From: "Clément Péron" <peron.clem@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
Jagan Teki <jagan@amarulasolutions.com>,
Jernej Skrabec <jernej.skrabec@siol.net>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com,
"Clément Péron" <peron.clem@gmail.com>
Subject: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
Date: Thu, 11 Apr 2019 23:44:19 +0200 [thread overview]
Message-ID: <20190411214422.2267-2-peron.clem@gmail.com> (raw)
In-Reply-To: <20190411214422.2267-1-peron.clem@gmail.com>
Allwinner H6 has a SPDIF controller with an increase of the fifo
size and the possibility to output the master clock.
However it's still compatible with the already existing driver for
Allwiner H3.
Add this compatible in the device-tree bindings documentation.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0c64a209c2e9..e33180354dce 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -7,10 +7,11 @@ For now only playback is supported.
Required properties:
- - compatible : should be one of the following:
+ - compatible : Should be one of the following:
- "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
- "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
- "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
+ - "allwinner,sun50i-h6-spdif", "allwinner,sun8i-h3-spdif": for H6 SoC
- reg : Offset and length of the register set for the device.
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
"Clément Péron"
<peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
Date: Thu, 11 Apr 2019 23:44:19 +0200 [thread overview]
Message-ID: <20190411214422.2267-2-peron.clem@gmail.com> (raw)
In-Reply-To: <20190411214422.2267-1-peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Allwinner H6 has a SPDIF controller with an increase of the fifo
size and the possibility to output the master clock.
However it's still compatible with the already existing driver for
Allwiner H3.
Add this compatible in the device-tree bindings documentation.
Signed-off-by: Clément Péron <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0c64a209c2e9..e33180354dce 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -7,10 +7,11 @@ For now only playback is supported.
Required properties:
- - compatible : should be one of the following:
+ - compatible : Should be one of the following:
- "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
- "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
- "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
+ - "allwinner,sun50i-h6-spdif", "allwinner,sun8i-h3-spdif": for H6 SoC
- reg : Offset and length of the register set for the device.
--
2.17.1
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: "Clément Péron" <peron.clem@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Icenowy Zheng <icenowy@aosc.io>,
Jagan Teki <jagan@amarulasolutions.com>,
Jernej Skrabec <jernej.skrabec@siol.net>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
"Clément Péron" <peron.clem@gmail.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible
Date: Thu, 11 Apr 2019 23:44:19 +0200 [thread overview]
Message-ID: <20190411214422.2267-2-peron.clem@gmail.com> (raw)
In-Reply-To: <20190411214422.2267-1-peron.clem@gmail.com>
Allwinner H6 has a SPDIF controller with an increase of the fifo
size and the possibility to output the master clock.
However it's still compatible with the already existing driver for
Allwiner H3.
Add this compatible in the device-tree bindings documentation.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 0c64a209c2e9..e33180354dce 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
@@ -7,10 +7,11 @@ For now only playback is supported.
Required properties:
- - compatible : should be one of the following:
+ - compatible : Should be one of the following:
- "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC
- "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC
- "allwinner,sun8i-h3-spdif": for the Allwinner H3 SoC
+ - "allwinner,sun50i-h6-spdif", "allwinner,sun8i-h3-spdif": for H6 SoC
- reg : Offset and length of the register set for the device.
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-04-11 21:45 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-11 21:44 [PATCH 0/4] Allwinner H6 SPDIF support Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` Clément Péron [this message]
2019-04-11 21:44 ` [PATCH 1/4] dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-15 8:04 ` Maxime Ripard
2019-04-15 8:04 ` Maxime Ripard
2019-04-15 8:04 ` Maxime Ripard
2019-04-15 8:09 ` Clément Péron
2019-04-15 8:09 ` Clément Péron
2019-04-15 8:09 ` Clément Péron
2019-04-15 8:11 ` Clément Péron
2019-04-15 8:11 ` Clément Péron
2019-04-15 8:18 ` Maxime Ripard
2019-04-15 8:18 ` Maxime Ripard
2019-04-15 8:18 ` Maxime Ripard
2019-04-15 8:30 ` Clément Péron
2019-04-15 8:30 ` Clément Péron
2019-04-15 8:30 ` Clément Péron
2019-04-15 14:51 ` Maxime Ripard
2019-04-15 14:51 ` Maxime Ripard
2019-04-15 14:51 ` Maxime Ripard
2019-04-15 16:30 ` Clément Péron
2019-04-15 16:30 ` Clément Péron
2019-04-16 7:34 ` Maxime Ripard
2019-04-16 7:34 ` Maxime Ripard
2019-04-16 8:30 ` Clément Péron
2019-04-16 8:30 ` Clément Péron
2019-04-15 15:06 ` Ondřej Jirman
2019-04-15 15:06 ` Ondřej Jirman
2019-04-15 15:06 ` 'Ondřej Jirman' via linux-sunxi
2019-04-11 21:44 ` [PATCH 2/4] arm64: dts: allwinner: Add SPDIF node for Allwinner H6 Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` [PATCH 3/4] arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1 Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` [PATCH 4/4] arm64: defconfig: Enable Sun4i SPDIF module Clément Péron
2019-04-11 21:44 ` Clément Péron
2019-04-11 21:44 ` Clément Péron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190411214422.2267-2-peron.clem@gmail.com \
--to=peron.clem@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@siol.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.