[PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Julien Thierry]

Hi,

Version one[1] of this series attempted to fix the issue reported by
Zenghui[2] when using the function_graph tracer with IRQ priority
masking.

Since then, I realized that priority masking and the use of Pseudo-NMIs
was more broken than I thought.

* Patch 1-2 are just some cleanup
* Patch 3 fixes a potential issue with not clobbering condition flags
  in irqflags operations
* Patch 4 fixes an issue where calling C code in Pseudo-NMI before
  entering NMI enter could lead to potential races
* Patch 5 fixes the function_graph issue when using priority masking
* Patch 6 introduces some debug to hopefully avoid breaking things in
  the future
* Patch 7 is a rebased version of the patch sent by Wei Li[3] fixing
  an error that can happen during on some platform using the priority
  masking feature
* Patch 8 re-enables the Pseudo-NMI selection

Changes since V3 [4]:
- Rebase on v5.2-rc4
- Fix comments/typos/missed updates
- Use single condition evalution for nmi_enter and nmi_exit

Changes since V2 [5]:
- Rebase on v5.2-rc3
- clobber conditions flags for asm that needs it as pointed out by Marc Z.
  and Robin M.
- Fix the naming of the new PMR bit value
- Introduce some helper for the debug conditions
- use WARN_ONCE for debug that might be very noisy
- Reenable pseudo NMI.

Changes since V1 [1]:
- Fix possible race condition between NMI and trace irqflags
- Simplify the representation of PSR.I in the PMR value
- Include Wei Li's fix
- Rebase on v5.1-rc7

[1] https://marc.info/?l=linux-arm-kernel&m=155542458004480&w=2
[2] https://www.spinics.net/lists/arm-kernel/msg716956.html
[3] https://www.spinics.net/lists/arm-kernel/msg722171.html
[4] https://lkml.org/lkml/2019/6/6/280
[5] https://lkml.org/lkml/2019/4/29/643

Cheers,

Julien

-->

Julien Thierry (7):
  arm64: Do not enable IRQs for ct_user_exit
  arm64: irqflags: Pass flags as readonly operand to restore instruction
  arm64: irqflags: Add condition flags to inline asm clobber list
  arm64: Fix interrupt tracing in the presence of NMIs
  arm64: Fix incorrect irqflag restore for priority masking
  arm64: irqflags: Introduce explicit debugging for IRQ priorities
  arm64: Allow selecting Pseudo-NMI again

Wei Li (1):
  arm64: fix kernel stack overflow in kdump capture kernel

 arch/arm64/Kconfig                  | 12 +++++-
 arch/arm64/include/asm/arch_gicv3.h |  4 +-
 arch/arm64/include/asm/cpufeature.h |  6 +++
 arch/arm64/include/asm/daifflags.h  | 75 +++++++++++++++++++++------------
 arch/arm64/include/asm/irqflags.h   | 79 +++++++++++++++++-----------------
 arch/arm64/include/asm/kvm_host.h   |  7 ++--
 arch/arm64/include/asm/ptrace.h     | 10 ++++-
 arch/arm64/kernel/entry.S           | 84 +++++++++++++++++++++++++++++--------
 arch/arm64/kernel/irq.c             | 26 ++++++++++++
 arch/arm64/kernel/process.c         |  2 +-
 arch/arm64/kernel/smp.c             |  6 +--
 arch/arm64/kvm/hyp/switch.c         |  2 +-
 drivers/irqchip/irq-gic-v3.c        |  7 ++++
 kernel/irq/irqdesc.c                |  8 +++-
 14 files changed, 228 insertions(+), 100 deletions(-)

--
1.9.1

[PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Julien Thierry]

Hi,

Version one[1] of this series attempted to fix the issue reported by
Zenghui[2] when using the function_graph tracer with IRQ priority
masking.

Since then, I realized that priority masking and the use of Pseudo-NMIs
was more broken than I thought.

* Patch 1-2 are just some cleanup
* Patch 3 fixes a potential issue with not clobbering condition flags
  in irqflags operations
* Patch 4 fixes an issue where calling C code in Pseudo-NMI before
  entering NMI enter could lead to potential races
* Patch 5 fixes the function_graph issue when using priority masking
* Patch 6 introduces some debug to hopefully avoid breaking things in
  the future
* Patch 7 is a rebased version of the patch sent by Wei Li[3] fixing
  an error that can happen during on some platform using the priority
  masking feature
* Patch 8 re-enables the Pseudo-NMI selection

Changes since V3 [4]:
- Rebase on v5.2-rc4
- Fix comments/typos/missed updates
- Use single condition evalution for nmi_enter and nmi_exit

Changes since V2 [5]:
- Rebase on v5.2-rc3
- clobber conditions flags for asm that needs it as pointed out by Marc Z.
  and Robin M.
- Fix the naming of the new PMR bit value
- Introduce some helper for the debug conditions
- use WARN_ONCE for debug that might be very noisy
- Reenable pseudo NMI.

Changes since V1 [1]:
- Fix possible race condition between NMI and trace irqflags
- Simplify the representation of PSR.I in the PMR value
- Include Wei Li's fix
- Rebase on v5.1-rc7

[1] https://marc.info/?l=linux-arm-kernel&m=155542458004480&w=2
[2] https://www.spinics.net/lists/arm-kernel/msg716956.html
[3] https://www.spinics.net/lists/arm-kernel/msg722171.html
[4] https://lkml.org/lkml/2019/6/6/280
[5] https://lkml.org/lkml/2019/4/29/643

Cheers,

Julien

-->

Julien Thierry (7):
  arm64: Do not enable IRQs for ct_user_exit
  arm64: irqflags: Pass flags as readonly operand to restore instruction
  arm64: irqflags: Add condition flags to inline asm clobber list
  arm64: Fix interrupt tracing in the presence of NMIs
  arm64: Fix incorrect irqflag restore for priority masking
  arm64: irqflags: Introduce explicit debugging for IRQ priorities
  arm64: Allow selecting Pseudo-NMI again

Wei Li (1):
  arm64: fix kernel stack overflow in kdump capture kernel

 arch/arm64/Kconfig                  | 12 +++++-
 arch/arm64/include/asm/arch_gicv3.h |  4 +-
 arch/arm64/include/asm/cpufeature.h |  6 +++
 arch/arm64/include/asm/daifflags.h  | 75 +++++++++++++++++++++------------
 arch/arm64/include/asm/irqflags.h   | 79 +++++++++++++++++-----------------
 arch/arm64/include/asm/kvm_host.h   |  7 ++--
 arch/arm64/include/asm/ptrace.h     | 10 ++++-
 arch/arm64/kernel/entry.S           | 84 +++++++++++++++++++++++++++++--------
 arch/arm64/kernel/irq.c             | 26 ++++++++++++
 arch/arm64/kernel/process.c         |  2 +-
 arch/arm64/kernel/smp.c             |  6 +--
 arch/arm64/kvm/hyp/switch.c         |  2 +-
 drivers/irqchip/irq-gic-v3.c        |  7 ++++
 kernel/irq/irqdesc.c                |  8 +++-
 14 files changed, 228 insertions(+), 100 deletions(-)

--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/8] arm64: Do not enable IRQs for ct_user_exit

[Julien Thierry]

For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.

When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.

What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking

Do not clear PSR.I in those two locations.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc:Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/kernel/entry.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index cd0c7af..89ab6bd 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -870,7 +870,7 @@ el0_dbg:
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_debug_exception
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 el0_inv:
@@ -922,7 +922,7 @@ el0_error_naked:
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 ENDPROC(el0_error)
--
1.9.1

[PATCH v4 1/8] arm64: Do not enable IRQs for ct_user_exit

[Julien Thierry]

For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.

When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.

What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking

Do not clear PSR.I in those two locations.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc:Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
---
 arch/arm64/kernel/entry.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index cd0c7af..89ab6bd 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -870,7 +870,7 @@ el0_dbg:
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_debug_exception
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 el0_inv:
@@ -922,7 +922,7 @@ el0_error_naked:
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 ENDPROC(el0_error)
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 2/8] arm64: irqflags: Pass flags as readonly operand to restore instruction

[Julien Thierry]

Flags are only read by the instructions doing the irqflags restore
operation. Pass the operand as read only to the asm inline instead of
read-write.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/irqflags.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 62996318..9c93152 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -119,8 +119,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
 			__msr_s(SYS_ICC_PMR_EL1, "%0")
 			"dsb	sy",
 			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "+r" (flags)
 		:
+		: "r" (flags)
 		: "memory");
 }

--
1.9.1

[PATCH v4 2/8] arm64: irqflags: Pass flags as readonly operand to restore instruction

[Julien Thierry]

Flags are only read by the instructions doing the irqflags restore
operation. Pass the operand as read only to the asm inline instead of
read-write.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/irqflags.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 62996318..9c93152 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -119,8 +119,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
 			__msr_s(SYS_ICC_PMR_EL1, "%0")
 			"dsb	sy",
 			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "+r" (flags)
 		:
+		: "r" (flags)
 		: "memory");
 }

--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 3/8] arm64: irqflags: Add condition flags to inline asm clobber list

[Julien Thierry]

Some of the inline assembly instruction use the condition flags and need
to include "cc" in the clobber list.

Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/irqflags.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 9c93152..fbe1aba 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -92,7 +92,7 @@ static inline unsigned long arch_local_save_flags(void)
 			ARM64_HAS_IRQ_PRIO_MASKING)
 		: "=&r" (flags), "+r" (daif_bits)
 		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
-		: "memory");
+		: "cc", "memory");

 	return flags;
 }
@@ -136,7 +136,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 			ARM64_HAS_IRQ_PRIO_MASKING)
 		: "=&r" (res)
 		: "r" ((int) flags)
-		: "memory");
+		: "cc", "memory");

 	return res;
 }
--
1.9.1

[PATCH v4 3/8] arm64: irqflags: Add condition flags to inline asm clobber list

[Julien Thierry]

Some of the inline assembly instruction use the condition flags and need
to include "cc" in the clobber list.

Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/include/asm/irqflags.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index 9c93152..fbe1aba 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -92,7 +92,7 @@ static inline unsigned long arch_local_save_flags(void)
 			ARM64_HAS_IRQ_PRIO_MASKING)
 		: "=&r" (flags), "+r" (daif_bits)
 		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
-		: "memory");
+		: "cc", "memory");

 	return flags;
 }
@@ -136,7 +136,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 			ARM64_HAS_IRQ_PRIO_MASKING)
 		: "=&r" (res)
 		: "r" ((int) flags)
-		: "memory");
+		: "cc", "memory");

 	return res;
 }
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 4/8] arm64: Fix interrupt tracing in the presence of NMIs

[Julien Thierry]

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb ("arm64: Enable the support of pseudo-NMIs")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
---
 arch/arm64/kernel/entry.S    | 44 +++++++++++++++++++++++++++++++++-----------
 arch/arm64/kernel/irq.c      | 17 +++++++++++++++++
 drivers/irqchip/irq-gic-v3.c |  7 +++++++
 kernel/irq/irqdesc.c         |  8 ++++++--
 4 files changed, 63 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 89ab6bd..6d59663 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -435,6 +435,20 @@ tsk	.req	x28		// current thread_info
 	irq_stack_exit
 	.endm

+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	/*
+	 * Set res to 0 if irqs were unmasked in interrupted context.
+	 * Otherwise set res to non-0 value.
+	 */
+	.macro	test_irqs_unmasked res:req, pmr:req
+alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	sub	\res, \pmr, #GIC_PRIO_IRQON
+alternative_else
+	mov	\res, xzr
+alternative_endif
+	.endm
+#endif
+
 	.text

 /*
@@ -631,19 +645,19 @@ ENDPROC(el1_sync)
 el1_irq:
 	kernel_entry 1
 	enable_da_f
-#ifdef CONFIG_TRACE_IRQFLAGS
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	ldr	x20, [sp, #S_PMR_SAVE]
-alternative_else
-	mov	x20, #GIC_PRIO_IRQON
-alternative_endif
-	cmp	x20, #GIC_PRIO_IRQOFF
-	/* Irqs were disabled, don't trace */
-	b.ls	1f
+alternative_else_nop_endif
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbz	x0, 1f
+	bl	asm_nmi_enter
+1:
 #endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
-1:
 #endif

 	irq_handler
@@ -662,14 +676,22 @@ alternative_else_nop_endif
 	bl	preempt_schedule_irq		// irq en/disable is done inside
 1:
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 	/*
 	 * if IRQs were disabled when we received the interrupt, we have an NMI
 	 * and we are not re-enabling interrupt upon eret. Skip tracing.
 	 */
-	cmp	x20, #GIC_PRIO_IRQOFF
-	b.ls	1f
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbz	x0, 1f
+	bl	asm_nmi_exit
+1:
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbnz	x0, 1f
 #endif
 	bl	trace_hardirqs_on
 1:
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 92fa817..fdd9cb2 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -27,8 +27,10 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
+#include <linux/kprobes.h>
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
+#include <asm/daifflags.h>
 #include <asm/vmap_stack.h>

 unsigned long irq_err_count;
@@ -76,3 +78,18 @@ void __init init_IRQ(void)
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
 }
+
+/*
+ * Stubs to make nmi_enter/exit() code callable from ASM
+ */
+asmlinkage void notrace asm_nmi_enter(void)
+{
+	nmi_enter();
+}
+NOKPROBE_SYMBOL(asm_nmi_enter);
+
+asmlinkage void notrace asm_nmi_exit(void)
+{
+	nmi_exit();
+}
+NOKPROBE_SYMBOL(asm_nmi_exit);
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index f44cd89..b176700 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -472,8 +472,12 @@ static void gic_deactivate_unhandled(u32 irqnr)

 static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
 {
+	bool irqs_enabled = interrupts_enabled(regs);
 	int err;

+	if (irqs_enabled)
+		nmi_enter();
+
 	if (static_branch_likely(&supports_deactivate_key))
 		gic_write_eoir(irqnr);
 	/*
@@ -485,6 +489,9 @@ static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
 	err = handle_domain_nmi(gic_data.domain, irqnr, regs);
 	if (err)
 		gic_deactivate_unhandled(irqnr);
+
+	if (irqs_enabled)
+		nmi_exit();
 }

 static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index c52b737..a92b335 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -680,6 +680,8 @@ int __handle_domain_irq(struct irq_domain *domain, unsigned int hwirq,
  * @hwirq:	The HW irq number to convert to a logical one
  * @regs:	Register file coming from the low-level handling code
  *
+ *		This function must be called from an NMI context.
+ *
  * Returns:	0 on success, or -EINVAL if conversion has failed
  */
 int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
@@ -689,7 +691,10 @@ int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
 	unsigned int irq;
 	int ret = 0;

-	nmi_enter();
+	/*
+	 * NMI context needs to be setup earlier in order to deal with tracing.
+	 */
+	WARN_ON(!in_nmi());

 	irq = irq_find_mapping(domain, hwirq);

@@ -702,7 +707,6 @@ int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
 	else
 		ret = -EINVAL;

-	nmi_exit();
 	set_irq_regs(old_regs);
 	return ret;
 }
--
1.9.1

[PATCH v4 4/8] arm64: Fix interrupt tracing in the presence of NMIs

[Julien Thierry]

In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.

Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.

On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).

When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.

Fixes: bc3c03ccb ("arm64: Enable the support of pseudo-NMIs")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
---
 arch/arm64/kernel/entry.S    | 44 +++++++++++++++++++++++++++++++++-----------
 arch/arm64/kernel/irq.c      | 17 +++++++++++++++++
 drivers/irqchip/irq-gic-v3.c |  7 +++++++
 kernel/irq/irqdesc.c         |  8 ++++++--
 4 files changed, 63 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 89ab6bd..6d59663 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -435,6 +435,20 @@ tsk	.req	x28		// current thread_info
 	irq_stack_exit
 	.endm

+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	/*
+	 * Set res to 0 if irqs were unmasked in interrupted context.
+	 * Otherwise set res to non-0 value.
+	 */
+	.macro	test_irqs_unmasked res:req, pmr:req
+alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	sub	\res, \pmr, #GIC_PRIO_IRQON
+alternative_else
+	mov	\res, xzr
+alternative_endif
+	.endm
+#endif
+
 	.text

 /*
@@ -631,19 +645,19 @@ ENDPROC(el1_sync)
 el1_irq:
 	kernel_entry 1
 	enable_da_f
-#ifdef CONFIG_TRACE_IRQFLAGS
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	ldr	x20, [sp, #S_PMR_SAVE]
-alternative_else
-	mov	x20, #GIC_PRIO_IRQON
-alternative_endif
-	cmp	x20, #GIC_PRIO_IRQOFF
-	/* Irqs were disabled, don't trace */
-	b.ls	1f
+alternative_else_nop_endif
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbz	x0, 1f
+	bl	asm_nmi_enter
+1:
 #endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
-1:
 #endif

 	irq_handler
@@ -662,14 +676,22 @@ alternative_else_nop_endif
 	bl	preempt_schedule_irq		// irq en/disable is done inside
 1:
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
+
 #ifdef CONFIG_ARM64_PSEUDO_NMI
 	/*
 	 * if IRQs were disabled when we received the interrupt, we have an NMI
 	 * and we are not re-enabling interrupt upon eret. Skip tracing.
 	 */
-	cmp	x20, #GIC_PRIO_IRQOFF
-	b.ls	1f
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbz	x0, 1f
+	bl	asm_nmi_exit
+1:
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	test_irqs_unmasked	res=x0, pmr=x20
+	cbnz	x0, 1f
 #endif
 	bl	trace_hardirqs_on
 1:
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 92fa817..fdd9cb2 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -27,8 +27,10 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
+#include <linux/kprobes.h>
 #include <linux/seq_file.h>
 #include <linux/vmalloc.h>
+#include <asm/daifflags.h>
 #include <asm/vmap_stack.h>

 unsigned long irq_err_count;
@@ -76,3 +78,18 @@ void __init init_IRQ(void)
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
 }
+
+/*
+ * Stubs to make nmi_enter/exit() code callable from ASM
+ */
+asmlinkage void notrace asm_nmi_enter(void)
+{
+	nmi_enter();
+}
+NOKPROBE_SYMBOL(asm_nmi_enter);
+
+asmlinkage void notrace asm_nmi_exit(void)
+{
+	nmi_exit();
+}
+NOKPROBE_SYMBOL(asm_nmi_exit);
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index f44cd89..b176700 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -472,8 +472,12 @@ static void gic_deactivate_unhandled(u32 irqnr)

 static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
 {
+	bool irqs_enabled = interrupts_enabled(regs);
 	int err;

+	if (irqs_enabled)
+		nmi_enter();
+
 	if (static_branch_likely(&supports_deactivate_key))
 		gic_write_eoir(irqnr);
 	/*
@@ -485,6 +489,9 @@ static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
 	err = handle_domain_nmi(gic_data.domain, irqnr, regs);
 	if (err)
 		gic_deactivate_unhandled(irqnr);
+
+	if (irqs_enabled)
+		nmi_exit();
 }

 static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index c52b737..a92b335 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -680,6 +680,8 @@ int __handle_domain_irq(struct irq_domain *domain, unsigned int hwirq,
  * @hwirq:	The HW irq number to convert to a logical one
  * @regs:	Register file coming from the low-level handling code
  *
+ *		This function must be called from an NMI context.
+ *
  * Returns:	0 on success, or -EINVAL if conversion has failed
  */
 int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
@@ -689,7 +691,10 @@ int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
 	unsigned int irq;
 	int ret = 0;

-	nmi_enter();
+	/*
+	 * NMI context needs to be setup earlier in order to deal with tracing.
+	 */
+	WARN_ON(!in_nmi());

 	irq = irq_find_mapping(domain, hwirq);

@@ -702,7 +707,6 @@ int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
 	else
 		ret = -EINVAL;

-	nmi_exit();
 	set_irq_regs(old_regs);
 	return ret;
 }
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 5/8] arm64: Fix incorrect irqflag restore for priority masking

[Julien Thierry]

When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
---
 arch/arm64/include/asm/arch_gicv3.h |  4 ++-
 arch/arm64/include/asm/daifflags.h  | 68 ++++++++++++++++++++++---------------
 arch/arm64/include/asm/irqflags.h   | 67 +++++++++++++++---------------------
 arch/arm64/include/asm/kvm_host.h   |  7 ++--
 arch/arm64/include/asm/ptrace.h     | 10 ++++--
 arch/arm64/kernel/entry.S           | 38 ++++++++++++++++++---
 arch/arm64/kernel/process.c         |  2 +-
 arch/arm64/kernel/smp.c             |  8 +++--
 arch/arm64/kvm/hyp/switch.c         |  2 +-
 9 files changed, 123 insertions(+), 83 deletions(-)

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 14b41dd..9e991b6 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -163,7 +163,9 @@ static inline bool gic_prio_masking_enabled(void)

 static inline void gic_pmr_mask_irqs(void)
 {
-	BUILD_BUG_ON(GICD_INT_DEF_PRI <= GIC_PRIO_IRQOFF);
+	BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF |
+					 GIC_PRIO_PSR_I_SET));
+	BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
 	gic_write_pmr(GIC_PRIO_IRQOFF);
 }

diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index db452aa..f93204f 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -18,6 +18,7 @@

 #include <linux/irqflags.h>

+#include <asm/arch_gicv3.h>
 #include <asm/cpufeature.h>

 #define DAIF_PROCCTX		0
@@ -32,6 +33,11 @@ static inline void local_daif_mask(void)
 		:
 		:
 		: "memory");
+
+	/* Don't really care for a dsb here, we don't intend to enable IRQs */
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+
 	trace_hardirqs_off();
 }

@@ -43,7 +49,7 @@ static inline unsigned long local_daif_save(void)

 	if (system_uses_irq_prio_masking()) {
 		/* If IRQs are masked with PMR, reflect it in the flags */
-		if (read_sysreg_s(SYS_ICC_PMR_EL1) <= GIC_PRIO_IRQOFF)
+		if (read_sysreg_s(SYS_ICC_PMR_EL1) != GIC_PRIO_IRQON)
 			flags |= PSR_I_BIT;
 	}

@@ -59,36 +65,44 @@ static inline void local_daif_restore(unsigned long flags)
 	if (!irq_disabled) {
 		trace_hardirqs_on();

-		if (system_uses_irq_prio_masking())
-			arch_local_irq_enable();
-	} else if (!(flags & PSR_A_BIT)) {
-		/*
-		 * If interrupts are disabled but we can take
-		 * asynchronous errors, we can take NMIs
-		 */
 		if (system_uses_irq_prio_masking()) {
-			flags &= ~PSR_I_BIT;
+			gic_write_pmr(GIC_PRIO_IRQON);
+			dsb(sy);
+		}
+	} else if (system_uses_irq_prio_masking()) {
+		u64 pmr;
+
+		if (!(flags & PSR_A_BIT)) {
 			/*
-			 * There has been concern that the write to daif
-			 * might be reordered before this write to PMR.
-			 * From the ARM ARM DDI 0487D.a, section D1.7.1
-			 * "Accessing PSTATE fields":
-			 *   Writes to the PSTATE fields have side-effects on
-			 *   various aspects of the PE operation. All of these
-			 *   side-effects are guaranteed:
-			 *     - Not to be visible to earlier instructions in
-			 *       the execution stream.
-			 *     - To be visible to later instructions in the
-			 *       execution stream
-			 *
-			 * Also, writes to PMR are self-synchronizing, so no
-			 * interrupts with a lower priority than PMR is signaled
-			 * to the PE after the write.
-			 *
-			 * So we don't need additional synchronization here.
+			 * If interrupts are disabled but we can take
+			 * asynchronous errors, we can take NMIs
 			 */
-			arch_local_irq_disable();
+			flags &= ~PSR_I_BIT;
+			pmr = GIC_PRIO_IRQOFF;
+		} else {
+			pmr = GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET;
 		}
+
+		/*
+		 * There has been concern that the write to daif
+		 * might be reordered before this write to PMR.
+		 * From the ARM ARM DDI 0487D.a, section D1.7.1
+		 * "Accessing PSTATE fields":
+		 *   Writes to the PSTATE fields have side-effects on
+		 *   various aspects of the PE operation. All of these
+		 *   side-effects are guaranteed:
+		 *     - Not to be visible to earlier instructions in
+		 *       the execution stream.
+		 *     - To be visible to later instructions in the
+		 *       execution stream
+		 *
+		 * Also, writes to PMR are self-synchronizing, so no
+		 * interrupts with a lower priority than PMR is signaled
+		 * to the PE after the write.
+		 *
+		 * So we don't need additional synchronization here.
+		 */
+		gic_write_pmr(pmr);
 	}

 	write_sysreg(flags, daif);
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index fbe1aba..a137272 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -67,43 +67,46 @@ static inline void arch_local_irq_disable(void)
  */
 static inline unsigned long arch_local_save_flags(void)
 {
-	unsigned long daif_bits;
 	unsigned long flags;

-	daif_bits = read_sysreg(daif);
-
-	/*
-	 * The asm is logically equivalent to:
-	 *
-	 * if (system_uses_irq_prio_masking())
-	 *	flags = (daif_bits & PSR_I_BIT) ?
-	 *			GIC_PRIO_IRQOFF :
-	 *			read_sysreg_s(SYS_ICC_PMR_EL1);
-	 * else
-	 *	flags = daif_bits;
-	 */
 	asm volatile(ALTERNATIVE(
-			"mov	%0, %1\n"
-			"nop\n"
-			"nop",
-			__mrs_s("%0", SYS_ICC_PMR_EL1)
-			"ands	%1, %1, " __stringify(PSR_I_BIT) "\n"
-			"csel	%0, %0, %2, eq",
-			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "=&r" (flags), "+r" (daif_bits)
-		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
-		: "cc", "memory");
+		"mrs	%0, daif",
+		__mrs_s("%0", SYS_ICC_PMR_EL1),
+		ARM64_HAS_IRQ_PRIO_MASKING)
+		: "=&r" (flags)
+		:
+		: "memory");

 	return flags;
 }

+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	int res;
+
+	asm volatile(ALTERNATIVE(
+		"and	%w0, %w1, #" __stringify(PSR_I_BIT),
+		"eor	%w0, %w1, #" __stringify(GIC_PRIO_IRQON),
+		ARM64_HAS_IRQ_PRIO_MASKING)
+		: "=&r" (res)
+		: "r" ((int) flags)
+		: "memory");
+
+	return res;
+}
+
 static inline unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;

 	flags = arch_local_save_flags();

-	arch_local_irq_disable();
+	/*
+	 * There are too many states with IRQs disabled, just keep the current
+	 * state if interrupts are already disabled/masked.
+	 */
+	if (!arch_irqs_disabled_flags(flags))
+		arch_local_irq_disable();

 	return flags;
 }
@@ -124,21 +127,5 @@ static inline void arch_local_irq_restore(unsigned long flags)
 		: "memory");
 }

-static inline int arch_irqs_disabled_flags(unsigned long flags)
-{
-	int res;
-
-	asm volatile(ALTERNATIVE(
-			"and	%w0, %w1, #" __stringify(PSR_I_BIT) "\n"
-			"nop",
-			"cmp	%w1, #" __stringify(GIC_PRIO_IRQOFF) "\n"
-			"cset	%w0, ls",
-			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "=&r" (res)
-		: "r" ((int) flags)
-		: "cc", "memory");
-
-	return res;
-}
 #endif
 #endif
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 4bcd9c1..3341063 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -608,11 +608,12 @@ static inline void kvm_arm_vhe_guest_enter(void)
 	 * will not signal the CPU of interrupts of lower priority, and the
 	 * only way to get out will be via guest exceptions.
 	 * Naturally, we want to avoid this.
+	 *
+	 * local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a
+	 * dsb to ensure the redistributor is forwards EL2 IRQs to the CPU.
 	 */
-	if (system_uses_irq_prio_masking()) {
-		gic_write_pmr(GIC_PRIO_IRQON);
+	if (system_uses_irq_prio_masking())
 		dsb(sy);
-	}
 }

 static inline void kvm_arm_vhe_guest_exit(void)
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index b2de329..da22422 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -35,9 +35,15 @@
  * means masking more IRQs (or at least that the same IRQs remain masked).
  *
  * To mask interrupts, we clear the most significant bit of PMR.
+ *
+ * Some code sections either automatically switch back to PSR.I or explicitly
+ * require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included
+ * in the  the priority mask, it indicates that PSR.I should be set and
+ * interrupt disabling temporarily does not rely on IRQ priorities.
  */
-#define GIC_PRIO_IRQON		0xf0
-#define GIC_PRIO_IRQOFF		(GIC_PRIO_IRQON & ~0x80)
+#define GIC_PRIO_IRQON			0xc0
+#define GIC_PRIO_IRQOFF			(GIC_PRIO_IRQON & ~0x80)
+#define GIC_PRIO_PSR_I_SET		(1 << 4)

 /* Additional SPSR bits not exposed in the UABI */
 #define PSR_IL_BIT		(1 << 20)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 6d59663..165da78 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -258,6 +258,7 @@ alternative_else_nop_endif
 	/*
 	 * Registers that may be useful after this macro is invoked:
 	 *
+	 * x20 - ICC_PMR_EL1
 	 * x21 - aborted SP
 	 * x22 - aborted PC
 	 * x23 - aborted PSTATE
@@ -449,6 +450,24 @@ alternative_endif
 	.endm
 #endif

+	.macro	gic_prio_kentry_setup, tmp:req
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	mov	\tmp, #(GIC_PRIO_PSR_I_SET | GIC_PRIO_IRQON)
+	msr_s	SYS_ICC_PMR_EL1, \tmp
+	alternative_else_nop_endif
+#endif
+	.endm
+
+	.macro	gic_prio_irq_setup, pmr:req, tmp:req
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	orr	\tmp, \pmr, #GIC_PRIO_PSR_I_SET
+	msr_s	SYS_ICC_PMR_EL1, \tmp
+	alternative_else_nop_endif
+#endif
+	.endm
+
 	.text

 /*
@@ -627,6 +646,7 @@ el1_dbg:
 	cmp	x24, #ESR_ELx_EC_BRK64		// if BRK64
 	cinc	x24, x24, eq			// set bit '0'
 	tbz	x24, #0, el1_inv		// EL1 only
+	gic_prio_kentry_setup tmp=x3
 	mrs	x0, far_el1
 	mov	x2, sp				// struct pt_regs
 	bl	do_debug_exception
@@ -644,12 +664,10 @@ ENDPROC(el1_sync)
 	.align	6
 el1_irq:
 	kernel_entry 1
+	gic_prio_irq_setup pmr=x20, tmp=x1
 	enable_da_f

 #ifdef CONFIG_ARM64_PSEUDO_NMI
-alternative_if ARM64_HAS_IRQ_PRIO_MASKING
-	ldr	x20, [sp, #S_PMR_SAVE]
-alternative_else_nop_endif
 	test_irqs_unmasked	res=x0, pmr=x20
 	cbz	x0, 1f
 	bl	asm_nmi_enter
@@ -679,8 +697,9 @@ alternative_else_nop_endif

 #ifdef CONFIG_ARM64_PSEUDO_NMI
 	/*
-	 * if IRQs were disabled when we received the interrupt, we have an NMI
-	 * and we are not re-enabling interrupt upon eret. Skip tracing.
+	 * When using IRQ priority masking, we can get spurious interrupts while
+	 * PMR is set to GIC_PRIO_IRQOFF. An NMI might also have occurred in a
+	 * section with interrupts disabled. Skip tracing in those cases.
 	 */
 	test_irqs_unmasked	res=x0, pmr=x20
 	cbz	x0, 1f
@@ -809,6 +828,7 @@ el0_ia:
 	 * Instruction abort handling
 	 */
 	mrs	x26, far_el1
+	gic_prio_kentry_setup tmp=x0
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -854,6 +874,7 @@ el0_sp_pc:
 	 * Stack or PC alignment exception handling
 	 */
 	mrs	x26, far_el1
+	gic_prio_kentry_setup tmp=x0
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -888,6 +909,7 @@ el0_dbg:
 	 * Debug exception handling
 	 */
 	tbnz	x24, #0, el0_inv		// EL0 only
+	gic_prio_kentry_setup tmp=x3
 	mrs	x0, far_el1
 	mov	x1, x25
 	mov	x2, sp
@@ -909,7 +931,9 @@ ENDPROC(el0_sync)
 el0_irq:
 	kernel_entry 0
 el0_irq_naked:
+	gic_prio_irq_setup pmr=x20, tmp=x0
 	enable_da_f
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
@@ -931,6 +955,7 @@ ENDPROC(el0_irq)
 el1_error:
 	kernel_entry 1
 	mrs	x1, esr_el1
+	gic_prio_kentry_setup tmp=x2
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
@@ -941,6 +966,7 @@ el0_error:
 	kernel_entry 0
 el0_error_naked:
 	mrs	x1, esr_el1
+	gic_prio_kentry_setup tmp=x2
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
@@ -965,6 +991,7 @@ work_pending:
  */
 ret_to_user:
 	disable_daif
+	gic_prio_kentry_setup tmp=x3
 	ldr	x1, [tsk, #TSK_TI_FLAGS]
 	and	x2, x1, #_TIF_WORK_MASK
 	cbnz	x2, work_pending
@@ -981,6 +1008,7 @@ ENDPROC(ret_to_user)
  */
 	.align	6
 el0_svc:
+	gic_prio_kentry_setup tmp=x1
 	mov	x0, sp
 	bl	el0_svc_handler
 	b	ret_to_user
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 3767fb2..58efc37 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -94,7 +94,7 @@ static void __cpu_do_idle_irqprio(void)
 	 * be raised.
 	 */
 	pmr = gic_read_pmr();
-	gic_write_pmr(GIC_PRIO_IRQON);
+	gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);

 	__cpu_do_idle();

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index bb4b3f0..4deaee3 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -192,11 +192,13 @@ static void init_gic_priority_masking(void)

 	WARN_ON(!(cpuflags & PSR_I_BIT));

-	gic_write_pmr(GIC_PRIO_IRQOFF);
-
 	/* We can only unmask PSR.I if we can take aborts */
-	if (!(cpuflags & PSR_A_BIT))
+	if (!(cpuflags & PSR_A_BIT)) {
+		gic_write_pmr(GIC_PRIO_IRQOFF);
 		write_sysreg(cpuflags & ~PSR_I_BIT, daif);
+	} else {
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+	}
 }

 /*
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 8799e0c..b89fcf0 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -615,7 +615,7 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
 	 * Naturally, we want to avoid this.
 	 */
 	if (system_uses_irq_prio_masking()) {
-		gic_write_pmr(GIC_PRIO_IRQON);
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
 		dsb(sy);
 	}

--
1.9.1

[PATCH v4 5/8] arm64: Fix incorrect irqflag restore for priority masking

[Julien Thierry]

When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
---
 arch/arm64/include/asm/arch_gicv3.h |  4 ++-
 arch/arm64/include/asm/daifflags.h  | 68 ++++++++++++++++++++++---------------
 arch/arm64/include/asm/irqflags.h   | 67 +++++++++++++++---------------------
 arch/arm64/include/asm/kvm_host.h   |  7 ++--
 arch/arm64/include/asm/ptrace.h     | 10 ++++--
 arch/arm64/kernel/entry.S           | 38 ++++++++++++++++++---
 arch/arm64/kernel/process.c         |  2 +-
 arch/arm64/kernel/smp.c             |  8 +++--
 arch/arm64/kvm/hyp/switch.c         |  2 +-
 9 files changed, 123 insertions(+), 83 deletions(-)

diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 14b41dd..9e991b6 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -163,7 +163,9 @@ static inline bool gic_prio_masking_enabled(void)

 static inline void gic_pmr_mask_irqs(void)
 {
-	BUILD_BUG_ON(GICD_INT_DEF_PRI <= GIC_PRIO_IRQOFF);
+	BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF |
+					 GIC_PRIO_PSR_I_SET));
+	BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON);
 	gic_write_pmr(GIC_PRIO_IRQOFF);
 }

diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index db452aa..f93204f 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -18,6 +18,7 @@

 #include <linux/irqflags.h>

+#include <asm/arch_gicv3.h>
 #include <asm/cpufeature.h>

 #define DAIF_PROCCTX		0
@@ -32,6 +33,11 @@ static inline void local_daif_mask(void)
 		:
 		:
 		: "memory");
+
+	/* Don't really care for a dsb here, we don't intend to enable IRQs */
+	if (system_uses_irq_prio_masking())
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+
 	trace_hardirqs_off();
 }

@@ -43,7 +49,7 @@ static inline unsigned long local_daif_save(void)

 	if (system_uses_irq_prio_masking()) {
 		/* If IRQs are masked with PMR, reflect it in the flags */
-		if (read_sysreg_s(SYS_ICC_PMR_EL1) <= GIC_PRIO_IRQOFF)
+		if (read_sysreg_s(SYS_ICC_PMR_EL1) != GIC_PRIO_IRQON)
 			flags |= PSR_I_BIT;
 	}

@@ -59,36 +65,44 @@ static inline void local_daif_restore(unsigned long flags)
 	if (!irq_disabled) {
 		trace_hardirqs_on();

-		if (system_uses_irq_prio_masking())
-			arch_local_irq_enable();
-	} else if (!(flags & PSR_A_BIT)) {
-		/*
-		 * If interrupts are disabled but we can take
-		 * asynchronous errors, we can take NMIs
-		 */
 		if (system_uses_irq_prio_masking()) {
-			flags &= ~PSR_I_BIT;
+			gic_write_pmr(GIC_PRIO_IRQON);
+			dsb(sy);
+		}
+	} else if (system_uses_irq_prio_masking()) {
+		u64 pmr;
+
+		if (!(flags & PSR_A_BIT)) {
 			/*
-			 * There has been concern that the write to daif
-			 * might be reordered before this write to PMR.
-			 * From the ARM ARM DDI 0487D.a, section D1.7.1
-			 * "Accessing PSTATE fields":
-			 *   Writes to the PSTATE fields have side-effects on
-			 *   various aspects of the PE operation. All of these
-			 *   side-effects are guaranteed:
-			 *     - Not to be visible to earlier instructions in
-			 *       the execution stream.
-			 *     - To be visible to later instructions in the
-			 *       execution stream
-			 *
-			 * Also, writes to PMR are self-synchronizing, so no
-			 * interrupts with a lower priority than PMR is signaled
-			 * to the PE after the write.
-			 *
-			 * So we don't need additional synchronization here.
+			 * If interrupts are disabled but we can take
+			 * asynchronous errors, we can take NMIs
 			 */
-			arch_local_irq_disable();
+			flags &= ~PSR_I_BIT;
+			pmr = GIC_PRIO_IRQOFF;
+		} else {
+			pmr = GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET;
 		}
+
+		/*
+		 * There has been concern that the write to daif
+		 * might be reordered before this write to PMR.
+		 * From the ARM ARM DDI 0487D.a, section D1.7.1
+		 * "Accessing PSTATE fields":
+		 *   Writes to the PSTATE fields have side-effects on
+		 *   various aspects of the PE operation. All of these
+		 *   side-effects are guaranteed:
+		 *     - Not to be visible to earlier instructions in
+		 *       the execution stream.
+		 *     - To be visible to later instructions in the
+		 *       execution stream
+		 *
+		 * Also, writes to PMR are self-synchronizing, so no
+		 * interrupts with a lower priority than PMR is signaled
+		 * to the PE after the write.
+		 *
+		 * So we don't need additional synchronization here.
+		 */
+		gic_write_pmr(pmr);
 	}

 	write_sysreg(flags, daif);
diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index fbe1aba..a137272 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -67,43 +67,46 @@ static inline void arch_local_irq_disable(void)
  */
 static inline unsigned long arch_local_save_flags(void)
 {
-	unsigned long daif_bits;
 	unsigned long flags;

-	daif_bits = read_sysreg(daif);
-
-	/*
-	 * The asm is logically equivalent to:
-	 *
-	 * if (system_uses_irq_prio_masking())
-	 *	flags = (daif_bits & PSR_I_BIT) ?
-	 *			GIC_PRIO_IRQOFF :
-	 *			read_sysreg_s(SYS_ICC_PMR_EL1);
-	 * else
-	 *	flags = daif_bits;
-	 */
 	asm volatile(ALTERNATIVE(
-			"mov	%0, %1\n"
-			"nop\n"
-			"nop",
-			__mrs_s("%0", SYS_ICC_PMR_EL1)
-			"ands	%1, %1, " __stringify(PSR_I_BIT) "\n"
-			"csel	%0, %0, %2, eq",
-			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "=&r" (flags), "+r" (daif_bits)
-		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
-		: "cc", "memory");
+		"mrs	%0, daif",
+		__mrs_s("%0", SYS_ICC_PMR_EL1),
+		ARM64_HAS_IRQ_PRIO_MASKING)
+		: "=&r" (flags)
+		:
+		: "memory");

 	return flags;
 }

+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+	int res;
+
+	asm volatile(ALTERNATIVE(
+		"and	%w0, %w1, #" __stringify(PSR_I_BIT),
+		"eor	%w0, %w1, #" __stringify(GIC_PRIO_IRQON),
+		ARM64_HAS_IRQ_PRIO_MASKING)
+		: "=&r" (res)
+		: "r" ((int) flags)
+		: "memory");
+
+	return res;
+}
+
 static inline unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;

 	flags = arch_local_save_flags();

-	arch_local_irq_disable();
+	/*
+	 * There are too many states with IRQs disabled, just keep the current
+	 * state if interrupts are already disabled/masked.
+	 */
+	if (!arch_irqs_disabled_flags(flags))
+		arch_local_irq_disable();

 	return flags;
 }
@@ -124,21 +127,5 @@ static inline void arch_local_irq_restore(unsigned long flags)
 		: "memory");
 }

-static inline int arch_irqs_disabled_flags(unsigned long flags)
-{
-	int res;
-
-	asm volatile(ALTERNATIVE(
-			"and	%w0, %w1, #" __stringify(PSR_I_BIT) "\n"
-			"nop",
-			"cmp	%w1, #" __stringify(GIC_PRIO_IRQOFF) "\n"
-			"cset	%w0, ls",
-			ARM64_HAS_IRQ_PRIO_MASKING)
-		: "=&r" (res)
-		: "r" ((int) flags)
-		: "cc", "memory");
-
-	return res;
-}
 #endif
 #endif
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 4bcd9c1..3341063 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -608,11 +608,12 @@ static inline void kvm_arm_vhe_guest_enter(void)
 	 * will not signal the CPU of interrupts of lower priority, and the
 	 * only way to get out will be via guest exceptions.
 	 * Naturally, we want to avoid this.
+	 *
+	 * local_daif_mask() already sets GIC_PRIO_PSR_I_SET, we just need a
+	 * dsb to ensure the redistributor is forwards EL2 IRQs to the CPU.
 	 */
-	if (system_uses_irq_prio_masking()) {
-		gic_write_pmr(GIC_PRIO_IRQON);
+	if (system_uses_irq_prio_masking())
 		dsb(sy);
-	}
 }

 static inline void kvm_arm_vhe_guest_exit(void)
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index b2de329..da22422 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -35,9 +35,15 @@
  * means masking more IRQs (or at least that the same IRQs remain masked).
  *
  * To mask interrupts, we clear the most significant bit of PMR.
+ *
+ * Some code sections either automatically switch back to PSR.I or explicitly
+ * require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included
+ * in the  the priority mask, it indicates that PSR.I should be set and
+ * interrupt disabling temporarily does not rely on IRQ priorities.
  */
-#define GIC_PRIO_IRQON		0xf0
-#define GIC_PRIO_IRQOFF		(GIC_PRIO_IRQON & ~0x80)
+#define GIC_PRIO_IRQON			0xc0
+#define GIC_PRIO_IRQOFF			(GIC_PRIO_IRQON & ~0x80)
+#define GIC_PRIO_PSR_I_SET		(1 << 4)

 /* Additional SPSR bits not exposed in the UABI */
 #define PSR_IL_BIT		(1 << 20)
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 6d59663..165da78 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -258,6 +258,7 @@ alternative_else_nop_endif
 	/*
 	 * Registers that may be useful after this macro is invoked:
 	 *
+	 * x20 - ICC_PMR_EL1
 	 * x21 - aborted SP
 	 * x22 - aborted PC
 	 * x23 - aborted PSTATE
@@ -449,6 +450,24 @@ alternative_endif
 	.endm
 #endif

+	.macro	gic_prio_kentry_setup, tmp:req
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	mov	\tmp, #(GIC_PRIO_PSR_I_SET | GIC_PRIO_IRQON)
+	msr_s	SYS_ICC_PMR_EL1, \tmp
+	alternative_else_nop_endif
+#endif
+	.endm
+
+	.macro	gic_prio_irq_setup, pmr:req, tmp:req
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+	alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+	orr	\tmp, \pmr, #GIC_PRIO_PSR_I_SET
+	msr_s	SYS_ICC_PMR_EL1, \tmp
+	alternative_else_nop_endif
+#endif
+	.endm
+
 	.text

 /*
@@ -627,6 +646,7 @@ el1_dbg:
 	cmp	x24, #ESR_ELx_EC_BRK64		// if BRK64
 	cinc	x24, x24, eq			// set bit '0'
 	tbz	x24, #0, el1_inv		// EL1 only
+	gic_prio_kentry_setup tmp=x3
 	mrs	x0, far_el1
 	mov	x2, sp				// struct pt_regs
 	bl	do_debug_exception
@@ -644,12 +664,10 @@ ENDPROC(el1_sync)
 	.align	6
 el1_irq:
 	kernel_entry 1
+	gic_prio_irq_setup pmr=x20, tmp=x1
 	enable_da_f

 #ifdef CONFIG_ARM64_PSEUDO_NMI
-alternative_if ARM64_HAS_IRQ_PRIO_MASKING
-	ldr	x20, [sp, #S_PMR_SAVE]
-alternative_else_nop_endif
 	test_irqs_unmasked	res=x0, pmr=x20
 	cbz	x0, 1f
 	bl	asm_nmi_enter
@@ -679,8 +697,9 @@ alternative_else_nop_endif

 #ifdef CONFIG_ARM64_PSEUDO_NMI
 	/*
-	 * if IRQs were disabled when we received the interrupt, we have an NMI
-	 * and we are not re-enabling interrupt upon eret. Skip tracing.
+	 * When using IRQ priority masking, we can get spurious interrupts while
+	 * PMR is set to GIC_PRIO_IRQOFF. An NMI might also have occurred in a
+	 * section with interrupts disabled. Skip tracing in those cases.
 	 */
 	test_irqs_unmasked	res=x0, pmr=x20
 	cbz	x0, 1f
@@ -809,6 +828,7 @@ el0_ia:
 	 * Instruction abort handling
 	 */
 	mrs	x26, far_el1
+	gic_prio_kentry_setup tmp=x0
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -854,6 +874,7 @@ el0_sp_pc:
 	 * Stack or PC alignment exception handling
 	 */
 	mrs	x26, far_el1
+	gic_prio_kentry_setup tmp=x0
 	enable_da_f
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -888,6 +909,7 @@ el0_dbg:
 	 * Debug exception handling
 	 */
 	tbnz	x24, #0, el0_inv		// EL0 only
+	gic_prio_kentry_setup tmp=x3
 	mrs	x0, far_el1
 	mov	x1, x25
 	mov	x2, sp
@@ -909,7 +931,9 @@ ENDPROC(el0_sync)
 el0_irq:
 	kernel_entry 0
 el0_irq_naked:
+	gic_prio_irq_setup pmr=x20, tmp=x0
 	enable_da_f
+
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
 #endif
@@ -931,6 +955,7 @@ ENDPROC(el0_irq)
 el1_error:
 	kernel_entry 1
 	mrs	x1, esr_el1
+	gic_prio_kentry_setup tmp=x2
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
@@ -941,6 +966,7 @@ el0_error:
 	kernel_entry 0
 el0_error_naked:
 	mrs	x1, esr_el1
+	gic_prio_kentry_setup tmp=x2
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
@@ -965,6 +991,7 @@ work_pending:
  */
 ret_to_user:
 	disable_daif
+	gic_prio_kentry_setup tmp=x3
 	ldr	x1, [tsk, #TSK_TI_FLAGS]
 	and	x2, x1, #_TIF_WORK_MASK
 	cbnz	x2, work_pending
@@ -981,6 +1008,7 @@ ENDPROC(ret_to_user)
  */
 	.align	6
 el0_svc:
+	gic_prio_kentry_setup tmp=x1
 	mov	x0, sp
 	bl	el0_svc_handler
 	b	ret_to_user
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 3767fb2..58efc37 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -94,7 +94,7 @@ static void __cpu_do_idle_irqprio(void)
 	 * be raised.
 	 */
 	pmr = gic_read_pmr();
-	gic_write_pmr(GIC_PRIO_IRQON);
+	gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);

 	__cpu_do_idle();

diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index bb4b3f0..4deaee3 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -192,11 +192,13 @@ static void init_gic_priority_masking(void)

 	WARN_ON(!(cpuflags & PSR_I_BIT));

-	gic_write_pmr(GIC_PRIO_IRQOFF);
-
 	/* We can only unmask PSR.I if we can take aborts */
-	if (!(cpuflags & PSR_A_BIT))
+	if (!(cpuflags & PSR_A_BIT)) {
+		gic_write_pmr(GIC_PRIO_IRQOFF);
 		write_sysreg(cpuflags & ~PSR_I_BIT, daif);
+	} else {
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
+	}
 }

 /*
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 8799e0c..b89fcf0 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -615,7 +615,7 @@ int __hyp_text __kvm_vcpu_run_nvhe(struct kvm_vcpu *vcpu)
 	 * Naturally, we want to avoid this.
 	 */
 	if (system_uses_irq_prio_masking()) {
-		gic_write_pmr(GIC_PRIO_IRQON);
+		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
 		dsb(sy);
 	}

--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 6/8] arm64: irqflags: Introduce explicit debugging for IRQ priorities

[Julien Thierry]

Using IRQ priority masking to enable/disable interrupts is a bit
sensitive as it requires to deal with both ICC_PMR_EL1 and PSR.I.

Introduce some validity checks to both highlight the states in which
functions dealing with IRQ enabling/disabling can (not) be called, and
bark a warning when called in an unexpected state.

Since these checks are done on hotpaths, introduce a build option to
choose whether to do the checking.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/Kconfig                  | 11 +++++++++++
 arch/arm64/include/asm/cpufeature.h |  6 ++++++
 arch/arm64/include/asm/daifflags.h  |  7 +++++++
 arch/arm64/include/asm/irqflags.h   | 12 ++++++++++++
 4 files changed, 36 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 697ea05..8acc40e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1436,6 +1436,17 @@ config ARM64_PSEUDO_NMI

 	  If unsure, say N

+if ARM64_PSEUDO_NMI
+config ARM64_DEBUG_PRIORITY_MASKING
+	bool "Debug interrupt priority masking"
+	help
+	  This adds runtime checks to functions enabling/disabling
+	  interrupts when using priority masking. The additional checks verify
+	  the validity of ICC_PMR_EL1 when calling concerned functions.
+
+	  If unsure, say N
+endif
+
 config RELOCATABLE
 	bool
 	help
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index bc895c8..693a086 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -617,6 +617,12 @@ static inline bool system_uses_irq_prio_masking(void)
 	       cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING);
 }

+static inline bool system_has_prio_mask_debugging(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING) &&
+	       system_uses_irq_prio_masking();
+}
+
 #define ARM64_SSBD_UNKNOWN		-1
 #define ARM64_SSBD_FORCE_DISABLE	0
 #define ARM64_SSBD_KERNEL		1
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index f93204f..eca5bee 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -28,6 +28,10 @@
 /* mask/save/unmask/restore all exceptions, including interrupts. */
 static inline void local_daif_mask(void)
 {
+	WARN_ON(system_has_prio_mask_debugging() &&
+		(read_sysreg_s(SYS_ICC_PMR_EL1) == (GIC_PRIO_IRQOFF |
+						    GIC_PRIO_PSR_I_SET)));
+
 	asm volatile(
 		"msr	daifset, #0xf		// local_daif_mask\n"
 		:
@@ -62,6 +66,9 @@ static inline void local_daif_restore(unsigned long flags)
 {
 	bool irq_disabled = flags & PSR_I_BIT;

+	WARN_ON(system_has_prio_mask_debugging() &&
+		!(read_sysreg(daif) & PSR_I_BIT));
+
 	if (!irq_disabled) {
 		trace_hardirqs_on();

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index a137272..cac2d2a 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -40,6 +40,12 @@
  */
 static inline void arch_local_irq_enable(void)
 {
+	if (system_has_prio_mask_debugging()) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
 	asm volatile(ALTERNATIVE(
 		"msr	daifclr, #2		// arch_local_irq_enable\n"
 		"nop",
@@ -53,6 +59,12 @@ static inline void arch_local_irq_enable(void)

 static inline void arch_local_irq_disable(void)
 {
+	if (system_has_prio_mask_debugging()) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
 	asm volatile(ALTERNATIVE(
 		"msr	daifset, #2		// arch_local_irq_disable",
 		__msr_s(SYS_ICC_PMR_EL1, "%0"),
--
1.9.1

[PATCH v4 6/8] arm64: irqflags: Introduce explicit debugging for IRQ priorities

[Julien Thierry]

Using IRQ priority masking to enable/disable interrupts is a bit
sensitive as it requires to deal with both ICC_PMR_EL1 and PSR.I.

Introduce some validity checks to both highlight the states in which
functions dealing with IRQ enabling/disabling can (not) be called, and
bark a warning when called in an unexpected state.

Since these checks are done on hotpaths, introduce a build option to
choose whether to do the checking.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/Kconfig                  | 11 +++++++++++
 arch/arm64/include/asm/cpufeature.h |  6 ++++++
 arch/arm64/include/asm/daifflags.h  |  7 +++++++
 arch/arm64/include/asm/irqflags.h   | 12 ++++++++++++
 4 files changed, 36 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 697ea05..8acc40e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1436,6 +1436,17 @@ config ARM64_PSEUDO_NMI

 	  If unsure, say N

+if ARM64_PSEUDO_NMI
+config ARM64_DEBUG_PRIORITY_MASKING
+	bool "Debug interrupt priority masking"
+	help
+	  This adds runtime checks to functions enabling/disabling
+	  interrupts when using priority masking. The additional checks verify
+	  the validity of ICC_PMR_EL1 when calling concerned functions.
+
+	  If unsure, say N
+endif
+
 config RELOCATABLE
 	bool
 	help
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index bc895c8..693a086 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -617,6 +617,12 @@ static inline bool system_uses_irq_prio_masking(void)
 	       cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING);
 }

+static inline bool system_has_prio_mask_debugging(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_DEBUG_PRIORITY_MASKING) &&
+	       system_uses_irq_prio_masking();
+}
+
 #define ARM64_SSBD_UNKNOWN		-1
 #define ARM64_SSBD_FORCE_DISABLE	0
 #define ARM64_SSBD_KERNEL		1
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index f93204f..eca5bee 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -28,6 +28,10 @@
 /* mask/save/unmask/restore all exceptions, including interrupts. */
 static inline void local_daif_mask(void)
 {
+	WARN_ON(system_has_prio_mask_debugging() &&
+		(read_sysreg_s(SYS_ICC_PMR_EL1) == (GIC_PRIO_IRQOFF |
+						    GIC_PRIO_PSR_I_SET)));
+
 	asm volatile(
 		"msr	daifset, #0xf		// local_daif_mask\n"
 		:
@@ -62,6 +66,9 @@ static inline void local_daif_restore(unsigned long flags)
 {
 	bool irq_disabled = flags & PSR_I_BIT;

+	WARN_ON(system_has_prio_mask_debugging() &&
+		!(read_sysreg(daif) & PSR_I_BIT));
+
 	if (!irq_disabled) {
 		trace_hardirqs_on();

diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
index a137272..cac2d2a 100644
--- a/arch/arm64/include/asm/irqflags.h
+++ b/arch/arm64/include/asm/irqflags.h
@@ -40,6 +40,12 @@
  */
 static inline void arch_local_irq_enable(void)
 {
+	if (system_has_prio_mask_debugging()) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
 	asm volatile(ALTERNATIVE(
 		"msr	daifclr, #2		// arch_local_irq_enable\n"
 		"nop",
@@ -53,6 +59,12 @@ static inline void arch_local_irq_enable(void)

 static inline void arch_local_irq_disable(void)
 {
+	if (system_has_prio_mask_debugging()) {
+		u32 pmr = read_sysreg_s(SYS_ICC_PMR_EL1);
+
+		WARN_ON_ONCE(pmr != GIC_PRIO_IRQON && pmr != GIC_PRIO_IRQOFF);
+	}
+
 	asm volatile(ALTERNATIVE(
 		"msr	daifset, #2		// arch_local_irq_disable",
 		__msr_s(SYS_ICC_PMR_EL1, "%0"),
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 7/8] arm64: fix kernel stack overflow in kdump capture kernel

[Julien Thierry]

From: Wei Li <liwei391@huawei.com>

When enabling ARM64_PSEUDO_NMI feature in kdump capture kernel, it will
report a kernel stack overflow exception:

[    0.000000] CPU features: detected: IRQ priority masking
[    0.000000] alternatives: patching kernel code
[    0.000000] Insufficient stack space to handle exception!
[    0.000000] ESR: 0x96000044 -- DABT (current EL)
[    0.000000] FAR: 0x0000000000000040
[    0.000000] Task stack:     [0xffff0000097f0000..0xffff0000097f4000]
[    0.000000] IRQ stack:      [0x0000000000000000..0x0000000000004000]
[    0.000000] Overflow stack: [0xffff80002b7cf290..0xffff80002b7d0290]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] pstate: 400003c5 (nZcv DAIF -PAN -UAO)
[    0.000000] pc : el1_sync+0x0/0xb8
[    0.000000] lr : el1_irq+0xb8/0x140
[    0.000000] sp : 0000000000000040
[    0.000000] pmr_save: 00000070
[    0.000000] x29: ffff0000097f3f60 x28: ffff000009806240
[    0.000000] x27: 0000000080000000 x26: 0000000000004000
[    0.000000] x25: 0000000000000000 x24: ffff000009329028
[    0.000000] x23: 0000000040000005 x22: ffff000008095c6c
[    0.000000] x21: ffff0000097f3f70 x20: 0000000000000070
[    0.000000] x19: ffff0000097f3e30 x18: ffffffffffffffff
[    0.000000] x17: 0000000000000000 x16: 0000000000000000
[    0.000000] x15: ffff0000097f9708 x14: ffff000089a382ef
[    0.000000] x13: ffff000009a382fd x12: ffff000009824000
[    0.000000] x11: ffff0000097fb7b0 x10: ffff000008730028
[    0.000000] x9 : ffff000009440018 x8 : 000000000000000d
[    0.000000] x7 : 6b20676e69686374 x6 : 000000000000003b
[    0.000000] x5 : 0000000000000000 x4 : ffff000008093600
[    0.000000] x3 : 0000000400000008 x2 : 7db2e689fc2b8e00
[    0.000000] x1 : 0000000000000000 x0 : ffff0000097f3e30
[    0.000000] Kernel panic - not syncing: kernel stack overflow
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] Call trace:
[    0.000000]  dump_backtrace+0x0/0x1b8
[    0.000000]  show_stack+0x24/0x30
[    0.000000]  dump_stack+0xa8/0xcc
[    0.000000]  panic+0x134/0x30c
[    0.000000]  __stack_chk_fail+0x0/0x28
[    0.000000]  handle_bad_stack+0xfc/0x108
[    0.000000]  __bad_stack+0x90/0x94
[    0.000000]  el1_sync+0x0/0xb8
[    0.000000]  init_gic_priority_masking+0x4c/0x70
[    0.000000]  smp_prepare_boot_cpu+0x60/0x68
[    0.000000]  start_kernel+0x1e8/0x53c
[    0.000000] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

The reason is init_gic_priority_masking() may unmask PSR.I while the
irq stacks are not inited yet. Some "NMI" could be raised unfortunately
and it will just go into this exception.

In this patch, we just write the PMR in smp_prepare_boot_cpu(), and delay
unmasking PSR.I after irq stacks inited in init_IRQ().

Fixes: e79321883842 ("arm64: Switch to PMR masking when starting CPUs")
Signed-off-by: Wei Li <liwei391@huawei.com>
[JT: make init_gic_priority_masking() not modify daif, rebase on other
     priority masking fixes]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/kernel/irq.c | 9 +++++++++
 arch/arm64/kernel/smp.c | 8 +-------
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index fdd9cb2..e8daa7a 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -77,6 +77,15 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+
+	if (system_uses_irq_prio_masking()) {
+		/*
+		 * Now that we have a stack for our IRQ handler, set
+		 * the PMR/PSR pair to a consistent state.
+		 */
+		WARN_ON(read_sysreg(daif) & PSR_A_BIT);
+		local_daif_restore(DAIF_PROCCTX_NOIRQ);
+	}
 }

 /*
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 4deaee3..83cdb0a 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -192,13 +192,7 @@ static void init_gic_priority_masking(void)

 	WARN_ON(!(cpuflags & PSR_I_BIT));

-	/* We can only unmask PSR.I if we can take aborts */
-	if (!(cpuflags & PSR_A_BIT)) {
-		gic_write_pmr(GIC_PRIO_IRQOFF);
-		write_sysreg(cpuflags & ~PSR_I_BIT, daif);
-	} else {
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-	}
+	gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
 }

 /*
--
1.9.1

[PATCH v4 7/8] arm64: fix kernel stack overflow in kdump capture kernel

[Julien Thierry]

From: Wei Li <liwei391@huawei.com>

When enabling ARM64_PSEUDO_NMI feature in kdump capture kernel, it will
report a kernel stack overflow exception:

[    0.000000] CPU features: detected: IRQ priority masking
[    0.000000] alternatives: patching kernel code
[    0.000000] Insufficient stack space to handle exception!
[    0.000000] ESR: 0x96000044 -- DABT (current EL)
[    0.000000] FAR: 0x0000000000000040
[    0.000000] Task stack:     [0xffff0000097f0000..0xffff0000097f4000]
[    0.000000] IRQ stack:      [0x0000000000000000..0x0000000000004000]
[    0.000000] Overflow stack: [0xffff80002b7cf290..0xffff80002b7d0290]
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] pstate: 400003c5 (nZcv DAIF -PAN -UAO)
[    0.000000] pc : el1_sync+0x0/0xb8
[    0.000000] lr : el1_irq+0xb8/0x140
[    0.000000] sp : 0000000000000040
[    0.000000] pmr_save: 00000070
[    0.000000] x29: ffff0000097f3f60 x28: ffff000009806240
[    0.000000] x27: 0000000080000000 x26: 0000000000004000
[    0.000000] x25: 0000000000000000 x24: ffff000009329028
[    0.000000] x23: 0000000040000005 x22: ffff000008095c6c
[    0.000000] x21: ffff0000097f3f70 x20: 0000000000000070
[    0.000000] x19: ffff0000097f3e30 x18: ffffffffffffffff
[    0.000000] x17: 0000000000000000 x16: 0000000000000000
[    0.000000] x15: ffff0000097f9708 x14: ffff000089a382ef
[    0.000000] x13: ffff000009a382fd x12: ffff000009824000
[    0.000000] x11: ffff0000097fb7b0 x10: ffff000008730028
[    0.000000] x9 : ffff000009440018 x8 : 000000000000000d
[    0.000000] x7 : 6b20676e69686374 x6 : 000000000000003b
[    0.000000] x5 : 0000000000000000 x4 : ffff000008093600
[    0.000000] x3 : 0000000400000008 x2 : 7db2e689fc2b8e00
[    0.000000] x1 : 0000000000000000 x0 : ffff0000097f3e30
[    0.000000] Kernel panic - not syncing: kernel stack overflow
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.34-lw+ #3
[    0.000000] Call trace:
[    0.000000]  dump_backtrace+0x0/0x1b8
[    0.000000]  show_stack+0x24/0x30
[    0.000000]  dump_stack+0xa8/0xcc
[    0.000000]  panic+0x134/0x30c
[    0.000000]  __stack_chk_fail+0x0/0x28
[    0.000000]  handle_bad_stack+0xfc/0x108
[    0.000000]  __bad_stack+0x90/0x94
[    0.000000]  el1_sync+0x0/0xb8
[    0.000000]  init_gic_priority_masking+0x4c/0x70
[    0.000000]  smp_prepare_boot_cpu+0x60/0x68
[    0.000000]  start_kernel+0x1e8/0x53c
[    0.000000] ---[ end Kernel panic - not syncing: kernel stack overflow ]---

The reason is init_gic_priority_masking() may unmask PSR.I while the
irq stacks are not inited yet. Some "NMI" could be raised unfortunately
and it will just go into this exception.

In this patch, we just write the PMR in smp_prepare_boot_cpu(), and delay
unmasking PSR.I after irq stacks inited in init_IRQ().

Fixes: e79321883842 ("arm64: Switch to PMR masking when starting CPUs")
Signed-off-by: Wei Li <liwei391@huawei.com>
[JT: make init_gic_priority_masking() not modify daif, rebase on other
     priority masking fixes]
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/kernel/irq.c | 9 +++++++++
 arch/arm64/kernel/smp.c | 8 +-------
 2 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index fdd9cb2..e8daa7a 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -77,6 +77,15 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+
+	if (system_uses_irq_prio_masking()) {
+		/*
+		 * Now that we have a stack for our IRQ handler, set
+		 * the PMR/PSR pair to a consistent state.
+		 */
+		WARN_ON(read_sysreg(daif) & PSR_A_BIT);
+		local_daif_restore(DAIF_PROCCTX_NOIRQ);
+	}
 }

 /*
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 4deaee3..83cdb0a 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -192,13 +192,7 @@ static void init_gic_priority_masking(void)

 	WARN_ON(!(cpuflags & PSR_I_BIT));

-	/* We can only unmask PSR.I if we can take aborts */
-	if (!(cpuflags & PSR_A_BIT)) {
-		gic_write_pmr(GIC_PRIO_IRQOFF);
-		write_sysreg(cpuflags & ~PSR_I_BIT, daif);
-	} else {
-		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
-	}
+	gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
 }

 /*
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 8/8] arm64: Allow selecting Pseudo-NMI again

[Julien Thierry]

Now that Pseudo-NMI are fixed, allow the use of that option again

This reverts commit 96a13f57b946be7a6c10405e4bd780c0b6b6fe63 ("arm64:
Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now").

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8acc40e..a9dde24 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1423,7 +1423,6 @@ config ARM64_MODULE_PLTS

 config ARM64_PSEUDO_NMI
 	bool "Support for NMI-like interrupts"
-	depends on BROKEN # 1556553607-46531-1-git-send-email-julien.thierry@arm.com
 	select CONFIG_ARM_GIC_V3
 	help
 	  Adds support for mimicking Non-Maskable Interrupts through the use of
--
1.9.1

[PATCH v4 8/8] arm64: Allow selecting Pseudo-NMI again

[Julien Thierry]

Now that Pseudo-NMI are fixed, allow the use of that option again

This reverts commit 96a13f57b946be7a6c10405e4bd780c0b6b6fe63 ("arm64:
Kconfig: Make ARM64_PSEUDO_NMI depend on BROKEN for now").

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/arm64/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 8acc40e..a9dde24 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1423,7 +1423,6 @@ config ARM64_MODULE_PLTS

 config ARM64_PSEUDO_NMI
 	bool "Support for NMI-like interrupts"
-	depends on BROKEN # 1556553607-46531-1-git-send-email-julien.thierry@arm.com
 	select CONFIG_ARM_GIC_V3
 	help
 	  Adds support for mimicking Non-Maskable Interrupts through the use of
--
1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 1/8] arm64: Do not enable IRQs for ct_user_exit

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:06AM +0100, Julien Thierry wrote:
> For el0_dbg and el0_error, DAIF bits get explicitly cleared before
> calling ct_user_exit.
> 
> When context tracking is disabled, DAIF gets set (almost) immediately
> after. When context tracking is enabled, among the first things done
> is disabling IRQs.
> 
> What is actually needed is:
> - PSR.D = 0 so the system can be debugged (should be already the case)
> - PSR.A = 0 so async error can be handled during context tracking
> 
> Do not clear PSR.I in those two locations.
> 
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Reviewed-by: James Morse <james.morse@arm.com>
> Cc:Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm64/kernel/entry.S | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index cd0c7af..89ab6bd 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -870,7 +870,7 @@ el0_dbg:
>  	mov	x1, x25
>  	mov	x2, sp
>  	bl	do_debug_exception
> -	enable_daif
> +	enable_da_f
>  	ct_user_exit
>  	b	ret_to_user
>  el0_inv:
> @@ -922,7 +922,7 @@ el0_error_naked:
>  	enable_dbg
>  	mov	x0, sp
>  	bl	do_serror
> -	enable_daif
> +	enable_da_f
>  	ct_user_exit
>  	b	ret_to_user
>  ENDPROC(el0_error)
> --
> 1.9.1

Re: [PATCH v4 1/8] arm64: Do not enable IRQs for ct_user_exit

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:06AM +0100, Julien Thierry wrote:
> For el0_dbg and el0_error, DAIF bits get explicitly cleared before
> calling ct_user_exit.
> 
> When context tracking is disabled, DAIF gets set (almost) immediately
> after. When context tracking is enabled, among the first things done
> is disabling IRQs.
> 
> What is actually needed is:
> - PSR.D = 0 so the system can be debugged (should be already the case)
> - PSR.A = 0 so async error can be handled during context tracking
> 
> Do not clear PSR.I in those two locations.
> 
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Reviewed-by: James Morse <james.morse@arm.com>
> Cc:Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm64/kernel/entry.S | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
> index cd0c7af..89ab6bd 100644
> --- a/arch/arm64/kernel/entry.S
> +++ b/arch/arm64/kernel/entry.S
> @@ -870,7 +870,7 @@ el0_dbg:
>  	mov	x1, x25
>  	mov	x2, sp
>  	bl	do_debug_exception
> -	enable_daif
> +	enable_da_f
>  	ct_user_exit
>  	b	ret_to_user
>  el0_inv:
> @@ -922,7 +922,7 @@ el0_error_naked:
>  	enable_dbg
>  	mov	x0, sp
>  	bl	do_serror
> -	enable_daif
> +	enable_da_f
>  	ct_user_exit
>  	b	ret_to_user
>  ENDPROC(el0_error)
> --
> 1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 2/8] arm64: irqflags: Pass flags as readonly operand to restore instruction

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:07AM +0100, Julien Thierry wrote:
> Flags are only read by the instructions doing the irqflags restore
> operation. Pass the operand as read only to the asm inline instead of
> read-write.
> 
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>

Acked-by: Mark Rutland <mark.rutland@ar.com>

Mark.

> ---
>  arch/arm64/include/asm/irqflags.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
> index 62996318..9c93152 100644
> --- a/arch/arm64/include/asm/irqflags.h
> +++ b/arch/arm64/include/asm/irqflags.h
> @@ -119,8 +119,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
>  			__msr_s(SYS_ICC_PMR_EL1, "%0")
>  			"dsb	sy",
>  			ARM64_HAS_IRQ_PRIO_MASKING)
> -		: "+r" (flags)
>  		:
> +		: "r" (flags)
>  		: "memory");
>  }
> 
> --
> 1.9.1

Re: [PATCH v4 2/8] arm64: irqflags: Pass flags as readonly operand to restore instruction

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:07AM +0100, Julien Thierry wrote:
> Flags are only read by the instructions doing the irqflags restore
> operation. Pass the operand as read only to the asm inline instead of
> read-write.
> 
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>

Acked-by: Mark Rutland <mark.rutland@ar.com>

Mark.

> ---
>  arch/arm64/include/asm/irqflags.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
> index 62996318..9c93152 100644
> --- a/arch/arm64/include/asm/irqflags.h
> +++ b/arch/arm64/include/asm/irqflags.h
> @@ -119,8 +119,8 @@ static inline void arch_local_irq_restore(unsigned long flags)
>  			__msr_s(SYS_ICC_PMR_EL1, "%0")
>  			"dsb	sy",
>  			ARM64_HAS_IRQ_PRIO_MASKING)
> -		: "+r" (flags)
>  		:
> +		: "r" (flags)
>  		: "memory");
>  }
> 
> --
> 1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 3/8] arm64: irqflags: Add condition flags to inline asm clobber list

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:08AM +0100, Julien Thierry wrote:
> Some of the inline assembly instruction use the condition flags and need
> to include "cc" in the clobber list.
> 
> Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
> Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm64/include/asm/irqflags.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
> index 9c93152..fbe1aba 100644
> --- a/arch/arm64/include/asm/irqflags.h
> +++ b/arch/arm64/include/asm/irqflags.h
> @@ -92,7 +92,7 @@ static inline unsigned long arch_local_save_flags(void)
>  			ARM64_HAS_IRQ_PRIO_MASKING)
>  		: "=&r" (flags), "+r" (daif_bits)
>  		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
> -		: "memory");
> +		: "cc", "memory");
> 
>  	return flags;
>  }
> @@ -136,7 +136,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
>  			ARM64_HAS_IRQ_PRIO_MASKING)
>  		: "=&r" (res)
>  		: "r" ((int) flags)
> -		: "memory");
> +		: "cc", "memory");
> 
>  	return res;
>  }
> --
> 1.9.1

Re: [PATCH v4 3/8] arm64: irqflags: Add condition flags to inline asm clobber list

[Mark Rutland]

On Tue, Jun 11, 2019 at 10:38:08AM +0100, Julien Thierry wrote:
> Some of the inline assembly instruction use the condition flags and need
> to include "cc" in the clobber list.
> 
> Fixes: commit 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
> Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Julien Thierry <julien.thierry@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>

Acked-by: Mark Rutland <mark.rutland@arm.com>

Mark.

> ---
>  arch/arm64/include/asm/irqflags.h | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
> index 9c93152..fbe1aba 100644
> --- a/arch/arm64/include/asm/irqflags.h
> +++ b/arch/arm64/include/asm/irqflags.h
> @@ -92,7 +92,7 @@ static inline unsigned long arch_local_save_flags(void)
>  			ARM64_HAS_IRQ_PRIO_MASKING)
>  		: "=&r" (flags), "+r" (daif_bits)
>  		: "r" ((unsigned long) GIC_PRIO_IRQOFF)
> -		: "memory");
> +		: "cc", "memory");
> 
>  	return flags;
>  }
> @@ -136,7 +136,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
>  			ARM64_HAS_IRQ_PRIO_MASKING)
>  		: "=&r" (res)
>  		: "r" ((int) flags)
> -		: "memory");
> +		: "cc", "memory");
> 
>  	return res;
>  }
> --
> 1.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Marc Zyngier]

Hi Julien,

On 11/06/2019 10:38, Julien Thierry wrote:
> Hi,
> 
> Version one[1] of this series attempted to fix the issue reported by
> Zenghui[2] when using the function_graph tracer with IRQ priority
> masking.
> 
> Since then, I realized that priority masking and the use of Pseudo-NMIs
> was more broken than I thought.
> 
> * Patch 1-2 are just some cleanup
> * Patch 3 fixes a potential issue with not clobbering condition flags
>   in irqflags operations
> * Patch 4 fixes an issue where calling C code in Pseudo-NMI before
>   entering NMI enter could lead to potential races
> * Patch 5 fixes the function_graph issue when using priority masking
> * Patch 6 introduces some debug to hopefully avoid breaking things in
>   the future
> * Patch 7 is a rebased version of the patch sent by Wei Li[3] fixing
>   an error that can happen during on some platform using the priority
>   masking feature
> * Patch 8 re-enables the Pseudo-NMI selection
> 
> Changes since V3 [4]:
> - Rebase on v5.2-rc4
> - Fix comments/typos/missed updates
> - Use single condition evalution for nmi_enter and nmi_exit

Thanks for following up on this. For the whole series:

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Marc Zyngier]

Hi Julien,

On 11/06/2019 10:38, Julien Thierry wrote:
> Hi,
> 
> Version one[1] of this series attempted to fix the issue reported by
> Zenghui[2] when using the function_graph tracer with IRQ priority
> masking.
> 
> Since then, I realized that priority masking and the use of Pseudo-NMIs
> was more broken than I thought.
> 
> * Patch 1-2 are just some cleanup
> * Patch 3 fixes a potential issue with not clobbering condition flags
>   in irqflags operations
> * Patch 4 fixes an issue where calling C code in Pseudo-NMI before
>   entering NMI enter could lead to potential races
> * Patch 5 fixes the function_graph issue when using priority masking
> * Patch 6 introduces some debug to hopefully avoid breaking things in
>   the future
> * Patch 7 is a rebased version of the patch sent by Wei Li[3] fixing
>   an error that can happen during on some platform using the priority
>   masking feature
> * Patch 8 re-enables the Pseudo-NMI selection
> 
> Changes since V3 [4]:
> - Rebase on v5.2-rc4
> - Fix comments/typos/missed updates
> - Use single condition evalution for nmi_enter and nmi_exit

Thanks for following up on this. For the whole series:

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>

	M.
-- 
Jazz is not dead. It just smells funny...

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Catalin Marinas]

On Tue, Jun 11, 2019 at 10:38:05AM +0100, Julien Thierry wrote:
> Julien Thierry (7):
>   arm64: Do not enable IRQs for ct_user_exit
>   arm64: irqflags: Pass flags as readonly operand to restore instruction
>   arm64: irqflags: Add condition flags to inline asm clobber list
>   arm64: Fix interrupt tracing in the presence of NMIs
>   arm64: Fix incorrect irqflag restore for priority masking
>   arm64: irqflags: Introduce explicit debugging for IRQ priorities
>   arm64: Allow selecting Pseudo-NMI again
> 
> Wei Li (1):
>   arm64: fix kernel stack overflow in kdump capture kernel

I queued these patches for 5.3 (and should appear in next soon). Thanks.

-- 
Catalin

Re: [PATCH v4 0/8] arm64: IRQ priority masking and Pseudo-NMI fixes

[Catalin Marinas]

On Tue, Jun 11, 2019 at 10:38:05AM +0100, Julien Thierry wrote:
> Julien Thierry (7):
>   arm64: Do not enable IRQs for ct_user_exit
>   arm64: irqflags: Pass flags as readonly operand to restore instruction
>   arm64: irqflags: Add condition flags to inline asm clobber list
>   arm64: Fix interrupt tracing in the presence of NMIs
>   arm64: Fix incorrect irqflag restore for priority masking
>   arm64: irqflags: Introduce explicit debugging for IRQ priorities
>   arm64: Allow selecting Pseudo-NMI again
> 
> Wei Li (1):
>   arm64: fix kernel stack overflow in kdump capture kernel

I queued these patches for 5.3 (and should appear in next soon). Thanks.

-- 
Catalin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel