From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Stephen Boyd <sboyd@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>, Claudiu Beznea <claudiu.beznea@microchip.com>, Michael Turquette <mturquette@baylibre.com>, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH v3 0/7] clk: at91: add sam9x60 pmc clock support Date: Tue, 2 Apr 2019 14:50:49 +0200 [thread overview] Message-ID: <20190402125056.21509-1-alexandre.belloni@bootlin.com> (raw) This series add support for the sam9x60 clocks handled by the PMC. The first four patches are preparatory patches to handle register layout and offset differences. Then, a driver for the new interface for PLLs is added and the final patch is the driver for the sam9x60 PMC. This supersedes https://patchwork.kernel.org/project/linux-clk/list/?series=82811 and https://patchwork.kernel.org/project/linux-clk/list/?series=100115 changes in v2: - rebased on v5.1-rc1 - changed the PLL_ACR handling to conform to the datasheet errata changes in v3: - remove unrelated patches Alexandre Belloni (7): clk: at91: allow configuring peripheral PCR layout clk: at91: allow configuring generated PCR layout clk: at91: usb: Add sam9x60 support clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 PLL driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc driver .../devicetree/bindings/clock/at91-clock.txt | 3 +- drivers/clk/at91/Makefile | 2 + drivers/clk/at91/at91sam9x5.c | 9 + drivers/clk/at91/clk-generated.c | 48 +-- drivers/clk/at91/clk-master.c | 8 +- drivers/clk/at91/clk-peripheral.c | 46 +-- drivers/clk/at91/clk-sam9x60-pll.c | 330 ++++++++++++++++++ drivers/clk/at91/clk-usb.c | 33 +- drivers/clk/at91/dt-compat.c | 12 +- drivers/clk/at91/pmc.h | 23 ++ drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++ drivers/clk/at91/sama5d2.c | 10 + drivers/clk/at91/sama5d4.c | 8 + include/linux/clk/at91_pmc.h | 12 +- 14 files changed, 786 insertions(+), 65 deletions(-) create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c create mode 100644 drivers/clk/at91/sam9x60.c -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Stephen Boyd <sboyd@kernel.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>, Michael Turquette <mturquette@baylibre.com>, linux-kernel@vger.kernel.org, Claudiu Beznea <claudiu.beznea@microchip.com>, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/7] clk: at91: add sam9x60 pmc clock support Date: Tue, 2 Apr 2019 14:50:49 +0200 [thread overview] Message-ID: <20190402125056.21509-1-alexandre.belloni@bootlin.com> (raw) This series add support for the sam9x60 clocks handled by the PMC. The first four patches are preparatory patches to handle register layout and offset differences. Then, a driver for the new interface for PLLs is added and the final patch is the driver for the sam9x60 PMC. This supersedes https://patchwork.kernel.org/project/linux-clk/list/?series=82811 and https://patchwork.kernel.org/project/linux-clk/list/?series=100115 changes in v2: - rebased on v5.1-rc1 - changed the PLL_ACR handling to conform to the datasheet errata changes in v3: - remove unrelated patches Alexandre Belloni (7): clk: at91: allow configuring peripheral PCR layout clk: at91: allow configuring generated PCR layout clk: at91: usb: Add sam9x60 support clk: at91: master: Add sam9x60 support clk: at91: add sam9x60 PLL driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 pmc driver .../devicetree/bindings/clock/at91-clock.txt | 3 +- drivers/clk/at91/Makefile | 2 + drivers/clk/at91/at91sam9x5.c | 9 + drivers/clk/at91/clk-generated.c | 48 +-- drivers/clk/at91/clk-master.c | 8 +- drivers/clk/at91/clk-peripheral.c | 46 +-- drivers/clk/at91/clk-sam9x60-pll.c | 330 ++++++++++++++++++ drivers/clk/at91/clk-usb.c | 33 +- drivers/clk/at91/dt-compat.c | 12 +- drivers/clk/at91/pmc.h | 23 ++ drivers/clk/at91/sam9x60.c | 307 ++++++++++++++++ drivers/clk/at91/sama5d2.c | 10 + drivers/clk/at91/sama5d4.c | 8 + include/linux/clk/at91_pmc.h | 12 +- 14 files changed, 786 insertions(+), 65 deletions(-) create mode 100644 drivers/clk/at91/clk-sam9x60-pll.c create mode 100644 drivers/clk/at91/sam9x60.c -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-04-02 12:51 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-04-02 12:50 Alexandre Belloni [this message] 2019-04-02 12:50 ` [PATCH v3 0/7] clk: at91: add sam9x60 pmc clock support Alexandre Belloni 2019-04-02 12:50 ` [PATCH v3 1/7] clk: at91: allow configuring peripheral PCR layout Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:36 ` Stephen Boyd 2019-04-25 19:36 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 2/7] clk: at91: allow configuring generated " Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:37 ` Stephen Boyd 2019-04-25 19:37 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 3/7] clk: at91: usb: Add sam9x60 support Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:37 ` Stephen Boyd 2019-04-25 19:37 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 4/7] clk: at91: master: " Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:37 ` Stephen Boyd 2019-04-25 19:37 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 5/7] clk: at91: add sam9x60 PLL driver Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:37 ` Stephen Boyd 2019-04-25 19:37 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 6/7] dt-bindings: clk: at91: add bindings for SAM9X60 pmc Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:37 ` Stephen Boyd 2019-04-25 19:37 ` Stephen Boyd 2019-04-02 12:50 ` [PATCH v3 7/7] clk: at91: add sam9x60 pmc driver Alexandre Belloni 2019-04-02 12:50 ` Alexandre Belloni 2019-04-25 19:38 ` Stephen Boyd 2019-04-25 19:38 ` Stephen Boyd 2019-04-25 20:31 ` Alexandre Belloni 2019-04-25 20:31 ` Alexandre Belloni 2019-04-25 20:58 ` Stephen Boyd 2019-04-25 20:58 ` Stephen Boyd 2019-04-25 21:10 ` Alexandre Belloni 2019-04-25 21:10 ` Alexandre Belloni 2019-04-25 21:20 ` Stephen Boyd 2019-04-25 21:20 ` Stephen Boyd 2019-04-26 21:06 ` Alexandre Belloni 2019-04-26 21:06 ` Alexandre Belloni 2019-04-26 22:02 ` Stephen Boyd 2019-04-26 22:02 ` Stephen Boyd 2019-04-25 21:14 ` Stephen Boyd 2019-04-25 21:14 ` Stephen Boyd 2019-04-26 20:52 ` Alexandre Belloni 2019-04-26 20:52 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190402125056.21509-1-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=claudiu.beznea@microchip.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=nicolas.ferre@microchip.com \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.