[RFCv1 2/3] ARM: dts: meson8b: odroidc1: fix USB power supplies for phy

[Anand Moon <linux.amoon@gmail.com>]

This patch enables the USB Host controller (USB0) and the relative USB0 PHY.
>From the shematics GPIOAO.BIT5 gpio input for the PWREN signal of the
USB_OTG controller (usb0) which is also linked to USB_HOST controller (usb1).
Add missing phy-supply link to both  USB0 and USB1 phy controller
This changes fixed the power issue on usb ports. Changes help fix usb reset warning.

[  821.991470] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  825.243385] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  828.151310] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[  830.991241] usb 1-1.2: reset high-speed USB device number 3 using dwc2

Fixes: 2eb79a4d15ff ("ARM: dts: meson: enabling the USB Host controller on Odroid-C1/C1+ board")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous patch.

Fix the subject and commit message as per Martin's request
 --Add the signal name in the comment
 --Replace vbus-supply with phy-supply linking the power supply to phy node as pointed by Marine
   which a PWREN signal in the USB_HOST controller (usb1)

USB_VBUS                      4    2      0 unknown  5000mV     0mA  5000mV  5000mV
   phy-c1108820.phy.1         2                                 0mA     0mV     0mV
   phy-c1108800.phy.0         2                                 0mA     0mV     0mV
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index 58669abda259..bfa472a679d9 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -83,6 +83,22 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&p5v0>;
+
+		/*
+		 * signal name from schematics: PWREN
+		 */
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	tflash_vdd: regulator-tflash_vdd {
 		/*
 		 * signal name from schematics: TFLASH_VDD_EN
@@ -295,8 +311,18 @@
 	pinctrl-names = "default";
 };
 
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
 &usb1_phy {
 	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb0 {
+	status = "okay";
 };
 
 &usb1 {
-- 
2.20.1