From: Vignesh R <vigneshr@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Date: Fri, 21 Dec 2018 12:08:25 +0530 [thread overview]
Message-ID: <20181221063836.11429-1-vigneshr@ti.com> (raw)
U-Boot SPI NOR support (sf layer) is quite outdated as it does not
support 4 byte addressing opcodes, SFDP table parsing and different types of
quad mode enable sequences. Many newer flashes no longer support BANK
registers used by sf layer to a access >16MB space.
Also, many SPI controllers have special MMIO interfaces which provide
accelerated read/write access but require knowledge of flash parameters
to make use of it. Recent spi-mem layer provides a way to support such
flashes but sf layer isn't using that.
This patch series syncs SPI NOR framework from Linux v4.19. It also adds
spi-mem support on top.
So, we gain 4byte addressing support and SFDP support. This makes
migrating to U-Boot MTD framework easier.
Tested with few Spansion, micron and macronix flashes with TI's dra7xx,
k2g, am43xx EVMs. I dont have access to flashes from other vendors. So,
I would greatly appreciate testing on other platforms. Complete series
with dependencies here[1]
For clean build on some platforms, depends on CONFIG_SPI_FLASH migration
to defconfigs [2]
[1] https://github.com/r-vignesh/u-boot.git branch: spi-nor-mig-patch-v2
[2] https://patchwork.ozlabs.org/patch/1007485/
Simon, Stefan, Thanks for testing previous versions.
I haven't carried Tested-by's here as I have added back SPI_FLASH_BAR
support (but isn't enabled by default). Would be great if you could
retest this series.
I am hoping there won't be any major rework/changes after this round.
Change log:
Since v1:
Remove #ifindef __UBOOT__
Add back BAR support, but dont enable as default for all platform (see
10/11 for more details)
Enable SPI_FLASH_TINY on boards where there is SPL size constraint as
seen on travis ci builds.
Drop sf_mtd changes for now as it seems to cause issues.
v1: https://patchwork.ozlabs.org/cover/1012146/
Since RFC v2:
Fix issues reported by Simon Goldschmidt wrt 4 use of byte addressing opcode
Fix issues in compiling SFDP code
Re organize file names and Makefile to simply spi-nor-tiny inclusion
Remove SPI_FLASH_BAR and SF_DUAL_FLASH as these are no longer used
RFC v2: https://patchwork.ozlabs.org/cover/1007589/
Since RFC v1:
Add lightweight SPI flash stack for boards with SPL size constraints
Provide non DM version of spi-mem
Fix build issues on different platforms as reported by travis-ci on v1
RFC v1: https://patchwork.ozlabs.org/cover/1004689/
Vignesh R (11):
spi-mem: Claim SPI bus before spi mem access
spi: Add non DM version of SPI_MEM
sh: bitops: add hweight*() macros
mtd: spi: Port SPI NOR framework from Linux
mtd: spi: Switch to new SPI NOR framework
mtd: spi: Remove unused files
mtd: spi: Add lightweight SPI flash stack for SPL
configs: Enable SPI_FLASH_TINY for resource constrained boards
configs: Remove SF_DUAL_FLASH
configs: Don't use SPI_FLASH_BAR as default
MAINTAINERS: Add an entry for SPI NOR
MAINTAINERS | 9 +
arch/arm/mach-omap2/am33xx/Kconfig | 1 -
arch/sh/include/asm/bitops.h | 4 +
common/spl/Kconfig | 21 +-
configs/alt_defconfig | 1 -
configs/am57xx_evm_defconfig | 1 -
configs/am57xx_hs_evm_defconfig | 1 -
configs/ap121_defconfig | 1 -
configs/ap143_defconfig | 1 -
configs/avnet_ultra96_rev1_defconfig | 1 -
configs/axm_defconfig | 1 +
configs/axs101_defconfig | 1 -
configs/axs103_defconfig | 1 -
configs/bg0900_defconfig | 1 -
configs/blanche_defconfig | 1 -
configs/cl-som-am57x_defconfig | 1 -
configs/clearfog_defconfig | 1 -
configs/cm_t43_defconfig | 1 -
configs/da850_am18xxevm_defconfig | 1 +
configs/da850evm_nand_defconfig | 2 +-
configs/db-88f6820-amc_defconfig | 1 -
configs/db-88f6820-gp_defconfig | 1 +
configs/display5_defconfig | 1 -
configs/display5_factory_defconfig | 1 -
configs/dra7xx_evm_defconfig | 1 -
configs/dra7xx_hs_evm_defconfig | 1 -
configs/ds109_defconfig | 1 -
configs/ds414_defconfig | 1 -
configs/evb-rv1108_defconfig | 1 -
configs/gose_defconfig | 1 -
configs/helios4_defconfig | 1 -
configs/k2g_evm_defconfig | 1 -
configs/k2g_hs_evm_defconfig | 1 -
configs/koelsch_defconfig | 1 -
configs/lager_defconfig | 1 -
configs/maxbcm_defconfig | 1 -
configs/mt7629_rfb_defconfig | 1 -
configs/mx6sxsabreauto_defconfig | 1 -
configs/mx6sxsabresd_defconfig | 1 -
configs/mx6ul_14x14_evk_defconfig | 1 -
configs/mx6ul_9x9_evk_defconfig | 1 -
configs/mx6ull_14x14_evk_defconfig | 1 -
configs/mx6ull_14x14_evk_plugin_defconfig | 1 -
configs/mx7dsabresd_qspi_defconfig | 1 -
configs/porter_defconfig | 2 +-
configs/r8a77970_eagle_defconfig | 1 -
configs/silk_defconfig | 1 -
configs/socfpga_arria5_defconfig | 1 -
configs/socfpga_cyclone5_defconfig | 1 -
configs/socfpga_is1_defconfig | 1 -
configs/socfpga_sockit_defconfig | 1 -
configs/socfpga_socrates_defconfig | 1 -
configs/socfpga_sr1500_defconfig | 1 -
configs/socfpga_stratix10_defconfig | 1 -
configs/stout_defconfig | 2 +-
configs/taurus_defconfig | 3 +-
configs/topic_miami_defconfig | 1 -
configs/topic_miamilite_defconfig | 2 -
configs/topic_miamiplus_defconfig | 2 -
configs/turris_omnia_defconfig | 2 +-
configs/xilinx_versal_virt_defconfig | 1 -
configs/xilinx_zynqmp_mini_qspi_defconfig | 2 -
configs/xilinx_zynqmp_zc1232_revA_defconfig | 2 -
configs/xilinx_zynqmp_zc1254_revA_defconfig | 2 -
configs/xilinx_zynqmp_zc1275_revA_defconfig | 2 -
configs/xilinx_zynqmp_zc1275_revB_defconfig | 2 -
.../xilinx_zynqmp_zc1751_xm015_dc1_defconfig | 1 -
.../xilinx_zynqmp_zc1751_xm016_dc2_defconfig | 1 -
.../xilinx_zynqmp_zc1751_xm018_dc4_defconfig | 1 -
configs/xilinx_zynqmp_zcu100_revC_defconfig | 1 -
configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 1 -
configs/xilinx_zynqmp_zcu102_revA_defconfig | 1 -
configs/xilinx_zynqmp_zcu102_revB_defconfig | 1 -
configs/xilinx_zynqmp_zcu104_revA_defconfig | 2 -
configs/xilinx_zynqmp_zcu104_revC_defconfig | 2 -
configs/xilinx_zynqmp_zcu106_revA_defconfig | 2 -
configs/xilinx_zynqmp_zcu111_revA_defconfig | 1 -
configs/zynq_cc108_defconfig | 1 -
configs/zynq_cse_qspi_defconfig | 1 -
configs/zynq_dlc20_rev1_0_defconfig | 1 -
configs/zynq_microzed_defconfig | 1 -
configs/zynq_minized_defconfig | 1 -
configs/zynq_z_turn_defconfig | 1 -
configs/zynq_zc702_defconfig | 1 -
configs/zynq_zc706_defconfig | 1 -
configs/zynq_zc770_xm010_defconfig | 1 -
configs/zynq_zc770_xm013_defconfig | 1 -
configs/zynq_zed_defconfig | 1 -
configs/zynq_zybo_defconfig | 1 -
configs/zynq_zybo_z7_defconfig | 1 -
doc/SPI/README.dual-flash | 92 -
doc/SPI/README.ti_qspi_dra_test | 1 -
drivers/mtd/spi/Kconfig | 16 +-
drivers/mtd/spi/Makefile | 12 +-
drivers/mtd/spi/sandbox.c | 36 +-
drivers/mtd/spi/sf_dataflash.c | 11 +-
drivers/mtd/spi/sf_internal.h | 225 +-
drivers/mtd/spi/sf_probe.c | 33 +-
drivers/mtd/spi/spi-nor-core.c | 2432 +++++++++++++++++
drivers/mtd/spi/spi-nor-ids.c | 297 ++
drivers/mtd/spi/spi-nor-tiny.c | 810 ++++++
drivers/mtd/spi/spi_flash.c | 1337 ---------
drivers/mtd/spi/spi_flash_ids.c | 211 --
drivers/spi/Kconfig | 9 +-
drivers/spi/Makefile | 1 +
drivers/spi/spi-mem-nodm.c | 89 +
drivers/spi/spi-mem.c | 6 +
drivers/spi/stm32_qspi.c | 4 +-
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 1 -
include/configs/T208xRDB.h | 1 -
include/configs/gw_ventana.h | 1 -
include/configs/km/kmp204x-common.h | 1 -
include/configs/ls1021aiot.h | 1 -
include/configs/socfpga_stratix10_socdk.h | 1 -
include/linux/mtd/cfi.h | 32 +
include/linux/mtd/spi-nor.h | 419 +++
include/spi_flash.h | 105 +-
120 files changed, 4266 insertions(+), 2058 deletions(-)
delete mode 100644 doc/SPI/README.dual-flash
create mode 100644 drivers/mtd/spi/spi-nor-core.c
create mode 100644 drivers/mtd/spi/spi-nor-ids.c
create mode 100644 drivers/mtd/spi/spi-nor-tiny.c
delete mode 100644 drivers/mtd/spi/spi_flash.c
delete mode 100644 drivers/mtd/spi/spi_flash_ids.c
create mode 100644 drivers/spi/spi-mem-nodm.c
create mode 100644 include/linux/mtd/cfi.h
create mode 100644 include/linux/mtd/spi-nor.h
--
2.20.1
next reply other threads:[~2018-12-21 6:38 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-21 6:38 Vignesh R [this message]
2018-12-21 6:38 ` [U-Boot] [PATCH v2 01/11] spi-mem: Claim SPI bus before spi mem access Vignesh R
2019-01-28 6:54 ` Jagan Teki
2019-01-28 9:44 ` Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 02/11] spi: Add non DM version of SPI_MEM Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 03/11] sh: bitops: add hweight*() macros Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 04/11] mtd: spi: Port SPI NOR framework from Linux Vignesh R
2019-01-27 18:48 ` Jagan Teki
2019-01-28 11:43 ` Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 05/11] mtd: spi: Switch to new SPI NOR framework Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 06/11] mtd: spi: Remove unused files Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 07/11] mtd: spi: Add lightweight SPI flash stack for SPL Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 08/11] configs: Enable SPI_FLASH_TINY for resource constrained boards Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 09/11] configs: Remove SF_DUAL_FLASH Vignesh R
2019-01-25 14:47 ` Jagan Teki
2019-01-25 15:01 ` Vignesh R
2019-01-28 6:36 ` Jagan Teki
2018-12-21 6:38 ` [U-Boot] [PATCH v2 10/11] configs: Don't use SPI_FLASH_BAR as default Vignesh R
2018-12-21 6:38 ` [U-Boot] [PATCH v2 11/11] MAINTAINERS: Add an entry for SPI NOR Vignesh R
2018-12-21 7:26 ` [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework Stefan Roese
2018-12-21 10:33 ` Simon Goldschmidt
2018-12-21 11:11 ` Vignesh R
2018-12-21 13:29 ` Simon Goldschmidt
2018-12-22 7:43 ` Simon Goldschmidt
2019-01-09 9:26 ` Vignesh R
2019-01-14 15:02 ` Vignesh R
2019-01-14 15:05 ` Tom Rini
2019-01-21 11:58 ` Vignesh R
2019-01-21 12:10 ` Jagan Teki
2019-01-21 14:47 ` Vignesh R
2019-01-21 17:08 ` Tom Rini
2019-01-22 6:25 ` Stefan Roese
2019-01-21 17:14 ` Horatiu Vultur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181221063836.11429-1-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.