- RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock);
- if (!RequestQueue) {
- printk("DAC960: failure to allocate request queue\n");
- continue;
- }
- Controller->RequestQueue[n] = RequestQueue;
- RequestQueue->queuedata = Controller;
- blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
- blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
- disk->queue = RequestQueue;
- sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n);
- disk->major = MajorNumber;
- disk->first_minor = n << DAC960_MaxPartitionsBits;
- disk->fops = &DAC960_BlockDeviceOperations;
- }
- /*
- Indicate the Block Device Registration completed successfully,
- */
- return true;
-}
-
-
-/*
- DAC960_UnregisterBlockDevice unregisters the Block Device structures
- associated with Controller.
-*/
-
-static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller)
-{
- int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber;
- int disk;
-
- /* does order matter when deleting gendisk and cleanup in request queue? */
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- del_gendisk(Controller->disks[disk]);
- blk_cleanup_queue(Controller->RequestQueue[disk]);
- Controller->RequestQueue[disk] = NULL;
- }
-
- /*
- Unregister the Block Device Major Number for this DAC960 Controller.
- */
- unregister_blkdev(MajorNumber, "dac960");
-}
-
-/*
- DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk
- Information Partition Sector Counts and Block Sizes.
-*/
-
-static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller)
-{
- int disk;
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++)
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
-}
-
-/*
- DAC960_ReportErrorStatus reports Controller BIOS Messages passed through
- the Error Status Register when the driver performs the BIOS handshaking.
- It returns true for fatal errors and false otherwise.
-*/
-
-static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller,
- unsigned char ErrorStatus,
- unsigned char Parameter0,
- unsigned char Parameter1)
-{
- switch (ErrorStatus)
- {
- case 0x00:
- DAC960_Notice("Physical Device %d:%d Not Responding\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0x08:
- if (Controller->DriveSpinUpMessageDisplayed) break;
- DAC960_Notice("Spinning Up Drives\n", Controller);
- Controller->DriveSpinUpMessageDisplayed = true;
- break;
- case 0x30:
- DAC960_Notice("Configuration Checksum Error\n", Controller);
- break;
- case 0x60:
- DAC960_Notice("Mirror Race Recovery Failed\n", Controller);
- break;
- case 0x70:
- DAC960_Notice("Mirror Race Recovery In Progress\n", Controller);
- break;
- case 0x90:
- DAC960_Notice("Physical Device %d:%d COD Mismatch\n",
- Controller, Parameter1, Parameter0);
- break;
- case 0xA0:
- DAC960_Notice("Logical Drive Installation Aborted\n", Controller);
- break;
- case 0xB0:
- DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller);
- break;
- case 0xD0:
- DAC960_Notice("New Controller Configuration Found\n", Controller);
- break;
- case 0xF0:
- DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller);
- return true;
- default:
- DAC960_Error("Unknown Initialization Error %02X for Controller at\n",
- Controller, ErrorStatus);
- return true;
- }
- return false;
-}
-
-
-/*
- * DAC960_DetectCleanup releases the resources that were allocated
- * during DAC960_DetectController(). DAC960_DetectController can
- * has several internal failure points, so not ALL resources may
- * have been allocated. It's important to free only
- * resources that HAVE been allocated. The code below always
- * tests that the resource has been allocated before attempting to
- * free it.
- */
-static void DAC960_DetectCleanup(DAC960_Controller_T *Controller)
-{
- int i;
-
- /* Free the memory mailbox, status, and related structures */
- free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages);
- if (Controller->MemoryMappedAddress) {
- switch(Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_PD_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- case DAC960_P_Controller:
- DAC960_PD_DisableInterrupts(Controller->BaseAddress);
- break;
- }
- iounmap(Controller->MemoryMappedAddress);
- }
- if (Controller->IRQ_Channel)
- free_irq(Controller->IRQ_Channel, Controller);
- if (Controller->IO_Address)
- release_region(Controller->IO_Address, 0x80);
- pci_disable_device(Controller->PCIDevice);
- for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++)
- put_disk(Controller->disks[i]);
- DAC960_Controllers[Controller->ControllerNumber] = NULL;
- kfree(Controller);
-}
-
-
-/*
- DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID
- PCI RAID Controllers by interrogating the PCI Configuration Space for
- Controller Type.
-*/
-
-static DAC960_Controller_T *
-DAC960_DetectController(struct pci_dev *PCI_Device,
- const struct pci_device_id *entry)
-{
- struct DAC960_privdata *privdata =
- (struct DAC960_privdata *)entry->driver_data;
- irq_handler_t InterruptHandler = privdata->InterruptHandler;
- unsigned int MemoryWindowSize = privdata->MemoryWindowSize;
- DAC960_Controller_T *Controller = NULL;
- unsigned char DeviceFunction = PCI_Device->devfn;
- unsigned char ErrorStatus, Parameter0, Parameter1;
- unsigned int IRQ_Channel;
- void __iomem *BaseAddress;
- int i;
-
- Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC);
- if (Controller == NULL) {
- DAC960_Error("Unable to allocate Controller structure for "
- "Controller at\n", NULL);
- return NULL;
- }
- Controller->ControllerNumber = DAC960_ControllerCount;
- DAC960_Controllers[DAC960_ControllerCount++] = Controller;
- Controller->Bus = PCI_Device->bus->number;
- Controller->FirmwareType = privdata->FirmwareType;
- Controller->HardwareType = privdata->HardwareType;
- Controller->Device = DeviceFunction >> 3;
- Controller->Function = DeviceFunction & 0x7;
- Controller->PCIDevice = PCI_Device;
- strcpy(Controller->FullModelName, "DAC960");
-
- if (pci_enable_device(PCI_Device))
- goto Failure;
-
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_BA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LP_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_LA_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PG_Controller:
- Controller->PCI_Address = pci_resource_start(PCI_Device, 0);
- break;
- case DAC960_PD_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- case DAC960_P_Controller:
- Controller->IO_Address = pci_resource_start(PCI_Device, 0);
- Controller->PCI_Address = pci_resource_start(PCI_Device, 1);
- break;
- }
-
- pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber));
- for (i = 0; i < DAC960_MaxLogicalDrives; i++) {
- Controller->disks[i] = alloc_disk(1<<DAC960_MaxPartitionsBits);
- if (!Controller->disks[i])
- goto Failure;
- Controller->disks[i]->private_data = (void *)((long)i);
- }
- init_waitqueue_head(&Controller->CommandWaitQueue);
- init_waitqueue_head(&Controller->HealthStatusWaitQueue);
- spin_lock_init(&Controller->queue_lock);
- DAC960_AnnounceDriver(Controller);
- /*
- Map the Controller Register Window.
- */
- if (MemoryWindowSize < PAGE_SIZE)
- MemoryWindowSize = PAGE_SIZE;
- Controller->MemoryMappedAddress =
- ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize);
- Controller->BaseAddress =
- Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK);
- if (Controller->MemoryMappedAddress == NULL)
- {
- DAC960_Error("Unable to map Controller Register Window for "
- "Controller at\n", Controller);
- goto Failure;
- }
- BaseAddress = Controller->BaseAddress;
- switch (Controller->HardwareType)
- {
- case DAC960_GEM_Controller:
- DAC960_GEM_DisableInterrupts(BaseAddress);
- DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_GEM_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_GEM_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_GEM_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_BA_Controller:
- DAC960_BA_DisableInterrupts(BaseAddress);
- DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_BA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_BA_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_BA_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LP_Controller:
- DAC960_LP_DisableInterrupts(BaseAddress);
- DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LP_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V2_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LP_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_LP_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V2_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V2_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V2_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V2_QueueReadWriteCommand;
- break;
- case DAC960_LA_Controller:
- DAC960_LA_DisableInterrupts(BaseAddress);
- DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_LA_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_LA_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_LA_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PG_Controller:
- DAC960_PG_DisableInterrupts(BaseAddress);
- DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PG_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to Enable Memory Mailbox Interface "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PG_EnableInterrupts(BaseAddress);
- if (Controller->V1.DualModeMemoryMailboxInterface)
- Controller->QueueCommand = DAC960_PG_QueueCommandDualMode;
- else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_PD_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)) {
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory "
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_PD_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- case DAC960_P_Controller:
- if (!request_region(Controller->IO_Address, 0x80,
- Controller->FullModelName)){
- DAC960_Error("IO port 0x%lx busy for Controller at\n",
- Controller, Controller->IO_Address);
- goto Failure;
- }
- DAC960_PD_DisableInterrupts(BaseAddress);
- DAC960_PD_AcknowledgeStatus(BaseAddress);
- udelay(1000);
- while (DAC960_PD_InitializationInProgressP(BaseAddress))
- {
- if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus,
- &Parameter0, &Parameter1) &&
- DAC960_ReportErrorStatus(Controller, ErrorStatus,
- Parameter0, Parameter1))
- goto Failure;
- udelay(10);
- }
- if (!DAC960_V1_EnableMemoryMailboxInterface(Controller))
- {
- DAC960_Error("Unable to allocate DMA mapped memory"
- "for Controller at\n", Controller);
- goto Failure;
- }
- DAC960_PD_EnableInterrupts(BaseAddress);
- Controller->QueueCommand = DAC960_P_QueueCommand;
- Controller->ReadControllerConfiguration =
- DAC960_V1_ReadControllerConfiguration;
- Controller->ReadDeviceConfiguration =
- DAC960_V1_ReadDeviceConfiguration;
- Controller->ReportDeviceConfiguration =
- DAC960_V1_ReportDeviceConfiguration;
- Controller->QueueReadWriteCommand =
- DAC960_V1_QueueReadWriteCommand;
- break;
- }
- /*
- Acquire shared access to the IRQ Channel.
- */
- IRQ_Channel = PCI_Device->irq;
- if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED,
- Controller->FullModelName, Controller) < 0)
- {
- DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n",
- Controller, Controller->IRQ_Channel);
- goto Failure;
- }
- Controller->IRQ_Channel = IRQ_Channel;
- Controller->InitialCommand.CommandIdentifier = 1;
- Controller->InitialCommand.Controller = Controller;
- Controller->Commands[0] = &Controller->InitialCommand;
- Controller->FreeCommands = &Controller->InitialCommand;
- return Controller;
-
-Failure:
- if (Controller->IO_Address == 0)
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A "
- "PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->PCI_Address);
- else
- DAC960_Error("PCI Bus %d Device %d Function %d I/O Address "
- "0x%X PCI Address 0x%X\n", Controller,
- Controller->Bus, Controller->Device,
- Controller->Function, Controller->IO_Address,
- Controller->PCI_Address);
- DAC960_DetectCleanup(Controller);
- DAC960_ControllerCount--;
- return NULL;
-}
-
-/*
- DAC960_InitializeController initializes Controller.
-*/
-
-static bool
-DAC960_InitializeController(DAC960_Controller_T *Controller)
-{
- if (DAC960_ReadControllerConfiguration(Controller) &&
- DAC960_ReportControllerConfiguration(Controller) &&
- DAC960_CreateAuxiliaryStructures(Controller) &&
- DAC960_ReadDeviceConfiguration(Controller) &&
- DAC960_ReportDeviceConfiguration(Controller) &&
- DAC960_RegisterBlockDevice(Controller))
- {
- /*
- Initialize the Monitoring Timer.
- */
- timer_setup(&Controller->MonitoringTimer,
- DAC960_MonitoringTimerFunction, 0);
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- Controller->ControllerInitialized = true;
- return true;
- }
- return false;
-}
-
-
-/*
- DAC960_FinalizeController finalizes Controller.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerInitialized)
- {
- unsigned long flags;
-
- /*
- * Acquiring and releasing lock here eliminates
- * a very low probability race.
- *
- * The code below allocates controller command structures
- * from the free list without holding the controller lock.
- * This is safe assuming there is no other activity on
- * the controller at the time.
- *
- * But, there might be a monitoring command still
- * in progress. Setting the Shutdown flag while holding
- * the lock ensures that there is no monitoring command
- * in the interrupt handler currently, and any monitoring
- * commands that complete from this time on will NOT return
- * their command structure to the free list.
- */
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- Controller->ShutdownMonitoringTimer = 1;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
-
- del_timer_sync(&Controller->MonitoringTimer);
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0);
- DAC960_Notice("done\n", Controller);
-
- if (Controller->HardwareType == DAC960_PD_Controller)
- release_region(Controller->IO_Address, 0x80);
- }
- else
- {
- DAC960_Notice("Flushing Cache...", Controller);
- DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice,
- DAC960_V2_RAID_Controller);
- DAC960_Notice("done\n", Controller);
- }
- }
- DAC960_UnregisterBlockDevice(Controller);
- DAC960_DestroyAuxiliaryStructures(Controller);
- DAC960_DestroyProcEntries(Controller);
- DAC960_DetectCleanup(Controller);
-}
-
-
-/*
- DAC960_Probe verifies controller's existence and
- initializes the DAC960 Driver for that controller.
-*/
-
-static int
-DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry)
-{
- int disk;
- DAC960_Controller_T *Controller;
-
- if (DAC960_ControllerCount == DAC960_MaxControllers)
- {
- DAC960_Error("More than %d DAC960 Controllers detected - "
- "ignoring from Controller at\n",
- NULL, DAC960_MaxControllers);
- return -ENODEV;
- }
-
- Controller = DAC960_DetectController(dev, entry);
- if (!Controller)
- return -ENODEV;
-
- if (!DAC960_InitializeController(Controller)) {
- DAC960_FinalizeController(Controller);
- return -ENODEV;
- }
-
- for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) {
- set_capacity(Controller->disks[disk], disk_size(Controller, disk));
- add_disk(Controller->disks[disk]);
- }
- DAC960_CreateProcEntries(Controller);
- return 0;
-}
-
-
-/*
- DAC960_Finalize finalizes the DAC960 Driver.
-*/
-
-static void DAC960_Remove(struct pci_dev *PCI_Device)
-{
- int Controller_Number = (long)pci_get_drvdata(PCI_Device);
- DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number];
- if (Controller != NULL)
- DAC960_FinalizeController(Controller);
-}
-
-
-/*
- DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList =
- Command->V1.ScatterGatherList;
- struct scatterlist *ScatterList = Command->V1.ScatterList;
-
- DAC960_V1_ClearCommand(Command);
-
- if (Command->SegmentCount == 1)
- {
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- }
- else
- {
- int i;
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather;
- else
- CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather;
-
- CommandMailbox->Type5.LD.TransferLength = Command->BlockCount;
- CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber;
- CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber;
- CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA;
-
- CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress32_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount32_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for
- DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- struct scatterlist *ScatterList = Command->V2.ScatterList;
-
- DAC960_V2_ClearCommand(Command);
-
- CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10;
- CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE);
- CommandMailbox->SCSI_10.DataTransferSize =
- Command->BlockCount << DAC960_BlockSizeBits;
- CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA;
- CommandMailbox->SCSI_10.PhysicalDevice =
- Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber];
- CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T);
- CommandMailbox->SCSI_10.CDBLength = 10;
- CommandMailbox->SCSI_10.SCSI_CDB[0] =
- (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A);
- CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24;
- CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16;
- CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber;
- CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8;
- CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount;
-
- if (Command->SegmentCount == 1)
- {
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->SCSI_10.DataTransferSize;
- }
- else
- {
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- int i;
-
- if (Command->SegmentCount > 2)
- {
- ScatterGatherList = Command->V2.ScatterGatherList;
- CommandMailbox->SCSI_10.CommandControlBits
- .AdditionalScatterGatherListMemory = true;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount;
- CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ExtendedScatterGather.ScatterGatherList0Address =
- Command->V2.ScatterGatherListDMA;
- }
- else
- ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress
- .ScatterGatherSegments;
-
- for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) {
- ScatterGatherList->SegmentDataPointer =
- (DAC960_BusAddress64_T)sg_dma_address(ScatterList);
- ScatterGatherList->SegmentByteCount =
- (DAC960_ByteCount64_T)sg_dma_len(ScatterList);
- }
- }
- DAC960_QueueCommand(Command);
-}
-
-
-static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q)
-{
- struct request *Request;
- DAC960_Command_T *Command;
-
- while(1) {
- Request = blk_peek_request(req_q);
- if (!Request)
- return 1;
-
- Command = DAC960_AllocateCommand(Controller);
- if (Command == NULL)
- return 0;
-
- if (rq_data_dir(Request) == READ) {
- Command->DmaDirection = PCI_DMA_FROMDEVICE;
- Command->CommandType = DAC960_ReadCommand;
- } else {
- Command->DmaDirection = PCI_DMA_TODEVICE;
- Command->CommandType = DAC960_WriteCommand;
- }
- Command->Completion = Request->end_io_data;
- Command->LogicalDriveNumber = (long)Request->rq_disk->private_data;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = blk_rq_sectors(Request);
- Command->Request = Request;
- blk_start_request(Request);
- Command->SegmentCount = blk_rq_map_sg(req_q,
- Command->Request, Command->cmd_sglist);
- /* pci_map_sg MAY change the value of SegCount */
- Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- DAC960_QueueReadWriteCommand(Command);
- }
-}
-
-/*
- DAC960_ProcessRequest attempts to remove one I/O Request from Controller's
- I/O Request Queue and queues it to the Controller. WaitForCommand is true if
- this function should wait for a Command to become available if necessary.
- This function returns true if an I/O Request was queued and false otherwise.
-*/
-static void DAC960_ProcessRequest(DAC960_Controller_T *controller)
-{
- int i;
-
- if (!controller->ControllerInitialized)
- return;
-
- /* Do this better later! */
- for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-
- if (controller->req_q_index == 0)
- return;
-
- for (i = 0; i < controller->req_q_index; i++) {
- struct request_queue *req_q = controller->RequestQueue[i];
-
- if (req_q == NULL)
- continue;
-
- if (!DAC960_process_queue(controller, req_q)) {
- controller->req_q_index = i;
- return;
- }
- }
-}
-
-
-/*
- DAC960_queue_partial_rw extracts one bio from the request already
- associated with argument command, and construct a new command block to retry I/O
- only on that bio. Queue that command to the controller.
-
- This function re-uses a previously-allocated Command,
- there is no failure mode from trying to allocate a command.
-*/
-
-static void DAC960_queue_partial_rw(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- struct request *Request = Command->Request;
- struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber];
-
- if (Command->DmaDirection == PCI_DMA_FROMDEVICE)
- Command->CommandType = DAC960_ReadRetryCommand;
- else
- Command->CommandType = DAC960_WriteRetryCommand;
-
- /*
- * We could be more efficient with these mapping requests
- * and map only the portions that we need. But since this
- * code should almost never be called, just go with a
- * simple coding.
- */
- (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist);
-
- (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection);
- /*
- * Resubmitting the request sector at a time is really tedious.
- * But, this should almost never happen. So, we're willing to pay
- * this price so that in the end, as much of the transfer is completed
- * successfully as possible.
- */
- Command->SegmentCount = 1;
- Command->BlockNumber = blk_rq_pos(Request);
- Command->BlockCount = 1;
- DAC960_QueueReadWriteCommand(Command);
- return;
-}
-
-/*
- DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers.
-*/
-
-static void DAC960_RequestFunction(struct request_queue *RequestQueue)
-{
- DAC960_ProcessRequest(RequestQueue->queuedata);
-}
-
-/*
- DAC960_ProcessCompletedBuffer performs completion processing for an
- individual Buffer.
-*/
-
-static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command,
- bool SuccessfulIO)
-{
- struct request *Request = Command->Request;
- blk_status_t Error = SuccessfulIO ? BLK_STS_OK : BLK_STS_IOERR;
-
- pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist,
- Command->SegmentCount, Command->DmaDirection);
-
- if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) {
- if (Command->Completion) {
- complete(Command->Completion);
- Command->Completion = NULL;
- }
- return true;
- }
- return false;
-}
-
-/*
- DAC960_V1_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_IrrecoverableDataError:
- DAC960_Error("Irrecoverable Data Error on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_LogicalDriveNonexistentOrOffline:
- DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n",
- Controller, CommandName);
- break;
- case DAC960_V1_AccessBeyondEndOfLogicalDrive:
- DAC960_Error("Attempt to Access Beyond End of Logical Drive "
- "on %s:\n", Controller, CommandName);
- break;
- case DAC960_V1_BadDataEncountered:
- DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName);
- break;
- default:
- DAC960_Error("Unexpected Error Status %04X on %s:\n",
- Controller, Command->V1.CommandStatus, CommandName);
- break;
- }
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V1_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- Command->V1.CommandMailbox.Common.CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V1_IrrecoverableDataError;
-#endif
-
- if (CommandStatus == DAC960_V1_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (CommandStatus == DAC960_V1_IrrecoverableDataError ||
- CommandStatus == DAC960_V1_BadDataEncountered)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
-
- if (!DAC960_ProcessCompletedRequest(Command, false))
- BUG();
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V1_NormalCompletion) {
- normal_completion = false;
- if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline)
- DAC960_V1_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V1 error retry failure test\n");
- normal_completion = false;
- DAC960_V1_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
-
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (CommandOpcode == DAC960_V1_Enquiry)
- {
- DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry;
- unsigned int OldCriticalLogicalDriveCount =
- OldEnquiry->CriticalLogicalDriveCount;
- unsigned int NewCriticalLogicalDriveCount =
- NewEnquiry->CriticalLogicalDriveCount;
- if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = Controller->LogicalDriveCount - 1;
- while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount)
- {
- int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1;
- while (++LogicalDriveNumber < Controller->LogicalDriveCount)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- if (NewEnquiry->StatusFlags.DeferredWriteError !=
- OldEnquiry->StatusFlags.DeferredWriteError)
- DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller,
- (NewEnquiry->StatusFlags.DeferredWriteError
- ? "TRUE" : "FALSE"));
- if ((NewCriticalLogicalDriveCount > 0 ||
- NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) ||
- (NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount !=
- OldEnquiry->OfflineLogicalDriveCount) ||
- (NewEnquiry->DeadDriveCount > 0 ||
- NewEnquiry->DeadDriveCount !=
- OldEnquiry->DeadDriveCount) ||
- (NewEnquiry->EventLogSequenceNumber !=
- OldEnquiry->EventLogSequenceNumber) ||
- Controller->MonitoringTimerCount == 0 ||
- time_after_eq(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- Controller->V1.NeedLogicalDriveInformation = true;
- Controller->V1.NewEventLogSequenceNumber =
- NewEnquiry->EventLogSequenceNumber;
- Controller->V1.NeedErrorTableInformation = true;
- Controller->V1.NeedDeviceStateInformation = true;
- Controller->V1.StartDeviceStateScan = true;
- Controller->V1.NeedBackgroundInitializationStatus =
- Controller->V1.BackgroundInitializationStatusSupported;
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress ||
- OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress)
- {
- Controller->V1.NeedRebuildProgress = true;
- Controller->V1.RebuildProgressFirst =
- (NewEnquiry->CriticalLogicalDriveCount <
- OldEnquiry->CriticalLogicalDriveCount);
- }
- if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress)
- switch (NewEnquiry->RebuildFlag)
- {
- case DAC960_V1_NoStandbyRebuildOrCheckInProgress:
- DAC960_Progress("Consistency Check Completed Successfully\n",
- Controller);
- break;
- case DAC960_V1_StandbyRebuildInProgress:
- case DAC960_V1_BackgroundRebuildInProgress:
- break;
- case DAC960_V1_BackgroundCheckInProgress:
- Controller->V1.NeedConsistencyCheckProgress = true;
- break;
- case DAC960_V1_StandbyRebuildCompletedWithError:
- DAC960_Progress("Consistency Check Completed with Error\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Physical Device Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed:
- DAC960_Progress("Consistency Check Failed - "
- "Logical Drive Failed\n", Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses:
- DAC960_Progress("Consistency Check Failed - Other Causes\n",
- Controller);
- break;
- case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated:
- DAC960_Progress("Consistency Check Successfully Terminated\n",
- Controller);
- break;
- }
- else if (NewEnquiry->RebuildFlag
- == DAC960_V1_BackgroundCheckInProgress)
- Controller->V1.NeedConsistencyCheckProgress = true;
- Controller->MonitoringAlertMode =
- (NewEnquiry->CriticalLogicalDriveCount > 0 ||
- NewEnquiry->OfflineLogicalDriveCount > 0 ||
- NewEnquiry->DeadDriveCount > 0);
- if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress)
- {
- Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag;
- Controller->V1.RebuildFlagPending = true;
- }
- memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry,
- sizeof(DAC960_V1_Enquiry_T));
- }
- else if (CommandOpcode == DAC960_V1_PerformEventLogOperation)
- {
- static char
- *DAC960_EventMessages[] =
- { "killed because write recovery failed",
- "killed because of SCSI bus reset failure",
- "killed because of double check condition",
- "killed because it was removed",
- "killed because of gross error on SCSI chip",
- "killed because of bad tag returned from drive",
- "killed because of timeout on SCSI command",
- "killed because of reset SCSI command issued from system",
- "killed because busy or parity error count exceeded limit",
- "killed because of 'kill drive' command from system",
- "killed because of selection timeout",
- "killed due to SCSI phase sequence error",
- "killed due to unknown status" };
- DAC960_V1_EventLogEntry_T *EventLogEntry =
- Controller->V1.EventLogEntry;
- if (EventLogEntry->SequenceNumber ==
- Controller->V1.OldEventLogSequenceNumber)
- {
- unsigned char SenseKey = EventLogEntry->SenseKey;
- unsigned char AdditionalSenseCode =
- EventLogEntry->AdditionalSenseCode;
- unsigned char AdditionalSenseCodeQualifier =
- EventLogEntry->AdditionalSenseCodeQualifier;
- if (SenseKey == DAC960_SenseKey_VendorSpecific &&
- AdditionalSenseCode == 0x80 &&
- AdditionalSenseCodeQualifier <
- ARRAY_SIZE(DAC960_EventMessages))
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- DAC960_EventMessages[
- AdditionalSenseCodeQualifier]);
- else if (SenseKey == DAC960_SenseKey_UnitAttention &&
- AdditionalSenseCode == 0x29)
- {
- if (Controller->MonitoringTimerCount > 0)
- Controller->V1.DeviceResetCount[EventLogEntry->Channel]
- [EventLogEntry->TargetID]++;
- }
- else if (!(SenseKey == DAC960_SenseKey_NoSense ||
- (SenseKey == DAC960_SenseKey_NotReady &&
- AdditionalSenseCode == 0x04 &&
- (AdditionalSenseCodeQualifier == 0x01 ||
- AdditionalSenseCodeQualifier == 0x02))))
- {
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- SenseKey,
- AdditionalSenseCode,
- AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Error Log: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- EventLogEntry->Channel,
- EventLogEntry->TargetID,
- EventLogEntry->Information[0],
- EventLogEntry->Information[1],
- EventLogEntry->Information[2],
- EventLogEntry->Information[3],
- EventLogEntry->CommandSpecificInformation[0],
- EventLogEntry->CommandSpecificInformation[1],
- EventLogEntry->CommandSpecificInformation[2],
- EventLogEntry->CommandSpecificInformation[3]);
- }
- }
- Controller->V1.OldEventLogSequenceNumber++;
- }
- else if (CommandOpcode == DAC960_V1_GetErrorTable)
- {
- DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable;
- int Channel, TargetID;
- for (Channel = 0; Channel < Controller->Channels; Channel++)
- for (TargetID = 0; TargetID < Controller->Targets; TargetID++)
- {
- DAC960_V1_ErrorTableEntry_T *NewErrorEntry =
- &NewErrorTable->ErrorTableEntries[Channel][TargetID];
- DAC960_V1_ErrorTableEntry_T *OldErrorEntry =
- &OldErrorTable->ErrorTableEntries[Channel][TargetID];
- if ((NewErrorEntry->ParityErrorCount !=
- OldErrorEntry->ParityErrorCount) ||
- (NewErrorEntry->SoftErrorCount !=
- OldErrorEntry->SoftErrorCount) ||
- (NewErrorEntry->HardErrorCount !=
- OldErrorEntry->HardErrorCount) ||
- (NewErrorEntry->MiscErrorCount !=
- OldErrorEntry->MiscErrorCount))
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller, Channel, TargetID,
- NewErrorEntry->ParityErrorCount,
- NewErrorEntry->SoftErrorCount,
- NewErrorEntry->HardErrorCount,
- NewErrorEntry->MiscErrorCount);
- }
- memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable,
- sizeof(DAC960_V1_ErrorTable_T));
- }
- else if (CommandOpcode == DAC960_V1_GetDeviceState)
- {
- DAC960_V1_DeviceState_T *OldDeviceState =
- &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- DAC960_V1_DeviceState_T *NewDeviceState =
- Controller->V1.NewDeviceState;
- if (NewDeviceState->DeviceState != OldDeviceState->DeviceState)
- DAC960_Critical("Physical Device %d:%d is now %s\n", Controller,
- Controller->V1.DeviceStateChannel,
- Controller->V1.DeviceStateTargetID,
- (NewDeviceState->DeviceState
- == DAC960_V1_Device_Dead
- ? "DEAD"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_WriteOnly
- ? "WRITE-ONLY"
- : NewDeviceState->DeviceState
- == DAC960_V1_Device_Online
- ? "ONLINE" : "STANDBY"));
- if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead &&
- NewDeviceState->DeviceState != DAC960_V1_Device_Dead)
- {
- Controller->V1.NeedDeviceInquiryInformation = true;
- Controller->V1.NeedDeviceSerialNumberInformation = true;
- Controller->V1.DeviceResetCount
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID] = 0;
- }
- memcpy(OldDeviceState, NewDeviceState,
- sizeof(DAC960_V1_DeviceState_T));
- }
- else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < Controller->LogicalDriveCount;
- LogicalDriveNumber++)
- {
- DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation =
- &Controller->V1.LogicalDriveInformation[LogicalDriveNumber];
- DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation =
- &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber];
- if (NewLogicalDriveInformation->LogicalDriveState !=
- OldLogicalDriveInformation->LogicalDriveState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Online
- ? "ONLINE"
- : NewLogicalDriveInformation->LogicalDriveState
- == DAC960_V1_LogicalDrive_Critical
- ? "CRITICAL" : "OFFLINE"));
- if (NewLogicalDriveInformation->WriteBack !=
- OldLogicalDriveInformation->WriteBack)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (NewLogicalDriveInformation->WriteBack
- ? "WRITE BACK" : "WRITE THRU"));
- }
- memcpy(&Controller->V1.LogicalDriveInformation,
- Controller->V1.NewLogicalDriveInformation,
- sizeof(DAC960_V1_LogicalDriveInformationArray_T));
- }
- else if (CommandOpcode == DAC960_V1_GetRebuildProgress)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress &&
- Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion)
- CommandStatus = DAC960_V1_RebuildSuccessful;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Rebuild in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_RebuildFailed_LogicalDriveFailure:
- DAC960_Progress("Rebuild Failed due to "
- "Logical Drive Failure\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_BadBlocksOnOther:
- DAC960_Progress("Rebuild Failed due to "
- "Bad Blocks on Other Drives\n", Controller);
- break;
- case DAC960_V1_RebuildFailed_NewDriveFailed:
- DAC960_Progress("Rebuild Failed due to "
- "Failure of Drive Being Rebuilt\n", Controller);
- break;
- case DAC960_V1_NoRebuildOrCheckInProgress:
- break;
- case DAC960_V1_RebuildSuccessful:
- DAC960_Progress("Rebuild Completed Successfully\n", Controller);
- break;
- case DAC960_V1_RebuildSuccessfullyTerminated:
- DAC960_Progress("Rebuild Successfully Terminated\n", Controller);
- break;
- }
- Controller->V1.LastRebuildStatus = CommandStatus;
- if (CommandType != DAC960_MonitoringCommand &&
- Controller->V1.RebuildStatusPending)
- {
- Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus;
- Controller->V1.RebuildStatusPending = false;
- }
- else if (CommandType == DAC960_MonitoringCommand &&
- CommandStatus != DAC960_V1_NormalCompletion &&
- CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress)
- {
- Controller->V1.PendingRebuildStatus = CommandStatus;
- Controller->V1.RebuildStatusPending = true;
- }
- }
- else if (CommandOpcode == DAC960_V1_RebuildStat)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.RebuildProgress->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.RebuildProgress->LogicalDriveSize;
- unsigned int BlocksCompleted =
- LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks;
- if (CommandStatus == DAC960_V1_NormalCompletion)
- {
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Consistency Check in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- }
- }
- else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl)
- {
- unsigned int LogicalDriveNumber =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber;
- unsigned int LogicalDriveSize =
- Controller->V1.BackgroundInitializationStatus->LogicalDriveSize;
- unsigned int BlocksCompleted =
- Controller->V1.BackgroundInitializationStatus->BlocksCompleted;
- switch (CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- switch (Controller->V1.BackgroundInitializationStatus->Status)
- {
- case DAC960_V1_BackgroundInitializationInvalid:
- break;
- case DAC960_V1_BackgroundInitializationStarted:
- DAC960_Progress("Background Initialization Started\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationInProgress:
- if (BlocksCompleted ==
- Controller->V1.LastBackgroundInitializationStatus.
- BlocksCompleted &&
- LogicalDriveNumber ==
- Controller->V1.LastBackgroundInitializationStatus.
- LogicalDriveNumber)
- break;
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("Background Initialization in Progress: "
- "Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (100 * (BlocksCompleted >> 7))
- / (LogicalDriveSize >> 7));
- Controller->EphemeralProgressMessage = false;
- break;
- case DAC960_V1_BackgroundInitializationSuspended:
- DAC960_Progress("Background Initialization Suspended\n",
- Controller);
- break;
- case DAC960_V1_BackgroundInitializationCancelled:
- DAC960_Progress("Background Initialization Cancelled\n",
- Controller);
- break;
- }
- memcpy(&Controller->V1.LastBackgroundInitializationStatus,
- Controller->V1.BackgroundInitializationStatus,
- sizeof(DAC960_V1_BackgroundInitializationStatus_T));
- break;
- case DAC960_V1_BackgroundInitSuccessful:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization "
- "Completed Successfully\n", Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_BackgroundInitAborted:
- if (Controller->V1.BackgroundInitializationStatus->Status ==
- DAC960_V1_BackgroundInitializationInProgress)
- DAC960_Progress("Background Initialization Aborted\n",
- Controller);
- Controller->V1.BackgroundInitializationStatus->Status =
- DAC960_V1_BackgroundInitializationInvalid;
- break;
- case DAC960_V1_NoBackgroundInitInProgress:
- break;
- }
- }
- else if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- This is a bit ugly.
-
- The InquiryStandardData and
- the InquiryUntitSerialNumber information
- retrieval operations BOTH use the DAC960_V1_DCDB
- commands. the test above can't distinguish between
- these two cases.
-
- Instead, we rely on the order of code later in this
- function to ensure that DeviceInquiryInformation commands
- are submitted before DeviceSerialNumber commands.
- */
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_SCSI_Inquiry_T *InquiryStandardData =
- &Controller->V1.InquiryStandardData
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryStandardData, 0,
- sizeof(DAC960_SCSI_Inquiry_T));
- InquiryStandardData->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryStandardData,
- Controller->V1.NewInquiryStandardData,
- sizeof(DAC960_SCSI_Inquiry_T));
- Controller->V1.NeedDeviceInquiryInformation = false;
- }
- else if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- &Controller->V1.InquiryUnitSerialNumber
- [Controller->V1.DeviceStateChannel]
- [Controller->V1.DeviceStateTargetID];
- if (CommandStatus != DAC960_V1_NormalCompletion)
- {
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- }
- else
- memcpy(InquiryUnitSerialNumber,
- Controller->V1.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- Controller->V1.NeedDeviceSerialNumberInformation = false;
- }
- }
- /*
- Begin submitting new monitoring commands.
- */
- if (Controller->V1.NewEventLogSequenceNumber
- - Controller->V1.OldEventLogSequenceNumber > 0)
- {
- Command->V1.CommandMailbox.Type3E.CommandOpcode =
- DAC960_V1_PerformEventLogOperation;
- Command->V1.CommandMailbox.Type3E.OperationType =
- DAC960_V1_GetEventLogEntry;
- Command->V1.CommandMailbox.Type3E.OperationQualifier = 1;
- Command->V1.CommandMailbox.Type3E.SequenceNumber =
- Controller->V1.OldEventLogSequenceNumber;
- Command->V1.CommandMailbox.Type3E.BusAddress =
- Controller->V1.EventLogEntryDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedErrorTableInformation)
- {
- Controller->V1.NeedErrorTableInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetErrorTable;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewErrorTableDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress &&
- Controller->V1.RebuildProgressFirst)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceStateInformation)
- {
- if (Controller->V1.NeedDeviceInquiryInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
-
- dma_addr_t NewInquiryStandardDataDMA =
- Controller->V1.NewInquiryStandardDataDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->BusAddress = NewInquiryStandardDataDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 0; /* EVPD = 0 */
- DCDB->CDB[2] = 0; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedDeviceSerialNumberInformation)
- {
- DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB;
- dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA;
- dma_addr_t NewInquiryUnitSerialNumberDMA =
- Controller->V1.NewInquiryUnitSerialNumberDMA;
-
- Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB;
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA;
- DCDB->Channel = Controller->V1.DeviceStateChannel;
- DCDB->TargetID = Controller->V1.DeviceStateTargetID;
- DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem;
- DCDB->EarlyStatus = false;
- DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds;
- DCDB->NoAutomaticRequestSense = false;
- DCDB->DisconnectPermitted = true;
- DCDB->TransferLength =
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->BusAddress = NewInquiryUnitSerialNumberDMA;
- DCDB->CDBLength = 6;
- DCDB->TransferLengthHigh4 = 0;
- DCDB->SenseLength = sizeof(DCDB->SenseData);
- DCDB->CDB[0] = 0x12; /* INQUIRY */
- DCDB->CDB[1] = 1; /* EVPD = 1 */
- DCDB->CDB[2] = 0x80; /* Page Code */
- DCDB->CDB[3] = 0; /* Reserved */
- DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T);
- DCDB->CDB[5] = 0; /* Control */
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.StartDeviceStateScan)
- {
- Controller->V1.DeviceStateChannel = 0;
- Controller->V1.DeviceStateTargetID = 0;
- Controller->V1.StartDeviceStateScan = false;
- }
- else if (++Controller->V1.DeviceStateTargetID == Controller->Targets)
- {
- Controller->V1.DeviceStateChannel++;
- Controller->V1.DeviceStateTargetID = 0;
- }
- if (Controller->V1.DeviceStateChannel < Controller->Channels)
- {
- Controller->V1.NewDeviceState->DeviceState =
- DAC960_V1_Device_Dead;
- Command->V1.CommandMailbox.Type3D.CommandOpcode =
- DAC960_V1_GetDeviceState;
- Command->V1.CommandMailbox.Type3D.Channel =
- Controller->V1.DeviceStateChannel;
- Command->V1.CommandMailbox.Type3D.TargetID =
- Controller->V1.DeviceStateTargetID;
- Command->V1.CommandMailbox.Type3D.BusAddress =
- Controller->V1.NewDeviceStateDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->V1.NeedDeviceStateInformation = false;
- }
- if (Controller->V1.NeedLogicalDriveInformation)
- {
- Controller->V1.NeedLogicalDriveInformation = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetLogicalDriveInformation;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.NewLogicalDriveInformationDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedRebuildProgress)
- {
- Controller->V1.NeedRebuildProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_GetRebuildProgress;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedConsistencyCheckProgress)
- {
- Controller->V1.NeedConsistencyCheckProgress = false;
- Command->V1.CommandMailbox.Type3.CommandOpcode =
- DAC960_V1_RebuildStat;
- Command->V1.CommandMailbox.Type3.BusAddress =
- Controller->V1.RebuildProgressDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V1.NeedBackgroundInitializationStatus)
- {
- Controller->V1.NeedBackgroundInitializationStatus = false;
- Command->V1.CommandMailbox.Type3B.CommandOpcode =
- DAC960_V1_BackgroundInitializationControl;
- Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20;
- Command->V1.CommandMailbox.Type3B.BusAddress =
- Controller->V1.BackgroundInitializationStatusDMA;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_MonitoringTimerInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand;
- KernelCommand->CommandStatus = Command->V1.CommandStatus;
- Command->V1.KernelCommand = NULL;
- if (CommandOpcode == DAC960_V1_DCDB)
- Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel]
- [KernelCommand->DCDB->TargetID] =
- false;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V1_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-
-/*
- DAC960_V2_ReadWriteError prints an appropriate error message for Command
- when an error occurs on a Read or Write operation.
-*/
-
-static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- static const unsigned char *SenseErrors[] = {
- "NO SENSE", "RECOVERED ERROR",
- "NOT READY", "MEDIUM ERROR",
- "HARDWARE ERROR", "ILLEGAL REQUEST",
- "UNIT ATTENTION", "DATA PROTECT",
- "BLANK CHECK", "VENDOR-SPECIFIC",
- "COPY ABORTED", "ABORTED COMMAND",
- "EQUAL", "VOLUME OVERFLOW",
- "MISCOMPARE", "RESERVED"
- };
- unsigned char *CommandName = "UNKNOWN";
- switch (Command->CommandType)
- {
- case DAC960_ReadCommand:
- case DAC960_ReadRetryCommand:
- CommandName = "READ";
- break;
- case DAC960_WriteCommand:
- case DAC960_WriteRetryCommand:
- CommandName = "WRITE";
- break;
- case DAC960_MonitoringCommand:
- case DAC960_ImmediateCommand:
- case DAC960_QueuedCommand:
- break;
- }
- DAC960_Error("Error Condition %s on %s:\n", Controller,
- SenseErrors[Command->V2.RequestSense->SenseKey], CommandName);
- DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n",
- Controller, Controller->ControllerNumber,
- Command->LogicalDriveNumber, Command->BlockNumber,
- Command->BlockNumber + Command->BlockCount - 1);
-}
-
-
-/*
- DAC960_V2_ReportEvent prints an appropriate message when a Controller Event
- occurs.
-*/
-
-static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller,
- DAC960_V2_Event_T *Event)
-{
- DAC960_SCSI_RequestSense_T *RequestSense =
- (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData;
- unsigned char MessageBuffer[DAC960_LineBufferSize];
- static struct { int EventCode; unsigned char *EventMessage; } EventList[] =
- { /* Physical Device Events (0x0000 - 0x007F) */
- { 0x0001, "P Online" },
- { 0x0002, "P Standby" },
- { 0x0005, "P Automatic Rebuild Started" },
- { 0x0006, "P Manual Rebuild Started" },
- { 0x0007, "P Rebuild Completed" },
- { 0x0008, "P Rebuild Cancelled" },
- { 0x0009, "P Rebuild Failed for Unknown Reasons" },
- { 0x000A, "P Rebuild Failed due to New Physical Device" },
- { 0x000B, "P Rebuild Failed due to Logical Drive Failure" },
- { 0x000C, "S Offline" },
- { 0x000D, "P Found" },
- { 0x000E, "P Removed" },
- { 0x000F, "P Unconfigured" },
- { 0x0010, "P Expand Capacity Started" },
- { 0x0011, "P Expand Capacity Completed" },
- { 0x0012, "P Expand Capacity Failed" },
- { 0x0013, "P Command Timed Out" },
- { 0x0014, "P Command Aborted" },
- { 0x0015, "P Command Retried" },
- { 0x0016, "P Parity Error" },
- { 0x0017, "P Soft Error" },
- { 0x0018, "P Miscellaneous Error" },
- { 0x0019, "P Reset" },
- { 0x001A, "P Active Spare Found" },
- { 0x001B, "P Warm Spare Found" },
- { 0x001C, "S Sense Data Received" },
- { 0x001D, "P Initialization Started" },
- { 0x001E, "P Initialization Completed" },
- { 0x001F, "P Initialization Failed" },
- { 0x0020, "P Initialization Cancelled" },
- { 0x0021, "P Failed because Write Recovery Failed" },
- { 0x0022, "P Failed because SCSI Bus Reset Failed" },
- { 0x0023, "P Failed because of Double Check Condition" },
- { 0x0024, "P Failed because Device Cannot Be Accessed" },
- { 0x0025, "P Failed because of Gross Error on SCSI Processor" },
- { 0x0026, "P Failed because of Bad Tag from Device" },
- { 0x0027, "P Failed because of Command Timeout" },
- { 0x0028, "P Failed because of System Reset" },
- { 0x0029, "P Failed because of Busy Status or Parity Error" },
- { 0x002A, "P Failed because Host Set Device to Failed State" },
- { 0x002B, "P Failed because of Selection Timeout" },
- { 0x002C, "P Failed because of SCSI Bus Phase Error" },
- { 0x002D, "P Failed because Device Returned Unknown Status" },
- { 0x002E, "P Failed because Device Not Ready" },
- { 0x002F, "P Failed because Device Not Found at Startup" },
- { 0x0030, "P Failed because COD Write Operation Failed" },
- { 0x0031, "P Failed because BDT Write Operation Failed" },
- { 0x0039, "P Missing at Startup" },
- { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" },
- { 0x003C, "P Temporarily Offline Device Automatically Made Online" },
- { 0x003D, "P Standby Rebuild Started" },
- /* Logical Device Events (0x0080 - 0x00FF) */
- { 0x0080, "M Consistency Check Started" },
- { 0x0081, "M Consistency Check Completed" },
- { 0x0082, "M Consistency Check Cancelled" },
- { 0x0083, "M Consistency Check Completed With Errors" },
- { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" },
- { 0x0085, "M Consistency Check Failed due to Physical Device Failure" },
- { 0x0086, "L Offline" },
- { 0x0087, "L Critical" },
- { 0x0088, "L Online" },
- { 0x0089, "M Automatic Rebuild Started" },
- { 0x008A, "M Manual Rebuild Started" },
- { 0x008B, "M Rebuild Completed" },
- { 0x008C, "M Rebuild Cancelled" },
- { 0x008D, "M Rebuild Failed for Unknown Reasons" },
- { 0x008E, "M Rebuild Failed due to New Physical Device" },
- { 0x008F, "M Rebuild Failed due to Logical Drive Failure" },
- { 0x0090, "M Initialization Started" },
- { 0x0091, "M Initialization Completed" },
- { 0x0092, "M Initialization Cancelled" },
- { 0x0093, "M Initialization Failed" },
- { 0x0094, "L Found" },
- { 0x0095, "L Deleted" },
- { 0x0096, "M Expand Capacity Started" },
- { 0x0097, "M Expand Capacity Completed" },
- { 0x0098, "M Expand Capacity Failed" },
- { 0x0099, "L Bad Block Found" },
- { 0x009A, "L Size Changed" },
- { 0x009B, "L Type Changed" },
- { 0x009C, "L Bad Data Block Found" },
- { 0x009E, "L Read of Data Block in BDT" },
- { 0x009F, "L Write Back Data for Disk Block Lost" },
- { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" },
- { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" },
- { 0x00A2, "L Standby Rebuild Started" },
- /* Fault Management Events (0x0100 - 0x017F) */
- { 0x0140, "E Fan %d Failed" },
- { 0x0141, "E Fan %d OK" },
- { 0x0142, "E Fan %d Not Present" },
- { 0x0143, "E Power Supply %d Failed" },
- { 0x0144, "E Power Supply %d OK" },
- { 0x0145, "E Power Supply %d Not Present" },
- { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" },
- { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" },
- { 0x0148, "E Temperature Sensor %d Temperature Normal" },
- { 0x0149, "E Temperature Sensor %d Not Present" },
- { 0x014A, "E Enclosure Management Unit %d Access Critical" },
- { 0x014B, "E Enclosure Management Unit %d Access OK" },
- { 0x014C, "E Enclosure Management Unit %d Access Offline" },
- /* Controller Events (0x0180 - 0x01FF) */
- { 0x0181, "C Cache Write Back Error" },
- { 0x0188, "C Battery Backup Unit Found" },
- { 0x0189, "C Battery Backup Unit Charge Level Low" },
- { 0x018A, "C Battery Backup Unit Charge Level OK" },
- { 0x0193, "C Installation Aborted" },
- { 0x0195, "C Battery Backup Unit Physically Removed" },
- { 0x0196, "C Memory Error During Warm Boot" },
- { 0x019E, "C Memory Soft ECC Error Corrected" },
- { 0x019F, "C Memory Hard ECC Error Corrected" },
- { 0x01A2, "C Battery Backup Unit Failed" },
- { 0x01AB, "C Mirror Race Recovery Failed" },
- { 0x01AC, "C Mirror Race on Critical Drive" },
- /* Controller Internal Processor Events */
- { 0x0380, "C Internal Controller Hung" },
- { 0x0381, "C Internal Controller Firmware Breakpoint" },
- { 0x0390, "C Internal Controller i960 Processor Specific Error" },
- { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" },
- { 0, "" } };
- int EventListIndex = 0, EventCode;
- unsigned char EventType, *EventMessage;
- if (Event->EventCode == 0x1C &&
- RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific &&
- (RequestSense->AdditionalSenseCode == 0x80 ||
- RequestSense->AdditionalSenseCode == 0x81))
- Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) |
- RequestSense->AdditionalSenseCodeQualifier;
- while (true)
- {
- EventCode = EventList[EventListIndex].EventCode;
- if (EventCode == Event->EventCode || EventCode == 0) break;
- EventListIndex++;
- }
- EventType = EventList[EventListIndex].EventMessage[0];
- EventMessage = &EventList[EventListIndex].EventMessage[2];
- if (EventCode == 0)
- {
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- return;
- }
- switch (EventType)
- {
- case 'P':
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- break;
- case 'L':
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'M':
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller,
- Event->LogicalUnit, Controller->ControllerNumber,
- Event->LogicalUnit, EventMessage);
- break;
- case 'S':
- if (RequestSense->SenseKey == DAC960_SenseKey_NoSense ||
- (RequestSense->SenseKey == DAC960_SenseKey_NotReady &&
- RequestSense->AdditionalSenseCode == 0x04 &&
- (RequestSense->AdditionalSenseCodeQualifier == 0x01 ||
- RequestSense->AdditionalSenseCodeQualifier == 0x02)))
- break;
- DAC960_Critical("Physical Device %d:%d %s\n", Controller,
- Event->Channel, Event->TargetID, EventMessage);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Sense Key = %X, ASC = %02X, ASCQ = %02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->SenseKey,
- RequestSense->AdditionalSenseCode,
- RequestSense->AdditionalSenseCodeQualifier);
- DAC960_Critical("Physical Device %d:%d Request Sense: "
- "Information = %02X%02X%02X%02X "
- "%02X%02X%02X%02X\n",
- Controller,
- Event->Channel,
- Event->TargetID,
- RequestSense->Information[0],
- RequestSense->Information[1],
- RequestSense->Information[2],
- RequestSense->Information[3],
- RequestSense->CommandSpecificInformation[0],
- RequestSense->CommandSpecificInformation[1],
- RequestSense->CommandSpecificInformation[2],
- RequestSense->CommandSpecificInformation[3]);
- break;
- case 'E':
- if (Controller->SuppressEnclosureMessages) break;
- sprintf(MessageBuffer, EventMessage, Event->LogicalUnit);
- DAC960_Critical("Enclosure %d %s\n", Controller,
- Event->TargetID, MessageBuffer);
- break;
- case 'C':
- DAC960_Critical("Controller %s\n", Controller, EventMessage);
- break;
- default:
- DAC960_Critical("Unknown Controller Event Code %04X\n",
- Controller, Event->EventCode);
- break;
- }
-}
-
-
-/*
- DAC960_V2_ReportProgress prints an appropriate progress message for
- Logical Device Long Operations.
-*/
-
-static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller,
- unsigned char *MessageString,
- unsigned int LogicalDeviceNumber,
- unsigned long BlocksCompleted,
- unsigned long LogicalDeviceSize)
-{
- Controller->EphemeralProgressMessage = true;
- DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) "
- "%d%% completed\n", Controller,
- MessageString,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7));
- Controller->EphemeralProgressMessage = false;
-}
-
-
-/*
- DAC960_V2_ProcessCompletedCommand performs completion processing for Command
- for DAC960 V2 Firmware Controllers.
-*/
-
-static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_CommandType_T CommandType = Command->CommandType;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode;
- DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode;
- DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus;
-
- if (CommandType == DAC960_ReadCommand ||
- CommandType == DAC960_WriteCommand)
- {
-
-#ifdef FORCE_RETRY_DEBUG
- CommandStatus = DAC960_V2_AbormalCompletion;
-#endif
- Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError;
-
- if (CommandStatus == DAC960_V2_NormalCompletion) {
-
- if (!DAC960_ProcessCompletedRequest(Command, true))
- BUG();
-
- } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError)
- {
- /*
- * break the command down into pieces and resubmit each
- * piece, hoping that some of them will succeed.
- */
- DAC960_queue_partial_rw(Command);
- return;
- }
- else
- {
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- /*
- Perform completion processing for all buffers in this I/O Request.
- */
- (void)DAC960_ProcessCompletedRequest(Command, false);
- }
- }
- else if (CommandType == DAC960_ReadRetryCommand ||
- CommandType == DAC960_WriteRetryCommand)
- {
- bool normal_completion;
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- static int retry_count = 1;
-#endif
- /*
- Perform completion processing for the portion that was
- retried, and submit the next portion, if any.
- */
- normal_completion = true;
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- normal_completion = false;
- if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady)
- DAC960_V2_ReadWriteError(Command);
- }
-
-#ifdef FORCE_RETRY_FAILURE_DEBUG
- if (!(++retry_count % 10000)) {
- printk("V2 error retry failure test\n");
- normal_completion = false;
- DAC960_V2_ReadWriteError(Command);
- }
-#endif
-
- if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) {
- DAC960_queue_partial_rw(Command);
- return;
- }
- }
- else if (CommandType == DAC960_MonitoringCommand)
- {
- if (Controller->ShutdownMonitoringTimer)
- return;
- if (IOCTLOpcode == DAC960_V2_GetControllerInfo)
- {
- DAC960_V2_ControllerInfo_T *NewControllerInfo =
- Controller->V2.NewControllerInformation;
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- Controller->LogicalDriveCount =
- NewControllerInfo->LogicalDevicesPresent;
- Controller->V2.NeedLogicalDeviceInformation = true;
- Controller->V2.NeedPhysicalDeviceInformation = true;
- Controller->V2.StartLogicalDeviceInformationScan = true;
- Controller->V2.StartPhysicalDeviceInformationScan = true;
- Controller->MonitoringAlertMode =
- (NewControllerInfo->LogicalDevicesCritical > 0 ||
- NewControllerInfo->LogicalDevicesOffline > 0 ||
- NewControllerInfo->PhysicalDisksCritical > 0 ||
- NewControllerInfo->PhysicalDisksOffline > 0);
- memcpy(ControllerInfo, NewControllerInfo,
- sizeof(DAC960_V2_ControllerInfo_T));
- }
- else if (IOCTLOpcode == DAC960_V2_GetEvent)
- {
- if (CommandStatus == DAC960_V2_NormalCompletion) {
- DAC960_V2_ReportEvent(Controller, Controller->V2.Event);
- }
- Controller->V2.NextEventSequenceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo =
- Controller->V2.NewPhysicalDeviceInformation;
- unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- unsigned int DeviceIndex;
- while (PhysicalDeviceInfo != NULL &&
- (NewPhysicalDeviceInfo->Channel >
- PhysicalDeviceInfo->Channel ||
- (NewPhysicalDeviceInfo->Channel ==
- PhysicalDeviceInfo->Channel &&
- (NewPhysicalDeviceInfo->TargetID >
- PhysicalDeviceInfo->TargetID ||
- (NewPhysicalDeviceInfo->TargetID ==
- PhysicalDeviceInfo->TargetID &&
- NewPhysicalDeviceInfo->LogicalUnit >
- PhysicalDeviceInfo->LogicalUnit)))))
- {
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- for (DeviceIndex = PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex++)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex+1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1];
- }
- Controller->V2.PhysicalDeviceInformation
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- Controller->V2.InquiryUnitSerialNumber
- [DAC960_V2_MaxPhysicalDevices-1] = NULL;
- PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex];
- InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex];
- }
- if (PhysicalDeviceInfo == NULL ||
- (NewPhysicalDeviceInfo->Channel !=
- PhysicalDeviceInfo->Channel) ||
- (NewPhysicalDeviceInfo->TargetID !=
- PhysicalDeviceInfo->TargetID) ||
- (NewPhysicalDeviceInfo->LogicalUnit !=
- PhysicalDeviceInfo->LogicalUnit))
- {
- PhysicalDeviceInfo =
- kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC);
- InquiryUnitSerialNumber =
- kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T),
- GFP_ATOMIC);
- if (InquiryUnitSerialNumber == NULL ||
- PhysicalDeviceInfo == NULL)
- {
- kfree(InquiryUnitSerialNumber);
- InquiryUnitSerialNumber = NULL;
- kfree(PhysicalDeviceInfo);
- PhysicalDeviceInfo = NULL;
- }
- DAC960_Critical("Physical Device %d:%d Now Exists%s\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (PhysicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (PhysicalDeviceInfo != NULL)
- {
- memset(PhysicalDeviceInfo, 0,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- PhysicalDeviceInfo->PhysicalDeviceState =
- DAC960_V2_Device_InvalidState;
- memset(InquiryUnitSerialNumber, 0,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1;
- DeviceIndex > PhysicalDeviceIndex;
- DeviceIndex--)
- {
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex-1];
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1];
- }
- Controller->V2.PhysicalDeviceInformation
- [PhysicalDeviceIndex] =
- PhysicalDeviceInfo;
- Controller->V2.InquiryUnitSerialNumber
- [PhysicalDeviceIndex] =
- InquiryUnitSerialNumber;
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- }
- }
- if (PhysicalDeviceInfo != NULL)
- {
- if (NewPhysicalDeviceInfo->PhysicalDeviceState !=
- PhysicalDeviceInfo->PhysicalDeviceState)
- DAC960_Critical(
- "Physical Device %d:%d is now %s\n", Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- (NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Online
- ? "ONLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Rebuild
- ? "REBUILD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Missing
- ? "MISSING"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Critical
- ? "CRITICAL"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead
- ? "DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_SuspectedDead
- ? "SUSPECTED-DEAD"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_CommandedOffline
- ? "COMMANDED-OFFLINE"
- : NewPhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Standby
- ? "STANDBY" : "UNKNOWN"));
- if ((NewPhysicalDeviceInfo->ParityErrors !=
- PhysicalDeviceInfo->ParityErrors) ||
- (NewPhysicalDeviceInfo->SoftErrors !=
- PhysicalDeviceInfo->SoftErrors) ||
- (NewPhysicalDeviceInfo->HardErrors !=
- PhysicalDeviceInfo->HardErrors) ||
- (NewPhysicalDeviceInfo->MiscellaneousErrors !=
- PhysicalDeviceInfo->MiscellaneousErrors) ||
- (NewPhysicalDeviceInfo->CommandTimeouts !=
- PhysicalDeviceInfo->CommandTimeouts) ||
- (NewPhysicalDeviceInfo->Retries !=
- PhysicalDeviceInfo->Retries) ||
- (NewPhysicalDeviceInfo->Aborts !=
- PhysicalDeviceInfo->Aborts) ||
- (NewPhysicalDeviceInfo->PredictedFailuresDetected !=
- PhysicalDeviceInfo->PredictedFailuresDetected))
- {
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Parity = %d, Soft = %d, "
- "Hard = %d, Misc = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->ParityErrors,
- NewPhysicalDeviceInfo->SoftErrors,
- NewPhysicalDeviceInfo->HardErrors,
- NewPhysicalDeviceInfo->MiscellaneousErrors);
- DAC960_Critical("Physical Device %d:%d Errors: "
- "Timeouts = %d, Retries = %d, "
- "Aborts = %d, Predicted = %d\n",
- Controller,
- NewPhysicalDeviceInfo->Channel,
- NewPhysicalDeviceInfo->TargetID,
- NewPhysicalDeviceInfo->CommandTimeouts,
- NewPhysicalDeviceInfo->Retries,
- NewPhysicalDeviceInfo->Aborts,
- NewPhysicalDeviceInfo
- ->PredictedFailuresDetected);
- }
- if ((PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_Dead ||
- PhysicalDeviceInfo->PhysicalDeviceState
- == DAC960_V2_Device_InvalidState) &&
- NewPhysicalDeviceInfo->PhysicalDeviceState
- != DAC960_V2_Device_Dead)
- Controller->V2.NeedDeviceSerialNumberInformation = true;
- memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo,
- sizeof(DAC960_V2_PhysicalDeviceInfo_T));
- }
- NewPhysicalDeviceInfo->LogicalUnit++;
- Controller->V2.PhysicalDeviceIndex++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid)
- {
- unsigned int DeviceIndex;
- for (DeviceIndex = Controller->V2.PhysicalDeviceIndex;
- DeviceIndex < DAC960_V2_MaxPhysicalDevices;
- DeviceIndex++)
- {
- DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo =
- Controller->V2.PhysicalDeviceInformation[DeviceIndex];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex];
- if (PhysicalDeviceInfo == NULL) break;
- DAC960_Critical("Physical Device %d:%d No Longer Exists\n",
- Controller,
- PhysicalDeviceInfo->Channel,
- PhysicalDeviceInfo->TargetID);
- Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL;
- Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL;
- kfree(PhysicalDeviceInfo);
- kfree(InquiryUnitSerialNumber);
- }
- Controller->V2.NeedPhysicalDeviceInformation = false;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid &&
- CommandStatus == DAC960_V2_NormalCompletion)
- {
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo =
- Controller->V2.NewLogicalDeviceInformation;
- unsigned short LogicalDeviceNumber =
- NewLogicalDeviceInfo->LogicalDeviceNumber;
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber];
- if (LogicalDeviceInfo == NULL)
- {
- DAC960_V2_PhysicalDevice_T PhysicalDevice;
- PhysicalDevice.Controller = 0;
- PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel;
- PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID;
- PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit;
- Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] =
- PhysicalDevice;
- LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T),
- GFP_ATOMIC);
- Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] =
- LogicalDeviceInfo;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "Now Exists%s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (LogicalDeviceInfo != NULL
- ? "" : " - Allocation Failed"));
- if (LogicalDeviceInfo != NULL)
- {
- memset(LogicalDeviceInfo, 0,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- }
- if (LogicalDeviceInfo != NULL)
- {
- unsigned long LogicalDeviceSize =
- NewLogicalDeviceInfo->ConfigurableDeviceSize;
- if (NewLogicalDeviceInfo->LogicalDeviceState !=
- LogicalDeviceInfo->LogicalDeviceState)
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "is now %s\n", Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Online
- ? "ONLINE"
- : NewLogicalDeviceInfo->LogicalDeviceState
- == DAC960_V2_LogicalDevice_Critical
- ? "CRITICAL" : "OFFLINE"));
- if ((NewLogicalDeviceInfo->SoftErrors !=
- LogicalDeviceInfo->SoftErrors) ||
- (NewLogicalDeviceInfo->CommandsFailed !=
- LogicalDeviceInfo->CommandsFailed) ||
- (NewLogicalDeviceInfo->DeferredWriteErrors !=
- LogicalDeviceInfo->DeferredWriteErrors))
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: "
- "Soft = %d, Failed = %d, Deferred Write = %d\n",
- Controller, LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- NewLogicalDeviceInfo->SoftErrors,
- NewLogicalDeviceInfo->CommandsFailed,
- NewLogicalDeviceInfo->DeferredWriteErrors);
- if (NewLogicalDeviceInfo->ConsistencyCheckInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Consistency Check",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ConsistencyCheckBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->RebuildInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Rebuild",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->RebuildBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Background Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->BackgroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Foreground Initialization",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->ForegroundInitializationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->DataMigrationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Data Migration",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->DataMigrationBlockNumber,
- LogicalDeviceSize);
- else if (NewLogicalDeviceInfo->PatrolOperationInProgress)
- DAC960_V2_ReportProgress(Controller,
- "Patrol Operation",
- LogicalDeviceNumber,
- NewLogicalDeviceInfo
- ->PatrolOperationBlockNumber,
- LogicalDeviceSize);
- if (LogicalDeviceInfo->BackgroundInitializationInProgress &&
- !NewLogicalDeviceInfo->BackgroundInitializationInProgress)
- DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) "
- "Background Initialization %s\n",
- Controller,
- LogicalDeviceNumber,
- Controller->ControllerNumber,
- LogicalDeviceNumber,
- (NewLogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized
- ? "Completed" : "Failed"));
- memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo,
- sizeof(DAC960_V2_LogicalDeviceInfo_T));
- }
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDeviceNumber] = true;
- NewLogicalDeviceInfo->LogicalDeviceNumber++;
- }
- else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL ||
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber])
- continue;
- DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) "
- "No Longer Exists\n", Controller,
- LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- Controller->V2.LogicalDeviceInformation
- [LogicalDriveNumber] = NULL;
- kfree(LogicalDeviceInfo);
- Controller->LogicalDriveInitiallyAccessible
- [LogicalDriveNumber] = false;
- DAC960_ComputeGenericDiskInfo(Controller);
- }
- Controller->V2.NeedLogicalDeviceInformation = false;
- }
- else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1];
-
- if (CommandStatus != DAC960_V2_NormalCompletion) {
- memset(InquiryUnitSerialNumber,
- 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
- } else
- memcpy(InquiryUnitSerialNumber,
- Controller->V2.NewInquiryUnitSerialNumber,
- sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T));
-
- Controller->V2.NeedDeviceSerialNumberInformation = false;
- }
-
- if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- - Controller->V2.NextEventSequenceNumber > 0)
- {
- CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T);
- CommandMailbox->GetEvent.EventSequenceNumberHigh16 =
- Controller->V2.NextEventSequenceNumber >> 16;
- CommandMailbox->GetEvent.ControllerNumber = 0;
- CommandMailbox->GetEvent.IOCTL_Opcode =
- DAC960_V2_GetEvent;
- CommandMailbox->GetEvent.EventSequenceNumberLow16 =
- Controller->V2.NextEventSequenceNumber & 0xFFFF;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.EventDMA;
- CommandMailbox->GetEvent.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->GetEvent.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedPhysicalDeviceInformation)
- {
- if (Controller->V2.NeedDeviceSerialNumberInformation)
- {
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber =
- Controller->V2.NewInquiryUnitSerialNumber;
- InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F;
-
- DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox,
- Controller->V2.NewPhysicalDeviceInformation->Channel,
- Controller->V2.NewPhysicalDeviceInformation->TargetID,
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1);
-
-
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.StartPhysicalDeviceInformationScan)
- {
- Controller->V2.PhysicalDeviceIndex = 0;
- Controller->V2.NewPhysicalDeviceInformation->Channel = 0;
- Controller->V2.NewPhysicalDeviceInformation->TargetID = 0;
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0;
- Controller->V2.StartPhysicalDeviceInformationScan = false;
- }
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalDeviceInfo_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit =
- Controller->V2.NewPhysicalDeviceInformation->LogicalUnit;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID =
- Controller->V2.NewPhysicalDeviceInformation->TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel =
- Controller->V2.NewPhysicalDeviceInformation->Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetPhysicalDeviceInfoValid;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewPhysicalDeviceInformationDMA;
- CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- if (Controller->V2.NeedLogicalDeviceInformation)
- {
- if (Controller->V2.StartLogicalDeviceInformationScan)
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- Controller->V2.LogicalDriveFoundDuringScan
- [LogicalDriveNumber] = false;
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0;
- Controller->V2.StartLogicalDeviceInformationScan = false;
- }
- CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->LogicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_LogicalDeviceInfo_T);
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_GetLogicalDeviceInfoValid;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewLogicalDeviceInformationDMA;
- CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->LogicalDeviceInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
- return;
- }
- Controller->MonitoringTimerCount++;
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- }
- if (CommandType == DAC960_ImmediateCommand)
- {
- complete(Command->Completion);
- Command->Completion = NULL;
- return;
- }
- if (CommandType == DAC960_QueuedCommand)
- {
- DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand;
- KernelCommand->CommandStatus = CommandStatus;
- KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength;
- KernelCommand->DataTransferLength = Command->V2.DataTransferResidue;
- Command->V2.KernelCommand = NULL;
- DAC960_DeallocateCommand(Command);
- KernelCommand->CompletionFunction(KernelCommand);
- return;
- }
- /*
- Queue a Status Monitoring Command to the Controller using the just
- completed Command if one was deferred previously due to lack of a
- free Command when the Monitoring Timer Function was called.
- */
- if (Controller->MonitoringCommandDeferred)
- {
- Controller->MonitoringCommandDeferred = false;
- DAC960_V2_QueueMonitoringCommand(Command);
- return;
- }
- /*
- Deallocate the Command.
- */
- DAC960_DeallocateCommand(Command);
- /*
- Wake up any processes waiting on a free Command.
- */
- wake_up(&Controller->CommandWaitQueue);
-}
-
-/*
- DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V2.NextStatusMailbox;
- while (NextStatusMailbox->Fields.CommandIdentifier > 0)
- {
- DAC960_V2_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- Command->V2.RequestSenseLength =
- NextStatusMailbox->Fields.RequestSenseLength;
- Command->V2.DataTransferResidue =
- NextStatusMailbox->Fields.DataTransferResidue;
- NextStatusMailbox->Words[0] = 0;
- if (++NextStatusMailbox > Controller->V2.LastStatusMailbox)
- NextStatusMailbox = Controller->V2.FirstStatusMailbox;
- DAC960_V2_ProcessCompletedCommand(Command);
- }
- Controller->V2.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress);
- NextStatusMailbox = Controller->V1.NextStatusMailbox;
- while (NextStatusMailbox->Fields.Valid)
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- NextStatusMailbox->Fields.CommandIdentifier;
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus;
- NextStatusMailbox->Word = 0;
- if (++NextStatusMailbox > Controller->V1.LastStatusMailbox)
- NextStatusMailbox = Controller->V1.FirstStatusMailbox;
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- Controller->V1.NextStatusMailbox = NextStatusMailbox;
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series
- Controllers.
-*/
-
-static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series
- Controllers.
-
- Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely
- on the data having been placed into DAC960_Controller_T, rather than
- an arbitrary buffer.
-*/
-
-static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel,
- void *DeviceIdentifier)
-{
- DAC960_Controller_T *Controller = DeviceIdentifier;
- void __iomem *ControllerBaseAddress = Controller->BaseAddress;
- unsigned long flags;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while (DAC960_PD_StatusAvailableP(ControllerBaseAddress))
- {
- DAC960_V1_CommandIdentifier_T CommandIdentifier =
- DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress);
- DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1];
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_CommandOpcode_T CommandOpcode =
- CommandMailbox->Common.CommandOpcode;
- Command->V1.CommandStatus =
- DAC960_PD_ReadStatusRegister(ControllerBaseAddress);
- DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress);
- DAC960_PD_AcknowledgeStatus(ControllerBaseAddress);
- switch (CommandOpcode)
- {
- case DAC960_V1_Enquiry_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry;
- DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry);
- break;
- case DAC960_V1_GetDeviceState_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_GetDeviceState;
- DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState);
- break;
- case DAC960_V1_Read_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_Write_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_ReadWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_ReadWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- case DAC960_V1_WriteWithScatterGather_Old:
- Command->V1.CommandMailbox.Common.CommandOpcode =
- DAC960_V1_WriteWithScatterGather;
- DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox);
- break;
- default:
- break;
- }
- DAC960_V1_ProcessCompletedCommand(Command);
- }
- /*
- Attempt to remove additional I/O Requests from the Controller's
- I/O Request Queue and queue them to the Controller.
- */
- DAC960_ProcessRequest(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return IRQ_HANDLED;
-}
-
-
-/*
- DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1
- Firmware Controllers.
-*/
-
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry;
- CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2
- Firmware Controllers.
-*/
-
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command)
-{
- DAC960_Controller_T *Controller = Command->Controller;
- DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_MonitoringCommand;
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- DAC960_QueueCommand(Command);
-}
-
-
-/*
- DAC960_MonitoringTimerFunction is the timer function for monitoring
- the status of DAC960 Controllers.
-*/
-
-static void DAC960_MonitoringTimerFunction(struct timer_list *t)
-{
- DAC960_Controller_T *Controller = from_timer(Controller, t, MonitoringTimer);
- DAC960_Command_T *Command;
- unsigned long flags;
-
- if (Controller->FirmwareType == DAC960_V1_Controller)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V1_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- }
- else
- {
- DAC960_V2_ControllerInfo_T *ControllerInfo =
- &Controller->V2.ControllerInformation;
- unsigned int StatusChangeCounter =
- Controller->V2.HealthStatusBuffer->StatusChangeCounter;
- bool ForceMonitoringCommand = false;
- if (time_after(jiffies, Controller->SecondaryMonitoringTime
- + DAC960_SecondaryMonitoringInterval))
- {
- int LogicalDriveNumber;
- for (LogicalDriveNumber = 0;
- LogicalDriveNumber < DAC960_MaxLogicalDrives;
- LogicalDriveNumber++)
- {
- DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo =
- Controller->V2.LogicalDeviceInformation[LogicalDriveNumber];
- if (LogicalDeviceInfo == NULL) continue;
- if (!LogicalDeviceInfo->LogicalDeviceControl
- .LogicalDeviceInitialized)
- {
- ForceMonitoringCommand = true;
- break;
- }
- }
- Controller->SecondaryMonitoringTime = jiffies;
- }
- if (StatusChangeCounter == Controller->V2.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == Controller->V2.NextEventSequenceNumber &&
- (ControllerInfo->BackgroundInitializationsActive +
- ControllerInfo->LogicalDeviceInitializationsActive +
- ControllerInfo->PhysicalDeviceInitializationsActive +
- ControllerInfo->ConsistencyChecksActive +
- ControllerInfo->RebuildsActive +
- ControllerInfo->OnlineExpansionsActive == 0 ||
- time_before(jiffies, Controller->PrimaryMonitoringTime
- + DAC960_MonitoringTimerInterval)) &&
- !ForceMonitoringCommand)
- {
- Controller->MonitoringTimer.expires =
- jiffies + DAC960_HealthStatusMonitoringInterval;
- add_timer(&Controller->MonitoringTimer);
- return;
- }
- Controller->V2.StatusChangeCounter = StatusChangeCounter;
- Controller->PrimaryMonitoringTime = jiffies;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- /*
- Queue a Status Monitoring Command to Controller.
- */
- Command = DAC960_AllocateCommand(Controller);
- if (Command != NULL)
- DAC960_V2_QueueMonitoringCommand(Command);
- else Controller->MonitoringCommandDeferred = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- /*
- Wake up any processes waiting on a Health Status Buffer change.
- */
- wake_up(&Controller->HealthStatusWaitQueue);
- }
-}
-
-/*
- DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount
- additional bytes in the Combined Status Buffer and grows the buffer if
- necessary. It returns true if there is enough room and false otherwise.
-*/
-
-static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller,
- unsigned int ByteCount)
-{
- unsigned char *NewStatusBuffer;
- if (Controller->InitialStatusLength + 1 +
- Controller->CurrentStatusLength + ByteCount + 1 <=
- Controller->CombinedStatusBufferLength)
- return true;
- if (Controller->CombinedStatusBufferLength == 0)
- {
- unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize;
- while (NewStatusBufferLength < ByteCount)
- NewStatusBufferLength *= 2;
- Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength,
- GFP_ATOMIC);
- if (Controller->CombinedStatusBuffer == NULL) return false;
- Controller->CombinedStatusBufferLength = NewStatusBufferLength;
- return true;
- }
- NewStatusBuffer = kmalloc_array(2, Controller->CombinedStatusBufferLength,
- GFP_ATOMIC);
- if (NewStatusBuffer == NULL)
- {
- DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n",
- Controller);
- return false;
- }
- memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer,
- Controller->CombinedStatusBufferLength);
- kfree(Controller->CombinedStatusBuffer);
- Controller->CombinedStatusBuffer = NewStatusBuffer;
- Controller->CombinedStatusBufferLength *= 2;
- Controller->CurrentStatusBuffer =
- &NewStatusBuffer[Controller->InitialStatusLength + 1];
- return true;
-}
-
-
-/*
- DAC960_Message prints Driver Messages.
-*/
-
-static void DAC960_Message(DAC960_MessageLevel_T MessageLevel,
- unsigned char *Format,
- DAC960_Controller_T *Controller,
- ...)
-{
- static unsigned char Buffer[DAC960_LineBufferSize];
- static bool BeginningOfLine = true;
- va_list Arguments;
- int Length = 0;
- va_start(Arguments, Controller);
- Length = vsprintf(Buffer, Format, Arguments);
- va_end(Arguments);
- if (Controller == NULL)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- DAC960_ControllerCount, Buffer);
- else if (MessageLevel == DAC960_AnnounceLevel ||
- MessageLevel == DAC960_InfoLevel)
- {
- if (!Controller->ControllerInitialized)
- {
- if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength],
- Buffer);
- Controller->InitialStatusLength += Length;
- Controller->CurrentStatusBuffer =
- &Controller->CombinedStatusBuffer
- [Controller->InitialStatusLength + 1];
- }
- if (MessageLevel == DAC960_AnnounceLevel)
- {
- static int AnnouncementLines = 0;
- if (++AnnouncementLines <= 2)
- printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel],
- Buffer);
- }
- else
- {
- if (BeginningOfLine)
- {
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s",
- DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else printk("%s", Buffer);
- }
- }
- else if (DAC960_CheckStatusBuffer(Controller, Length))
- {
- strcpy(&Controller->CurrentStatusBuffer[
- Controller->CurrentStatusLength], Buffer);
- Controller->CurrentStatusLength += Length;
- }
- }
- else if (MessageLevel == DAC960_ProgressLevel)
- {
- strcpy(Controller->ProgressBuffer, Buffer);
- Controller->ProgressBufferLength = Length;
- if (Controller->EphemeralProgressMessage)
- {
- if (time_after_eq(jiffies, Controller->LastProgressReportTime
- + DAC960_ProgressReportingInterval))
- {
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- Controller->LastProgressReportTime = jiffies;
- }
- }
- else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else if (MessageLevel == DAC960_UserCriticalLevel)
- {
- strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength],
- Buffer);
- Controller->UserStatusLength += Length;
- if (Buffer[0] != '\n' || Length > 1)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- }
- else
- {
- if (BeginningOfLine)
- printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel],
- Controller->ControllerNumber, Buffer);
- else printk("%s", Buffer);
- }
- BeginningOfLine = (Buffer[Length-1] == '\n');
-}
-
-
-/*
- DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device
- Channel:TargetID specification from a User Command string. It updates
- Channel and TargetID and returns true on success and false on failure.
-*/
-
-static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *Channel,
- unsigned char *TargetID)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XChannel, XTargetID;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != ':' ||
- XChannel >= Controller->Channels)
- return false;
- UserCommandString = ++NewUserCommandString;
- XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XTargetID >= Controller->Targets)
- return false;
- *Channel = XChannel;
- *TargetID = XTargetID;
- return true;
-}
-
-
-/*
- DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number
- specification from a User Command string. It updates LogicalDriveNumber and
- returns true on success and false on failure.
-*/
-
-static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller,
- char *UserCommandString,
- unsigned char *LogicalDriveNumber)
-{
- char *NewUserCommandString = UserCommandString;
- unsigned long XLogicalDriveNumber;
- while (*UserCommandString == ' ') UserCommandString++;
- if (UserCommandString == NewUserCommandString)
- return false;
- XLogicalDriveNumber =
- simple_strtoul(UserCommandString, &NewUserCommandString, 10);
- if (NewUserCommandString == UserCommandString ||
- *NewUserCommandString != '\0' ||
- XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1)
- return false;
- *LogicalDriveNumber = XLogicalDriveNumber;
- return true;
-}
-
-
-/*
- DAC960_V1_SetDeviceState sets the Device State for a Physical Device for
- DAC960 V1 Firmware Controllers.
-*/
-
-static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller,
- DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- DAC960_V1_PhysicalDeviceState_T
- DeviceState,
- const unsigned char *DeviceStateString)
-{
- DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox;
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- CommandMailbox->Type3D.DeviceState = DeviceState;
- CommandMailbox->Type3D.Modifier = 0;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_UnableToStartDevice:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unable to Start Device\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_NoDeviceAtAddress:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "No Device at Address\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_InvalidChannelOrTargetOrModifier:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Invalid Channel or Target or Modifier\n",
- Controller, DeviceStateString, Channel, TargetID);
- break;
- case DAC960_V1_ChannelBusy:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Channel Busy\n", Controller,
- DeviceStateString, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("%s of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- DeviceStateString, Channel, TargetID,
- Command->V1.CommandStatus);
- break;
- }
-}
-
-
-/*
- DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware
- Controllers.
-*/
-
-static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V1_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V1.CommandMailbox;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState != DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Dead, "Kill");
- else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Online, "Make Online");
- else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
-
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID))
- {
- DAC960_V1_DeviceState_T *DeviceState =
- &Controller->V1.DeviceState[Channel][TargetID];
- if (DeviceState->Present &&
- DeviceState->DeviceType == DAC960_V1_DiskType &&
- DeviceState->DeviceState == DAC960_V1_Device_Dead)
- DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID,
- DAC960_V1_Device_Standby, "Make Standby");
- else DAC960_UserCritical("Make Standby of Physical "
- "Device %d:%d Illegal\n",
- Controller, Channel, TargetID);
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID))
- {
- CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync;
- CommandMailbox->Type3D.Channel = Channel;
- CommandMailbox->Type3D.TargetID = TargetID;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_AttemptToRebuildOnlineDrive:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Attempt to Rebuild Online or "
- "Unresponsive Drive\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_NewDiskFailedDuringRebuild:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "New Disk Failed During Rebuild\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_InvalidDeviceAddress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Invalid Device Address\n",
- Controller, Channel, TargetID);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Rebuild or Consistency Check Already "
- "in Progress\n", Controller, Channel, TargetID);
- break;
- default:
- DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - "
- "Unexpected Status %04X\n", Controller,
- Channel, TargetID, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync;
- CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber;
- CommandMailbox->Type3C.AutoRestore = true;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Initiated\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_DependentDiskIsDead:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Dependent Physical Device is DEAD\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_InvalidOrNonredundantLogicalDrive:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Invalid or Nonredundant Logical Drive\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- case DAC960_V1_RebuildOrCheckAlreadyInProgress:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - Rebuild or "
- "Consistency Check Already in Progress\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber);
- break;
- default:
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) Failed - "
- "Unexpected Status %04X\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber, Command->V1.CommandStatus);
- break;
- }
- }
- else if (strcmp(UserCommand, "cancel-rebuild") == 0 ||
- strcmp(UserCommand, "cancel-consistency-check") == 0)
- {
- /*
- the OldRebuildRateConstant is never actually used
- once its value is retrieved from the controller.
- */
- unsigned char *OldRebuildRateConstant;
- dma_addr_t OldRebuildRateConstantDMA;
-
- OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice,
- sizeof(char), &OldRebuildRateConstantDMA);
- if (OldRebuildRateConstant == NULL) {
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Out of Memory",
- Controller);
- goto failure;
- }
- CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl;
- CommandMailbox->Type3R.RebuildRateConstant = 0xFF;
- CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA;
- DAC960_ExecuteCommand(Command);
- switch (Command->V1.CommandStatus)
- {
- case DAC960_V1_NormalCompletion:
- DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n",
- Controller);
- break;
- default:
- DAC960_UserCritical("Cancellation of Rebuild or "
- "Consistency Check Failed - "
- "Unexpected Status %04X\n",
- Controller, Command->V1.CommandStatus);
- break;
- }
-failure:
- pci_free_consistent(Controller->PCIDevice, sizeof(char),
- OldRebuildRateConstant, OldRebuildRateConstantDMA);
- }
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-
-/*
- DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and
- TargetID into a Logical Device. It returns true on success and false
- on failure.
-*/
-
-static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command,
- unsigned char Channel,
- unsigned char TargetID,
- unsigned short
- *LogicalDeviceNumber)
-{
- DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox;
- DAC960_Controller_T *Controller = Command->Controller;
-
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(&SavedCommandMailbox, CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
-
- CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->PhysicalDeviceInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->PhysicalDeviceInfo.DataTransferSize =
- sizeof(DAC960_V2_PhysicalToLogicalDevice_T);
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID;
- CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel;
- CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_TranslatePhysicalToLogicalDevice;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.PhysicalToLogicalDeviceDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
-
- DAC960_ExecuteCommand(Command);
- *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber;
-
- memcpy(CommandMailbox, &SavedCommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion);
-}
-
-
-/*
- DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware
- Controllers.
-*/
-
-static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller,
- unsigned char *UserCommand)
-{
- DAC960_Command_T *Command;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- unsigned long flags;
- unsigned char Channel, TargetID, LogicalDriveNumber;
- unsigned short LogicalDeviceNumber;
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- Controller->UserStatusLength = 0;
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true;
- CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true;
- if (strcmp(UserCommand, "flush-cache") == 0)
- {
- CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice;
- CommandMailbox->DeviceOperation.OperationDevice =
- DAC960_V2_RAID_Controller;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Cache Flush Completed\n", Controller);
- }
- else if (strncmp(UserCommand, "kill", 4) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[4],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Dead;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Kill of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-online", 11) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[11],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Online;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "make-standby", 12) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[12],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->SetDeviceState.IOCTL_Opcode =
- DAC960_V2_SetDeviceState;
- CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState =
- DAC960_V2_Device_Standby;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Succeeded" : "Failed"));
- }
- else if (strncmp(UserCommand, "rebuild", 7) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[7],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStart;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 &&
- DAC960_ParsePhysicalDevice(Controller, &UserCommand[14],
- &Channel, &TargetID) &&
- DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID,
- &LogicalDeviceNumber))
- {
- CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber =
- LogicalDeviceNumber;
- CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode =
- DAC960_V2_RebuildDeviceStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n",
- Controller, Channel, TargetID,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strncmp(UserCommand, "check-consistency", 17) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[17],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStart;
- CommandMailbox->ConsistencyCheck.RestoreConsistency = true;
- CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- }
- else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 &&
- DAC960_ParseLogicalDrive(Controller, &UserCommand[24],
- &LogicalDriveNumber))
- {
- CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber =
- LogicalDriveNumber;
- CommandMailbox->ConsistencyCheck.IOCTL_Opcode =
- DAC960_V2_ConsistencyCheckStop;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Consistency Check of Logical Drive %d "
- "(/dev/rd/c%dd%d) %s\n",
- Controller, LogicalDriveNumber,
- Controller->ControllerNumber,
- LogicalDriveNumber,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Cancelled" : "Not Cancelled"));
- }
- else if (strcmp(UserCommand, "perform-discovery") == 0)
- {
- CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery;
- DAC960_ExecuteCommand(Command);
- DAC960_UserCritical("Discovery %s\n", Controller,
- (Command->V2.CommandStatus
- == DAC960_V2_NormalCompletion
- ? "Initiated" : "Not Initiated"));
- if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion)
- {
- CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL;
- CommandMailbox->ControllerInfo.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->ControllerInfo.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->ControllerInfo.DataTransferSize =
- sizeof(DAC960_V2_ControllerInfo_T);
- CommandMailbox->ControllerInfo.ControllerNumber = 0;
- CommandMailbox->ControllerInfo.IOCTL_Opcode =
- DAC960_V2_GetControllerInfo;
- /*
- * How does this NOT race with the queued Monitoring
- * usage of this structure?
- */
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer =
- Controller->V2.NewControllerInformationDMA;
- CommandMailbox->ControllerInfo.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->ControllerInfo.DataTransferSize;
- while (1) {
- DAC960_ExecuteCommand(Command);
- if (!Controller->V2.NewControllerInformation->PhysicalScanActive)
- break;
- msleep(1000);
- }
- DAC960_UserCritical("Discovery Completed\n", Controller);
- }
- }
- else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0)
- Controller->SuppressEnclosureMessages = true;
- else DAC960_UserCritical("Illegal User Command: '%s'\n",
- Controller, UserCommand);
-
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- return true;
-}
-
-static int __maybe_unused dac960_proc_show(struct seq_file *m, void *v)
-{
- unsigned char *StatusMessage = "OK\n";
- int ControllerNumber;
- for (ControllerNumber = 0;
- ControllerNumber < DAC960_ControllerCount;
- ControllerNumber++)
- {
- DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL) continue;
- if (Controller->MonitoringAlertMode)
- {
- StatusMessage = "ALERT\n";
- break;
- }
- }
- seq_puts(m, StatusMessage);
- return 0;
-}
-
-static int __maybe_unused dac960_initial_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
- seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
- return 0;
-}
-
-static int __maybe_unused dac960_current_status_proc_show(struct seq_file *m,
- void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
- unsigned char *StatusMessage =
- "No Rebuild or Consistency Check in Progress\n";
- int ProgressMessageLength = strlen(StatusMessage);
- if (jiffies != Controller->LastCurrentStatusTime)
- {
- Controller->CurrentStatusLength = 0;
- DAC960_AnnounceDriver(Controller);
- DAC960_ReportControllerConfiguration(Controller);
- DAC960_ReportDeviceConfiguration(Controller);
- if (Controller->ProgressBufferLength > 0)
- ProgressMessageLength = Controller->ProgressBufferLength;
- if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength))
- {
- unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer;
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' ';
- if (Controller->ProgressBufferLength > 0)
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- Controller->ProgressBuffer);
- else
- strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength],
- StatusMessage);
- Controller->CurrentStatusLength += ProgressMessageLength;
- }
- Controller->LastCurrentStatusTime = jiffies;
- }
- seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_show(struct seq_file *m, void *v)
-{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
-
- seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
- return 0;
-}
-
-static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, dac960_user_command_proc_show, PDE_DATA(inode));
-}
-
-static ssize_t dac960_user_command_proc_write(struct file *file,
- const char __user *Buffer,
- size_t Count, loff_t *pos)
-{
- DAC960_Controller_T *Controller = PDE_DATA(file_inode(file));
- unsigned char CommandBuffer[80];
- int Length;
- if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
- if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT;
- CommandBuffer[Count] = '\0';
- Length = strlen(CommandBuffer);
- if (Length > 0 && CommandBuffer[Length-1] == '\n')
- CommandBuffer[--Length] = '\0';
- if (Controller->FirmwareType == DAC960_V1_Controller)
- return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
- else
- return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer)
- ? Count : -EBUSY);
-}
-
-static const struct file_operations dac960_user_command_proc_fops = {
- .owner = THIS_MODULE,
- .open = dac960_user_command_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = dac960_user_command_proc_write,
-};
-
-/*
- DAC960_CreateProcEntries creates the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller)
-{
- struct proc_dir_entry *ControllerProcEntry;
-
- if (DAC960_ProcDirectoryEntry == NULL) {
- DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
- proc_create_single("status", 0, DAC960_ProcDirectoryEntry,
- dac960_proc_show);
- }
-
- snprintf(Controller->ControllerName, sizeof(Controller->ControllerName),
- "c%d", Controller->ControllerNumber);
- ControllerProcEntry = proc_mkdir(Controller->ControllerName,
- DAC960_ProcDirectoryEntry);
- proc_create_single_data("initial_status", 0, ControllerProcEntry,
- dac960_initial_status_proc_show, Controller);
- proc_create_single_data("current_status", 0, ControllerProcEntry,
- dac960_current_status_proc_show, Controller);
- proc_create_data("user_command", 0600, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
- Controller->ControllerProcEntry = ControllerProcEntry;
-}
-
-
-/*
- DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the
- DAC960 Driver.
-*/
-
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller)
-{
- if (Controller->ControllerProcEntry == NULL)
- return;
- remove_proc_entry("initial_status", Controller->ControllerProcEntry);
- remove_proc_entry("current_status", Controller->ControllerProcEntry);
- remove_proc_entry("user_command", Controller->ControllerProcEntry);
- remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry);
- Controller->ControllerProcEntry = NULL;
-}
-
-#ifdef DAC960_GAM_MINOR
-
-static long DAC960_gam_get_controller_info(DAC960_ControllerInfo_T __user *UserSpaceControllerInfo)
-{
- DAC960_ControllerInfo_T ControllerInfo;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceControllerInfo == NULL)
- ErrorCode = -EINVAL;
- else ErrorCode = get_user(ControllerNumber,
- &UserSpaceControllerInfo->ControllerNumber);
- if (ErrorCode != 0)
- goto out;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1) {
- goto out;
- }
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T));
- ControllerInfo.ControllerNumber = ControllerNumber;
- ControllerInfo.FirmwareType = Controller->FirmwareType;
- ControllerInfo.Channels = Controller->Channels;
- ControllerInfo.Targets = Controller->Targets;
- ControllerInfo.PCI_Bus = Controller->Bus;
- ControllerInfo.PCI_Device = Controller->Device;
- ControllerInfo.PCI_Function = Controller->Function;
- ControllerInfo.IRQ_Channel = Controller->IRQ_Channel;
- ControllerInfo.PCI_Address = Controller->PCI_Address;
- strcpy(ControllerInfo.ModelName, Controller->ModelName);
- strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion);
- ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo,
- sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v1_execute_command(DAC960_V1_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V1_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V1_CommandOpcode_T CommandOpcode;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_DCDB_T DCDB;
- DAC960_V1_DCDB_T *DCDB_IOBUF = NULL;
- dma_addr_t DCDB_IOBUFDMA;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- long ErrorCode;
-
- if (UserSpaceUserCommand == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V1_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ControllerNumber = UserCommand.ControllerNumber;
- ErrorCode = -ENXIO;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- ErrorCode = -EINVAL;
- if (Controller->FirmwareType != DAC960_V1_Controller)
- goto out;
- CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode;
- DataTransferLength = UserCommand.DataTransferLength;
- if (CommandOpcode & 0x80)
- goto out;
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- if (copy_from_user(&DCDB, UserCommand.DCDB,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- if (DCDB.Channel >= DAC960_V1_MaxChannels)
- goto out;
- if (!((DataTransferLength == 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_NoDataTransfer) ||
- (DataTransferLength > 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferDeviceToSystem) ||
- (DataTransferLength < 0 &&
- DCDB.Direction
- == DAC960_V1_DCDB_DataTransferSystemToDevice)))
- goto out;
- if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength)
- != abs(DataTransferLength))
- goto out;
- DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice,
- sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA);
- if (DCDB_IOBUF == NULL) {
- ErrorCode = -ENOMEM;
- goto out;
- }
- }
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto out;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- while (Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID])
- {
- spin_unlock_irq(&Controller->queue_lock);
- __wait_event(Controller->CommandWaitQueue,
- !Controller->V1.DirectCommandActive
- [DCDB.Channel][DCDB.TargetID]);
- spin_lock_irq(&Controller->queue_lock);
- }
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = true;
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA;
- DCDB.BusAddress = DataTransferBufferDMA;
- memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T));
- }
- else
- {
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V1_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V1_CommandMailbox_T));
- if (DataTransferBuffer != NULL)
- Command->V1.CommandMailbox.Type3.BusAddress =
- DataTransferBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V1.CommandStatus;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- if (CommandOpcode == DAC960_V1_DCDB)
- {
- /*
- I don't believe Target or Channel in the DCDB_IOBUF
- should be any different from the contents of DCDB.
- */
- Controller->V1.DirectCommandActive[DCDB.Channel]
- [DCDB.TargetID] = false;
- if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF,
- sizeof(DAC960_V1_DCDB_T))) {
- ErrorCode = -EFAULT;
- goto Failure1;
- }
- }
- ErrorCode = CommandStatus;
- Failure1:
- if (DataTransferBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (DCDB_IOBUF != NULL)
- pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T),
- DCDB_IOBUF, DCDB_IOBUFDMA);
- out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_execute_command(DAC960_V2_UserCommand_T __user *UserSpaceUserCommand)
-{
- DAC960_V2_UserCommand_T UserCommand;
- DAC960_Controller_T *Controller;
- DAC960_Command_T *Command = NULL;
- DAC960_V2_CommandMailbox_T *CommandMailbox;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned long flags;
- int ControllerNumber, DataTransferLength;
- int DataTransferResidue, RequestSenseLength;
- unsigned char *DataTransferBuffer = NULL;
- dma_addr_t DataTransferBufferDMA;
- unsigned char *RequestSenseBuffer = NULL;
- dma_addr_t RequestSenseBufferDMA;
- long ErrorCode = -EINVAL;
-
- if (UserSpaceUserCommand == NULL)
- goto out;
- if (copy_from_user(&UserCommand, UserSpaceUserCommand,
- sizeof(DAC960_V2_UserCommand_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = UserCommand.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller){
- ErrorCode = -EINVAL;
- goto out;
- }
- DataTransferLength = UserCommand.DataTransferLength;
- ErrorCode = -ENOMEM;
- if (DataTransferLength > 0)
- {
- DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- DataTransferLength,
- &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- }
- else if (DataTransferLength < 0)
- {
- DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice,
- -DataTransferLength, &DataTransferBufferDMA);
- if (DataTransferBuffer == NULL)
- goto out;
- if (copy_from_user(DataTransferBuffer,
- UserCommand.DataTransferBuffer,
- -DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (RequestSenseLength > 0)
- {
- RequestSenseBuffer = pci_zalloc_consistent(Controller->PCIDevice,
- RequestSenseLength,
- &RequestSenseBufferDMA);
- if (RequestSenseBuffer == NULL)
- {
- ErrorCode = -ENOMEM;
- goto Failure2;
- }
- }
- spin_lock_irqsave(&Controller->queue_lock, flags);
- while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
- DAC960_WaitForCommand(Controller);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- DAC960_V2_ClearCommand(Command);
- Command->CommandType = DAC960_ImmediateCommand;
- CommandMailbox = &Command->V2.CommandMailbox;
- memcpy(CommandMailbox, &UserCommand.CommandMailbox,
- sizeof(DAC960_V2_CommandMailbox_T));
- CommandMailbox->Common.CommandControlBits
- .AdditionalScatterGatherListMemory = false;
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = true;
- CommandMailbox->Common.DataTransferSize = 0;
- CommandMailbox->Common.DataTransferPageNumber = 0;
- memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0,
- sizeof(DAC960_V2_DataTransferMemoryAddress_T));
- if (DataTransferLength != 0)
- {
- if (DataTransferLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = true;
- CommandMailbox->Common.DataTransferSize = DataTransferLength;
- }
- else
- {
- CommandMailbox->Common.CommandControlBits
- .DataTransferControllerToHost = false;
- CommandMailbox->Common.DataTransferSize = -DataTransferLength;
- }
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentDataPointer = DataTransferBufferDMA;
- CommandMailbox->Common.DataTransferMemoryAddress
- .ScatterGatherSegments[0]
- .SegmentByteCount =
- CommandMailbox->Common.DataTransferSize;
- }
- if (RequestSenseLength > 0)
- {
- CommandMailbox->Common.CommandControlBits
- .NoAutoRequestSense = false;
- CommandMailbox->Common.RequestSenseSize = RequestSenseLength;
- CommandMailbox->Common.RequestSenseBusAddress =
- RequestSenseBufferDMA;
- }
- DAC960_ExecuteCommand(Command);
- CommandStatus = Command->V2.CommandStatus;
- RequestSenseLength = Command->V2.RequestSenseLength;
- DataTransferResidue = Command->V2.DataTransferResidue;
- spin_lock_irqsave(&Controller->queue_lock, flags);
- DAC960_DeallocateCommand(Command);
- spin_unlock_irqrestore(&Controller->queue_lock, flags);
- if (RequestSenseLength > UserCommand.RequestSenseLength)
- RequestSenseLength = UserCommand.RequestSenseLength;
- if (copy_to_user(&UserSpaceUserCommand->DataTransferLength,
- &DataTransferResidue,
- sizeof(DataTransferResidue))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength,
- &RequestSenseLength, sizeof(RequestSenseLength))) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- if (DataTransferLength > 0)
- {
- if (copy_to_user(UserCommand.DataTransferBuffer,
- DataTransferBuffer, DataTransferLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- if (RequestSenseLength > 0)
- {
- if (copy_to_user(UserCommand.RequestSenseBuffer,
- RequestSenseBuffer, RequestSenseLength)) {
- ErrorCode = -EFAULT;
- goto Failure2;
- }
- }
- ErrorCode = CommandStatus;
- Failure2:
- pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength),
- DataTransferBuffer, DataTransferBufferDMA);
- if (RequestSenseBuffer != NULL)
- pci_free_consistent(Controller->PCIDevice, RequestSenseLength,
- RequestSenseBuffer, RequestSenseBufferDMA);
-out:
- return ErrorCode;
-}
-
-static long DAC960_gam_v2_get_health_status(DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus)
-{
- DAC960_V2_GetHealthStatus_T GetHealthStatus;
- DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer;
- DAC960_Controller_T *Controller;
- int ControllerNumber;
- long ErrorCode;
-
- if (UserSpaceGetHealthStatus == NULL) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus,
- sizeof(DAC960_V2_GetHealthStatus_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = -ENXIO;
- ControllerNumber = GetHealthStatus.ControllerNumber;
- if (ControllerNumber < 0 ||
- ControllerNumber > DAC960_ControllerCount - 1)
- goto out;
- Controller = DAC960_Controllers[ControllerNumber];
- if (Controller == NULL)
- goto out;
- if (Controller->FirmwareType != DAC960_V2_Controller) {
- ErrorCode = -EINVAL;
- goto out;
- }
- if (copy_from_user(&HealthStatusBuffer,
- GetHealthStatus.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T))) {
- ErrorCode = -EFAULT;
- goto out;
- }
- ErrorCode = wait_event_interruptible_timeout(Controller->HealthStatusWaitQueue,
- !(Controller->V2.HealthStatusBuffer->StatusChangeCounter
- == HealthStatusBuffer.StatusChangeCounter &&
- Controller->V2.HealthStatusBuffer->NextEventSequenceNumber
- == HealthStatusBuffer.NextEventSequenceNumber),
- DAC960_MonitoringTimerInterval);
- if (ErrorCode == -ERESTARTSYS) {
- ErrorCode = -EINTR;
- goto out;
- }
- if (copy_to_user(GetHealthStatus.HealthStatusBuffer,
- Controller->V2.HealthStatusBuffer,
- sizeof(DAC960_V2_HealthStatusBuffer_T)))
- ErrorCode = -EFAULT;
- else
- ErrorCode = 0;
-
-out:
- return ErrorCode;
-}
-
-/*
- * DAC960_gam_ioctl is the ioctl function for performing RAID operations.
-*/
-
-static long DAC960_gam_ioctl(struct file *file, unsigned int Request,
- unsigned long Argument)
-{
- long ErrorCode = 0;
- void __user *argp = (void __user *)Argument;
- if (!capable(CAP_SYS_ADMIN)) return -EACCES;
-
- mutex_lock(&DAC960_mutex);
- switch (Request)
- {
- case DAC960_IOCTL_GET_CONTROLLER_COUNT:
- ErrorCode = DAC960_ControllerCount;
- break;
- case DAC960_IOCTL_GET_CONTROLLER_INFO:
- ErrorCode = DAC960_gam_get_controller_info(argp);
- break;
- case DAC960_IOCTL_V1_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v1_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_EXECUTE_COMMAND:
- ErrorCode = DAC960_gam_v2_execute_command(argp);
- break;
- case DAC960_IOCTL_V2_GET_HEALTH_STATUS:
- ErrorCode = DAC960_gam_v2_get_health_status(argp);
- break;
- default:
- ErrorCode = -ENOTTY;
- }
- mutex_unlock(&DAC960_mutex);
- return ErrorCode;
-}
-
-static const struct file_operations DAC960_gam_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = DAC960_gam_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice DAC960_gam_dev = {
- DAC960_GAM_MINOR,
- "dac960_gam",
- &DAC960_gam_fops
-};
-
-static int DAC960_gam_init(void)
-{
- int ret;
-
- ret = misc_register(&DAC960_gam_dev);
- if (ret)
- printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR);
- return ret;
-}
-
-static void DAC960_gam_cleanup(void)
-{
- misc_deregister(&DAC960_gam_dev);
-}
-
-#endif /* DAC960_GAM_MINOR */
-
-static struct DAC960_privdata DAC960_GEM_privdata = {
- .HardwareType = DAC960_GEM_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_GEM_InterruptHandler,
- .MemoryWindowSize = DAC960_GEM_RegisterWindowSize,
-};
-
-
-static struct DAC960_privdata DAC960_BA_privdata = {
- .HardwareType = DAC960_BA_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_BA_InterruptHandler,
- .MemoryWindowSize = DAC960_BA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LP_privdata = {
- .HardwareType = DAC960_LP_Controller,
- .FirmwareType = DAC960_V2_Controller,
- .InterruptHandler = DAC960_LP_InterruptHandler,
- .MemoryWindowSize = DAC960_LP_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_LA_privdata = {
- .HardwareType = DAC960_LA_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_LA_InterruptHandler,
- .MemoryWindowSize = DAC960_LA_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PG_privdata = {
- .HardwareType = DAC960_PG_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PG_InterruptHandler,
- .MemoryWindowSize = DAC960_PG_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_PD_privdata = {
- .HardwareType = DAC960_PD_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_PD_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static struct DAC960_privdata DAC960_P_privdata = {
- .HardwareType = DAC960_P_Controller,
- .FirmwareType = DAC960_V1_Controller,
- .InterruptHandler = DAC960_P_InterruptHandler,
- .MemoryWindowSize = DAC960_PD_RegisterWindowSize,
-};
-
-static const struct pci_device_id DAC960_id_table[] = {
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_GEM,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_GEM_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_BA,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_BA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_LP,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_LP_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_DEC,
- .device = PCI_DEVICE_ID_DEC_21285,
- .subvendor = PCI_VENDOR_ID_MYLEX,
- .subdevice = PCI_DEVICE_ID_MYLEX_DAC960_LA,
- .driver_data = (unsigned long) &DAC960_LA_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PG,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PG_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_PD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_PD_privdata,
- },
- {
- .vendor = PCI_VENDOR_ID_MYLEX,
- .device = PCI_DEVICE_ID_MYLEX_DAC960_P,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = (unsigned long) &DAC960_P_privdata,
- },
- {0, },
-};
-
-MODULE_DEVICE_TABLE(pci, DAC960_id_table);
-
-static struct pci_driver DAC960_pci_driver = {
- .name = "DAC960",
- .id_table = DAC960_id_table,
- .probe = DAC960_Probe,
- .remove = DAC960_Remove,
-};
-
-static int __init DAC960_init_module(void)
-{
- int ret;
-
- ret = pci_register_driver(&DAC960_pci_driver);
-#ifdef DAC960_GAM_MINOR
- if (!ret)
- DAC960_gam_init();
-#endif
- return ret;
-}
-
-static void __exit DAC960_cleanup_module(void)
-{
- int i;
-
-#ifdef DAC960_GAM_MINOR
- DAC960_gam_cleanup();
-#endif
-
- for (i = 0; i < DAC960_ControllerCount; i++) {
- DAC960_Controller_T *Controller = DAC960_Controllers[i];
- if (Controller == NULL)
- continue;
- DAC960_FinalizeController(Controller);
- }
- if (DAC960_ProcDirectoryEntry != NULL) {
- remove_proc_entry("rd/status", NULL);
- remove_proc_entry("rd", NULL);
- }
- DAC960_ControllerCount = 0;
- pci_unregister_driver(&DAC960_pci_driver);
-}
-
-module_init(DAC960_init_module);
-module_exit(DAC960_cleanup_module);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h
deleted file mode 100644
index 1439e651928b..000000000000
--- a/drivers/block/DAC960.h
+++ /dev/null
@@ -1,4414 +0,0 @@
-/*
-
- Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers
-
- Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
-
- This program is free software; you may redistribute and/or modify it under
- the terms of the GNU General Public License Version 2 as published by the
- Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- for complete details.
-
- The author respectfully requests that any modifications to this software be
- sent directly to him for evaluation and testing.
-
-*/
-
-
-/*
- Define the maximum number of DAC960 Controllers supported by this driver.
-*/
-
-#define DAC960_MaxControllers 8
-
-
-/*
- Define the maximum number of Controller Channels supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxChannels 3
-#define DAC960_V2_MaxChannels 4
-
-
-/*
- Define the maximum number of Targets per Channel supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxTargets 16
-#define DAC960_V2_MaxTargets 128
-
-
-/*
- Define the maximum number of Logical Drives supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxLogicalDrives 32
-
-
-/*
- Define the maximum number of Physical Devices supported by DAC960
- V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_V1_MaxPhysicalDevices 45
-#define DAC960_V2_MaxPhysicalDevices 272
-
-/*
- Define a 32/64 bit I/O Address data type.
-*/
-
-typedef unsigned long DAC960_IO_Address_T;
-
-
-/*
- Define a 32/64 bit PCI Bus Address data type.
-*/
-
-typedef unsigned long DAC960_PCI_Address_T;
-
-
-/*
- Define a 32 bit Bus Address data type.
-*/
-
-typedef unsigned int DAC960_BusAddress32_T;
-
-
-/*
- Define a 64 bit Bus Address data type.
-*/
-
-typedef unsigned long long DAC960_BusAddress64_T;
-
-
-/*
- Define a 32 bit Byte Count data type.
-*/
-
-typedef unsigned int DAC960_ByteCount32_T;
-
-
-/*
- Define a 64 bit Byte Count data type.
-*/
-
-typedef unsigned long long DAC960_ByteCount64_T;
-
-
-/*
- dma_loaf is used by helper routines to divide a region of
- dma mapped memory into smaller pieces, where those pieces
- are not of uniform size.
- */
-
-struct dma_loaf {
- void *cpu_base;
- dma_addr_t dma_base;
- size_t length;
- void *cpu_free;
- dma_addr_t dma_free;
-};
-
-/*
- Define the SCSI INQUIRY Standard Data structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */
- bool RMB:1; /* Byte 1 Bit 7 */
- unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */
- unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */
- unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */
- unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */
- unsigned char :2; /* Byte 3 Bits 4-5 */
- bool TrmIOP:1; /* Byte 3 Bit 6 */
- bool AENC:1; /* Byte 3 Bit 7 */
- unsigned char AdditionalLength; /* Byte 4 */
- unsigned char :8; /* Byte 5 */
- unsigned char :8; /* Byte 6 */
- bool SftRe:1; /* Byte 7 Bit 0 */
- bool CmdQue:1; /* Byte 7 Bit 1 */
- bool :1; /* Byte 7 Bit 2 */
- bool Linked:1; /* Byte 7 Bit 3 */
- bool Sync:1; /* Byte 7 Bit 4 */
- bool WBus16:1; /* Byte 7 Bit 5 */
- bool WBus32:1; /* Byte 7 Bit 6 */
- bool RelAdr:1; /* Byte 7 Bit 7 */
- unsigned char VendorIdentification[8]; /* Bytes 8-15 */
- unsigned char ProductIdentification[16]; /* Bytes 16-31 */
- unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */
-}
-DAC960_SCSI_Inquiry_T;
-
-
-/*
- Define the SCSI INQUIRY Unit Serial Number structure.
-*/
-
-typedef struct DAC960_SCSI_Inquiry_UnitSerialNumber
-{
- unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */
- unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */
- unsigned char PageCode; /* Byte 1 */
- unsigned char :8; /* Byte 2 */
- unsigned char PageLength; /* Byte 3 */
- unsigned char ProductSerialNumber[28]; /* Bytes 4-31 */
-}
-DAC960_SCSI_Inquiry_UnitSerialNumber_T;
-
-
-/*
- Define the SCSI REQUEST SENSE Sense Key type.
-*/
-
-typedef enum
-{
- DAC960_SenseKey_NoSense = 0x0,
- DAC960_SenseKey_RecoveredError = 0x1,
- DAC960_SenseKey_NotReady = 0x2,
- DAC960_SenseKey_MediumError = 0x3,
- DAC960_SenseKey_HardwareError = 0x4,
- DAC960_SenseKey_IllegalRequest = 0x5,
- DAC960_SenseKey_UnitAttention = 0x6,
- DAC960_SenseKey_DataProtect = 0x7,
- DAC960_SenseKey_BlankCheck = 0x8,
- DAC960_SenseKey_VendorSpecific = 0x9,
- DAC960_SenseKey_CopyAborted = 0xA,
- DAC960_SenseKey_AbortedCommand = 0xB,
- DAC960_SenseKey_Equal = 0xC,
- DAC960_SenseKey_VolumeOverflow = 0xD,
- DAC960_SenseKey_Miscompare = 0xE,
- DAC960_SenseKey_Reserved = 0xF
-}
-__attribute__ ((packed))
-DAC960_SCSI_RequestSenseKey_T;
-
-
-/*
- Define the SCSI REQUEST SENSE structure.
-*/
-
-typedef struct DAC960_SCSI_RequestSense
-{
- unsigned char ErrorCode:7; /* Byte 0 Bits 0-6 */
- bool Valid:1; /* Byte 0 Bit 7 */
- unsigned char SegmentNumber; /* Byte 1 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 2 Bits 0-3 */
- unsigned char :1; /* Byte 2 Bit 4 */
- bool ILI:1; /* Byte 2 Bit 5 */
- bool EOM:1; /* Byte 2 Bit 6 */
- bool Filemark:1; /* Byte 2 Bit 7 */
- unsigned char Information[4]; /* Bytes 3-6 */
- unsigned char AdditionalSenseLength; /* Byte 7 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 8-11 */
- unsigned char AdditionalSenseCode; /* Byte 12 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 13 */
-}
-DAC960_SCSI_RequestSense_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- /* I/O Commands */
- DAC960_V1_ReadExtended = 0x33,
- DAC960_V1_WriteExtended = 0x34,
- DAC960_V1_ReadAheadExtended = 0x35,
- DAC960_V1_ReadExtendedWithScatterGather = 0xB3,
- DAC960_V1_WriteExtendedWithScatterGather = 0xB4,
- DAC960_V1_Read = 0x36,
- DAC960_V1_ReadWithScatterGather = 0xB6,
- DAC960_V1_Write = 0x37,
- DAC960_V1_WriteWithScatterGather = 0xB7,
- DAC960_V1_DCDB = 0x04,
- DAC960_V1_DCDBWithScatterGather = 0x84,
- DAC960_V1_Flush = 0x0A,
- /* Controller Status Related Commands */
- DAC960_V1_Enquiry = 0x53,
- DAC960_V1_Enquiry2 = 0x1C,
- DAC960_V1_GetLogicalDriveElement = 0x55,
- DAC960_V1_GetLogicalDriveInformation = 0x19,
- DAC960_V1_IOPortRead = 0x39,
- DAC960_V1_IOPortWrite = 0x3A,
- DAC960_V1_GetSDStats = 0x3E,
- DAC960_V1_GetPDStats = 0x3F,
- DAC960_V1_PerformEventLogOperation = 0x72,
- /* Device Related Commands */
- DAC960_V1_StartDevice = 0x10,
- DAC960_V1_GetDeviceState = 0x50,
- DAC960_V1_StopChannel = 0x13,
- DAC960_V1_StartChannel = 0x12,
- DAC960_V1_ResetChannel = 0x1A,
- /* Commands Associated with Data Consistency and Errors */
- DAC960_V1_Rebuild = 0x09,
- DAC960_V1_RebuildAsync = 0x16,
- DAC960_V1_CheckConsistency = 0x0F,
- DAC960_V1_CheckConsistencyAsync = 0x1E,
- DAC960_V1_RebuildStat = 0x0C,
- DAC960_V1_GetRebuildProgress = 0x27,
- DAC960_V1_RebuildControl = 0x1F,
- DAC960_V1_ReadBadBlockTable = 0x0B,
- DAC960_V1_ReadBadDataTable = 0x25,
- DAC960_V1_ClearBadDataTable = 0x26,
- DAC960_V1_GetErrorTable = 0x17,
- DAC960_V1_AddCapacityAsync = 0x2A,
- DAC960_V1_BackgroundInitializationControl = 0x2B,
- /* Configuration Related Commands */
- DAC960_V1_ReadConfig2 = 0x3D,
- DAC960_V1_WriteConfig2 = 0x3C,
- DAC960_V1_ReadConfigurationOnDisk = 0x4A,
- DAC960_V1_WriteConfigurationOnDisk = 0x4B,
- DAC960_V1_ReadConfiguration = 0x4E,
- DAC960_V1_ReadBackupConfiguration = 0x4D,
- DAC960_V1_WriteConfiguration = 0x4F,
- DAC960_V1_AddConfiguration = 0x4C,
- DAC960_V1_ReadConfigurationLabel = 0x48,
- DAC960_V1_WriteConfigurationLabel = 0x49,
- /* Firmware Upgrade Related Commands */
- DAC960_V1_LoadImage = 0x20,
- DAC960_V1_StoreImage = 0x21,
- DAC960_V1_ProgramImage = 0x22,
- /* Diagnostic Commands */
- DAC960_V1_SetDiagnosticMode = 0x31,
- DAC960_V1_RunDiagnostic = 0x32,
- /* Subsystem Service Commands */
- DAC960_V1_GetSubsystemData = 0x70,
- DAC960_V1_SetSubsystemParameters = 0x71,
- /* Version 2.xx Firmware Commands */
- DAC960_V1_Enquiry_Old = 0x05,
- DAC960_V1_GetDeviceState_Old = 0x14,
- DAC960_V1_Read_Old = 0x02,
- DAC960_V1_Write_Old = 0x03,
- DAC960_V1_ReadWithScatterGather_Old = 0x82,
- DAC960_V1_WriteWithScatterGather_Old = 0x83
-}
-__attribute__ ((packed))
-DAC960_V1_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Identifier type.
-*/
-
-typedef unsigned char DAC960_V1_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V1 Firmware Command Status Codes.
-*/
-
-#define DAC960_V1_NormalCompletion 0x0000 /* Common */
-#define DAC960_V1_CheckConditionReceived 0x0002 /* Common */
-#define DAC960_V1_NoDeviceAtAddress 0x0102 /* Common */
-#define DAC960_V1_InvalidDeviceAddress 0x0105 /* Common */
-#define DAC960_V1_InvalidParameter 0x0105 /* Common */
-#define DAC960_V1_IrrecoverableDataError 0x0001 /* I/O */
-#define DAC960_V1_LogicalDriveNonexistentOrOffline 0x0002 /* I/O */
-#define DAC960_V1_AccessBeyondEndOfLogicalDrive 0x0105 /* I/O */
-#define DAC960_V1_BadDataEncountered 0x010C /* I/O */
-#define DAC960_V1_DeviceBusy 0x0008 /* DCDB */
-#define DAC960_V1_DeviceNonresponsive 0x000E /* DCDB */
-#define DAC960_V1_CommandTerminatedAbnormally 0x000F /* DCDB */
-#define DAC960_V1_UnableToStartDevice 0x0002 /* Device */
-#define DAC960_V1_InvalidChannelOrTargetOrModifier 0x0105 /* Device */
-#define DAC960_V1_ChannelBusy 0x0106 /* Device */
-#define DAC960_V1_ChannelNotStopped 0x0002 /* Device */
-#define DAC960_V1_AttemptToRebuildOnlineDrive 0x0002 /* Consistency */
-#define DAC960_V1_RebuildBadBlocksEncountered 0x0003 /* Consistency */
-#define DAC960_V1_NewDiskFailedDuringRebuild 0x0004 /* Consistency */
-#define DAC960_V1_RebuildOrCheckAlreadyInProgress 0x0106 /* Consistency */
-#define DAC960_V1_DependentDiskIsDead 0x0002 /* Consistency */
-#define DAC960_V1_InconsistentBlocksFound 0x0003 /* Consistency */
-#define DAC960_V1_InvalidOrNonredundantLogicalDrive 0x0105 /* Consistency */
-#define DAC960_V1_NoRebuildOrCheckInProgress 0x0105 /* Consistency */
-#define DAC960_V1_RebuildInProgress_DataValid 0x0000 /* Consistency */
-#define DAC960_V1_RebuildFailed_LogicalDriveFailure 0x0002 /* Consistency */
-#define DAC960_V1_RebuildFailed_BadBlocksOnOther 0x0003 /* Consistency */
-#define DAC960_V1_RebuildFailed_NewDriveFailed 0x0004 /* Consistency */
-#define DAC960_V1_RebuildSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_RebuildSuccessfullyTerminated 0x0107 /* Consistency */
-#define DAC960_V1_BackgroundInitSuccessful 0x0100 /* Consistency */
-#define DAC960_V1_BackgroundInitAborted 0x0005 /* Consistency */
-#define DAC960_V1_NoBackgroundInitInProgress 0x0105 /* Consistency */
-#define DAC960_V1_AddCapacityInProgress 0x0004 /* Consistency */
-#define DAC960_V1_AddCapacityFailedOrSuspended 0x00F4 /* Consistency */
-#define DAC960_V1_Config2ChecksumError 0x0002 /* Configuration */
-#define DAC960_V1_ConfigurationSuspended 0x0106 /* Configuration */
-#define DAC960_V1_FailedToConfigureNVRAM 0x0105 /* Configuration */
-#define DAC960_V1_ConfigurationNotSavedStateChange 0x0106 /* Configuration */
-#define DAC960_V1_SubsystemNotInstalled 0x0001 /* Subsystem */
-#define DAC960_V1_SubsystemFailed 0x0002 /* Subsystem */
-#define DAC960_V1_SubsystemBusy 0x0106 /* Subsystem */
-
-typedef unsigned short DAC960_V1_CommandStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry
-{
- unsigned char NumberOfLogicalDrives; /* Byte 0 */
- unsigned int :24; /* Bytes 1-3 */
- unsigned int LogicalDriveSizes[32]; /* Bytes 4-131 */
- unsigned short FlashAge; /* Bytes 132-133 */
- struct {
- bool DeferredWriteError:1; /* Byte 134 Bit 0 */
- bool BatteryLow:1; /* Byte 134 Bit 1 */
- unsigned char :6; /* Byte 134 Bits 2-7 */
- } StatusFlags;
- unsigned char :8; /* Byte 135 */
- unsigned char MinorFirmwareVersion; /* Byte 136 */
- unsigned char MajorFirmwareVersion; /* Byte 137 */
- enum {
- DAC960_V1_NoStandbyRebuildOrCheckInProgress = 0x00,
- DAC960_V1_StandbyRebuildInProgress = 0x01,
- DAC960_V1_BackgroundRebuildInProgress = 0x02,
- DAC960_V1_BackgroundCheckInProgress = 0x03,
- DAC960_V1_StandbyRebuildCompletedWithError = 0xFF,
- DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed = 0xF0,
- DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed = 0xF1,
- DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses = 0xF2,
- DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated = 0xF3
- } __attribute__ ((packed)) RebuildFlag; /* Byte 138 */
- unsigned char MaxCommands; /* Byte 139 */
- unsigned char OfflineLogicalDriveCount; /* Byte 140 */
- unsigned char :8; /* Byte 141 */
- unsigned short EventLogSequenceNumber; /* Bytes 142-143 */
- unsigned char CriticalLogicalDriveCount; /* Byte 144 */
- unsigned int :24; /* Bytes 145-147 */
- unsigned char DeadDriveCount; /* Byte 148 */
- unsigned char :8; /* Byte 149 */
- unsigned char RebuildCount; /* Byte 150 */
- struct {
- unsigned char :3; /* Byte 151 Bits 0-2 */
- bool BatteryBackupUnitPresent:1; /* Byte 151 Bit 3 */
- unsigned char :3; /* Byte 151 Bits 4-6 */
- unsigned char :1; /* Byte 151 Bit 7 */
- } MiscFlags;
- struct {
- unsigned char TargetID;
- unsigned char Channel;
- } DeadDrives[21]; /* Bytes 152-194 */
- unsigned char Reserved[62]; /* Bytes 195-255 */
-}
-__attribute__ ((packed))
-DAC960_V1_Enquiry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Enquiry2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Enquiry2
-{
- struct {
- enum {
- DAC960_V1_P_PD_PU = 0x01,
- DAC960_V1_PL = 0x02,
- DAC960_V1_PG = 0x10,
- DAC960_V1_PJ = 0x11,
- DAC960_V1_PR = 0x12,
- DAC960_V1_PT = 0x13,
- DAC960_V1_PTL0 = 0x14,
- DAC960_V1_PRL = 0x15,
- DAC960_V1_PTL1 = 0x16,
- DAC960_V1_1164P = 0x20
- } __attribute__ ((packed)) SubModel; /* Byte 0 */
- unsigned char ActualChannels; /* Byte 1 */
- enum {
- DAC960_V1_FiveChannelBoard = 0x01,
- DAC960_V1_ThreeChannelBoard = 0x02,
- DAC960_V1_TwoChannelBoard = 0x03,
- DAC960_V1_ThreeChannelASIC_DAC = 0x04
- } __attribute__ ((packed)) Model; /* Byte 2 */
- enum {
- DAC960_V1_EISA_Controller = 0x01,
- DAC960_V1_MicroChannel_Controller = 0x02,
- DAC960_V1_PCI_Controller = 0x03,
- DAC960_V1_SCSItoSCSI_Controller = 0x08
- } __attribute__ ((packed)) ProductFamily; /* Byte 3 */
- } HardwareID; /* Bytes 0-3 */
- /* MajorVersion.MinorVersion-FirmwareType-TurnID */
- struct {
- unsigned char MajorVersion; /* Byte 4 */
- unsigned char MinorVersion; /* Byte 5 */
- unsigned char TurnID; /* Byte 6 */
- char FirmwareType; /* Byte 7 */
- } FirmwareID; /* Bytes 4-7 */
- unsigned char :8; /* Byte 8 */
- unsigned int :24; /* Bytes 9-11 */
- unsigned char ConfiguredChannels; /* Byte 12 */
- unsigned char ActualChannels; /* Byte 13 */
- unsigned char MaxTargets; /* Byte 14 */
- unsigned char MaxTags; /* Byte 15 */
- unsigned char MaxLogicalDrives; /* Byte 16 */
- unsigned char MaxArms; /* Byte 17 */
- unsigned char MaxSpans; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int MemorySize; /* Bytes 24-27 */
- unsigned int CacheSize; /* Bytes 28-31 */
- unsigned int FlashMemorySize; /* Bytes 32-35 */
- unsigned int NonVolatileMemorySize; /* Bytes 36-39 */
- struct {
- enum {
- DAC960_V1_RamType_DRAM = 0x0,
- DAC960_V1_RamType_EDO = 0x1,
- DAC960_V1_RamType_SDRAM = 0x2,
- DAC960_V1_RamType_Last = 0x7
- } __attribute__ ((packed)) RamType:3; /* Byte 40 Bits 0-2 */
- enum {
- DAC960_V1_ErrorCorrection_None = 0x0,
- DAC960_V1_ErrorCorrection_Parity = 0x1,
- DAC960_V1_ErrorCorrection_ECC = 0x2,
- DAC960_V1_ErrorCorrection_Last = 0x7
- } __attribute__ ((packed)) ErrorCorrection:3; /* Byte 40 Bits 3-5 */
- bool FastPageMode:1; /* Byte 40 Bit 6 */
- bool LowPowerMemory:1; /* Byte 40 Bit 7 */
- unsigned char :8; /* Bytes 41 */
- } MemoryType;
- unsigned short ClockSpeed; /* Bytes 42-43 */
- unsigned short MemorySpeed; /* Bytes 44-45 */
- unsigned short HardwareSpeed; /* Bytes 46-47 */
- unsigned int :32; /* Bytes 48-51 */
- unsigned int :32; /* Bytes 52-55 */
- unsigned char :8; /* Byte 56 */
- unsigned char :8; /* Byte 57 */
- unsigned short :16; /* Bytes 58-59 */
- unsigned short MaxCommands; /* Bytes 60-61 */
- unsigned short MaxScatterGatherEntries; /* Bytes 62-63 */
- unsigned short MaxDriveCommands; /* Bytes 64-65 */
- unsigned short MaxIODescriptors; /* Bytes 66-67 */
- unsigned short MaxCombinedSectors; /* Bytes 68-69 */
- unsigned char Latency; /* Byte 70 */
- unsigned char :8; /* Byte 71 */
- unsigned char SCSITimeout; /* Byte 72 */
- unsigned char :8; /* Byte 73 */
- unsigned short MinFreeLines; /* Bytes 74-75 */
- unsigned int :32; /* Bytes 76-79 */
- unsigned int :32; /* Bytes 80-83 */
- unsigned char RebuildRateConstant; /* Byte 84 */
- unsigned char :8; /* Byte 85 */
- unsigned char :8; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
- unsigned int :32; /* Bytes 88-91 */
- unsigned int :32; /* Bytes 92-95 */
- unsigned short PhysicalDriveBlockSize; /* Bytes 96-97 */
- unsigned short LogicalDriveBlockSize; /* Bytes 98-99 */
- unsigned short MaxBlocksPerCommand; /* Bytes 100-101 */
- unsigned short BlockFactor; /* Bytes 102-103 */
- unsigned short CacheLineSize; /* Bytes 104-105 */
- struct {
- enum {
- DAC960_V1_Narrow_8bit = 0x0,
- DAC960_V1_Wide_16bit = 0x1,
- DAC960_V1_Wide_32bit = 0x2
- } __attribute__ ((packed)) BusWidth:2; /* Byte 106 Bits 0-1 */
- enum {
- DAC960_V1_Fast = 0x0,
- DAC960_V1_Ultra = 0x1,
- DAC960_V1_Ultra2 = 0x2
- } __attribute__ ((packed)) BusSpeed:2; /* Byte 106 Bits 2-3 */
- bool Differential:1; /* Byte 106 Bit 4 */
- unsigned char :3; /* Byte 106 Bits 5-7 */
- } SCSICapability;
- unsigned char :8; /* Byte 107 */
- unsigned int :32; /* Bytes 108-111 */
- unsigned short FirmwareBuildNumber; /* Bytes 112-113 */
- enum {
- DAC960_V1_AEMI = 0x01,
- DAC960_V1_OEM1 = 0x02,
- DAC960_V1_OEM2 = 0x04,
- DAC960_V1_OEM3 = 0x08,
- DAC960_V1_Conner = 0x10,
- DAC960_V1_SAFTE = 0x20
- } __attribute__ ((packed)) FaultManagementType; /* Byte 114 */
- unsigned char :8; /* Byte 115 */
- struct {
- bool Clustering:1; /* Byte 116 Bit 0 */
- bool MylexOnlineRAIDExpansion:1; /* Byte 116 Bit 1 */
- bool ReadAhead:1; /* Byte 116 Bit 2 */
- bool BackgroundInitialization:1; /* Byte 116 Bit 3 */
- unsigned int :28; /* Bytes 116-119 */
- } FirmwareFeatures;
- unsigned int :32; /* Bytes 120-123 */
- unsigned int :32; /* Bytes 124-127 */
-}
-DAC960_V1_Enquiry2_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive State type.
-*/
-
-typedef enum
-{
- DAC960_V1_LogicalDrive_Online = 0x03,
- DAC960_V1_LogicalDrive_Critical = 0x04,
- DAC960_V1_LogicalDrive_Offline = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V1_LogicalDriveState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Logical Drive Information structure.
-*/
-
-typedef struct DAC960_V1_LogicalDriveInformation
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- DAC960_V1_LogicalDriveState_T LogicalDriveState; /* Byte 4 */
- unsigned char RAIDLevel:7; /* Byte 5 Bits 0-6 */
- bool WriteBack:1; /* Byte 5 Bit 7 */
- unsigned short :16; /* Bytes 6-7 */
-}
-DAC960_V1_LogicalDriveInformation_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Logical Drive Information Command
- reply structure.
-*/
-
-typedef DAC960_V1_LogicalDriveInformation_T
- DAC960_V1_LogicalDriveInformationArray_T[DAC960_MaxLogicalDrives];
-
-
-/*
- Define the DAC960 V1 Firmware Perform Event Log Operation Types.
-*/
-
-typedef enum
-{
- DAC960_V1_GetEventLogEntry = 0x00
-}
-__attribute__ ((packed))
-DAC960_V1_PerformEventLogOpType_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Event Log Entry Command reply structure.
-*/
-
-typedef struct DAC960_V1_EventLogEntry
-{
- unsigned char MessageType; /* Byte 0 */
- unsigned char MessageLength; /* Byte 1 */
- unsigned char TargetID:5; /* Byte 2 Bits 0-4 */
- unsigned char Channel:3; /* Byte 2 Bits 5-7 */
- unsigned char LogicalUnit:6; /* Byte 3 Bits 0-5 */
- unsigned char :2; /* Byte 3 Bits 6-7 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char ErrorCode:7; /* Byte 6 Bits 0-6 */
- bool Valid:1; /* Byte 6 Bit 7 */
- unsigned char SegmentNumber; /* Byte 7 */
- DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 8 Bits 0-3 */
- unsigned char :1; /* Byte 8 Bit 4 */
- bool ILI:1; /* Byte 8 Bit 5 */
- bool EOM:1; /* Byte 8 Bit 6 */
- bool Filemark:1; /* Byte 8 Bit 7 */
- unsigned char Information[4]; /* Bytes 9-12 */
- unsigned char AdditionalSenseLength; /* Byte 13 */
- unsigned char CommandSpecificInformation[4]; /* Bytes 14-17 */
- unsigned char AdditionalSenseCode; /* Byte 18 */
- unsigned char AdditionalSenseCodeQualifier; /* Byte 19 */
- unsigned char Dummy[12]; /* Bytes 20-31 */
-}
-DAC960_V1_EventLogEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V1_Device_Dead = 0x00,
- DAC960_V1_Device_WriteOnly = 0x02,
- DAC960_V1_Device_Online = 0x03,
- DAC960_V1_Device_Standby = 0x10
-}
-__attribute__ ((packed))
-DAC960_V1_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Device State Command reply structure.
- The structure is padded by 2 bytes for compatibility with Version 2.xx
- Firmware.
-*/
-
-typedef struct DAC960_V1_DeviceState
-{
- bool Present:1; /* Byte 0 Bit 0 */
- unsigned char :7; /* Byte 0 Bits 1-7 */
- enum {
- DAC960_V1_OtherType = 0x0,
- DAC960_V1_DiskType = 0x1,
- DAC960_V1_SequentialType = 0x2,
- DAC960_V1_CDROM_or_WORM_Type = 0x3
- } __attribute__ ((packed)) DeviceType:2; /* Byte 1 Bits 0-1 */
- bool :1; /* Byte 1 Bit 2 */
- bool Fast20:1; /* Byte 1 Bit 3 */
- bool Sync:1; /* Byte 1 Bit 4 */
- bool Fast:1; /* Byte 1 Bit 5 */
- bool Wide:1; /* Byte 1 Bit 6 */
- bool TaggedQueuingSupported:1; /* Byte 1 Bit 7 */
- DAC960_V1_PhysicalDeviceState_T DeviceState; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned char SynchronousMultiplier; /* Byte 4 */
- unsigned char SynchronousOffset:5; /* Byte 5 Bits 0-4 */
- unsigned char :3; /* Byte 5 Bits 5-7 */
- unsigned int DiskSize __attribute__ ((packed)); /* Bytes 6-9 */
- unsigned short :16; /* Bytes 10-11 */
-}
-DAC960_V1_DeviceState_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Rebuild Progress Command reply structure.
-*/
-
-typedef struct DAC960_V1_RebuildProgress
-{
- unsigned int LogicalDriveNumber; /* Bytes 0-3 */
- unsigned int LogicalDriveSize; /* Bytes 4-7 */
- unsigned int RemainingBlocks; /* Bytes 8-11 */
-}
-DAC960_V1_RebuildProgress_T;
-
-
-/*
- Define the DAC960 V1 Firmware Background Initialization Status Command
- reply structure.
-*/
-
-typedef struct DAC960_V1_BackgroundInitializationStatus
-{
- unsigned int LogicalDriveSize; /* Bytes 0-3 */
- unsigned int BlocksCompleted; /* Bytes 4-7 */
- unsigned char Reserved1[12]; /* Bytes 8-19 */
- unsigned int LogicalDriveNumber; /* Bytes 20-23 */
- unsigned char RAIDLevel; /* Byte 24 */
- enum {
- DAC960_V1_BackgroundInitializationInvalid = 0x00,
- DAC960_V1_BackgroundInitializationStarted = 0x02,
- DAC960_V1_BackgroundInitializationInProgress = 0x04,
- DAC960_V1_BackgroundInitializationSuspended = 0x05,
- DAC960_V1_BackgroundInitializationCancelled = 0x06
- } __attribute__ ((packed)) Status; /* Byte 25 */
- unsigned char Reserved2[6]; /* Bytes 26-31 */
-}
-DAC960_V1_BackgroundInitializationStatus_T;
-
-
-/*
- Define the DAC960 V1 Firmware Error Table Entry structure.
-*/
-
-typedef struct DAC960_V1_ErrorTableEntry
-{
- unsigned char ParityErrorCount; /* Byte 0 */
- unsigned char SoftErrorCount; /* Byte 1 */
- unsigned char HardErrorCount; /* Byte 2 */
- unsigned char MiscErrorCount; /* Byte 3 */
-}
-DAC960_V1_ErrorTableEntry_T;
-
-
-/*
- Define the DAC960 V1 Firmware Get Error Table Command reply structure.
-*/
-
-typedef struct DAC960_V1_ErrorTable
-{
- DAC960_V1_ErrorTableEntry_T
- ErrorTableEntries[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
-}
-DAC960_V1_ErrorTable_T;
-
-
-/*
- Define the DAC960 V1 Firmware Read Config2 Command reply structure.
-*/
-
-typedef struct DAC960_V1_Config2
-{
- unsigned char :1; /* Byte 0 Bit 0 */
- bool ActiveNegationEnabled:1; /* Byte 0 Bit 1 */
- unsigned char :5; /* Byte 0 Bits 2-6 */
- bool NoRescanIfResetReceivedDuringScan:1; /* Byte 0 Bit 7 */
- bool StorageWorksSupportEnabled:1; /* Byte 1 Bit 0 */
- bool HewlettPackardSupportEnabled:1; /* Byte 1 Bit 1 */
- bool NoDisconnectOnFirstCommand:1; /* Byte 1 Bit 2 */
- unsigned char :2; /* Byte 1 Bits 3-4 */
- bool AEMI_ARM:1; /* Byte 1 Bit 5 */
- bool AEMI_OFM:1; /* Byte 1 Bit 6 */
- unsigned char :1; /* Byte 1 Bit 7 */
- enum {
- DAC960_V1_OEMID_Mylex = 0x00,
- DAC960_V1_OEMID_IBM = 0x08,
- DAC960_V1_OEMID_HP = 0x0A,
- DAC960_V1_OEMID_DEC = 0x0C,
- DAC960_V1_OEMID_Siemens = 0x10,
- DAC960_V1_OEMID_Intel = 0x12
- } __attribute__ ((packed)) OEMID; /* Byte 2 */
- unsigned char OEMModelNumber; /* Byte 3 */
- unsigned char PhysicalSector; /* Byte 4 */
- unsigned char LogicalSector; /* Byte 5 */
- unsigned char BlockFactor; /* Byte 6 */
- bool ReadAheadEnabled:1; /* Byte 7 Bit 0 */
- bool LowBIOSDelay:1; /* Byte 7 Bit 1 */
- unsigned char :2; /* Byte 7 Bits 2-3 */
- bool ReassignRestrictedToOneSector:1; /* Byte 7 Bit 4 */
- unsigned char :1; /* Byte 7 Bit 5 */
- bool ForceUnitAccessDuringWriteRecovery:1; /* Byte 7 Bit 6 */
- bool EnableLeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */
- unsigned char DefaultRebuildRate; /* Byte 8 */
- unsigned char :8; /* Byte 9 */
- unsigned char BlocksPerCacheLine; /* Byte 10 */
- unsigned char BlocksPerStripe; /* Byte 11 */
- struct {
- enum {
- DAC960_V1_Async = 0x0,
- DAC960_V1_Sync_8MHz = 0x1,
- DAC960_V1_Sync_5MHz = 0x2,
- DAC960_V1_Sync_10or20MHz = 0x3 /* Byte 11 Bits 0-1 */
- } __attribute__ ((packed)) Speed:2;
- bool Force8Bit:1; /* Byte 11 Bit 2 */
- bool DisableFast20:1; /* Byte 11 Bit 3 */
- unsigned char :3; /* Byte 11 Bits 4-6 */
- bool EnableTaggedQueuing:1; /* Byte 11 Bit 7 */
- } __attribute__ ((packed)) ChannelParameters[6]; /* Bytes 12-17 */
- unsigned char SCSIInitiatorID; /* Byte 18 */
- unsigned char :8; /* Byte 19 */
- enum {
- DAC960_V1_StartupMode_ControllerSpinUp = 0x00,
- DAC960_V1_StartupMode_PowerOnSpinUp = 0x01
- } __attribute__ ((packed)) StartupMode; /* Byte 20 */
- unsigned char SimultaneousDeviceSpinUpCount; /* Byte 21 */
- unsigned char SecondsDelayBetweenSpinUps; /* Byte 22 */
- unsigned char Reserved1[29]; /* Bytes 23-51 */
- bool BIOSDisabled:1; /* Byte 52 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 52 Bit 1 */
- unsigned char :3; /* Byte 52 Bits 2-4 */
- enum {
- DAC960_V1_Geometry_128_32 = 0x0,
- DAC960_V1_Geometry_255_63 = 0x1,
- DAC960_V1_Geometry_Reserved1 = 0x2,
- DAC960_V1_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 52 Bits 5-6 */
- unsigned char :1; /* Byte 52 Bit 7 */
- unsigned char Reserved2[9]; /* Bytes 53-61 */
- unsigned short Checksum; /* Bytes 62-63 */
-}
-DAC960_V1_Config2_T;
-
-
-/*
- Define the DAC960 V1 Firmware DCDB request structure.
-*/
-
-typedef struct DAC960_V1_DCDB
-{
- unsigned char TargetID:4; /* Byte 0 Bits 0-3 */
- unsigned char Channel:4; /* Byte 0 Bits 4-7 */
- enum {
- DAC960_V1_DCDB_NoDataTransfer = 0,
- DAC960_V1_DCDB_DataTransferDeviceToSystem = 1,
- DAC960_V1_DCDB_DataTransferSystemToDevice = 2,
- DAC960_V1_DCDB_IllegalDataTransfer = 3
- } __attribute__ ((packed)) Direction:2; /* Byte 1 Bits 0-1 */
- bool EarlyStatus:1; /* Byte 1 Bit 2 */
- unsigned char :1; /* Byte 1 Bit 3 */
- enum {
- DAC960_V1_DCDB_Timeout_24_hours = 0,
- DAC960_V1_DCDB_Timeout_10_seconds = 1,
- DAC960_V1_DCDB_Timeout_60_seconds = 2,
- DAC960_V1_DCDB_Timeout_10_minutes = 3
- } __attribute__ ((packed)) Timeout:2; /* Byte 1 Bits 4-5 */
- bool NoAutomaticRequestSense:1; /* Byte 1 Bit 6 */
- bool DisconnectPermitted:1; /* Byte 1 Bit 7 */
- unsigned short TransferLength; /* Bytes 2-3 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 4-7 */
- unsigned char CDBLength:4; /* Byte 8 Bits 0-3 */
- unsigned char TransferLengthHigh4:4; /* Byte 8 Bits 4-7 */
- unsigned char SenseLength; /* Byte 9 */
- unsigned char CDB[12]; /* Bytes 10-21 */
- unsigned char SenseData[64]; /* Bytes 22-85 */
- unsigned char Status; /* Byte 86 */
- unsigned char :8; /* Byte 87 */
-}
-DAC960_V1_DCDB_T;
-
-
-/*
- Define the DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address
- 32 Bit Byte Count structure.
-*/
-
-typedef struct DAC960_V1_ScatterGatherSegment
-{
- DAC960_BusAddress32_T SegmentDataPointer; /* Bytes 0-3 */
- DAC960_ByteCount32_T SegmentByteCount; /* Bytes 4-7 */
-}
-DAC960_V1_ScatterGatherSegment_T;
-
-
-/*
- Define the 13 Byte DAC960 V1 Firmware Command Mailbox structure. Bytes 13-15
- are not used. The Command Mailbox structure is padded to 16 bytes for
- efficient access.
-*/
-
-typedef union DAC960_V1_CommandMailbox
-{
- unsigned int Words[4]; /* Words 0-3 */
- unsigned char Bytes[16]; /* Bytes 0-15 */
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy[14]; /* Bytes 2-15 */
- } __attribute__ ((packed)) Common;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[6]; /* Bytes 2-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char Dummy1[5]; /* Bytes 3-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3B;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[5]; /* Bytes 2-6 */
- unsigned char LogicalDriveNumber:6; /* Byte 7 Bits 0-6 */
- bool AutoRestore:1; /* Byte 7 Bit 7 */
- unsigned char Dummy2[8]; /* Bytes 8-15 */
- } __attribute__ ((packed)) Type3C;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Channel; /* Byte 2 */
- unsigned char TargetID; /* Byte 3 */
- DAC960_V1_PhysicalDeviceState_T DeviceState:5; /* Byte 4 Bits 0-4 */
- unsigned char Modifier:3; /* Byte 4 Bits 5-7 */
- unsigned char Dummy1[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3D;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- DAC960_V1_PerformEventLogOpType_T OperationType; /* Byte 2 */
- unsigned char OperationQualifier; /* Byte 3 */
- unsigned short SequenceNumber; /* Bytes 4-5 */
- unsigned char Dummy1[2]; /* Bytes 6-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy2[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3E;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char Dummy1[2]; /* Bytes 2-3 */
- unsigned char RebuildRateConstant; /* Byte 4 */
- unsigned char Dummy2[3]; /* Bytes 5-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char Dummy3[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) Type3R;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned short TransferLength; /* Bytes 2-3 */
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char LogicalDriveNumber; /* Byte 12 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type4;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- struct {
- unsigned short TransferLength:11; /* Bytes 2-3 */
- unsigned char LogicalDriveNumber:5; /* Byte 3 Bits 3-7 */
- } __attribute__ ((packed)) LD;
- unsigned int LogicalBlockAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */
- unsigned char ScatterGatherCount:6; /* Byte 12 Bits 0-5 */
- enum {
- DAC960_V1_ScatterGather_32BitAddress_32BitByteCount = 0x0,
- DAC960_V1_ScatterGather_32BitAddress_16BitByteCount = 0x1,
- DAC960_V1_ScatterGather_32BitByteCount_32BitAddress = 0x2,
- DAC960_V1_ScatterGather_16BitByteCount_32BitAddress = 0x3
- } __attribute__ ((packed)) ScatterGatherType:2; /* Byte 12 Bits 6-7 */
- unsigned char Dummy[3]; /* Bytes 13-15 */
- } __attribute__ ((packed)) Type5;
- struct {
- DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */
- unsigned char CommandOpcode2; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- DAC960_BusAddress32_T CommandMailboxesBusAddress; /* Bytes 4-7 */
- DAC960_BusAddress32_T StatusMailboxesBusAddress; /* Bytes 8-11 */
- unsigned char Dummy[4]; /* Bytes 12-15 */
- } __attribute__ ((packed)) TypeX;
-}
-DAC960_V1_CommandMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_MemCopy = 0x01,
- DAC960_V2_SCSI_10_Passthru = 0x02,
- DAC960_V2_SCSI_255_Passthru = 0x03,
- DAC960_V2_SCSI_10 = 0x04,
- DAC960_V2_SCSI_256 = 0x05,
- DAC960_V2_IOCTL = 0x20
-}
-__attribute__ ((packed))
-DAC960_V2_CommandOpcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware IOCTL Opcodes.
-*/
-
-typedef enum
-{
- DAC960_V2_GetControllerInfo = 0x01,
- DAC960_V2_GetLogicalDeviceInfoValid = 0x03,
- DAC960_V2_GetPhysicalDeviceInfoValid = 0x05,
- DAC960_V2_GetHealthStatus = 0x11,
- DAC960_V2_GetEvent = 0x15,
- DAC960_V2_StartDiscovery = 0x81,
- DAC960_V2_SetDeviceState = 0x82,
- DAC960_V2_RebuildDeviceStart = 0x88,
- DAC960_V2_RebuildDeviceStop = 0x89,
- DAC960_V2_ConsistencyCheckStart = 0x8C,
- DAC960_V2_ConsistencyCheckStop = 0x8D,
- DAC960_V2_SetMemoryMailbox = 0x8E,
- DAC960_V2_PauseDevice = 0x92,
- DAC960_V2_TranslatePhysicalToLogicalDevice = 0xC5
-}
-__attribute__ ((packed))
-DAC960_V2_IOCTL_Opcode_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Identifier type.
-*/
-
-typedef unsigned short DAC960_V2_CommandIdentifier_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Status Codes.
-*/
-
-#define DAC960_V2_NormalCompletion 0x00
-#define DAC960_V2_AbormalCompletion 0x02
-#define DAC960_V2_DeviceBusy 0x08
-#define DAC960_V2_DeviceNonresponsive 0x0E
-#define DAC960_V2_DeviceNonresponsive2 0x0F
-#define DAC960_V2_DeviceRevervationConflict 0x18
-
-typedef unsigned char DAC960_V2_CommandStatus_T;
-
-
-/*
- Define the DAC960 V2 Firmware Memory Type structure.
-*/
-
-typedef struct DAC960_V2_MemoryType
-{
- enum {
- DAC960_V2_MemoryType_Reserved = 0x00,
- DAC960_V2_MemoryType_DRAM = 0x01,
- DAC960_V2_MemoryType_EDRAM = 0x02,
- DAC960_V2_MemoryType_EDO = 0x03,
- DAC960_V2_MemoryType_SDRAM = 0x04,
- DAC960_V2_MemoryType_Last = 0x1F
- } __attribute__ ((packed)) MemoryType:5; /* Byte 0 Bits 0-4 */
- bool :1; /* Byte 0 Bit 5 */
- bool MemoryParity:1; /* Byte 0 Bit 6 */
- bool MemoryECC:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_MemoryType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Processor Type structure.
-*/
-
-typedef enum
-{
- DAC960_V2_ProcessorType_i960CA = 0x01,
- DAC960_V2_ProcessorType_i960RD = 0x02,
- DAC960_V2_ProcessorType_i960RN = 0x03,
- DAC960_V2_ProcessorType_i960RP = 0x04,
- DAC960_V2_ProcessorType_NorthBay = 0x05,
- DAC960_V2_ProcessorType_StrongArm = 0x06,
- DAC960_V2_ProcessorType_i960RM = 0x07
-}
-__attribute__ ((packed))
-DAC960_V2_ProcessorType_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Controller Info reply structure.
-*/
-
-typedef struct DAC960_V2_ControllerInfo
-{
- unsigned char :8; /* Byte 0 */
- enum {
- DAC960_V2_SCSI_Bus = 0x00,
- DAC960_V2_Fibre_Bus = 0x01,
- DAC960_V2_PCI_Bus = 0x03
- } __attribute__ ((packed)) BusInterfaceType; /* Byte 1 */
- enum {
- DAC960_V2_DAC960E = 0x01,
- DAC960_V2_DAC960M = 0x08,
- DAC960_V2_DAC960PD = 0x10,
- DAC960_V2_DAC960PL = 0x11,
- DAC960_V2_DAC960PU = 0x12,
- DAC960_V2_DAC960PE = 0x13,
- DAC960_V2_DAC960PG = 0x14,
- DAC960_V2_DAC960PJ = 0x15,
- DAC960_V2_DAC960PTL0 = 0x16,
- DAC960_V2_DAC960PR = 0x17,
- DAC960_V2_DAC960PRL = 0x18,
- DAC960_V2_DAC960PT = 0x19,
- DAC960_V2_DAC1164P = 0x1A,
- DAC960_V2_DAC960PTL1 = 0x1B,
- DAC960_V2_EXR2000P = 0x1C,
- DAC960_V2_EXR3000P = 0x1D,
- DAC960_V2_AcceleRAID352 = 0x1E,
- DAC960_V2_AcceleRAID170 = 0x1F,
- DAC960_V2_AcceleRAID160 = 0x20,
- DAC960_V2_DAC960S = 0x60,
- DAC960_V2_DAC960SU = 0x61,
- DAC960_V2_DAC960SX = 0x62,
- DAC960_V2_DAC960SF = 0x63,
- DAC960_V2_DAC960SS = 0x64,
- DAC960_V2_DAC960FL = 0x65,
- DAC960_V2_DAC960LL = 0x66,
- DAC960_V2_DAC960FF = 0x67,
- DAC960_V2_DAC960HP = 0x68,
- DAC960_V2_RAIDBRICK = 0x69,
- DAC960_V2_METEOR_FL = 0x6A,
- DAC960_V2_METEOR_FF = 0x6B
- } __attribute__ ((packed)) ControllerType; /* Byte 2 */
- unsigned char :8; /* Byte 3 */
- unsigned short BusInterfaceSpeedMHz; /* Bytes 4-5 */
- unsigned char BusWidthBits; /* Byte 6 */
- unsigned char FlashCodeTypeOrProductID; /* Byte 7 */
- unsigned char NumberOfHostPortsPresent; /* Byte 8 */
- unsigned char Reserved1[7]; /* Bytes 9-15 */
- unsigned char BusInterfaceName[16]; /* Bytes 16-31 */
- unsigned char ControllerName[16]; /* Bytes 32-47 */
- unsigned char Reserved2[16]; /* Bytes 48-63 */
- /* Firmware Release Information */
- unsigned char FirmwareMajorVersion; /* Byte 64 */
- unsigned char FirmwareMinorVersion; /* Byte 65 */
- unsigned char FirmwareTurnNumber; /* Byte 66 */
- unsigned char FirmwareBuildNumber; /* Byte 67 */
- unsigned char FirmwareReleaseDay; /* Byte 68 */
- unsigned char FirmwareReleaseMonth; /* Byte 69 */
- unsigned char FirmwareReleaseYearHigh2Digits; /* Byte 70 */
- unsigned char FirmwareReleaseYearLow2Digits; /* Byte 71 */
- /* Hardware Release Information */
- unsigned char HardwareRevision; /* Byte 72 */
- unsigned int :24; /* Bytes 73-75 */
- unsigned char HardwareReleaseDay; /* Byte 76 */
- unsigned char HardwareReleaseMonth; /* Byte 77 */
- unsigned char HardwareReleaseYearHigh2Digits; /* Byte 78 */
- unsigned char HardwareReleaseYearLow2Digits; /* Byte 79 */
- /* Hardware Manufacturing Information */
- unsigned char ManufacturingBatchNumber; /* Byte 80 */
- unsigned char :8; /* Byte 81 */
- unsigned char ManufacturingPlantNumber; /* Byte 82 */
- unsigned char :8; /* Byte 83 */
- unsigned char HardwareManufacturingDay; /* Byte 84 */
- unsigned char HardwareManufacturingMonth; /* Byte 85 */
- unsigned char HardwareManufacturingYearHigh2Digits; /* Byte 86 */
- unsigned char HardwareManufacturingYearLow2Digits; /* Byte 87 */
- unsigned char MaximumNumberOfPDDperXLD; /* Byte 88 */
- unsigned char MaximumNumberOfILDperXLD; /* Byte 89 */
- unsigned short NonvolatileMemorySizeKB; /* Bytes 90-91 */
- unsigned char MaximumNumberOfXLD; /* Byte 92 */
- unsigned int :24; /* Bytes 93-95 */
- /* Unique Information per Controller */
- unsigned char ControllerSerialNumber[16]; /* Bytes 96-111 */
- unsigned char Reserved3[16]; /* Bytes 112-127 */
- /* Vendor Information */
- unsigned int :24; /* Bytes 128-130 */
- unsigned char OEM_Code; /* Byte 131 */
- unsigned char VendorName[16]; /* Bytes 132-147 */
- /* Other Physical/Controller/Operation Information */
- bool BBU_Present:1; /* Byte 148 Bit 0 */
- bool ActiveActiveClusteringMode:1; /* Byte 148 Bit 1 */
- unsigned char :6; /* Byte 148 Bits 2-7 */
- unsigned char :8; /* Byte 149 */
- unsigned short :16; /* Bytes 150-151 */
- /* Physical Device Scan Information */
- bool PhysicalScanActive:1; /* Byte 152 Bit 0 */
- unsigned char :7; /* Byte 152 Bits 1-7 */
- unsigned char PhysicalDeviceChannelNumber; /* Byte 153 */
- unsigned char PhysicalDeviceTargetID; /* Byte 154 */
- unsigned char PhysicalDeviceLogicalUnit; /* Byte 155 */
- /* Maximum Command Data Transfer Sizes */
- unsigned short MaximumDataTransferSizeInBlocks; /* Bytes 156-157 */
- unsigned short MaximumScatterGatherEntries; /* Bytes 158-159 */
- /* Logical/Physical Device Counts */
- unsigned short LogicalDevicesPresent; /* Bytes 160-161 */
- unsigned short LogicalDevicesCritical; /* Bytes 162-163 */
- unsigned short LogicalDevicesOffline; /* Bytes 164-165 */
- unsigned short PhysicalDevicesPresent; /* Bytes 166-167 */
- unsigned short PhysicalDisksPresent; /* Bytes 168-169 */
- unsigned short PhysicalDisksCritical; /* Bytes 170-171 */
- unsigned short PhysicalDisksOffline; /* Bytes 172-173 */
- unsigned short MaximumParallelCommands; /* Bytes 174-175 */
- /* Channel and Target ID Information */
- unsigned char NumberOfPhysicalChannelsPresent; /* Byte 176 */
- unsigned char NumberOfVirtualChannelsPresent; /* Byte 177 */
- unsigned char NumberOfPhysicalChannelsPossible; /* Byte 178 */
- unsigned char NumberOfVirtualChannelsPossible; /* Byte 179 */
- unsigned char MaximumTargetsPerChannel[16]; /* Bytes 180-195 */
- unsigned char Reserved4[12]; /* Bytes 196-207 */
- /* Memory/Cache Information */
- unsigned short MemorySizeMB; /* Bytes 208-209 */
- unsigned short CacheSizeMB; /* Bytes 210-211 */
- unsigned int ValidCacheSizeInBytes; /* Bytes 212-215 */
- unsigned int DirtyCacheSizeInBytes; /* Bytes 216-219 */
- unsigned short MemorySpeedMHz; /* Bytes 220-221 */
- unsigned char MemoryDataWidthBits; /* Byte 222 */
- DAC960_V2_MemoryType_T MemoryType; /* Byte 223 */
- unsigned char CacheMemoryTypeName[16]; /* Bytes 224-239 */
- /* Execution Memory Information */
- unsigned short ExecutionMemorySizeMB; /* Bytes 240-241 */
- unsigned short ExecutionL2CacheSizeMB; /* Bytes 242-243 */
- unsigned char Reserved5[8]; /* Bytes 244-251 */
- unsigned short ExecutionMemorySpeedMHz; /* Bytes 252-253 */
- unsigned char ExecutionMemoryDataWidthBits; /* Byte 254 */
- DAC960_V2_MemoryType_T ExecutionMemoryType; /* Byte 255 */
- unsigned char ExecutionMemoryTypeName[16]; /* Bytes 256-271 */
- /* First CPU Type Information */
- unsigned short FirstProcessorSpeedMHz; /* Bytes 272-273 */
- DAC960_V2_ProcessorType_T FirstProcessorType; /* Byte 274 */
- unsigned char FirstProcessorCount; /* Byte 275 */
- unsigned char Reserved6[12]; /* Bytes 276-287 */
- unsigned char FirstProcessorName[16]; /* Bytes 288-303 */
- /* Second CPU Type Information */
- unsigned short SecondProcessorSpeedMHz; /* Bytes 304-305 */
- DAC960_V2_ProcessorType_T SecondProcessorType; /* Byte 306 */
- unsigned char SecondProcessorCount; /* Byte 307 */
- unsigned char Reserved7[12]; /* Bytes 308-319 */
- unsigned char SecondProcessorName[16]; /* Bytes 320-335 */
- /* Debugging/Profiling/Command Time Tracing Information */
- unsigned short CurrentProfilingDataPageNumber; /* Bytes 336-337 */
- unsigned short ProgramsAwaitingProfilingData; /* Bytes 338-339 */
- unsigned short CurrentCommandTimeTraceDataPageNumber; /* Bytes 340-341 */
- unsigned short ProgramsAwaitingCommandTimeTraceData; /* Bytes 342-343 */
- unsigned char Reserved8[8]; /* Bytes 344-351 */
- /* Error Counters on Physical Devices */
- unsigned short PhysicalDeviceBusResets; /* Bytes 352-353 */
- unsigned short PhysicalDeviceParityErrors; /* Bytes 355-355 */
- unsigned short PhysicalDeviceSoftErrors; /* Bytes 356-357 */
- unsigned short PhysicalDeviceCommandsFailed; /* Bytes 358-359 */
- unsigned short PhysicalDeviceMiscellaneousErrors; /* Bytes 360-361 */
- unsigned short PhysicalDeviceCommandTimeouts; /* Bytes 362-363 */
- unsigned short PhysicalDeviceSelectionTimeouts; /* Bytes 364-365 */
- unsigned short PhysicalDeviceRetriesDone; /* Bytes 366-367 */
- unsigned short PhysicalDeviceAbortsDone; /* Bytes 368-369 */
- unsigned short PhysicalDeviceHostCommandAbortsDone; /* Bytes 370-371 */
- unsigned short PhysicalDevicePredictedFailuresDetected; /* Bytes 372-373 */
- unsigned short PhysicalDeviceHostCommandsFailed; /* Bytes 374-375 */
- unsigned short PhysicalDeviceHardErrors; /* Bytes 376-377 */
- unsigned char Reserved9[6]; /* Bytes 378-383 */
- /* Error Counters on Logical Devices */
- unsigned short LogicalDeviceSoftErrors; /* Bytes 384-385 */
- unsigned short LogicalDeviceCommandsFailed; /* Bytes 386-387 */
- unsigned short LogicalDeviceHostCommandAbortsDone; /* Bytes 388-389 */
- unsigned short :16; /* Bytes 390-391 */
- /* Error Counters on Controller */
- unsigned short ControllerMemoryErrors; /* Bytes 392-393 */
- unsigned short ControllerHostCommandAbortsDone; /* Bytes 394-395 */
- unsigned int :32; /* Bytes 396-399 */
- /* Long Duration Activity Information */
- unsigned short BackgroundInitializationsActive; /* Bytes 400-401 */
- unsigned short LogicalDeviceInitializationsActive; /* Bytes 402-403 */
- unsigned short PhysicalDeviceInitializationsActive; /* Bytes 404-405 */
- unsigned short ConsistencyChecksActive; /* Bytes 406-407 */
- unsigned short RebuildsActive; /* Bytes 408-409 */
- unsigned short OnlineExpansionsActive; /* Bytes 410-411 */
- unsigned short PatrolActivitiesActive; /* Bytes 412-413 */
- unsigned short :16; /* Bytes 414-415 */
- /* Flash ROM Information */
- unsigned char FlashType; /* Byte 416 */
- unsigned char :8; /* Byte 417 */
- unsigned short FlashSizeMB; /* Bytes 418-419 */
- unsigned int FlashLimit; /* Bytes 420-423 */
- unsigned int FlashCount; /* Bytes 424-427 */
- unsigned int :32; /* Bytes 428-431 */
- unsigned char FlashTypeName[16]; /* Bytes 432-447 */
- /* Firmware Run Time Information */
- unsigned char RebuildRate; /* Byte 448 */
- unsigned char BackgroundInitializationRate; /* Byte 449 */
- unsigned char ForegroundInitializationRate; /* Byte 450 */
- unsigned char ConsistencyCheckRate; /* Byte 451 */
- unsigned int :32; /* Bytes 452-455 */
- unsigned int MaximumDP; /* Bytes 456-459 */
- unsigned int FreeDP; /* Bytes 460-463 */
- unsigned int MaximumIOP; /* Bytes 464-467 */
- unsigned int FreeIOP; /* Bytes 468-471 */
- unsigned short MaximumCombLengthInBlocks; /* Bytes 472-473 */
- unsigned short NumberOfConfigurationGroups; /* Bytes 474-475 */
- bool InstallationAbortStatus:1; /* Byte 476 Bit 0 */
- bool MaintenanceModeStatus:1; /* Byte 476 Bit 1 */
- unsigned int :24; /* Bytes 476-479 */
- unsigned char Reserved10[32]; /* Bytes 480-511 */
- unsigned char Reserved11[512]; /* Bytes 512-1023 */
-}
-DAC960_V2_ControllerInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_LogicalDevice_Online = 0x01,
- DAC960_V2_LogicalDevice_Offline = 0x08,
- DAC960_V2_LogicalDevice_Critical = 0x09
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Logical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_LogicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState; /* Byte 4 */
- unsigned char RAIDLevel; /* Byte 5 */
- unsigned char StripeSize; /* Byte 6 */
- unsigned char CacheLineSize; /* Byte 7 */
- struct {
- enum {
- DAC960_V2_ReadCacheDisabled = 0x0,
- DAC960_V2_ReadCacheEnabled = 0x1,
- DAC960_V2_ReadAheadEnabled = 0x2,
- DAC960_V2_IntelligentReadAheadEnabled = 0x3,
- DAC960_V2_ReadCache_Last = 0x7
- } __attribute__ ((packed)) ReadCache:3; /* Byte 8 Bits 0-2 */
- enum {
- DAC960_V2_WriteCacheDisabled = 0x0,
- DAC960_V2_LogicalDeviceReadOnly = 0x1,
- DAC960_V2_WriteCacheEnabled = 0x2,
- DAC960_V2_IntelligentWriteCacheEnabled = 0x3,
- DAC960_V2_WriteCache_Last = 0x7
- } __attribute__ ((packed)) WriteCache:3; /* Byte 8 Bits 3-5 */
- bool :1; /* Byte 8 Bit 6 */
- bool LogicalDeviceInitialized:1; /* Byte 8 Bit 7 */
- } LogicalDeviceControl; /* Byte 8 */
- /* Logical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 9 Bit 0 */
- bool RebuildInProgress:1; /* Byte 9 Bit 1 */
- bool BackgroundInitializationInProgress:1; /* Byte 9 Bit 2 */
- bool ForegroundInitializationInProgress:1; /* Byte 9 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 9 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 9 Bit 5 */
- unsigned char :2; /* Byte 9 Bits 6-7 */
- unsigned char RAID5WriteUpdate; /* Byte 10 */
- unsigned char RAID5Algorithm; /* Byte 11 */
- unsigned short LogicalDeviceNumber; /* Bytes 12-13 */
- /* BIOS Info */
- bool BIOSDisabled:1; /* Byte 14 Bit 0 */
- bool CDROMBootEnabled:1; /* Byte 14 Bit 1 */
- bool DriveCoercionEnabled:1; /* Byte 14 Bit 2 */
- bool WriteSameDisabled:1; /* Byte 14 Bit 3 */
- bool HBA_ModeEnabled:1; /* Byte 14 Bit 4 */
- enum {
- DAC960_V2_Geometry_128_32 = 0x0,
- DAC960_V2_Geometry_255_63 = 0x1,
- DAC960_V2_Geometry_Reserved1 = 0x2,
- DAC960_V2_Geometry_Reserved2 = 0x3
- } __attribute__ ((packed)) DriveGeometry:2; /* Byte 14 Bits 5-6 */
- bool SuperReadAheadEnabled:1; /* Byte 14 Bit 7 */
- unsigned char :8; /* Byte 15 */
- /* Error Counters */
- unsigned short SoftErrors; /* Bytes 16-17 */
- unsigned short CommandsFailed; /* Bytes 18-19 */
- unsigned short HostCommandAbortsDone; /* Bytes 20-21 */
- unsigned short DeferredWriteErrors; /* Bytes 22-23 */
- unsigned int :32; /* Bytes 24-27 */
- unsigned int :32; /* Bytes 28-31 */
- /* Device Size Information */
- unsigned short :16; /* Bytes 32-33 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 34-35 */
- unsigned int OriginalDeviceSize; /* Bytes 36-39 */
- unsigned int ConfigurableDeviceSize; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char LogicalDeviceName[32]; /* Bytes 48-79 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 80-115 */
- unsigned char Reserved1[12]; /* Bytes 116-127 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 128-135 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 136-143 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 144-151 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 152-159 */
- DAC960_ByteCount64_T BackgroundInitializationBlockNumber; /* Bytes 160-167 */
- DAC960_ByteCount64_T ForegroundInitializationBlockNumber; /* Bytes 168-175 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 176-183 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 184-191 */
- unsigned char Reserved2[64]; /* Bytes 192-255 */
-}
-DAC960_V2_LogicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device State type.
-*/
-
-typedef enum
-{
- DAC960_V2_Device_Unconfigured = 0x00,
- DAC960_V2_Device_Online = 0x01,
- DAC960_V2_Device_Rebuild = 0x03,
- DAC960_V2_Device_Missing = 0x04,
- DAC960_V2_Device_Critical = 0x05,
- DAC960_V2_Device_Dead = 0x08,
- DAC960_V2_Device_SuspectedDead = 0x0C,
- DAC960_V2_Device_CommandedOffline = 0x10,
- DAC960_V2_Device_Standby = 0x21,
- DAC960_V2_Device_InvalidState = 0xFF
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDeviceState_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Physical Device Info reply structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDeviceInfo
-{
- unsigned char :8; /* Byte 0 */
- unsigned char Channel; /* Byte 1 */
- unsigned char TargetID; /* Byte 2 */
- unsigned char LogicalUnit; /* Byte 3 */
- /* Configuration Status Bits */
- bool PhysicalDeviceFaultTolerant:1; /* Byte 4 Bit 0 */
- bool PhysicalDeviceConnected:1; /* Byte 4 Bit 1 */
- bool PhysicalDeviceLocalToController:1; /* Byte 4 Bit 2 */
- unsigned char :5; /* Byte 4 Bits 3-7 */
- /* Multiple Host/Controller Status Bits */
- bool RemoteHostSystemDead:1; /* Byte 5 Bit 0 */
- bool RemoteControllerDead:1; /* Byte 5 Bit 1 */
- unsigned char :6; /* Byte 5 Bits 2-7 */
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; /* Byte 6 */
- unsigned char NegotiatedDataWidthBits; /* Byte 7 */
- unsigned short NegotiatedSynchronousMegaTransfers; /* Bytes 8-9 */
- /* Multiported Physical Device Information */
- unsigned char NumberOfPortConnections; /* Byte 10 */
- unsigned char DriveAccessibilityBitmap; /* Byte 11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned char NetworkAddress[16]; /* Bytes 16-31 */
- unsigned short MaximumTags; /* Bytes 32-33 */
- /* Physical Device Operations Status */
- bool ConsistencyCheckInProgress:1; /* Byte 34 Bit 0 */
- bool RebuildInProgress:1; /* Byte 34 Bit 1 */
- bool MakingDataConsistentInProgress:1; /* Byte 34 Bit 2 */
- bool PhysicalDeviceInitializationInProgress:1; /* Byte 34 Bit 3 */
- bool DataMigrationInProgress:1; /* Byte 34 Bit 4 */
- bool PatrolOperationInProgress:1; /* Byte 34 Bit 5 */
- unsigned char :2; /* Byte 34 Bits 6-7 */
- unsigned char LongOperationStatus; /* Byte 35 */
- unsigned char ParityErrors; /* Byte 36 */
- unsigned char SoftErrors; /* Byte 37 */
- unsigned char HardErrors; /* Byte 38 */
- unsigned char MiscellaneousErrors; /* Byte 39 */
- unsigned char CommandTimeouts; /* Byte 40 */
- unsigned char Retries; /* Byte 41 */
- unsigned char Aborts; /* Byte 42 */
- unsigned char PredictedFailuresDetected; /* Byte 43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned short :16; /* Bytes 48-49 */
- unsigned short DeviceBlockSizeInBytes; /* Bytes 50-51 */
- unsigned int OriginalDeviceSize; /* Bytes 52-55 */
- unsigned int ConfigurableDeviceSize; /* Bytes 56-59 */
- unsigned int :32; /* Bytes 60-63 */
- unsigned char PhysicalDeviceName[16]; /* Bytes 64-79 */
- unsigned char Reserved1[16]; /* Bytes 80-95 */
- unsigned char Reserved2[32]; /* Bytes 96-127 */
- unsigned char SCSI_InquiryData[36]; /* Bytes 128-163 */
- unsigned char Reserved3[20]; /* Bytes 164-183 */
- unsigned char Reserved4[8]; /* Bytes 184-191 */
- DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 192-199 */
- DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 200-207 */
- DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 208-215 */
- DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 216-223 */
- DAC960_ByteCount64_T MakingDataConsistentBlockNumber; /* Bytes 224-231 */
- DAC960_ByteCount64_T DeviceInitializationBlockNumber; /* Bytes 232-239 */
- DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 240-247 */
- DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 248-255 */
- unsigned char Reserved5[256]; /* Bytes 256-511 */
-}
-DAC960_V2_PhysicalDeviceInfo_T;
-
-
-/*
- Define the DAC960 V2 Firmware Health Status Buffer structure.
-*/
-
-typedef struct DAC960_V2_HealthStatusBuffer
-{
- unsigned int MicrosecondsFromControllerStartTime; /* Bytes 0-3 */
- unsigned int MillisecondsFromControllerStartTime; /* Bytes 4-7 */
- unsigned int SecondsFrom1January1970; /* Bytes 8-11 */
- unsigned int :32; /* Bytes 12-15 */
- unsigned int StatusChangeCounter; /* Bytes 16-19 */
- unsigned int :32; /* Bytes 20-23 */
- unsigned int DebugOutputMessageBufferIndex; /* Bytes 24-27 */
- unsigned int CodedMessageBufferIndex; /* Bytes 28-31 */
- unsigned int CurrentTimeTracePageNumber; /* Bytes 32-35 */
- unsigned int CurrentProfilerPageNumber; /* Bytes 36-39 */
- unsigned int NextEventSequenceNumber; /* Bytes 40-43 */
- unsigned int :32; /* Bytes 44-47 */
- unsigned char Reserved1[16]; /* Bytes 48-63 */
- unsigned char Reserved2[64]; /* Bytes 64-127 */
-}
-DAC960_V2_HealthStatusBuffer_T;
-
-
-/*
- Define the DAC960 V2 Firmware Get Event reply structure.
-*/
-
-typedef struct DAC960_V2_Event
-{
- unsigned int EventSequenceNumber; /* Bytes 0-3 */
- unsigned int EventTime; /* Bytes 4-7 */
- unsigned int EventCode; /* Bytes 8-11 */
- unsigned char :8; /* Byte 12 */
- unsigned char Channel; /* Byte 13 */
- unsigned char TargetID; /* Byte 14 */
- unsigned char LogicalUnit; /* Byte 15 */
- unsigned int :32; /* Bytes 16-19 */
- unsigned int EventSpecificParameter; /* Bytes 20-23 */
- unsigned char RequestSenseData[40]; /* Bytes 24-63 */
-}
-DAC960_V2_Event_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Control Bits structure.
-*/
-
-typedef struct DAC960_V2_CommandControlBits
-{
- bool ForceUnitAccess:1; /* Byte 0 Bit 0 */
- bool DisablePageOut:1; /* Byte 0 Bit 1 */
- bool :1; /* Byte 0 Bit 2 */
- bool AdditionalScatterGatherListMemory:1; /* Byte 0 Bit 3 */
- bool DataTransferControllerToHost:1; /* Byte 0 Bit 4 */
- bool :1; /* Byte 0 Bit 5 */
- bool NoAutoRequestSense:1; /* Byte 0 Bit 6 */
- bool DisconnectProhibited:1; /* Byte 0 Bit 7 */
-}
-DAC960_V2_CommandControlBits_T;
-
-
-/*
- Define the DAC960 V2 Firmware Command Timeout structure.
-*/
-
-typedef struct DAC960_V2_CommandTimeout
-{
- unsigned char TimeoutValue:6; /* Byte 0 Bits 0-5 */
- enum {
- DAC960_V2_TimeoutScale_Seconds = 0,
- DAC960_V2_TimeoutScale_Minutes = 1,
- DAC960_V2_TimeoutScale_Hours = 2,
- DAC960_V2_TimeoutScale_Reserved = 3
- } __attribute__ ((packed)) TimeoutScale:2; /* Byte 0 Bits 6-7 */
-}
-DAC960_V2_CommandTimeout_T;
-
-
-/*
- Define the DAC960 V2 Firmware Physical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalDevice
-{
- unsigned char LogicalUnit; /* Byte 0 */
- unsigned char TargetID; /* Byte 1 */
- unsigned char Channel:3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_PhysicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Logical Device structure.
-*/
-
-typedef struct DAC960_V2_LogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned char :3; /* Byte 2 Bits 0-2 */
- unsigned char Controller:5; /* Byte 2 Bits 3-7 */
-}
-__attribute__ ((packed))
-DAC960_V2_LogicalDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Operation Device type.
-*/
-
-typedef enum
-{
- DAC960_V2_Physical_Device = 0x00,
- DAC960_V2_RAID_Device = 0x01,
- DAC960_V2_Physical_Channel = 0x02,
- DAC960_V2_RAID_Channel = 0x03,
- DAC960_V2_Physical_Controller = 0x04,
- DAC960_V2_RAID_Controller = 0x05,
- DAC960_V2_Configuration_Group = 0x10,
- DAC960_V2_Enclosure = 0x11
-}
-__attribute__ ((packed))
-DAC960_V2_OperationDevice_T;
-
-
-/*
- Define the DAC960 V2 Firmware Translate Physical To Logical Device structure.
-*/
-
-typedef struct DAC960_V2_PhysicalToLogicalDevice
-{
- unsigned short LogicalDeviceNumber; /* Bytes 0-1 */
- unsigned short :16; /* Bytes 2-3 */
- unsigned char PreviousBootController; /* Byte 4 */
- unsigned char PreviousBootChannel; /* Byte 5 */
- unsigned char PreviousBootTargetID; /* Byte 6 */
- unsigned char PreviousBootLogicalUnit; /* Byte 7 */
-}
-DAC960_V2_PhysicalToLogicalDevice_T;
-
-
-
-/*
- Define the DAC960 V2 Firmware Scatter/Gather List Entry structure.
-*/
-
-typedef struct DAC960_V2_ScatterGatherSegment
-{
- DAC960_BusAddress64_T SegmentDataPointer; /* Bytes 0-7 */
- DAC960_ByteCount64_T SegmentByteCount; /* Bytes 8-15 */
-}
-DAC960_V2_ScatterGatherSegment_T;
-
-
-/*
- Define the DAC960 V2 Firmware Data Transfer Memory Address structure.
-*/
-
-typedef union DAC960_V2_DataTransferMemoryAddress
-{
- DAC960_V2_ScatterGatherSegment_T ScatterGatherSegments[2]; /* Bytes 0-31 */
- struct {
- unsigned short ScatterGatherList0Length; /* Bytes 0-1 */
- unsigned short ScatterGatherList1Length; /* Bytes 2-3 */
- unsigned short ScatterGatherList2Length; /* Bytes 4-5 */
- unsigned short :16; /* Bytes 6-7 */
- DAC960_BusAddress64_T ScatterGatherList0Address; /* Bytes 8-15 */
- DAC960_BusAddress64_T ScatterGatherList1Address; /* Bytes 16-23 */
- DAC960_BusAddress64_T ScatterGatherList2Address; /* Bytes 24-31 */
- } ExtendedScatterGather;
-}
-DAC960_V2_DataTransferMemoryAddress_T;
-
-
-/*
- Define the 64 Byte DAC960 V2 Firmware Command Mailbox structure.
-*/
-
-typedef union DAC960_V2_CommandMailbox
-{
- unsigned int Words[16]; /* Words 0-15 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } Common;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned char SCSI_CDB[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_10;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char CDBLength; /* Byte 21 */
- unsigned short :16; /* Bytes 22-23 */
- DAC960_BusAddress64_T SCSI_CDB_BusAddress; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SCSI_255;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short :16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ControllerInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } LogicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char Reserved[10]; /* Bytes 22-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } PhysicalDeviceInfo;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned short EventSequenceNumberHigh16; /* Bytes 16-17 */
- unsigned char ControllerNumber; /* Byte 18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned short EventSequenceNumberLow16; /* Bytes 22-23 */
- unsigned char Reserved[8]; /* Bytes 24-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } GetEvent;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- union {
- DAC960_V2_LogicalDeviceState_T LogicalDeviceState;
- DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState;
- } DeviceState; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } SetDeviceState;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- bool RestoreConsistency:1; /* Byte 22 Bit 0 */
- bool InitializedAreaOnly:1; /* Byte 22 Bit 1 */
- unsigned char :6; /* Byte 22 Bits 2-7 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } ConsistencyCheck;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- unsigned char FirstCommandMailboxSizeKB; /* Byte 4 */
- unsigned char FirstStatusMailboxSizeKB; /* Byte 5 */
- unsigned char SecondCommandMailboxSizeKB; /* Byte 6 */
- unsigned char SecondStatusMailboxSizeKB; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- unsigned int :24; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- unsigned char HealthStatusBufferSizeKB; /* Byte 22 */
- unsigned char :8; /* Byte 23 */
- DAC960_BusAddress64_T HealthStatusBufferBusAddress; /* Bytes 24-31 */
- DAC960_BusAddress64_T FirstCommandMailboxBusAddress; /* Bytes 32-39 */
- DAC960_BusAddress64_T FirstStatusMailboxBusAddress; /* Bytes 40-47 */
- DAC960_BusAddress64_T SecondCommandMailboxBusAddress; /* Bytes 48-55 */
- DAC960_BusAddress64_T SecondStatusMailboxBusAddress; /* Bytes 56-63 */
- } SetMemoryMailbox;
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */
- DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */
- DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */
- unsigned char DataTransferPageNumber; /* Byte 7 */
- DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */
- DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */
- DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */
- unsigned char RequestSenseSize; /* Byte 20 */
- unsigned char IOCTL_Opcode; /* Byte 21 */
- DAC960_V2_OperationDevice_T OperationDevice; /* Byte 22 */
- unsigned char Reserved[9]; /* Bytes 23-31 */
- DAC960_V2_DataTransferMemoryAddress_T
- DataTransferMemoryAddress; /* Bytes 32-63 */
- } DeviceOperation;
-}
-DAC960_V2_CommandMailbox_T;
-
-
-/*
- Define the DAC960 Driver IOCTL requests.
-*/
-
-#define DAC960_IOCTL_GET_CONTROLLER_COUNT 0xDAC001
-#define DAC960_IOCTL_GET_CONTROLLER_INFO 0xDAC002
-#define DAC960_IOCTL_V1_EXECUTE_COMMAND 0xDAC003
-#define DAC960_IOCTL_V2_EXECUTE_COMMAND 0xDAC004
-#define DAC960_IOCTL_V2_GET_HEALTH_STATUS 0xDAC005
-
-
-/*
- Define the DAC960_IOCTL_GET_CONTROLLER_INFO reply structure.
-*/
-
-typedef struct DAC960_ControllerInfo
-{
- unsigned char ControllerNumber;
- unsigned char FirmwareType;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char PCI_Bus;
- unsigned char PCI_Device;
- unsigned char PCI_Function;
- unsigned char IRQ_Channel;
- DAC960_PCI_Address_T PCI_Address;
- unsigned char ModelName[20];
- unsigned char FirmwareVersion[12];
-}
-DAC960_ControllerInfo_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void __user *DataTransferBuffer;
- DAC960_V1_DCDB_T __user *DCDB;
-}
-DAC960_V1_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V1_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V1_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- void *DataTransferBuffer;
- DAC960_V1_DCDB_T *DCDB;
- DAC960_V1_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V1_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V1_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_UserCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void __user *DataTransferBuffer;
- void __user *RequestSenseBuffer;
-}
-DAC960_V2_UserCommand_T;
-
-
-/*
- Define the Kernel Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure.
-*/
-
-typedef struct DAC960_V2_KernelCommand
-{
- unsigned char ControllerNumber;
- DAC960_V2_CommandMailbox_T CommandMailbox;
- int DataTransferLength;
- int RequestSenseLength;
- void *DataTransferBuffer;
- void *RequestSenseBuffer;
- DAC960_V2_CommandStatus_T CommandStatus;
- void (*CompletionFunction)(struct DAC960_V2_KernelCommand *);
- void *CompletionData;
-}
-DAC960_V2_KernelCommand_T;
-
-
-/*
- Define the User Mode DAC960_IOCTL_V2_GET_HEALTH_STATUS request structure.
-*/
-
-typedef struct DAC960_V2_GetHealthStatus
-{
- unsigned char ControllerNumber;
- DAC960_V2_HealthStatusBuffer_T __user *HealthStatusBuffer;
-}
-DAC960_V2_GetHealthStatus_T;
-
-
-/*
- Import the Kernel Mode IOCTL interface.
-*/
-
-extern int DAC960_KernelIOCTL(unsigned int Request, void *Argument);
-
-
-/*
- DAC960_DriverVersion protects the private portion of this file.
-*/
-
-#ifdef DAC960_DriverVersion
-
-
-/*
- Define the maximum Driver Queue Depth and Controller Queue Depth supported
- by DAC960 V1 and V2 Firmware Controllers.
-*/
-
-#define DAC960_MaxDriverQueueDepth 511
-#define DAC960_MaxControllerQueueDepth 512
-
-
-/*
- Define the maximum number of Scatter/Gather Segments supported for any
- DAC960 V1 and V2 Firmware controller.
-*/
-
-#define DAC960_V1_ScatterGatherLimit 33
-#define DAC960_V2_ScatterGatherLimit 128
-
-
-/*
- Define the number of Command Mailboxes and Status Mailboxes used by the
- DAC960 V1 and V2 Firmware Memory Mailbox Interface.
-*/
-
-#define DAC960_V1_CommandMailboxCount 256
-#define DAC960_V1_StatusMailboxCount 1024
-#define DAC960_V2_CommandMailboxCount 512
-#define DAC960_V2_StatusMailboxCount 512
-
-
-/*
- Define the DAC960 Controller Monitoring Timer Interval.
-*/
-
-#define DAC960_MonitoringTimerInterval (10 * HZ)
-
-
-/*
- Define the DAC960 Controller Secondary Monitoring Interval.
-*/
-
-#define DAC960_SecondaryMonitoringInterval (60 * HZ)
-
-
-/*
- Define the DAC960 Controller Health Status Monitoring Interval.
-*/
-
-#define DAC960_HealthStatusMonitoringInterval (1 * HZ)
-
-
-/*
- Define the DAC960 Controller Progress Reporting Interval.
-*/
-
-#define DAC960_ProgressReportingInterval (60 * HZ)
-
-
-/*
- Define the maximum number of Partitions allowed for each Logical Drive.
-*/
-
-#define DAC960_MaxPartitions 8
-#define DAC960_MaxPartitionsBits 3
-
-/*
- Define the DAC960 Controller fixed Block Size and Block Size Bits.
-*/
-
-#define DAC960_BlockSize 512
-#define DAC960_BlockSizeBits 9
-
-
-/*
- Define the number of Command structures that should be allocated as a
- group to optimize kernel memory allocation.
-*/
-
-#define DAC960_V1_CommandAllocationGroupSize 11
-#define DAC960_V2_CommandAllocationGroupSize 29
-
-
-/*
- Define the Controller Line Buffer, Progress Buffer, User Message, and
- Initial Status Buffer sizes.
-*/
-
-#define DAC960_LineBufferSize 100
-#define DAC960_ProgressBufferSize 200
-#define DAC960_UserMessageSize 200
-#define DAC960_InitialStatusBufferSize (8192-32)
-
-
-/*
- Define the DAC960 Controller Firmware Types.
-*/
-
-typedef enum
-{
- DAC960_V1_Controller = 1,
- DAC960_V2_Controller = 2
-}
-DAC960_FirmwareType_T;
-
-
-/*
- Define the DAC960 Controller Hardware Types.
-*/
-
-typedef enum
-{
- DAC960_BA_Controller = 1, /* eXtremeRAID 2000 */
- DAC960_LP_Controller = 2, /* AcceleRAID 352 */
- DAC960_LA_Controller = 3, /* DAC1164P */
- DAC960_PG_Controller = 4, /* DAC960PTL/PJ/PG */
- DAC960_PD_Controller = 5, /* DAC960PU/PD/PL/P */
- DAC960_P_Controller = 6, /* DAC960PU/PD/PL/P */
- DAC960_GEM_Controller = 7, /* AcceleRAID 4/5/600 */
-}
-DAC960_HardwareType_T;
-
-
-/*
- Define the Driver Message Levels.
-*/
-
-typedef enum DAC960_MessageLevel
-{
- DAC960_AnnounceLevel = 0,
- DAC960_InfoLevel = 1,
- DAC960_NoticeLevel = 2,
- DAC960_WarningLevel = 3,
- DAC960_ErrorLevel = 4,
- DAC960_ProgressLevel = 5,
- DAC960_CriticalLevel = 6,
- DAC960_UserCriticalLevel = 7
-}
-DAC960_MessageLevel_T;
-
-static char
- *DAC960_MessageLevelMap[] =
- { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING,
- KERN_ERR, KERN_CRIT, KERN_CRIT, KERN_CRIT };
-
-
-/*
- Define Driver Message macros.
-*/
-
-#define DAC960_Announce(Format, Arguments...) \
- DAC960_Message(DAC960_AnnounceLevel, Format, ##Arguments)
-
-#define DAC960_Info(Format, Arguments...) \
- DAC960_Message(DAC960_InfoLevel, Format, ##Arguments)
-
-#define DAC960_Notice(Format, Arguments...) \
- DAC960_Message(DAC960_NoticeLevel, Format, ##Arguments)
-
-#define DAC960_Warning(Format, Arguments...) \
- DAC960_Message(DAC960_WarningLevel, Format, ##Arguments)
-
-#define DAC960_Error(Format, Arguments...) \
- DAC960_Message(DAC960_ErrorLevel, Format, ##Arguments)
-
-#define DAC960_Progress(Format, Arguments...) \
- DAC960_Message(DAC960_ProgressLevel, Format, ##Arguments)
-
-#define DAC960_Critical(Format, Arguments...) \
- DAC960_Message(DAC960_CriticalLevel, Format, ##Arguments)
-
-#define DAC960_UserCritical(Format, Arguments...) \
- DAC960_Message(DAC960_UserCriticalLevel, Format, ##Arguments)
-
-
-struct DAC960_privdata {
- DAC960_HardwareType_T HardwareType;
- DAC960_FirmwareType_T FirmwareType;
- irq_handler_t InterruptHandler;
- unsigned int MemoryWindowSize;
-};
-
-
-/*
- Define the DAC960 V1 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V1_StatusMailbox
-{
- unsigned int Word; /* Word 0 */
- struct {
- DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 0 */
- unsigned char :7; /* Byte 1 Bits 0-6 */
- bool Valid:1; /* Byte 1 Bit 7 */
- DAC960_V1_CommandStatus_T CommandStatus; /* Bytes 2-3 */
- } Fields;
-}
-DAC960_V1_StatusMailbox_T;
-
-
-/*
- Define the DAC960 V2 Firmware Controller Status Mailbox structure.
-*/
-
-typedef union DAC960_V2_StatusMailbox
-{
- unsigned int Words[2]; /* Words 0-1 */
- struct {
- DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */
- DAC960_V2_CommandStatus_T CommandStatus; /* Byte 2 */
- unsigned char RequestSenseLength; /* Byte 3 */
- int DataTransferResidue; /* Bytes 4-7 */
- } Fields;
-}
-DAC960_V2_StatusMailbox_T;
-
-
-/*
- Define the DAC960 Driver Command Types.
-*/
-
-typedef enum
-{
- DAC960_ReadCommand = 1,
- DAC960_WriteCommand = 2,
- DAC960_ReadRetryCommand = 3,
- DAC960_WriteRetryCommand = 4,
- DAC960_MonitoringCommand = 5,
- DAC960_ImmediateCommand = 6,
- DAC960_QueuedCommand = 7
-}
-DAC960_CommandType_T;
-
-
-/*
- Define the DAC960 Driver Command structure.
-*/
-
-typedef struct DAC960_Command
-{
- int CommandIdentifier;
- DAC960_CommandType_T CommandType;
- struct DAC960_Controller *Controller;
- struct DAC960_Command *Next;
- struct completion *Completion;
- unsigned int LogicalDriveNumber;
- unsigned int BlockNumber;
- unsigned int BlockCount;
- unsigned int SegmentCount;
- int DmaDirection;
- struct scatterlist *cmd_sglist;
- struct request *Request;
- union {
- struct {
- DAC960_V1_CommandMailbox_T CommandMailbox;
- DAC960_V1_KernelCommand_T *KernelCommand;
- DAC960_V1_CommandStatus_T CommandStatus;
- DAC960_V1_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- struct scatterlist ScatterList[DAC960_V1_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V1;
- struct {
- DAC960_V2_CommandMailbox_T CommandMailbox;
- DAC960_V2_KernelCommand_T *KernelCommand;
- DAC960_V2_CommandStatus_T CommandStatus;
- unsigned char RequestSenseLength;
- int DataTransferResidue;
- DAC960_V2_ScatterGatherSegment_T *ScatterGatherList;
- dma_addr_t ScatterGatherListDMA;
- DAC960_SCSI_RequestSense_T *RequestSense;
- dma_addr_t RequestSenseDMA;
- struct scatterlist ScatterList[DAC960_V2_ScatterGatherLimit];
- unsigned int EndMarker[0];
- } V2;
- } FW;
-}
-DAC960_Command_T;
-
-
-/*
- Define the DAC960 Driver Controller structure.
-*/
-
-typedef struct DAC960_Controller
-{
- void __iomem *BaseAddress;
- void __iomem *MemoryMappedAddress;
- DAC960_FirmwareType_T FirmwareType;
- DAC960_HardwareType_T HardwareType;
- DAC960_IO_Address_T IO_Address;
- DAC960_PCI_Address_T PCI_Address;
- struct pci_dev *PCIDevice;
- unsigned char ControllerNumber;
- unsigned char ControllerName[4];
- unsigned char ModelName[20];
- unsigned char FullModelName[28];
- unsigned char FirmwareVersion[12];
- unsigned char Bus;
- unsigned char Device;
- unsigned char Function;
- unsigned char IRQ_Channel;
- unsigned char Channels;
- unsigned char Targets;
- unsigned char MemorySize;
- unsigned char LogicalDriveCount;
- unsigned short CommandAllocationGroupSize;
- unsigned short ControllerQueueDepth;
- unsigned short DriverQueueDepth;
- unsigned short MaxBlocksPerCommand;
- unsigned short ControllerScatterGatherLimit;
- unsigned short DriverScatterGatherLimit;
- unsigned int CombinedStatusBufferLength;
- unsigned int InitialStatusLength;
- unsigned int CurrentStatusLength;
- unsigned int ProgressBufferLength;
- unsigned int UserStatusLength;
- struct dma_loaf DmaPages;
- unsigned long MonitoringTimerCount;
- unsigned long PrimaryMonitoringTime;
- unsigned long SecondaryMonitoringTime;
- unsigned long ShutdownMonitoringTimer;
- unsigned long LastProgressReportTime;
- unsigned long LastCurrentStatusTime;
- bool ControllerInitialized;
- bool MonitoringCommandDeferred;
- bool EphemeralProgressMessage;
- bool DriveSpinUpMessageDisplayed;
- bool MonitoringAlertMode;
- bool SuppressEnclosureMessages;
- struct timer_list MonitoringTimer;
- struct gendisk *disks[DAC960_MaxLogicalDrives];
- struct dma_pool *ScatterGatherPool;
- DAC960_Command_T *FreeCommands;
- unsigned char *CombinedStatusBuffer;
- unsigned char *CurrentStatusBuffer;
- struct request_queue *RequestQueue[DAC960_MaxLogicalDrives];
- int req_q_index;
- spinlock_t queue_lock;
- wait_queue_head_t CommandWaitQueue;
- wait_queue_head_t HealthStatusWaitQueue;
- DAC960_Command_T InitialCommand;
- DAC960_Command_T *Commands[DAC960_MaxDriverQueueDepth];
- struct proc_dir_entry *ControllerProcEntry;
- bool LogicalDriveInitiallyAccessible[DAC960_MaxLogicalDrives];
- void (*QueueCommand)(DAC960_Command_T *Command);
- bool (*ReadControllerConfiguration)(struct DAC960_Controller *);
- bool (*ReadDeviceConfiguration)(struct DAC960_Controller *);
- bool (*ReportDeviceConfiguration)(struct DAC960_Controller *);
- void (*QueueReadWriteCommand)(DAC960_Command_T *Command);
- union {
- struct {
- unsigned char GeometryTranslationHeads;
- unsigned char GeometryTranslationSectors;
- unsigned char PendingRebuildFlag;
- unsigned short StripeSize;
- unsigned short SegmentSize;
- unsigned short NewEventLogSequenceNumber;
- unsigned short OldEventLogSequenceNumber;
- unsigned short DeviceStateChannel;
- unsigned short DeviceStateTargetID;
- bool DualModeMemoryMailboxInterface;
- bool BackgroundInitializationStatusSupported;
- bool SAFTE_EnclosureManagementEnabled;
- bool NeedLogicalDriveInformation;
- bool NeedErrorTableInformation;
- bool NeedDeviceStateInformation;
- bool NeedDeviceInquiryInformation;
- bool NeedDeviceSerialNumberInformation;
- bool NeedRebuildProgress;
- bool NeedConsistencyCheckProgress;
- bool NeedBackgroundInitializationStatus;
- bool StartDeviceStateScan;
- bool RebuildProgressFirst;
- bool RebuildFlagPending;
- bool RebuildStatusPending;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V1_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V1_CommandMailbox_T *LastCommandMailbox;
- DAC960_V1_CommandMailbox_T *NextCommandMailbox;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V1_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V1_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V1_StatusMailbox_T *LastStatusMailbox;
- DAC960_V1_StatusMailbox_T *NextStatusMailbox;
-
- DAC960_V1_DCDB_T *MonitoringDCDB;
- dma_addr_t MonitoringDCDB_DMA;
-
- DAC960_V1_Enquiry_T Enquiry;
- DAC960_V1_Enquiry_T *NewEnquiry;
- dma_addr_t NewEnquiryDMA;
-
- DAC960_V1_ErrorTable_T ErrorTable;
- DAC960_V1_ErrorTable_T *NewErrorTable;
- dma_addr_t NewErrorTableDMA;
-
- DAC960_V1_EventLogEntry_T *EventLogEntry;
- dma_addr_t EventLogEntryDMA;
-
- DAC960_V1_RebuildProgress_T *RebuildProgress;
- dma_addr_t RebuildProgressDMA;
- DAC960_V1_CommandStatus_T LastRebuildStatus;
- DAC960_V1_CommandStatus_T PendingRebuildStatus;
-
- DAC960_V1_LogicalDriveInformationArray_T LogicalDriveInformation;
- DAC960_V1_LogicalDriveInformationArray_T *NewLogicalDriveInformation;
- dma_addr_t NewLogicalDriveInformationDMA;
-
- DAC960_V1_BackgroundInitializationStatus_T
- *BackgroundInitializationStatus;
- dma_addr_t BackgroundInitializationStatusDMA;
- DAC960_V1_BackgroundInitializationStatus_T
- LastBackgroundInitializationStatus;
-
- DAC960_V1_DeviceState_T
- DeviceState[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_V1_DeviceState_T *NewDeviceState;
- dma_addr_t NewDeviceStateDMA;
-
- DAC960_SCSI_Inquiry_T
- InquiryStandardData[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_T *NewInquiryStandardData;
- dma_addr_t NewInquiryStandardDataDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- InquiryUnitSerialNumber[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
-
- int DeviceResetCount[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- bool DirectCommandActive[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets];
- } V1;
- struct {
- unsigned int StatusChangeCounter;
- unsigned int NextEventSequenceNumber;
- unsigned int PhysicalDeviceIndex;
- bool NeedLogicalDeviceInformation;
- bool NeedPhysicalDeviceInformation;
- bool NeedDeviceSerialNumberInformation;
- bool StartLogicalDeviceInformationScan;
- bool StartPhysicalDeviceInformationScan;
- struct dma_pool *RequestSensePool;
-
- dma_addr_t FirstCommandMailboxDMA;
- DAC960_V2_CommandMailbox_T *FirstCommandMailbox;
- DAC960_V2_CommandMailbox_T *LastCommandMailbox;
- DAC960_V2_CommandMailbox_T *NextCommandMailbox;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox1;
- DAC960_V2_CommandMailbox_T *PreviousCommandMailbox2;
-
- dma_addr_t FirstStatusMailboxDMA;
- DAC960_V2_StatusMailbox_T *FirstStatusMailbox;
- DAC960_V2_StatusMailbox_T *LastStatusMailbox;
- DAC960_V2_StatusMailbox_T *NextStatusMailbox;
-
- dma_addr_t HealthStatusBufferDMA;
- DAC960_V2_HealthStatusBuffer_T *HealthStatusBuffer;
-
- DAC960_V2_ControllerInfo_T ControllerInformation;
- DAC960_V2_ControllerInfo_T *NewControllerInformation;
- dma_addr_t NewControllerInformationDMA;
-
- DAC960_V2_LogicalDeviceInfo_T
- *LogicalDeviceInformation[DAC960_MaxLogicalDrives];
- DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInformation;
- dma_addr_t NewLogicalDeviceInformationDMA;
-
- DAC960_V2_PhysicalDeviceInfo_T
- *PhysicalDeviceInformation[DAC960_V2_MaxPhysicalDevices];
- DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInformation;
- dma_addr_t NewPhysicalDeviceInformationDMA;
-
- DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber;
- dma_addr_t NewInquiryUnitSerialNumberDMA;
- DAC960_SCSI_Inquiry_UnitSerialNumber_T
- *InquiryUnitSerialNumber[DAC960_V2_MaxPhysicalDevices];
-
- DAC960_V2_Event_T *Event;
- dma_addr_t EventDMA;
-
- DAC960_V2_PhysicalToLogicalDevice_T *PhysicalToLogicalDevice;
- dma_addr_t PhysicalToLogicalDeviceDMA;
-
- DAC960_V2_PhysicalDevice_T
- LogicalDriveToVirtualDevice[DAC960_MaxLogicalDrives];
- bool LogicalDriveFoundDuringScan[DAC960_MaxLogicalDrives];
- } V2;
- } FW;
- unsigned char ProgressBuffer[DAC960_ProgressBufferSize];
- unsigned char UserStatusBuffer[DAC960_UserMessageSize];
-}
-DAC960_Controller_T;
-
-
-/*
- Simplify access to Firmware Version Dependent Data Structure Components
- and Functions.
-*/
-
-#define V1 FW.V1
-#define V2 FW.V2
-#define DAC960_QueueCommand(Command) \
- (Controller->QueueCommand)(Command)
-#define DAC960_ReadControllerConfiguration(Controller) \
- (Controller->ReadControllerConfiguration)(Controller)
-#define DAC960_ReadDeviceConfiguration(Controller) \
- (Controller->ReadDeviceConfiguration)(Controller)
-#define DAC960_ReportDeviceConfiguration(Controller) \
- (Controller->ReportDeviceConfiguration)(Controller)
-#define DAC960_QueueReadWriteCommand(Command) \
- (Controller->QueueReadWriteCommand)(Command)
-
-/*
- * dma_addr_writeql is provided to write dma_addr_t types
- * to a 64-bit pci address space register. The controller
- * will accept having the register written as two 32-bit
- * values.
- *
- * In HIGHMEM kernels, dma_addr_t is a 64-bit value.
- * without HIGHMEM, dma_addr_t is a 32-bit value.
- *
- * The compiler should always fix up the assignment
- * to u.wq appropriately, depending upon the size of
- * dma_addr_t.
- */
-static inline
-void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address)
-{
- union {
- u64 wq;
- uint wl[2];
- } u;
-
- u.wq = addr;
-
- writel(u.wl[0], write_address);
- writel(u.wl[1], write_address + 4);
-}
-
-/*
- Define the DAC960 GEM Series Controller Interface Register Offsets.
- */
-
-#define DAC960_GEM_RegisterWindowSize 0x600
-
-typedef enum
-{
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset = 0x214,
- DAC960_GEM_InboundDoorBellRegisterClearOffset = 0x218,
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset = 0x224,
- DAC960_GEM_OutboundDoorBellRegisterClearOffset = 0x228,
- DAC960_GEM_InterruptStatusRegisterOffset = 0x208,
- DAC960_GEM_InterruptMaskRegisterReadSetOffset = 0x22C,
- DAC960_GEM_InterruptMaskRegisterClearOffset = 0x230,
- DAC960_GEM_CommandMailboxBusAddressOffset = 0x510,
- DAC960_GEM_CommandStatusOffset = 0x518,
- DAC960_GEM_ErrorStatusRegisterReadSetOffset = 0x224,
- DAC960_GEM_ErrorStatusRegisterClearOffset = 0x228,
-}
-DAC960_GEM_RegisterOffsets_T;
-
-/*
- Define the structure of the DAC960 GEM Series Inbound Door Bell
- */
-
-typedef union DAC960_GEM_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool HardwareMailboxNewCommand:1;
- bool AcknowledgeHardwareMailboxStatus:1;
- bool GenerateInterrupt:1;
- bool ControllerReset:1;
- bool MemoryMailboxNewCommand:1;
- unsigned int :3;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxFull:1;
- bool InitializationInProgress:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_InboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Outbound Door Bell Register.
- */
-typedef union DAC960_GEM_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- bool AcknowledgeHardwareMailboxInterrupt:1;
- bool AcknowledgeMemoryMailboxInterrupt:1;
- unsigned int :6;
- } Write;
- struct {
- unsigned int :24;
- bool HardwareMailboxStatusAvailable:1;
- bool MemoryMailboxStatusAvailable:1;
- unsigned int :6;
- } Read;
-}
-DAC960_GEM_OutboundDoorBellRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Interrupt Mask Register.
- */
-typedef union DAC960_GEM_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int :16;
- unsigned int :8;
- unsigned int HardwareMailboxInterrupt:1;
- unsigned int MemoryMailboxInterrupt:1;
- unsigned int :6;
- } Bits;
-}
-DAC960_GEM_InterruptMaskRegister_T;
-
-/*
- Define the structure of the DAC960 GEM Series Error Status Register.
- */
-
-typedef union DAC960_GEM_ErrorStatusRegister
-{
- unsigned int All;
- struct {
- unsigned int :24;
- unsigned int :5;
- bool ErrorStatusPending:1;
- unsigned int :2;
- } Bits;
-}
-DAC960_GEM_ErrorStatusRegister_T;
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 GEM Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_GEM_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-void DAC960_GEM_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_GEM_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InboundDoorBellRegisterReadSetOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset);
-}
-
-static inline
-bool DAC960_GEM_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_GEM_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_OutboundDoorBellRegisterReadSetOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_GEM_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterClearOffset);
-}
-
-static inline
-void DAC960_GEM_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true;
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterReadSetOffset);
-}
-
-static inline
-bool DAC960_GEM_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress +
- DAC960_GEM_InterruptMaskRegisterReadSetOffset);
- return !(InterruptMaskRegister.Bits.HardwareMailboxInterrupt ||
- InterruptMaskRegister.Bits.MemoryMailboxInterrupt);
-}
-
-static inline
-void DAC960_GEM_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_GEM_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_GEM_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_GEM_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_GEM_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_GEM_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_GEM_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readl(ControllerBaseAddress + DAC960_GEM_ErrorStatusRegisterReadSetOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 1);
- writel(0x03000000, ControllerBaseAddress +
- DAC960_GEM_ErrorStatusRegisterClearOffset);
- return true;
-}
-
-/*
- Define the DAC960 BA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_BA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_BA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_BA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_BA_InterruptStatusRegisterOffset = 0x30,
- DAC960_BA_InterruptMaskRegisterOffset = 0x34,
- DAC960_BA_CommandMailboxBusAddressOffset = 0x50,
- DAC960_BA_CommandStatusOffset = 0x58,
- DAC960_BA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_BA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_BA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_BA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_BA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- bool DisableInterruptsI2O:1; /* Bit 3 */
- unsigned int :4; /* Bits 4-7 */
- } Bits;
-}
-DAC960_BA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 BA Series Error Status Register.
-*/
-
-typedef union DAC960_BA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_BA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 BA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_BA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_BA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_BA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_BA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_BA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_BA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_BA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.DisableInterruptsI2O = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_BA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_BA_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-
-static inline
-void DAC960_BA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_BA_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_BA_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_BA_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_BA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_BA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LP Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LP_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LP_InboundDoorBellRegisterOffset = 0x20,
- DAC960_LP_OutboundDoorBellRegisterOffset = 0x2C,
- DAC960_LP_InterruptStatusRegisterOffset = 0x30,
- DAC960_LP_InterruptMaskRegisterOffset = 0x34,
- DAC960_LP_CommandMailboxBusAddressOffset = 0x10,
- DAC960_LP_CommandStatusOffset = 0x18,
- DAC960_LP_ErrorStatusRegisterOffset = 0x2E
-}
-DAC960_LP_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LP_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LP_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LP_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LP Series Error Status Register.
-*/
-
-typedef union DAC960_LP_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LP_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LP Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LP_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_LP_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_LP_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LP_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LP_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LP_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LP_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LP_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LP_WriteCommandMailbox(DAC960_V2_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V2_CommandMailbox_T
- *CommandMailbox)
-{
- memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1],
- sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int));
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LP_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- dma_addr_t CommandMailboxDMA)
-{
- dma_addr_writeql(CommandMailboxDMA,
- ControllerBaseAddress +
- DAC960_LP_CommandMailboxBusAddressOffset);
-}
-
-static inline DAC960_V2_CommandIdentifier_T
-DAC960_LP_ReadCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset);
-}
-
-static inline DAC960_V2_CommandStatus_T
-DAC960_LP_ReadCommandStatus(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset + 2);
-}
-
-static inline bool
-DAC960_LP_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LP_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 0);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 1);
- writeb(0xFF, ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset);
- return true;
-}
-
-
-/*
- Define the DAC960 LA Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_LA_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_LA_InboundDoorBellRegisterOffset = 0x60,
- DAC960_LA_OutboundDoorBellRegisterOffset = 0x61,
- DAC960_LA_InterruptMaskRegisterOffset = 0x34,
- DAC960_LA_CommandOpcodeRegisterOffset = 0x50,
- DAC960_LA_CommandIdentifierRegisterOffset = 0x51,
- DAC960_LA_MailboxRegister2Offset = 0x52,
- DAC960_LA_MailboxRegister3Offset = 0x53,
- DAC960_LA_MailboxRegister4Offset = 0x54,
- DAC960_LA_MailboxRegister5Offset = 0x55,
- DAC960_LA_MailboxRegister6Offset = 0x56,
- DAC960_LA_MailboxRegister7Offset = 0x57,
- DAC960_LA_MailboxRegister8Offset = 0x58,
- DAC960_LA_MailboxRegister9Offset = 0x59,
- DAC960_LA_MailboxRegister10Offset = 0x5A,
- DAC960_LA_MailboxRegister11Offset = 0x5B,
- DAC960_LA_MailboxRegister12Offset = 0x5C,
- DAC960_LA_StatusCommandIdentifierRegOffset = 0x5D,
- DAC960_LA_StatusRegisterOffset = 0x5E,
- DAC960_LA_ErrorStatusRegisterOffset = 0x63
-}
-DAC960_LA_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned char :3; /* Bits 5-7 */
- } Write;
- struct {
- bool HardwareMailboxEmpty:1; /* Bit 0 */
- bool InitializationNotInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_LA_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_LA_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_LA_InterruptMaskRegister
-{
- unsigned char All;
- struct {
- unsigned char :2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned char :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 LA Series Error Status Register.
-*/
-
-typedef union DAC960_LA_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_LA_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 LA Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_LA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.HardwareMailboxEmpty;
-}
-
-static inline
-bool DAC960_LA_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset);
- return !InboundDoorBellRegister.Read.InitializationNotInProgress;
-}
-
-static inline
-void DAC960_LA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_LA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_LA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_LA_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_LA_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0xFF;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- writeb(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_LA_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_LA_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_LA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_LA_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_LA_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_LA_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_LA_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_LA_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_LA_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_LA_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_LA_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_LA_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_LA_CommandIdentifierRegisterOffset);
- writeb(0xFF, ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PG Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PG_RegisterWindowSize 0x2000
-
-typedef enum
-{
- DAC960_PG_InboundDoorBellRegisterOffset = 0x0020,
- DAC960_PG_OutboundDoorBellRegisterOffset = 0x002C,
- DAC960_PG_InterruptMaskRegisterOffset = 0x0034,
- DAC960_PG_CommandOpcodeRegisterOffset = 0x1000,
- DAC960_PG_CommandIdentifierRegisterOffset = 0x1001,
- DAC960_PG_MailboxRegister2Offset = 0x1002,
- DAC960_PG_MailboxRegister3Offset = 0x1003,
- DAC960_PG_MailboxRegister4Offset = 0x1004,
- DAC960_PG_MailboxRegister5Offset = 0x1005,
- DAC960_PG_MailboxRegister6Offset = 0x1006,
- DAC960_PG_MailboxRegister7Offset = 0x1007,
- DAC960_PG_MailboxRegister8Offset = 0x1008,
- DAC960_PG_MailboxRegister9Offset = 0x1009,
- DAC960_PG_MailboxRegister10Offset = 0x100A,
- DAC960_PG_MailboxRegister11Offset = 0x100B,
- DAC960_PG_MailboxRegister12Offset = 0x100C,
- DAC960_PG_StatusCommandIdentifierRegOffset = 0x1018,
- DAC960_PG_StatusRegisterOffset = 0x101A,
- DAC960_PG_ErrorStatusRegisterOffset = 0x103F
-}
-DAC960_PG_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_InboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool HardwareMailboxNewCommand:1; /* Bit 0 */
- bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- bool MemoryMailboxNewCommand:1; /* Bit 4 */
- unsigned int :27; /* Bits 5-31 */
- } Write;
- struct {
- bool HardwareMailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PG_OutboundDoorBellRegister
-{
- unsigned int All;
- struct {
- bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */
- bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Write;
- struct {
- bool HardwareMailboxStatusAvailable:1; /* Bit 0 */
- bool MemoryMailboxStatusAvailable:1; /* Bit 1 */
- unsigned int :30; /* Bits 2-31 */
- } Read;
-}
-DAC960_PG_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Interrupt Mask Register.
-*/
-
-typedef union DAC960_PG_InterruptMaskRegister
-{
- unsigned int All;
- struct {
- unsigned int MessageUnitInterruptMask1:2; /* Bits 0-1 */
- bool DisableInterrupts:1; /* Bit 2 */
- unsigned int MessageUnitInterruptMask2:5; /* Bits 3-7 */
- unsigned int Reserved0:24; /* Bits 8-31 */
- } Bits;
-}
-DAC960_PG_InterruptMaskRegister_T;
-
-
-/*
- Define the structure of the DAC960 PG Series Error Status Register.
-*/
-
-typedef union DAC960_PG_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PG_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PG Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PG_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true;
- writel(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.HardwareMailboxFull;
-}
-
-static inline
-bool DAC960_PG_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PG_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PG_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true;
- OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true;
- writel(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable;
-}
-
-static inline
-bool DAC960_PG_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable;
-}
-
-static inline
-void DAC960_PG_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = false;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-void DAC960_PG_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All = 0;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3;
- InterruptMaskRegister.Bits.DisableInterrupts = true;
- InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F;
- writel(InterruptMaskRegister.All,
- ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
-}
-
-static inline
-bool DAC960_PG_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister;
- InterruptMaskRegister.All =
- readl(ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset);
- return !InterruptMaskRegister.Bits.DisableInterrupts;
-}
-
-static inline
-void DAC960_PG_WriteCommandMailbox(DAC960_V1_CommandMailbox_T
- *MemoryCommandMailbox,
- DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1];
- MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2];
- MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3];
- wmb();
- MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0];
- mb();
-}
-
-static inline
-void DAC960_PG_WriteHardwareMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PG_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PG_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PG_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PG_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PG_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PG_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PG_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PG_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PG_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PG_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset);
- return true;
-}
-
-/*
- Define the DAC960 PD Series Controller Interface Register Offsets.
-*/
-
-#define DAC960_PD_RegisterWindowSize 0x80
-
-typedef enum
-{
- DAC960_PD_CommandOpcodeRegisterOffset = 0x00,
- DAC960_PD_CommandIdentifierRegisterOffset = 0x01,
- DAC960_PD_MailboxRegister2Offset = 0x02,
- DAC960_PD_MailboxRegister3Offset = 0x03,
- DAC960_PD_MailboxRegister4Offset = 0x04,
- DAC960_PD_MailboxRegister5Offset = 0x05,
- DAC960_PD_MailboxRegister6Offset = 0x06,
- DAC960_PD_MailboxRegister7Offset = 0x07,
- DAC960_PD_MailboxRegister8Offset = 0x08,
- DAC960_PD_MailboxRegister9Offset = 0x09,
- DAC960_PD_MailboxRegister10Offset = 0x0A,
- DAC960_PD_MailboxRegister11Offset = 0x0B,
- DAC960_PD_MailboxRegister12Offset = 0x0C,
- DAC960_PD_StatusCommandIdentifierRegOffset = 0x0D,
- DAC960_PD_StatusRegisterOffset = 0x0E,
- DAC960_PD_ErrorStatusRegisterOffset = 0x3F,
- DAC960_PD_InboundDoorBellRegisterOffset = 0x40,
- DAC960_PD_OutboundDoorBellRegisterOffset = 0x41,
- DAC960_PD_InterruptEnableRegisterOffset = 0x43
-}
-DAC960_PD_RegisterOffsets_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Inbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_InboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool NewCommand:1; /* Bit 0 */
- bool AcknowledgeStatus:1; /* Bit 1 */
- bool GenerateInterrupt:1; /* Bit 2 */
- bool ControllerReset:1; /* Bit 3 */
- unsigned char :4; /* Bits 4-7 */
- } Write;
- struct {
- bool MailboxFull:1; /* Bit 0 */
- bool InitializationInProgress:1; /* Bit 1 */
- unsigned char :6; /* Bits 2-7 */
- } Read;
-}
-DAC960_PD_InboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Outbound Door Bell Register.
-*/
-
-typedef union DAC960_PD_OutboundDoorBellRegister
-{
- unsigned char All;
- struct {
- bool AcknowledgeInterrupt:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Write;
- struct {
- bool StatusAvailable:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Read;
-}
-DAC960_PD_OutboundDoorBellRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Interrupt Enable Register.
-*/
-
-typedef union DAC960_PD_InterruptEnableRegister
-{
- unsigned char All;
- struct {
- bool EnableInterrupts:1; /* Bit 0 */
- unsigned char :7; /* Bits 1-7 */
- } Bits;
-}
-DAC960_PD_InterruptEnableRegister_T;
-
-
-/*
- Define the structure of the DAC960 PD Series Error Status Register.
-*/
-
-typedef union DAC960_PD_ErrorStatusRegister
-{
- unsigned char All;
- struct {
- unsigned int :2; /* Bits 0-1 */
- bool ErrorStatusPending:1; /* Bit 2 */
- unsigned int :5; /* Bits 3-7 */
- } Bits;
-}
-DAC960_PD_ErrorStatusRegister_T;
-
-
-/*
- Define inline functions to provide an abstraction for reading and writing the
- DAC960 PD Series Controller Interface Registers.
-*/
-
-static inline
-void DAC960_PD_NewCommand(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.NewCommand = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_AcknowledgeStatus(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.AcknowledgeStatus = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_GenerateInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.GenerateInterrupt = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-void DAC960_PD_ControllerReset(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All = 0;
- InboundDoorBellRegister.Write.ControllerReset = true;
- writeb(InboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_MailboxFullP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.MailboxFull;
-}
-
-static inline
-bool DAC960_PD_InitializationInProgressP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister;
- InboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset);
- return InboundDoorBellRegister.Read.InitializationInProgress;
-}
-
-static inline
-void DAC960_PD_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All = 0;
- OutboundDoorBellRegister.Write.AcknowledgeInterrupt = true;
- writeb(OutboundDoorBellRegister.All,
- ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_StatusAvailableP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister;
- OutboundDoorBellRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset);
- return OutboundDoorBellRegister.Read.StatusAvailable;
-}
-
-static inline
-void DAC960_PD_EnableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = true;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-void DAC960_PD_DisableInterrupts(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All = 0;
- InterruptEnableRegister.Bits.EnableInterrupts = false;
- writeb(InterruptEnableRegister.All,
- ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
-}
-
-static inline
-bool DAC960_PD_InterruptsEnabledP(void __iomem *ControllerBaseAddress)
-{
- DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister;
- InterruptEnableRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset);
- return InterruptEnableRegister.Bits.EnableInterrupts;
-}
-
-static inline
-void DAC960_PD_WriteCommandMailbox(void __iomem *ControllerBaseAddress,
- DAC960_V1_CommandMailbox_T *CommandMailbox)
-{
- writel(CommandMailbox->Words[0],
- ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- writel(CommandMailbox->Words[1],
- ControllerBaseAddress + DAC960_PD_MailboxRegister4Offset);
- writel(CommandMailbox->Words[2],
- ControllerBaseAddress + DAC960_PD_MailboxRegister8Offset);
- writeb(CommandMailbox->Bytes[12],
- ControllerBaseAddress + DAC960_PD_MailboxRegister12Offset);
-}
-
-static inline DAC960_V1_CommandIdentifier_T
-DAC960_PD_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress)
-{
- return readb(ControllerBaseAddress
- + DAC960_PD_StatusCommandIdentifierRegOffset);
-}
-
-static inline DAC960_V1_CommandStatus_T
-DAC960_PD_ReadStatusRegister(void __iomem *ControllerBaseAddress)
-{
- return readw(ControllerBaseAddress + DAC960_PD_StatusRegisterOffset);
-}
-
-static inline bool
-DAC960_PD_ReadErrorStatus(void __iomem *ControllerBaseAddress,
- unsigned char *ErrorStatus,
- unsigned char *Parameter0,
- unsigned char *Parameter1)
-{
- DAC960_PD_ErrorStatusRegister_T ErrorStatusRegister;
- ErrorStatusRegister.All =
- readb(ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false;
- ErrorStatusRegister.Bits.ErrorStatusPending = false;
- *ErrorStatus = ErrorStatusRegister.All;
- *Parameter0 =
- readb(ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset);
- *Parameter1 =
- readb(ControllerBaseAddress + DAC960_PD_CommandIdentifierRegisterOffset);
- writeb(0, ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset);
- return true;
-}
-
-static inline void DAC960_P_To_PD_TranslateEnquiry(void *Enquiry)
-{
- memcpy(Enquiry + 132, Enquiry + 36, 64);
- memset(Enquiry + 36, 0, 96);
-}
-
-static inline void DAC960_P_To_PD_TranslateDeviceState(void *DeviceState)
-{
- memcpy(DeviceState + 2, DeviceState + 3, 1);
- memmove(DeviceState + 4, DeviceState + 5, 2);
- memmove(DeviceState + 6, DeviceState + 8, 4);
-}
-
-static inline
-void DAC960_PD_To_P_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Type5.LD.LogicalDriveNumber;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= CommandMailbox->Bytes[7] << 6;
- CommandMailbox->Bytes[7] = LogicalDriveNumber;
-}
-
-static inline
-void DAC960_P_To_PD_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T
- *CommandMailbox)
-{
- int LogicalDriveNumber = CommandMailbox->Bytes[7];
- CommandMailbox->Bytes[7] = CommandMailbox->Bytes[3] >> 6;
- CommandMailbox->Bytes[3] &= 0x7;
- CommandMailbox->Bytes[3] |= LogicalDriveNumber << 3;
-}
-
-
-/*
- Define prototypes for the forward referenced DAC960 Driver Internal Functions.
-*/
-
-static void DAC960_FinalizeController(DAC960_Controller_T *);
-static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *);
-static void DAC960_RequestFunction(struct request_queue *);
-static irqreturn_t DAC960_BA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LP_InterruptHandler(int, void *);
-static irqreturn_t DAC960_LA_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PG_InterruptHandler(int, void *);
-static irqreturn_t DAC960_PD_InterruptHandler(int, void *);
-static irqreturn_t DAC960_P_InterruptHandler(int, void *);
-static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *);
-static void DAC960_MonitoringTimerFunction(struct timer_list *);
-static void DAC960_Message(DAC960_MessageLevel_T, unsigned char *,
- DAC960_Controller_T *, ...);
-static void DAC960_CreateProcEntries(DAC960_Controller_T *);
-static void DAC960_DestroyProcEntries(DAC960_Controller_T *);
-
-#endif /* DAC960_DriverVersion */
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index d4913516823f..c1747f2953bc 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -121,18 +121,6 @@ source "drivers/block/mtip32xx/Kconfig"
source "drivers/block/zram/Kconfig"
-config BLK_DEV_DAC960
- tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
- depends on PCI
- help
- This driver adds support for the Mylex DAC960, AcceleRAID, and
- eXtremeRAID PCI RAID controllers. See the file
- <file:Documentation/blockdev/README.DAC960> for further information
- about this driver.
-
- To compile this driver as a module, choose M here: the
- module will be called DAC960.
-
config BLK_DEV_UMEM
tristate "Micro Memory MM5415 Battery Backed RAM support"
depends on PCI
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 8566b188368b..a53cc1e3a2d3 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o
obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o
obj-$(CONFIG_BLK_DEV_RAM) += brd.o
obj-$(CONFIG_BLK_DEV_LOOP) += loop.o
-obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
obj-$(CONFIG_SUNVDC) += sunvdc.o
--
2.16.4
next prev parent reply other threads:[~2018-10-12 7:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-12 7:15 [PATCHv5 0/3] Deprecate DAC960 driver Hannes Reinecke
2018-10-12 7:15 ` [PATCH 1/3] myrb: Add Mylex RAID controller (block interface) Hannes Reinecke
2018-10-17 7:26 ` Christoph Hellwig
2018-10-12 7:15 ` [PATCH 2/3] myrs: Add Mylex RAID controller (SCSI interface) Hannes Reinecke
2018-10-17 7:28 ` Christoph Hellwig
2018-10-12 7:15 ` Hannes Reinecke [this message]
2018-10-17 7:28 ` [PATCH 3/3] drivers/block: Remove DAC960 driver Christoph Hellwig
2018-10-12 13:38 ` [PATCHv5 0/3] Deprecate " Bart Van Assche
2018-10-12 16:39 ` Jens Axboe
2018-10-17 14:19 ` Jens Axboe
2018-10-17 22:49 ` Martin K. Petersen
-- strict thread matches above, loose matches on Subject: below --
2018-10-17 15:25 [PATCHv6 " Hannes Reinecke
2018-10-17 15:25 ` [PATCH 3/3] drivers/block: Remove " Hannes Reinecke
2018-10-09 15:26 [PATCHv4 0/3] Deprecate " Hannes Reinecke
2018-10-09 15:27 ` [PATCH 3/3] drivers/block: Remove " Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181012071548.129113-4-hare@suse.de \
--to=hare@suse.de \
--cc=axboe@kernel.dk \
--cc=hare@suse.com \
--cc=hch@lst.de \
--cc=james.bottomley@hansenpartnership.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.