All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 13/13] drm/i915: Disable pipe gamma when C8 pixel format is used
Date: Thu, 17 Jan 2019 21:27:42 +0200	[thread overview]
Message-ID: <20190117192742.GI20097@intel.com> (raw)
In-Reply-To: <20190117191358.GN4563@mdroper-desk.amr.corp.intel.com>

On Thu, Jan 17, 2019 at 11:13:58AM -0800, Matt Roper wrote:
> On Fri, Jan 11, 2019 at 07:08:23PM +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Planes scanning out C8 will want to use the legacy lut as
> > their palette. That means the LUT content are unikely to
> > be useful for gamma correction on other planes. Thus we
> > should disable pipe gamma for all the other planes. And
> > we should reject any non legacy LUT configurations when
> > C8 planes are present.
> > 
> > Fixes the appearance of the hw cursor when running
> > X -depth 8.
> > 
> > Note that CHV with it's independent CGM degamma/gamma LUTs
> > could probably use the CGM for gamma correction even when
> > the legacy LUT is used for C8. But that would require a
> > new uapi for configuring the legacy LUT and CGM LUTs at
> > the same time. Totally not worth it.
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_atomic_plane.c | 5 +++++
> >  drivers/gpu/drm/i915/intel_color.c        | 8 +++++++-
> >  drivers/gpu/drm/i915/intel_drv.h          | 1 +
> >  3 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_atomic_plane.c b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > index 50be2c5dd76e..f311763867c4 100644
> > --- a/drivers/gpu/drm/i915/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/intel_atomic_plane.c
> > @@ -119,6 +119,7 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
> >  
> >  	new_crtc_state->active_planes &= ~BIT(plane->id);
> >  	new_crtc_state->nv12_planes &= ~BIT(plane->id);
> > +	new_crtc_state->c8_planes &= ~BIT(plane->id);
> >  	new_plane_state->base.visible = false;
> >  
> >  	if (!new_plane_state->base.crtc && !old_plane_state->base.crtc)
> > @@ -136,6 +137,10 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
> >  	    new_plane_state->base.fb->format->format == DRM_FORMAT_NV12)
> >  		new_crtc_state->nv12_planes |= BIT(plane->id);
> >  
> > +	if (new_plane_state->base.visible &&
> > +	    new_plane_state->base.fb->format->format == DRM_FORMAT_C8)
> > +		new_crtc_state->c8_planes |= BIT(plane->id);
> > +
> >  	if (new_plane_state->base.visible || old_plane_state->base.visible)
> >  		new_crtc_state->update_planes |= BIT(plane->id);
> >  
> > diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
> > index 789b04bb51d2..c8d12653d77f 100644
> > --- a/drivers/gpu/drm/i915/intel_color.c
> > +++ b/drivers/gpu/drm/i915/intel_color.c
> > @@ -691,7 +691,13 @@ int intel_color_check(struct intel_crtc_state *crtc_state)
> >  	degamma_length = INTEL_INFO(dev_priv)->color.degamma_lut_size;
> >  	gamma_length = INTEL_INFO(dev_priv)->color.gamma_lut_size;
> >  
> > -	crtc_state->gamma_enable = gamma_lut || degamma_lut;
> > +	/* C8 needs the legacy LUT all to itself */
> > +	if (crtc_state->c8_planes &&
> > +	    !crtc_state_is_legacy_gamma(crtc_state))
> > +		return -EINVAL;
> > +
> > +	crtc_state->gamma_enable = (gamma_lut || degamma_lut) &&
> > +		!crtc_state->c8_planes;
> 
> It's not really clear to me from the bspec...the legacy gamma will still
> get used as the c8 palette even when the pipe gamma enable bit is off
> for the plane?

Yes. At least it did on all the platforms I tried, which IIRC
were quite a few.

> If so,
> 
> Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
> 
> >  
> >  	if (INTEL_GEN(dev_priv) >= 9 ||
> >  	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index a4496f799af3..4d9ea05a6825 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -930,6 +930,7 @@ struct intel_crtc_state {
> >  	/* bitmask of visible planes (enum plane_id) */
> >  	u8 active_planes;
> >  	u8 nv12_planes;
> > +	u8 c8_planes;
> >  
> >  	/* bitmask of planes that will be updated during the commit */
> >  	u8 update_planes;
> > -- 
> > 2.19.2
> > 
> 
> -- 
> Matt Roper
> Graphics Software Engineer
> IoTG Platform Enabling & Development
> Intel Corporation
> (916) 356-2795

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-01-17 19:27 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 17:08 [PATCH 00/13] Enable/disable gamma/csc dynamically and fix C8 Ville Syrjala
2019-01-11 17:08 ` [PATCH 01/13] drm/i915: Clean up intel_plane_atomic_check_with_state() Ville Syrjala
2019-01-12  0:41   ` Matt Roper
2019-01-16 16:08   ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 02/13] drm/i915: Split the gamma/csc enable bits from the plane_ctl() function Ville Syrjala
2019-01-12  0:41   ` Matt Roper
2019-01-14 17:11     ` Ville Syrjälä
2019-01-14 19:11       ` Ville Syrjälä
2019-01-16 17:11         ` Shankar, Uma
2019-01-17 16:34           ` Ville Syrjälä
2019-01-11 17:08 ` [PATCH 03/13] drm/i915: Precompute gamma_mode Ville Syrjala
2019-01-12  0:41   ` Matt Roper
2019-01-16 17:18     ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 04/13] drm/i915: Constify the state arguments to the color management stuff Ville Syrjala
2019-01-12  0:42   ` Matt Roper
2019-01-16 17:21     ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 05/13] drm/i915: Pull GAMMA_MODE write out from haswell_load_luts() Ville Syrjala
2019-01-12  0:57   ` Matt Roper
2019-01-16 17:26     ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 06/13] drm/i915: Split color mgmt based on single vs. double buffered registers Ville Syrjala
2019-01-15  0:56   ` Matt Roper
2019-01-16 18:22     ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 07/13] drm/i915: Move LUT programming to happen after vblank waits Ville Syrjala
2019-01-16 17:38   ` Matt Roper
2019-01-16 18:02     ` Ville Syrjälä
2019-01-17 15:00     ` Ville Syrjälä
2019-01-11 17:08 ` [PATCH 08/13] drm/i915: Populate gamma_mode for all platforms Ville Syrjala
2019-01-16 18:31   ` Matt Roper
2019-01-16 18:58     ` Ville Syrjälä
2019-01-16 19:51       ` Ville Syrjälä
2019-01-29 15:59         ` Ville Syrjälä
2019-01-11 17:08 ` [PATCH 09/13] drm/i915: Track pipe gamma enable/disable in crtc state Ville Syrjala
2019-01-16 19:36   ` Matt Roper
2019-01-17  5:14     ` Shankar, Uma
2019-01-17 14:57       ` Ville Syrjälä
2019-01-11 17:08 ` [PATCH 10/13] drm/i915: Track pipe csc enable " Ville Syrjala
2019-01-16 19:43   ` Matt Roper
2019-01-17  5:17     ` Shankar, Uma
2019-01-11 17:08 ` [PATCH 11/13] drm/i915: Turn off pipe gamma when it's not needed Ville Syrjala
2019-01-17  5:32   ` Shankar, Uma
2019-01-17 18:40   ` Matt Roper
2019-01-17 18:48     ` Ville Syrjälä
2019-01-11 17:08 ` [PATCH 12/13] drm/i915: Turn off pipe CSC " Ville Syrjala
2019-01-17  5:37   ` Shankar, Uma
2019-01-17 18:54   ` Matt Roper
2019-01-11 17:08 ` [PATCH 13/13] drm/i915: Disable pipe gamma when C8 pixel format is used Ville Syrjala
2019-01-17  5:58   ` Shankar, Uma
2019-01-17 19:13   ` Matt Roper
2019-01-17 19:27     ` Ville Syrjälä [this message]
2019-01-11 17:25 ` ✗ Fi.CI.CHECKPATCH: warning for Enable/disable gamma/csc dynamically and fix C8 Patchwork
2019-01-11 17:44 ` ✓ Fi.CI.BAT: success " Patchwork
2019-01-11 22:03 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190117192742.GI20097@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=matthew.d.roper@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.