From: Bartosz Golaszewski <brgl@bgdev.pl> To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, David Lechner <david@lechnology.com> Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Bartosz Golaszewski <bgolaszewski@baylibre.com> Subject: [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq Date: Thu, 21 Mar 2019 15:10:09 +0100 [thread overview] Message-ID: <20190321141010.19612-4-brgl@bgdev.pl> (raw) In-Reply-To: <20190321141010.19612-1-brgl@bgdev.pl> From: Bartosz Golaszewski <bgolaszewski@baylibre.com> Enable cpufreq-dt support for da850-evm. The cvdd regulator is fixed at 1.2V on this board so disable the lower operating points and enable the 375MHz opp. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850-evm.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f04bc3e15332..f63867692da4 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -151,6 +151,15 @@ system-clock-frequency = <24576000>; }; }; + + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &ecap2 { @@ -191,6 +200,27 @@ }; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* + * DA850-EVM has a fixed CVDD of 1.2V - we cannot go below 300MHz or + * above 375MHz. + */ + +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +&opp_375 { + status = "okay"; +}; + &sata { status = "okay"; }; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Bartosz Golaszewski <brgl@bgdev.pl> To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, David Lechner <david@lechnology.com> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Bartosz Golaszewski <bgolaszewski@baylibre.com> Subject: [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq Date: Thu, 21 Mar 2019 15:10:09 +0100 [thread overview] Message-ID: <20190321141010.19612-4-brgl@bgdev.pl> (raw) In-Reply-To: <20190321141010.19612-1-brgl@bgdev.pl> From: Bartosz Golaszewski <bgolaszewski@baylibre.com> Enable cpufreq-dt support for da850-evm. The cvdd regulator is fixed at 1.2V on this board so disable the lower operating points and enable the 375MHz opp. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> --- arch/arm/boot/dts/da850-evm.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index f04bc3e15332..f63867692da4 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -151,6 +151,15 @@ system-clock-frequency = <24576000>; }; }; + + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; }; &ecap2 { @@ -191,6 +200,27 @@ }; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* + * DA850-EVM has a fixed CVDD of 1.2V - we cannot go below 300MHz or + * above 375MHz. + */ + +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +&opp_375 { + status = "okay"; +}; + &sata { status = "okay"; }; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-21 14:10 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-21 14:10 [PATCH 0/4] ARM: da850: enable cpufreq in DT mode Bartosz Golaszewski 2019-03-21 14:10 ` Bartosz Golaszewski 2019-03-21 14:10 ` [PATCH 1/4] ARM: davinci: fix cpufreq registration on da850-evm Bartosz Golaszewski 2019-03-21 14:10 ` Bartosz Golaszewski 2019-03-21 14:10 ` [PATCH 2/4] ARM: dts: da850: add cpu node and operating points to DT Bartosz Golaszewski 2019-03-21 14:10 ` Bartosz Golaszewski 2019-03-21 15:56 ` David Lechner 2019-03-21 15:56 ` David Lechner 2019-03-21 14:10 ` Bartosz Golaszewski [this message] 2019-03-21 14:10 ` [PATCH 3/4] ARM: dts: da850-evm: enable cpufreq Bartosz Golaszewski 2019-03-21 15:53 ` David Lechner 2019-03-21 15:53 ` David Lechner 2019-03-21 16:36 ` Bartosz Golaszewski 2019-03-21 16:36 ` Bartosz Golaszewski 2019-03-21 16:43 ` Bartosz Golaszewski 2019-03-21 16:43 ` Bartosz Golaszewski 2019-03-21 17:13 ` Bartosz Golaszewski 2019-03-21 17:13 ` Bartosz Golaszewski 2019-03-21 14:10 ` [PATCH 4/4] ARM: davinci_all_defconfig: Enable CPUFREQ_DT Bartosz Golaszewski 2019-03-21 14:10 ` Bartosz Golaszewski 2019-03-21 15:29 ` [PATCH 0/4] ARM: da850: enable cpufreq in DT mode David Lechner 2019-03-21 15:29 ` David Lechner 2019-03-21 15:40 ` Bartosz Golaszewski 2019-03-21 15:40 ` Bartosz Golaszewski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190321141010.19612-4-brgl@bgdev.pl \ --to=brgl@bgdev.pl \ --cc=bgolaszewski@baylibre.com \ --cc=david@lechnology.com \ --cc=devicetree@vger.kernel.org \ --cc=khilman@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.