All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Li Jun <jun.li@nxp.com>,
	Badhri Jagan Sridharan <badhri@google.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Min Guo <min.guo@mediatek.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Biju Das <biju.das@bp.renesas.com>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: Re: [PATCH v5 4/6] usb: roles: add API to get usb_role_switch by node
Date: Mon, 20 May 2019 11:03:59 +0300	[thread overview]
Message-ID: <20190520080359.GC1887@kuha.fi.intel.com> (raw)
In-Reply-To: <1558319951.10179.352.camel@mhfsdcap03>

On Mon, May 20, 2019 at 10:39:11AM +0800, Chunfeng Yun wrote:
> Hi,
> On Fri, 2019-05-17 at 16:05 +0300, Heikki Krogerus wrote:
> > Hi,
> > 
> > On Fri, May 17, 2019 at 01:37:36PM +0300, Heikki Krogerus wrote:
> > > On Tue, May 14, 2019 at 04:47:21PM +0800, Chunfeng Yun wrote:
> > > > Add fwnode_usb_role_switch_get() to make easier to get
> > > > usb_role_switch by fwnode which register it.
> > > > It's useful when there is not device_connection registered
> > > > between two drivers and only knows the fwnode which register
> > > > usb_role_switch.
> > > > 
> > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > > > Tested-by: Biju Das <biju.das@bp.renesas.com>
> > > 
> > > Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > 
> > Hold on. I just noticed Rob's comment on patch 2/6, where he points out
> > that you don't need to use device graph since the controller is the
> > parent of the connector. Doesn't that mean you don't really need this
> > API?
> No, I still need it. 
> The change is about the way how to get fwnode;
> when use device graph, get fwnode by of_graph_get_remote_node();
> but now will get fwnode by of_get_parent();

OK, I get that, but I'm still not convinced about if something like
this function is needed at all. I also have concerns regarding how you
are using the function. I'll explain in comment to the patch 5/6 in
this series...

> > > > ---
> > > > v5 changes:
> > > >  1. remove linux/of.h suggested by Biju
> > > >  2. add tested by Biju
> > > > 
> > > > Note: still depends on [1]
> > > >  [1]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
> > > >       https://patchwork.kernel.org/patch/10909971/
> > > > 
> > > > v4 changes:
> > > >   1. use switch_fwnode_match() to find fwnode suggested by Heikki
> > > >   2. this patch now depends on [1]
> > > > 
> > > >  [1] [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
> > > >     https://patchwork.kernel.org/patch/10909971/
> > > > 
> > > > v3 changes:
> > > >   1. use fwnodes instead of node suggested by Andy
> > > >   2. rebuild the API suggested by Heikki
> > > > 
> > > > v2 no changes
> > > > ---
> > > >  drivers/usb/roles/class.c | 24 ++++++++++++++++++++++++
> > > >  include/linux/usb/role.h  |  8 ++++++++
> > > >  2 files changed, 32 insertions(+)
> > > > 
> > > > diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
> > > > index f45d8df5cfb8..4a1f09a41ec0 100644
> > > > --- a/drivers/usb/roles/class.c
> > > > +++ b/drivers/usb/roles/class.c
> > > > @@ -135,6 +135,30 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev)
> > > >  }
> > > >  EXPORT_SYMBOL_GPL(usb_role_switch_get);
> > > >  
> > > > +/**
> > > > + * fwnode_usb_role_switch_get - Find USB role switch by it's parent fwnode
> > > > + * @fwnode: The fwnode that register USB role switch
> > > > + *
> > > > + * Finds and returns role switch registered by @fwnode. The reference count
> > > > + * for the found switch is incremented.
> > > > + */
> > > > +struct usb_role_switch *
> > > > +fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
> > > > +{
> > > > +	struct usb_role_switch *sw;
> > > > +	struct device *dev;
> > > > +
> > > > +	dev = class_find_device(role_class, NULL, fwnode, switch_fwnode_match);
> > > > +	if (!dev)
> > > > +		return ERR_PTR(-EPROBE_DEFER);
> > > > +
> > > > +	sw = to_role_switch(dev);
> > > > +	WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
> > > > +
> > > > +	return sw;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get);
> > 
> > This function only basically converts the fwnode to usb_role_switch,
> > but I would actually prefer that we walked through the device graph
> > here instead of expecting the caller to do that.
> > 
> > So this function should probable be called fwnode_to_usb_role_switch()
> > and not fwnode_usb_role_switch_get(), but I guess you don't need it
> > at all, right?
> > 
> > 
> > thanks,
> > 
> 

-- 
heikki

WARNING: multiple messages have this Message-ID (diff)
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	devicetree@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Biju Das <biju.das@bp.renesas.com>,
	Badhri Jagan Sridharan <badhri@google.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	linux-mediatek@lists.infradead.org,
	Min Guo <min.guo@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	linux-arm-kernel@lists.infradead.org, Li Jun <jun.li@nxp.com>
Subject: Re: [PATCH v5 4/6] usb: roles: add API to get usb_role_switch by node
Date: Mon, 20 May 2019 11:03:59 +0300	[thread overview]
Message-ID: <20190520080359.GC1887@kuha.fi.intel.com> (raw)
In-Reply-To: <1558319951.10179.352.camel@mhfsdcap03>

On Mon, May 20, 2019 at 10:39:11AM +0800, Chunfeng Yun wrote:
> Hi,
> On Fri, 2019-05-17 at 16:05 +0300, Heikki Krogerus wrote:
> > Hi,
> > 
> > On Fri, May 17, 2019 at 01:37:36PM +0300, Heikki Krogerus wrote:
> > > On Tue, May 14, 2019 at 04:47:21PM +0800, Chunfeng Yun wrote:
> > > > Add fwnode_usb_role_switch_get() to make easier to get
> > > > usb_role_switch by fwnode which register it.
> > > > It's useful when there is not device_connection registered
> > > > between two drivers and only knows the fwnode which register
> > > > usb_role_switch.
> > > > 
> > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> > > > Tested-by: Biju Das <biju.das@bp.renesas.com>
> > > 
> > > Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> > 
> > Hold on. I just noticed Rob's comment on patch 2/6, where he points out
> > that you don't need to use device graph since the controller is the
> > parent of the connector. Doesn't that mean you don't really need this
> > API?
> No, I still need it. 
> The change is about the way how to get fwnode;
> when use device graph, get fwnode by of_graph_get_remote_node();
> but now will get fwnode by of_get_parent();

OK, I get that, but I'm still not convinced about if something like
this function is needed at all. I also have concerns regarding how you
are using the function. I'll explain in comment to the patch 5/6 in
this series...

> > > > ---
> > > > v5 changes:
> > > >  1. remove linux/of.h suggested by Biju
> > > >  2. add tested by Biju
> > > > 
> > > > Note: still depends on [1]
> > > >  [1]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
> > > >       https://patchwork.kernel.org/patch/10909971/
> > > > 
> > > > v4 changes:
> > > >   1. use switch_fwnode_match() to find fwnode suggested by Heikki
> > > >   2. this patch now depends on [1]
> > > > 
> > > >  [1] [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
> > > >     https://patchwork.kernel.org/patch/10909971/
> > > > 
> > > > v3 changes:
> > > >   1. use fwnodes instead of node suggested by Andy
> > > >   2. rebuild the API suggested by Heikki
> > > > 
> > > > v2 no changes
> > > > ---
> > > >  drivers/usb/roles/class.c | 24 ++++++++++++++++++++++++
> > > >  include/linux/usb/role.h  |  8 ++++++++
> > > >  2 files changed, 32 insertions(+)
> > > > 
> > > > diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
> > > > index f45d8df5cfb8..4a1f09a41ec0 100644
> > > > --- a/drivers/usb/roles/class.c
> > > > +++ b/drivers/usb/roles/class.c
> > > > @@ -135,6 +135,30 @@ struct usb_role_switch *usb_role_switch_get(struct device *dev)
> > > >  }
> > > >  EXPORT_SYMBOL_GPL(usb_role_switch_get);
> > > >  
> > > > +/**
> > > > + * fwnode_usb_role_switch_get - Find USB role switch by it's parent fwnode
> > > > + * @fwnode: The fwnode that register USB role switch
> > > > + *
> > > > + * Finds and returns role switch registered by @fwnode. The reference count
> > > > + * for the found switch is incremented.
> > > > + */
> > > > +struct usb_role_switch *
> > > > +fwnode_usb_role_switch_get(struct fwnode_handle *fwnode)
> > > > +{
> > > > +	struct usb_role_switch *sw;
> > > > +	struct device *dev;
> > > > +
> > > > +	dev = class_find_device(role_class, NULL, fwnode, switch_fwnode_match);
> > > > +	if (!dev)
> > > > +		return ERR_PTR(-EPROBE_DEFER);
> > > > +
> > > > +	sw = to_role_switch(dev);
> > > > +	WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
> > > > +
> > > > +	return sw;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(fwnode_usb_role_switch_get);
> > 
> > This function only basically converts the fwnode to usb_role_switch,
> > but I would actually prefer that we walked through the device graph
> > here instead of expecting the caller to do that.
> > 
> > So this function should probable be called fwnode_to_usb_role_switch()
> > and not fwnode_usb_role_switch_get(), but I guess you don't need it
> > at all, right?
> > 
> > 
> > thanks,
> > 
> 

-- 
heikki

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-05-20  8:04 UTC|newest]

Thread overview: 103+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-14  8:47 [v5 PATCH 0/6] add USB Type-B GPIO connector driver Chunfeng Yun
2019-05-14  8:47 ` Chunfeng Yun
2019-05-14  8:47 ` Chunfeng Yun
2019-05-14  8:47 ` [PATCH v5 1/6] dt-bindings: connector: add optional properties for Type-B Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47 ` [PATCH v5 2/6] dt-bindings: usb: add binding for Type-B GPIO connector driver Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14 18:12   ` Rob Herring
2019-05-14 18:12     ` Rob Herring
2019-05-15  9:36     ` Chunfeng Yun
2019-05-15  9:36       ` Chunfeng Yun
2019-05-15  9:36       ` Chunfeng Yun
2019-05-14  8:47 ` [PATCH v5 3/6] dt-bindings: usb: mtu3: add properties about USB Role Switch Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14 18:17   ` Rob Herring
2019-05-14 18:17     ` Rob Herring
2019-05-14 18:17     ` Rob Herring
2019-05-14  8:47 ` [PATCH v5 4/6] usb: roles: add API to get usb_role_switch by node Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-17 10:37   ` Heikki Krogerus
2019-05-17 10:37     ` Heikki Krogerus
2019-05-17 13:05     ` Heikki Krogerus
2019-05-17 13:05       ` Heikki Krogerus
2019-05-20  2:39       ` Chunfeng Yun
2019-05-20  2:39         ` Chunfeng Yun
2019-05-20  2:39         ` Chunfeng Yun
2019-05-20  8:03         ` Heikki Krogerus [this message]
2019-05-20  8:03           ` Heikki Krogerus
2019-05-20  8:06           ` Biju Das
2019-05-20  8:06             ` Biju Das
2019-05-20  8:06             ` Biju Das
2019-05-20  8:36             ` Heikki Krogerus
2019-05-20  8:36               ` Heikki Krogerus
2019-05-20  8:36               ` Heikki Krogerus
2019-05-20  9:45               ` Biju Das
2019-05-20  9:45                 ` Biju Das
2019-05-20  9:45                 ` Biju Das
2019-05-21  7:35                 ` Chunfeng Yun
2019-05-21  7:35                   ` Chunfeng Yun
2019-05-21  7:35                   ` Chunfeng Yun
2019-05-21 10:33                   ` Heikki Krogerus
2019-05-21 10:33                     ` Heikki Krogerus
2019-05-21 10:33                     ` Heikki Krogerus
2019-05-22  3:37                     ` Chunfeng Yun
2019-05-22  3:37                       ` Chunfeng Yun
2019-05-22  3:37                       ` Chunfeng Yun
2019-05-21  9:58                 ` Heikki Krogerus
2019-05-21  9:58                   ` Heikki Krogerus
2019-05-21  9:58                   ` Heikki Krogerus
2019-05-22  8:05                   ` Biju Das
2019-05-22  8:05                     ` Biju Das
2019-05-22  8:05                     ` Biju Das
2019-05-22  9:30                     ` Chunfeng Yun
2019-05-22  9:30                       ` Chunfeng Yun
2019-05-22  9:30                       ` Chunfeng Yun
2019-05-22 10:55                       ` Biju Das
2019-05-22 10:55                         ` Biju Das
2019-05-22 10:55                         ` Biju Das
2019-05-22 14:26                         ` Heikki Krogerus
2019-05-22 14:26                           ` Heikki Krogerus
2019-05-22 14:26                           ` Heikki Krogerus
2019-05-22 14:57                           ` Biju Das
2019-05-22 14:57                             ` Biju Das
2019-05-22 14:57                             ` Biju Das
2019-05-24 12:44                             ` Heikki Krogerus
2019-05-24 12:44                               ` Heikki Krogerus
2019-05-24 12:44                               ` Heikki Krogerus
2019-05-27  3:08                               ` Chunfeng Yun
2019-05-27  3:08                                 ` Chunfeng Yun
2019-05-27  3:08                                 ` Chunfeng Yun
2019-05-28  6:52                                 ` Biju Das
2019-05-28  6:52                                   ` Biju Das
2019-05-28  6:52                                   ` Biju Das
2019-05-28  9:23                                   ` Chunfeng Yun
2019-05-28  9:23                                     ` Chunfeng Yun
2019-05-28  9:23                                     ` Chunfeng Yun
2019-05-23 10:16                           ` Chunfeng Yun
2019-05-23 10:16                             ` Chunfeng Yun
2019-05-23 10:16                             ` Chunfeng Yun
2019-05-24 11:40                             ` Heikki Krogerus
2019-05-24 11:40                               ` Heikki Krogerus
2019-05-24 11:40                               ` Heikki Krogerus
2019-05-27  3:07                               ` Chunfeng Yun
2019-05-27  3:07                                 ` Chunfeng Yun
2019-05-27  3:07                                 ` Chunfeng Yun
2019-05-27 10:45                                 ` Heikki Krogerus
2019-05-27 10:45                                   ` Heikki Krogerus
2019-05-27 10:45                                   ` Heikki Krogerus
2019-05-14  8:47 ` [PATCH v5 5/6] usb: roles: add USB Type-B GPIO connector driver Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-20  8:31   ` Heikki Krogerus
2019-05-20  8:31     ` Heikki Krogerus
2019-05-21  7:44     ` Chunfeng Yun
2019-05-21  7:44       ` Chunfeng Yun
2019-05-21  7:44       ` Chunfeng Yun
2019-05-14  8:47 ` [PATCH v5 6/6] usb: mtu3: register a USB Role Switch for dual role mode Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun
2019-05-14  8:47   ` Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190520080359.GC1887@kuha.fi.intel.com \
    --to=heikki.krogerus@linux.intel.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=badhri@google.com \
    --cc=biju.das@bp.renesas.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=jun.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=min.guo@mediatek.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.