All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	David Lechner <david@lechnology.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 1/4] ARM: davinci: fix cpufreq registration on da850-evm
Date: Thu, 21 Mar 2019 15:10:07 +0100	[thread overview]
Message-ID: <20190321141010.19612-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190321141010.19612-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The system_rev variable is never set on davinci and is always 0, so
we're using the default max operating point of 300MHz. The cvdd supply
is fixed at 1.2V however, so we can go up to 372MHz. Remove the switch
and always set da850_max_speed to 372000.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1fdc9283a8c5..77d74fb311fa 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1155,17 +1155,7 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
 #ifdef CONFIG_CPU_FREQ
 static __init int da850_evm_init_cpufreq(void)
 {
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
+	da850_max_speed = 372000;
 
 	return da850_register_cpufreq("pll0_sysclk3");
 }
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	David Lechner <david@lechnology.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 1/4] ARM: davinci: fix cpufreq registration on da850-evm
Date: Thu, 21 Mar 2019 15:10:07 +0100	[thread overview]
Message-ID: <20190321141010.19612-2-brgl@bgdev.pl> (raw)
In-Reply-To: <20190321141010.19612-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The system_rev variable is never set on davinci and is always 0, so
we're using the default max operating point of 300MHz. The cvdd supply
is fixed at 1.2V however, so we can go up to 372MHz. Remove the switch
and always set da850_max_speed to 372000.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 arch/arm/mach-davinci/board-da850-evm.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1fdc9283a8c5..77d74fb311fa 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1155,17 +1155,7 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
 #ifdef CONFIG_CPU_FREQ
 static __init int da850_evm_init_cpufreq(void)
 {
-	switch (system_rev & 0xF) {
-	case 3:
-		da850_max_speed = 456000;
-		break;
-	case 2:
-		da850_max_speed = 408000;
-		break;
-	case 1:
-		da850_max_speed = 372000;
-		break;
-	}
+	da850_max_speed = 372000;
 
 	return da850_register_cpufreq("pll0_sysclk3");
 }
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-03-21 14:10 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-21 14:10 [PATCH 0/4] ARM: da850: enable cpufreq in DT mode Bartosz Golaszewski
2019-03-21 14:10 ` Bartosz Golaszewski
2019-03-21 14:10 ` Bartosz Golaszewski [this message]
2019-03-21 14:10   ` [PATCH 1/4] ARM: davinci: fix cpufreq registration on da850-evm Bartosz Golaszewski
2019-03-21 14:10 ` [PATCH 2/4] ARM: dts: da850: add cpu node and operating points to DT Bartosz Golaszewski
2019-03-21 14:10   ` Bartosz Golaszewski
2019-03-21 15:56   ` David Lechner
2019-03-21 15:56     ` David Lechner
2019-03-21 14:10 ` [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq Bartosz Golaszewski
2019-03-21 14:10   ` Bartosz Golaszewski
2019-03-21 15:53   ` David Lechner
2019-03-21 15:53     ` David Lechner
2019-03-21 16:36     ` Bartosz Golaszewski
2019-03-21 16:36       ` Bartosz Golaszewski
2019-03-21 16:43       ` Bartosz Golaszewski
2019-03-21 16:43         ` Bartosz Golaszewski
2019-03-21 17:13         ` Bartosz Golaszewski
2019-03-21 17:13           ` Bartosz Golaszewski
2019-03-21 14:10 ` [PATCH 4/4] ARM: davinci_all_defconfig: Enable CPUFREQ_DT Bartosz Golaszewski
2019-03-21 14:10   ` Bartosz Golaszewski
2019-03-21 15:29 ` [PATCH 0/4] ARM: da850: enable cpufreq in DT mode David Lechner
2019-03-21 15:29   ` David Lechner
2019-03-21 15:40   ` Bartosz Golaszewski
2019-03-21 15:40     ` Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190321141010.19612-2-brgl@bgdev.pl \
    --to=brgl@bgdev.pl \
    --cc=bgolaszewski@baylibre.com \
    --cc=david@lechnology.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.