All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philipp Puschmann <philipp.puschmann@emlix.com>
To: gregkh@linuxfoundation.org
Cc: robh+dt@kernel.org, mark.rutland@arm.com, Peter.Chen@nxp.com,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, philipp.puschmann@emlix.com
Subject: [PATCH v2,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
Date: Wed, 16 Jan 2019 11:51:02 +0100	[thread overview]
Message-ID: <20190116105103.28842-1-philipp.puschmann@emlix.com> (raw)
In-Reply-To: <20190115123113.20577-1-philipp.puschmann@emlix.com>

Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com>

---

V2: unchanged ...

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index adae82385dd6..8696e3eff6e7 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -93,6 +93,7 @@ i.mx specific properties
 - over-current-active-low: over current signal polarity is active low.
 - over-current-active-high: over current signal polarity is active high.
   It's recommended to specify the over current polarity.
+- power-active-high: power signal polarity is high active (only for imx6q/dl)
 - external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Example:
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Philipp Puschmann <philipp.puschmann@emlix.com>
To: gregkh@linuxfoundation.org
Cc: robh+dt@kernel.org, mark.rutland@arm.com, Peter.Chen@nxp.com,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, philipp.puschmann@emlix.com
Subject: [v2,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
Date: Wed, 16 Jan 2019 11:51:02 +0100	[thread overview]
Message-ID: <20190116105103.28842-1-philipp.puschmann@emlix.com> (raw)

Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com>
---

V2: unchanged ...

---
 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
index adae82385dd6..8696e3eff6e7 100644
--- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
@@ -93,6 +93,7 @@ i.mx specific properties
 - over-current-active-low: over current signal polarity is active low.
 - over-current-active-high: over current signal polarity is active high.
   It's recommended to specify the over current polarity.
+- power-active-high: power signal polarity is high active (only for imx6q/dl)
 - external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Example:

  parent reply	other threads:[~2019-01-16 10:51 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-15 12:31 [PATCH 1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high Philipp Puschmann
2019-01-15 12:31 ` [1/2] " Philipp Puschmann
2019-01-15 12:31 ` [PATCH 2/2] usb: chipidea: imx: set power polarity Philipp Puschmann
2019-01-15 12:31   ` [2/2] " Philipp Puschmann
2019-01-16 10:51 ` Philipp Puschmann [this message]
2019-01-16 10:51   ` [v2,1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high Philipp Puschmann
2019-01-16 10:51   ` [PATCH v2,2/2] usb: chipidea: imx: set power polarity Philipp Puschmann
2019-01-16 10:51     ` [v2,2/2] " Philipp Puschmann
2019-01-16 11:11     ` [PATCH v3 1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high Philipp Puschmann
2019-01-16 11:11       ` [v3,1/2] " Philipp Puschmann
2019-01-16 11:11       ` [PATCH v3 2/2] usb: chipidea: imx: set power polarity Philipp Puschmann
2019-01-16 11:11         ` [v3,2/2] " Philipp Puschmann
2019-01-16 19:51       ` [PATCH v3 1/2] dt-bindings: usb: ci-hdrc-usb2: add property power-active-high Rob Herring
2019-01-16 19:51         ` [v3,1/2] " Rob Herring
2019-01-16 19:51         ` [PATCH v3 1/2] " Rob Herring
2019-01-17  7:01       ` Peter Chen
2019-01-17  7:01         ` [v3,1/2] " Peter Chen
2019-01-21 18:00         ` [PATCH v3 1/2] " Philipp Puschmann
2019-01-21 18:00           ` [v3,1/2] " Philipp Puschmann
2019-01-22  7:50           ` [PATCH v3 1/2] " Peter Chen
2019-01-22  7:50             ` [v3,1/2] " Peter Chen
2019-01-16 16:32     ` [PATCH v2,2/2] usb: chipidea: imx: set power polarity Sergei Shtylyov
2019-01-16 16:32       ` [v2,2/2] " Sergei Shtylyov
2019-01-21 17:57       ` [PATCH v2,2/2] " Philipp Puschmann
2019-01-21 17:57         ` [v2,2/2] " Philipp Puschmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190116105103.28842-1-philipp.puschmann@emlix.com \
    --to=philipp.puschmann@emlix.com \
    --cc=Peter.Chen@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.