From: Miquel Raynal <miquel.raynal@bootlin.com> To: Gregory Clement <gregory.clement@bootlin.com>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Jens Axboe <axboe@kernel.dk>, Hans de Goede <hdegoede@redhat.com> Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Antoine Tenart <antoine.tenart@bootlin.com>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, linux-ide@vger.kernel.org, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/7] ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs Date: Fri, 23 Nov 2018 11:15:52 +0100 [thread overview] Message-ID: <20181123101556.29888-4-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20181123101556.29888-1-miquel.raynal@bootlin.com> At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/ata/ahci_mvebu.c | 66 +++++++++++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 128d6f22926d..a1fce848bba9 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -28,6 +28,10 @@ #define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) #define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) +struct ahci_mvebu_plat_data { + int (*plat_config)(struct ahci_host_priv *hpriv); +}; + static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, const struct mbus_dram_target_info *dram) { @@ -62,6 +66,22 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); } +static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv) +{ + const struct mbus_dram_target_info *dram; + int rc = 0; + + dram = mv_mbus_dram_info(); + if (dram) + ahci_mvebu_mbus_config(hpriv, dram); + else + rc = -ENODEV; + + ahci_mvebu_regret_option(hpriv); + + return rc; +} + /** * ahci_mvebu_stop_engine * @@ -126,13 +146,10 @@ static int ahci_mvebu_resume(struct platform_device *pdev) { struct ata_host *host = platform_get_drvdata(pdev); struct ahci_host_priv *hpriv = host->private_data; - const struct mbus_dram_target_info *dram; + const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data; - dram = mv_mbus_dram_info(); - if (dram) - ahci_mvebu_mbus_config(hpriv, dram); - - ahci_mvebu_regret_option(hpriv); + if (pdata->plat_config) + pdata->plat_config(hpriv); return ahci_platform_resume_host(&pdev->dev); } @@ -154,28 +171,29 @@ static struct scsi_host_template ahci_platform_sht = { static int ahci_mvebu_probe(struct platform_device *pdev) { + const struct ahci_mvebu_plat_data *pdata; struct ahci_host_priv *hpriv; - const struct mbus_dram_target_info *dram; int rc; hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = (void *)of_device_get_match_data(&pdev->dev); + if (!hpriv->plat_data) + return -EINVAL; + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; hpriv->stop_engine = ahci_mvebu_stop_engine; - if (of_device_is_compatible(pdev->dev.of_node, - "marvell,armada-380-ahci")) { - dram = mv_mbus_dram_info(); - if (!dram) - return -ENODEV; - - ahci_mvebu_mbus_config(hpriv, dram); - ahci_mvebu_regret_option(hpriv); + pdata = hpriv->plat_data; + if (pdata->plat_config) { + rc = pdata->plat_config(hpriv); + if (rc) + goto disable_resources; } rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, @@ -190,9 +208,23 @@ static int ahci_mvebu_probe(struct platform_device *pdev) return rc; } +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { + .plat_config = ahci_mvebu_armada_380_config, +}; + +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { + .plat_config = NULL, +}; + static const struct of_device_id ahci_mvebu_of_match[] = { - { .compatible = "marvell,armada-380-ahci", }, - { .compatible = "marvell,armada-3700-ahci", }, + { + .compatible = "marvell,armada-380-ahci", + .data = &ahci_mvebu_armada_380_plat_data, + }, + { + .compatible = "marvell,armada-3700-ahci", + .data = &ahci_mvebu_armada_3700_plat_data, + }, { }, }; MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); -- 2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@bootlin.com (Miquel Raynal) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 3/7] ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs Date: Fri, 23 Nov 2018 11:15:52 +0100 [thread overview] Message-ID: <20181123101556.29888-4-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20181123101556.29888-1-miquel.raynal@bootlin.com> At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/ata/ahci_mvebu.c | 66 +++++++++++++++++++++++++++++----------- 1 file changed, 49 insertions(+), 17 deletions(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 128d6f22926d..a1fce848bba9 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -28,6 +28,10 @@ #define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4)) #define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4)) +struct ahci_mvebu_plat_data { + int (*plat_config)(struct ahci_host_priv *hpriv); +}; + static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv, const struct mbus_dram_target_info *dram) { @@ -62,6 +66,22 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA); } +static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv) +{ + const struct mbus_dram_target_info *dram; + int rc = 0; + + dram = mv_mbus_dram_info(); + if (dram) + ahci_mvebu_mbus_config(hpriv, dram); + else + rc = -ENODEV; + + ahci_mvebu_regret_option(hpriv); + + return rc; +} + /** * ahci_mvebu_stop_engine * @@ -126,13 +146,10 @@ static int ahci_mvebu_resume(struct platform_device *pdev) { struct ata_host *host = platform_get_drvdata(pdev); struct ahci_host_priv *hpriv = host->private_data; - const struct mbus_dram_target_info *dram; + const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data; - dram = mv_mbus_dram_info(); - if (dram) - ahci_mvebu_mbus_config(hpriv, dram); - - ahci_mvebu_regret_option(hpriv); + if (pdata->plat_config) + pdata->plat_config(hpriv); return ahci_platform_resume_host(&pdev->dev); } @@ -154,28 +171,29 @@ static struct scsi_host_template ahci_platform_sht = { static int ahci_mvebu_probe(struct platform_device *pdev) { + const struct ahci_mvebu_plat_data *pdata; struct ahci_host_priv *hpriv; - const struct mbus_dram_target_info *dram; int rc; hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv); + hpriv->plat_data = (void *)of_device_get_match_data(&pdev->dev); + if (!hpriv->plat_data) + return -EINVAL; + rc = ahci_platform_enable_resources(hpriv); if (rc) return rc; hpriv->stop_engine = ahci_mvebu_stop_engine; - if (of_device_is_compatible(pdev->dev.of_node, - "marvell,armada-380-ahci")) { - dram = mv_mbus_dram_info(); - if (!dram) - return -ENODEV; - - ahci_mvebu_mbus_config(hpriv, dram); - ahci_mvebu_regret_option(hpriv); + pdata = hpriv->plat_data; + if (pdata->plat_config) { + rc = pdata->plat_config(hpriv); + if (rc) + goto disable_resources; } rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info, @@ -190,9 +208,23 @@ static int ahci_mvebu_probe(struct platform_device *pdev) return rc; } +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = { + .plat_config = ahci_mvebu_armada_380_config, +}; + +static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = { + .plat_config = NULL, +}; + static const struct of_device_id ahci_mvebu_of_match[] = { - { .compatible = "marvell,armada-380-ahci", }, - { .compatible = "marvell,armada-3700-ahci", }, + { + .compatible = "marvell,armada-380-ahci", + .data = &ahci_mvebu_armada_380_plat_data, + }, + { + .compatible = "marvell,armada-3700-ahci", + .data = &ahci_mvebu_armada_3700_plat_data, + }, { }, }; MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match); -- 2.19.1
next prev parent reply other threads:[~2018-11-23 10:15 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-11-23 10:15 [PATCH 0/7] Bring suspend to RAM support to MVEBU SATA Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-23 10:15 ` [PATCH 1/7] ata: libahci_platform: comply to PHY framework Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-23 10:33 ` Hans de Goede 2018-11-23 10:33 ` Hans de Goede 2018-11-30 15:40 ` Miquel Raynal 2018-11-23 15:18 ` Andrew Lunn 2018-11-23 15:18 ` Andrew Lunn 2018-11-23 15:27 ` Russell King - ARM Linux 2018-11-23 15:27 ` Russell King - ARM Linux 2018-11-23 15:36 ` Andrew Lunn 2018-11-23 15:36 ` Andrew Lunn 2018-11-23 10:15 ` [PATCH 2/7] ata: ahci: mvebu: remove stale comment Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal [this message] 2018-11-23 10:15 ` [PATCH 3/7] ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs Miquel Raynal 2018-11-23 10:15 ` [PATCH 4/7] ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-23 10:15 ` [PATCH 5/7] ata: ahci: mvebu: add clock support Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-29 14:02 ` Miquel Raynal 2018-11-23 10:15 ` [PATCH 6/7] ARM64: dts: marvell: armada-37xx: declare SATA clock Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal 2018-11-23 10:15 ` [PATCH 7/7] ARM64: dts: marvell: armada-3720-espressobin: declare SATA PHY property Miquel Raynal 2018-11-23 10:15 ` Miquel Raynal
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181123101556.29888-4-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=andrew@lunn.ch \ --cc=antoine.tenart@bootlin.com \ --cc=axboe@kernel.dk \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=hdegoede@redhat.com \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-ide@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=maxime.chevallier@bootlin.com \ --cc=nadavh@marvell.com \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.