[PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it

[PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it

[Sasha Levin]

From: Yingying Tang <yintang@codeaurora.org>

[ Upstream commit 9e7251fa38978b85108c44743e1436d48e8d0d76 ]

tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.

Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index c704ae371c4d..42931a669b02 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -663,6 +663,13 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
 
 	mutex_lock(&ar->conf_mutex);
 
+	if (!arsta->tx_stats) {
+		ath10k_warn(ar, "failed to get tx stats");
+		mutex_unlock(&ar->conf_mutex);
+		kfree(buf);
+		return 0;
+	}
+
 	spin_lock_bh(&ar->data_lock);
 	for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
 		for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 001/249] ath10k: Check tx_stats before use it

[Sasha Levin]

From: Yingying Tang <yintang@codeaurora.org>

[ Upstream commit 9e7251fa38978b85108c44743e1436d48e8d0d76 ]

tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.

Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index c704ae371c4d..42931a669b02 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -663,6 +663,13 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
 
 	mutex_lock(&ar->conf_mutex);
 
+	if (!arsta->tx_stats) {
+		ath10k_warn(ar, "failed to get tx stats");
+		mutex_unlock(&ar->conf_mutex);
+		kfree(buf);
+		return 0;
+	}
+
 	spin_lock_bh(&ar->data_lock);
 	for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
 		for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 002/249] ath10k: htt: don't use txdone_fifo with SDIO

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit e2a6b711282a371c5153239e0468a48254f17ca6 ]

HTT High Latency (ATH10K_DEV_TYPE_HL) does not use txdone_fifo at all, we don't
even initialise it by skipping ath10k_htt_tx_alloc_buf() in
ath10k_htt_tx_start(). Because of this using QCA6174 SDIO
ath10k_htt_rx_tx_compl_ind() will crash when it accesses unitialised
txdone_fifo. So skip txdone_fifo when using High Latency mode.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 1acc622d2183..f22840bbc389 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2277,7 +2277,9 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 		 *  Note that with only one concurrent reader and one concurrent
 		 *  writer, you don't need extra locking to use these macro.
 		 */
-		if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+			ath10k_txrx_tx_unref(htt, &tx_done);
+		} else if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
 			ath10k_warn(ar, "txdone fifo overrun, msdu_id %d status %d\n",
 				    tx_done.msdu_id, tx_done.status);
 			ath10k_txrx_tx_unref(htt, &tx_done);
-- 
2.20.1

[PATCH AUTOSEL 5.2 002/249] ath10k: htt: don't use txdone_fifo with SDIO

[Sasha Levin]

From: Alagu Sankar <alagusankar@silex-india.com>

[ Upstream commit e2a6b711282a371c5153239e0468a48254f17ca6 ]

HTT High Latency (ATH10K_DEV_TYPE_HL) does not use txdone_fifo at all, we don't
even initialise it by skipping ath10k_htt_tx_alloc_buf() in
ath10k_htt_tx_start(). Because of this using QCA6174 SDIO
ath10k_htt_rx_tx_compl_ind() will crash when it accesses unitialised
txdone_fifo. So skip txdone_fifo when using High Latency mode.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Co-developed-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Alagu Sankar <alagusankar@silex-india.com>
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 1acc622d2183..f22840bbc389 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2277,7 +2277,9 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 		 *  Note that with only one concurrent reader and one concurrent
 		 *  writer, you don't need extra locking to use these macro.
 		 */
-		if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
+		if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+			ath10k_txrx_tx_unref(htt, &tx_done);
+		} else if (!kfifo_put(&htt->txdone_fifo, tx_done)) {
 			ath10k_warn(ar, "txdone fifo overrun, msdu_id %d status %d\n",
 				    tx_done.msdu_id, tx_done.status);
 			ath10k_txrx_tx_unref(htt, &tx_done);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 003/249] ath10k: fix incorrect multicast/broadcast rate setting

[Sasha Levin]

From: Pradeep kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 93ee3d108fc77e19efeac3ec5aa7d5886711bfef ]

Invalid rate code is sent to firmware when multicast rate value of 0 is
sent to driver indicating disabled case, causing broken mesh path.
so fix that.

Tested on QCA9984 with firmware 10.4-3.6.1-00827

Sven tested on IPQ4019 with 10.4-3.5.3-00057 and QCA9888 with 10.4-3.5.3-00053
(ath10k-firmware) and 10.4-3.6-00140 (linux-firmware 2018-12-16-211de167).

Fixes: cd93b83ad92 ("ath10k: support for multicast rate control")
Co-developed-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d287333..e8997e22ceec 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5588,8 +5588,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	struct cfg80211_chan_def def;
 	u32 vdev_param, pdev_param, slottime, preamble;
 	u16 bitrate, hw_value;
-	u8 rate, basic_rate_idx;
-	int rateidx, ret = 0, hw_rate_code;
+	u8 rate, basic_rate_idx, rateidx;
+	int ret = 0, hw_rate_code, mcast_rate;
 	enum nl80211_band band;
 	const struct ieee80211_supported_band *sband;
 
@@ -5776,7 +5776,11 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_MCAST_RATE &&
 	    !ath10k_mac_vif_chan(arvif->vif, &def)) {
 		band = def.chan->band;
-		rateidx = vif->bss_conf.mcast_rate[band] - 1;
+		mcast_rate = vif->bss_conf.mcast_rate[band];
+		if (mcast_rate > 0)
+			rateidx = mcast_rate - 1;
+		else
+			rateidx = ffs(vif->bss_conf.basic_rates) - 1;
 
 		if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
 			rateidx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-- 
2.20.1

[PATCH AUTOSEL 5.2 003/249] ath10k: fix incorrect multicast/broadcast rate setting

[Sasha Levin]

From: Pradeep kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit 93ee3d108fc77e19efeac3ec5aa7d5886711bfef ]

Invalid rate code is sent to firmware when multicast rate value of 0 is
sent to driver indicating disabled case, causing broken mesh path.
so fix that.

Tested on QCA9984 with firmware 10.4-3.6.1-00827

Sven tested on IPQ4019 with 10.4-3.5.3-00057 and QCA9888 with 10.4-3.5.3-00053
(ath10k-firmware) and 10.4-3.6-00140 (linux-firmware 2018-12-16-211de167).

Fixes: cd93b83ad92 ("ath10k: support for multicast rate control")
Co-developed-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Tested-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c703d287333..e8997e22ceec 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5588,8 +5588,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	struct cfg80211_chan_def def;
 	u32 vdev_param, pdev_param, slottime, preamble;
 	u16 bitrate, hw_value;
-	u8 rate, basic_rate_idx;
-	int rateidx, ret = 0, hw_rate_code;
+	u8 rate, basic_rate_idx, rateidx;
+	int ret = 0, hw_rate_code, mcast_rate;
 	enum nl80211_band band;
 	const struct ieee80211_supported_band *sband;
 
@@ -5776,7 +5776,11 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_MCAST_RATE &&
 	    !ath10k_mac_vif_chan(arvif->vif, &def)) {
 		band = def.chan->band;
-		rateidx = vif->bss_conf.mcast_rate[band] - 1;
+		mcast_rate = vif->bss_conf.mcast_rate[band];
+		if (mcast_rate > 0)
+			rateidx = mcast_rate - 1;
+		else
+			rateidx = ffs(vif->bss_conf.basic_rates) - 1;
 
 		if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY)
 			rateidx += ATH10K_MAC_FIRST_OFDM_RATE_IDX;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 004/249] ath9k: Don't trust TX status TID number when reporting airtime

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 389b72e58259336c2d56d58b660b79cf4b9e0dcb ]

As already noted a comment in ath_tx_complete_aggr(), the hardware will
occasionally send a TX status with the wrong tid number. If we trust the
value, airtime usage will be reported to the wrong AC, which can cause the
deficit on that AC to become very low, blocking subsequent attempts to
transmit.

To fix this, account airtime usage to the TID number from the original skb,
instead of the one in the hardware TX status report.

Reported-by: Miguel Catalan Cid <miguel.catalan@i2cat.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/xmit.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index b17e1ca40995..3be0aeedb9b5 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -668,7 +668,8 @@ static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
 static void ath_tx_count_airtime(struct ath_softc *sc,
 				 struct ieee80211_sta *sta,
 				 struct ath_buf *bf,
-				 struct ath_tx_status *ts)
+				 struct ath_tx_status *ts,
+				 u8 tid)
 {
 	u32 airtime = 0;
 	int i;
@@ -679,7 +680,7 @@ static void ath_tx_count_airtime(struct ath_softc *sc,
 		airtime += rate_dur * bf->rates[i].count;
 	}
 
-	ieee80211_sta_register_airtime(sta, ts->tid, airtime, 0);
+	ieee80211_sta_register_airtime(sta, tid, airtime, 0);
 }
 
 static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
@@ -709,7 +710,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
 	if (sta) {
 		struct ath_node *an = (struct ath_node *)sta->drv_priv;
 		tid = ath_get_skb_tid(sc, an, bf->bf_mpdu);
-		ath_tx_count_airtime(sc, sta, bf, ts);
+		ath_tx_count_airtime(sc, sta, bf, ts, tid->tidno);
 		if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY))
 			tid->clear_ps_filter = true;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 005/249] wil6210: fix potential out-of-bounds read

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit bfabdd6997323adbedccb13a3fed1967fb8cf8f5 ]

Notice that *rc* can evaluate to up to 5, include/linux/netdevice.h:

enum gro_result {
        GRO_MERGED,
        GRO_MERGED_FREE,
        GRO_HELD,
        GRO_NORMAL,
        GRO_DROP,
        GRO_CONSUMED,
};
typedef enum gro_result gro_result_t;

In case *rc* evaluates to 5, we end up having an out-of-bounds read
at drivers/net/wireless/ath/wil6210/txrx.c:821:

	wil_dbg_txrx(wil, "Rx complete %d bytes => %s\n",
		     len, gro_res_str[rc]);

Fix this by adding element "GRO_CONSUMED" to array gro_res_str.

Addresses-Coverity-ID: 1444666 ("Out-of-bounds read")
Fixes: 194b482b5055 ("wil6210: Debug print GRO Rx result")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 4ccfd1404458..d74837cce67f 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -750,6 +750,7 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 		[GRO_HELD]		= "GRO_HELD",
 		[GRO_NORMAL]		= "GRO_NORMAL",
 		[GRO_DROP]		= "GRO_DROP",
+		[GRO_CONSUMED]		= "GRO_CONSUMED",
 	};
 
 	wil->txrx_ops.get_netif_rx_params(skb, &cid, &security);
-- 
2.20.1

[PATCH AUTOSEL 5.2 006/249] ath10k: Do not send probe response template for mesh

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]

Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.

To avoid this failure, skip sending probe response template to
firmware for mesh point.

Tested HW: WCN3990/QCA6174/QCA9984

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8997e22ceec..b500fd427595 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
 		return 0;
 
+	 /* For mesh, probe response and beacon share the same template */
+	if (ieee80211_vif_is_mesh(vif))
+		return 0;
+
 	prb = ieee80211_proberesp_get(hw, vif);
 	if (!prb) {
 		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
-- 
2.20.1

[PATCH AUTOSEL 5.2 006/249] ath10k: Do not send probe response template for mesh

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]

Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.

To avoid this failure, skip sending probe response template to
firmware for mesh point.

Tested HW: WCN3990/QCA6174/QCA9984

Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8997e22ceec..b500fd427595 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
 	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
 		return 0;
 
+	 /* For mesh, probe response and beacon share the same template */
+	if (ieee80211_vif_is_mesh(vif))
+		return 0;
+
 	prb = ieee80211_proberesp_get(hw, vif);
 	if (!prb) {
 		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 007/249] spi: rockchip: turn down tx dma bursts

[Sasha Levin]

From: Emil Renner Berthing <kernel@esmil.dk>

[ Upstream commit 47300728fb213486a830565d2af49da967c9d16a ]

This fixes tx and bi-directional dma transfers on rk3399-gru-kevin.

It seems the SPI fifo must have room for 2 bursts when the dma_tx_req
signal is generated or it might skip some words. This in turn makes
the rx dma channel never complete for bi-directional transfers.

Fix it by setting tx burst length to fifo_len / 4 and the dma
watermark to fifo_len / 2.

However the rk3399 TRM says (sic):
"DMAC support incrementing-address burst and fixed-address burst. But in
the case of access SPI and UART at byte or halfword size, DMAC only
support fixed-address burst and the address must be aligned to word."

So this relies on fifo_len being a multiple of 16 such that the
burst length (= fifo_len / 4) is a multiple of 4 and the addresses
will be word-aligned.

Fixes: dcfc861d24ec ("spi: rockchip: adjust dma watermark and burstlen")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-rockchip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 9b91188a85f9..2cc6d9951b52 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -417,7 +417,7 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs,
 			.direction = DMA_MEM_TO_DEV,
 			.dst_addr = rs->dma_addr_tx,
 			.dst_addr_width = rs->n_bytes,
-			.dst_maxburst = rs->fifo_len / 2,
+			.dst_maxburst = rs->fifo_len / 4,
 		};
 
 		dmaengine_slave_config(master->dma_tx, &txconf);
@@ -518,7 +518,7 @@ static void rockchip_spi_config(struct rockchip_spi *rs,
 	else
 		writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR);
 
-	writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_DMATDLR);
+	writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR);
 	writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR);
 	writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 008/249] ath9k: Check for errors when reading SREV register

[Sasha Levin]

From: Tim Schumacher <timschumi@gmx.de>

[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]

Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.

    ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
    ath: phy2: Failed to read SREV register
    ath: phy2: Could not read hardware revision
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath: phy2: Unable to initialize hardware; initialization status: -95
    ath9k_htc: Failed to initialize the device

This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.

Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8581d917635a..b6773d613f0c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -252,8 +252,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 /* Chip Revisions */
 /******************/
 
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
 {
+	u32 srev;
 	u32 val;
 
 	if (ah->get_mac_revision)
@@ -269,25 +270,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
 			val = REG_READ(ah, AR_SREV);
 			ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
 		}
-		return;
+		return true;
 	case AR9300_DEVID_AR9340:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9340;
-		return;
+		return true;
 	case AR9300_DEVID_QCA955X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9550;
-		return;
+		return true;
 	case AR9300_DEVID_AR953X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9531;
-		return;
+		return true;
 	case AR9300_DEVID_QCA956X:
 		ah->hw_version.macVersion = AR_SREV_VERSION_9561;
-		return;
+		return true;
 	}
 
-	val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+	srev = REG_READ(ah, AR_SREV);
+
+	if (srev == -EIO) {
+		ath_err(ath9k_hw_common(ah),
+			"Failed to read SREV register");
+		return false;
+	}
+
+	val = srev & AR_SREV_ID;
 
 	if (val == 0xFF) {
-		val = REG_READ(ah, AR_SREV);
+		val = srev;
 		ah->hw_version.macVersion =
 			(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
 		ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -306,6 +315,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
 		if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
 			ah->is_pciexpress = true;
 	}
+
+	return true;
 }
 
 /************************************/
@@ -559,7 +570,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	int r = 0;
 
-	ath9k_hw_read_revisions(ah);
+	if (!ath9k_hw_read_revisions(ah)) {
+		ath_err(common, "Could not read hardware revisions");
+		return -EOPNOTSUPP;
+	}
 
 	switch (ah->hw_version.macVersion) {
 	case AR_SREV_VERSION_5416_PCI:
-- 
2.20.1

[PATCH AUTOSEL 5.2 009/249] ath10k: Fix the wrong value of enums for wmi tlv stats id

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 9280f4fc06f44d0b4dc9e831f72d97b3d7cd35d3 ]

The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV
and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats
are not received from firmware in wmi_update_stats event.

Fix the enum values for above stats to receive all stats
from firmware in WMI_TLV_UPDATE_STATS_EVENTID.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: f40a307eb92c ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990)
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index e1c40bb69932..12f57f9adbba 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4535,9 +4535,10 @@ enum wmi_10_4_stats_id {
 };
 
 enum wmi_tlv_stats_id {
-	WMI_TLV_STAT_PDEV	= BIT(0),
-	WMI_TLV_STAT_VDEV	= BIT(1),
-	WMI_TLV_STAT_PEER	= BIT(2),
+	WMI_TLV_STAT_PEER	= BIT(0),
+	WMI_TLV_STAT_AP		= BIT(1),
+	WMI_TLV_STAT_PDEV	= BIT(2),
+	WMI_TLV_STAT_VDEV	= BIT(3),
 	WMI_TLV_STAT_PEER_EXTD  = BIT(10),
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 009/249] ath10k: Fix the wrong value of enums for wmi tlv stats id

[Sasha Levin]

From: Surabhi Vishnoi <svishnoi@codeaurora.org>

[ Upstream commit 9280f4fc06f44d0b4dc9e831f72d97b3d7cd35d3 ]

The enum value for WMI_TLV_STAT_PDEV, WMI_TLV_STAT_VDEV
and WMI_TLV_STAT_PEER is wrong, due to which the vdev stats
are not received from firmware in wmi_update_stats event.

Fix the enum values for above stats to receive all stats
from firmware in WMI_TLV_UPDATE_STATS_EVENTID.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: f40a307eb92c ("ath10k: Fill rx duration for each peer in fw_stats for WCN3990)
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index e1c40bb69932..12f57f9adbba 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4535,9 +4535,10 @@ enum wmi_10_4_stats_id {
 };
 
 enum wmi_tlv_stats_id {
-	WMI_TLV_STAT_PDEV	= BIT(0),
-	WMI_TLV_STAT_VDEV	= BIT(1),
-	WMI_TLV_STAT_PEER	= BIT(2),
+	WMI_TLV_STAT_PEER	= BIT(0),
+	WMI_TLV_STAT_AP		= BIT(1),
+	WMI_TLV_STAT_PDEV	= BIT(2),
+	WMI_TLV_STAT_VDEV	= BIT(3),
 	WMI_TLV_STAT_PEER_EXTD  = BIT(10),
 };
 
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 010/249] wil6210: fix missed MISC mbox interrupt

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit 7441be71ba7e07791fd4fa2b07c932dff14ff4d9 ]

When MISC interrupt is triggered due to HALP bit, in parallel
to mbox events handling by the MISC threaded IRQ, new mbox
interrupt can be missed in the following scenario:
1. MISC ICR is read in the IRQ handler
2. Threaded IRQ is completed and all MISC interrupts are unmasked
3. mbox interrupt is set by FW
4. HALP is masked
The mbox interrupt in step 3 can be missed due to constant high level
of ICM.
Masking all MISC IRQs instead of masking only HALP bit in step 4
will guarantee that ICM will drop to 0 and interrupt will be triggered
once MISC interrupts will be unmasked.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 3f5bd177d55f..e41ba24011d8 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -580,7 +580,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
 			/* no need to handle HALP ICRs until next vote */
 			wil->halp.handle_icr = false;
 			wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
-			wil6210_mask_halp(wil);
+			wil6210_mask_irq_misc(wil, true);
 			complete(&wil->halp.comp);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 011/249] ath6kl: add some bounds checking

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5d6751eaff672ea77642e74e92e6c0ac7f9709ab ]

The "ev->traffic_class" and "reply->ac" variables come from the network
and they're used as an offset into the wmi->stream_exist_for_ac[] array.
Those variables are u8 so they can be 0-255 but the stream_exist_for_ac[]
array only has WMM_NUM_AC (4) elements.  We need to add a couple bounds
checks to prevent array overflows.

I also modified one existing check from "if (traffic_class > 3) {" to
"if (traffic_class >= WMM_NUM_AC) {" just to make them all consistent.

Fixes: bdcd81707973 (" Add ath6kl cleaned up driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 68854c45d0a4..9ab6aa9ded5c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1176,6 +1176,10 @@ static int ath6kl_wmi_pstream_timeout_event_rx(struct wmi *wmi, u8 *datap,
 		return -EINVAL;
 
 	ev = (struct wmi_pstream_timeout_event *) datap;
+	if (ev->traffic_class >= WMM_NUM_AC) {
+		ath6kl_err("invalid traffic class: %d\n", ev->traffic_class);
+		return -EINVAL;
+	}
 
 	/*
 	 * When the pstream (fat pipe == AC) timesout, it means there were
@@ -1517,6 +1521,10 @@ static int ath6kl_wmi_cac_event_rx(struct wmi *wmi, u8 *datap, int len,
 		return -EINVAL;
 
 	reply = (struct wmi_cac_event *) datap;
+	if (reply->ac >= WMM_NUM_AC) {
+		ath6kl_err("invalid AC: %d\n", reply->ac);
+		return -EINVAL;
+	}
 
 	if ((reply->cac_indication == CAC_INDICATION_ADMISSION_RESP) &&
 	    (reply->status_code != IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED)) {
@@ -2633,7 +2641,7 @@ int ath6kl_wmi_delete_pstream_cmd(struct wmi *wmi, u8 if_idx, u8 traffic_class,
 	u16 active_tsids = 0;
 	int ret;
 
-	if (traffic_class > 3) {
+	if (traffic_class >= WMM_NUM_AC) {
 		ath6kl_err("invalid traffic class: %d\n", traffic_class);
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 012/249] ath10k: add peer id check in ath10k_peer_find_by_id

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 49ed34b835e231aa941257394716bc689bc98d9f ]

For some SDIO chip, the peer id is 65535 for MPDU with error status,
then test_bit will trigger buffer overflow for peer's memory, if kasan
enabled, it will report error.

Reason is when station is in disconnecting status, firmware do not delete
the peer info since it not disconnected completely, meanwhile some AP will
still send data packet to station, then hardware will receive the packet
and send to firmware, firmware's logic will report peer id of 65535 for
MPDU with error status.

Add check for overflow the size of peer's peer_ids will avoid the buffer
overflow access.

Call trace of kasan:
dump_backtrace+0x0/0x2ec
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xc8/0xec
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load8_noabort+0x20/0x2c
ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core]
ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core]
ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core]
ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio]
process_sdio_pending_irqs+0xec/0x370
sdio_run_irqs+0x68/0xe4
sdio_irq_work+0x1c/0x28
process_one_work+0x3d8/0x8b0
worker_thread+0x508/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index c5818d28f55a..4102df016931 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -150,6 +150,9 @@ struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar, int peer_id)
 {
 	struct ath10k_peer *peer;
 
+	if (peer_id >= BITS_PER_TYPE(peer->peer_ids))
+		return NULL;
+
 	lockdep_assert_held(&ar->data_lock);
 
 	list_for_each_entry(peer, &ar->peers, list)
-- 
2.20.1

[PATCH AUTOSEL 5.2 012/249] ath10k: add peer id check in ath10k_peer_find_by_id

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 49ed34b835e231aa941257394716bc689bc98d9f ]

For some SDIO chip, the peer id is 65535 for MPDU with error status,
then test_bit will trigger buffer overflow for peer's memory, if kasan
enabled, it will report error.

Reason is when station is in disconnecting status, firmware do not delete
the peer info since it not disconnected completely, meanwhile some AP will
still send data packet to station, then hardware will receive the packet
and send to firmware, firmware's logic will report peer id of 65535 for
MPDU with error status.

Add check for overflow the size of peer's peer_ids will avoid the buffer
overflow access.

Call trace of kasan:
dump_backtrace+0x0/0x2ec
show_stack+0x20/0x2c
__dump_stack+0x20/0x28
dump_stack+0xc8/0xec
print_address_description+0x74/0x240
kasan_report+0x250/0x26c
__asan_report_load8_noabort+0x20/0x2c
ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core]
ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core]
ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core]
ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio]
process_sdio_pending_irqs+0xec/0x370
sdio_run_irqs+0x68/0xe4
sdio_irq_work+0x1c/0x28
process_one_work+0x3d8/0x8b0
worker_thread+0x508/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/txrx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index c5818d28f55a..4102df016931 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -150,6 +150,9 @@ struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar, int peer_id)
 {
 	struct ath10k_peer *peer;
 
+	if (peer_id >= BITS_PER_TYPE(peer->peer_ids))
+		return NULL;
+
 	lockdep_assert_held(&ar->data_lock);
 
 	list_for_each_entry(peer, &ar->peers, list)
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 013/249] x86/tsc: Use CPUID.0x16 to calculate missing crystal frequency

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit 604dc9170f2435d27da5039a3efd757dceadc684 ]

native_calibrate_tsc() had a data mapping Intel CPU families
and crystal clock speed, but hardcoded tables are not ideal, and this
approach was already problematic at least in the Skylake X case, as
seen in commit:

  b51120309348 ("x86/tsc: Fix erroneous TSC rate on Skylake Xeon")

By examining CPUID data from http://instlatx64.atw.hu/ and units
in the lab, we have found that 3 different scenarios need to be dealt
with, and we can eliminate most of the hardcoded data using an approach a
little more advanced than before:

 1. ApolloLake, GeminiLake, CannonLake (and presumably all new chipsets
    from this point) report the crystal frequency directly via CPUID.0x15.
    That's definitive data that we can rely upon.

 2. Skylake, Kabylake and all variants of those two chipsets report a
    crystal frequency of zero, however we can calculate the crystal clock
    speed by condidering data from CPUID.0x16.

    This method correctly distinguishes between the two crystal clock
    frequencies present on different Skylake X variants that caused
    headaches before.

    As the calculations do not quite match the previously-hardcoded values
    in some cases (e.g. 23913043Hz instead of 24MHz), TSC refinement is
    enabled on all platforms where we had to calculate the crystal
    frequency in this way.

 3. Denverton (GOLDMONT_X) reports a crystal frequency of zero and does
    not support CPUID.0x16, so we leave this entry hardcoded.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: len.brown@intel.com
Cc: linux@endlessm.com
Cc: rafael.j.wysocki@intel.com
Link: http://lkml.kernel.org/r/20190509055417.13152-1-drake@endlessm.com
Link: https://lkml.kernel.org/r/20190419083533.32388-1-drake@endlessm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/tsc.c | 47 +++++++++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 0b29e58f288e..da029fd21460 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -632,31 +632,38 @@ unsigned long native_calibrate_tsc(void)
 
 	crystal_khz = ecx_hz / 1000;
 
-	if (crystal_khz == 0) {
-		switch (boot_cpu_data.x86_model) {
-		case INTEL_FAM6_SKYLAKE_MOBILE:
-		case INTEL_FAM6_SKYLAKE_DESKTOP:
-		case INTEL_FAM6_KABYLAKE_MOBILE:
-		case INTEL_FAM6_KABYLAKE_DESKTOP:
-			crystal_khz = 24000;	/* 24.0 MHz */
-			break;
-		case INTEL_FAM6_ATOM_GOLDMONT_X:
-			crystal_khz = 25000;	/* 25.0 MHz */
-			break;
-		case INTEL_FAM6_ATOM_GOLDMONT:
-			crystal_khz = 19200;	/* 19.2 MHz */
-			break;
-		}
-	}
+	/*
+	 * Denverton SoCs don't report crystal clock, and also don't support
+	 * CPUID.0x16 for the calculation below, so hardcode the 25MHz crystal
+	 * clock.
+	 */
+	if (crystal_khz == 0 &&
+			boot_cpu_data.x86_model == INTEL_FAM6_ATOM_GOLDMONT_X)
+		crystal_khz = 25000;
 
-	if (crystal_khz == 0)
-		return 0;
 	/*
-	 * TSC frequency determined by CPUID is a "hardware reported"
+	 * TSC frequency reported directly by CPUID is a "hardware reported"
 	 * frequency and is the most accurate one so far we have. This
 	 * is considered a known frequency.
 	 */
-	setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
+	if (crystal_khz != 0)
+		setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
+
+	/*
+	 * Some Intel SoCs like Skylake and Kabylake don't report the crystal
+	 * clock, but we can easily calculate it to a high degree of accuracy
+	 * by considering the crystal ratio and the CPU speed.
+	 */
+	if (crystal_khz == 0 && boot_cpu_data.cpuid_level >= 0x16) {
+		unsigned int eax_base_mhz, ebx, ecx, edx;
+
+		cpuid(0x16, &eax_base_mhz, &ebx, &ecx, &edx);
+		crystal_khz = eax_base_mhz * 1000 *
+			eax_denominator / ebx_numerator;
+	}
+
+	if (crystal_khz == 0)
+		return 0;
 
 	/*
 	 * For Atom SoCs TSC is the only reliable clocksource.
-- 
2.20.1

[PATCH AUTOSEL 5.2 014/249] wil6210: fix spurious interrupts in 3-msi

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit e10b0eddd5235aa5aef4e40b970e34e735611a80 ]

Interrupt is set in ICM (ICR & ~IMV) rising trigger.
As the driver masks the IRQ after clearing it, there can
be a race where an additional spurious interrupt is triggered
when the driver unmask the IRQ.
This can happen in case HW triggers an interrupt after the clear
and before the mask.

To prevent the second spurious interrupt the driver needs to mask the
IRQ before reading and clearing it.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/interrupt.c | 65 ++++++++++++--------
 1 file changed, 40 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index e41ba24011d8..b00a13d6d530 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -296,21 +296,24 @@ void wil_configure_interrupt_moderation(struct wil6210_priv *wil)
 static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_RX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_rx(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_RX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_rx(isr);
 	wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err_ratelimited(wil, "spurious IRQ: RX\n");
+		wil6210_unmask_irq_rx(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_rx(wil);
-
 	/* RX_DONE and RX_HTRSH interrupts are the same if interrupt
 	 * moderation is not used. Interrupt moderation may cause RX
 	 * buffer overflow while RX_DONE is delayed. The required
@@ -355,21 +358,24 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
 static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_INT_GEN_RX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_rx_edma(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_INT_GEN_RX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_rx(isr);
 	wil_dbg_irq(wil, "ISR RX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err(wil, "spurious IRQ: RX\n");
+		wil6210_unmask_irq_rx_edma(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_rx_edma(wil);
-
 	if (likely(isr & BIT_RX_STATUS_IRQ)) {
 		wil_dbg_irq(wil, "RX status ring\n");
 		isr &= ~BIT_RX_STATUS_IRQ;
@@ -403,21 +409,24 @@ static irqreturn_t wil6210_irq_rx_edma(int irq, void *cookie)
 static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_INT_GEN_TX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_tx_edma(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_INT_GEN_TX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_tx(isr);
 	wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err(wil, "spurious IRQ: TX\n");
+		wil6210_unmask_irq_tx_edma(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_tx_edma(wil);
-
 	if (likely(isr & BIT_TX_STATUS_IRQ)) {
 		wil_dbg_irq(wil, "TX status ring\n");
 		isr &= ~BIT_TX_STATUS_IRQ;
@@ -446,21 +455,24 @@ static irqreturn_t wil6210_irq_tx_edma(int irq, void *cookie)
 static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_TX_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
 	bool need_unmask = true;
 
+	wil6210_mask_irq_tx(wil);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_TX_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
+
 	trace_wil6210_irq_tx(isr);
 	wil_dbg_irq(wil, "ISR TX 0x%08x\n", isr);
 
 	if (unlikely(!isr)) {
 		wil_err_ratelimited(wil, "spurious IRQ: TX\n");
+		wil6210_unmask_irq_tx(wil);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_tx(wil);
-
 	if (likely(isr & BIT_DMA_EP_TX_ICR_TX_DONE)) {
 		wil_dbg_irq(wil, "TX done\n");
 		isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
@@ -532,20 +544,23 @@ static bool wil_validate_mbox_regs(struct wil6210_priv *wil)
 static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
 {
 	struct wil6210_priv *wil = cookie;
-	u32 isr = wil_ioread32_and_clear(wil->csr +
-					 HOSTADDR(RGF_DMA_EP_MISC_ICR) +
-					 offsetof(struct RGF_ICR, ICR));
+	u32 isr;
+
+	wil6210_mask_irq_misc(wil, false);
+
+	isr = wil_ioread32_and_clear(wil->csr +
+				     HOSTADDR(RGF_DMA_EP_MISC_ICR) +
+				     offsetof(struct RGF_ICR, ICR));
 
 	trace_wil6210_irq_misc(isr);
 	wil_dbg_irq(wil, "ISR MISC 0x%08x\n", isr);
 
 	if (!isr) {
 		wil_err(wil, "spurious IRQ: MISC\n");
+		wil6210_unmask_irq_misc(wil, false);
 		return IRQ_NONE;
 	}
 
-	wil6210_mask_irq_misc(wil, false);
-
 	if (isr & ISR_MISC_FW_ERROR) {
 		u32 fw_assert_code = wil_r(wil, wil->rgf_fw_assert_code_addr);
 		u32 ucode_assert_code =
-- 
2.20.1

[PATCH AUTOSEL 5.2 015/249] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection

[Sasha Levin]

From: Anilkumar Kolli <akolli@codeaurora.org>

[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ]

Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.

Tested ath10k hw and fw:
	* QCA9888(10.4-3.5.1-00052)
	* QCA4019(10.4-3.2.1.1-00017)
	* QCA9984(10.4-3.6-00104)
	* QCA988X(10.2.4-1.0-00041)

Tested ath9k hw: AR9300

Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index d52b31b45df7..a274eb0d1968 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -111,7 +111,7 @@ static const struct radar_detector_specs jp_radar_ref_types[] = {
 	JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false),
 	JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false),
 	JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
-	JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+	JP_PATTERN(3, 0, 4, 4000, 4000, 1, 18, 50, false),
 	JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
 	JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
 	JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
-- 
2.20.1

[PATCH AUTOSEL 5.2 016/249] ath10k: Fix encoding for protected management frames

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]

Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.

Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 582fb11f648a..02709fc99034 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2840,8 +2840,10 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if ((ieee80211_is_action(hdr->frame_control) ||
 	     ieee80211_is_deauth(hdr->frame_control) ||
 	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control))
+	     ieee80211_has_protected(hdr->frame_control)) {
+		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
 		buf_len += IEEE80211_CCMP_MIC_LEN;
+	}
 
 	buf_len = min_t(u32, buf_len, WMI_TLV_MGMT_TX_FRAME_MAX_LEN);
 	buf_len = round_up(buf_len, 4);
-- 
2.20.1

[PATCH AUTOSEL 5.2 016/249] ath10k: Fix encoding for protected management frames

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]

Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.

Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 582fb11f648a..02709fc99034 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2840,8 +2840,10 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
 	if ((ieee80211_is_action(hdr->frame_control) ||
 	     ieee80211_is_deauth(hdr->frame_control) ||
 	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control))
+	     ieee80211_has_protected(hdr->frame_control)) {
+		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
 		buf_len += IEEE80211_CCMP_MIC_LEN;
+	}
 
 	buf_len = min_t(u32, buf_len, WMI_TLV_MGMT_TX_FRAME_MAX_LEN);
 	buf_len = round_up(buf_len, 4);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 017/249] regmap: debugfs: Fix memory leak in regmap_debugfs_init

[Sasha Levin]

From: Daniel Baluta <daniel.baluta@nxp.com>

[ Upstream commit 2899872b627e99b7586fe3b6c9f861da1b4d5072 ]

As detected by kmemleak running on i.MX6ULL board:

nreferenced object 0xd8366600 (size 64):
  comm "swapper/0", pid 1, jiffies 4294937370 (age 933.220s)
  hex dump (first 32 bytes):
    64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72  dummy-iomuxc-gpr
    40 32 30 65 34 30 30 30 00 e3 f3 ab fe d1 1b dd  @20e4000........
  backtrace:
    [<b0402aec>] kasprintf+0x2c/0x54
    [<a6fbad2c>] regmap_debugfs_init+0x7c/0x31c
    [<9c8d91fa>] __regmap_init+0xb5c/0xcf4
    [<5b1c3d2a>] of_syscon_register+0x164/0x2c4
    [<596a5d80>] syscon_node_to_regmap+0x64/0x90
    [<49bd597b>] imx6ul_init_machine+0x34/0xa0
    [<250a4dac>] customize_machine+0x1c/0x30
    [<2d19fdaf>] do_one_initcall+0x7c/0x398
    [<e6084469>] kernel_init_freeable+0x328/0x448
    [<168c9101>] kernel_init+0x8/0x114
    [<913268aa>] ret_from_fork+0x14/0x20
    [<ce7b131a>] 0x0

Root cause is that map->debugfs_name is allocated using kasprintf
and then the pointer is lost by assigning it other memory address.

Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap-debugfs.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/base/regmap/regmap-debugfs.c b/drivers/base/regmap/regmap-debugfs.c
index 263f82516ff4..e5e1b3a01b1a 100644
--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -579,6 +579,8 @@ void regmap_debugfs_init(struct regmap *map, const char *name)
 	}
 
 	if (!strcmp(name, "dummy")) {
+		kfree(map->debugfs_name);
+
 		map->debugfs_name = kasprintf(GFP_KERNEL, "dummy%d",
 						dummy_index);
 		name = map->debugfs_name;
-- 
2.20.1

[PATCH AUTOSEL 5.2 018/249] batman-adv: fix for leaked TVLV handler.

[Sasha Levin]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 17f78dd1bd624a4dd78ed5db3284a63ee807fcc3 ]

A handler for BATADV_TVLV_ROAM was being registered when the
translation-table was initialized, but not unregistered when the
translation-table was freed.  Unregister it.

Fixes: 122edaa05940 ("batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packets")
Reported-by: syzbot+d454a826e670502484b8@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/translation-table.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index 1ddfd5e011ee..8a482c5ec67b 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -3813,6 +3813,8 @@ static void batadv_tt_purge(struct work_struct *work)
  */
 void batadv_tt_free(struct batadv_priv *bat_priv)
 {
+	batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_ROAM, 1);
+
 	batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_TT, 1);
 	batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_TT, 1);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 019/249] media: dvb: usb: fix use after free in dvb_usb_device_exit

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 6cf97230cd5f36b7665099083272595c55d72be7 ]

dvb_usb_device_exit() frees and uses the device name in that order.
Fix by storing the name in a buffer before freeing it.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+26ec41e9f788b3eba396@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/dvb-usb/dvb-usb-init.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index e97f6edc98de..65f2b1a20ca1 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -284,12 +284,15 @@ EXPORT_SYMBOL(dvb_usb_device_init);
 void dvb_usb_device_exit(struct usb_interface *intf)
 {
 	struct dvb_usb_device *d = usb_get_intfdata(intf);
-	const char *name = "generic DVB-USB module";
+	const char *default_name = "generic DVB-USB module";
+	char name[40];
 
 	usb_set_intfdata(intf, NULL);
 	if (d != NULL && d->desc != NULL) {
-		name = d->desc->name;
+		strscpy(name, d->desc->name, sizeof(name));
 		dvb_usb_exit(d);
+	} else {
+		strscpy(name, default_name, sizeof(name));
 	}
 	info("%s successfully deinitialized and disconnected.", name);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 020/249] media: spi: IR LED: add missing of table registration

[Sasha Levin]

From: Daniel Gomez <dagmcr@gmail.com>

[ Upstream commit 24e4cf770371df6ad49ed873f21618d9878f64c8 ]

MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT
OF mathing mechanism and register it.

Before this patch:
modinfo drivers/media/rc/ir-spi.ko  | grep alias

After this patch:
modinfo drivers/media/rc/ir-spi.ko  | grep alias
alias:          of:N*T*Cir-spi-ledC*
alias:          of:N*T*Cir-spi-led

Reported-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Daniel Gomez <dagmcr@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/rc/ir-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/rc/ir-spi.c b/drivers/media/rc/ir-spi.c
index 66334e8d63ba..c58f2d38a458 100644
--- a/drivers/media/rc/ir-spi.c
+++ b/drivers/media/rc/ir-spi.c
@@ -161,6 +161,7 @@ static const struct of_device_id ir_spi_of_match[] = {
 	{ .compatible = "ir-spi-led" },
 	{},
 };
+MODULE_DEVICE_TABLE(of, ir_spi_of_match);
 
 static struct spi_driver ir_spi_driver = {
 	.probe = ir_spi_probe,
-- 
2.20.1

[PATCH AUTOSEL 5.2 021/249] crypto: talitos - fix skcipher failure due to wrong output IV

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 3e03e792865ae48b8cfc69a0b4d65f02f467389f ]

Selftests report the following:

[    2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[    3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    3.043185] 00000000: fe dc ba 98 76 54 32 10
[    3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[    3.073818] 00000000: 7d 33 88 93 0f 93 b2 42

This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.

This patch fixes that.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/talitos.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 427c78d4d948..2d9a0971a7fc 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1624,11 +1624,15 @@ static void ablkcipher_done(struct device *dev,
 			    int err)
 {
 	struct ablkcipher_request *areq = context;
+	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+	unsigned int ivsize = crypto_ablkcipher_ivsize(cipher);
 	struct talitos_edesc *edesc;
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
 	common_nonsnoop_unmap(dev, edesc, areq);
+	memcpy(areq->info, ctx->iv, ivsize);
 
 	kfree(edesc);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 022/249] media: ov7740: avoid invalid framesize setting

[Sasha Levin]

From: Akinobu Mita <akinobu.mita@gmail.com>

[ Upstream commit 6e4ab830ac6d6a0d7cd7f87dc5d6536369bf24a8 ]

If the requested framesize by VIDIOC_SUBDEV_S_FMT is larger than supported
framesizes, it causes an out of bounds array access and the resulting
framesize is unexpected.

Avoid out of bounds array access and select the default framesize.

Cc: Wenyou Yang <wenyou.yang@microchip.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov7740.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 54e80a60aa57..63011d4b4738 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -785,7 +785,11 @@ static int ov7740_try_fmt_internal(struct v4l2_subdev *sd,
 
 		fsize++;
 	}
-
+	if (i >= ARRAY_SIZE(ov7740_framesizes)) {
+		fsize = &ov7740_framesizes[0];
+		fmt->width = fsize->width;
+		fmt->height = fsize->height;
+	}
 	if (ret_frmsize != NULL)
 		*ret_frmsize = fsize;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 023/249] media: marvell-ccic: fix DMA s/g desc number calculation

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 0c7aa32966dab0b8a7424e1b34c7f206817953ec ]

The commit d790b7eda953 ("[media] vb2-dma-sg: move dma_(un)map_sg here")
left dma_desc_nent unset. It previously contained the number of DMA
descriptors as returned from dma_map_sg().

We can now (since the commit referred to above) obtain the same value from
the sg_table and drop dma_desc_nent altogether.

Tested on OLPC XO-1.75 machine. Doesn't affect the OLPC XO-1's Cafe
driver, since that one doesn't do DMA.

[mchehab+samsung@kernel.org: fix a checkpatch warning]

Fixes: d790b7eda953 ("[media] vb2-dma-sg: move dma_(un)map_sg here")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/marvell-ccic/mcam-core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index f1b301810260..0a6411b877e9 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -200,7 +200,6 @@ struct mcam_vb_buffer {
 	struct list_head queue;
 	struct mcam_dma_desc *dma_desc;	/* Descriptor virtual address */
 	dma_addr_t dma_desc_pa;		/* Descriptor physical address */
-	int dma_desc_nent;		/* Number of mapped descriptors */
 };
 
 static inline struct mcam_vb_buffer *vb_to_mvb(struct vb2_v4l2_buffer *vb)
@@ -608,9 +607,11 @@ static void mcam_dma_contig_done(struct mcam_camera *cam, int frame)
 static void mcam_sg_next_buffer(struct mcam_camera *cam)
 {
 	struct mcam_vb_buffer *buf;
+	struct sg_table *sg_table;
 
 	buf = list_first_entry(&cam->buffers, struct mcam_vb_buffer, queue);
 	list_del_init(&buf->queue);
+	sg_table = vb2_dma_sg_plane_desc(&buf->vb_buf.vb2_buf, 0);
 	/*
 	 * Very Bad Not Good Things happen if you don't clear
 	 * C1_DESC_ENA before making any descriptor changes.
@@ -618,7 +619,7 @@ static void mcam_sg_next_buffer(struct mcam_camera *cam)
 	mcam_reg_clear_bit(cam, REG_CTRL1, C1_DESC_ENA);
 	mcam_reg_write(cam, REG_DMA_DESC_Y, buf->dma_desc_pa);
 	mcam_reg_write(cam, REG_DESC_LEN_Y,
-			buf->dma_desc_nent*sizeof(struct mcam_dma_desc));
+			sg_table->nents * sizeof(struct mcam_dma_desc));
 	mcam_reg_write(cam, REG_DESC_LEN_U, 0);
 	mcam_reg_write(cam, REG_DESC_LEN_V, 0);
 	mcam_reg_set_bit(cam, REG_CTRL1, C1_DESC_ENA);
-- 
2.20.1

[PATCH AUTOSEL 5.2 024/249] selftests/bpf: adjust verifier scale test

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit 7c0c6095d48dcd0e67c917aa73cdbb2715aafc36 ]

Adjust scale tests to check for new jmp sequence limit.

BPF_JGT had to be changed to BPF_JEQ because the verifier was
too smart. It tracked the known safe range of R0 values
and pruned the search earlier before hitting exact 8192 limit.
bpf_semi_rand_get() was too (un)?lucky.

k = 0; was missing in bpf_fill_scale2.
It was testing a bit shorter sequence of jumps than intended.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_verifier.c | 31 +++++++++++----------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 288cb740e005..6438d4dc8ae1 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -207,33 +207,35 @@ static void bpf_fill_rand_ld_dw(struct bpf_test *self)
 	self->retval = (uint32_t)res;
 }
 
-/* test the sequence of 1k jumps */
+#define MAX_JMP_SEQ 8192
+
+/* test the sequence of 8k jumps */
 static void bpf_fill_scale1(struct bpf_test *self)
 {
 	struct bpf_insn *insn = self->fill_insns;
 	int i = 0, k = 0;
 
 	insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1);
-	/* test to check that the sequence of 1024 jumps is acceptable */
-	while (k++ < 1024) {
+	/* test to check that the long sequence of jumps is acceptable */
+	while (k++ < MAX_JMP_SEQ) {
 		insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 					 BPF_FUNC_get_prandom_u32);
-		insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2);
+		insn[i++] = BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, bpf_semi_rand_get(), 2);
 		insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10);
 		insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6,
 					-8 * (k % 64 + 1));
 	}
-	/* every jump adds 1024 steps to insn_processed, so to stay exactly
-	 * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT
+	/* every jump adds 1 step to insn_processed, so to stay exactly
+	 * within 1m limit add MAX_TEST_INSNS - MAX_JMP_SEQ - 1 MOVs and 1 EXIT
 	 */
-	while (i < MAX_TEST_INSNS - 1025)
+	while (i < MAX_TEST_INSNS - MAX_JMP_SEQ - 1)
 		insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42);
 	insn[i] = BPF_EXIT_INSN();
 	self->prog_len = i + 1;
 	self->retval = 42;
 }
 
-/* test the sequence of 1k jumps in inner most function (function depth 8)*/
+/* test the sequence of 8k jumps in inner most function (function depth 8)*/
 static void bpf_fill_scale2(struct bpf_test *self)
 {
 	struct bpf_insn *insn = self->fill_insns;
@@ -245,19 +247,20 @@ static void bpf_fill_scale2(struct bpf_test *self)
 		insn[i++] = BPF_EXIT_INSN();
 	}
 	insn[i++] = BPF_MOV64_REG(BPF_REG_6, BPF_REG_1);
-	/* test to check that the sequence of 1024 jumps is acceptable */
-	while (k++ < 1024) {
+	/* test to check that the long sequence of jumps is acceptable */
+	k = 0;
+	while (k++ < MAX_JMP_SEQ) {
 		insn[i++] = BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 					 BPF_FUNC_get_prandom_u32);
-		insn[i++] = BPF_JMP_IMM(BPF_JGT, BPF_REG_0, bpf_semi_rand_get(), 2);
+		insn[i++] = BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, bpf_semi_rand_get(), 2);
 		insn[i++] = BPF_MOV64_REG(BPF_REG_1, BPF_REG_10);
 		insn[i++] = BPF_STX_MEM(BPF_DW, BPF_REG_1, BPF_REG_6,
 					-8 * (k % (64 - 4 * FUNC_NEST) + 1));
 	}
-	/* every jump adds 1024 steps to insn_processed, so to stay exactly
-	 * within 1m limit add MAX_TEST_INSNS - 1025 MOVs and 1 EXIT
+	/* every jump adds 1 step to insn_processed, so to stay exactly
+	 * within 1m limit add MAX_TEST_INSNS - MAX_JMP_SEQ - 1 MOVs and 1 EXIT
 	 */
-	while (i < MAX_TEST_INSNS - 1025)
+	while (i < MAX_TEST_INSNS - MAX_JMP_SEQ - 1)
 		insn[i++] = BPF_ALU32_IMM(BPF_MOV, BPF_REG_0, 42);
 	insn[i] = BPF_EXIT_INSN();
 	self->prog_len = i + 1;
-- 
2.20.1

[PATCH AUTOSEL 5.2 025/249] media: vpss: fix a potential NULL pointer dereference

[Sasha Levin]

From: Kangjie Lu <kjlu@umn.edu>

[ Upstream commit e08f0761234def47961d3252eac09ccedfe4c6a0 ]

In case ioremap fails, the fix returns -ENOMEM to avoid NULL
pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpss.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c
index 3f079ac1b080..be91b0c7d20b 100644
--- a/drivers/media/platform/davinci/vpss.c
+++ b/drivers/media/platform/davinci/vpss.c
@@ -509,6 +509,11 @@ static int __init vpss_init(void)
 		return -EBUSY;
 
 	oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4);
+	if (unlikely(!oper_cfg.vpss_regs_base2)) {
+		release_mem_region(VPSS_CLK_CTRL, 4);
+		return -ENOMEM;
+	}
+
 	writel(VPSS_CLK_CTRL_VENCCLKEN |
 		     VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 026/249] media: media_device_enum_links32: clean a reserved field

[Sasha Levin]

From: Jungo Lin <jungo.lin@mediatek.com>

[ Upstream commit f49308878d7202e07d8761238e01bd0e5fce2750 ]

In v4l2-compliance utility, test MEDIA_IOC_ENUM_ENTITIES
will check whether reserved field of media_links_enum filled
with zero.

However, for 32 bit program, the reserved field is missing
copy from kernel space to user space in media_device_enum_links32
function.

This patch adds the cleaning a reserved field logic in
media_device_enum_links32 function.

Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/media-device.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c
index 9ae481ddd975..b9bb4904bba1 100644
--- a/drivers/media/media-device.c
+++ b/drivers/media/media-device.c
@@ -494,6 +494,7 @@ static long media_device_enum_links32(struct media_device *mdev,
 {
 	struct media_links_enum links;
 	compat_uptr_t pads_ptr, links_ptr;
+	int ret;
 
 	memset(&links, 0, sizeof(links));
 
@@ -505,7 +506,13 @@ static long media_device_enum_links32(struct media_device *mdev,
 	links.pads = compat_ptr(pads_ptr);
 	links.links = compat_ptr(links_ptr);
 
-	return media_device_enum_links(mdev, &links);
+	ret = media_device_enum_links(mdev, &links);
+	if (ret)
+		return ret;
+
+	memset(ulinks->reserved, 0, sizeof(ulinks->reserved));
+
+	return 0;
 }
 
 #define MEDIA_IOC_ENUM_LINKS32		_IOWR('|', 0x02, struct media_links_enum32)
-- 
2.20.1

[PATCH AUTOSEL 5.2 027/249] ice: Gracefully handle reset failure in ice_alloc_vfs()

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit 72f9c2039859e6303550f202d6cc6b8d8af0178c ]

Currently if ice_reset_all_vfs() fails in ice_alloc_vfs() we fail to
free some resources, reset variables, and return an error value.
Fix this by adding another unroll case to free the pf->vf array, set
the pf->num_alloc_vfs to 0, and return an error code.

Without this, if ice_reset_all_vfs() fails in ice_alloc_vfs() we will
not be able to do SRIOV without hard rebooting the system because
rmmod'ing the driver does not work.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index a805cbdd69be..81ea77978355 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -1134,7 +1134,7 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
 			   GFP_KERNEL);
 	if (!vfs) {
 		ret = -ENOMEM;
-		goto err_unroll_sriov;
+		goto err_pci_disable_sriov;
 	}
 	pf->vf = vfs;
 
@@ -1154,12 +1154,19 @@ static int ice_alloc_vfs(struct ice_pf *pf, u16 num_alloc_vfs)
 	pf->num_alloc_vfs = num_alloc_vfs;
 
 	/* VF resources get allocated during reset */
-	if (!ice_reset_all_vfs(pf, true))
+	if (!ice_reset_all_vfs(pf, true)) {
+		ret = -EIO;
 		goto err_unroll_sriov;
+	}
 
 	goto err_unroll_intr;
 
 err_unroll_sriov:
+	pf->vf = NULL;
+	devm_kfree(&pf->pdev->dev, vfs);
+	vfs = NULL;
+	pf->num_alloc_vfs = 0;
+err_pci_disable_sriov:
 	pci_disable_sriov(pf->pdev);
 err_unroll_intr:
 	/* rearm interrupts here */
-- 
2.20.1

[PATCH AUTOSEL 5.2 028/249] media: venus: firmware: fix leaked of_node references

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 2c41cc0be07b5ee2f1167f41cd8a86fc5b53d82c ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/media/platform/qcom/venus/firmware.c:90:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:94:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.
drivers/media/platform/qcom/venus/firmware.c:128:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 82, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/firmware.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
index 1eba23409ff3..d3d1748a7ef6 100644
--- a/drivers/media/platform/qcom/venus/firmware.c
+++ b/drivers/media/platform/qcom/venus/firmware.c
@@ -78,11 +78,11 @@ static int venus_load_fw(struct venus_core *core, const char *fwname,
 
 	ret = of_address_to_resource(node, 0, &r);
 	if (ret)
-		return ret;
+		goto err_put_node;
 
 	ret = request_firmware(&mdt, fwname, dev);
 	if (ret < 0)
-		return ret;
+		goto err_put_node;
 
 	fw_size = qcom_mdt_get_size(mdt);
 	if (fw_size < 0) {
@@ -116,6 +116,8 @@ static int venus_load_fw(struct venus_core *core, const char *fwname,
 	memunmap(mem_va);
 err_release_fw:
 	release_firmware(mdt);
+err_put_node:
+	of_node_put(node);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 029/249] crypto: caam - avoid S/G table fetching for AEAD zero-length output

[Sasha Levin]

From: Horia Geantă <horia.geanta@nxp.com>

[ Upstream commit dcd9c76e5a183af4f793beb5141efcd260b8d09f ]

When enabling IOMMU support, the following issue becomes visible
in the AEAD zero-length case.

Even though the output sequence length is set to zero, the crypto engine
tries to prefetch 4 S/G table entries (since SGF bit is set
in SEQ OUT PTR command - which is either generated in SW in case of
caam/jr or in HW in case of caam/qi, caam/qi2).
The DMA read operation will trigger an IOMMU fault since the address in
the SEQ OUT PTR is "dummy" (set to zero / not obtained via DMA API
mapping).

1. In case of caam/jr, avoid the IOMMU fault by clearing the SGF bit
in SEQ OUT PTR command.

2. In case of caam/qi - setting address, bpid, length to zero for output
entry in the compound frame has a special meaning (cf. CAAM RM):
"Output frame = Unspecified, Input address = Y. A unspecified frame is
indicated by an unused SGT entry (an entry in which the Address, Length,
and BPID fields are all zero). SEC obtains output buffers from BMan as
prescribed by the preheader."

Since no output buffers are needed, modify the preheader by setting
(ABS = 1, ADDBUF = 0):
-"ABS = 1 means obtain the number of buffers in ADDBUF (0 or 1) from
the pool POOL ID"
-ADDBUF: "If ABS is set, ADD BUF specifies whether to allocate
a buffer or not"

3. In case of caam/qi2, since engine:
-does not support FLE[FMT]=2'b11 ("unused" entry) mentioned in DPAA2 RM
-requires output entry to be present, even if not used
the solution chosen is to leave output frame list entry zeroized.

Fixes: 763069ba49d3 ("crypto: caam - handle zero-length AEAD output")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/caam/caamalg.c     | 1 +
 drivers/crypto/caam/caamalg_qi.c  | 2 +-
 drivers/crypto/caam/caamalg_qi2.c | 9 +++++++++
 drivers/crypto/caam/qi.c          | 3 +++
 4 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index c0ece44f303b..df416e6c1468 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -1106,6 +1106,7 @@ static void init_aead_job(struct aead_request *req,
 	if (unlikely(req->src != req->dst)) {
 		if (!edesc->mapped_dst_nents) {
 			dst_dma = 0;
+			out_options = 0;
 		} else if (edesc->mapped_dst_nents == 1) {
 			dst_dma = sg_dma_address(req->dst);
 			out_options = 0;
diff --git a/drivers/crypto/caam/caamalg_qi.c b/drivers/crypto/caam/caamalg_qi.c
index d290d6b41825..116cbc81fa8d 100644
--- a/drivers/crypto/caam/caamalg_qi.c
+++ b/drivers/crypto/caam/caamalg_qi.c
@@ -1109,7 +1109,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
 			dma_to_qm_sg_one_ext(&fd_sgt[0], qm_sg_dma +
 					     (1 + !!ivsize) * sizeof(*sg_table),
 					     out_len, 0);
-	} else if (mapped_dst_nents == 1) {
+	} else if (mapped_dst_nents <= 1) {
 		dma_to_qm_sg_one(&fd_sgt[0], sg_dma_address(req->dst), out_len,
 				 0);
 	} else {
diff --git a/drivers/crypto/caam/caamalg_qi2.c b/drivers/crypto/caam/caamalg_qi2.c
index 2b2980a8a9b9..b949944c8e55 100644
--- a/drivers/crypto/caam/caamalg_qi2.c
+++ b/drivers/crypto/caam/caamalg_qi2.c
@@ -559,6 +559,14 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
 			dpaa2_fl_set_addr(out_fle, qm_sg_dma +
 					  (1 + !!ivsize) * sizeof(*sg_table));
 		}
+	} else if (!mapped_dst_nents) {
+		/*
+		 * crypto engine requires the output entry to be present when
+		 * "frame list" FD is used.
+		 * Since engine does not support FMT=2'b11 (unused entry type),
+		 * leaving out_fle zeroized is the best option.
+		 */
+		goto skip_out_fle;
 	} else if (mapped_dst_nents == 1) {
 		dpaa2_fl_set_format(out_fle, dpaa2_fl_single);
 		dpaa2_fl_set_addr(out_fle, sg_dma_address(req->dst));
@@ -570,6 +578,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
 
 	dpaa2_fl_set_len(out_fle, out_len);
 
+skip_out_fle:
 	return edesc;
 }
 
diff --git a/drivers/crypto/caam/qi.c b/drivers/crypto/caam/qi.c
index 9f08f84cca59..2d9b0485141f 100644
--- a/drivers/crypto/caam/qi.c
+++ b/drivers/crypto/caam/qi.c
@@ -18,6 +18,7 @@
 #include "desc_constr.h"
 
 #define PREHDR_RSLS_SHIFT	31
+#define PREHDR_ABS		BIT(25)
 
 /*
  * Use a reasonable backlog of frames (per CPU) as congestion threshold,
@@ -346,6 +347,7 @@ int caam_drv_ctx_update(struct caam_drv_ctx *drv_ctx, u32 *sh_desc)
 	 */
 	drv_ctx->prehdr[0] = cpu_to_caam32((1 << PREHDR_RSLS_SHIFT) |
 					   num_words);
+	drv_ctx->prehdr[1] = cpu_to_caam32(PREHDR_ABS);
 	memcpy(drv_ctx->sh_desc, sh_desc, desc_bytes(sh_desc));
 	dma_sync_single_for_device(qidev, drv_ctx->context_a,
 				   sizeof(drv_ctx->sh_desc) +
@@ -401,6 +403,7 @@ struct caam_drv_ctx *caam_drv_ctx_init(struct device *qidev,
 	 */
 	drv_ctx->prehdr[0] = cpu_to_caam32((1 << PREHDR_RSLS_SHIFT) |
 					   num_words);
+	drv_ctx->prehdr[1] = cpu_to_caam32(PREHDR_ABS);
 	memcpy(drv_ctx->sh_desc, sh_desc, desc_bytes(sh_desc));
 	size = sizeof(drv_ctx->prehdr) + sizeof(drv_ctx->sh_desc);
 	hwdesc = dma_map_single(qidev, drv_ctx->prehdr, size,
-- 
2.20.1

[PATCH AUTOSEL 5.2 030/249] net: stmmac: dwmac1000: Clear unused address entries

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 9fff81170163..54f4ffb36d60 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -206,6 +206,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
 					    GMAC_ADDR_LOW(reg));
 			reg++;
 		}
+
+		while (reg <= perfect_addr_number) {
+			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+			reg++;
+		}
 	}
 
 #ifdef FRAME_FILTER_DEBUG
-- 
2.20.1

[PATCH AUTOSEL 5.2 031/249] net: stmmac: dwmac4/5: Clear unused address entries

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]

In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.

Found out while running stmmac selftests.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 99d772517242..206170d0bf81 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -443,14 +443,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
 		 * are required
 		 */
 		value |= GMAC_PACKET_FILTER_PR;
-	} else if (!netdev_uc_empty(dev)) {
-		int reg = 1;
+	} else {
 		struct netdev_hw_addr *ha;
+		int reg = 1;
 
 		netdev_for_each_uc_addr(ha, dev) {
 			dwmac4_set_umac_addr(hw, ha->addr, reg);
 			reg++;
 		}
+
+		while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+			writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+			writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+			reg++;
+		}
 	}
 
 	writel(value, ioaddr + GMAC_PACKET_FILTER);
-- 
2.20.1

[PATCH AUTOSEL 5.2 032/249] net: stmmac: Prevent missing interrupts when running NAPI

[Sasha Levin]

From: Jose Abreu <Jose.Abreu@synopsys.com>

[ Upstream commit a976ca79e23f13bff79c14e7266cea4a0ea51e67 ]

When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.

Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 06358fe5b245..dbee9b0113e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2048,6 +2048,9 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan)
 						 &priv->xstats, chan);
 	struct stmmac_channel *ch = &priv->channel[chan];
 
+	if (status)
+		status |= handle_rx | handle_tx;
+
 	if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
 		stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
 		napi_schedule_irqoff(&ch->rx_napi);
-- 
2.20.1

[PATCH AUTOSEL 5.2 033/249] ice: Fix couple of issues in ice_vsi_release

[Sasha Levin]

From: Brett Creeley <brett.creeley@intel.com>

[ Upstream commit aa6ccf3f2d7042f94c4e91538956ce7051e7856e ]

Currently the driver is calling ice_napi_del() and then
unregister_netdev(). The call to unregister_netdev() will result in a
call to ice_stop() and then ice_vsi_close(). This is where we call
napi_disable() for all the MSI-X vectors. This flow is reversed so make
the changes to ensure napi_disable() happens prior to napi_del().

Before calling napi_del() and free_netdev() make sure
unregister_netdev() was called. This is done by making sure the
__ICE_DOWN bit is set in the vsi->state for the interested VSI.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice.h      |  1 -
 drivers/net/ethernet/intel/ice/ice_lib.c  | 24 ++++++++++++-----------
 drivers/net/ethernet/intel/ice/ice_main.c |  2 +-
 3 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
index 792e6e42030e..754c7080c3fc 100644
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -451,7 +451,6 @@ int ice_set_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
 int ice_get_rss(struct ice_vsi *vsi, u8 *seed, u8 *lut, u16 lut_size);
 void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size);
 void ice_print_link_msg(struct ice_vsi *vsi, bool isup);
-void ice_napi_del(struct ice_vsi *vsi);
 #ifdef CONFIG_DCB
 int ice_pf_ena_all_vsi(struct ice_pf *pf, bool locked);
 void ice_pf_dis_all_vsi(struct ice_pf *pf, bool locked);
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index fbf1eba0cc2a..f14fa51cc704 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2754,19 +2754,14 @@ int ice_vsi_release(struct ice_vsi *vsi)
 
 	if (vsi->type == ICE_VSI_VF)
 		vf = &pf->vf[vsi->vf_id];
-	/* do not unregister and free netdevs while driver is in the reset
-	 * recovery pending state. Since reset/rebuild happens through PF
-	 * service task workqueue, its not a good idea to unregister netdev
-	 * that is associated to the PF that is running the work queue items
-	 * currently. This is done to avoid check_flush_dependency() warning
-	 * on this wq
+	/* do not unregister while driver is in the reset recovery pending
+	 * state. Since reset/rebuild happens through PF service task workqueue,
+	 * it's not a good idea to unregister netdev that is associated to the
+	 * PF that is running the work queue items currently. This is done to
+	 * avoid check_flush_dependency() warning on this wq
 	 */
-	if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) {
-		ice_napi_del(vsi);
+	if (vsi->netdev && !ice_is_reset_in_progress(pf->state))
 		unregister_netdev(vsi->netdev);
-		free_netdev(vsi->netdev);
-		vsi->netdev = NULL;
-	}
 
 	if (test_bit(ICE_FLAG_RSS_ENA, pf->flags))
 		ice_rss_clean(vsi);
@@ -2799,6 +2794,13 @@ int ice_vsi_release(struct ice_vsi *vsi)
 	ice_rm_vsi_lan_cfg(vsi->port_info, vsi->idx);
 	ice_vsi_delete(vsi);
 	ice_vsi_free_q_vectors(vsi);
+
+	/* make sure unregister_netdev() was called by checking __ICE_DOWN */
+	if (vsi->netdev && test_bit(__ICE_DOWN, vsi->state)) {
+		free_netdev(vsi->netdev);
+		vsi->netdev = NULL;
+	}
+
 	ice_vsi_clear_rings(vsi);
 
 	ice_vsi_put_qs(vsi);
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 7843abf4d44d..dbf3d39ad8b1 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1667,7 +1667,7 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)
  * ice_napi_del - Remove NAPI handler for the VSI
  * @vsi: VSI for which NAPI handler is to be removed
  */
-void ice_napi_del(struct ice_vsi *vsi)
+static void ice_napi_del(struct ice_vsi *vsi)
 {
 	int v_idx;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 034/249] net: mvpp2: cls: Extract the RSS context when parsing the ethtool rule

[Sasha Levin]

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit c561da68038a738f30eca21456534c2d1872d13d ]

ethtool_rx_flow_rule_create takes into parameter the ethtool flow spec,
which doesn't contain the rss context id. We therefore need to extract
it ourself before parsing the ethtool rule.

The FLOW_RSS flag is only set in info->fs.flow_type, and not
info->flow_type.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
index a57d17ab91f0..fb06c0aa620a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c
@@ -1242,6 +1242,12 @@ int mvpp2_ethtool_cls_rule_ins(struct mvpp2_port *port,
 
 	input.fs = &info->fs;
 
+	/* We need to manually set the rss_ctx, since this info isn't present
+	 * in info->fs
+	 */
+	if (info->fs.flow_type & FLOW_RSS)
+		input.rss_ctx = info->rss_context;
+
 	ethtool_rule = ethtool_rx_flow_rule_create(&input);
 	if (IS_ERR(ethtool_rule)) {
 		ret = PTR_ERR(ethtool_rule);
-- 
2.20.1

[PATCH AUTOSEL 5.2 035/249] net: hns3: initialize CPU reverse mapping

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit ffab9691bcb2fe2594f4c38bfceb4d9685b93b87 ]

Allocate CPU rmap and add entry for each irq. CPU rmap is
used in aRFS to get the queue number of the rx completion
interrupts.

In additional, remove the calling of
irq_set_affinity_notifier() in hns3_nic_init_irq(), because
we have registered notifier in irq_cpu_rmap_add() for each
vector, otherwise it may cause use-after-free issue.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 77 ++++++++++++-------
 1 file changed, 48 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index f326805543a4..cd59c0cc636a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4,6 +4,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
 #include <linux/interrupt.h>
+#ifdef CONFIG_RFS_ACCEL
+#include <linux/cpu_rmap.h>
+#endif
 #include <linux/if_vlan.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
@@ -79,23 +82,6 @@ static irqreturn_t hns3_irq_handle(int irq, void *vector)
 	return IRQ_HANDLED;
 }
 
-/* This callback function is used to set affinity changes to the irq affinity
- * masks when the irq_set_affinity_notifier function is used.
- */
-static void hns3_nic_irq_affinity_notify(struct irq_affinity_notify *notify,
-					 const cpumask_t *mask)
-{
-	struct hns3_enet_tqp_vector *tqp_vectors =
-		container_of(notify, struct hns3_enet_tqp_vector,
-			     affinity_notify);
-
-	tqp_vectors->affinity_mask = *mask;
-}
-
-static void hns3_nic_irq_affinity_release(struct kref *ref)
-{
-}
-
 static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
 {
 	struct hns3_enet_tqp_vector *tqp_vectors;
@@ -107,8 +93,7 @@ static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
 		if (tqp_vectors->irq_init_flag != HNS3_VECTOR_INITED)
 			continue;
 
-		/* clear the affinity notifier and affinity mask */
-		irq_set_affinity_notifier(tqp_vectors->vector_irq, NULL);
+		/* clear the affinity mask */
 		irq_set_affinity_hint(tqp_vectors->vector_irq, NULL);
 
 		/* release the irq resource */
@@ -161,12 +146,6 @@ static int hns3_nic_init_irq(struct hns3_nic_priv *priv)
 			return ret;
 		}
 
-		tqp_vectors->affinity_notify.notify =
-					hns3_nic_irq_affinity_notify;
-		tqp_vectors->affinity_notify.release =
-					hns3_nic_irq_affinity_release;
-		irq_set_affinity_notifier(tqp_vectors->vector_irq,
-					  &tqp_vectors->affinity_notify);
 		irq_set_affinity_hint(tqp_vectors->vector_irq,
 				      &tqp_vectors->affinity_mask);
 
@@ -340,6 +319,40 @@ static void hns3_tqp_disable(struct hnae3_queue *tqp)
 	hns3_write_dev(tqp, HNS3_RING_EN_REG, rcb_reg);
 }
 
+static void hns3_free_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+	free_irq_cpu_rmap(netdev->rx_cpu_rmap);
+	netdev->rx_cpu_rmap = NULL;
+#endif
+}
+
+static int hns3_set_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+	struct hns3_enet_tqp_vector *tqp_vector;
+	int i, ret;
+
+	if (!netdev->rx_cpu_rmap) {
+		netdev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->vector_num);
+		if (!netdev->rx_cpu_rmap)
+			return -ENOMEM;
+	}
+
+	for (i = 0; i < priv->vector_num; i++) {
+		tqp_vector = &priv->tqp_vector[i];
+		ret = irq_cpu_rmap_add(netdev->rx_cpu_rmap,
+				       tqp_vector->vector_irq);
+		if (ret) {
+			hns3_free_rx_cpu_rmap(netdev);
+			return ret;
+		}
+	}
+#endif
+	return 0;
+}
+
 static int hns3_nic_net_up(struct net_device *netdev)
 {
 	struct hns3_nic_priv *priv = netdev_priv(netdev);
@@ -351,11 +364,16 @@ static int hns3_nic_net_up(struct net_device *netdev)
 	if (ret)
 		return ret;
 
+	/* the device can work without cpu rmap, only aRFS needs it */
+	ret = hns3_set_rx_cpu_rmap(netdev);
+	if (ret)
+		netdev_warn(netdev, "set rx cpu rmap fail, ret=%d!\n", ret);
+
 	/* get irq resource for all vectors */
 	ret = hns3_nic_init_irq(priv);
 	if (ret) {
 		netdev_err(netdev, "hns init irq failed! ret=%d\n", ret);
-		return ret;
+		goto free_rmap;
 	}
 
 	clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
@@ -384,7 +402,8 @@ static int hns3_nic_net_up(struct net_device *netdev)
 		hns3_vector_disable(&priv->tqp_vector[j]);
 
 	hns3_nic_uninit_irq(priv);
-
+free_rmap:
+	hns3_free_rx_cpu_rmap(netdev);
 	return ret;
 }
 
@@ -467,6 +486,8 @@ static void hns3_nic_net_down(struct net_device *netdev)
 	if (ops->stop)
 		ops->stop(priv->ae_handle);
 
+	hns3_free_rx_cpu_rmap(netdev);
+
 	/* free irq resources */
 	hns3_nic_uninit_irq(priv);
 
@@ -3331,8 +3352,6 @@ static void hns3_nic_uninit_vector_data(struct hns3_nic_priv *priv)
 		hns3_free_vector_ring_chain(tqp_vector, &vector_ring_chain);
 
 		if (tqp_vector->irq_init_flag == HNS3_VECTOR_INITED) {
-			irq_set_affinity_notifier(tqp_vector->vector_irq,
-						  NULL);
 			irq_set_affinity_hint(tqp_vector->vector_irq, NULL);
 			free_irq(tqp_vector->vector_irq, tqp_vector);
 			tqp_vector->irq_init_flag = HNS3_VECTOR_NOT_INITED;
-- 
2.20.1

[PATCH AUTOSEL 5.2 036/249] net: hns3: fix for FEC configuration

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit f438bfe9d4fe2e491505abfbf04d7c506e00d146 ]

The FEC capbility may be changed with port speed changes. Driver
needs to read the active FEC mode, and update FEC capability
when port speed changes.

Fixes: 7e6ec9148a1d ("net: hns3: add support for FEC encoding control")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index d3b1f8cb1155..4d9bcad26f06 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2508,6 +2508,9 @@ static void hclge_update_link_status(struct hclge_dev *hdev)
 
 static void hclge_update_port_capability(struct hclge_mac *mac)
 {
+	/* update fec ability by speed */
+	hclge_convert_setting_fec(mac);
+
 	/* firmware can not identify back plane type, the media type
 	 * read from configuration can help deal it
 	 */
@@ -2580,6 +2583,10 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
 		mac->speed_ability = le32_to_cpu(resp->speed_ability);
 		mac->autoneg = resp->autoneg;
 		mac->support_autoneg = resp->autoneg_ability;
+		if (!resp->active_fec)
+			mac->fec_mode = 0;
+		else
+			mac->fec_mode = BIT(resp->active_fec);
 	} else {
 		mac->speed_type = QUERY_SFP_SPEED;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 037/249] qed: Set the doorbell address correctly

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit 8366d520019f366fabd6c7a13032bdcd837e18d4 ]

In 100g mode the doorbell bar is united for both engines. Set
the correct offset in the hwfn so that the doorbell returned
for RoCE is in the affined hwfn.

Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Denis Bolotin <denis.bolotin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c  | 29 ++++++++++++++--------
 drivers/net/ethernet/qlogic/qed/qed_rdma.c |  2 +-
 2 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index fccdb06fc5c5..8c40739e0d1b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -3443,6 +3443,7 @@ static void qed_nvm_info_free(struct qed_hwfn *p_hwfn)
 static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 				 void __iomem *p_regview,
 				 void __iomem *p_doorbells,
+				 u64 db_phys_addr,
 				 enum qed_pci_personality personality)
 {
 	struct qed_dev *cdev = p_hwfn->cdev;
@@ -3451,6 +3452,7 @@ static int qed_hw_prepare_single(struct qed_hwfn *p_hwfn,
 	/* Split PCI bars evenly between hwfns */
 	p_hwfn->regview = p_regview;
 	p_hwfn->doorbells = p_doorbells;
+	p_hwfn->db_phys_addr = db_phys_addr;
 
 	if (IS_VF(p_hwfn->cdev))
 		return qed_vf_hw_prepare(p_hwfn);
@@ -3546,7 +3548,9 @@ int qed_hw_prepare(struct qed_dev *cdev,
 	/* Initialize the first hwfn - will learn number of hwfns */
 	rc = qed_hw_prepare_single(p_hwfn,
 				   cdev->regview,
-				   cdev->doorbells, personality);
+				   cdev->doorbells,
+				   cdev->db_phys_addr,
+				   personality);
 	if (rc)
 		return rc;
 
@@ -3555,22 +3559,25 @@ int qed_hw_prepare(struct qed_dev *cdev,
 	/* Initialize the rest of the hwfns */
 	if (cdev->num_hwfns > 1) {
 		void __iomem *p_regview, *p_doorbell;
-		u8 __iomem *addr;
+		u64 db_phys_addr;
+		u32 offset;
 
 		/* adjust bar offset for second engine */
-		addr = cdev->regview +
-		       qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
-				       BAR_ID_0) / 2;
-		p_regview = addr;
+		offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+					 BAR_ID_0) / 2;
+		p_regview = cdev->regview + offset;
 
-		addr = cdev->doorbells +
-		       qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
-				       BAR_ID_1) / 2;
-		p_doorbell = addr;
+		offset = qed_hw_bar_size(p_hwfn, p_hwfn->p_main_ptt,
+					 BAR_ID_1) / 2;
+
+		p_doorbell = cdev->doorbells + offset;
+
+		db_phys_addr = cdev->db_phys_addr + offset;
 
 		/* prepare second hw function */
 		rc = qed_hw_prepare_single(&cdev->hwfns[1], p_regview,
-					   p_doorbell, personality);
+					   p_doorbell, db_phys_addr,
+					   personality);
 
 		/* in case of error, need to free the previously
 		 * initiliazed hwfn 0.
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 7873d6dfd91f..13802b825d65 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -803,7 +803,7 @@ static int qed_rdma_add_user(void *rdma_cxt,
 				     dpi_start_offset +
 				     ((out_params->dpi) * p_hwfn->dpi_size));
 
-	out_params->dpi_phys_addr = p_hwfn->cdev->db_phys_addr +
+	out_params->dpi_phys_addr = p_hwfn->db_phys_addr +
 				    dpi_start_offset +
 				    ((out_params->dpi) * p_hwfn->dpi_size);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 038/249] signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit f9070dc94542093fd516ae4ccea17ef46a4362c5 ]

The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change).  The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.

Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal.  The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.

So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.

Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.

Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Fixes: cf3f89214ef6 ("pidns: add reboot_pid_ns() to handle the reboot syscall")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/pid_namespace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index f54bc7cb6c2d..6d726cef241c 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -326,7 +326,7 @@ int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd)
 	}
 
 	read_lock(&tasklist_lock);
-	force_sig(SIGKILL, pid_ns->child_reaper);
+	send_sig(SIGKILL, pid_ns->child_reaper, 1);
 	read_unlock(&tasklist_lock);
 
 	do_exit(0);
-- 
2.20.1

[PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]

The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change).  The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.

Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal.  The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.

So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.

Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.

Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Jeff Layton <jlayton@primarydata.com>
Cc: Steve French <smfrench@gmail.com>
Fixes: a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
Fixes: e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 8dd6637a3cbb..714a359c7c8d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2631,7 +2631,7 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
 
 	task = xchg(&server->tsk, NULL);
 	if (task)
-		force_sig(SIGKILL, task);
+		send_sig(SIGKILL, task, 1);
 }
 
 static struct TCP_Server_Info *
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[ronnie sahlberg]

On Tue, Jul 16, 2019 at 1:15 AM Sasha Levin <sashal@kernel.org> wrote:
>
> From: "Eric W. Biederman" <ebiederm@xmission.com>
>
> [ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]
>
> The locking in force_sig_info is not prepared to deal with a task that
> exits or execs (as sighand may change).  The is not a locking problem
> in force_sig as force_sig is only built to handle synchronous
> exceptions.
>
> Further the function force_sig_info changes the signal state if the
> signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
> delivery of the signal.  The signal SIGKILL can not be ignored and can
> not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
> delivered.
>
> So using force_sig rather than send_sig for SIGKILL is confusing
> and pointless.
>
> Because it won't impact the sending of the signal and and because
> using force_sig is wrong, replace force_sig with send_sig.

I think this patch broke the cifs module.
The issue is that the use count is now not updated properly and thus
it is no longer possible to
rmmod the module.


>
> Cc: Namjae Jeon <namjae.jeon@samsung.com>
> Cc: Jeff Layton <jlayton@primarydata.com>
> Cc: Steve French <smfrench@gmail.com>
> Fixes: a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
> Fixes: e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  fs/cifs/connect.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index 8dd6637a3cbb..714a359c7c8d 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -2631,7 +2631,7 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
>
>         task = xchg(&server->tsk, NULL);
>         if (task)
> -               force_sig(SIGKILL, task);
> +               send_sig(SIGKILL, task, 1);
>  }
>
>  static struct TCP_Server_Info *
> --
> 2.20.1
>

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Steve French]

Very easy to see what caused the regression with this global change:

mount (which launches "cifsd" thread to read the socket)
umount (which kills the "cifsd" thread)
rmmod   (rmmod now fails since "cifsd" thread is still active)

mount launches a thread to read from the socket ("cifsd")
umount is supposed to kill that thread (but with the patch
"signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
force_sig" that no longer works).  So the regression is that after
unmount you still see the "cifsd" thread, and the reason that cifsd
thread is still around is that that patch no longer force kills the
process (see line 2652 of fs/cifs/connect.c) which regresses module
removal.

-               force_sig(SIGKILL, task);
+               send_sig(SIGKILL, task, 1);

The comment in the changeset indicates "The signal SIGKILL can not be
ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
being ignored.

If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
is removed and no longer possible - how do we kill a helper process
...

On Tue, Jul 23, 2019 at 6:20 PM ronnie sahlberg
<ronniesahlberg@gmail.com> wrote:
>
> On Tue, Jul 16, 2019 at 1:15 AM Sasha Levin <sashal@kernel.org> wrote:
> >
> > From: "Eric W. Biederman" <ebiederm@xmission.com>
> >
> > [ Upstream commit 72abe3bcf0911d69b46c1e8bdb5612675e0ac42c ]
> >
> > The locking in force_sig_info is not prepared to deal with a task that
> > exits or execs (as sighand may change).  The is not a locking problem
> > in force_sig as force_sig is only built to handle synchronous
> > exceptions.
> >
> > Further the function force_sig_info changes the signal state if the
> > signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
> > delivery of the signal.  The signal SIGKILL can not be ignored and can
> > not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
> > delivered.
> >
> > So using force_sig rather than send_sig for SIGKILL is confusing
> > and pointless.
> >
> > Because it won't impact the sending of the signal and and because
> > using force_sig is wrong, replace force_sig with send_sig.
>
> I think this patch broke the cifs module.
> The issue is that the use count is now not updated properly and thus
> it is no longer possible to
> rmmod the module.
>
>
> >
> > Cc: Namjae Jeon <namjae.jeon@samsung.com>
> > Cc: Jeff Layton <jlayton@primarydata.com>
> > Cc: Steve French <smfrench@gmail.com>
> > Fixes: a5c3e1c725af ("Revert "cifs: No need to send SIGKILL to demux_thread during umount"")
> > Fixes: e7ddee9037e7 ("cifs: disable sharing session and tcon and add new TCP sharing code")
> > Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
> > Signed-off-by: Sasha Levin <sashal@kernel.org>
> > ---
> >  fs/cifs/connect.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > index 8dd6637a3cbb..714a359c7c8d 100644
> > --- a/fs/cifs/connect.c
> > +++ b/fs/cifs/connect.c
> > @@ -2631,7 +2631,7 @@ cifs_put_tcp_session(struct TCP_Server_Info *server, int from_reconnect)
> >
> >         task = xchg(&server->tsk, NULL);
> >         if (task)
> > -               force_sig(SIGKILL, task);
> > +               send_sig(SIGKILL, task, 1);
> >  }
> >
> >  static struct TCP_Server_Info *
> > --
> > 2.20.1
> >



-- 
Thanks,

Steve

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Eric W. Biederman]

Steve French <smfrench@gmail.com> writes:

> Very easy to see what caused the regression with this global change:
>
> mount (which launches "cifsd" thread to read the socket)
> umount (which kills the "cifsd" thread)
> rmmod   (rmmod now fails since "cifsd" thread is still active)
>
> mount launches a thread to read from the socket ("cifsd")
> umount is supposed to kill that thread (but with the patch
> "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
> force_sig" that no longer works).  So the regression is that after
> unmount you still see the "cifsd" thread, and the reason that cifsd
> thread is still around is that that patch no longer force kills the
> process (see line 2652 of fs/cifs/connect.c) which regresses module
> removal.
>
> -               force_sig(SIGKILL, task);
> +               send_sig(SIGKILL, task, 1);
>
> The comment in the changeset indicates "The signal SIGKILL can not be
> ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
> being ignored.
>
> If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
> is removed and no longer possible - how do we kill a helper process
> ...

I think I see what is happening.  It looks like as well as misuinsg
force_sig, cifs is also violating the invariant that keeps SIGKILL out
of the blocked signal set.

For that force_sig will act differently.  I did not consider it because
that is never supposed to happen.

Can someone test this code below and confirm the issue goes away?

diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 5d6d44bfe10a..2a782ebc7b65 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
 	 */
 
 	sigfillset(&mask);
+	sigdelset(&mask, SIGKILL);
 	sigprocmask(SIG_BLOCK, &mask, &oldmask);
 
 	/* Generate a rfc1002 marker for SMB2+ */


Eric

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Steve French]

On Tue, Jul 23, 2019 at 8:32 PM Eric W. Biederman <ebiederm@xmission.com> wrote:
>
> Steve French <smfrench@gmail.com> writes:
>
> > Very easy to see what caused the regression with this global change:
> >
> > mount (which launches "cifsd" thread to read the socket)
> > umount (which kills the "cifsd" thread)
> > rmmod   (rmmod now fails since "cifsd" thread is still active)
> >
> > mount launches a thread to read from the socket ("cifsd")
> > umount is supposed to kill that thread (but with the patch
> > "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
> > force_sig" that no longer works).  So the regression is that after
> > unmount you still see the "cifsd" thread, and the reason that cifsd
> > thread is still around is that that patch no longer force kills the
> > process (see line 2652 of fs/cifs/connect.c) which regresses module
> > removal.
> >
> > -               force_sig(SIGKILL, task);
> > +               send_sig(SIGKILL, task, 1);
> >
> > The comment in the changeset indicates "The signal SIGKILL can not be
> > ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
> > being ignored.
> >
> > If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
> > is removed and no longer possible - how do we kill a helper process
> > ...
>
> I think I see what is happening.  It looks like as well as misuinsg
> force_sig, cifs is also violating the invariant that keeps SIGKILL out
> of the blocked signal set.
>
> For that force_sig will act differently.  I did not consider it because
> that is never supposed to happen.
>
> Can someone test this code below and confirm the issue goes away?
>
> diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
> index 5d6d44bfe10a..2a782ebc7b65 100644
> --- a/fs/cifs/transport.c
> +++ b/fs/cifs/transport.c
> @@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
>          */
>
>         sigfillset(&mask);
> +       sigdelset(&mask, SIGKILL);
>         sigprocmask(SIG_BLOCK, &mask, &oldmask);
>
>         /* Generate a rfc1002 marker for SMB2+ */
>
>
> Eric

I just tried your suggestion and it didn't work.   I also tried doing
a similar thing on the thread we are trying to kills ("cifsd" - ie
which is blocked in the function cifs_demultiplex_thread waiting to
read from the socket)
# git diff -a
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a4830ced0f98..b73062520a17 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
        struct task_struct *task_to_wake = NULL;
        struct mid_q_entry *mids[MAX_COMPOUND];
        char *bufs[MAX_COMPOUND];
+       sigset_t mask;

        current->flags |= PF_MEMALLOC;
        cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
@@ -1113,6 +1114,8 @@ cifs_demultiplex_thread(void *p)
                mempool_resize(cifs_req_poolp, length + cifs_min_rcv);

        set_freezable();
+       sigfillset(&mask);
+       sigdelset(&mask, SIGKILL);
        while (server->tcpStatus != CifsExiting) {
                if (try_to_freeze())
                        continue;


That also didn't work.     The only thing I have been able to find
which worked was:

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a4830ced0f98..e74f04163fc9 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
                mempool_resize(cifs_req_poolp, length + cifs_min_rcv);

        set_freezable();
+      allow_signal(SIGKILL);
        while (server->tcpStatus != CifsExiting) {
                if (try_to_freeze())
                        continue;


That fixes the problem ... but ... as Ronnie and others have noted it
would allow a userspace process to make the mount unusable (all you
would have to do would be to do a kill -9 of the "cifsd" process from
some userspace process like bash and the mount would be unusable - so
this sounds dangerous.

Is there an alternative that, in the process doing the unmount in
kernel, would allow us to do the equivalent of:
      "allow_signal(SIGKILL, <the id of the cifsd process>"
In otherwords, to minimize the risk of some userspace process killing
cifsd, could we delay enabling allow_signal(SIGKILL) till the unmount
begins by doing it for a different process (have the unmount process
enable signals for the cifsd process).   Otherwise is there a way to
force kill a process from the kernel as we used to do - without
running the risk of a user space process killing cifsd (which is bad).

-- 
Thanks,

Steve

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Steve French]

Pavel noticed I missed a line from the attempt to do a similar patch
to Eric's suggestion
(it still didn't work though - although "allow_signal" does albeit is
possibly dangerous as user space can kill cifsd)

# git diff -a
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a4830ced0f98..8758dff18c15 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
        struct task_struct *task_to_wake = NULL;
        struct mid_q_entry *mids[MAX_COMPOUND];
        char *bufs[MAX_COMPOUND];
+       sigset_t mask, oldmask;

        current->flags |= PF_MEMALLOC;
        cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
@@ -1113,6 +1114,9 @@ cifs_demultiplex_thread(void *p)
                mempool_resize(cifs_req_poolp, length + cifs_min_rcv);

        set_freezable();
+       sigfillset(&mask);
+       sigdelset(&mask, SIGKILL);
+       sigprocmask(SIG_BLOCK, &mask, &oldmask);
        while (server->tcpStatus != CifsExiting) {
                if (try_to_freeze())
                        continue;

On Tue, Jul 23, 2019 at 9:02 PM Steve French <smfrench@gmail.com> wrote:
>
> On Tue, Jul 23, 2019 at 8:32 PM Eric W. Biederman <ebiederm@xmission.com> wrote:
> >
> > Steve French <smfrench@gmail.com> writes:
> >
> > > Very easy to see what caused the regression with this global change:
> > >
> > > mount (which launches "cifsd" thread to read the socket)
> > > umount (which kills the "cifsd" thread)
> > > rmmod   (rmmod now fails since "cifsd" thread is still active)
> > >
> > > mount launches a thread to read from the socket ("cifsd")
> > > umount is supposed to kill that thread (but with the patch
> > > "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
> > > force_sig" that no longer works).  So the regression is that after
> > > unmount you still see the "cifsd" thread, and the reason that cifsd
> > > thread is still around is that that patch no longer force kills the
> > > process (see line 2652 of fs/cifs/connect.c) which regresses module
> > > removal.
> > >
> > > -               force_sig(SIGKILL, task);
> > > +               send_sig(SIGKILL, task, 1);
> > >
> > > The comment in the changeset indicates "The signal SIGKILL can not be
> > > ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
> > > being ignored.
> > >
> > > If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
> > > is removed and no longer possible - how do we kill a helper process
> > > ...
> >
> > I think I see what is happening.  It looks like as well as misuinsg
> > force_sig, cifs is also violating the invariant that keeps SIGKILL out
> > of the blocked signal set.
> >
> > For that force_sig will act differently.  I did not consider it because
> > that is never supposed to happen.
> >
> > Can someone test this code below and confirm the issue goes away?
> >
> > diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
> > index 5d6d44bfe10a..2a782ebc7b65 100644
> > --- a/fs/cifs/transport.c
> > +++ b/fs/cifs/transport.c
> > @@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
> >          */
> >
> >         sigfillset(&mask);
> > +       sigdelset(&mask, SIGKILL);
> >         sigprocmask(SIG_BLOCK, &mask, &oldmask);
> >
> >         /* Generate a rfc1002 marker for SMB2+ */
> >
> >
> > Eric
>
> I just tried your suggestion and it didn't work.   I also tried doing
> a similar thing on the thread we are trying to kills ("cifsd" - ie
> which is blocked in the function cifs_demultiplex_thread waiting to
> read from the socket)
> # git diff -a
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index a4830ced0f98..b73062520a17 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
>         struct task_struct *task_to_wake = NULL;
>         struct mid_q_entry *mids[MAX_COMPOUND];
>         char *bufs[MAX_COMPOUND];
> +       sigset_t mask;
>
>         current->flags |= PF_MEMALLOC;
>         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
> @@ -1113,6 +1114,8 @@ cifs_demultiplex_thread(void *p)
>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>
>         set_freezable();
> +       sigfillset(&mask);
> +       sigdelset(&mask, SIGKILL);
>         while (server->tcpStatus != CifsExiting) {
>                 if (try_to_freeze())
>                         continue;
>
>
> That also didn't work.     The only thing I have been able to find
> which worked was:
>
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index a4830ced0f98..e74f04163fc9 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>
>         set_freezable();
> +      allow_signal(SIGKILL);
>         while (server->tcpStatus != CifsExiting) {
>                 if (try_to_freeze())
>                         continue;
>
>
> That fixes the problem ... but ... as Ronnie and others have noted it
> would allow a userspace process to make the mount unusable (all you
> would have to do would be to do a kill -9 of the "cifsd" process from
> some userspace process like bash and the mount would be unusable - so
> this sounds dangerous.
>
> Is there an alternative that, in the process doing the unmount in
> kernel, would allow us to do the equivalent of:
>       "allow_signal(SIGKILL, <the id of the cifsd process>"
> In otherwords, to minimize the risk of some userspace process killing
> cifsd, could we delay enabling allow_signal(SIGKILL) till the unmount
> begins by doing it for a different process (have the unmount process
> enable signals for the cifsd process).   Otherwise is there a way to
> force kill a process from the kernel as we used to do - without
> running the risk of a user space process killing cifsd (which is bad).
>
> --
> Thanks,
>
> Steve



-- 
Thanks,

Steve

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Steve French]

I did some additional testing and it looks like the "allow_signal"
change may be safe enough

# git diff -a
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a4830ced0f98..a15a6e738eb5 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
                mempool_resize(cifs_req_poolp, length + cifs_min_rcv);

        set_freezable();
+       allow_signal(SIGKILL);
        while (server->tcpStatus != CifsExiting) {
                if (try_to_freeze())
                        continue;

See below:
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# insmod ./cifs.ko
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# mount -t cifs
//localhost/scratch /mnt -o username=sfrench
Password for sfrench@//localhost/scratch:  ************
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
 5176 ?        00:00:00 cifsd
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# kill -9 5176
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ls /mnt
0444  dir0750  dir0754  newfile
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# umount /mnt
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# rmmod cifs

On Tue, Jul 23, 2019 at 9:19 PM Steve French <smfrench@gmail.com> wrote:
>
> Pavel noticed I missed a line from the attempt to do a similar patch
> to Eric's suggestion
> (it still didn't work though - although "allow_signal" does albeit is
> possibly dangerous as user space can kill cifsd)
>
> # git diff -a
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index a4830ced0f98..8758dff18c15 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
>         struct task_struct *task_to_wake = NULL;
>         struct mid_q_entry *mids[MAX_COMPOUND];
>         char *bufs[MAX_COMPOUND];
> +       sigset_t mask, oldmask;
>
>         current->flags |= PF_MEMALLOC;
>         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
> @@ -1113,6 +1114,9 @@ cifs_demultiplex_thread(void *p)
>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>
>         set_freezable();
> +       sigfillset(&mask);
> +       sigdelset(&mask, SIGKILL);
> +       sigprocmask(SIG_BLOCK, &mask, &oldmask);
>         while (server->tcpStatus != CifsExiting) {
>                 if (try_to_freeze())
>                         continue;
>
> On Tue, Jul 23, 2019 at 9:02 PM Steve French <smfrench@gmail.com> wrote:
> >
> > On Tue, Jul 23, 2019 at 8:32 PM Eric W. Biederman <ebiederm@xmission.com> wrote:
> > >
> > > Steve French <smfrench@gmail.com> writes:
> > >
> > > > Very easy to see what caused the regression with this global change:
> > > >
> > > > mount (which launches "cifsd" thread to read the socket)
> > > > umount (which kills the "cifsd" thread)
> > > > rmmod   (rmmod now fails since "cifsd" thread is still active)
> > > >
> > > > mount launches a thread to read from the socket ("cifsd")
> > > > umount is supposed to kill that thread (but with the patch
> > > > "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
> > > > force_sig" that no longer works).  So the regression is that after
> > > > unmount you still see the "cifsd" thread, and the reason that cifsd
> > > > thread is still around is that that patch no longer force kills the
> > > > process (see line 2652 of fs/cifs/connect.c) which regresses module
> > > > removal.
> > > >
> > > > -               force_sig(SIGKILL, task);
> > > > +               send_sig(SIGKILL, task, 1);
> > > >
> > > > The comment in the changeset indicates "The signal SIGKILL can not be
> > > > ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
> > > > being ignored.
> > > >
> > > > If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
> > > > is removed and no longer possible - how do we kill a helper process
> > > > ...
> > >
> > > I think I see what is happening.  It looks like as well as misuinsg
> > > force_sig, cifs is also violating the invariant that keeps SIGKILL out
> > > of the blocked signal set.
> > >
> > > For that force_sig will act differently.  I did not consider it because
> > > that is never supposed to happen.
> > >
> > > Can someone test this code below and confirm the issue goes away?
> > >
> > > diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
> > > index 5d6d44bfe10a..2a782ebc7b65 100644
> > > --- a/fs/cifs/transport.c
> > > +++ b/fs/cifs/transport.c
> > > @@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
> > >          */
> > >
> > >         sigfillset(&mask);
> > > +       sigdelset(&mask, SIGKILL);
> > >         sigprocmask(SIG_BLOCK, &mask, &oldmask);
> > >
> > >         /* Generate a rfc1002 marker for SMB2+ */
> > >
> > >
> > > Eric
> >
> > I just tried your suggestion and it didn't work.   I also tried doing
> > a similar thing on the thread we are trying to kills ("cifsd" - ie
> > which is blocked in the function cifs_demultiplex_thread waiting to
> > read from the socket)
> > # git diff -a
> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > index a4830ced0f98..b73062520a17 100644
> > --- a/fs/cifs/connect.c
> > +++ b/fs/cifs/connect.c
> > @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
> >         struct task_struct *task_to_wake = NULL;
> >         struct mid_q_entry *mids[MAX_COMPOUND];
> >         char *bufs[MAX_COMPOUND];
> > +       sigset_t mask;
> >
> >         current->flags |= PF_MEMALLOC;
> >         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
> > @@ -1113,6 +1114,8 @@ cifs_demultiplex_thread(void *p)
> >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
> >
> >         set_freezable();
> > +       sigfillset(&mask);
> > +       sigdelset(&mask, SIGKILL);
> >         while (server->tcpStatus != CifsExiting) {
> >                 if (try_to_freeze())
> >                         continue;
> >
> >
> > That also didn't work.     The only thing I have been able to find
> > which worked was:
> >
> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > index a4830ced0f98..e74f04163fc9 100644
> > --- a/fs/cifs/connect.c
> > +++ b/fs/cifs/connect.c
> > @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
> >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
> >
> >         set_freezable();
> > +      allow_signal(SIGKILL);
> >         while (server->tcpStatus != CifsExiting) {
> >                 if (try_to_freeze())
> >                         continue;
> >
> >
> > That fixes the problem ... but ... as Ronnie and others have noted it
> > would allow a userspace process to make the mount unusable (all you
> > would have to do would be to do a kill -9 of the "cifsd" process from
> > some userspace process like bash and the mount would be unusable - so
> > this sounds dangerous.
> >
> > Is there an alternative that, in the process doing the unmount in
> > kernel, would allow us to do the equivalent of:
> >       "allow_signal(SIGKILL, <the id of the cifsd process>"
> > In otherwords, to minimize the risk of some userspace process killing
> > cifsd, could we delay enabling allow_signal(SIGKILL) till the unmount
> > begins by doing it for a different process (have the unmount process
> > enable signals for the cifsd process).   Otherwise is there a way to
> > force kill a process from the kernel as we used to do - without
> > running the risk of a user space process killing cifsd (which is bad).
> >
> > --
> > Thanks,
> >
> > Steve
>
>
>
> --
> Thanks,
>
> Steve



-- 
Thanks,

Steve

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Steve French]

[-- Attachment #1: Type: text/plain, Size: 8076 bytes --]

Patch attached - tests out ok.


On Tue, Jul 23, 2019 at 9:28 PM Steve French <smfrench@gmail.com> wrote:
>
> I did some additional testing and it looks like the "allow_signal"
> change may be safe enough
>
> # git diff -a
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index a4830ced0f98..a15a6e738eb5 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>
>         set_freezable();
> +       allow_signal(SIGKILL);
>         while (server->tcpStatus != CifsExiting) {
>                 if (try_to_freeze())
>                         continue;
>
> See below:
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# insmod ./cifs.ko
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# mount -t cifs
> //localhost/scratch /mnt -o username=sfrench
> Password for sfrench@//localhost/scratch:  ************
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
>  5176 ?        00:00:00 cifsd
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# kill -9 5176
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ls /mnt
> 0444  dir0750  dir0754  newfile
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# umount /mnt
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# rmmod cifs
>
> On Tue, Jul 23, 2019 at 9:19 PM Steve French <smfrench@gmail.com> wrote:
> >
> > Pavel noticed I missed a line from the attempt to do a similar patch
> > to Eric's suggestion
> > (it still didn't work though - although "allow_signal" does albeit is
> > possibly dangerous as user space can kill cifsd)
> >
> > # git diff -a
> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > index a4830ced0f98..8758dff18c15 100644
> > --- a/fs/cifs/connect.c
> > +++ b/fs/cifs/connect.c
> > @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
> >         struct task_struct *task_to_wake = NULL;
> >         struct mid_q_entry *mids[MAX_COMPOUND];
> >         char *bufs[MAX_COMPOUND];
> > +       sigset_t mask, oldmask;
> >
> >         current->flags |= PF_MEMALLOC;
> >         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
> > @@ -1113,6 +1114,9 @@ cifs_demultiplex_thread(void *p)
> >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
> >
> >         set_freezable();
> > +       sigfillset(&mask);
> > +       sigdelset(&mask, SIGKILL);
> > +       sigprocmask(SIG_BLOCK, &mask, &oldmask);
> >         while (server->tcpStatus != CifsExiting) {
> >                 if (try_to_freeze())
> >                         continue;
> >
> > On Tue, Jul 23, 2019 at 9:02 PM Steve French <smfrench@gmail.com> wrote:
> > >
> > > On Tue, Jul 23, 2019 at 8:32 PM Eric W. Biederman <ebiederm@xmission.com> wrote:
> > > >
> > > > Steve French <smfrench@gmail.com> writes:
> > > >
> > > > > Very easy to see what caused the regression with this global change:
> > > > >
> > > > > mount (which launches "cifsd" thread to read the socket)
> > > > > umount (which kills the "cifsd" thread)
> > > > > rmmod   (rmmod now fails since "cifsd" thread is still active)
> > > > >
> > > > > mount launches a thread to read from the socket ("cifsd")
> > > > > umount is supposed to kill that thread (but with the patch
> > > > > "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
> > > > > force_sig" that no longer works).  So the regression is that after
> > > > > unmount you still see the "cifsd" thread, and the reason that cifsd
> > > > > thread is still around is that that patch no longer force kills the
> > > > > process (see line 2652 of fs/cifs/connect.c) which regresses module
> > > > > removal.
> > > > >
> > > > > -               force_sig(SIGKILL, task);
> > > > > +               send_sig(SIGKILL, task, 1);
> > > > >
> > > > > The comment in the changeset indicates "The signal SIGKILL can not be
> > > > > ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
> > > > > being ignored.
> > > > >
> > > > > If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
> > > > > is removed and no longer possible - how do we kill a helper process
> > > > > ...
> > > >
> > > > I think I see what is happening.  It looks like as well as misuinsg
> > > > force_sig, cifs is also violating the invariant that keeps SIGKILL out
> > > > of the blocked signal set.
> > > >
> > > > For that force_sig will act differently.  I did not consider it because
> > > > that is never supposed to happen.
> > > >
> > > > Can someone test this code below and confirm the issue goes away?
> > > >
> > > > diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
> > > > index 5d6d44bfe10a..2a782ebc7b65 100644
> > > > --- a/fs/cifs/transport.c
> > > > +++ b/fs/cifs/transport.c
> > > > @@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
> > > >          */
> > > >
> > > >         sigfillset(&mask);
> > > > +       sigdelset(&mask, SIGKILL);
> > > >         sigprocmask(SIG_BLOCK, &mask, &oldmask);
> > > >
> > > >         /* Generate a rfc1002 marker for SMB2+ */
> > > >
> > > >
> > > > Eric
> > >
> > > I just tried your suggestion and it didn't work.   I also tried doing
> > > a similar thing on the thread we are trying to kills ("cifsd" - ie
> > > which is blocked in the function cifs_demultiplex_thread waiting to
> > > read from the socket)
> > > # git diff -a
> > > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > > index a4830ced0f98..b73062520a17 100644
> > > --- a/fs/cifs/connect.c
> > > +++ b/fs/cifs/connect.c
> > > @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
> > >         struct task_struct *task_to_wake = NULL;
> > >         struct mid_q_entry *mids[MAX_COMPOUND];
> > >         char *bufs[MAX_COMPOUND];
> > > +       sigset_t mask;
> > >
> > >         current->flags |= PF_MEMALLOC;
> > >         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
> > > @@ -1113,6 +1114,8 @@ cifs_demultiplex_thread(void *p)
> > >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
> > >
> > >         set_freezable();
> > > +       sigfillset(&mask);
> > > +       sigdelset(&mask, SIGKILL);
> > >         while (server->tcpStatus != CifsExiting) {
> > >                 if (try_to_freeze())
> > >                         continue;
> > >
> > >
> > > That also didn't work.     The only thing I have been able to find
> > > which worked was:
> > >
> > > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> > > index a4830ced0f98..e74f04163fc9 100644
> > > --- a/fs/cifs/connect.c
> > > +++ b/fs/cifs/connect.c
> > > @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
> > >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
> > >
> > >         set_freezable();
> > > +      allow_signal(SIGKILL);
> > >         while (server->tcpStatus != CifsExiting) {
> > >                 if (try_to_freeze())
> > >                         continue;
> > >
> > >
> > > That fixes the problem ... but ... as Ronnie and others have noted it
> > > would allow a userspace process to make the mount unusable (all you
> > > would have to do would be to do a kill -9 of the "cifsd" process from
> > > some userspace process like bash and the mount would be unusable - so
> > > this sounds dangerous.
> > >
> > > Is there an alternative that, in the process doing the unmount in
> > > kernel, would allow us to do the equivalent of:
> > >       "allow_signal(SIGKILL, <the id of the cifsd process>"
> > > In otherwords, to minimize the risk of some userspace process killing
> > > cifsd, could we delay enabling allow_signal(SIGKILL) till the unmount
> > > begins by doing it for a different process (have the unmount process
> > > enable signals for the cifsd process).   Otherwise is there a way to
> > > force kill a process from the kernel as we used to do - without
> > > running the risk of a user space process killing cifsd (which is bad).
> > >
> > > --
> > > Thanks,
> > >
> > > Steve
> >
> >
> >
> > --
> > Thanks,
> >
> > Steve
>
>
>
> --
> Thanks,
>
> Steve



-- 
Thanks,

Steve

[-- Attachment #2: 0001-cifs-fix-rmmod-regression-in-cifs.ko-caused-by-force.patch --]
[-- Type: text/x-patch, Size: 1103 bytes --]

From 6966af5a177be7fdab29cd6e871c2850c078385c Mon Sep 17 00:00:00 2001
From: Steve French <stfrench@microsoft.com>
Date: Tue, 23 Jul 2019 22:14:29 -0500
Subject: [PATCH] cifs: fix rmmod regression in cifs.ko caused by force_sig
 changes

Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")

The global change from force_sig caused module unloading of cifs.ko
to fail (since the cifsd process could not be killed, "rmmod cifs"
now would always fail)

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
---
 fs/cifs/connect.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index a4830ced0f98..a15a6e738eb5 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
 		mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
 
 	set_freezable();
+	allow_signal(SIGKILL);
 	while (server->tcpStatus != CifsExiting) {
 		if (try_to_freeze())
 			continue;
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 039/249] signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig

[Eric W. Biederman]

Steve French <smfrench@gmail.com> writes:

> I did some additional testing and it looks like the "allow_signal"
> change may be safe enough
>
> # git diff -a
> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
> index a4830ced0f98..a15a6e738eb5 100644
> --- a/fs/cifs/connect.c
> +++ b/fs/cifs/connect.c
> @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>
>         set_freezable();
> +       allow_signal(SIGKILL);
>         while (server->tcpStatus != CifsExiting) {
>                 if (try_to_freeze())
>                         continue;
>
> See below:
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# insmod ./cifs.ko
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# mount -t cifs
> //localhost/scratch /mnt -o username=sfrench
> Password for sfrench@//localhost/scratch:  ************
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
>  5176 ?        00:00:00 cifsd
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# kill -9 5176
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ls /mnt
> 0444  dir0750  dir0754  newfile
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# umount /mnt
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# ps -A | grep cifsd
> root@smf-Thinkpad-P51:~/cifs-2.6/fs/cifs# rmmod cifs

Yes.  I just discovered that kthreadd calls a function named
ignore_signals that set all signals to SIG_IGN.  Which becomes
the default for all kernel threads.  So something like allow_signal
to change the signal handler is necessary.  The blocking of SIGKILL is
also concerning but apparently that is not the issue here.

Ideally I think cifs should use kthread_stop, instead of signals for
this purpose.  The logic is convoluted enough that reading through the
cifs code quickly I don't see how sending SIGKILL to the daemon causes
it to stop.

Eric


> On Tue, Jul 23, 2019 at 9:19 PM Steve French <smfrench@gmail.com> wrote:
>>
>> Pavel noticed I missed a line from the attempt to do a similar patch
>> to Eric's suggestion
>> (it still didn't work though - although "allow_signal" does albeit is
>> possibly dangerous as user space can kill cifsd)
>>
>> # git diff -a
>> diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>> index a4830ced0f98..8758dff18c15 100644
>> --- a/fs/cifs/connect.c
>> +++ b/fs/cifs/connect.c
>> @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
>>         struct task_struct *task_to_wake = NULL;
>>         struct mid_q_entry *mids[MAX_COMPOUND];
>>         char *bufs[MAX_COMPOUND];
>> +       sigset_t mask, oldmask;
>>
>>         current->flags |= PF_MEMALLOC;
>>         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
>> @@ -1113,6 +1114,9 @@ cifs_demultiplex_thread(void *p)
>>                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>>
>>         set_freezable();
>> +       sigfillset(&mask);
>> +       sigdelset(&mask, SIGKILL);
>> +       sigprocmask(SIG_BLOCK, &mask, &oldmask);
>>         while (server->tcpStatus != CifsExiting) {
>>                 if (try_to_freeze())
>>                         continue;
>>
>> On Tue, Jul 23, 2019 at 9:02 PM Steve French <smfrench@gmail.com> wrote:
>> >
>> > On Tue, Jul 23, 2019 at 8:32 PM Eric W. Biederman <ebiederm@xmission.com> wrote:
>> > >
>> > > Steve French <smfrench@gmail.com> writes:
>> > >
>> > > > Very easy to see what caused the regression with this global change:
>> > > >
>> > > > mount (which launches "cifsd" thread to read the socket)
>> > > > umount (which kills the "cifsd" thread)
>> > > > rmmod   (rmmod now fails since "cifsd" thread is still active)
>> > > >
>> > > > mount launches a thread to read from the socket ("cifsd")
>> > > > umount is supposed to kill that thread (but with the patch
>> > > > "signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of
>> > > > force_sig" that no longer works).  So the regression is that after
>> > > > unmount you still see the "cifsd" thread, and the reason that cifsd
>> > > > thread is still around is that that patch no longer force kills the
>> > > > process (see line 2652 of fs/cifs/connect.c) which regresses module
>> > > > removal.
>> > > >
>> > > > -               force_sig(SIGKILL, task);
>> > > > +               send_sig(SIGKILL, task, 1);
>> > > >
>> > > > The comment in the changeset indicates "The signal SIGKILL can not be
>> > > > ignored" but obviously it can be ignored - at least on 5.3-rc1 it is
>> > > > being ignored.
>> > > >
>> > > > If send_sig(SIGKILL ...) doesn't work and if force_sig(SIGKILL, task)
>> > > > is removed and no longer possible - how do we kill a helper process
>> > > > ...
>> > >
>> > > I think I see what is happening.  It looks like as well as misuinsg
>> > > force_sig, cifs is also violating the invariant that keeps SIGKILL out
>> > > of the blocked signal set.
>> > >
>> > > For that force_sig will act differently.  I did not consider it because
>> > > that is never supposed to happen.
>> > >
>> > > Can someone test this code below and confirm the issue goes away?
>> > >
>> > > diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
>> > > index 5d6d44bfe10a..2a782ebc7b65 100644
>> > > --- a/fs/cifs/transport.c
>> > > +++ b/fs/cifs/transport.c
>> > > @@ -347,6 +347,7 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
>> > >          */
>> > >
>> > >         sigfillset(&mask);
>> > > +       sigdelset(&mask, SIGKILL);
>> > >         sigprocmask(SIG_BLOCK, &mask, &oldmask);
>> > >
>> > >         /* Generate a rfc1002 marker for SMB2+ */
>> > >
>> > >
>> > > Eric
>> >
>> > I just tried your suggestion and it didn't work.   I also tried doing
>> > a similar thing on the thread we are trying to kills ("cifsd" - ie
>> > which is blocked in the function cifs_demultiplex_thread waiting to
>> > read from the socket)
>> > # git diff -a
>> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>> > index a4830ced0f98..b73062520a17 100644
>> > --- a/fs/cifs/connect.c
>> > +++ b/fs/cifs/connect.c
>> > @@ -1104,6 +1104,7 @@ cifs_demultiplex_thread(void *p)
>> >         struct task_struct *task_to_wake = NULL;
>> >         struct mid_q_entry *mids[MAX_COMPOUND];
>> >         char *bufs[MAX_COMPOUND];
>> > +       sigset_t mask;
>> >
>> >         current->flags |= PF_MEMALLOC;
>> >         cifs_dbg(FYI, "Demultiplex PID: %d\n", task_pid_nr(current));
>> > @@ -1113,6 +1114,8 @@ cifs_demultiplex_thread(void *p)
>> >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>> >
>> >         set_freezable();
>> > +       sigfillset(&mask);
>> > +       sigdelset(&mask, SIGKILL);
>> >         while (server->tcpStatus != CifsExiting) {
>> >                 if (try_to_freeze())
>> >                         continue;
>> >
>> >
>> > That also didn't work.     The only thing I have been able to find
>> > which worked was:
>> >
>> > diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
>> > index a4830ced0f98..e74f04163fc9 100644
>> > --- a/fs/cifs/connect.c
>> > +++ b/fs/cifs/connect.c
>> > @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p)
>> >                 mempool_resize(cifs_req_poolp, length + cifs_min_rcv);
>> >
>> >         set_freezable();
>> > +      allow_signal(SIGKILL);
>> >         while (server->tcpStatus != CifsExiting) {
>> >                 if (try_to_freeze())
>> >                         continue;
>> >
>> >
>> > That fixes the problem ... but ... as Ronnie and others have noted it
>> > would allow a userspace process to make the mount unusable (all you
>> > would have to do would be to do a kill -9 of the "cifsd" process from
>> > some userspace process like bash and the mount would be unusable - so
>> > this sounds dangerous.
>> >
>> > Is there an alternative that, in the process doing the unmount in
>> > kernel, would allow us to do the equivalent of:
>> >       "allow_signal(SIGKILL, <the id of the cifsd process>"
>> > In otherwords, to minimize the risk of some userspace process killing
>> > cifsd, could we delay enabling allow_signal(SIGKILL) till the unmount
>> > begins by doing it for a different process (have the unmount process
>> > enable signals for the cifsd process).   Otherwise is there a way to
>> > force kill a process from the kernel as we used to do - without
>> > running the risk of a user space process killing cifsd (which is bad).
>> >
>> > --
>> > Thanks,
>> >
>> > Steve
>>
>>
>>
>> --
>> Thanks,
>>
>> Steve

[PATCH AUTOSEL 5.2 040/249] af_key: fix leaks in key_pol_get_resp and dump_sp.

[Sasha Levin]

From: Jeremy Sowden <jeremy@azazel.net>

[ Upstream commit 7c80eb1c7e2b8420477fbc998971d62a648035d9 ]

In both functions, if pfkey_xfrm_policy2msg failed we leaked the newly
allocated sk_buff.  Free it on error.

Fixes: 55569ce256ce ("Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.")
Reported-by: syzbot+4f0529365f7f2208d9f0@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/key/af_key.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c
index a50dd6f34b91..fe5fc4bab7ee 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -2438,8 +2438,10 @@ static int key_pol_get_resp(struct sock *sk, struct xfrm_policy *xp, const struc
 		goto out;
 	}
 	err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(out_skb);
 		goto out;
+	}
 
 	out_hdr = (struct sadb_msg *) out_skb->data;
 	out_hdr->sadb_msg_version = hdr->sadb_msg_version;
@@ -2690,8 +2692,10 @@ static int dump_sp(struct xfrm_policy *xp, int dir, int count, void *ptr)
 		return PTR_ERR(out_skb);
 
 	err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(out_skb);
 		return err;
+	}
 
 	out_hdr = (struct sadb_msg *) out_skb->data;
 	out_hdr->sadb_msg_version = pfk->dump.msg_version;
-- 
2.20.1

[PATCH AUTOSEL 5.2 041/249] xfrm: Fix xfrm sel prefix length validation

[Sasha Levin]

From: Anirudh Gupta <anirudhrudr@gmail.com>

[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ]

Family of src/dst can be different from family of selector src/dst.
Use xfrm selector family to validate address prefix length,
while verifying new sa from userspace.

Validated patch with this command:
ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \
reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \
0x1111016400000000000000000000000044440001 128 \
sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5

Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.")
Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 173477211e40..76ad7e201626 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -151,6 +151,22 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 
 	err = -EINVAL;
 	switch (p->family) {
+	case AF_INET:
+		break;
+
+	case AF_INET6:
+#if IS_ENABLED(CONFIG_IPV6)
+		break;
+#else
+		err = -EAFNOSUPPORT;
+		goto out;
+#endif
+
+	default:
+		goto out;
+	}
+
+	switch (p->sel.family) {
 	case AF_INET:
 		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
 			goto out;
-- 
2.20.1

[PATCH AUTOSEL 5.2 042/249] media: vim2m: fix two double-free issues

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 20059cbbf981ca954be56f7963ae494d18e2dda1 ]

vim2m_device_release() will be called by video_unregister_device() to release
various objects.

There are two double-free issue,
1. dev->m2m_dev will be freed twice in error_m2m path/vim2m_device_release
2. the error_v4l2 and error_free path in vim2m_probe() will release
   same objects, since vim2m_device_release has done.

Fixes: ea6c7e34f3b2 ("media: vim2m: replace devm_kzalloc by kzalloc")

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vim2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
index 243c82b5d537..acd3bd48c7e2 100644
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -1359,7 +1359,7 @@ static int vim2m_probe(struct platform_device *pdev)
 						 MEDIA_ENT_F_PROC_VIDEO_SCALER);
 	if (ret) {
 		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem media controller\n");
-		goto error_m2m;
+		goto error_dev;
 	}
 
 	ret = media_device_register(&dev->mdev);
@@ -1373,11 +1373,11 @@ static int vim2m_probe(struct platform_device *pdev)
 #ifdef CONFIG_MEDIA_CONTROLLER
 error_m2m_mc:
 	v4l2_m2m_unregister_media_controller(dev->m2m_dev);
-error_m2m:
-	v4l2_m2m_release(dev->m2m_dev);
 #endif
 error_dev:
 	video_unregister_device(&dev->vfd);
+	/* vim2m_device_release called by video_unregister_device to release various objects */
+	return ret;
 error_v4l2:
 	v4l2_device_unregister(&dev->v4l2_dev);
 error_free:
-- 
2.20.1

[PATCH AUTOSEL 5.2 043/249] media: v4l2-core: fix use-after-free error

[Sasha Levin]

From: sumitg <sumitg@nvidia.com>

[ Upstream commit 3e0f724346e96daae7792262c6767449795ac3b5 ]

Fixing use-after-free within __v4l2_ctrl_handler_setup().
Memory is being freed with kfree(new_ref) for duplicate
control reference entry but ctrl->cluster pointer is still
referring to freed duplicate entry resulting in error on
access. Change done to update cluster pointer only when new
control reference is added.

 ==================================================================
 BUG: KASAN: use-after-free in __v4l2_ctrl_handler_setup+0x388/0x428
 Read of size 8 at addr ffffffc324e78618 by task systemd-udevd/312

 Allocated by task 312:

 Freed by task 312:

 The buggy address belongs to the object at ffffffc324e78600
  which belongs to the cache kmalloc-64 of size 64
 The buggy address is located 24 bytes inside of
  64-byte region [ffffffc324e78600, ffffffc324e78640)
 The buggy address belongs to the page:
 page:ffffffbf0c939e00 count:1 mapcount:0 mapping:
					(null) index:0xffffffc324e78f80
 flags: 0x4000000000000100(slab)
 raw: 4000000000000100 0000000000000000 ffffffc324e78f80 000000018020001a
 raw: 0000000000000000 0000000100000001 ffffffc37040fb80 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffffffc324e78500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
  ffffffc324e78580: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 >ffffffc324e78600: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
                             ^
  ffffffc324e78680: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
  ffffffc324e78700: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
 ==================================================================

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/v4l2-core/v4l2-ctrls.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 7d3a33258748..3c720f54efa8 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -2149,15 +2149,6 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
 	if (size_extra_req)
 		new_ref->p_req.p = &new_ref[1];
 
-	if (ctrl->handler == hdl) {
-		/* By default each control starts in a cluster of its own.
-		   new_ref->ctrl is basically a cluster array with one
-		   element, so that's perfect to use as the cluster pointer.
-		   But only do this for the handler that owns the control. */
-		ctrl->cluster = &new_ref->ctrl;
-		ctrl->ncontrols = 1;
-	}
-
 	INIT_LIST_HEAD(&new_ref->node);
 
 	mutex_lock(hdl->lock);
@@ -2190,6 +2181,15 @@ static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
 	hdl->buckets[bucket] = new_ref;
 	if (ctrl_ref)
 		*ctrl_ref = new_ref;
+	if (ctrl->handler == hdl) {
+		/* By default each control starts in a cluster of its own.
+		 * new_ref->ctrl is basically a cluster array with one
+		 * element, so that's perfect to use as the cluster pointer.
+		 * But only do this for the handler that owns the control.
+		 */
+		ctrl->cluster = &new_ref->ctrl;
+		ctrl->ncontrols = 1;
+	}
 
 unlock:
 	mutex_unlock(hdl->lock);
-- 
2.20.1

[PATCH AUTOSEL 5.2 044/249] fscrypt: clean up some BUG_ON()s in block encryption/decryption

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit eeacfdc68a104967162dfcba60f53f6f5b62a334 ]

Replace some BUG_ON()s with WARN_ON_ONCE() and returning an error code,
and move the check for len divisible by FS_CRYPTO_BLOCK_SIZE into
fscrypt_crypt_block() so that it's done for both encryption and
decryption, not just encryption.

Reviewed-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/crypto/crypto.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/fs/crypto/crypto.c b/fs/crypto/crypto.c
index 335a362ee446..6f753198eeef 100644
--- a/fs/crypto/crypto.c
+++ b/fs/crypto/crypto.c
@@ -154,7 +154,10 @@ int fscrypt_do_page_crypto(const struct inode *inode, fscrypt_direction_t rw,
 	struct crypto_skcipher *tfm = ci->ci_ctfm;
 	int res = 0;
 
-	BUG_ON(len == 0);
+	if (WARN_ON_ONCE(len <= 0))
+		return -EINVAL;
+	if (WARN_ON_ONCE(len % FS_CRYPTO_BLOCK_SIZE != 0))
+		return -EINVAL;
 
 	fscrypt_generate_iv(&iv, lblk_num, ci);
 
@@ -238,8 +241,6 @@ struct page *fscrypt_encrypt_page(const struct inode *inode,
 	struct page *ciphertext_page = page;
 	int err;
 
-	BUG_ON(len % FS_CRYPTO_BLOCK_SIZE != 0);
-
 	if (inode->i_sb->s_cop->flags & FS_CFLG_OWN_PAGES) {
 		/* with inplace-encryption we just encrypt the page */
 		err = fscrypt_do_page_crypto(inode, FS_ENCRYPT, lblk_num, page,
@@ -251,7 +252,8 @@ struct page *fscrypt_encrypt_page(const struct inode *inode,
 		return ciphertext_page;
 	}
 
-	BUG_ON(!PageLocked(page));
+	if (WARN_ON_ONCE(!PageLocked(page)))
+		return ERR_PTR(-EINVAL);
 
 	ctx = fscrypt_get_ctx(gfp_flags);
 	if (IS_ERR(ctx))
@@ -299,8 +301,9 @@ EXPORT_SYMBOL(fscrypt_encrypt_page);
 int fscrypt_decrypt_page(const struct inode *inode, struct page *page,
 			unsigned int len, unsigned int offs, u64 lblk_num)
 {
-	if (!(inode->i_sb->s_cop->flags & FS_CFLG_OWN_PAGES))
-		BUG_ON(!PageLocked(page));
+	if (WARN_ON_ONCE(!PageLocked(page) &&
+			 !(inode->i_sb->s_cop->flags & FS_CFLG_OWN_PAGES)))
+		return -EINVAL;
 
 	return fscrypt_do_page_crypto(inode, FS_DECRYPT, lblk_num, page, page,
 				      len, offs, GFP_NOFS);
-- 
2.20.1

[PATCH AUTOSEL 5.2 045/249] media: usb:zr364xx:Fix KASAN:null-ptr-deref Read in zr364xx_vidioc_querycap

[Sasha Levin]

From: Vandana BN <bnvandana@gmail.com>

[ Upstream commit 5d2e73a5f80a5b5aff3caf1ec6d39b5b3f54b26e ]

SyzKaller hit the null pointer deref while reading from uninitialized
udev->product in zr364xx_vidioc_querycap().

==================================================================
BUG: KASAN: null-ptr-deref in read_word_at_a_time+0xe/0x20
include/linux/compiler.h:274
Read of size 1 at addr 0000000000000000 by task v4l_id/5287

CPU: 1 PID: 5287 Comm: v4l_id Not tainted 5.1.0-rc3-319004-g43151d6 #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xe8/0x16e lib/dump_stack.c:113
  kasan_report.cold+0x5/0x3c mm/kasan/report.c:321
  read_word_at_a_time+0xe/0x20 include/linux/compiler.h:274
  strscpy+0x8a/0x280 lib/string.c:207
  zr364xx_vidioc_querycap+0xb5/0x210 drivers/media/usb/zr364xx/zr364xx.c:706
  v4l_querycap+0x12b/0x340 drivers/media/v4l2-core/v4l2-ioctl.c:1062
  __video_do_ioctl+0x5bb/0xb40 drivers/media/v4l2-core/v4l2-ioctl.c:2874
  video_usercopy+0x44e/0xf00 drivers/media/v4l2-core/v4l2-ioctl.c:3056
  v4l2_ioctl+0x14e/0x1a0 drivers/media/v4l2-core/v4l2-dev.c:364
  vfs_ioctl fs/ioctl.c:46 [inline]
  file_ioctl fs/ioctl.c:509 [inline]
  do_vfs_ioctl+0xced/0x12f0 fs/ioctl.c:696
  ksys_ioctl+0xa0/0xc0 fs/ioctl.c:713
  __do_sys_ioctl fs/ioctl.c:720 [inline]
  __se_sys_ioctl fs/ioctl.c:718 [inline]
  __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:718
  do_syscall_64+0xcf/0x4f0 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f3b56d8b347
Code: 90 90 90 48 8b 05 f1 fa 2a 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff
ff c3 90 90 90 90 90 90 90 90 90 90 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff
ff 73 01 c3 48 8b 0d c1 fa 2a 00 31 d2 48 29 c2 64
RSP: 002b:00007ffe005d5d68 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f3b56d8b347
RDX: 00007ffe005d5d70 RSI: 0000000080685600 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400884
R13: 00007ffe005d5ec0 R14: 0000000000000000 R15: 0000000000000000
==================================================================

For this device udev->product is not initialized and accessing it causes a NULL pointer deref.

The fix is to check for NULL before strscpy() and copy empty string, if
product is NULL

Reported-by: syzbot+66010012fd4c531a1a96@syzkaller.appspotmail.com
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/zr364xx/zr364xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 37a7992585df..48803eb773ed 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -694,7 +694,8 @@ static int zr364xx_vidioc_querycap(struct file *file, void *priv,
 	struct zr364xx_camera *cam = video_drvdata(file);
 
 	strscpy(cap->driver, DRIVER_DESC, sizeof(cap->driver));
-	strscpy(cap->card, cam->udev->product, sizeof(cap->card));
+	if (cam->udev->product)
+		strscpy(cap->card, cam->udev->product, sizeof(cap->card));
 	strscpy(cap->bus_info, dev_name(&cam->udev->dev),
 		sizeof(cap->bus_info));
 	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
-- 
2.20.1

[PATCH AUTOSEL 5.2 046/249] perf annotate TUI browser: Do not use member from variable within its own initialization

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit da2019633f0b5c105ce658aada333422d8cb28fe ]

Some compilers will complain when using a member of a struct to
initialize another member, in the same struct initialization.

For instance:

  debian:8      Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
  oraclelinux:7 clang version 3.4.2 (tags/RELEASE_34/dot2-final)

Produce:

  ui/browsers/annotate.c:104:12: error: variable 'ops' is uninitialized when used within its own initialization [-Werror,-Wuninitialized]
                                              (!ops.current_entry ||
                                                ^~~
  1 error generated.

So use an extra variable, initialized just before that struct, to have
the value used in the expressions used to init two of the struct
members.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: c298304bd747 ("perf annotate: Use a ops table for annotation_line__write()")
Link: https://lkml.kernel.org/n/tip-f9nexro58q62l3o9hez8hr0i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/ui/browsers/annotate.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 98d934a36d86..b0d089a95dac 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -97,11 +97,12 @@ static void annotate_browser__write(struct ui_browser *browser, void *entry, int
 	struct annotate_browser *ab = container_of(browser, struct annotate_browser, b);
 	struct annotation *notes = browser__annotation(browser);
 	struct annotation_line *al = list_entry(entry, struct annotation_line, node);
+	const bool is_current_entry = ui_browser__is_current_entry(browser, row);
 	struct annotation_write_ops ops = {
 		.first_line		 = row == 0,
-		.current_entry		 = ui_browser__is_current_entry(browser, row),
+		.current_entry		 = is_current_entry,
 		.change_color		 = (!notes->options->hide_src_code &&
-					    (!ops.current_entry ||
+					    (!is_current_entry ||
 					     (browser->use_navkeypressed &&
 					      !browser->navkeypressed))),
 		.width			 = browser->width,
-- 
2.20.1

[PATCH AUTOSEL 5.2 047/249] Revert "e1000e: fix cyclic resets at link up with active tx"

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit caff422ea81e144842bc44bab408d85ac449377b ]

This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61.

That change cased false-positive warning about hardware hang:

e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang:
   TDH                  <0>
   TDT                  <1>
   next_to_use          <1>
   next_to_clean        <0>
buffer_info[next_to_clean]:
   time_stamp           <fffba7a7>
   next_to_watch        <0>
   jiffies              <fffbb140>
   next_to_watch.status <0>
MAC Status             <40080080>
PHY Status             <7949>
PHY 1000BASE-T Status  <0>
PHY Extended Status    <3000>
PCI Status             <10>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx

Besides warning everything works fine.
Original issue will be fixed property in following patch.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Joseph Yasi <joe.yasi@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 0e09bede42a2..e21b2ffd1e92 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5308,13 +5308,8 @@ static void e1000_watchdog_task(struct work_struct *work)
 			/* 8000ES2LAN requires a Rx packet buffer work-around
 			 * on link down event; reset the controller to flush
 			 * the Rx packet buffer.
-			 *
-			 * If the link is lost the controller stops DMA, but
-			 * if there is queued Tx work it cannot be done.  So
-			 * reset the controller to flush the Tx packet buffers.
 			 */
-			if ((adapter->flags & FLAG_RX_NEEDS_RESTART) ||
-			    e1000_desc_unused(tx_ring) + 1 < tx_ring->count)
+			if (adapter->flags & FLAG_RX_NEEDS_RESTART)
 				adapter->flags |= FLAG_RESTART_NOW;
 			else
 				pm_schedule_suspend(netdev->dev.parent,
@@ -5337,6 +5332,14 @@ static void e1000_watchdog_task(struct work_struct *work)
 	adapter->gotc_old = adapter->stats.gotc;
 	spin_unlock(&adapter->stats64_lock);
 
+	/* If the link is lost the controller stops DMA, but
+	 * if there is queued Tx work it cannot be done.  So
+	 * reset the controller to flush the Tx packet buffers.
+	 */
+	if (!netif_carrier_ok(netdev) &&
+	    (e1000_desc_unused(tx_ring) + 1 < tx_ring->count))
+		adapter->flags |= FLAG_RESTART_NOW;
+
 	/* If reset is necessary, do it outside of interrupt context. */
 	if (adapter->flags & FLAG_RESTART_NOW) {
 		schedule_work(&adapter->reset_task);
-- 
2.20.1

[PATCH AUTOSEL 5.2 048/249] e1000e: start network tx queue only when link is up

[Sasha Levin]

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

[ Upstream commit d17ba0f616a08f597d9348c372d89b8c0405ccf3 ]

Driver does not want to keep packets in Tx queue when link is lost.
But present code only reset NIC to flush them, but does not prevent
queuing new packets. Moreover reset sequence itself could generate
new packets via netconsole and NIC falls into endless reset loop.

This patch wakes Tx queue only when NIC is ready to send packets.

This is proper fix for problem addressed by commit 0f9e980bf5ee
("e1000e: fix cyclic resets at link up with active tx").

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Tested-by: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index e21b2ffd1e92..b081a1ef6859 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -4208,7 +4208,7 @@ void e1000e_up(struct e1000_adapter *adapter)
 		e1000_configure_msix(adapter);
 	e1000_irq_enable(adapter);
 
-	netif_start_queue(adapter->netdev);
+	/* Tx queue started by watchdog timer when link is up */
 
 	e1000e_trigger_lsc(adapter);
 }
@@ -4606,6 +4606,7 @@ int e1000e_open(struct net_device *netdev)
 	pm_runtime_get_sync(&pdev->dev);
 
 	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
 
 	/* allocate transmit descriptors */
 	err = e1000e_setup_tx_resources(adapter->tx_ring);
@@ -4666,7 +4667,6 @@ int e1000e_open(struct net_device *netdev)
 	e1000_irq_enable(adapter);
 
 	adapter->tx_hang_recheck = false;
-	netif_start_queue(netdev);
 
 	hw->mac.get_link_status = true;
 	pm_runtime_put(&pdev->dev);
@@ -5288,6 +5288,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			if (phy->ops.cfg_on_link_up)
 				phy->ops.cfg_on_link_up(hw);
 
+			netif_wake_queue(netdev);
 			netif_carrier_on(netdev);
 
 			if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -5301,6 +5302,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			/* Link status message must follow this format */
 			pr_info("%s NIC Link is Down\n", adapter->netdev->name);
 			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
 				mod_timer(&adapter->phy_info_timer,
 					  round_jiffies(jiffies + 2 * HZ));
-- 
2.20.1

[PATCH AUTOSEL 5.2 049/249] ice: Check all VFs for MDD activity, don't disable

[Sasha Levin]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit 23c0112246b454e408fb0579b3f9089353d4d327 ]

Don't use the mdd_detected variable as an exit condition for this loop;
the first VF to NOT have an MDD event will cause the loop to terminate.

Instead just look at all of the VFs, but don't disable them. This
prevents proper release of resources if the VFs are rebooted or the VF
driver reloaded. Instead, just log a message and call out repeat
offenders.

To make it clear what we are doing, use a differently-named variable in
the loop.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index dbf3d39ad8b1..1c803106e301 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1161,16 +1161,16 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		}
 	}
 
-	/* see if one of the VFs needs to be reset */
-	for (i = 0; i < pf->num_alloc_vfs && mdd_detected; i++) {
+	/* check to see if one of the VFs caused the MDD */
+	for (i = 0; i < pf->num_alloc_vfs; i++) {
 		struct ice_vf *vf = &pf->vf[i];
 
-		mdd_detected = false;
+		bool vf_mdd_detected = false;
 
 		reg = rd32(hw, VP_MDET_TX_PQM(i));
 		if (reg & VP_MDET_TX_PQM_VALID_M) {
 			wr32(hw, VP_MDET_TX_PQM(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1178,7 +1178,7 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_TX_TCLAN(i));
 		if (reg & VP_MDET_TX_TCLAN_VALID_M) {
 			wr32(hw, VP_MDET_TX_TCLAN(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1186,7 +1186,7 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_TX_TDPU(i));
 		if (reg & VP_MDET_TX_TDPU_VALID_M) {
 			wr32(hw, VP_MDET_TX_TDPU(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "TX driver issue detected on VF %d\n",
 				 i);
 		}
@@ -1194,19 +1194,18 @@ static void ice_handle_mdd_event(struct ice_pf *pf)
 		reg = rd32(hw, VP_MDET_RX(i));
 		if (reg & VP_MDET_RX_VALID_M) {
 			wr32(hw, VP_MDET_RX(i), 0xFFFF);
-			mdd_detected = true;
+			vf_mdd_detected = true;
 			dev_info(&pf->pdev->dev, "RX driver issue detected on VF %d\n",
 				 i);
 		}
 
-		if (mdd_detected) {
+		if (vf_mdd_detected) {
 			vf->num_mdd_events++;
-			dev_info(&pf->pdev->dev,
-				 "Use PF Control I/F to re-enable the VF\n");
-			set_bit(ICE_VF_STATE_DIS, vf->vf_states);
+			if (vf->num_mdd_events > 1)
+				dev_info(&pf->pdev->dev, "VF %d has had %llu MDD events since last boot\n",
+					 i, vf->num_mdd_events);
 		}
 	}
-
 }
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 5.2 050/249] media: mc-device.c: don't memset __user pointer contents

[Sasha Levin]

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit 518fa4e0e0da97ea2e17c95ab57647ce748a96e2 ]

You can't memset the contents of a __user pointer. Instead, call copy_to_user to
copy links.reserved (which is zeroed) to the user memory.

This fixes this sparse warning:

SPARSE:drivers/media/mc/mc-device.c drivers/media/mc/mc-device.c:521:16:  warning: incorrect type in argument 1 (different address spaces)

Fixes: f49308878d720 ("media: media_device_enum_links32: clean a reserved field")

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/media-device.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/media-device.c b/drivers/media/media-device.c
index b9bb4904bba1..e19df5165e78 100644
--- a/drivers/media/media-device.c
+++ b/drivers/media/media-device.c
@@ -510,8 +510,9 @@ static long media_device_enum_links32(struct media_device *mdev,
 	if (ret)
 		return ret;
 
-	memset(ulinks->reserved, 0, sizeof(ulinks->reserved));
-
+	if (copy_to_user(ulinks->reserved, links.reserved,
+			 sizeof(ulinks->reserved)))
+		return -EFAULT;
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 051/249] media: saa7164: fix remove_proc_entry warning

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 50710eeefbc1ed25375942aad0c4d1eb4af0f330 ]

if saa7164_proc_create() fails, saa7164_fini() will trigger a warning,

name 'saa7164'
WARNING: CPU: 1 PID: 6311 at fs/proc/generic.c:672 remove_proc_entry+0x1e8/0x3a0
  ? remove_proc_entry+0x1e8/0x3a0
  ? try_stop_module+0x7b/0x240
  ? proc_readdir+0x70/0x70
  ? rcu_read_lock_sched_held+0xd7/0x100
  saa7164_fini+0x13/0x1f [saa7164]
  __x64_sys_delete_module+0x30c/0x480
  ? __ia32_sys_delete_module+0x480/0x480
  ? __x64_sys_clock_gettime+0x11e/0x1c0
  ? __x64_sys_timer_create+0x1a0/0x1a0
  ? trace_hardirqs_off_caller+0x40/0x180
  ? do_syscall_64+0x18/0x450
  do_syscall_64+0x9f/0x450
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix it by checking the return of proc_create_single() before
calling remove_proc_entry().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 0444 instead of S_IRUGO]
[hverkuil-cisco@xs4all.nl: use pr_info instead of KERN_INFO]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/saa7164/saa7164-core.c | 33 ++++++++++++++++--------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c
index c594aff92e70..9ae04e18e6c6 100644
--- a/drivers/media/pci/saa7164/saa7164-core.c
+++ b/drivers/media/pci/saa7164/saa7164-core.c
@@ -1112,16 +1112,25 @@ static int saa7164_proc_show(struct seq_file *m, void *v)
 	return 0;
 }
 
+static struct proc_dir_entry *saa7164_pe;
+
 static int saa7164_proc_create(void)
 {
-	struct proc_dir_entry *pe;
-
-	pe = proc_create_single("saa7164", S_IRUGO, NULL, saa7164_proc_show);
-	if (!pe)
+	saa7164_pe = proc_create_single("saa7164", 0444, NULL, saa7164_proc_show);
+	if (!saa7164_pe)
 		return -ENOMEM;
 
 	return 0;
 }
+
+static void saa7164_proc_destroy(void)
+{
+	if (saa7164_pe)
+		remove_proc_entry("saa7164", NULL);
+}
+#else
+static int saa7164_proc_create(void) { return 0; }
+static void saa7164_proc_destroy(void) {}
 #endif
 
 static int saa7164_thread_function(void *data)
@@ -1493,19 +1502,21 @@ static struct pci_driver saa7164_pci_driver = {
 
 static int __init saa7164_init(void)
 {
-	printk(KERN_INFO "saa7164 driver loaded\n");
+	int ret = pci_register_driver(&saa7164_pci_driver);
+
+	if (ret)
+		return ret;
 
-#ifdef CONFIG_PROC_FS
 	saa7164_proc_create();
-#endif
-	return pci_register_driver(&saa7164_pci_driver);
+
+	pr_info("saa7164 driver loaded\n");
+
+	return 0;
 }
 
 static void __exit saa7164_fini(void)
 {
-#ifdef CONFIG_PROC_FS
-	remove_proc_entry("saa7164", NULL);
-#endif
+	saa7164_proc_destroy();
 	pci_unregister_driver(&saa7164_pci_driver);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 052/249] ASoC: Intel: sof-rt5682: fix undefined references with Baytrail-only support

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 17fc24875da1bef4650cf007edae3b2e26d2fa4e ]

The sof-rt5682 machine driver supports both legacy Baytrail devices
and more recent ApolloLake/CometLake platforms. When only Baytrail is
selected, the compilation fails with the following errors:

ERROR: "hdac_hdmi_jack_port_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

ERROR: "hdac_hdmi_jack_init"
[sound/soc/intel/boards/snd-soc-sof_rt5682.ko] undefined!

Fix by selecting SND_SOC_HDAC_HDMI unconditionally. The code for HDMI
support is not reachable on Baytrail so this change has no functional
impact.

Fixes: f70abd75b7c6 ("ASoC: Intel: add sof-rt5682 machine driver")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 5407d217228e..c0aef45d335a 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -392,7 +392,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH
 		   (SND_SOC_SOF_BAYTRAIL && X86_INTEL_LPSS)
 	select SND_SOC_RT5682
 	select SND_SOC_DMIC
-	select SND_SOC_HDAC_HDMI if SND_SOC_SOF_HDA_COMMON
+	select SND_SOC_HDAC_HDMI
 	help
 	   This adds support for ASoC machine driver for SOF platforms
 	   with rt5682 codec.
-- 
2.20.1

[PATCH AUTOSEL 5.2 053/249] media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.

[Sasha Levin]

From: Shailendra Verma <shailendra.v@samsung.com>

[ Upstream commit 6995a659101bd4effa41cebb067f9dc18d77520d ]

Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/davinci_vpfe/vpfe_video.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index 510202a3b091..84cca18e3e9d 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -419,6 +419,9 @@ static int vpfe_open(struct file *file)
 	/* If decoder is not initialized. initialize it */
 	if (!video->initialized && vpfe_update_pipe_state(video)) {
 		mutex_unlock(&video->lock);
+		v4l2_fh_del(&handle->vfh);
+		v4l2_fh_exit(&handle->vfh);
+		kfree(handle);
 		return -ENODEV;
 	}
 	/* Increment device users counter */
-- 
2.20.1

[PATCH AUTOSEL 5.2 053/249] media: staging: media: davinci_vpfe: - Fix for memory leak if decoder initialization fails.

[Sasha Levin]

From: Shailendra Verma <shailendra.v@samsung.com>

[ Upstream commit 6995a659101bd4effa41cebb067f9dc18d77520d ]

Fix to avoid possible memory leak if the decoder initialization
got failed.Free the allocated memory for file handle object
before return in case decoder initialization fails.

Signed-off-by: Shailendra Verma <shailendra.v@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/davinci_vpfe/vpfe_video.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index 510202a3b091..84cca18e3e9d 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -419,6 +419,9 @@ static int vpfe_open(struct file *file)
 	/* If decoder is not initialized. initialize it */
 	if (!video->initialized && vpfe_update_pipe_state(video)) {
 		mutex_unlock(&video->lock);
+		v4l2_fh_del(&handle->vfh);
+		v4l2_fh_exit(&handle->vfh);
+		kfree(handle);
 		return -ENODEV;
 	}
 	/* Increment device users counter */
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.2 054/249] net: phy: Check against net_device being NULL

[Sasha Levin]

From: Ioana Ciornei <ioana.ciornei@nxp.com>

[ Upstream commit 82c76aca81187b3d28a6fb3062f6916450ce955e ]

In general, we don't want MAC drivers calling phy_attach_direct with the
net_device being NULL. Add checks against this in all the functions
calling it: phy_attach() and phy_connect_direct().

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy_device.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index dcc93a873174..a3f8740c6163 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -948,6 +948,9 @@ int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
 {
 	int rc;
 
+	if (!dev)
+		return -EINVAL;
+
 	rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface);
 	if (rc)
 		return rc;
@@ -1290,6 +1293,9 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
 	struct device *d;
 	int rc;
 
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
 	/* Search the list of PHY devices on the mdio bus for the
 	 * PHY with the requested name
 	 */
-- 
2.20.1

[PATCH AUTOSEL 5.2 055/249] net: dsa: sja1105: Fix broken fixed-link interfaces on user ports

[Sasha Levin]

From: Vladimir Oltean <olteanv@gmail.com>

[ Upstream commit af7cd0366ee994e8b35985d407261dc0ed9dfb4d ]

PHYLIB and PHYLINK handle fixed-link interfaces differently. PHYLIB
wraps them in a software PHY ("pseudo fixed link") phydev construct such
that .adjust_link driver callbacks see an unified API. Whereas PHYLINK
simply creates a phylink_link_state structure and passes it to
.mac_config.

At the time the driver was introduced, DSA was using PHYLIB for the
CPU/cascade ports (the ones with no net devices) and PHYLINK for
everything else.

As explained below:

commit aab9c4067d2389d0adfc9c53806437df7b0fe3d5
Author: Florian Fainelli <f.fainelli@gmail.com>
Date:   Thu May 10 13:17:36 2018 -0700

  net: dsa: Plug in PHYLINK support

  Drivers that utilize fixed links for user-facing ports (e.g: bcm_sf2)
  will need to implement phylink_mac_ops from now on to preserve
  functionality, since PHYLINK *does not* create a phy_device instance
  for fixed links.

In the above patch, DSA guards the .phylink_mac_config callback against
a NULL phydev pointer.  Therefore, .adjust_link is not called in case of
a fixed-link user port.

This patch fixes the situation by converting the driver from using
.adjust_link to .phylink_mac_config.  This can be done now in a unified
fashion for both slave and CPU/cascade ports because DSA now uses
PHYLINK for all ports.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/sja1105/sja1105_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 1c3959efebc4..844e038f3dc6 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -734,15 +734,16 @@ static int sja1105_adjust_port_config(struct sja1105_private *priv, int port,
 	return sja1105_clocking_setup_port(priv, port);
 }
 
-static void sja1105_adjust_link(struct dsa_switch *ds, int port,
-				struct phy_device *phydev)
+static void sja1105_mac_config(struct dsa_switch *ds, int port,
+			       unsigned int link_an_mode,
+			       const struct phylink_link_state *state)
 {
 	struct sja1105_private *priv = ds->priv;
 
-	if (!phydev->link)
+	if (!state->link)
 		sja1105_adjust_port_config(priv, port, 0, false);
 	else
-		sja1105_adjust_port_config(priv, port, phydev->speed, true);
+		sja1105_adjust_port_config(priv, port, state->speed, true);
 }
 
 static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
@@ -1515,9 +1516,9 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
 static const struct dsa_switch_ops sja1105_switch_ops = {
 	.get_tag_protocol	= sja1105_get_tag_protocol,
 	.setup			= sja1105_setup,
-	.adjust_link		= sja1105_adjust_link,
 	.set_ageing_time	= sja1105_set_ageing_time,
 	.phylink_validate	= sja1105_phylink_validate,
+	.phylink_mac_config	= sja1105_mac_config,
 	.get_strings		= sja1105_get_strings,
 	.get_ethtool_stats	= sja1105_get_ethtool_stats,
 	.get_sset_count		= sja1105_get_sset_count,
-- 
2.20.1

[PATCH AUTOSEL 5.2 056/249] crypto: talitos - properly handle split ICV.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit eae55a586c3c8b50982bad3c3426e9c9dd7a0075 ]

The driver assumes that the ICV is as a single piece in the last
element of the scatterlist. This assumption is wrong.

This patch ensures that the ICV is properly handled regardless of
the scatterlist layout.

Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/talitos.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 2d9a0971a7fc..eec880909fdf 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1050,7 +1050,6 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 	unsigned int authsize = crypto_aead_authsize(authenc);
 	unsigned int ivsize = crypto_aead_ivsize(authenc);
 	struct talitos_edesc *edesc;
-	struct scatterlist *sg;
 	void *icvdata;
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
@@ -1064,9 +1063,8 @@ static void ipsec_esp_encrypt_done(struct device *dev,
 		else
 			icvdata = &edesc->link_tbl[edesc->src_nents +
 						   edesc->dst_nents + 2];
-		sg = sg_last(areq->dst, edesc->dst_nents);
-		memcpy((char *)sg_virt(sg) + sg->length - authsize,
-		       icvdata, authsize);
+		sg_pcopy_from_buffer(areq->dst, edesc->dst_nents ? : 1, icvdata,
+				     authsize, areq->assoclen + areq->cryptlen);
 	}
 
 	dma_unmap_single(dev, edesc->iv_dma, ivsize, DMA_TO_DEVICE);
@@ -1084,7 +1082,6 @@ static void ipsec_esp_decrypt_swauth_done(struct device *dev,
 	struct crypto_aead *authenc = crypto_aead_reqtfm(req);
 	unsigned int authsize = crypto_aead_authsize(authenc);
 	struct talitos_edesc *edesc;
-	struct scatterlist *sg;
 	char *oicv, *icv;
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	bool is_sec1 = has_ftr_sec1(priv);
@@ -1094,9 +1091,18 @@ static void ipsec_esp_decrypt_swauth_done(struct device *dev,
 	ipsec_esp_unmap(dev, edesc, req);
 
 	if (!err) {
+		char icvdata[SHA512_DIGEST_SIZE];
+		int nents = edesc->dst_nents ? : 1;
+		unsigned int len = req->assoclen + req->cryptlen;
+
 		/* auth check */
-		sg = sg_last(req->dst, edesc->dst_nents ? : 1);
-		icv = (char *)sg_virt(sg) + sg->length - authsize;
+		if (nents > 1) {
+			sg_pcopy_to_buffer(req->dst, nents, icvdata, authsize,
+					   len - authsize);
+			icv = icvdata;
+		} else {
+			icv = (char *)sg_virt(req->dst) + len - authsize;
+		}
 
 		if (edesc->dma_len) {
 			if (is_sec1)
@@ -1516,7 +1522,6 @@ static int aead_decrypt(struct aead_request *req)
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	struct talitos_private *priv = dev_get_drvdata(ctx->dev);
 	struct talitos_edesc *edesc;
-	struct scatterlist *sg;
 	void *icvdata;
 
 	req->cryptlen -= authsize;
@@ -1550,9 +1555,8 @@ static int aead_decrypt(struct aead_request *req)
 	else
 		icvdata = &edesc->link_tbl[0];
 
-	sg = sg_last(req->src, edesc->src_nents ? : 1);
-
-	memcpy(icvdata, (char *)sg_virt(sg) + sg->length - authsize, authsize);
+	sg_pcopy_to_buffer(req->src, edesc->src_nents ? : 1, icvdata, authsize,
+			   req->assoclen + req->cryptlen - authsize);
 
 	return ipsec_esp(edesc, req, ipsec_esp_decrypt_swauth_done);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 057/249] crypto: talitos - Align SEC1 accesses to 32 bits boundaries.

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit c9cca7034b34a2d82e9a03b757de2485c294851c ]

The MPC885 reference manual states:

SEC Lite-initiated 8xx writes can occur only on 32-bit-word boundaries, but
reads can occur on any byte boundary. Writing back a header read from a
non-32-bit-word boundary will yield unpredictable results.

In order to ensure that, cra_alignmask is set to 3 for SEC1.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/talitos.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index eec880909fdf..b6433d58df41 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -3278,7 +3278,10 @@ static struct talitos_crypto_alg *talitos_alg_alloc(struct device *dev,
 		alg->cra_priority = t_alg->algt.priority;
 	else
 		alg->cra_priority = TALITOS_CRA_PRIORITY;
-	alg->cra_alignmask = 0;
+	if (has_ftr_sec1(priv))
+		alg->cra_alignmask = 3;
+	else
+		alg->cra_alignmask = 0;
 	alg->cra_ctxsize = sizeof(struct talitos_ctx);
 	alg->cra_flags |= CRYPTO_ALG_KERN_DRIVER_ONLY;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 058/249] tua6100: Avoid build warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 621ccc6cc5f8d6730b740d31d4818227866c93c9 ]

Rename _P to _P_VAL and _R to _R_VAL to avoid global
namespace conflicts:

drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’:
drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined
 #define _P 32

In file included from ./include/acpi/platform/aclinux.h:54,
                 from ./include/acpi/platform/acenv.h:152,
                 from ./include/acpi/acpi.h:22,
                 from ./include/linux/acpi.h:34,
                 from ./include/linux/i2c.h:17,
                 from drivers/media/dvb-frontends/tua6100.h:30,
                 from drivers/media/dvb-frontends/tua6100.c:32:
./include/linux/ctype.h:14: note: this is the location of the previous definition
 #define _P 0x10 /* punct */

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/dvb-frontends/tua6100.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/media/dvb-frontends/tua6100.c b/drivers/media/dvb-frontends/tua6100.c
index f7c3e6be8e4d..2483f614d0e7 100644
--- a/drivers/media/dvb-frontends/tua6100.c
+++ b/drivers/media/dvb-frontends/tua6100.c
@@ -67,8 +67,8 @@ static int tua6100_set_params(struct dvb_frontend *fe)
 	struct i2c_msg msg1 = { .addr = priv->i2c_address, .flags = 0, .buf = reg1, .len = 4 };
 	struct i2c_msg msg2 = { .addr = priv->i2c_address, .flags = 0, .buf = reg2, .len = 3 };
 
-#define _R 4
-#define _P 32
+#define _R_VAL 4
+#define _P_VAL 32
 #define _ri 4000000
 
 	// setup register 0
@@ -83,14 +83,14 @@ static int tua6100_set_params(struct dvb_frontend *fe)
 	else
 		reg1[1] = 0x0c;
 
-	if (_P == 64)
+	if (_P_VAL == 64)
 		reg1[1] |= 0x40;
 	if (c->frequency >= 1525000)
 		reg1[1] |= 0x80;
 
 	// register 2
-	reg2[1] = (_R >> 8) & 0x03;
-	reg2[2] = _R;
+	reg2[1] = (_R_VAL >> 8) & 0x03;
+	reg2[2] = _R_VAL;
 	if (c->frequency < 1455000)
 		reg2[1] |= 0x1c;
 	else if (c->frequency < 1630000)
@@ -102,18 +102,18 @@ static int tua6100_set_params(struct dvb_frontend *fe)
 	 * The N divisor ratio (note: c->frequency is in kHz, but we
 	 * need it in Hz)
 	 */
-	prediv = (c->frequency * _R) / (_ri / 1000);
-	div = prediv / _P;
+	prediv = (c->frequency * _R_VAL) / (_ri / 1000);
+	div = prediv / _P_VAL;
 	reg1[1] |= (div >> 9) & 0x03;
 	reg1[2] = div >> 1;
 	reg1[3] = (div << 7);
-	priv->frequency = ((div * _P) * (_ri / 1000)) / _R;
+	priv->frequency = ((div * _P_VAL) * (_ri / 1000)) / _R_VAL;
 
 	// Finally, calculate and store the value for A
-	reg1[3] |= (prediv - (div*_P)) & 0x7f;
+	reg1[3] |= (prediv - (div*_P_VAL)) & 0x7f;
 
-#undef _R
-#undef _P
+#undef _R_VAL
+#undef _P_VAL
 #undef _ri
 
 	if (fe->ops.i2c_gate_ctrl)
-- 
2.20.1

[PATCH AUTOSEL 5.2 059/249] batman-adv: Fix duplicated OGMs on NETDEV_UP

[Sasha Levin]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 9e6b5648bbc4cd48fab62cecbb81e9cc3c6e7e88 ]

The state of slave interfaces are handled differently depending on whether
the interface is up or not. All active interfaces (IFF_UP) will transmit
OGMs. But for B.A.T.M.A.N. IV, also non-active interfaces are scheduling
(low TTL) OGMs on active interfaces. The code which setups and schedules
the OGMs must therefore already be called when the interfaces gets added as
slave interface and the transmit function must then check whether it has to
send out the OGM or not on the specific slave interface.

But the commit f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule
API calls") moved the setup code from the enable function to the activate
function. The latter is called either when the added slave was already up
when batadv_hardif_enable_interface processed the new interface or when a
NETDEV_UP event was received for this slave interfac. As result, each
NETDEV_UP would schedule a new OGM worker for the interface and thus OGMs
would be send a lot more than expected.

Fixes: f0d97253fb5f ("batman-adv: remove ogm_emit and ogm_schedule API calls")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Tested-by: Linus Lüssing <linus.luessing@c0d3.blue>
Acked-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_iv_ogm.c     | 4 ++--
 net/batman-adv/hard-interface.c | 3 +++
 net/batman-adv/types.h          | 3 +++
 3 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index bd4138ddf7e0..240ed70912d6 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -2337,7 +2337,7 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1,
 	return ret;
 }
 
-static void batadv_iv_iface_activate(struct batadv_hard_iface *hard_iface)
+static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface)
 {
 	/* begin scheduling originator messages on that interface */
 	batadv_iv_ogm_schedule(hard_iface);
@@ -2683,8 +2683,8 @@ static void batadv_iv_gw_dump(struct sk_buff *msg, struct netlink_callback *cb,
 static struct batadv_algo_ops batadv_batman_iv __read_mostly = {
 	.name = "BATMAN_IV",
 	.iface = {
-		.activate = batadv_iv_iface_activate,
 		.enable = batadv_iv_ogm_iface_enable,
+		.enabled = batadv_iv_iface_enabled,
 		.disable = batadv_iv_ogm_iface_disable,
 		.update_mac = batadv_iv_ogm_iface_update_mac,
 		.primary_set = batadv_iv_ogm_primary_iface_set,
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 79d1731b8306..3719cfd026f0 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -795,6 +795,9 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
 
 	batadv_hardif_recalc_extra_skbroom(soft_iface);
 
+	if (bat_priv->algo_ops->iface.enabled)
+		bat_priv->algo_ops->iface.enabled(hard_iface);
+
 out:
 	return 0;
 
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 74b644738a36..e0b25104cbfa 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -2129,6 +2129,9 @@ struct batadv_algo_iface_ops {
 	/** @enable: init routing info when hard-interface is enabled */
 	int (*enable)(struct batadv_hard_iface *hard_iface);
 
+	/** @enabled: notification when hard-interface was enabled (optional) */
+	void (*enabled)(struct batadv_hard_iface *hard_iface);
+
 	/** @disable: de-init routing info when hard-interface is disabled */
 	void (*disable)(struct batadv_hard_iface *hard_iface);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 060/249] locking/lockdep: Fix OOO unlock when hlocks need merging

[Sasha Levin]

From: Imre Deak <imre.deak@intel.com>

[ Upstream commit 8c8889d8eaf4501ae4aaf870b6f8f55db5d5109a ]

The sequence

	static DEFINE_WW_CLASS(test_ww_class);

	struct ww_acquire_ctx ww_ctx;
	struct ww_mutex ww_lock_a;
	struct ww_mutex ww_lock_b;
	struct mutex lock_c;
	struct mutex lock_d;

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);

	mutex_init(&lock_c);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);

	mutex_unlock(&lock_c);		(*)

	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	ww_acquire_fini(&ww_ctx);

triggers the following WARN in __lock_release() when doing the unlock at *:

	DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth - 1);

The problem is that the WARN check doesn't take into account the merging
of ww_lock_a and ww_lock_b which results in decreasing curr->lockdep_depth
by 2 not only 1.

Note that the following sequence doesn't trigger the WARN, since there
won't be any hlock merging.

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);

	mutex_init(&lock_c);
	mutex_init(&lock_d);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);
	mutex_lock(&lock_d);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);

	mutex_unlock(&lock_d);

	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	mutex_unlock(&lock_c);

	ww_acquire_fini(&ww_ctx);

In general both of the above two sequences are valid and shouldn't
trigger any lockdep warning.

Fix this by taking the decrement due to the hlock merging into account
during lock release and hlock class re-setting. Merging can't happen
during lock downgrading since there won't be a new possibility to merge
hlocks in that case, so add a WARN if merging still happens then.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: ville.syrjala@linux.intel.com
Link: https://lkml.kernel.org/r/20190524201509.9199-1-imre.deak@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 41 ++++++++++++++++++++++++++++------------
 1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index c47788fa85f9..82361e1bce0f 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3715,7 +3715,7 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 				hlock->references = 2;
 			}
 
-			return 1;
+			return 2;
 		}
 	}
 
@@ -3921,22 +3921,33 @@ static struct held_lock *find_held_lock(struct task_struct *curr,
 }
 
 static int reacquire_held_locks(struct task_struct *curr, unsigned int depth,
-			      int idx)
+				int idx, unsigned int *merged)
 {
 	struct held_lock *hlock;
+	int first_idx = idx;
 
 	if (DEBUG_LOCKS_WARN_ON(!irqs_disabled()))
 		return 0;
 
 	for (hlock = curr->held_locks + idx; idx < depth; idx++, hlock++) {
-		if (!__lock_acquire(hlock->instance,
+		switch (__lock_acquire(hlock->instance,
 				    hlock_class(hlock)->subclass,
 				    hlock->trylock,
 				    hlock->read, hlock->check,
 				    hlock->hardirqs_off,
 				    hlock->nest_lock, hlock->acquire_ip,
-				    hlock->references, hlock->pin_count))
+				    hlock->references, hlock->pin_count)) {
+		case 0:
 			return 1;
+		case 1:
+			break;
+		case 2:
+			*merged += (idx == first_idx);
+			break;
+		default:
+			WARN_ON(1);
+			return 0;
+		}
 	}
 	return 0;
 }
@@ -3947,9 +3958,9 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
 		 unsigned long ip)
 {
 	struct task_struct *curr = current;
+	unsigned int depth, merged = 0;
 	struct held_lock *hlock;
 	struct lock_class *class;
-	unsigned int depth;
 	int i;
 
 	if (unlikely(!debug_locks))
@@ -3974,14 +3985,14 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
 	curr->lockdep_depth = i;
 	curr->curr_chain_key = hlock->prev_chain_key;
 
-	if (reacquire_held_locks(curr, depth, i))
+	if (reacquire_held_locks(curr, depth, i, &merged))
 		return 0;
 
 	/*
 	 * I took it apart and put it back together again, except now I have
 	 * these 'spare' parts.. where shall I put them.
 	 */
-	if (DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth))
+	if (DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth - merged))
 		return 0;
 	return 1;
 }
@@ -3989,8 +4000,8 @@ __lock_set_class(struct lockdep_map *lock, const char *name,
 static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
 {
 	struct task_struct *curr = current;
+	unsigned int depth, merged = 0;
 	struct held_lock *hlock;
-	unsigned int depth;
 	int i;
 
 	if (unlikely(!debug_locks))
@@ -4015,7 +4026,11 @@ static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
 	hlock->read = 1;
 	hlock->acquire_ip = ip;
 
-	if (reacquire_held_locks(curr, depth, i))
+	if (reacquire_held_locks(curr, depth, i, &merged))
+		return 0;
+
+	/* Merging can't happen with unchanged classes.. */
+	if (DEBUG_LOCKS_WARN_ON(merged))
 		return 0;
 
 	/*
@@ -4024,6 +4039,7 @@ static int __lock_downgrade(struct lockdep_map *lock, unsigned long ip)
 	 */
 	if (DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth))
 		return 0;
+
 	return 1;
 }
 
@@ -4038,8 +4054,8 @@ static int
 __lock_release(struct lockdep_map *lock, int nested, unsigned long ip)
 {
 	struct task_struct *curr = current;
+	unsigned int depth, merged = 1;
 	struct held_lock *hlock;
-	unsigned int depth;
 	int i;
 
 	if (unlikely(!debug_locks))
@@ -4094,14 +4110,15 @@ __lock_release(struct lockdep_map *lock, int nested, unsigned long ip)
 	if (i == depth-1)
 		return 1;
 
-	if (reacquire_held_locks(curr, depth, i + 1))
+	if (reacquire_held_locks(curr, depth, i + 1, &merged))
 		return 0;
 
 	/*
 	 * We had N bottles of beer on the wall, we drank one, but now
 	 * there's not N-1 bottles of beer left on the wall...
+	 * Pouring two of the bottles together is acceptable.
 	 */
-	DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth-1);
+	DEBUG_LOCKS_WARN_ON(curr->lockdep_depth != depth - merged);
 
 	/*
 	 * Since reacquire_held_locks() would have called check_chain_key()
-- 
2.20.1

[PATCH AUTOSEL 5.2 061/249] locking/lockdep: Fix merging of hlocks with non-zero references

[Sasha Levin]

From: Imre Deak <imre.deak@intel.com>

[ Upstream commit d9349850e188b8b59e5322fda17ff389a1c0cd7d ]

The sequence

	static DEFINE_WW_CLASS(test_ww_class);

	struct ww_acquire_ctx ww_ctx;
	struct ww_mutex ww_lock_a;
	struct ww_mutex ww_lock_b;
	struct ww_mutex ww_lock_c;
	struct mutex lock_c;

	ww_acquire_init(&ww_ctx, &test_ww_class);

	ww_mutex_init(&ww_lock_a, &test_ww_class);
	ww_mutex_init(&ww_lock_b, &test_ww_class);
	ww_mutex_init(&ww_lock_c, &test_ww_class);

	mutex_init(&lock_c);

	ww_mutex_lock(&ww_lock_a, &ww_ctx);

	mutex_lock(&lock_c);

	ww_mutex_lock(&ww_lock_b, &ww_ctx);
	ww_mutex_lock(&ww_lock_c, &ww_ctx);

	mutex_unlock(&lock_c);	(*)

	ww_mutex_unlock(&ww_lock_c);
	ww_mutex_unlock(&ww_lock_b);
	ww_mutex_unlock(&ww_lock_a);

	ww_acquire_fini(&ww_ctx); (**)

will trigger the following error in __lock_release() when calling
mutex_release() at **:

	DEBUG_LOCKS_WARN_ON(depth <= 0)

The problem is that the hlock merging happening at * updates the
references for test_ww_class incorrectly to 3 whereas it should've
updated it to 4 (representing all the instances for ww_ctx and
ww_lock_[abc]).

Fix this by updating the references during merging correctly taking into
account that we can have non-zero references (both for the hlock that we
merge into another hlock or for the hlock we are merging into).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190524201509.9199-2-imre.deak@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/lockdep.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/kernel/locking/lockdep.c b/kernel/locking/lockdep.c
index 82361e1bce0f..dbc936ccf149 100644
--- a/kernel/locking/lockdep.c
+++ b/kernel/locking/lockdep.c
@@ -3703,17 +3703,17 @@ static int __lock_acquire(struct lockdep_map *lock, unsigned int subclass,
 	if (depth) {
 		hlock = curr->held_locks + depth - 1;
 		if (hlock->class_idx == class_idx && nest_lock) {
-			if (hlock->references) {
-				/*
-				 * Check: unsigned int references:12, overflow.
-				 */
-				if (DEBUG_LOCKS_WARN_ON(hlock->references == (1 << 12)-1))
-					return 0;
+			if (!references)
+				references++;
 
+			if (!hlock->references)
 				hlock->references++;
-			} else {
-				hlock->references = 2;
-			}
+
+			hlock->references += references;
+
+			/* Overflow */
+			if (DEBUG_LOCKS_WARN_ON(hlock->references < references))
+				return 0;
 
 			return 2;
 		}
-- 
2.20.1

[PATCH AUTOSEL 5.2 062/249] media: platform: ao-cec-g12a: disable regmap fast_io for cec bus regmap

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 9f7406d6b56b4b71a12480b68221755ea7b3e0ee ]

With fast_io enabled, spinlock_irq is used for read/write operations,
thus leading to :
BUG: sleeping function called from invalid context at [snip]/ao-cec-g12a.c:379
 in_atomic(): 1, irqs_disabled(): 128, pid: 1451, name: irq/14-ff800280
[snip]
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x1c
 dump_stack+0xa8/0xe0
 ___might_sleep+0xf4/0x104
 __might_sleep+0x4c/0x80
 meson_ao_cec_g12a_read+0x7c/0x164
 regmap_read+0x16c/0x1b0
 meson_ao_cec_g12a_irq_thread+0xcc/0x200
 irq_thread_fn+0x2c/0x60
 irq_thread+0x14c/0x1fc
 kthread+0x11c/0x12c
 ret_from_fork+0x10/0x18

Simply remove fast_io to use mutexes instead.

Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/meson/ao-cec-g12a.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
index 3620a1e310f5..ddfd060625da 100644
--- a/drivers/media/platform/meson/ao-cec-g12a.c
+++ b/drivers/media/platform/meson/ao-cec-g12a.c
@@ -415,7 +415,6 @@ static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
 	.reg_read = meson_ao_cec_g12a_read,
 	.reg_write = meson_ao_cec_g12a_write,
 	.max_register = 0xffff,
-	.fast_io = true,
 };
 
 static inline void
-- 
2.20.1

[PATCH AUTOSEL 5.2 062/249] media: platform: ao-cec-g12a: disable regmap fast_io for cec bus regmap

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit 9f7406d6b56b4b71a12480b68221755ea7b3e0ee ]

With fast_io enabled, spinlock_irq is used for read/write operations,
thus leading to :
BUG: sleeping function called from invalid context at [snip]/ao-cec-g12a.c:379
 in_atomic(): 1, irqs_disabled(): 128, pid: 1451, name: irq/14-ff800280
[snip]
Call trace:
 dump_backtrace+0x0/0x180
 show_stack+0x14/0x1c
 dump_stack+0xa8/0xe0
 ___might_sleep+0xf4/0x104
 __might_sleep+0x4c/0x80
 meson_ao_cec_g12a_read+0x7c/0x164
 regmap_read+0x16c/0x1b0
 meson_ao_cec_g12a_irq_thread+0xcc/0x200
 irq_thread_fn+0x2c/0x60
 irq_thread+0x14c/0x1fc
 kthread+0x11c/0x12c
 ret_from_fork+0x10/0x18

Simply remove fast_io to use mutexes instead.

Fixes: b7778c46683c ("media: platform: meson: Add Amlogic Meson G12A AO CEC Controller driver")

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/meson/ao-cec-g12a.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/platform/meson/ao-cec-g12a.c b/drivers/media/platform/meson/ao-cec-g12a.c
index 3620a1e310f5..ddfd060625da 100644
--- a/drivers/media/platform/meson/ao-cec-g12a.c
+++ b/drivers/media/platform/meson/ao-cec-g12a.c
@@ -415,7 +415,6 @@ static const struct regmap_config meson_ao_cec_g12a_cec_regmap_conf = {
 	.reg_read = meson_ao_cec_g12a_read,
 	.reg_write = meson_ao_cec_g12a_write,
 	.max_register = 0xffff,
-	.fast_io = true,
 };
 
 static inline void
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 5.2 063/249] media: wl128x: Fix some error handling in fm_v4l2_init_video_device()

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 69fbb3f47327d959830c94bf31893972b8c8f700 ]

X-Originating-IP: [10.175.113.25]
X-CFilter-Loop: Reflected
The fm_v4l2_init_video_device() forget to unregister v4l2/video device
in the error path, it could lead to UAF issue, eg,

  BUG: KASAN: use-after-free in atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline]
  BUG: KASAN: use-after-free in atomic_long_read include/asm-generic/atomic-long.h:28 [inline]
  BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206
  Read of size 8 at addr ffff8881e84a7c70 by task v4l_id/3659

  CPU: 1 PID: 3659 Comm: v4l_id Not tainted 5.1.0 #8
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0xa9/0x10e lib/dump_stack.c:113
   print_address_description+0x65/0x270 mm/kasan/report.c:187
   kasan_report+0x149/0x18d mm/kasan/report.c:317
   atomic64_read include/asm-generic/atomic-instrumented.h:836 [inline]
   atomic_long_read include/asm-generic/atomic-long.h:28 [inline]
   __mutex_unlock_slowpath+0x92/0x690 kernel/locking/mutex.c:1206
   fm_v4l2_fops_open+0xac/0x120 [fm_drv]
   v4l2_open+0x191/0x390 [videodev]
   chrdev_open+0x20d/0x570 fs/char_dev.c:417
   do_dentry_open+0x700/0xf30 fs/open.c:777
   do_last fs/namei.c:3416 [inline]
   path_openat+0x7c4/0x2a90 fs/namei.c:3532
   do_filp_open+0x1a5/0x2b0 fs/namei.c:3563
   do_sys_open+0x302/0x490 fs/open.c:1069
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f8180c17c8e
  ...
  Allocated by task 3642:
   set_track mm/kasan/common.c:87 [inline]
   __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:497
   fm_drv_init+0x13/0x1000 [fm_drv]
   do_one_initcall+0xbc/0x47d init/main.c:901
   do_init_module+0x1b5/0x547 kernel/module.c:3456
   load_module+0x6405/0x8c10 kernel/module.c:3804
   __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 3642:
   set_track mm/kasan/common.c:87 [inline]
   __kasan_slab_free+0x130/0x180 mm/kasan/common.c:459
   slab_free_hook mm/slub.c:1429 [inline]
   slab_free_freelist_hook mm/slub.c:1456 [inline]
   slab_free mm/slub.c:3003 [inline]
   kfree+0xe1/0x270 mm/slub.c:3958
   fm_drv_init+0x1e6/0x1000 [fm_drv]
   do_one_initcall+0xbc/0x47d init/main.c:901
   do_init_module+0x1b5/0x547 kernel/module.c:3456
   load_module+0x6405/0x8c10 kernel/module.c:3804
   __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
   do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Add relevant unregister functions to fix it.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/radio/wl128x/fmdrv_v4l2.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c
index c80a6df47f5e..469366dae1d5 100644
--- a/drivers/media/radio/wl128x/fmdrv_v4l2.c
+++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c
@@ -541,6 +541,7 @@ int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr)
 
 	/* Register with V4L2 subsystem as RADIO device */
 	if (video_register_device(&gradio_dev, VFL_TYPE_RADIO, radio_nr)) {
+		v4l2_device_unregister(&fmdev->v4l2_dev);
 		fmerr("Could not register video device\n");
 		return -ENOMEM;
 	}
@@ -554,6 +555,8 @@ int fm_v4l2_init_video_device(struct fmdev *fmdev, int radio_nr)
 	if (ret < 0) {
 		fmerr("(fmdev): Can't init ctrl handler\n");
 		v4l2_ctrl_handler_free(&fmdev->ctrl_handler);
+		video_unregister_device(fmdev->radio_dev);
+		v4l2_device_unregister(&fmdev->v4l2_dev);
 		return -EBUSY;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 064/249] net: hns3: add a check to pointer in error_detected and slot_reset

[Sasha Levin]

From: Weihang Li <liweihang@hisilicon.com>

[ Upstream commit 661262bc3e0ecc9a1aed39c6b2a99766da2c22e2 ]

If we add a VF without loading hclgevf.ko and then there is a RAS error
occurs, PCIe AER will call error_detected and slot_reset of all functions,
and will get a NULL pointer when we check ad_dev->ops->handle_hw_ras_error.
This will cause a call trace and failures on handling of follow-up RAS
errors.

This patch check ae_dev and ad_dev->ops at first to solve above issues.

Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index cd59c0cc636a..5611b990ac34 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1916,9 +1916,9 @@ static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev,
 	if (state == pci_channel_io_perm_failure)
 		return PCI_ERS_RESULT_DISCONNECT;
 
-	if (!ae_dev) {
+	if (!ae_dev || !ae_dev->ops) {
 		dev_err(&pdev->dev,
-			"Can't recover - error happened during device init\n");
+			"Can't recover - error happened before device initialized\n");
 		return PCI_ERS_RESULT_NONE;
 	}
 
@@ -1937,6 +1937,9 @@ static pci_ers_result_t hns3_slot_reset(struct pci_dev *pdev)
 
 	dev_info(dev, "requesting reset due to PCI error\n");
 
+	if (!ae_dev || !ae_dev->ops)
+		return PCI_ERS_RESULT_NONE;
+
 	/* request the reset */
 	if (ae_dev->ops->reset_event) {
 		if (!ae_dev->override_pci_need_reset)
-- 
2.20.1

[PATCH AUTOSEL 5.2 065/249] net: hns3: set ops to null when unregister ad_dev

[Sasha Levin]

From: Weihang Li <liweihang@hisilicon.com>

[ Upstream commit 594a81b39525f0a17e92c2e0b167ae1400650380 ]

The hclge/hclgevf and hns3 module can be unloaded independently,
when hclge/hclgevf unloaded firstly, the ops of ae_dev should
be set to NULL, otherwise it will cause an use-after-free problem.

Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hnae3.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
index fa8b8506b120..738e01393b68 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c
@@ -251,6 +251,7 @@ void hnae3_unregister_ae_algo(struct hnae3_ae_algo *ae_algo)
 
 		ae_algo->ops->uninit_ae_dev(ae_dev);
 		hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+		ae_dev->ops = NULL;
 	}
 
 	list_del(&ae_algo->node);
@@ -351,6 +352,7 @@ void hnae3_unregister_ae_dev(struct hnae3_ae_dev *ae_dev)
 
 		ae_algo->ops->uninit_ae_dev(ae_dev);
 		hnae3_set_bit(ae_dev->flag, HNAE3_DEV_INITED_B, 0);
+		ae_dev->ops = NULL;
 	}
 
 	list_del(&ae_dev->node);
-- 
2.20.1

[PATCH AUTOSEL 5.2 066/249] cpupower : frequency-set -r option misses the last cpu in related cpu list

[Sasha Levin]

From: Abhishek Goel <huntbag@linux.vnet.ibm.com>

[ Upstream commit 04507c0a9385cc8280f794a36bfff567c8cc1042 ]

To set frequency on specific cpus using cpupower, following syntax can
be used :
cpupower -c #i frequency-set -f #f -r

While setting frequency using cpupower frequency-set command, if we use
'-r' option, it is expected to set frequency for all cpus related to
cpu #i. But it is observed to be missing the last cpu in related cpu
list. This patch fixes the problem.

Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/cpupower/utils/cpufreq-set.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
index f49bc4aa2a08..6ed82fba5aaa 100644
--- a/tools/power/cpupower/utils/cpufreq-set.c
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -305,6 +305,8 @@ int cmd_freq_set(int argc, char **argv)
 				bitmask_setbit(cpus_chosen, cpus->cpu);
 				cpus = cpus->next;
 			}
+			/* Set the last cpu in related cpus list */
+			bitmask_setbit(cpus_chosen, cpus->cpu);
 			cpufreq_put_related_cpus(cpus);
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 067/249] arm64: mm: make CONFIG_ZONE_DMA32 configurable

[Sasha Levin]

From: Miles Chen <miles.chen@mediatek.com>

[ Upstream commit 0c1f14ed12262f45a3af1d588e4d7bd12438b8f5 ]

This change makes CONFIG_ZONE_DMA32 defuly y and allows users
to overwrite it only when CONFIG_EXPERT=y.

For the SoCs that do not need CONFIG_ZONE_DMA32, this is the
first step to manage all available memory by a single
zone(normal zone) to reduce the overhead of multiple zones.

The change also fixes a build error when CONFIG_NUMA=y and
CONFIG_ZONE_DMA32=n.

arch/arm64/mm/init.c:195:17: error: use of undeclared identifier 'ZONE_DMA32'
                max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());

Change since v1:
1. only expose CONFIG_ZONE_DMA32 when CONFIG_EXPERT=y
2. remove redundant IS_ENABLED(CONFIG_ZONE_DMA32)

Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Kconfig   | 3 ++-
 arch/arm64/mm/init.c | 5 +++--
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 697ea0510729..cf5f1dafcf74 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -260,7 +260,8 @@ config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
 config ZONE_DMA32
-	def_bool y
+	bool "Support DMA32 zone" if EXPERT
+	default y
 
 config HAVE_GENERIC_GUP
 	def_bool y
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 749c9b269f08..f3c795278def 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -180,8 +180,9 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
 
-	if (IS_ENABLED(CONFIG_ZONE_DMA32))
-		max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
+#ifdef CONFIG_ZONE_DMA32
+	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(max_zone_dma_phys());
+#endif
 	max_zone_pfns[ZONE_NORMAL] = max;
 
 	free_area_init_nodes(max_zone_pfns);
-- 
2.20.1

[PATCH AUTOSEL 5.2 068/249] media: imx7-mipi-csis: Propagate the error if clock enabling fails

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 2b393f91c651c16d5c09f5c7aa689e58a79df34e ]

Currently the return value from clk_bulk_prepare_enable() is checked,
but it is not propagate it in the case of failure.

Fix it and also move the error message to the caller of
mipi_csis_clk_enable().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 19455f425416..7d7bdfdd852a 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -456,13 +456,9 @@ static void mipi_csis_set_params(struct csi_state *state)
 			MIPI_CSIS_CMN_CTRL_UPDATE_SHADOW_CTRL);
 }
 
-static void mipi_csis_clk_enable(struct csi_state *state)
+static int mipi_csis_clk_enable(struct csi_state *state)
 {
-	int ret;
-
-	ret = clk_bulk_prepare_enable(state->num_clks, state->clks);
-	if (ret < 0)
-		dev_err(state->dev, "failed to enable clocks\n");
+	return clk_bulk_prepare_enable(state->num_clks, state->clks);
 }
 
 static void mipi_csis_clk_disable(struct csi_state *state)
@@ -973,7 +969,11 @@ static int mipi_csis_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	mipi_csis_clk_enable(state);
+	ret = mipi_csis_clk_enable(state);
+	if (ret < 0) {
+		dev_err(state->dev, "failed to enable clocks: %d\n", ret);
+		return ret;
+	}
 
 	ret = devm_request_irq(dev, state->irq, mipi_csis_irq_handler,
 			       0, dev_name(dev), state);
-- 
2.20.1

[PATCH AUTOSEL 5.2 068/249] media: imx7-mipi-csis: Propagate the error if clock enabling fails

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit 2b393f91c651c16d5c09f5c7aa689e58a79df34e ]

Currently the return value from clk_bulk_prepare_enable() is checked,
but it is not propagate it in the case of failure.

Fix it and also move the error message to the caller of
mipi_csis_clk_enable().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 19455f425416..7d7bdfdd852a 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -456,13 +456,9 @@ static void mipi_csis_set_params(struct csi_state *state)
 			MIPI_CSIS_CMN_CTRL_UPDATE_SHADOW_CTRL);
 }
 
-static void mipi_csis_clk_enable(struct csi_state *state)
+static int mipi_csis_clk_enable(struct csi_state *state)
 {
-	int ret;
-
-	ret = clk_bulk_prepare_enable(state->num_clks, state->clks);
-	if (ret < 0)
-		dev_err(state->dev, "failed to enable clocks\n");
+	return clk_bulk_prepare_enable(state->num_clks, state->clks);
 }
 
 static void mipi_csis_clk_disable(struct csi_state *state)
@@ -973,7 +969,11 @@ static int mipi_csis_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	mipi_csis_clk_enable(state);
+	ret = mipi_csis_clk_enable(state);
+	if (ret < 0) {
+		dev_err(state->dev, "failed to enable clocks: %d\n", ret);
+		return ret;
+	}
 
 	ret = devm_request_irq(dev, state->irq, mipi_csis_irq_handler,
 			       0, dev_name(dev), state);
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.2 069/249] perf jvmti: Address gcc string overflow warning for strncpy()

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit 279ab04dbea1370d2eac0f854270369ccaef8a44 ]

We are getting false positive gcc warning when we compile with gcc9 (9.1.1):

     CC       jvmti/libjvmti.o
   In file included from /usr/include/string.h:494,
                    from jvmti/libjvmti.c:5:
   In function ‘strncpy’,
       inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3:
   /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
     106 |   return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
         |          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’:
   jvmti/libjvmti.c:165:26: note: length computed here
     165 |   size_t file_name_len = strlen(file_name);
         |                          ^~~~~~~~~~~~~~~~~
   cc1: all warnings being treated as errors

As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps
gcc silent.

Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190531131321.GB1281@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/jvmti/libjvmti.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/jvmti/libjvmti.c b/tools/perf/jvmti/libjvmti.c
index aea7b1fe85aa..c441a34cb1c0 100644
--- a/tools/perf/jvmti/libjvmti.c
+++ b/tools/perf/jvmti/libjvmti.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <linux/compiler.h>
+#include <linux/string.h>
 #include <sys/types.h>
 #include <stdio.h>
 #include <string.h>
@@ -162,8 +163,7 @@ copy_class_filename(const char * class_sign, const char * file_name, char * resu
 		result[i] = '\0';
 	} else {
 		/* fallback case */
-		size_t file_name_len = strlen(file_name);
-		strncpy(result, file_name, file_name_len < max_length ? file_name_len : max_length);
+		strlcpy(result, file_name, max_length);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 070/249] media: aspeed: change irq to threaded irq

[Sasha Levin]

From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

[ Upstream commit 12ae1c1bf5db2f33fcd9092a96f630291c4b181a ]

Differently from other Aspeed drivers, this driver calls clock
control APIs in interrupt context. Since ECLK is coupled with a
reset bit in clk-aspeed module, aspeed_clk_enable will make 10ms of
busy waiting delay for triggering the reset and it will eventually
disturb other drivers' interrupt handling. To fix this issue, this
commit changes this driver's irq to threaded irq so that the delay
can be happened in a thread context.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/aspeed-video.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 8144fe36ad48..76d7512c82a3 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1589,8 +1589,9 @@ static int aspeed_video_init(struct aspeed_video *video)
 		return -ENODEV;
 	}
 
-	rc = devm_request_irq(dev, irq, aspeed_video_irq, IRQF_SHARED,
-			      DEVICE_NAME, video);
+	rc = devm_request_threaded_irq(dev, irq, NULL, aspeed_video_irq,
+				       IRQF_ONESHOT | IRQF_SHARED, DEVICE_NAME,
+				       video);
 	if (rc < 0) {
 		dev_err(dev, "Unable to request IRQ %d\n", irq);
 		return rc;
-- 
2.20.1

[PATCH AUTOSEL 5.2 071/249] media: aspeed: fix a kernel warning on clk control

[Sasha Levin]

From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>

[ Upstream commit 9698ed4d4a2993ce54b9f7d71a2891e972caa117 ]

Video engine clock control can be double disabled and eventually
it causes a kernel warning with stack dump printing out like below:

[  515.540498] ------------[ cut here ]------------
[  515.545174] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:684 clk_core_unprepare+0x13c/0x170
[  515.553806] vclk-gate already unprepared
[  515.557841] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.568973] Hardware name: Generic DT based system
[  515.573777] Backtrace:
[  515.576272] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.583930]  r7:803a5614 r6:00000009 r5:00000000 r4:9d88fe1c
[  515.589712] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.597053] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.604557] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.612734]  r6:000002ac r5:8080befc r4:80a07008
[  515.617463] [<80116070>] (warn_slowpath_fmt) from [<803a5614>] (clk_core_unprepare+0x13c/0x170)
[  515.626167]  r3:8080cdf4 r2:8080bfc0
[  515.629834]  r7:98d682a8 r6:9d8a9200 r5:9e5151a0 r4:97abd620
[  515.635530] [<803a54d8>] (clk_core_unprepare) from [<803a76a4>] (clk_unprepare+0x34/0x3c)
[  515.643812]  r5:9e5151a0 r4:97abd620
[  515.647529] [<803a7670>] (clk_unprepare) from [<804f36ec>] (aspeed_video_off+0x38/0x50)
[  515.655539]  r5:9e5151a0 r4:9e504000
[  515.659242] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.668036]  r5:9e5044b0 r4:9e504000
[  515.671643] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.679999]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.685695] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.692914]  r5:9e51b608 r4:9d8a9200
[  515.696597] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.703315]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.711167] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.718596] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.726777]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.732466] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.740727] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.745840] ffa0:                                     00000000 76f18094 00000000 00000000
[  515.754122] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  515.762386] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  515.769097]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  515.777006]  r4:00000007
[  515.779558] ---[ end trace 12c04aadef8afbbb ]---
[  515.784176] ------------[ cut here ]------------
[  515.788817] WARNING: CPU: 0 PID: 1310 at drivers/clk/clk.c:825 clk_core_disable+0x18c/0x204
[  515.797161] eclk-gate already disabled
[  515.800916] CPU: 0 PID: 1310 Comm: obmc-ikvm Tainted: G        W         5.0.6-df66fbc97853fbba90a0bfa44de32f3d5f7602b4 #1
[  515.811945] Hardware name: Generic DT based system
[  515.816730] Backtrace:
[  515.819210] [<80107cdc>] (dump_backtrace) from [<80107f10>] (show_stack+0x20/0x24)
[  515.826782]  r7:803a5900 r6:00000009 r5:00000000 r4:9d88fe04
[  515.832454] [<80107ef0>] (show_stack) from [<80690184>] (dump_stack+0x20/0x28)
[  515.839687] [<80690164>] (dump_stack) from [<80116044>] (__warn.part.3+0xb4/0xdc)
[  515.847170] [<80115f90>] (__warn.part.3) from [<801160d8>] (warn_slowpath_fmt+0x6c/0x90)
[  515.855247]  r6:00000339 r5:8080befc r4:80a07008
[  515.859868] [<80116070>] (warn_slowpath_fmt) from [<803a5900>] (clk_core_disable+0x18c/0x204)
[  515.868385]  r3:8080cdd0 r2:8080c00c
[  515.871957]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:97abd560
[  515.877615] [<803a5774>] (clk_core_disable) from [<803a59a0>] (clk_core_disable_lock+0x28/0x34)
[  515.886301]  r7:98d682a8 r6:9d8a9200 r5:97abd560 r4:a0000013
[  515.891960] [<803a5978>] (clk_core_disable_lock) from [<803a7714>] (clk_disable+0x2c/0x30)
[  515.900216]  r5:9e5151a0 r4:9e515f60
[  515.903816] [<803a76e8>] (clk_disable) from [<804f36f8>] (aspeed_video_off+0x44/0x50)
[  515.911656] [<804f36b4>] (aspeed_video_off) from [<804f4358>] (aspeed_video_release+0x90/0x114)
[  515.920341]  r5:9e5044b0 r4:9e504000
[  515.923921] [<804f42c8>] (aspeed_video_release) from [<804d302c>] (v4l2_release+0xd4/0xe8)
[  515.932184]  r7:98d682a8 r6:9d087810 r5:9d8a9200 r4:9e504318
[  515.937851] [<804d2f58>] (v4l2_release) from [<80236454>] (__fput+0x98/0x1c4)
[  515.944980]  r5:9e51b608 r4:9d8a9200
[  515.948559] [<802363bc>] (__fput) from [<802365e8>] (____fput+0x18/0x1c)
[  515.955257]  r9:80a0700c r8:801011e4 r7:00000000 r6:80a64b9c r5:9d8e35a0 r4:9d8e38dc
[  515.963008] [<802365d0>] (____fput) from [<80131ca4>] (task_work_run+0x7c/0xa0)
[  515.970333] [<80131c28>] (task_work_run) from [<80106884>] (do_work_pending+0x4a8/0x578)
[  515.978421]  r7:801011e4 r6:80a07008 r5:9d88ffb0 r4:ffffe000
[  515.984086] [<801063dc>] (do_work_pending) from [<8010106c>] (slow_work_pending+0xc/0x20)
[  515.992247] Exception stack(0x9d88ffb0 to 0x9d88fff8)
[  515.997296] ffa0:                                     00000000 76f18094 00000000 00000000
[  516.005473] ffc0: 00000007 00176778 7eda4c20 00000006 00000000 00000000 48e20fa4 00000000
[  516.013642] ffe0: 00000002 7eda4b08 00000000 48f91efc 80000010 00000007
[  516.020257]  r10:00000000 r9:9d88e000 r8:801011e4 r7:00000006 r6:7eda4c20 r5:00176778
[  516.028072]  r4:00000007
[  516.030606] ---[ end trace 12c04aadef8afbbc ]---

To prevent this issue, this commit adds clock status checking
logic into the Aspeed video engine driver.

Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/aspeed-video.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 76d7512c82a3..de0f192afa8b 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -187,6 +187,7 @@ enum {
 	VIDEO_STREAMING,
 	VIDEO_FRAME_INPRG,
 	VIDEO_STOPPED,
+	VIDEO_CLOCKS_ON,
 };
 
 struct aspeed_video_addr {
@@ -483,19 +484,29 @@ static void aspeed_video_enable_mode_detect(struct aspeed_video *video)
 
 static void aspeed_video_off(struct aspeed_video *video)
 {
+	if (!test_bit(VIDEO_CLOCKS_ON, &video->flags))
+		return;
+
 	/* Disable interrupts */
 	aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
 
 	/* Turn off the relevant clocks */
 	clk_disable_unprepare(video->vclk);
 	clk_disable_unprepare(video->eclk);
+
+	clear_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
 
 static void aspeed_video_on(struct aspeed_video *video)
 {
+	if (test_bit(VIDEO_CLOCKS_ON, &video->flags))
+		return;
+
 	/* Turn on the relevant clocks */
 	clk_prepare_enable(video->eclk);
 	clk_prepare_enable(video->vclk);
+
+	set_bit(VIDEO_CLOCKS_ON, &video->flags);
 }
 
 static void aspeed_video_bufs_done(struct aspeed_video *video,
-- 
2.20.1

[PATCH AUTOSEL 5.2 072/249] net: stmmac: dwmac4: fix flow control issue

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit ee326fd01e79dfa42014d55931260b68b9fa3273 ]

Current dwmac4_flow_ctrl will not clear
GMAC_RX_FLOW_CTRL_RFE/GMAC_RX_FLOW_CTRL_RFE bits,
so MAC hw will keep flow control on although expecting
flow control off by ethtool. Add codes to fix it.

Fixes: 477286b53f55 ("stmmac: add GMAC4 core support")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 206170d0bf81..e3850938cf2f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -474,8 +474,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 	if (fc & FLOW_RX) {
 		pr_debug("\tReceive Flow-Control ON\n");
 		flow |= GMAC_RX_FLOW_CTRL_RFE;
-		writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
 	}
+	writel(flow, ioaddr + GMAC_RX_FLOW_CTRL);
+
 	if (fc & FLOW_TX) {
 		pr_debug("\tTransmit Flow-Control ON\n");
 
@@ -483,7 +484,7 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 			pr_debug("\tduplex mode: PAUSE %d\n", pause_time);
 
 		for (queue = 0; queue < tx_cnt; queue++) {
-			flow |= GMAC_TX_FLOW_CTRL_TFE;
+			flow = GMAC_TX_FLOW_CTRL_TFE;
 
 			if (duplex)
 				flow |=
@@ -491,6 +492,9 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex,
 
 			writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
 		}
+	} else {
+		for (queue = 0; queue < tx_cnt; queue++)
+			writel(0, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue));
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 073/249] net: stmmac: modify default value of tx-frames

[Sasha Levin]

From: Biao Huang <biao.huang@mediatek.com>

[ Upstream commit d2facb4b3983425f6776c24dd678a82dbe673773 ]

the default value of tx-frames is 25, it's too late when
passing tstamp to stack, then the ptp4l will fail:

ptp4l -i eth0 -f gPTP.cfg -m
ptp4l: selected /dev/ptp0 as PTP clock
ptp4l: port 1: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 0: INITIALIZING to LISTENING on INITIALIZE
ptp4l: port 1: link up
ptp4l: timed out while polling for tx timestamp
ptp4l: increasing tx_timestamp_timeout may correct this issue,
       but it is likely caused by a driver bug
ptp4l: port 1: send peer delay response failed
ptp4l: port 1: LISTENING to FAULTY on FAULT_DETECTED (FT_UNSPECIFIED)

ptp4l tests pass when changing the tx-frames from 25 to 1 with
ethtool -C option.
It should be fine to set tx-frames default value to 1, so ptp4l will pass
by default.

Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index ceb0d23f5041..c265cc5770e8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -251,7 +251,7 @@ struct stmmac_safety_stats {
 #define STMMAC_COAL_TX_TIMER	1000
 #define STMMAC_MAX_COAL_TX_TICK	100000
 #define STMMAC_TX_MAX_FRAMES	256
-#define STMMAC_TX_FRAMES	25
+#define STMMAC_TX_FRAMES	1
 
 /* Packets types */
 enum packets_types {
-- 
2.20.1

[PATCH AUTOSEL 5.2 074/249] crypto: inside-secure - do not rely on the hardware last bit for result descriptors

[Sasha Levin]

From: Antoine Tenart <antoine.tenart@bootlin.com>

[ Upstream commit 89332590427235680236b9470e851afc49b3caa1 ]

When performing a transformation the hardware is given result
descriptors to save the result data. Those result descriptors are
batched using a 'first' and a 'last' bit. There are cases were more
descriptors than needed are given to the engine, leading to the engine
only using some of them, and not setting the last bit on the last
descriptor we gave. This causes issues were the driver and the hardware
aren't in sync anymore about the number of result descriptors given (as
the driver do not give a pool of descriptor to use for any
transformation, but a pool of descriptors to use *per* transformation).

This patch fixes it by attaching the number of given result descriptors
to the requests, and by using this number instead of the 'last' bit
found on the descriptors to process them.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../crypto/inside-secure/safexcel_cipher.c    | 24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/crypto/inside-secure/safexcel_cipher.c b/drivers/crypto/inside-secure/safexcel_cipher.c
index de4be10b172f..ccacdcf07ffc 100644
--- a/drivers/crypto/inside-secure/safexcel_cipher.c
+++ b/drivers/crypto/inside-secure/safexcel_cipher.c
@@ -51,6 +51,8 @@ struct safexcel_cipher_ctx {
 
 struct safexcel_cipher_req {
 	enum safexcel_cipher_direction direction;
+	/* Number of result descriptors associated to the request */
+	unsigned int rdescs;
 	bool needs_inv;
 };
 
@@ -333,7 +335,10 @@ static int safexcel_handle_req_result(struct safexcel_crypto_priv *priv, int rin
 
 	*ret = 0;
 
-	do {
+	if (unlikely(!sreq->rdescs))
+		return 0;
+
+	while (sreq->rdescs--) {
 		rdesc = safexcel_ring_next_rptr(priv, &priv->ring[ring].rdr);
 		if (IS_ERR(rdesc)) {
 			dev_err(priv->dev,
@@ -346,7 +351,7 @@ static int safexcel_handle_req_result(struct safexcel_crypto_priv *priv, int rin
 			*ret = safexcel_rdesc_check_errors(priv, rdesc);
 
 		ndesc++;
-	} while (!rdesc->last_seg);
+	}
 
 	safexcel_complete(priv, ring);
 
@@ -501,6 +506,7 @@ static int safexcel_send_req(struct crypto_async_request *base, int ring,
 static int safexcel_handle_inv_result(struct safexcel_crypto_priv *priv,
 				      int ring,
 				      struct crypto_async_request *base,
+				      struct safexcel_cipher_req *sreq,
 				      bool *should_complete, int *ret)
 {
 	struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(base->tfm);
@@ -509,7 +515,10 @@ static int safexcel_handle_inv_result(struct safexcel_crypto_priv *priv,
 
 	*ret = 0;
 
-	do {
+	if (unlikely(!sreq->rdescs))
+		return 0;
+
+	while (sreq->rdescs--) {
 		rdesc = safexcel_ring_next_rptr(priv, &priv->ring[ring].rdr);
 		if (IS_ERR(rdesc)) {
 			dev_err(priv->dev,
@@ -522,7 +531,7 @@ static int safexcel_handle_inv_result(struct safexcel_crypto_priv *priv,
 			*ret = safexcel_rdesc_check_errors(priv, rdesc);
 
 		ndesc++;
-	} while (!rdesc->last_seg);
+	}
 
 	safexcel_complete(priv, ring);
 
@@ -564,7 +573,7 @@ static int safexcel_skcipher_handle_result(struct safexcel_crypto_priv *priv,
 
 	if (sreq->needs_inv) {
 		sreq->needs_inv = false;
-		err = safexcel_handle_inv_result(priv, ring, async,
+		err = safexcel_handle_inv_result(priv, ring, async, sreq,
 						 should_complete, ret);
 	} else {
 		err = safexcel_handle_req_result(priv, ring, async, req->src,
@@ -587,7 +596,7 @@ static int safexcel_aead_handle_result(struct safexcel_crypto_priv *priv,
 
 	if (sreq->needs_inv) {
 		sreq->needs_inv = false;
-		err = safexcel_handle_inv_result(priv, ring, async,
+		err = safexcel_handle_inv_result(priv, ring, async, sreq,
 						 should_complete, ret);
 	} else {
 		err = safexcel_handle_req_result(priv, ring, async, req->src,
@@ -633,6 +642,8 @@ static int safexcel_skcipher_send(struct crypto_async_request *async, int ring,
 		ret = safexcel_send_req(async, ring, sreq, req->src,
 					req->dst, req->cryptlen, 0, 0, req->iv,
 					commands, results);
+
+	sreq->rdescs = *results;
 	return ret;
 }
 
@@ -655,6 +666,7 @@ static int safexcel_aead_send(struct crypto_async_request *async, int ring,
 					req->cryptlen, req->assoclen,
 					crypto_aead_authsize(tfm), req->iv,
 					commands, results);
+	sreq->rdescs = *results;
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 075/249] net: fec: Do not use netdev messages too early

[Sasha Levin]

From: Fabio Estevam <festevam@gmail.com>

[ Upstream commit a19a0582363b9a5f8ba812f34f1b8df394898780 ]

When a valid MAC address is not found the current messages
are shown:

fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa

Since the network device has not been registered at this point, it is better
to use dev_err()/dev_info() instead, which will provide cleaner log
messages like these:

fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa

Tested on a imx6dl-pico-pi board.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 38f10f7dcbc3..831bb709e783 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1689,10 +1689,10 @@ static void fec_get_mac(struct net_device *ndev)
 	 */
 	if (!is_valid_ether_addr(iap)) {
 		/* Report it and use a random ethernet address instead */
-		netdev_err(ndev, "Invalid MAC address: %pM\n", iap);
+		dev_err(&fep->pdev->dev, "Invalid MAC address: %pM\n", iap);
 		eth_hw_addr_random(ndev);
-		netdev_info(ndev, "Using random MAC address: %pM\n",
-			    ndev->dev_addr);
+		dev_info(&fep->pdev->dev, "Using random MAC address: %pM\n",
+			 ndev->dev_addr);
 		return;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 076/249] net: axienet: Fix race condition causing TX hang

[Sasha Levin]

From: Robert Hancock <hancock@sedsystems.ca>

[ Upstream commit 7de44285c1f69ccfbe8be1d6a16fcd956681fee6 ]

It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in axienet_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.

To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 831967f6eff8..65c16772e589 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -615,6 +615,10 @@ static void axienet_start_xmit_done(struct net_device *ndev)
 
 	ndev->stats.tx_packets += packets;
 	ndev->stats.tx_bytes += size;
+
+	/* Matches barrier in axienet_start_xmit */
+	smp_mb();
+
 	netif_wake_queue(ndev);
 }
 
@@ -670,9 +674,19 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
 
 	if (axienet_check_tx_bd_space(lp, num_frag)) {
-		if (!netif_queue_stopped(ndev))
-			netif_stop_queue(ndev);
-		return NETDEV_TX_BUSY;
+		if (netif_queue_stopped(ndev))
+			return NETDEV_TX_BUSY;
+
+		netif_stop_queue(ndev);
+
+		/* Matches barrier in axienet_start_xmit_done */
+		smp_mb();
+
+		/* Space might have just been freed - check again */
+		if (axienet_check_tx_bd_space(lp, num_frag))
+			return NETDEV_TX_BUSY;
+
+		netif_wake_queue(ndev);
 	}
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 077/249] s390/qdio: handle PENDING state for QEBSM devices

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 04310324c6f482921c071444833e70fe861b73d9 ]

When a CQ-enabled device uses QEBSM for SBAL state inspection,
get_buf_states() can return the PENDING state for an Output Queue.
get_outbound_buffer_frontier() isn't prepared for this, and any PENDING
buffer will permanently stall all further completion processing on this
Queue.

This isn't a concern for non-QEBSM devices, as get_buf_states() for such
devices will manually turn PENDING buffers into EMPTY ones.

Fixes: 104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/cio/qdio_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 7b7620de2acd..730c4e68094b 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -736,6 +736,7 @@ static int get_outbound_buffer_frontier(struct qdio_q *q, unsigned int start)
 
 	switch (state) {
 	case SLSB_P_OUTPUT_EMPTY:
+	case SLSB_P_OUTPUT_PENDING:
 		/* the adapter got it */
 		DBF_DEV_EVENT(DBF_INFO, q->irq_ptr,
 			"out empty:%1d %02x", q->nr, count);
-- 
2.20.1

[PATCH AUTOSEL 5.2 078/249] RAS/CEC: Fix pfn insertion

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 6d8e294bf5f0e85c34e8b14b064e2965f53f38b0 ]

When inserting random PFNs for debugging the CEC through
(debugfs)/ras/cec/pfn, depending on the return value of pfn_set(),
multiple values get inserted per a single write.

That is because simple_attr_write() interprets a retval of 0 as
success and claims the whole input. However, pfn_set() returns the
cec_add_elem() value, which, if > 0 and smaller than the whole input
length, makes glibc continue issuing the write syscall until there's
input left:

  pfn_set
  simple_attr_write
  debugfs_attr_write
  full_proxy_write
  vfs_write
  ksys_write
  do_syscall_64
  entry_SYSCALL_64_after_hwframe

leading to those repeated calls.

Return 0 to fix that.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ras/cec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ras/cec.c b/drivers/ras/cec.c
index 673f8a128397..f5795adc5a6e 100644
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -369,7 +369,9 @@ static int pfn_set(void *data, u64 val)
 {
 	*(u64 *)data = val;
 
-	return cec_add_elem(val);
+	cec_add_elem(val);
+
+	return 0;
 }
 
 DEFINE_DEBUGFS_ATTRIBUTE(pfn_ops, u64_get, pfn_set, "0x%llx\n");
-- 
2.20.1

[PATCH AUTOSEL 5.2 079/249] net: sfp: add mutex to prevent concurrent state checks

[Sasha Levin]

From: Robert Hancock <hancock@sedsystems.ca>

[ Upstream commit 2158e856f56bb762ef90f3ec244d41a519826f75 ]

sfp_check_state can potentially be called by both a threaded IRQ handler
and delayed work. If it is concurrently called, it could result in
incorrect state management. Add a st_mutex to protect the state - this
lock gets taken outside of code that checks and handle state changes, and
the existing sm_mutex nests inside of it.

Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 71812be0ac64..b6efd2d41dce 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -186,10 +186,11 @@ struct sfp {
 	struct gpio_desc *gpio[GPIO_MAX];
 
 	bool attached;
+	struct mutex st_mutex;			/* Protects state */
 	unsigned int state;
 	struct delayed_work poll;
 	struct delayed_work timeout;
-	struct mutex sm_mutex;
+	struct mutex sm_mutex;			/* Protects state machine */
 	unsigned char sm_mod_state;
 	unsigned char sm_dev_state;
 	unsigned short sm_state;
@@ -1719,6 +1720,7 @@ static void sfp_check_state(struct sfp *sfp)
 {
 	unsigned int state, i, changed;
 
+	mutex_lock(&sfp->st_mutex);
 	state = sfp_get_state(sfp);
 	changed = state ^ sfp->state;
 	changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
@@ -1744,6 +1746,7 @@ static void sfp_check_state(struct sfp *sfp)
 		sfp_sm_event(sfp, state & SFP_F_LOS ?
 				SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
 	rtnl_unlock();
+	mutex_unlock(&sfp->st_mutex);
 }
 
 static irqreturn_t sfp_irq(int irq, void *data)
@@ -1774,6 +1777,7 @@ static struct sfp *sfp_alloc(struct device *dev)
 	sfp->dev = dev;
 
 	mutex_init(&sfp->sm_mutex);
+	mutex_init(&sfp->st_mutex);
 	INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
 	INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 080/249] netfilter: ipset: fix a missing check of nla_parse

[Sasha Levin]

From: Aditya Pakki <pakki001@umn.edu>

[ Upstream commit f4f5748bfec94cf418e49bf05f0c81a1b9ebc950 ]

When nla_parse fails, we should not use the results (the first
argument). The fix checks if it fails, and if so, returns its error code
upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_core.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c
index 3cdf171cd468..16afa0df4004 100644
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -1541,10 +1541,14 @@ call_ad(struct sock *ctnl, struct sk_buff *skb, struct ip_set *set,
 		memcpy(&errmsg->msg, nlh, nlh->nlmsg_len);
 		cmdattr = (void *)&errmsg->msg + min_len;
 
-		nla_parse_deprecated(cda, IPSET_ATTR_CMD_MAX, cmdattr,
-				     nlh->nlmsg_len - min_len,
-				     ip_set_adt_policy, NULL);
+		ret = nla_parse_deprecated(cda, IPSET_ATTR_CMD_MAX, cmdattr,
+					   nlh->nlmsg_len - min_len,
+					   ip_set_adt_policy, NULL);
 
+		if (ret) {
+			nlmsg_free(skb2);
+			return ret;
+		}
 		errline = nla_data(cda[IPSET_ATTR_LINENO]);
 
 		*errline = lineno;
-- 
2.20.1

[PATCH AUTOSEL 5.2 081/249] ipset: Fix memory accounting for hash types on resize

[Sasha Levin]

From: Stefano Brivio <sbrivio@redhat.com>

[ Upstream commit 11921796f4799ca9c61c4b22cc54d84aa69f8a35 ]

If a fresh array block is allocated during resize, the current in-memory
set size should be increased by the size of the block, not replaced by it.

Before the fix, adding entries to a hash set type, leading to a table
resize, caused an inconsistent memory size to be reported. This becomes
more obvious when swapping sets with similar sizes:

  # cat hash_ip_size.sh
  #!/bin/sh
  FAIL_RETRIES=10

  tries=0
  while [ ${tries} -lt ${FAIL_RETRIES} ]; do
  	ipset create t1 hash:ip
  	for i in `seq 1 4345`; do
  		ipset add t1 1.2.$((i / 255)).$((i % 255))
  	done
  	t1_init="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset create t2 hash:ip
  	for i in `seq 1 4360`; do
  		ipset add t2 1.2.$((i / 255)).$((i % 255))
  	done
  	t2_init="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset swap t1 t2
  	t1_swap="$(ipset list t1|sed -n 's/Size in memory: \(.*\)/\1/p')"
  	t2_swap="$(ipset list t2|sed -n 's/Size in memory: \(.*\)/\1/p')"

  	ipset destroy t1
  	ipset destroy t2
  	tries=$((tries + 1))

  	if [ ${t1_init} -lt 10000 ] || [ ${t2_init} -lt 10000 ]; then
  		echo "FAIL after ${tries} tries:"
  		echo "T1 size ${t1_init}, after swap ${t1_swap}"
  		echo "T2 size ${t2_init}, after swap ${t2_swap}"
  		exit 1
  	fi
  done
  echo "PASS"
  # echo -n 'func hash_ip4_resize +p' > /sys/kernel/debug/dynamic_debug/control
  # ./hash_ip_size.sh
  [ 2035.018673] attempt to resize set t1 from 10 to 11, t 00000000fe6551fa
  [ 2035.078583] set t1 resized from 10 (00000000fe6551fa) to 11 (00000000172a0163)
  [ 2035.080353] Table destroy by resize 00000000fe6551fa
  FAIL after 4 tries:
  T1 size 9064, after swap 71128
  T2 size 71128, after swap 9064

Reported-by: NOYB <JunkYardMail1@Frontier.com>
Fixes: 9e41f26a505c ("netfilter: ipset: Count non-static extension memory for userspace")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipset/ip_set_hash_gen.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h
index 10f619625abd..175f8fedcfaf 100644
--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -622,7 +622,7 @@ mtype_resize(struct ip_set *set, bool retried)
 					goto cleanup;
 				}
 				m->size = AHASH_INIT_SIZE;
-				extsize = ext_size(AHASH_INIT_SIZE, dsize);
+				extsize += ext_size(AHASH_INIT_SIZE, dsize);
 				RCU_INIT_POINTER(hbucket(t, key), m);
 			} else if (m->pos >= m->size) {
 				struct hbucket *ht;
-- 
2.20.1

[PATCH AUTOSEL 5.2 082/249] perf cs-etm: Properly set the value of 'old' and 'head' in snapshot mode

[Sasha Levin]

From: Mathieu Poirier <mathieu.poirier@linaro.org>

[ Upstream commit e45c48a9a4d20ebc7b639a62c3ef8f4b08007027 ]

This patch adds the necessary intelligence to properly compute the value
of 'old' and 'head' when operating in snapshot mode.  That way we can
get the latest information in the AUX buffer and be compatible with the
generic AUX ring buffer mechanic.

Tester notes:

> Leo, have you had the chance to test/review this one? Suzuki?

Sure.  I applied this patch on the perf/core branch (with latest
commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading
filename to the loop') and passed testing with below steps:

  # perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort &
  [1] 19097
  Bubble sorting array of 30000 elements

  # kill -USR2 19097
  # kill -USR2 19097
  # kill -USR2 19097
  [ perf record: Woken up 4 times to write data ]
  [ perf record: Captured and wrote 0.753 MB perf.data ]

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/arm/util/cs-etm.c | 127 +++++++++++++++++++++++++++++-
 1 file changed, 123 insertions(+), 4 deletions(-)

diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c
index 911426721170..0a278bbcaba6 100644
--- a/tools/perf/arch/arm/util/cs-etm.c
+++ b/tools/perf/arch/arm/util/cs-etm.c
@@ -31,6 +31,8 @@ struct cs_etm_recording {
 	struct auxtrace_record	itr;
 	struct perf_pmu		*cs_etm_pmu;
 	struct perf_evlist	*evlist;
+	int			wrapped_cnt;
+	bool			*wrapped;
 	bool			snapshot_mode;
 	size_t			snapshot_size;
 };
@@ -536,16 +538,131 @@ static int cs_etm_info_fill(struct auxtrace_record *itr,
 	return 0;
 }
 
-static int cs_etm_find_snapshot(struct auxtrace_record *itr __maybe_unused,
+static int cs_etm_alloc_wrapped_array(struct cs_etm_recording *ptr, int idx)
+{
+	bool *wrapped;
+	int cnt = ptr->wrapped_cnt;
+
+	/* Make @ptr->wrapped as big as @idx */
+	while (cnt <= idx)
+		cnt++;
+
+	/*
+	 * Free'ed in cs_etm_recording_free().  Using realloc() to avoid
+	 * cross compilation problems where the host's system supports
+	 * reallocarray() but not the target.
+	 */
+	wrapped = realloc(ptr->wrapped, cnt * sizeof(bool));
+	if (!wrapped)
+		return -ENOMEM;
+
+	wrapped[cnt - 1] = false;
+	ptr->wrapped_cnt = cnt;
+	ptr->wrapped = wrapped;
+
+	return 0;
+}
+
+static bool cs_etm_buffer_has_wrapped(unsigned char *buffer,
+				      size_t buffer_size, u64 head)
+{
+	u64 i, watermark;
+	u64 *buf = (u64 *)buffer;
+	size_t buf_size = buffer_size;
+
+	/*
+	 * We want to look the very last 512 byte (chosen arbitrarily) in
+	 * the ring buffer.
+	 */
+	watermark = buf_size - 512;
+
+	/*
+	 * @head is continuously increasing - if its value is equal or greater
+	 * than the size of the ring buffer, it has wrapped around.
+	 */
+	if (head >= buffer_size)
+		return true;
+
+	/*
+	 * The value of @head is somewhere within the size of the ring buffer.
+	 * This can be that there hasn't been enough data to fill the ring
+	 * buffer yet or the trace time was so long that @head has numerically
+	 * wrapped around.  To find we need to check if we have data at the very
+	 * end of the ring buffer.  We can reliably do this because mmap'ed
+	 * pages are zeroed out and there is a fresh mapping with every new
+	 * session.
+	 */
+
+	/* @head is less than 512 byte from the end of the ring buffer */
+	if (head > watermark)
+		watermark = head;
+
+	/*
+	 * Speed things up by using 64 bit transactions (see "u64 *buf" above)
+	 */
+	watermark >>= 3;
+	buf_size >>= 3;
+
+	/*
+	 * If we find trace data at the end of the ring buffer, @head has
+	 * been there and has numerically wrapped around at least once.
+	 */
+	for (i = watermark; i < buf_size; i++)
+		if (buf[i])
+			return true;
+
+	return false;
+}
+
+static int cs_etm_find_snapshot(struct auxtrace_record *itr,
 				int idx, struct auxtrace_mmap *mm,
-				unsigned char *data __maybe_unused,
+				unsigned char *data,
 				u64 *head, u64 *old)
 {
+	int err;
+	bool wrapped;
+	struct cs_etm_recording *ptr =
+			container_of(itr, struct cs_etm_recording, itr);
+
+	/*
+	 * Allocate memory to keep track of wrapping if this is the first
+	 * time we deal with this *mm.
+	 */
+	if (idx >= ptr->wrapped_cnt) {
+		err = cs_etm_alloc_wrapped_array(ptr, idx);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * Check to see if *head has wrapped around.  If it hasn't only the
+	 * amount of data between *head and *old is snapshot'ed to avoid
+	 * bloating the perf.data file with zeros.  But as soon as *head has
+	 * wrapped around the entire size of the AUX ring buffer it taken.
+	 */
+	wrapped = ptr->wrapped[idx];
+	if (!wrapped && cs_etm_buffer_has_wrapped(data, mm->len, *head)) {
+		wrapped = true;
+		ptr->wrapped[idx] = true;
+	}
+
 	pr_debug3("%s: mmap index %d old head %zu new head %zu size %zu\n",
 		  __func__, idx, (size_t)*old, (size_t)*head, mm->len);
 
-	*old = *head;
-	*head += mm->len;
+	/* No wrap has occurred, we can just use *head and *old. */
+	if (!wrapped)
+		return 0;
+
+	/*
+	 * *head has wrapped around - adjust *head and *old to pickup the
+	 * entire content of the AUX buffer.
+	 */
+	if (*head >= mm->len) {
+		*old = *head - mm->len;
+	} else {
+		*head += mm->len;
+		*old = *head - mm->len;
+	}
 
 	return 0;
 }
@@ -586,6 +703,8 @@ static void cs_etm_recording_free(struct auxtrace_record *itr)
 {
 	struct cs_etm_recording *ptr =
 			container_of(itr, struct cs_etm_recording, itr);
+
+	zfree(&ptr->wrapped);
 	free(ptr);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 082/249] perf cs-etm: Properly set the value of 'old' and 'head' in snapshot mode

[Sasha Levin]

From: Mathieu Poirier <mathieu.poirier@linaro.org>

[ Upstream commit e45c48a9a4d20ebc7b639a62c3ef8f4b08007027 ]

This patch adds the necessary intelligence to properly compute the value
of 'old' and 'head' when operating in snapshot mode.  That way we can
get the latest information in the AUX buffer and be compatible with the
generic AUX ring buffer mechanic.

Tester notes:

> Leo, have you had the chance to test/review this one? Suzuki?

Sure.  I applied this patch on the perf/core branch (with latest
commit 3e4fbf36c1e3 'perf augmented_raw_syscalls: Move reading
filename to the loop') and passed testing with below steps:

  # perf record -e cs_etm/@tmc_etr0/ -S -m,64 --per-thread ./sort &
  [1] 19097
  Bubble sorting array of 30000 elements

  # kill -USR2 19097
  # kill -USR2 19097
  # kill -USR2 19097
  [ perf record: Woken up 4 times to write data ]
  [ perf record: Captured and wrote 0.753 MB perf.data ]

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20190605161633.12245-1-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/arm/util/cs-etm.c | 127 +++++++++++++++++++++++++++++-
 1 file changed, 123 insertions(+), 4 deletions(-)

diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c
index 911426721170..0a278bbcaba6 100644
--- a/tools/perf/arch/arm/util/cs-etm.c
+++ b/tools/perf/arch/arm/util/cs-etm.c
@@ -31,6 +31,8 @@ struct cs_etm_recording {
 	struct auxtrace_record	itr;
 	struct perf_pmu		*cs_etm_pmu;
 	struct perf_evlist	*evlist;
+	int			wrapped_cnt;
+	bool			*wrapped;
 	bool			snapshot_mode;
 	size_t			snapshot_size;
 };
@@ -536,16 +538,131 @@ static int cs_etm_info_fill(struct auxtrace_record *itr,
 	return 0;
 }
 
-static int cs_etm_find_snapshot(struct auxtrace_record *itr __maybe_unused,
+static int cs_etm_alloc_wrapped_array(struct cs_etm_recording *ptr, int idx)
+{
+	bool *wrapped;
+	int cnt = ptr->wrapped_cnt;
+
+	/* Make @ptr->wrapped as big as @idx */
+	while (cnt <= idx)
+		cnt++;
+
+	/*
+	 * Free'ed in cs_etm_recording_free().  Using realloc() to avoid
+	 * cross compilation problems where the host's system supports
+	 * reallocarray() but not the target.
+	 */
+	wrapped = realloc(ptr->wrapped, cnt * sizeof(bool));
+	if (!wrapped)
+		return -ENOMEM;
+
+	wrapped[cnt - 1] = false;
+	ptr->wrapped_cnt = cnt;
+	ptr->wrapped = wrapped;
+
+	return 0;
+}
+
+static bool cs_etm_buffer_has_wrapped(unsigned char *buffer,
+				      size_t buffer_size, u64 head)
+{
+	u64 i, watermark;
+	u64 *buf = (u64 *)buffer;
+	size_t buf_size = buffer_size;
+
+	/*
+	 * We want to look the very last 512 byte (chosen arbitrarily) in
+	 * the ring buffer.
+	 */
+	watermark = buf_size - 512;
+
+	/*
+	 * @head is continuously increasing - if its value is equal or greater
+	 * than the size of the ring buffer, it has wrapped around.
+	 */
+	if (head >= buffer_size)
+		return true;
+
+	/*
+	 * The value of @head is somewhere within the size of the ring buffer.
+	 * This can be that there hasn't been enough data to fill the ring
+	 * buffer yet or the trace time was so long that @head has numerically
+	 * wrapped around.  To find we need to check if we have data at the very
+	 * end of the ring buffer.  We can reliably do this because mmap'ed
+	 * pages are zeroed out and there is a fresh mapping with every new
+	 * session.
+	 */
+
+	/* @head is less than 512 byte from the end of the ring buffer */
+	if (head > watermark)
+		watermark = head;
+
+	/*
+	 * Speed things up by using 64 bit transactions (see "u64 *buf" above)
+	 */
+	watermark >>= 3;
+	buf_size >>= 3;
+
+	/*
+	 * If we find trace data at the end of the ring buffer, @head has
+	 * been there and has numerically wrapped around at least once.
+	 */
+	for (i = watermark; i < buf_size; i++)
+		if (buf[i])
+			return true;
+
+	return false;
+}
+
+static int cs_etm_find_snapshot(struct auxtrace_record *itr,
 				int idx, struct auxtrace_mmap *mm,
-				unsigned char *data __maybe_unused,
+				unsigned char *data,
 				u64 *head, u64 *old)
 {
+	int err;
+	bool wrapped;
+	struct cs_etm_recording *ptr =
+			container_of(itr, struct cs_etm_recording, itr);
+
+	/*
+	 * Allocate memory to keep track of wrapping if this is the first
+	 * time we deal with this *mm.
+	 */
+	if (idx >= ptr->wrapped_cnt) {
+		err = cs_etm_alloc_wrapped_array(ptr, idx);
+		if (err)
+			return err;
+	}
+
+	/*
+	 * Check to see if *head has wrapped around.  If it hasn't only the
+	 * amount of data between *head and *old is snapshot'ed to avoid
+	 * bloating the perf.data file with zeros.  But as soon as *head has
+	 * wrapped around the entire size of the AUX ring buffer it taken.
+	 */
+	wrapped = ptr->wrapped[idx];
+	if (!wrapped && cs_etm_buffer_has_wrapped(data, mm->len, *head)) {
+		wrapped = true;
+		ptr->wrapped[idx] = true;
+	}
+
 	pr_debug3("%s: mmap index %d old head %zu new head %zu size %zu\n",
 		  __func__, idx, (size_t)*old, (size_t)*head, mm->len);
 
-	*old = *head;
-	*head += mm->len;
+	/* No wrap has occurred, we can just use *head and *old. */
+	if (!wrapped)
+		return 0;
+
+	/*
+	 * *head has wrapped around - adjust *head and *old to pickup the
+	 * entire content of the AUX buffer.
+	 */
+	if (*head >= mm->len) {
+		*old = *head - mm->len;
+	} else {
+		*head += mm->len;
+		*old = *head - mm->len;
+	}
 
 	return 0;
 }
@@ -586,6 +703,8 @@ static void cs_etm_recording_free(struct auxtrace_record *itr)
 {
 	struct cs_etm_recording *ptr =
 			container_of(itr, struct cs_etm_recording, itr);
+
+	zfree(&ptr->wrapped);
 	free(ptr);
 }
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.2 083/249] perf test 6: Fix missing kvm module load for s390

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 53fe307dfd309e425b171f6272d64296a54f4dff ]

Command

   # perf test -Fv 6

fails with error

   running test 100 'kvm-s390:kvm_s390_create_vm' failed to parse
    event 'kvm-s390:kvm_s390_create_vm', err -1, str 'unknown tracepoint'
    event syntax error: 'kvm-s390:kvm_s390_create_vm'
                         \___ unknown tracepoint

when the kvm module is not loaded or not built in.

Fix this by adding a valid function which tests if the module
is loaded. Loaded modules (or builtin KVM support) have a
directory named
  /sys/kernel/debug/tracing/events/kvm-s390
for this tracepoint.

Check for existence of this directory.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190604053504.43073-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/parse-events.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 4a69c07f4101..8f3c80e13584 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -18,6 +18,32 @@
 #define PERF_TP_SAMPLE_TYPE (PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | \
 			     PERF_SAMPLE_CPU | PERF_SAMPLE_PERIOD)
 
+#if defined(__s390x__)
+/* Return true if kvm module is available and loaded. Test this
+ * and retun success when trace point kvm_s390_create_vm
+ * exists. Otherwise this test always fails.
+ */
+static bool kvm_s390_create_vm_valid(void)
+{
+	char *eventfile;
+	bool rc = false;
+
+	eventfile = get_events_file("kvm-s390");
+
+	if (eventfile) {
+		DIR *mydir = opendir(eventfile);
+
+		if (mydir) {
+			rc = true;
+			closedir(mydir);
+		}
+		put_events_file(eventfile);
+	}
+
+	return rc;
+}
+#endif
+
 static int test__checkevent_tracepoint(struct perf_evlist *evlist)
 {
 	struct perf_evsel *evsel = perf_evlist__first(evlist);
@@ -1642,6 +1668,7 @@ static struct evlist_test test__events[] = {
 	{
 		.name  = "kvm-s390:kvm_s390_create_vm",
 		.check = test__checkevent_tracepoint,
+		.valid = kvm_s390_create_vm_valid,
 		.id    = 100,
 	},
 #endif
-- 
2.20.1

[PATCH AUTOSEL 5.2 084/249] perf report: Fix OOM error in TUI mode on s390

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 8a07aa4e9b7b0222129c07afff81634a884b2866 ]

Debugging a OOM error using the TUI interface revealed this issue
on s390:

[tmricht@m83lp54 perf]$ cat /proc/kallsyms |sort
....
00000001119b7158 B radix_tree_node_cachep
00000001119b8000 B __bss_stop
00000001119b8000 B _end
000003ff80002850 t autofs_mount	[autofs4]
000003ff80002868 t autofs_show_options	[autofs4]
000003ff80002a98 t autofs_evict_inode	[autofs4]
....

There is a huge gap between the last kernel symbol
__bss_stop/_end and the first kernel module symbol
autofs_mount (from autofs4 module).

After reading the kernel symbol table via functions:

 dso__load()
 +--> dso__load_kernel_sym()
      +--> dso__load_kallsyms()
	   +--> __dso_load_kallsyms()
	        +--> symbols__fixup_end()

the symbol __bss_stop has a start address of 1119b8000 and
an end address of 3ff80002850, as can be seen by this debug statement:

  symbols__fixup_end __bss_stop start:0x1119b8000 end:0x3ff80002850

The size of symbol __bss_stop is 0x3fe6e64a850 bytes!
It is the last kernel symbol and fills up the space until
the first kernel module symbol.

This size kills the TUI interface when executing the following
code:

  process_sample_event()
    hist_entry_iter__add()
      hist_iter__report_callback()
        hist_entry__inc_addr_samples()
          symbol__inc_addr_samples(symbol = __bss_stop)
            symbol__cycles_hist()
               annotated_source__alloc_histograms(...,
				                symbol__size(sym),
		                                ...)

This function allocates memory to save sample histograms.
The symbol_size() marco is defined as sym->end - sym->start, which
results in above value of 0x3fe6e64a850 bytes and
the call to calloc() in annotated_source__alloc_histograms() fails.

The histgram memory allocation might fail, make this failure
no-fatal and continue processing.

Output before:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
					      -i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
  __symbol__inc_addr_samples(875): ENOMEM! sym->name=__bss_stop,
		start=0x1119b8000, addr=0x2aa0005eb08, end=0x3ff80002850,
		func: 0
problem adding hist entry, skipping event
0x938b8 [0x8]: failed to process type: 68 [Cannot allocate memory]
[tmricht@m83lp54 perf]$

Output after:
[tmricht@m83lp54 perf]$ ./perf --debug stderr=1 report -vvvvv \
					      -i ~/slow.data 2>/tmp/2
[tmricht@m83lp54 perf]$ tail -5 /tmp/2
   symbol__inc_addr_samples map:0x1597830 start:0x110730000 end:0x3ff80002850
   symbol__hists notes->src:0x2aa2a70 nr_hists:1
   symbol__inc_addr_samples sym:unlink_anon_vmas src:0x2aa2a70
   __symbol__inc_addr_samples: addr=0x11094c69e
   0x11094c670 unlink_anon_vmas: period++ [addr: 0x11094c69e, 0x2e, evidx=0]
   	=> nr_samples: 1, period: 526008
[tmricht@m83lp54 perf]$

There is no error about failed memory allocation and the TUI interface
shows all entries.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/90cb5607-3e12-5167-682d-978eba7dafa8@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/annotate.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index 79db038b56f2..c8ce13419d9b 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -931,9 +931,8 @@ static int symbol__inc_addr_samples(struct symbol *sym, struct map *map,
 	if (sym == NULL)
 		return 0;
 	src = symbol__hists(sym, evsel->evlist->nr_entries);
-	if (src == NULL)
-		return -ENOMEM;
-	return __symbol__inc_addr_samples(sym, map, src, evsel->idx, addr, sample);
+	return (src) ?  __symbol__inc_addr_samples(sym, map, src, evsel->idx,
+						   addr, sample) : 0;
 }
 
 static int symbol__account_cycles(u64 addr, u64 start,
-- 
2.20.1

[PATCH AUTOSEL 5.2 085/249] selftests/bpf : clean up feature/ when make clean

[Sasha Levin]

From: Hechao Li <hechaol@fb.com>

[ Upstream commit 89cceaa939171fafa153d4bf637b39e396bbd785 ]

An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:

$ cd tools/testing/selftests/bpf
$ make clean && make CC=<Path to GCC 4.8.5>
$ make clean && make CC=<Path to GCC 7.x>

The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.

v2: Rephrase the commit message.

Signed-off-by: Hechao Li <hechaol@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/Makefile | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index e36356e2377e..1c9511262947 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -275,4 +275,5 @@ $(OUTPUT)/verifier/tests.h: $(VERIFIER_TESTS_DIR) $(VERIFIER_TEST_FILES)
 		 ) > $(VERIFIER_TESTS_H))
 
 EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(ALU32_BUILD_DIR) \
-	$(VERIFIER_TESTS_H) $(PROG_TESTS_H) $(MAP_TESTS_H)
+	$(VERIFIER_TESTS_H) $(PROG_TESTS_H) $(MAP_TESTS_H) \
+	feature
-- 
2.20.1

[PATCH AUTOSEL 5.2 086/249] irqchip/meson-gpio: Add support for Meson-G12A SoC

[Sasha Levin]

From: Xingyu Chen <xingyu.chen@amlogic.com>

[ Upstream commit c64a9e804ccf86eb202bfd1c6a8c5233c75a0431 ]

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-meson-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 8eb92eb98f54..dcdc23b9dce6 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -60,6 +60,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
+	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ }
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 086/249] irqchip/meson-gpio: Add support for Meson-G12A SoC

[Sasha Levin]

From: Xingyu Chen <xingyu.chen@amlogic.com>

[ Upstream commit c64a9e804ccf86eb202bfd1c6a8c5233c75a0431 ]

The Meson-G12A SoC uses the same GPIO interrupt controller IP block as the
other Meson SoCs, A totle of 100 pins can be spied on, which is the sum of:

- 223:100 undefined (no interrupt)
- 99:97   3 pins on bank GPIOE
- 96:77   20 pins on bank GPIOX
- 76:61   16 pins on bank GPIOA
- 60:53   8 pins on bank GPIOC
- 52:37   16 pins on bank BOOT
- 36:28   9 pins on bank GPIOH
- 27:12   16 pins on bank GPIOZ
- 11:0    12 pins in the AO domain

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/irqchip/irq-meson-gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 8eb92eb98f54..dcdc23b9dce6 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -60,6 +60,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
+	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ }
 };
 
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 5.2 087/249] media: uvcvideo: Fix access to uninitialized fields on probe error

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit 11a087f484bf15ff65f0a9f277aa5a61fd07ed2a ]

We need to check whether this work we are canceling actually is
initialized.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+2e1ef9188251d9cc7944@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_ctrl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index 26163a5bde7d..e399b9fad757 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -2345,7 +2345,9 @@ void uvc_ctrl_cleanup_device(struct uvc_device *dev)
 	struct uvc_entity *entity;
 	unsigned int i;
 
-	cancel_work_sync(&dev->async_ctrl.work);
+	/* Can be uninitialized if we are aborting on probe error. */
+	if (dev->async_ctrl.work.func)
+		cancel_work_sync(&dev->async_ctrl.work);
 
 	/* Free controls and control mappings for all entities. */
 	list_for_each_entry(entity, &dev->entities, list) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 088/249] media: fdp1: Support M3N and E3 platforms

[Sasha Levin]

From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

[ Upstream commit 4e8c120de9268fc26f583268b9d22e7d37c4595f ]

New Gen3 R-Car platforms incorporate the FDP1 with an updated version
register. No code change is required to support these targets, but they
will currently report an error stating that the device can not be
identified.

Update the driver to match against the new device types.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar_fdp1.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c
index 6a90bc4c476e..b8615a288e2b 100644
--- a/drivers/media/platform/rcar_fdp1.c
+++ b/drivers/media/platform/rcar_fdp1.c
@@ -257,6 +257,8 @@ MODULE_PARM_DESC(debug, "activate debug info");
 #define FD1_IP_H3_ES1			0x02010101
 #define FD1_IP_M3W			0x02010202
 #define FD1_IP_H3			0x02010203
+#define FD1_IP_M3N			0x02010204
+#define FD1_IP_E3			0x02010205
 
 /* LUTs */
 #define FD1_LUT_DIF_ADJ			0x1000
@@ -2365,6 +2367,12 @@ static int fdp1_probe(struct platform_device *pdev)
 	case FD1_IP_H3:
 		dprintk(fdp1, "FDP1 Version R-Car H3\n");
 		break;
+	case FD1_IP_M3N:
+		dprintk(fdp1, "FDP1 Version R-Car M3N\n");
+		break;
+	case FD1_IP_E3:
+		dprintk(fdp1, "FDP1 Version R-Car E3\n");
+		break;
 	default:
 		dev_err(fdp1->dev, "FDP1 Unidentifiable (0x%08x)\n",
 			hw_version);
-- 
2.20.1

[PATCH AUTOSEL 5.2 089/249] iommu: Fix a leak in iommu_insert_resv_region

[Sasha Levin]

From: Eric Auger <eric.auger@redhat.com>

[ Upstream commit ad0834dedaa15c3a176f783c0373f836e44b4700 ]

In case we expand an existing region, we unlink
this latter and insert the larger one. In
that case we should free the original region after
the insertion. Also we can immediately return.

Fixes: 6c65fb318e8b ("iommu: iommu_get_group_resv_regions")

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iommu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 9f0a2844371c..30db41e9f15c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -225,18 +225,21 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 			pos = pos->next;
 		} else if ((start >= a) && (end <= b)) {
 			if (new->type == type)
-				goto done;
+				return 0;
 			else
 				pos = pos->next;
 		} else {
 			if (new->type == type) {
 				phys_addr_t new_start = min(a, start);
 				phys_addr_t new_end = max(b, end);
+				int ret;
 
 				list_del(&entry->list);
 				entry->start = new_start;
 				entry->length = new_end - new_start + 1;
-				iommu_insert_resv_region(entry, regions);
+				ret = iommu_insert_resv_region(entry, regions);
+				kfree(entry);
+				return ret;
 			} else {
 				pos = pos->next;
 			}
@@ -249,7 +252,6 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 		return -ENOMEM;
 
 	list_add_tail(&region->list, pos);
-done:
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 089/249] iommu: Fix a leak in iommu_insert_resv_region

[Sasha Levin]

From: Eric Auger <eric.auger@redhat.com>

[ Upstream commit ad0834dedaa15c3a176f783c0373f836e44b4700 ]

In case we expand an existing region, we unlink
this latter and insert the larger one. In
that case we should free the original region after
the insertion. Also we can immediately return.

Fixes: 6c65fb318e8b ("iommu: iommu_get_group_resv_regions")

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/iommu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 9f0a2844371c..30db41e9f15c 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -225,18 +225,21 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 			pos = pos->next;
 		} else if ((start >= a) && (end <= b)) {
 			if (new->type == type)
-				goto done;
+				return 0;
 			else
 				pos = pos->next;
 		} else {
 			if (new->type == type) {
 				phys_addr_t new_start = min(a, start);
 				phys_addr_t new_end = max(b, end);
+				int ret;
 
 				list_del(&entry->list);
 				entry->start = new_start;
 				entry->length = new_end - new_start + 1;
-				iommu_insert_resv_region(entry, regions);
+				ret = iommu_insert_resv_region(entry, regions);
+				kfree(entry);
+				return ret;
 			} else {
 				pos = pos->next;
 			}
@@ -249,7 +252,6 @@ static int iommu_insert_resv_region(struct iommu_resv_region *new,
 		return -ENOMEM;
 
 	list_add_tail(&region->list, pos);
-done:
 	return 0;
 }
 
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.2 090/249] gpio: omap: fix lack of irqstatus_raw0 for OMAP4

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 64ea3e9094a1f13b96c33244a3fb3a0f45690bd2 ]

Commit 384ebe1c2849 ("gpio/omap: Add DT support to GPIO driver") added
the register definition tables to the gpio-omap driver. Subsequently to
that commit, commit 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx()
checks from *_runtime_resume()") added definitions for irqstatus_raw*
registers to the legacy OMAP4 definitions, but missed the DT
definitions.

This causes an unintentional change of behaviour for the 1.101 errata
workaround on OMAP4 platforms. Fix this oversight.

Fixes: 4e962e8998cc ("gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume()")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 9276ef616430..7632c98aa3a4 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1453,6 +1453,8 @@ static struct omap_gpio_reg_offs omap4_gpio_regs = {
 	.clr_dataout =		OMAP4_GPIO_CLEARDATAOUT,
 	.irqstatus =		OMAP4_GPIO_IRQSTATUS0,
 	.irqstatus2 =		OMAP4_GPIO_IRQSTATUS1,
+	.irqstatus_raw0 =	OMAP4_GPIO_IRQSTATUSRAW0,
+	.irqstatus_raw1 =	OMAP4_GPIO_IRQSTATUSRAW1,
 	.irqenable =		OMAP4_GPIO_IRQSTATUSSET0,
 	.irqenable2 =		OMAP4_GPIO_IRQSTATUSSET1,
 	.set_irqenable =	OMAP4_GPIO_IRQSTATUSSET0,
-- 
2.20.1

[PATCH AUTOSEL 5.2 091/249] gpio: omap: ensure irq is enabled before wakeup

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit c859e0d479b3b4f6132fc12637c51e01492f31f6 ]

Documentation states:

  NOTE: There must be a correlation between the wake-up enable and
  interrupt-enable registers. If a GPIO pin has a wake-up configured
  on it, it must also have the corresponding interrupt enabled (on
  one of the two interrupt lines).

Ensure that this condition is always satisfied by enabling the detection
events after enabling the interrupt, and disabling the detection before
disabling the interrupt.  This ensures interrupt/wakeup events can not
happen until both the wakeup and interrupt enables correlate.

If we do any clearing, clear between the interrupt enable/disable and
trigger setting.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 7632c98aa3a4..746aa9caf934 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -829,9 +829,9 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
 	bank->irq_usage &= ~(BIT(offset));
-	omap_set_gpio_irqenable(bank, offset, 0);
-	omap_clear_gpio_irqstatus(bank, offset);
 	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_clear_gpio_irqstatus(bank, offset);
+	omap_set_gpio_irqenable(bank, offset, 0);
 	if (!LINE_USED(bank->mod_usage, offset))
 		omap_clear_gpio_debounce(bank, offset);
 	omap_disable_gpio_module(bank, offset);
@@ -867,8 +867,8 @@ static void omap_gpio_mask_irq(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
-	omap_set_gpio_irqenable(bank, offset, 0);
 	omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+	omap_set_gpio_irqenable(bank, offset, 0);
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
 }
 
@@ -880,9 +880,6 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&bank->lock, flags);
-	if (trigger)
-		omap_set_gpio_triggering(bank, offset, trigger);
-
 	omap_set_gpio_irqenable(bank, offset, 1);
 
 	/*
@@ -890,9 +887,13 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
 	 * is cleared, thus after the handler has run. OMAP4 needs this done
 	 * after enabing the interrupt to clear the wakeup status.
 	 */
-	if (bank->level_mask & BIT(offset))
+	if (bank->regs->leveldetect0 && bank->regs->wkup_en &&
+	    trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
 		omap_clear_gpio_irqstatus(bank, offset);
 
+	if (trigger)
+		omap_set_gpio_triggering(bank, offset, trigger);
+
 	raw_spin_unlock_irqrestore(&bank->lock, flags);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 092/249] regmap: fix bulk writes on paged registers

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit db057679de3e9e6a03c1bcd5aee09b0d25fd9f5b ]

On buses like SlimBus and SoundWire which does not support
gather_writes yet in regmap, A bulk write on paged register
would be silently ignored after programming page.
This is because local variable 'ret' value in regmap_raw_write_impl()
gets reset to 0 once page register is written successfully and the
code below checks for 'ret' value to be -ENOTSUPP before linearising
the write buffer to send to bus->write().

Fix this by resetting the 'ret' value to -ENOTSUPP in cases where
gather_writes() is not supported or single register write is
not possible.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index f1025452bb39..19f57ccfbe1d 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1637,6 +1637,8 @@ static int _regmap_raw_write_impl(struct regmap *map, unsigned int reg,
 					     map->format.reg_bytes +
 					     map->format.pad_bytes,
 					     val, val_len);
+	else
+		ret = -ENOTSUPP;
 
 	/* If that didn't work fall back on linearising by hand. */
 	if (ret == -ENOTSUPP) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 093/249] gpio: omap: Fix lost edge wake-up interrupts

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a522f1d0c381c42f3ace13b8bbeeccabdd6d2e5c ]

If an edge interrupt triggers while entering idle just before we save
GPIO datain register to saved_datain, the triggered GPIO will not be
noticed on wake-up. This is because the saved_datain and GPIO datain
are the same on wake-up in omap_gpio_unidle(). Let's fix this by
ignoring any pending edge interrupts for saved_datain.

This issue affects only idle states where the GPIO module internal
wake-up path is operational. For deeper idle states where the GPIO
module gets powered off, Linux generic wakeirqs must be used for
the padconf wake-up events with pinctrl-single driver. For examples,
please see "interrupts-extended" dts usage in many drivers.

This issue can be somewhat easily reproduced by pinging an idle system
with smsc911x Ethernet interface configured IRQ_TYPE_EDGE_FALLING. At
some point the smsc911x interrupts will just stop triggering. Also if
WLCORE WLAN is used with EDGE interrupt like it's documentation specifies,
we can see lost interrupts without this patch.

Note that in the long run we may be able to cancel entering idle by
returning an error in gpio_omap_cpu_notifier() on pending interrupts.
But let's fix the bug first.

Also note that because of the recent clean-up efforts this patch does
not apply directly to older kernels. This does fix a long term issue
though, and can be backported as needed.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-omap.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 746aa9caf934..8591c410ecaa 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1275,13 +1275,23 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context)
 {
 	struct device *dev = bank->chip.parent;
 	void __iomem *base = bank->base;
-	u32 nowake;
+	u32 mask, nowake;
 
 	bank->saved_datain = readl_relaxed(base + bank->regs->datain);
 
 	if (!bank->enabled_non_wakeup_gpios)
 		goto update_gpio_context_count;
 
+	/* Check for pending EDGE_FALLING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect;
+	mask &= ~bank->context.risingdetect;
+	bank->saved_datain |= mask;
+
+	/* Check for pending EDGE_RISING, ignore EDGE_BOTH */
+	mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect;
+	mask &= ~bank->context.fallingdetect;
+	bank->saved_datain &= ~mask;
+
 	if (!may_lose_context)
 		goto update_gpio_context_count;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 094/249] media: davinci: vpif_capture: fix memory leak in vpif_probe()

[Sasha Levin]

From: Young Xiao <92siuyang@gmail.com>

[ Upstream commit 64f883cd98c6d43013fb0cea788b63e50ebc068c ]

If vpif_probe() fails on v4l2_device_register() and vpif_probe_complete(),
then memory allocated at initialize_vpif() for global vpif_obj.dev[i]
become unreleased.

The patch adds deallocation of vpif_obj.dev[i] on the error path.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/davinci/vpif_capture.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
index 61809d2050fa..f0f7ef638c56 100644
--- a/drivers/media/platform/davinci/vpif_capture.c
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -1376,6 +1376,14 @@ static int initialize_vpif(void)
 	return err;
 }
 
+static inline void free_vpif_objs(void)
+{
+	int i;
+
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++)
+		kfree(vpif_obj.dev[i]);
+}
+
 static int vpif_async_bound(struct v4l2_async_notifier *notifier,
 			    struct v4l2_subdev *subdev,
 			    struct v4l2_async_subdev *asd)
@@ -1645,7 +1653,7 @@ static __init int vpif_probe(struct platform_device *pdev)
 	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
 	if (err) {
 		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
-		goto cleanup;
+		goto vpif_free;
 	}
 
 	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) {
@@ -1692,7 +1700,9 @@ static __init int vpif_probe(struct platform_device *pdev)
 				  "registered sub device %s\n",
 				   subdevdata->name);
 		}
-		vpif_probe_complete();
+		err = vpif_probe_complete();
+		if (err)
+			goto probe_subdev_out;
 	} else {
 		vpif_obj.notifier.ops = &vpif_async_ops;
 		err = v4l2_async_notifier_register(&vpif_obj.v4l2_dev,
@@ -1711,6 +1721,8 @@ static __init int vpif_probe(struct platform_device *pdev)
 	kfree(vpif_obj.sd);
 vpif_unregister:
 	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+vpif_free:
+	free_vpif_objs();
 cleanup:
 	v4l2_async_notifier_cleanup(&vpif_obj.notifier);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 095/249] bpf: silence warning messages in core

[Sasha Levin]

From: Valdis Klētnieks <valdis.kletnieks@vt.edu>

[ Upstream commit aee450cbe482a8c2f6fa5b05b178ef8b8ff107ca ]

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/bpf/Makefile b/kernel/bpf/Makefile
index 4c2fa3ac56f6..29d781061cd5 100644
--- a/kernel/bpf/Makefile
+++ b/kernel/bpf/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y := core.o
+CFLAGS_core.o += $(call cc-disable-warning, override-init)
 
 obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o inode.o helpers.o tnum.o
 obj-$(CONFIG_BPF_SYSCALL) += hashtab.o arraymap.o percpu_freelist.o bpf_lru_list.o lpm_trie.o map_in_map.o
-- 
2.20.1

[PATCH AUTOSEL 5.2 096/249] media: s5p-mfc: fix reading min scratch buffer size on MFC v6/v7

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit be22203aec440c1761ce8542c2636ac6c8951e3a ]

MFC v6 and v7 has no register to read min scratch buffer size, so it has
to be read conditionally only if hardware supports it. This fixes following
NULL pointer exception on SoCs with MFC v6/v7:

8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = f25837f9
[00000000] *pgd=bd93d835
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex ecdh_generic ecc
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at s5p_mfc_get_min_scratch_buf_size+0x30/0x3c
LR is at s5p_mfc_get_min_scratch_buf_size+0x28/0x3c
...
[<c074f998>] (s5p_mfc_get_min_scratch_buf_size) from [<c0745bc0>] (s5p_mfc_irq+0x814/0xa5c)
[<c0745bc0>] (s5p_mfc_irq) from [<c019a218>] (__handle_irq_event_percpu+0x64/0x3f8)
[<c019a218>] (__handle_irq_event_percpu) from [<c019a5d8>] (handle_irq_event_percpu+0x2c/0x7c)
[<c019a5d8>] (handle_irq_event_percpu) from [<c019a660>] (handle_irq_event+0x38/0x5c)
[<c019a660>] (handle_irq_event) from [<c019ebc4>] (handle_fasteoi_irq+0xc4/0x180)
[<c019ebc4>] (handle_fasteoi_irq) from [<c0199270>] (generic_handle_irq+0x24/0x34)
[<c0199270>] (generic_handle_irq) from [<c0199888>] (__handle_domain_irq+0x7c/0xec)
[<c0199888>] (__handle_domain_irq) from [<c04ac298>] (gic_handle_irq+0x58/0x9c)
[<c04ac298>] (gic_handle_irq) from [<c0101ab0>] (__irq_svc+0x70/0xb0)
Exception stack(0xe73ddc60 to 0xe73ddca8)
...
[<c0101ab0>] (__irq_svc) from [<c01967d8>] (console_unlock+0x5a8/0x6a8)
[<c01967d8>] (console_unlock) from [<c01981d0>] (vprintk_emit+0x118/0x2d8)
[<c01981d0>] (vprintk_emit) from [<c01983b0>] (vprintk_default+0x20/0x28)
[<c01983b0>] (vprintk_default) from [<c01989b4>] (printk+0x30/0x54)
[<c01989b4>] (printk) from [<c07500b8>] (s5p_mfc_init_decode_v6+0x1d4/0x284)
[<c07500b8>] (s5p_mfc_init_decode_v6) from [<c07230d0>] (vb2_start_streaming+0x24/0x150)
[<c07230d0>] (vb2_start_streaming) from [<c0724e4c>] (vb2_core_streamon+0x11c/0x15c)
[<c0724e4c>] (vb2_core_streamon) from [<c07478b8>] (vidioc_streamon+0x64/0xa0)
[<c07478b8>] (vidioc_streamon) from [<c0709640>] (__video_do_ioctl+0x28c/0x45c)
[<c0709640>] (__video_do_ioctl) from [<c0709bc8>] (video_usercopy+0x260/0x8a4)
[<c0709bc8>] (video_usercopy) from [<c02b3820>] (do_vfs_ioctl+0xb0/0x9fc)
[<c02b3820>] (do_vfs_ioctl) from [<c02b41a0>] (ksys_ioctl+0x34/0x58)
[<c02b41a0>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xe73ddfa8 to 0xe73ddff0)
...
---[ end trace 376cf5ba6e0bee93 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 4e936b95018a..481088a83212 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -523,7 +523,8 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
 				dev);
 		ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
 				dev);
-		ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
+		if (FW_HAS_E_MIN_SCRATCH_BUF(dev))
+			ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
 						get_min_scratch_buf_size, dev);
 		if (ctx->img_width == 0 || ctx->img_height == 0)
 			ctx->state = MFCINST_ERROR;
-- 
2.20.1

[PATCH AUTOSEL 5.2 096/249] media: s5p-mfc: fix reading min scratch buffer size on MFC v6/v7

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit be22203aec440c1761ce8542c2636ac6c8951e3a ]

MFC v6 and v7 has no register to read min scratch buffer size, so it has
to be read conditionally only if hardware supports it. This fixes following
NULL pointer exception on SoCs with MFC v6/v7:

8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = f25837f9
[00000000] *pgd=bd93d835
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
Modules linked in: btmrvl_sdio btmrvl bluetooth mwifiex_sdio mwifiex ecdh_generic ecc
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
PC is at s5p_mfc_get_min_scratch_buf_size+0x30/0x3c
LR is at s5p_mfc_get_min_scratch_buf_size+0x28/0x3c
...
[<c074f998>] (s5p_mfc_get_min_scratch_buf_size) from [<c0745bc0>] (s5p_mfc_irq+0x814/0xa5c)
[<c0745bc0>] (s5p_mfc_irq) from [<c019a218>] (__handle_irq_event_percpu+0x64/0x3f8)
[<c019a218>] (__handle_irq_event_percpu) from [<c019a5d8>] (handle_irq_event_percpu+0x2c/0x7c)
[<c019a5d8>] (handle_irq_event_percpu) from [<c019a660>] (handle_irq_event+0x38/0x5c)
[<c019a660>] (handle_irq_event) from [<c019ebc4>] (handle_fasteoi_irq+0xc4/0x180)
[<c019ebc4>] (handle_fasteoi_irq) from [<c0199270>] (generic_handle_irq+0x24/0x34)
[<c0199270>] (generic_handle_irq) from [<c0199888>] (__handle_domain_irq+0x7c/0xec)
[<c0199888>] (__handle_domain_irq) from [<c04ac298>] (gic_handle_irq+0x58/0x9c)
[<c04ac298>] (gic_handle_irq) from [<c0101ab0>] (__irq_svc+0x70/0xb0)
Exception stack(0xe73ddc60 to 0xe73ddca8)
...
[<c0101ab0>] (__irq_svc) from [<c01967d8>] (console_unlock+0x5a8/0x6a8)
[<c01967d8>] (console_unlock) from [<c01981d0>] (vprintk_emit+0x118/0x2d8)
[<c01981d0>] (vprintk_emit) from [<c01983b0>] (vprintk_default+0x20/0x28)
[<c01983b0>] (vprintk_default) from [<c01989b4>] (printk+0x30/0x54)
[<c01989b4>] (printk) from [<c07500b8>] (s5p_mfc_init_decode_v6+0x1d4/0x284)
[<c07500b8>] (s5p_mfc_init_decode_v6) from [<c07230d0>] (vb2_start_streaming+0x24/0x150)
[<c07230d0>] (vb2_start_streaming) from [<c0724e4c>] (vb2_core_streamon+0x11c/0x15c)
[<c0724e4c>] (vb2_core_streamon) from [<c07478b8>] (vidioc_streamon+0x64/0xa0)
[<c07478b8>] (vidioc_streamon) from [<c0709640>] (__video_do_ioctl+0x28c/0x45c)
[<c0709640>] (__video_do_ioctl) from [<c0709bc8>] (video_usercopy+0x260/0x8a4)
[<c0709bc8>] (video_usercopy) from [<c02b3820>] (do_vfs_ioctl+0xb0/0x9fc)
[<c02b3820>] (do_vfs_ioctl) from [<c02b41a0>] (ksys_ioctl+0x34/0x58)
[<c02b41a0>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xe73ddfa8 to 0xe73ddff0)
...
---[ end trace 376cf5ba6e0bee93 ]---

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c
index 4e936b95018a..481088a83212 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -523,7 +523,8 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
 				dev);
 		ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
 				dev);
-		ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
+		if (FW_HAS_E_MIN_SCRATCH_BUF(dev))
+			ctx->scratch_buf_size = s5p_mfc_hw_call(dev->mfc_ops,
 						get_min_scratch_buf_size, dev);
 		if (ctx->img_width == 0 || ctx->img_height == 0)
 			ctx->state = MFCINST_ERROR;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.2 097/249] selinux: fix empty write to keycreate file

[Sasha Levin]

From: Ondrej Mosnacek <omosnace@redhat.com>

[ Upstream commit 464c258aa45b09f16aa0f05847ed8895873262d9 ]

When sid == 0 (we are resetting keycreate_sid to the default value), we
should skip the KEY__CREATE check.

Before this patch, doing a zero-sized write to /proc/self/keycreate
would check if the current task can create unlabeled keys (which would
usually fail with -EACCESS and generate an AVC). Now it skips the check
and correctly sets the task's keycreate_sid to 0.

Bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1719067

Tested using the reproducer from the report above.

Fixes: 4eb582cf1fbd ("[PATCH] keys: add a way to store the appropriate context for newly-created keys")
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/hooks.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 94de51628fdc..3ec7ac70c313 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -6351,11 +6351,12 @@ static int selinux_setprocattr(const char *name, void *value, size_t size)
 	} else if (!strcmp(name, "fscreate")) {
 		tsec->create_sid = sid;
 	} else if (!strcmp(name, "keycreate")) {
-		error = avc_has_perm(&selinux_state,
-				     mysid, sid, SECCLASS_KEY, KEY__CREATE,
-				     NULL);
-		if (error)
-			goto abort_change;
+		if (sid) {
+			error = avc_has_perm(&selinux_state, mysid, sid,
+					     SECCLASS_KEY, KEY__CREATE, NULL);
+			if (error)
+				goto abort_change;
+		}
 		tsec->keycreate_sid = sid;
 	} else if (!strcmp(name, "sockcreate")) {
 		tsec->sockcreate_sid = sid;
-- 
2.20.1

[PATCH AUTOSEL 5.2 098/249] crypto: testmgr - add some more preemption points

[Sasha Levin]

From: Eric Biggers <ebiggers@google.com>

[ Upstream commit e63e1b0dd0003dc31f73d875907432be3a2abe5d ]

Call cond_resched() after each fuzz test iteration.  This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.

While we're at it, also call cond_resched() after finishing testing each
test vector.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/testmgr.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index 658a7eeebab2..292d28caf00f 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1279,6 +1279,7 @@ static int test_hash_vec(const char *driver, const struct hash_testvec *vec,
 						req, tsgl, hashstate);
 			if (err)
 				return err;
+			cond_resched();
 		}
 	}
 #endif
@@ -1493,6 +1494,7 @@ static int __alg_test_hash(const struct hash_testvec *vecs,
 		err = test_hash_vec(driver, &vecs[i], i, req, tsgl, hashstate);
 		if (err)
 			goto out;
+		cond_resched();
 	}
 	err = test_hash_vs_generic_impl(driver, generic_driver, maxkeysize, req,
 					tsgl, hashstate);
@@ -1755,6 +1757,7 @@ static int test_aead_vec(const char *driver, int enc,
 						&cfg, req, tsgls);
 			if (err)
 				return err;
+			cond_resched();
 		}
 	}
 #endif
@@ -1994,6 +1997,7 @@ static int test_aead(const char *driver, int enc,
 				    tsgls);
 		if (err)
 			return err;
+		cond_resched();
 	}
 	return 0;
 }
@@ -2336,6 +2340,7 @@ static int test_skcipher_vec(const char *driver, int enc,
 						    &cfg, req, tsgls);
 			if (err)
 				return err;
+			cond_resched();
 		}
 	}
 #endif
@@ -2535,6 +2540,7 @@ static int test_skcipher(const char *driver, int enc,
 					tsgls);
 		if (err)
 			return err;
+		cond_resched();
 	}
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 099/249] x86/cpu: Add Ice Lake NNPI to Intel family

[Sasha Levin]

From: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>

[ Upstream commit e32d045cd4ba06b59878323e434bad010e78e658 ]

Add the CPUID model number of Ice Lake Neural Network Processor for Deep
Learning Inference (ICL-NNPI) to the Intel family list. Ice Lake NNPI uses
model number 0x9D and this will be documented in a future version of Intel
Software Development Manual.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190606012419.13250-1-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/intel-family.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index 310118805f57..f60ddd655c78 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -56,6 +56,7 @@
 #define INTEL_FAM6_ICELAKE_XEON_D	0x6C
 #define INTEL_FAM6_ICELAKE_DESKTOP	0x7D
 #define INTEL_FAM6_ICELAKE_MOBILE	0x7E
+#define INTEL_FAM6_ICELAKE_NNPI		0x9D
 
 /* "Small Core" Processors (Atom) */
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 100/249] ASoC: meson: axg-tdm: fix sample clock inversion

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit cb36ff785e868992e96e8b9e5a0c2822b680a9e2 ]

The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield,
so the test to check if the format is i2s is wrong. Because of this the
clock setting may be wrong. For example, the sample clock gets inverted
in DSP B mode, when it should not.

Fix the lrclk invert helper function

Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/meson/axg-tdm.h b/sound/soc/meson/axg-tdm.h
index e578b6f40a07..5774ce0916d4 100644
--- a/sound/soc/meson/axg-tdm.h
+++ b/sound/soc/meson/axg-tdm.h
@@ -40,7 +40,7 @@ struct axg_tdm_iface {
 
 static inline bool axg_tdm_lrclk_invert(unsigned int fmt)
 {
-	return (fmt & SND_SOC_DAIFMT_I2S) ^
+	return ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) ^
 		!!(fmt & (SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_NB_IF));
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 100/249] ASoC: meson: axg-tdm: fix sample clock inversion

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit cb36ff785e868992e96e8b9e5a0c2822b680a9e2 ]

The content of SND_SOC_DAIFMT_FORMAT_MASK is a number, not a bitfield,
so the test to check if the format is i2s is wrong. Because of this the
clock setting may be wrong. For example, the sample clock gets inverted
in DSP B mode, when it should not.

Fix the lrclk invert helper function

Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-tdm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/meson/axg-tdm.h b/sound/soc/meson/axg-tdm.h
index e578b6f40a07..5774ce0916d4 100644
--- a/sound/soc/meson/axg-tdm.h
+++ b/sound/soc/meson/axg-tdm.h
@@ -40,7 +40,7 @@ struct axg_tdm_iface {
 
 static inline bool axg_tdm_lrclk_invert(unsigned int fmt)
 {
-	return (fmt & SND_SOC_DAIFMT_I2S) ^
+	return ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) ^
 		!!(fmt & (SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_NB_IF));
 }
 
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 5.2 101/249] rcu: Force inlining of rcu_read_lock()

[Sasha Levin]

From: Waiman Long <longman@redhat.com>

[ Upstream commit 6da9f775175e516fc7229ceaa9b54f8f56aa7924 ]

When debugging options are turned on, the rcu_read_lock() function
might not be inlined. This results in lockdep's print_lock() function
printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller.
For example:

[   10.579995] =============================
[   10.584033] WARNING: suspicious RCU usage
[   10.588074] 4.18.0.memcg_v2+ #1 Not tainted
[   10.593162] -----------------------------
[   10.597203] include/linux/rcupdate.h:281 Illegal context switch in
RCU read-side critical section!
[   10.606220]
[   10.606220] other info that might help us debug this:
[   10.606220]
[   10.614280]
[   10.614280] rcu_scheduler_active = 2, debug_locks = 1
[   10.620853] 3 locks held by systemd/1:
[   10.624632]  #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70
[   10.633232]  #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70
[   10.640954]  #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70

These "rcu_read_lock+0x0/0x70" strings are not providing any useful
information.  This commit therefore forces inlining of the rcu_read_lock()
function so that rcu_read_lock()'s caller is instead shown.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/rcupdate.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index b25d20822e75..3508f4508a11 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -586,7 +586,7 @@ static inline void rcu_preempt_sleep_check(void) { }
  * read-side critical sections may be preempted and they may also block, but
  * only when acquiring spinlocks that are subject to priority inheritance.
  */
-static inline void rcu_read_lock(void)
+static __always_inline void rcu_read_lock(void)
 {
 	__rcu_read_lock();
 	__acquire(RCU);
-- 
2.20.1

[PATCH AUTOSEL 5.2 102/249] perf/x86: Add Intel Ice Lake NNPI uncore support

[Sasha Levin]

From: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>

[ Upstream commit 5f4318c1b1d23a9290e4def78ee76017c288bf60 ]

Intel Ice Lake uncore support already included IMC PCI ID but ICL-NNPI
CPUID is missing so add it to fix the probe function.

Fixes: e39875d15ad6 ("perf/x86: add Intel Icelake uncore support")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: alexander.shishkin@linux.intel.com
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linux PM <linux-pm@vger.kernel.org>
Link: https://lkml.kernel.org/r/20190614081701.13828-1-rajneesh.bhardwaj@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 9e3fbd47cb56..089bfcdf2f7f 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1400,6 +1400,7 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_MOBILE, skl_uncore_init),
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_DESKTOP, skl_uncore_init),
 	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_MOBILE, icl_uncore_init),
+	X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_NNPI, icl_uncore_init),
 	{},
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 103/249] x86/cpufeatures: Add FDP_EXCPTN_ONLY and ZERO_FCS_FDS

[Sasha Levin]

From: Aaron Lewis <aaronlewis@google.com>

[ Upstream commit cbb99c0f588737ec98c333558922ce47e9a95827 ]

Add the CPUID enumeration for Intel's de-feature bits to accommodate
passing these de-features through to kvm guests.

These de-features are (from SDM vol 1, section 8.1.8):
 - X86_FEATURE_FDP_EXCPTN_ONLY: If CPUID.(EAX=07H,ECX=0H):EBX[bit 6] = 1, the
   data pointer (FDP) is updated only for the x87 non-control instructions that
   incur unmasked x87 exceptions.
 - X86_FEATURE_ZERO_FCS_FDS: If CPUID.(EAX=07H,ECX=0H):EBX[bit 13] = 1, the
   processor deprecates FCS and FDS; it saves each as 0000H.

Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: marcorr@google.com
Cc: Peter Feiner <pfeiner@google.com>
Cc: pshier@google.com
Cc: Robert Hoo <robert.hu@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190605220252.103406-1-aaronlewis@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/cpufeatures.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 75f27ee2c263..1017b9c7dfe0 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -239,12 +239,14 @@
 #define X86_FEATURE_BMI1		( 9*32+ 3) /* 1st group bit manipulation extensions */
 #define X86_FEATURE_HLE			( 9*32+ 4) /* Hardware Lock Elision */
 #define X86_FEATURE_AVX2		( 9*32+ 5) /* AVX2 instructions */
+#define X86_FEATURE_FDP_EXCPTN_ONLY	( 9*32+ 6) /* "" FPU data pointer updated only on x87 exceptions */
 #define X86_FEATURE_SMEP		( 9*32+ 7) /* Supervisor Mode Execution Protection */
 #define X86_FEATURE_BMI2		( 9*32+ 8) /* 2nd group bit manipulation extensions */
 #define X86_FEATURE_ERMS		( 9*32+ 9) /* Enhanced REP MOVSB/STOSB instructions */
 #define X86_FEATURE_INVPCID		( 9*32+10) /* Invalidate Processor Context ID */
 #define X86_FEATURE_RTM			( 9*32+11) /* Restricted Transactional Memory */
 #define X86_FEATURE_CQM			( 9*32+12) /* Cache QoS Monitoring */
+#define X86_FEATURE_ZERO_FCS_FDS	( 9*32+13) /* "" Zero out FPU CS and FPU DS */
 #define X86_FEATURE_MPX			( 9*32+14) /* Memory Protection Extension */
 #define X86_FEATURE_RDT_A		( 9*32+15) /* Resource Director Technology Allocation */
 #define X86_FEATURE_AVX512F		( 9*32+16) /* AVX-512 Foundation */
-- 
2.20.1

[PATCH AUTOSEL 5.2 104/249] qed: iWARP - Fix tc for MPA ll2 connection

[Sasha Levin]

From: Michal Kalderon <michal.kalderon@marvell.com>

[ Upstream commit cb94d52b93c74fe1f2595734fabeda9f8ae891ee ]

The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.

Fixes: ae3488ff37dc ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index ded556b7bab5..eeea8683d99b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2708,6 +2708,8 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
 	data.input.rx_num_desc = n_ooo_bufs * 2;
 	data.input.tx_num_desc = data.input.rx_num_desc;
 	data.input.tx_max_bds_per_packet = QED_IWARP_MAX_BDS_PER_FPDU;
+	data.input.tx_tc = PKT_LB_TC;
+	data.input.tx_dest = QED_LL2_TX_DEST_LB;
 	data.p_connection_handle = &iwarp_info->ll2_mpa_handle;
 	data.input.secondary_queue = true;
 	data.cbs = &cbs;
-- 
2.20.1

[PATCH AUTOSEL 5.2 105/249] net: hns3: fix for dereferencing before null checking

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 757188005f905664b0186b88cf26a7e844190a63 ]

The netdev is dereferenced before null checking in the function
hns3_setup_tc.

This patch moves the dereferencing after the null checking.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 5611b990ac34..d18ad7b48a31 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1514,12 +1514,12 @@ static void hns3_nic_get_stats64(struct net_device *netdev,
 static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 {
 	struct tc_mqprio_qopt_offload *mqprio_qopt = type_data;
-	struct hnae3_handle *h = hns3_get_handle(netdev);
-	struct hnae3_knic_private_info *kinfo = &h->kinfo;
 	u8 *prio_tc = mqprio_qopt->qopt.prio_tc_map;
+	struct hnae3_knic_private_info *kinfo;
 	u8 tc = mqprio_qopt->qopt.num_tc;
 	u16 mode = mqprio_qopt->mode;
 	u8 hw = mqprio_qopt->qopt.hw;
+	struct hnae3_handle *h;
 
 	if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
 	       mode == TC_MQPRIO_MODE_CHANNEL) || (!hw && tc == 0)))
@@ -1531,6 +1531,9 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
 	if (!netdev)
 		return -EINVAL;
 
+	h = hns3_get_handle(netdev);
+	kinfo = &h->kinfo;
+
 	return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
 		kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 106/249] net: hns3: fix for skb leak when doing selftest

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 8f9eed1a8791b83eb1c54c261d68424717e4111e ]

If hns3_nic_net_xmit does not return NETDEV_TX_BUSY when doing
a loopback selftest, the skb is not freed in hns3_clean_tx_ring
or hns3_nic_net_xmit, which causes skb not freed problem.

This patch fixes it by freeing skb when hns3_nic_net_xmit does
not return NETDEV_TX_OK.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index d1588ea6132c..24fce343e7fc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -243,11 +243,13 @@ static int hns3_lp_run_test(struct net_device *ndev, enum hnae3_loop mode)
 
 		skb_get(skb);
 		tx_ret = hns3_nic_net_xmit(skb, ndev);
-		if (tx_ret == NETDEV_TX_OK)
+		if (tx_ret == NETDEV_TX_OK) {
 			good_cnt++;
-		else
+		} else {
+			kfree_skb(skb);
 			netdev_err(ndev, "hns3_lb_run_test xmit failed: %d\n",
 				   tx_ret);
+		}
 	}
 	if (good_cnt != HNS3_NIC_LB_TEST_PKT_NUM) {
 		ret_val = HNS3_NIC_LB_TEST_TX_CNT_ERR;
-- 
2.20.1

[PATCH AUTOSEL 5.2 107/249] net: hns3: delay ring buffer clearing during reset

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 3a30964a2eef6aabd3ab18b979ea0eacf1147731 ]

The driver may not be able to disable the ring through firmware
when downing the netdev during reset process, which may cause
hardware accessing freed buffer problem.

This patch delays the ring buffer clearing to reset uninit
process because hardware will not access the ring buffer after
hardware reset is completed.

Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index d18ad7b48a31..e0d3e2f9801d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -28,7 +28,7 @@
 #define hns3_tx_bd_count(S)	DIV_ROUND_UP(S, HNS3_MAX_BD_SIZE)
 
 static void hns3_clear_all_ring(struct hnae3_handle *h);
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h);
+static void hns3_force_clear_all_ring(struct hnae3_handle *h);
 static void hns3_remove_hw_addr(struct net_device *netdev);
 
 static const char hns3_driver_name[] = "hns3";
@@ -491,7 +491,12 @@ static void hns3_nic_net_down(struct net_device *netdev)
 	/* free irq resources */
 	hns3_nic_uninit_irq(priv);
 
-	hns3_clear_all_ring(priv->ae_handle);
+	/* delay ring buffer clearing to hns3_reset_notify_uninit_enet
+	 * during reset process, because driver may not be able
+	 * to disable the ring through firmware when downing the netdev.
+	 */
+	if (!hns3_nic_resetting(netdev))
+		hns3_clear_all_ring(priv->ae_handle);
 }
 
 static int hns3_nic_net_stop(struct net_device *netdev)
@@ -3883,7 +3888,7 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
 
 	hns3_del_all_fd_rules(netdev, true);
 
-	hns3_force_clear_all_rx_ring(handle);
+	hns3_force_clear_all_ring(handle);
 
 	hns3_uninit_phy(netdev);
 
@@ -4055,7 +4060,7 @@ static void hns3_force_clear_rx_ring(struct hns3_enet_ring *ring)
 	}
 }
 
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
+static void hns3_force_clear_all_ring(struct hnae3_handle *h)
 {
 	struct net_device *ndev = h->kinfo.netdev;
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
@@ -4063,6 +4068,9 @@ static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
 	u32 i;
 
 	for (i = 0; i < h->kinfo.num_tqps; i++) {
+		ring = priv->ring_data[i].ring;
+		hns3_clear_tx_ring(ring);
+
 		ring = priv->ring_data[i + h->kinfo.num_tqps].ring;
 		hns3_force_clear_rx_ring(ring);
 	}
@@ -4297,7 +4305,8 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
 		return 0;
 	}
 
-	hns3_force_clear_all_rx_ring(handle);
+	hns3_clear_all_ring(handle);
+	hns3_force_clear_all_ring(handle);
 
 	hns3_nic_uninit_vector_data(priv);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 108/249] block: null_blk: fix race condition for null_del_dev

[Sasha Levin]

From: Bob Liu <bob.liu@oracle.com>

[ Upstream commit 7602843fd873cae43a444b83b14dfdd114a9659c ]

Dulicate call of null_del_dev() will trigger null pointer error like below.
The reason is a race condition between nullb_device_power_store() and
nullb_group_drop_item().

  CPU#0                         CPU#1
  ----------------              -----------------
  do_rmdir()
   >configfs_rmdir()
    >client_drop_item()
     >nullb_group_drop_item()
                                nullb_device_power_store()
				>null_del_dev()

      >test_and_clear_bit(NULLB_DEV_FL_UP
       >null_del_dev()
       ^^^^^
       Duplicated null_dev_dev() triger null pointer error

				>clear_bit(NULLB_DEV_FL_UP

The fix could be keep the sequnce of clear NULLB_DEV_FL_UP and null_del_dev().

[  698.613600] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[  698.613608] #PF error: [normal kernel read fault]
[  698.613611] PGD 0 P4D 0
[  698.613619] Oops: 0000 [#1] SMP PTI
[  698.613627] CPU: 3 PID: 6382 Comm: rmdir Not tainted 5.0.0+ #35
[  698.613631] Hardware name: LENOVO 20LJS2EV08/20LJS2EV08, BIOS R0SET33W (1.17 ) 07/18/2018
[  698.613644] RIP: 0010:null_del_dev+0xc/0x110 [null_blk]
[  698.613649] Code: 00 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b eb 97 e8 47 bb 2a e8 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <8b> 77 18 48 89 fb 4c 8b 27 48 c7 c7 40 57 1e c1 e8 bf c7 cb e8 48
[  698.613654] RSP: 0018:ffffb887888bfde0 EFLAGS: 00010286
[  698.613659] RAX: 0000000000000000 RBX: ffff9d436d92bc00 RCX: ffff9d43a9184681
[  698.613663] RDX: ffffffffc11e5c30 RSI: 0000000068be6540 RDI: 0000000000000000
[  698.613667] RBP: ffffb887888bfdf0 R08: 0000000000000001 R09: 0000000000000000
[  698.613671] R10: ffffb887888bfdd8 R11: 0000000000000f16 R12: ffff9d436d92bc08
[  698.613675] R13: ffff9d436d94e630 R14: ffffffffc11e5088 R15: ffffffffc11e5000
[  698.613680] FS:  00007faa68be6540(0000) GS:ffff9d43d14c0000(0000) knlGS:0000000000000000
[  698.613685] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  698.613689] CR2: 0000000000000018 CR3: 000000042f70c002 CR4: 00000000003606e0
[  698.613693] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  698.613697] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  698.613700] Call Trace:
[  698.613712]  nullb_group_drop_item+0x50/0x70 [null_blk]
[  698.613722]  client_drop_item+0x29/0x40
[  698.613728]  configfs_rmdir+0x1ed/0x300
[  698.613738]  vfs_rmdir+0xb2/0x130
[  698.613743]  do_rmdir+0x1c7/0x1e0
[  698.613750]  __x64_sys_rmdir+0x17/0x20
[  698.613759]  do_syscall_64+0x5a/0x110
[  698.613768]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/block/null_blk_main.c b/drivers/block/null_blk_main.c
index 447d635c79a2..2a4f8bc4f930 100644
--- a/drivers/block/null_blk_main.c
+++ b/drivers/block/null_blk_main.c
@@ -327,11 +327,12 @@ static ssize_t nullb_device_power_store(struct config_item *item,
 		set_bit(NULLB_DEV_FL_CONFIGURED, &dev->flags);
 		dev->power = newp;
 	} else if (dev->power && !newp) {
-		mutex_lock(&lock);
-		dev->power = newp;
-		null_del_dev(dev->nullb);
-		mutex_unlock(&lock);
-		clear_bit(NULLB_DEV_FL_UP, &dev->flags);
+		if (test_and_clear_bit(NULLB_DEV_FL_UP, &dev->flags)) {
+			mutex_lock(&lock);
+			dev->power = newp;
+			null_del_dev(dev->nullb);
+			mutex_unlock(&lock);
+		}
 		clear_bit(NULLB_DEV_FL_CONFIGURED, &dev->flags);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 109/249] blkcg, writeback: dead memcgs shouldn't contribute to writeback ownership arbitration

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit 6631142229005e1b1c311a09efe9fb3cfdac8559 ]

wbc_account_io() collects information on cgroup ownership of writeback
pages to determine which cgroup should own the inode.  Pages can stay
associated with dead memcgs but we want to avoid attributing IOs to
dead blkcgs as much as possible as the association is likely to be
stale.  However, currently, pages associated with dead memcgs
contribute to the accounting delaying and/or confusing the
arbitration.

Fix it by ignoring pages associated with dead memcgs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fs-writeback.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index e41cbe8e81b9..9ebfb1b28430 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -715,6 +715,7 @@ void wbc_detach_inode(struct writeback_control *wbc)
 void wbc_account_io(struct writeback_control *wbc, struct page *page,
 		    size_t bytes)
 {
+	struct cgroup_subsys_state *css;
 	int id;
 
 	/*
@@ -726,7 +727,12 @@ void wbc_account_io(struct writeback_control *wbc, struct page *page,
 	if (!wbc->wb)
 		return;
 
-	id = mem_cgroup_css_from_page(page)->id;
+	css = mem_cgroup_css_from_page(page);
+	/* dead cgroups shouldn't contribute to inode ownership arbitration */
+	if (!(css->flags & CSS_ONLINE))
+		return;
+
+	id = css->id;
 
 	if (id == wbc->wb_id) {
 		wbc->wb_bytes += bytes;
-- 
2.20.1

[PATCH AUTOSEL 5.2 110/249] xfrm: fix sa selector validation

[Sasha Levin]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit b8d6d0079757cbd1b69724cfd1c08e2171c68cee ]

After commit b38ff4075a80, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
  mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
  'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4

In fact, the selector is not mandatory, allow the user to provide an empty
selector.

Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 76ad7e201626..b88ba45ff1ac 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -167,6 +167,9 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 	}
 
 	switch (p->sel.family) {
+	case AF_UNSPEC:
+		break;
+
 	case AF_INET:
 		if (p->sel.prefixlen_d > 32 || p->sel.prefixlen_s > 32)
 			goto out;
-- 
2.20.1

[PATCH AUTOSEL 5.2 111/249] sched/core: Add __sched tag for io_schedule()

[Sasha Levin]

From: Gao Xiang <gaoxiang25@huawei.com>

[ Upstream commit e3b929b0a184edb35531153c5afcaebb09014f9d ]

Non-inline io_schedule() was introduced in:

  commit 10ab56434f2f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")

Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will
report io_schedule() rather than its callers when waiting for IO.

Reported-by: Jilong Kou <koujilong@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miao Xie <miaoxie@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 10ab56434f2f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()")
Link: https://lkml.kernel.org/r/20190603091338.2695-1-gaoxiang25@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 874c427742a9..4d5962232a55 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -5123,7 +5123,7 @@ long __sched io_schedule_timeout(long timeout)
 }
 EXPORT_SYMBOL(io_schedule_timeout);
 
-void io_schedule(void)
+void __sched io_schedule(void)
 {
 	int token;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 112/249] perf/x86/intel: Add more Icelake CPUIDs

[Sasha Levin]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit faaeff98666c24376cebd0b106504d05a36881d1 ]

Add new model number for Icelake desktop and server to perf.

The data source encoding for Icelake server is the same as Skylake
server.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: qiuxu.zhuo@intel.com
Cc: rui.zhang@intel.com
Cc: tony.luck@intel.com
Link: https://lkml.kernel.org/r/20190603134122.13853-2-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index a5436cee20b1..b6cae65aa7ef 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -4439,6 +4439,7 @@ __init int intel_pmu_init(void)
 	struct event_constraint *c;
 	unsigned int unused;
 	struct extra_reg *er;
+	bool pmem = false;
 	int version, i;
 	char *name;
 
@@ -4890,9 +4891,10 @@ __init int intel_pmu_init(void)
 		name = "knights-landing";
 		break;
 
+	case INTEL_FAM6_SKYLAKE_X:
+		pmem = true;
 	case INTEL_FAM6_SKYLAKE_MOBILE:
 	case INTEL_FAM6_SKYLAKE_DESKTOP:
-	case INTEL_FAM6_SKYLAKE_X:
 	case INTEL_FAM6_KABYLAKE_MOBILE:
 	case INTEL_FAM6_KABYLAKE_DESKTOP:
 		x86_add_quirk(intel_pebs_isolation_quirk);
@@ -4925,8 +4927,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.cpu_events = hsw_events_attrs;
 		mem_attr = hsw_mem_events_attrs;
 		tsx_attr = hsw_tsx_events_attrs;
-		intel_pmu_pebs_data_source_skl(
-			boot_cpu_data.x86_model == INTEL_FAM6_SKYLAKE_X);
+		intel_pmu_pebs_data_source_skl(pmem);
 
 		if (boot_cpu_has(X86_FEATURE_TSX_FORCE_ABORT)) {
 			x86_pmu.flags |= PMU_FL_TFA;
@@ -4940,7 +4941,11 @@ __init int intel_pmu_init(void)
 		name = "skylake";
 		break;
 
+	case INTEL_FAM6_ICELAKE_X:
+	case INTEL_FAM6_ICELAKE_XEON_D:
+		pmem = true;
 	case INTEL_FAM6_ICELAKE_MOBILE:
+	case INTEL_FAM6_ICELAKE_DESKTOP:
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
@@ -4963,7 +4968,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.cpu_events = get_icl_events_attrs();
 		x86_pmu.rtm_abort_event = X86_CONFIG(.event=0xca, .umask=0x02);
 		x86_pmu.lbr_pt_coexist = true;
-		intel_pmu_pebs_data_source_skl(false);
+		intel_pmu_pebs_data_source_skl(pmem);
 		pr_cont("Icelake events, ");
 		name = "icelake";
 		break;
-- 
2.20.1

[PATCH AUTOSEL 5.2 113/249] sched/fair: Fix "runnable_avg_yN_inv" not used warnings

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 509466b7d480bc5d22e90b9fbe6122ae0e2fbe39 ]

runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was
included in several other places because they need other macros all
came from kernel/sched/sched-pelt.h which was generated by
Documentation/scheduler/sched-pelt. As the result, it causes compilation
a lot of warnings,

  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=]
  ...

Silence it by appending the __maybe_unused attribute for it, so all
generated variables and macros can still be kept in the same file.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1559596304-31581-1-git-send-email-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/scheduler/sched-pelt.c | 3 ++-
 kernel/sched/sched-pelt.h            | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/scheduler/sched-pelt.c b/Documentation/scheduler/sched-pelt.c
index e4219139386a..7238b355919c 100644
--- a/Documentation/scheduler/sched-pelt.c
+++ b/Documentation/scheduler/sched-pelt.c
@@ -20,7 +20,8 @@ void calc_runnable_avg_yN_inv(void)
 	int i;
 	unsigned int x;
 
-	printf("static const u32 runnable_avg_yN_inv[] = {");
+	/* To silence -Wunused-but-set-variable warnings. */
+	printf("static const u32 runnable_avg_yN_inv[] __maybe_unused = {");
 	for (i = 0; i < HALFLIFE; i++) {
 		x = ((1UL<<32)-1)*pow(y, i);
 
diff --git a/kernel/sched/sched-pelt.h b/kernel/sched/sched-pelt.h
index a26473674fb7..c529706bed11 100644
--- a/kernel/sched/sched-pelt.h
+++ b/kernel/sched/sched-pelt.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /* Generated by Documentation/scheduler/sched-pelt; do not modify. */
 
-static const u32 runnable_avg_yN_inv[] = {
+static const u32 runnable_avg_yN_inv[] __maybe_unused = {
 	0xffffffff, 0xfa83b2da, 0xf5257d14, 0xefe4b99a, 0xeac0c6e6, 0xe5b906e6,
 	0xe0ccdeeb, 0xdbfbb796, 0xd744fcc9, 0xd2a81d91, 0xce248c14, 0xc9b9bd85,
 	0xc5672a10, 0xc12c4cc9, 0xbd08a39e, 0xb8fbaf46, 0xb504f333, 0xb123f581,
-- 
2.20.1

[PATCH AUTOSEL 5.2 114/249] perf/x86/intel: Disable check_msr for real HW

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit d0e1a507bdc761a14906f03399d933ea639a1756 ]

Tom Vaden reported false failure of the check_msr() function, because
some servers can do POST tracing and enable LBR tracing during
bootup.

Kan confirmed that check_msr patch was to fix a bug report in
guest, so it's ok to disable it for real HW.

Reported-by: Tom Vaden <tom.vaden@hpe.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tom Vaden <tom.vaden@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190616141313.GD2500@krava
[ Readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index b6cae65aa7ef..f0c14665893b 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -20,6 +20,7 @@
 #include <asm/intel-family.h>
 #include <asm/apic.h>
 #include <asm/cpu_device_id.h>
+#include <asm/hypervisor.h>
 
 #include "../perf_event.h"
 
@@ -4054,6 +4055,13 @@ static bool check_msr(unsigned long msr, u64 mask)
 {
 	u64 val_old, val_new, val_tmp;
 
+	/*
+	 * Disable the check for real HW, so we don't
+	 * mess with potentionaly enabled registers:
+	 */
+	if (hypervisor_is_type(X86_HYPER_NATIVE))
+		return true;
+
 	/*
 	 * Read the current value, change it and read it back to see if it
 	 * matches, this is needed to detect certain hardware emulators
-- 
2.20.1

[PATCH AUTOSEL 5.2 115/249] perf/x86/intel/uncore: Handle invalid event coding for free-running counter

[Sasha Levin]

From: Kan Liang <kan.liang@linux.intel.com>

[ Upstream commit 543ac280b3576c0009e8c0fcd4d6bfc9978d7bd0 ]

Counting with invalid event coding for free-running counter may cause
OOPs, e.g. uncore_iio_free_running_0/event=1/.

Current code only validate the event with free-running event format,
event=0xff,umask=0xXY. Non-free-running event format never be checked
for the PMU with free-running counters.

Add generic hw_config() to check and reject the invalid event coding
for free-running PMU.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: eranian@google.com
Fixes: 0f519f0352e3 ("perf/x86/intel/uncore: Support IIO free-running counters on SKX")
Link: https://lkml.kernel.org/r/1556672028-119221-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/uncore.h       | 10 ++++++++++
 arch/x86/events/intel/uncore_snbep.c |  1 +
 2 files changed, 11 insertions(+)

diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index 79eb2e21e4f0..28499e39679f 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -419,6 +419,16 @@ static inline bool is_freerunning_event(struct perf_event *event)
 	       (((cfg >> 8) & 0xff) >= UNCORE_FREERUNNING_UMASK_START);
 }
 
+/* Check and reject invalid config */
+static inline int uncore_freerunning_hw_config(struct intel_uncore_box *box,
+					       struct perf_event *event)
+{
+	if (is_freerunning_event(event))
+		return 0;
+
+	return -EINVAL;
+}
+
 static inline void uncore_disable_box(struct intel_uncore_box *box)
 {
 	if (box->pmu->type->ops->disable_box)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index b10e04387f38..8e4e8e423839 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3585,6 +3585,7 @@ static struct uncore_event_desc skx_uncore_iio_freerunning_events[] = {
 
 static struct intel_uncore_ops skx_uncore_iio_freerunning_ops = {
 	.read_counter		= uncore_msr_read_counter,
+	.hw_config		= uncore_freerunning_hw_config,
 };
 
 static struct attribute *skx_uncore_iio_freerunning_formats_attr[] = {
-- 
2.20.1

[PATCH AUTOSEL 5.2 116/249] integrity: Fix __integrity_init_keyring() section mismatch

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 8c655784e2cf59cb6140759b8b546d98261d1ad9 ]

With gcc-4.6.3:

    WARNING: vmlinux.o(.text.unlikely+0x24c64): Section mismatch in reference from the function __integrity_init_keyring() to the function .init.text:set_platform_trusted_keys()
    The function __integrity_init_keyring() references
    the function __init set_platform_trusted_keys().
    This is often because __integrity_init_keyring lacks a __init
    annotation or the annotation of set_platform_trusted_keys is wrong.

Indeed, if the compiler decides not to inline __integrity_init_keyring(),
a warning is issued.

Fix this by adding the missing __init annotation.

Fixes: 9dc92c45177ab70e ("integrity: Define a trusted platform keyring")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/digsig.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/security/integrity/digsig.c b/security/integrity/digsig.c
index 4582bc26770a..868ade3e8970 100644
--- a/security/integrity/digsig.c
+++ b/security/integrity/digsig.c
@@ -69,8 +69,9 @@ int integrity_digsig_verify(const unsigned int id, const char *sig, int siglen,
 	return -EOPNOTSUPP;
 }
 
-static int __integrity_init_keyring(const unsigned int id, key_perm_t perm,
-				    struct key_restriction *restriction)
+static int __init __integrity_init_keyring(const unsigned int id,
+					   key_perm_t perm,
+					   struct key_restriction *restriction)
 {
 	const struct cred *cred = current_cred();
 	int err = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 117/249] x86/atomic: Fix smp_mb__{before,after}_atomic()

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 69d927bba39517d0980462efc051875b7f4db185 ]

Recent probing at the Linux Kernel Memory Model uncovered a
'surprise'. Strongly ordered architectures where the atomic RmW
primitive implies full memory ordering and
smp_mb__{before,after}_atomic() are a simple barrier() (such as x86)
fail for:

	*x = 1;
	atomic_inc(u);
	smp_mb__after_atomic();
	r0 = *y;

Because, while the atomic_inc() implies memory order, it
(surprisingly) does not provide a compiler barrier. This then allows
the compiler to re-order like so:

	atomic_inc(u);
	*x = 1;
	smp_mb__after_atomic();
	r0 = *y;

Which the CPU is then allowed to re-order (under TSO rules) like:

	atomic_inc(u);
	r0 = *y;
	*x = 1;

And this very much was not intended. Therefore strengthen the atomic
RmW ops to include a compiler barrier.

NOTE: atomic_{or,and,xor} and the bitops already had the compiler
barrier.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/atomic_t.txt         | 3 +++
 arch/x86/include/asm/atomic.h      | 8 ++++----
 arch/x86/include/asm/atomic64_64.h | 8 ++++----
 arch/x86/include/asm/barrier.h     | 4 ++--
 4 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt
index dca3fb0554db..65bb09a29324 100644
--- a/Documentation/atomic_t.txt
+++ b/Documentation/atomic_t.txt
@@ -194,6 +194,9 @@ These helper barriers exist because architectures have varying implicit
 ordering on their SMP atomic primitives. For example our TSO architectures
 provide full ordered atomics and these barriers are no-ops.
 
+NOTE: when the atomic RmW ops are fully ordered, they should also imply a
+compiler barrier.
+
 Thus:
 
   atomic_fetch_add();
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index ea3d95275b43..115127c7ad28 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -54,7 +54,7 @@ static __always_inline void arch_atomic_add(int i, atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "addl %1,%0"
 		     : "+m" (v->counter)
-		     : "ir" (i));
+		     : "ir" (i) : "memory");
 }
 
 /**
@@ -68,7 +68,7 @@ static __always_inline void arch_atomic_sub(int i, atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "subl %1,%0"
 		     : "+m" (v->counter)
-		     : "ir" (i));
+		     : "ir" (i) : "memory");
 }
 
 /**
@@ -95,7 +95,7 @@ static __always_inline bool arch_atomic_sub_and_test(int i, atomic_t *v)
 static __always_inline void arch_atomic_inc(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "incl %0"
-		     : "+m" (v->counter));
+		     : "+m" (v->counter) :: "memory");
 }
 #define arch_atomic_inc arch_atomic_inc
 
@@ -108,7 +108,7 @@ static __always_inline void arch_atomic_inc(atomic_t *v)
 static __always_inline void arch_atomic_dec(atomic_t *v)
 {
 	asm volatile(LOCK_PREFIX "decl %0"
-		     : "+m" (v->counter));
+		     : "+m" (v->counter) :: "memory");
 }
 #define arch_atomic_dec arch_atomic_dec
 
diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h
index dadc20adba21..5e86c0d68ac1 100644
--- a/arch/x86/include/asm/atomic64_64.h
+++ b/arch/x86/include/asm/atomic64_64.h
@@ -45,7 +45,7 @@ static __always_inline void arch_atomic64_add(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "addq %1,%0"
 		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter) : "memory");
 }
 
 /**
@@ -59,7 +59,7 @@ static inline void arch_atomic64_sub(long i, atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "subq %1,%0"
 		     : "=m" (v->counter)
-		     : "er" (i), "m" (v->counter));
+		     : "er" (i), "m" (v->counter) : "memory");
 }
 
 /**
@@ -87,7 +87,7 @@ static __always_inline void arch_atomic64_inc(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "incq %0"
 		     : "=m" (v->counter)
-		     : "m" (v->counter));
+		     : "m" (v->counter) : "memory");
 }
 #define arch_atomic64_inc arch_atomic64_inc
 
@@ -101,7 +101,7 @@ static __always_inline void arch_atomic64_dec(atomic64_t *v)
 {
 	asm volatile(LOCK_PREFIX "decq %0"
 		     : "=m" (v->counter)
-		     : "m" (v->counter));
+		     : "m" (v->counter) : "memory");
 }
 #define arch_atomic64_dec arch_atomic64_dec
 
diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h
index 14de0432d288..84f848c2541a 100644
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -80,8 +80,8 @@ do {									\
 })
 
 /* Atomic operations are already serializing on x86 */
-#define __smp_mb__before_atomic()	barrier()
-#define __smp_mb__after_atomic()	barrier()
+#define __smp_mb__before_atomic()	do { } while (0)
+#define __smp_mb__after_atomic()	do { } while (0)
 
 #include <asm-generic/barrier.h>
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 118/249] perf evsel: Make perf_evsel__name() accept a NULL argument

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit fdbdd7e8580eac9bdafa532746c865644d125e34 ]

In which case it simply returns "unknown", like when it can't figure out
the evsel->name value.

This makes this code more robust and fixes a problem in 'perf trace'
where a NULL evsel was being passed to a routine that only used the
evsel for printing its name when a invalid syscall id was passed.

Reported-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/evsel.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 4a5947625c5c..2c46f9aa416c 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -589,6 +589,9 @@ const char *perf_evsel__name(struct perf_evsel *evsel)
 {
 	char bf[128];
 
+	if (!evsel)
+		goto out_unknown;
+
 	if (evsel->name)
 		return evsel->name;
 
@@ -628,7 +631,10 @@ const char *perf_evsel__name(struct perf_evsel *evsel)
 
 	evsel->name = strdup(bf);
 
-	return evsel->name ?: "unknown";
+	if (evsel->name)
+		return evsel->name;
+out_unknown:
+	return "unknown";
 }
 
 const char *perf_evsel__group_name(struct perf_evsel *evsel)
-- 
2.20.1

[PATCH AUTOSEL 5.2 119/249] vhost_net: disable zerocopy by default

[Sasha Levin]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]

Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.

It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.

[1] https://patchwork.kernel.org/patch/3787671/

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d57ebdd616d9..247e5585af5d 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -35,7 +35,7 @@
 
 #include "vhost.h"
 
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
 module_param(experimental_zcopytx, int, 0444);
 MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
 		                       " 1 -Enable; 0 - Disable");
-- 
2.20.1

[PATCH AUTOSEL 5.2 119/249] vhost_net: disable zerocopy by default

[Sasha Levin]

From: Jason Wang <jasowang@redhat.com>

[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]

Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.

It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.

[1] https://patchwork.kernel.org/patch/3787671/

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d57ebdd616d9..247e5585af5d 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -35,7 +35,7 @@
 
 #include "vhost.h"
 
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
 module_param(experimental_zcopytx, int, 0444);
 MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
 		                       " 1 -Enable; 0 - Disable");
-- 
2.20.1

[PATCH AUTOSEL 5.2 120/249] iavf: allow null RX descriptors

[Sasha Levin]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit efa14c3985828da3163f5372137cb64d992b0f79 ]

In some circumstances, the hardware can hand us a null receive
descriptor, with no data attached but otherwise valid. Unfortunately,
the driver was ill-equipped to handle such an event, and would stop
processing packets at that point.

To fix this, use the Descriptor Done bit instead of the size to
determine whether or not a descriptor is ready to be processed. Add some
checks to allow for unused buffers.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_txrx.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_txrx.c b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
index 06d1509d57f7..c97b9ecf026a 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_txrx.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_txrx.c
@@ -1236,6 +1236,9 @@ static void iavf_add_rx_frag(struct iavf_ring *rx_ring,
 	unsigned int truesize = SKB_DATA_ALIGN(size + iavf_rx_offset(rx_ring));
 #endif
 
+	if (!size)
+		return;
+
 	skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page,
 			rx_buffer->page_offset, size, truesize);
 
@@ -1260,6 +1263,9 @@ static struct iavf_rx_buffer *iavf_get_rx_buffer(struct iavf_ring *rx_ring,
 {
 	struct iavf_rx_buffer *rx_buffer;
 
+	if (!size)
+		return NULL;
+
 	rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean];
 	prefetchw(rx_buffer->page);
 
@@ -1299,6 +1305,8 @@ static struct sk_buff *iavf_construct_skb(struct iavf_ring *rx_ring,
 	unsigned int headlen;
 	struct sk_buff *skb;
 
+	if (!rx_buffer)
+		return NULL;
 	/* prefetch first cache line of first page */
 	prefetch(va);
 #if L1_CACHE_BYTES < 128
@@ -1363,6 +1371,8 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
 #endif
 	struct sk_buff *skb;
 
+	if (!rx_buffer)
+		return NULL;
 	/* prefetch first cache line of first page */
 	prefetch(va);
 #if L1_CACHE_BYTES < 128
@@ -1398,6 +1408,9 @@ static struct sk_buff *iavf_build_skb(struct iavf_ring *rx_ring,
 static void iavf_put_rx_buffer(struct iavf_ring *rx_ring,
 			       struct iavf_rx_buffer *rx_buffer)
 {
+	if (!rx_buffer)
+		return;
+
 	if (iavf_can_reuse_rx_page(rx_buffer)) {
 		/* hand second half of page back to the ring */
 		iavf_reuse_rx_page(rx_ring, rx_buffer);
@@ -1496,11 +1509,12 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
 		 * verified the descriptor has been written back.
 		 */
 		dma_rmb();
+#define IAVF_RXD_DD BIT(IAVF_RX_DESC_STATUS_DD_SHIFT)
+		if (!iavf_test_staterr(rx_desc, IAVF_RXD_DD))
+			break;
 
 		size = (qword & IAVF_RXD_QW1_LENGTH_PBUF_MASK) >>
 		       IAVF_RXD_QW1_LENGTH_PBUF_SHIFT;
-		if (!size)
-			break;
 
 		iavf_trace(clean_rx_irq, rx_ring, rx_desc, skb);
 		rx_buffer = iavf_get_rx_buffer(rx_ring, size);
@@ -1516,7 +1530,8 @@ static int iavf_clean_rx_irq(struct iavf_ring *rx_ring, int budget)
 		/* exit if we failed to retrieve a buffer */
 		if (!skb) {
 			rx_ring->rx_stats.alloc_buff_failed++;
-			rx_buffer->pagecnt_bias++;
+			if (rx_buffer)
+				rx_buffer->pagecnt_bias++;
 			break;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 121/249] ipoib: correcly show a VF hardware address

[Sasha Levin]

From: Denis Kirjanov <kda@linux-powerpc.org>

[ Upstream commit 64d701c608fea362881e823b666327f5d28d7ffd ]

in the case of IPoIB with SRIOV enabled hardware
ip link show command incorrecly prints
0 instead of a VF hardware address.

Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
    link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0     link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off

v1->v2: just copy an address without modifing ifla_vf_mac
v2->v3: update the changelog

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 9b5e11d3fb85..04ea7db08e87 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -1998,6 +1998,7 @@ static int ipoib_get_vf_config(struct net_device *dev, int vf,
 		return err;
 
 	ivf->vf = vf;
+	memcpy(ivf->mac, dev->dev_addr, dev->addr_len);
 
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 122/249] ASoC: rsnd: fixup mod ID calculation in rsnd_ctu_probe_

[Sasha Levin]

From: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>

[ Upstream commit ac28ec07ae1c5c1e18ed6855eb105a328418da88 ]

commit c16015f36cc1 ("ASoC: rsnd: add .get_id/.get_id_sub")
introduces rsnd_ctu_id which calcualates and gives
the main Device id of the CTU by dividing the id by 4.
rsnd_mod_id uses this interface to get the CTU main
Device id. But this commit forgets to revert the main
Device id calcution previously done in rsnd_ctu_probe_
which also divides the id by 4. This path corrects the
same to get the correct main Device id.

The issue is observered when rsnd_ctu_probe_ is done for CTU1

Fixes: c16015f36cc1 ("ASoC: rsnd: add .get_id/.get_id_sub")

Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ctu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ctu.c b/sound/soc/sh/rcar/ctu.c
index 8cb06dab234e..7647b3d4c0ba 100644
--- a/sound/soc/sh/rcar/ctu.c
+++ b/sound/soc/sh/rcar/ctu.c
@@ -108,7 +108,7 @@ static int rsnd_ctu_probe_(struct rsnd_mod *mod,
 			   struct rsnd_dai_stream *io,
 			   struct rsnd_priv *priv)
 {
-	return rsnd_cmd_attach(io, rsnd_mod_id(mod) / 4);
+	return rsnd_cmd_attach(io, rsnd_mod_id(mod));
 }
 
 static void rsnd_ctu_value_init(struct rsnd_dai_stream *io,
-- 
2.20.1

[PATCH AUTOSEL 5.2 123/249] tools build: Fix the zstd test in the test-all.c common case feature test

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 3469fa84c1631face938efc42b3f488a2c2504e0 ]

We were renanimg 'main' to 'main_zstd' but then using 'main_libzstd();'
in the main() for test-all.c, causing this:

  $ cat /tmp/build/perf/feature/test-all.make.output
  test-all.c: In function ‘main’:
  test-all.c:236:2: error: implicit declaration of function ‘main_test_libzstd’; did you mean ‘main_test_zstd’? [-Werror=implicit-function-declaration]
    main_test_libzstd();
    ^~~~~~~~~~~~~~~~~
    main_test_zstd
  cc1: all warnings being treated as errors
  $

I.e. what was supposed to be the fast path feature test was _always_
failing, duh, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Fixes: 3b1c5d965971 ("tools build: Implement libzstd feature check, LIBZSTD_DIR and NO_LIBZSTD defines")
Link: https://lkml.kernel.org/n/tip-ma4abk0utroiw4mwpmvnjlru@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/build/feature/test-all.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c
index a59c53705093..939ac2fcc783 100644
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -182,7 +182,7 @@
 # include "test-disassembler-four-args.c"
 #undef main
 
-#define main main_test_zstd
+#define main main_test_libzstd
 # include "test-libzstd.c"
 #undef main
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 124/249] bpf: fix callees pruning callers

[Sasha Levin]

From: Alexei Starovoitov <ast@kernel.org>

[ Upstream commit eea1c227b9e9bad295e8ef984004a9acf12bb68c ]

The commit 7640ead93924 partially resolved the issue of callees
incorrectly pruning the callers.
With introduction of bounded loops and jmps_processed heuristic
single verifier state may contain multiple branches and calls.
It's possible that new verifier state (for future pruning) will be
allocated inside callee. Then callee will exit (still within the same
verifier state). It will go back to the caller and there R6-R9 registers
will be read and will trigger mark_reg_read. But the reg->live for all frames
but the top frame is not set to LIVE_NONE. Hence mark_reg_read will fail
to propagate liveness into parent and future walking will incorrectly
conclude that the states are equivalent because LIVE_READ is not set.
In other words the rule for parent/live should be:
whenever register parentage chain is set the reg->live should be set to LIVE_NONE.
is_state_visited logic already follows this rule for spilled registers.

Fixes: 7640ead93924 ("bpf: verifier: make sure callees don't prune with caller differences")
Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index a5c369e60343..11528bdaa9dc 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -6456,17 +6456,18 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
 	 * the state of the call instruction (with WRITTEN set), and r0 comes
 	 * from callee with its full parentage chain, anyway.
 	 */
-	for (j = 0; j <= cur->curframe; j++)
-		for (i = j < cur->curframe ? BPF_REG_6 : 0; i < BPF_REG_FP; i++)
-			cur->frame[j]->regs[i].parent = &new->frame[j]->regs[i];
 	/* clear write marks in current state: the writes we did are not writes
 	 * our child did, so they don't screen off its reads from us.
 	 * (There are no read marks in current state, because reads always mark
 	 * their parent and current state never has children yet.  Only
 	 * explored_states can get read marks.)
 	 */
-	for (i = 0; i < BPF_REG_FP; i++)
-		cur->frame[cur->curframe]->regs[i].live = REG_LIVE_NONE;
+	for (j = 0; j <= cur->curframe; j++) {
+		for (i = j < cur->curframe ? BPF_REG_6 : 0; i < BPF_REG_FP; i++)
+			cur->frame[j]->regs[i].parent = &new->frame[j]->regs[i];
+		for (i = 0; i < BPF_REG_FP; i++)
+			cur->frame[j]->regs[i].live = REG_LIVE_NONE;
+	}
 
 	/* all stack frames are accessible from callee, clear them all */
 	for (j = 0; j <= cur->curframe; j++) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 125/249] perf build: Handle slang being in /usr/include and in /usr/include/slang/

[Sasha Levin]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 78d6ccce03e86de34c7000bcada493ed0679e350 ]

In some distros slang.h may be in a /usr/include 'slang' subdir, so use
the if slang is not explicitely disabled (by using NO_SLANG=1) and its
feature test for the common case (having /usr/include/slang.h) failed,
use the results for the test that checks if it is in slang/slang.h.

Change the only file in perf that includes slang.h to use
HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good.

On a rhel6 system now we have:

  $ /tmp/build/perf/perf -vv | grep slang
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
  $ ldd /tmp/build/perf/perf | grep libslang
  	libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000)
  $ grep slang /tmp/build/perf/FEATURE-DUMP
  feature-libslang=0
  feature-libslang-include-subdir=1
  $ cat /etc/redhat-release
  CentOS release 6.10 (Final)
  $

While on fedora:29:

  $ /tmp/build/perf/perf -vv | grep slang
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
  $ ldd /tmp/build/perf/perf | grep slang
  	libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000)
  $ grep slang /tmp/build/perf/FEATURE-DUMP
  feature-libslang=1
  feature-libslang-include-subdir=1
  $
  $ cat /etc/fedora-release
  Fedora release 29 (Twenty Nine)
  $

The feature-libslang-include-subdir=1 line is because the 'gettid()'
test was added to test-all.c as the new glibc has an implementation for
that, so we soon should have it not failing, i.e. should be the common
case soon. Perhaps I should move it out till it becomes the norm...

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang")
Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/Makefile.config | 11 ++++++++---
 tools/perf/ui/libslang.h   |  5 +++++
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 85fbcd265351..17b81bc403e4 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -637,9 +637,14 @@ endif
 
 ifndef NO_SLANG
   ifneq ($(feature-libslang), 1)
-    msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
-    NO_SLANG := 1
-  else
+    ifneq ($(feature-libslang-include-subdir), 1)
+      msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
+      NO_SLANG := 1
+    else
+      CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
+    endif
+  endif
+  ifndef NO_SLANG
     # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
     CFLAGS += -I/usr/include/slang
     CFLAGS += -DHAVE_SLANG_SUPPORT
diff --git a/tools/perf/ui/libslang.h b/tools/perf/ui/libslang.h
index c0686cda39a5..991e692b9b46 100644
--- a/tools/perf/ui/libslang.h
+++ b/tools/perf/ui/libslang.h
@@ -10,7 +10,12 @@
 #ifndef HAVE_LONG_LONG
 #define HAVE_LONG_LONG __GLIBC_HAVE_LONG_LONG
 #endif
+
+#ifdef HAVE_SLANG_INCLUDE_SUBDIR
+#include <slang/slang.h>
+#else
 #include <slang.h>
+#endif
 
 #if SLANG_VERSION < 20104
 #define slsmg_printf(msg, args...) \
-- 
2.20.1

[PATCH AUTOSEL 5.2 126/249] PCI: Add missing link delays required by the PCIe spec

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit c2bf1fc212f7e6f25ace1af8f0b3ac061ea48ba5 ]

Currently Linux does not follow PCIe spec regarding the required delays
after reset. A concrete example is a Thunderbolt add-in-card that
consists of a PCIe switch and two PCIe endpoints:

  +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller
                                  +-01.0-[04-36]-- DS hotplug port
                                  +-02.0-[37]----00.0 xHCI controller
                                  \-04.0-[38-6b]-- DS hotplug port

The root port (1b.0) and the PCIe switch downstream ports are all PCIe
gen3 so they support 8GT/s link speeds.

We wait for the PCIe hierarchy to enter D3cold (runtime):

  pcieport 0000:00:1b.0: power state changed by ACPI to D3cold

When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the
PCIe switch is put to reset and its power is re-applied. This means that
we must follow the rules in PCIe 4.0 section 6.6.1.

For the PCIe gen3 ports we are dealing with here, the following applies:

  With a Downstream Port that supports Link speeds greater than 5.0
  GT/s, software must wait a minimum of 100 ms after Link training
  completes before sending a Configuration Request to the device
  immediately below that Port. Software can determine when Link training
  completes by polling the Data Link Layer Link Active bit or by setting
  up an associated interrupt (see Section 6.7.3.3).

Translating this into the above topology we would need to do this (DLLLA
stands for Data Link Layer Link Active):

  pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0
  pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0
  pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0

I've instrumented the kernel with additional logging so we can see the
actual delays the kernel performs:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms
  pcieport 0000:00:1b.0: waking up bus
  pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:00:1b.0: PME# disabled
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:01:00.0: PME# disabled
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:00.0: PME# disabled
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:01.0: PME# disabled
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: PME# disabled
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:04.0: PME# disabled
  pcieport 0000:02:01.0: PME# enabled
  pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms
  pcieport 0000:02:04.0: PME# enabled
  pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)
  ...
  thunderbolt 0000:03:00.0: PME# disabled
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  xhci_hcd 0000:37:00.0: PME# disabled

For the switch upstream port (01:00.0) we wait for 100ms but not taking
into account the DLLLA requirement. We then wait 10ms for D3hot -> D0
transition of the root port and the two downstream hotplug ports. This
means that we deviate from what the spec requires.

Performing the same check for system sleep (s2idle) transitions we can
see following when resuming from s2idle:

  pcieport 0000:00:1b.0: power state changed by ACPI to D0
  pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60)
  ...
  pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  ...
  pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff)
  pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0)
  pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60)
  pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001)
  pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0)
  pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702)
  pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001)
  pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00)
  pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1)
  pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400)
  pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151)
  pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00)
  pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161)
  pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402)
  pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1)
  pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802)
  pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302)
  pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020)
  pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407)
  xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000)
  ...
  thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000)

This is even worse. None of the mandatory delays are performed. If this
would be S3 instead of s2idle then according to PCI FW spec 3.2 section
4.6.8.  there is a specific _DSM that allows the OS to skip the delays
but this platform does not provide the _DSM and does not go to S3 anyway
so no firmware is involved that could already handle these delays.

In this particular Intel Coffee Lake platform these delays are not
actually needed because there is an additional delay as part of the ACPI
power resource that is used to turn on power to the hierarchy but since
that additional delay is not required by any of standards (PCIe, ACPI)
it is not present in the Intel Ice Lake, for example where missing the
mandatory delays causes pciehp to start tearing down the stack too early
(links are not yet trained).

For this reason, change the PCIe portdrv PM resume hooks so that they
perform the mandatory delays before the downstream component gets
resumed. We perform the delays before port services are resumed because
otherwise pciehp might find that the link is not up (even if it is just
training) and tears-down the hierarchy.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c               | 29 ++++++++++-----
 drivers/pci/pci.h               |  1 +
 drivers/pci/pcie/portdrv_core.c | 66 +++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8abc843b1615..87a1f902fa8e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1004,15 +1004,10 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 	if (state == PCI_D0) {
 		pci_platform_power_transition(dev, PCI_D0);
 		/*
-		 * Mandatory power management transition delays, see
-		 * PCI Express Base Specification Revision 2.0 Section
-		 * 6.6.1: Conventional Reset.  Do not delay for
-		 * devices powered on/off by corresponding bridge,
-		 * because have already delayed for the bridge.
+		 * Mandatory power management transition delays are
+		 * handled in the PCIe portdrv resume hooks.
 		 */
 		if (dev->runtime_d3cold) {
-			if (dev->d3cold_delay && !dev->imm_ready)
-				msleep(dev->d3cold_delay);
 			/*
 			 * When powering on a bridge from D3cold, the
 			 * whole hierarchy may be powered on into
@@ -4568,14 +4563,16 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
 
 	return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS);
 }
+
 /**
- * pcie_wait_for_link - Wait until link is active or inactive
+ * pcie_wait_for_link_delay - Wait until link is active or inactive
  * @pdev: Bridge device
  * @active: waiting for active or inactive?
+ * @delay: Delay to wait after link has become active (in ms)
  *
  * Use this to wait till link becomes active or inactive.
  */
-bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay)
 {
 	int timeout = 1000;
 	bool ret;
@@ -4612,13 +4609,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
 		timeout -= 10;
 	}
 	if (active && ret)
-		msleep(100);
+		msleep(delay);
 	else if (ret != active)
 		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
 			active ? "set" : "cleared");
 	return ret == active;
 }
 
+/**
+ * pcie_wait_for_link - Wait until link is active or inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	return pcie_wait_for_link_delay(pdev, active, 100);
+}
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 9cb99380c61e..59802b3def4b 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -493,6 +493,7 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev)
 void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 		      u32 service);
 
+bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay);
 bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 1b330129089f..308c3e0c4a34 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -378,6 +379,67 @@ static int pm_iter(struct device *dev, void *data)
 	return 0;
 }
 
+static int get_downstream_delay(struct pci_bus *bus)
+{
+	struct pci_dev *pdev;
+	int min_delay = 100;
+	int max_delay = 0;
+
+	list_for_each_entry(pdev, &bus->devices, bus_list) {
+		if (!pdev->imm_ready)
+			min_delay = 0;
+		else if (pdev->d3cold_delay < min_delay)
+			min_delay = pdev->d3cold_delay;
+		if (pdev->d3cold_delay > max_delay)
+			max_delay = pdev->d3cold_delay;
+	}
+
+	return max(min_delay, max_delay);
+}
+
+/*
+ * wait_for_downstream_link - Wait for downstream link to establish
+ * @pdev: PCIe port whose downstream link is waited
+ *
+ * Handle delays according to PCIe 4.0 section 6.6.1 before configuration
+ * access to the downstream component is permitted.
+ *
+ * This blocks PCI core resume of the hierarchy below this port until the
+ * link is trained. Should be called before resuming port services to
+ * prevent pciehp from starting to tear-down the hierarchy too soon.
+ */
+static void wait_for_downstream_link(struct pci_dev *pdev)
+{
+	int delay;
+
+	if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
+	    pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
+		return;
+
+	if (pci_dev_is_disconnected(pdev))
+		return;
+
+	if (!pdev->subordinate || list_empty(&pdev->subordinate->devices) ||
+	    !pdev->bridge_d3)
+		return;
+
+	delay = get_downstream_delay(pdev->subordinate);
+	if (!delay)
+		return;
+
+	dev_dbg(&pdev->dev, "waiting downstream link for %d ms\n", delay);
+
+	/*
+	 * If downstream port does not support speeds greater than 5 GT/s
+	 * need to wait 100ms. For higher speeds (gen3) we need to wait
+	 * first for the data link layer to become active.
+	 */
+	if (pcie_get_speed_cap(pdev) <= PCIE_SPEED_5_0GT)
+		msleep(delay);
+	else
+		pcie_wait_for_link_delay(pdev, true, delay);
+}
+
 /**
  * pcie_port_device_suspend - suspend port services associated with a PCIe port
  * @dev: PCI Express port to handle
@@ -391,6 +453,8 @@ int pcie_port_device_suspend(struct device *dev)
 int pcie_port_device_resume_noirq(struct device *dev)
 {
 	size_t off = offsetof(struct pcie_port_service_driver, resume_noirq);
+
+	wait_for_downstream_link(to_pci_dev(dev));
 	return device_for_each_child(dev, &off, pm_iter);
 }
 
@@ -421,6 +485,8 @@ int pcie_port_device_runtime_suspend(struct device *dev)
 int pcie_port_device_runtime_resume(struct device *dev)
 {
 	size_t off = offsetof(struct pcie_port_service_driver, runtime_resume);
+
+	wait_for_downstream_link(to_pci_dev(dev));
 	return device_for_each_child(dev, &off, pm_iter);
 }
 #endif /* PM */
-- 
2.20.1

[PATCH AUTOSEL 5.2 127/249] net: netsec: initialize tx ring on ndo_open

[Sasha Levin]

From: Ilias Apalodimas <ilias.apalodimas@linaro.org>

[ Upstream commit 39e3622edeffa63c2871153d8743c5825b139968 ]

Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors

Changes since v1:
- Typo fixes

Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/socionext/netsec.c | 32 ++++++++++++++-----------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index cba5881b2746..a10ef700f16d 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1029,7 +1029,6 @@ static void netsec_free_dring(struct netsec_priv *priv, int id)
 static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[id];
-	int i;
 
 	dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM,
 					  &dring->desc_dma, GFP_KERNEL);
@@ -1040,19 +1039,6 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	if (!dring->desc)
 		goto err;
 
-	if (id == NETSEC_RING_TX) {
-		for (i = 0; i < DESC_NUM; i++) {
-			struct netsec_de *de;
-
-			de = dring->vaddr + (DESC_SZ * i);
-			/* de->attr is not going to be accessed by the NIC
-			 * until netsec_set_tx_de() is called.
-			 * No need for a dma_wmb() here
-			 */
-			de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
-		}
-	}
-
 	return 0;
 err:
 	netsec_free_dring(priv, id);
@@ -1060,6 +1046,23 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
 	return -ENOMEM;
 }
 
+static void netsec_setup_tx_dring(struct netsec_priv *priv)
+{
+	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX];
+	int i;
+
+	for (i = 0; i < DESC_NUM; i++) {
+		struct netsec_de *de;
+
+		de = dring->vaddr + (DESC_SZ * i);
+		/* de->attr is not going to be accessed by the NIC
+		 * until netsec_set_tx_de() is called.
+		 * No need for a dma_wmb() here
+		 */
+		de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
+	}
+}
+
 static int netsec_setup_rx_dring(struct netsec_priv *priv)
 {
 	struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX];
@@ -1361,6 +1364,7 @@ static int netsec_netdev_open(struct net_device *ndev)
 
 	pm_runtime_get_sync(priv->dev);
 
+	netsec_setup_tx_dring(priv);
 	ret = netsec_setup_rx_dring(priv);
 	if (ret) {
 		netif_err(priv, probe, priv->ndev,
-- 
2.20.1

[PATCH AUTOSEL 5.2 128/249] x86/cacheinfo: Fix a -Wtype-limits warning

[Sasha Levin]

From: Qian Cai <cai@lca.pw>

[ Upstream commit 1b7aebf0487613033aff26420e32fa2076d52846 ]

cpuinfo_x86.x86_model is an unsigned type, so comparing against zero
will generate a compilation warning:

  arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id':
  arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \
    due to limited range of data type [-Wtype-limits]

Remove the unnecessary lower bound check.

 [ bp: Massage. ]

Fixes: 68091ee7ac3c ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/cacheinfo.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index 395d46f78582..c7503be92f35 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -658,8 +658,7 @@ void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, int cpu, u8 node_id)
 	if (c->x86 < 0x17) {
 		/* LLC is at the node level. */
 		per_cpu(cpu_llc_id, cpu) = node_id;
-	} else if (c->x86 == 0x17 &&
-		   c->x86_model >= 0 && c->x86_model <= 0x1F) {
+	} else if (c->x86 == 0x17 && c->x86_model <= 0x1F) {
 		/*
 		 * LLC is at the core complex level.
 		 * Core complex ID is ApicId[3] for these processors.
-- 
2.20.1

[PATCH AUTOSEL 5.2 129/249] blk-iolatency: only account submitted bios

[Sasha Levin]

From: Dennis Zhou <dennis@kernel.org>

[ Upstream commit a3fb01ba5af066521f3f3421839e501bb2c71805 ]

As is, iolatency recognizes done_bio and cleanup as ending paths. If a
request is marked REQ_NOWAIT and fails to get a request, the bio is
cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
This results in underflowing the inflight counter. Fix this by only
accounting bios that were actually submitted.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iolatency.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c
index d22e61bced86..c91b84bb9d0a 100644
--- a/block/blk-iolatency.c
+++ b/block/blk-iolatency.c
@@ -600,6 +600,10 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
 	if (!blkg || !bio_flagged(bio, BIO_TRACKED))
 		return;
 
+	/* We didn't actually submit this bio, don't account it. */
+	if (bio->bi_status == BLK_STS_AGAIN)
+		return;
+
 	iolat = blkg_to_lat(bio->bi_blkg);
 	if (!iolat)
 		return;
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 129/249] blk-iolatency: only account submitted bios

[Dennis Zhou]

On Mon, Jul 15, 2019 at 09:44:54AM -0400, Sasha Levin wrote:
> From: Dennis Zhou <dennis@kernel.org>
> 
> [ Upstream commit a3fb01ba5af066521f3f3421839e501bb2c71805 ]
> 
> As is, iolatency recognizes done_bio and cleanup as ending paths. If a
> request is marked REQ_NOWAIT and fails to get a request, the bio is
> cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
> This results in underflowing the inflight counter. Fix this by only
> accounting bios that were actually submitted.
> 
> Signed-off-by: Dennis Zhou <dennis@kernel.org>
> Cc: Josef Bacik <josef@toxicpanda.com>
> Signed-off-by: Jens Axboe <axboe@kernel.dk>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  block/blk-iolatency.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c
> index d22e61bced86..c91b84bb9d0a 100644
> --- a/block/blk-iolatency.c
> +++ b/block/blk-iolatency.c
> @@ -600,6 +600,10 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
>  	if (!blkg || !bio_flagged(bio, BIO_TRACKED))
>  		return;
>  
> +	/* We didn't actually submit this bio, don't account it. */
> +	if (bio->bi_status == BLK_STS_AGAIN)
> +		return;
> +
>  	iolat = blkg_to_lat(bio->bi_blkg);
>  	if (!iolat)
>  		return;
> -- 
> 2.20.1
> 

Hi Sasha,

If you're going to pick this up, c9b3007feca0 ("blk-iolatency: fix
STS_AGAIN handling") fixes this patch, so please pick that up too.

Thanks,
Dennis

Re: [PATCH AUTOSEL 5.2 129/249] blk-iolatency: only account submitted bios

[Sasha Levin]

On Mon, Jul 15, 2019 at 03:58:06PM -0400, Dennis Zhou wrote:
>On Mon, Jul 15, 2019 at 09:44:54AM -0400, Sasha Levin wrote:
>> From: Dennis Zhou <dennis@kernel.org>
>>
>> [ Upstream commit a3fb01ba5af066521f3f3421839e501bb2c71805 ]
>>
>> As is, iolatency recognizes done_bio and cleanup as ending paths. If a
>> request is marked REQ_NOWAIT and fails to get a request, the bio is
>> cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error().
>> This results in underflowing the inflight counter. Fix this by only
>> accounting bios that were actually submitted.
>>
>> Signed-off-by: Dennis Zhou <dennis@kernel.org>
>> Cc: Josef Bacik <josef@toxicpanda.com>
>> Signed-off-by: Jens Axboe <axboe@kernel.dk>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  block/blk-iolatency.c | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/block/blk-iolatency.c b/block/blk-iolatency.c
>> index d22e61bced86..c91b84bb9d0a 100644
>> --- a/block/blk-iolatency.c
>> +++ b/block/blk-iolatency.c
>> @@ -600,6 +600,10 @@ static void blkcg_iolatency_done_bio(struct rq_qos *rqos, struct bio *bio)
>>  	if (!blkg || !bio_flagged(bio, BIO_TRACKED))
>>  		return;
>>
>> +	/* We didn't actually submit this bio, don't account it. */
>> +	if (bio->bi_status == BLK_STS_AGAIN)
>> +		return;
>> +
>>  	iolat = blkg_to_lat(bio->bi_blkg);
>>  	if (!iolat)
>>  		return;
>> --
>> 2.20.1
>>
>
>Hi Sasha,
>
>If you're going to pick this up, c9b3007feca0 ("blk-iolatency: fix
>STS_AGAIN handling") fixes this patch, so please pick that up too.

I've picked it up, thanks!

--
Thanks,
Sasha

[PATCH AUTOSEL 5.2 130/249] ACPICA: Clear status of GPEs on first direct enable

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 44758bafa53602f2581a6857bb20b55d4d8ad5b2 ]

ACPI GPEs (other than the EC one) can be enabled in two situations.
First, the GPEs with existing _Lxx and _Exx methods are enabled
implicitly by ACPICA during system initialization.  Second, the
GPEs without these methods (like GPEs listed by _PRW objects for
wakeup devices) need to be enabled directly by the code that is
going to use them (e.g. ACPI power management or device drivers).

In the former case, if the status of a given GPE is set to start
with, its handler method (either _Lxx or _Exx) needs to be invoked
to take care of the events (possibly) signaled before the GPE was
enabled.  In the latter case, however, the first caller of
acpi_enable_gpe() for a given GPE should not be expected to care
about any events that might be signaled through it earlier.  In
that case, it is better to clear the status of the GPE before
enabling it, to prevent stale events from triggering unwanted
actions (like spurious system resume, for example).

For this reason, modify acpi_ev_add_gpe_reference() to take an
additional boolean argument indicating whether or not the GPE
status needs to be cleared when its reference counter changes from
zero to one and make acpi_enable_gpe() pass TRUE to it through
that new argument.

Fixes: 18996f2db918 ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume")
Reported-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@google.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/acevents.h | 3 ++-
 drivers/acpi/acpica/evgpe.c    | 8 +++++++-
 drivers/acpi/acpica/evgpeblk.c | 2 +-
 drivers/acpi/acpica/evxface.c  | 2 +-
 drivers/acpi/acpica/evxfgpe.c  | 2 +-
 5 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index 831660179662..c8652f91054e 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -69,7 +69,8 @@ acpi_status
 acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked);
 
 acpi_status
-acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info,
+			  u8 clear_on_enable);
 
 acpi_status
 acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 62d3aa74277b..344feba29063 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -146,6 +146,7 @@ acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked)
  * FUNCTION:    acpi_ev_add_gpe_reference
  *
  * PARAMETERS:  gpe_event_info          - Add a reference to this GPE
+ *              clear_on_enable         - Clear GPE status before enabling it
  *
  * RETURN:      Status
  *
@@ -155,7 +156,8 @@ acpi_ev_mask_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 is_masked)
  ******************************************************************************/
 
 acpi_status
-acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info,
+			  u8 clear_on_enable)
 {
 	acpi_status status = AE_OK;
 
@@ -170,6 +172,10 @@ acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 
 		/* Enable on first reference */
 
+		if (clear_on_enable) {
+			(void)acpi_hw_clear_gpe(gpe_event_info);
+		}
+
 		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
 		if (ACPI_SUCCESS(status)) {
 			status = acpi_ev_enable_gpe(gpe_event_info);
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 328d1d6123ad..fb15e9e2373b 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -453,7 +453,7 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 				continue;
 			}
 
-			status = acpi_ev_add_gpe_reference(gpe_event_info);
+			status = acpi_ev_add_gpe_reference(gpe_event_info, FALSE);
 			if (ACPI_FAILURE(status)) {
 				ACPI_EXCEPTION((AE_INFO, status,
 					"Could not enable GPE 0x%02X",
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 3df00eb6621b..279ef0557aa3 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -971,7 +971,7 @@ acpi_remove_gpe_handler(acpi_handle gpe_device,
 	      ACPI_GPE_DISPATCH_METHOD) ||
 	     (ACPI_GPE_DISPATCH_TYPE(handler->original_flags) ==
 	      ACPI_GPE_DISPATCH_NOTIFY)) && handler->originally_enabled) {
-		(void)acpi_ev_add_gpe_reference(gpe_event_info);
+		(void)acpi_ev_add_gpe_reference(gpe_event_info, FALSE);
 		if (ACPI_GPE_IS_POLLING_NEEDED(gpe_event_info)) {
 
 			/* Poll edge triggered GPEs to handle existing events */
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 30a083902f52..710488ec59e9 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -108,7 +108,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
 	if (gpe_event_info) {
 		if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
 		    ACPI_GPE_DISPATCH_NONE) {
-			status = acpi_ev_add_gpe_reference(gpe_event_info);
+			status = acpi_ev_add_gpe_reference(gpe_event_info, TRUE);
 			if (ACPI_SUCCESS(status) &&
 			    ACPI_GPE_IS_POLLING_NEEDED(gpe_event_info)) {
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 131/249] spi: fix ctrl->num_chipselect constraint

[Sasha Levin]

From: Tudor Ambarus <tudor.ambarus@microchip.com>

[ Upstream commit f9481b08220d7dc1ff21e296a330ee8b721b44e4 ]

at91sam9g25ek showed the following error at probe:
atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx)
for DMA transfers
atmel_spi: probe of f0000000.spi failed with error -22

Commit 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set")
moved the calling of spi_get_gpio_descs() after ctrl->dev is set,
but didn't move the !ctrl->num_chipselect check. When there are
chip selects in the device tree, the spi-atmel driver lets the
SPI core discover them when registering the SPI master.
The ctrl->num_chipselect is thus expected to be set by
spi_get_gpio_descs().

Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was
before the aforementioned commit. While touching this block, get rid
of the explicit comparison with 0 and update the commenting style.

Fixes: 0a919ae49223 ("spi: Don't call spi_get_gpio_descs() before device name is set")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 5e4654032bfa..29916e446143 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2286,11 +2286,6 @@ int spi_register_controller(struct spi_controller *ctlr)
 	if (status)
 		return status;
 
-	/* even if it's just one always-selected device, there must
-	 * be at least one chipselect
-	 */
-	if (ctlr->num_chipselect == 0)
-		return -EINVAL;
 	if (ctlr->bus_num >= 0) {
 		/* devices with a fixed bus num must check-in with the num */
 		mutex_lock(&board_lock);
@@ -2361,6 +2356,13 @@ int spi_register_controller(struct spi_controller *ctlr)
 		}
 	}
 
+	/*
+	 * Even if it's just one always-selected device, there must
+	 * be at least one chipselect.
+	 */
+	if (!ctlr->num_chipselect)
+		return -EINVAL;
+
 	status = device_add(&ctlr->dev);
 	if (status < 0) {
 		/* free bus id */
-- 
2.20.1

[PATCH AUTOSEL 5.2 132/249] EDAC/sysfs: Drop device references properly

[Sasha Levin]

From: Greg KH <gregkh@linuxfoundation.org>

[ Upstream commit 7adc05d2dc3af95e4e1534841d58f736262142cd ]

Do put_device() if device_add() fails.

 [ bp: do device_del() for the successfully created devices in
   edac_create_csrow_objects(), on the unwind path. ]

Signed-off-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20190427214925.GE16338@kroah.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_mc_sysfs.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 464174685589..bf9273437e3f 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -443,7 +443,8 @@ static int edac_create_csrow_objects(struct mem_ctl_info *mci)
 		csrow = mci->csrows[i];
 		if (!nr_pages_per_csrow(csrow))
 			continue;
-		put_device(&mci->csrows[i]->dev);
+
+		device_del(&mci->csrows[i]->dev);
 	}
 
 	return err;
@@ -645,9 +646,11 @@ static int edac_create_dimm_object(struct mem_ctl_info *mci,
 	dev_set_drvdata(&dimm->dev, dimm);
 	pm_runtime_forbid(&mci->dev);
 
-	err =  device_add(&dimm->dev);
+	err = device_add(&dimm->dev);
+	if (err)
+		put_device(&dimm->dev);
 
-	edac_dbg(0, "creating rank/dimm device %s\n", dev_name(&dimm->dev));
+	edac_dbg(0, "created rank/dimm device %s\n", dev_name(&dimm->dev));
 
 	return err;
 }
@@ -928,6 +931,7 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci,
 	err = device_add(&mci->dev);
 	if (err < 0) {
 		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
+		put_device(&mci->dev);
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 133/249] EDAC/sysfs: Fix memory leak when creating a csrow object

[Sasha Levin]

From: Pan Bian <bianpan2016@163.com>

[ Upstream commit 585fb3d93d32dbe89e718b85009f9c322cc554cd ]

In edac_create_csrow_object(), the reference to the object is not
released when adding the device to the device hierarchy fails
(device_add()). This may result in a memory leak.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Morse <james.morse@arm.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_mc_sysfs.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index bf9273437e3f..7c01e1cc030c 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -404,6 +404,8 @@ static inline int nr_pages_per_csrow(struct csrow_info *csrow)
 static int edac_create_csrow_object(struct mem_ctl_info *mci,
 				    struct csrow_info *csrow, int index)
 {
+	int err;
+
 	csrow->dev.type = &csrow_attr_type;
 	csrow->dev.groups = csrow_dev_groups;
 	device_initialize(&csrow->dev);
@@ -415,7 +417,11 @@ static int edac_create_csrow_object(struct mem_ctl_info *mci,
 	edac_dbg(0, "creating (virtual) csrow node %s\n",
 		 dev_name(&csrow->dev));
 
-	return device_add(&csrow->dev);
+	err = device_add(&csrow->dev);
+	if (err)
+		put_device(&csrow->dev);
+
+	return err;
 }
 
 /* Create a CSROW object under specifed edac_mc_device */
-- 
2.20.1

[PATCH AUTOSEL 5.2 134/249] nvme: fix possible io failures when removing multipathed ns

[Sasha Levin]

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit 2181e455612a8db2761eabbf126640552a451e96 ]

When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.

Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
  no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
  and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 120fb593d1da..22c68e3b71d5 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3344,6 +3344,14 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 		return;
 
 	nvme_fault_inject_fini(ns);
+
+	mutex_lock(&ns->ctrl->subsys->lock);
+	list_del_rcu(&ns->siblings);
+	mutex_unlock(&ns->ctrl->subsys->lock);
+	synchronize_rcu(); /* guarantee not available in head->list */
+	nvme_mpath_clear_current_path(ns);
+	synchronize_srcu(&ns->head->srcu); /* wait for concurrent submissions */
+
 	if (ns->disk && ns->disk->flags & GENHD_FL_UP) {
 		del_gendisk(ns->disk);
 		blk_cleanup_queue(ns->queue);
@@ -3351,16 +3359,10 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 			blk_integrity_unregister(ns->disk);
 	}
 
-	mutex_lock(&ns->ctrl->subsys->lock);
-	list_del_rcu(&ns->siblings);
-	nvme_mpath_clear_current_path(ns);
-	mutex_unlock(&ns->ctrl->subsys->lock);
-
 	down_write(&ns->ctrl->namespaces_rwsem);
 	list_del_init(&ns->list);
 	up_write(&ns->ctrl->namespaces_rwsem);
 
-	synchronize_srcu(&ns->head->srcu);
 	nvme_mpath_check_last_path(ns);
 	nvme_put_ns(ns);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 134/249] nvme: fix possible io failures when removing multipathed ns

[Sasha Levin]

From: Anton Eidelman <anton@lightbitslabs.com>

[ Upstream commit 2181e455612a8db2761eabbf126640552a451e96 ]

When a shared namespace is removed, we call blk_cleanup_queue()
when the device can still be accessed as the current path and this can
result in submission to a dying queue. Hence, direct_make_request()
called by our mpath device may fail (propagating the failure to userspace).
Instead, we want to failover this I/O to a different path if one exists.
Thus, before we cleanup the request queue, we make sure that the device is
cleared from the current path nor it can be selected again as such.

Fix this by:
- clear the ns from the head->list and synchronize rcu to make sure there is
  no concurrent path search that restores it as the current path
- clear the mpath current path in order to trigger a subsequent path search
  and sync srcu to wait for any ongoing request submissions
- safely continue to namespace removal and blk_cleanup_queue

Signed-off-by: Anton Eidelman <anton at lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi at grimberg.me>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/core.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 120fb593d1da..22c68e3b71d5 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3344,6 +3344,14 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 		return;
 
 	nvme_fault_inject_fini(ns);
+
+	mutex_lock(&ns->ctrl->subsys->lock);
+	list_del_rcu(&ns->siblings);
+	mutex_unlock(&ns->ctrl->subsys->lock);
+	synchronize_rcu(); /* guarantee not available in head->list */
+	nvme_mpath_clear_current_path(ns);
+	synchronize_srcu(&ns->head->srcu); /* wait for concurrent submissions */
+
 	if (ns->disk && ns->disk->flags & GENHD_FL_UP) {
 		del_gendisk(ns->disk);
 		blk_cleanup_queue(ns->queue);
@@ -3351,16 +3359,10 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 			blk_integrity_unregister(ns->disk);
 	}
 
-	mutex_lock(&ns->ctrl->subsys->lock);
-	list_del_rcu(&ns->siblings);
-	nvme_mpath_clear_current_path(ns);
-	mutex_unlock(&ns->ctrl->subsys->lock);
-
 	down_write(&ns->ctrl->namespaces_rwsem);
 	list_del_init(&ns->list);
 	up_write(&ns->ctrl->namespaces_rwsem);
 
-	synchronize_srcu(&ns->head->srcu);
 	nvme_mpath_check_last_path(ns);
 	nvme_put_ns(ns);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 135/249] nvme-pci: properly report state change failure in nvme_reset_work

[Sasha Levin]

From: Minwoo Im <minwoo.im.dev@gmail.com>

[ Upstream commit cee6c269b016ba89c62e34d6bccb103ee2c7de4f ]

If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:

  [  293.689160] nvme nvme0: failed to mark controller CONNECTING
  [  293.689160] nvme nvme0: Removing after probe failure status: 0

Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.

This patch makes it indicate the proper error value when it fails.
  [   25.932367] nvme nvme0: failed to mark controller CONNECTING
  [   25.932369] nvme nvme0: Removing after probe failure status: -16

This situation is able to be easily reproduced by:
  root@target:~# rmmod nvme && modprobe nvme && rmmod nvme

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 524d6bd6d095..385ba7a1e23b 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2528,6 +2528,7 @@ static void nvme_reset_work(struct work_struct *work)
 	if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_CONNECTING)) {
 		dev_warn(dev->ctrl.device,
 			"failed to mark controller CONNECTING\n");
+		result = -EBUSY;
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 135/249] nvme-pci: properly report state change failure in nvme_reset_work

[Sasha Levin]

From: Minwoo Im <minwoo.im.dev@gmail.com>

[ Upstream commit cee6c269b016ba89c62e34d6bccb103ee2c7de4f ]

If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to
be like:

  [  293.689160] nvme nvme0: failed to mark controller CONNECTING
  [  293.689160] nvme nvme0: Removing after probe failure status: 0

Even it prints the first line to indicate the situation, the second line
is not proper because the status is 0 which means normally success of
the previous operation.

This patch makes it indicate the proper error value when it fails.
  [   25.932367] nvme nvme0: failed to mark controller CONNECTING
  [   25.932369] nvme nvme0: Removing after probe failure status: -16

This situation is able to be easily reproduced by:
  root at target:~# rmmod nvme && modprobe nvme && rmmod nvme

Signed-off-by: Minwoo Im <minwoo.im.dev at gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 524d6bd6d095..385ba7a1e23b 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2528,6 +2528,7 @@ static void nvme_reset_work(struct work_struct *work)
 	if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_CONNECTING)) {
 		dev_warn(dev->ctrl.device,
 			"failed to mark controller CONNECTING\n");
+		result = -EBUSY;
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 136/249] nvme-pci: set the errno on ctrl state change error

[Sasha Levin]

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

[ Upstream commit e71afda49335620e3d9adf56015676db33a3bd86 ]

This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.

Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 385ba7a1e23b..544d095d44e5 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2480,11 +2480,13 @@ static void nvme_reset_work(struct work_struct *work)
 	struct nvme_dev *dev =
 		container_of(work, struct nvme_dev, ctrl.reset_work);
 	bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL);
-	int result = -ENODEV;
+	int result;
 	enum nvme_ctrl_state new_state = NVME_CTRL_LIVE;
 
-	if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING))
+	if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) {
+		result = -ENODEV;
 		goto out;
+	}
 
 	/*
 	 * If we're called to reset a live controller first shut it down before
@@ -2589,6 +2591,7 @@ static void nvme_reset_work(struct work_struct *work)
 	if (!nvme_change_ctrl_state(&dev->ctrl, new_state)) {
 		dev_warn(dev->ctrl.device,
 			"failed to mark controller state %d\n", new_state);
+		result = -ENODEV;
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 136/249] nvme-pci: set the errno on ctrl state change error

[Sasha Levin]

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

[ Upstream commit e71afda49335620e3d9adf56015676db33a3bd86 ]

This patch removes the confusing assignment of the variable result at
the time of declaration and sets the value in error cases next to the
places where the actual error is happening.

Here we also set the result value to -ENODEV when we fail at the final
ctrl state transition in nvme_reset_work(). Without this assignment
result will hold 0 from nvme_setup_io_queue() and on failure 0 will be
passed to he nvme_remove_dead_ctrl() from final state transition.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni at wdc.com>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/pci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 385ba7a1e23b..544d095d44e5 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2480,11 +2480,13 @@ static void nvme_reset_work(struct work_struct *work)
 	struct nvme_dev *dev =
 		container_of(work, struct nvme_dev, ctrl.reset_work);
 	bool was_suspend = !!(dev->ctrl.ctrl_config & NVME_CC_SHN_NORMAL);
-	int result = -ENODEV;
+	int result;
 	enum nvme_ctrl_state new_state = NVME_CTRL_LIVE;
 
-	if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING))
+	if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)) {
+		result = -ENODEV;
 		goto out;
+	}
 
 	/*
 	 * If we're called to reset a live controller first shut it down before
@@ -2589,6 +2591,7 @@ static void nvme_reset_work(struct work_struct *work)
 	if (!nvme_change_ctrl_state(&dev->ctrl, new_state)) {
 		dev_warn(dev->ctrl.device,
 			"failed to mark controller state %d\n", new_state);
+		result = -ENODEV;
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 137/249] lightnvm: pblk: fix freeing of merged pages

[Sasha Levin]

From: Heiner Litz <hlitz@ucsc.edu>

[ Upstream commit 510fd8ea98fcb586c01aef93d87c060a159ac30a ]

bio_add_pc_page() may merge pages when a bio is padded due to a flush.
Fix iteration over the bio to free the correct pages in case of a merge.

Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/lightnvm/pblk-core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/lightnvm/pblk-core.c b/drivers/lightnvm/pblk-core.c
index 773537804319..f546e6f28b8a 100644
--- a/drivers/lightnvm/pblk-core.c
+++ b/drivers/lightnvm/pblk-core.c
@@ -323,14 +323,16 @@ void pblk_free_rqd(struct pblk *pblk, struct nvm_rq *rqd, int type)
 void pblk_bio_free_pages(struct pblk *pblk, struct bio *bio, int off,
 			 int nr_pages)
 {
-	struct bio_vec bv;
-	int i;
-
-	WARN_ON(off + nr_pages != bio->bi_vcnt);
-
-	for (i = off; i < nr_pages + off; i++) {
-		bv = bio->bi_io_vec[i];
-		mempool_free(bv.bv_page, &pblk->page_bio_pool);
+	struct bio_vec *bv;
+	struct page *page;
+	int i, e, nbv = 0;
+
+	for (i = 0; i < bio->bi_vcnt; i++) {
+		bv = &bio->bi_io_vec[i];
+		page = bv->bv_page;
+		for (e = 0; e < bv->bv_len; e += PBLK_EXPOSED_PAGE_SIZE, nbv++)
+			if (nbv >= off)
+				mempool_free(page++, &pblk->page_bio_pool);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 138/249] lightnvm: fix uninitialized pointer in nvm_remove_tgt()

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 2f5af4ab7de14bd35f3435e6a47300276bbb6c17 ]

With gcc 4.1:

    drivers/lightnvm/core.c: In function ‘nvm_remove_tgt’:
    drivers/lightnvm/core.c:510: warning: ‘t’ is used uninitialized in this function

Indeed, if no NVM devices have been registered, t will be an
uninitialized pointer, and may be dereferenced later.  A call to
nvm_remove_tgt() can be triggered from userspace by issuing the
NVM_DEV_REMOVE ioctl on the lightnvm control device.

Fix this by preinitializing t to NULL.

Fixes: 843f2edbdde085b4 ("lightnvm: do not remove instance under global lock")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/lightnvm/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/lightnvm/core.c b/drivers/lightnvm/core.c
index 7d555b110ecd..a600934fdd9c 100644
--- a/drivers/lightnvm/core.c
+++ b/drivers/lightnvm/core.c
@@ -478,7 +478,7 @@ static void __nvm_remove_target(struct nvm_target *t, bool graceful)
  */
 static int nvm_remove_tgt(struct nvm_ioctl_remove *remove)
 {
-	struct nvm_target *t;
+	struct nvm_target *t = NULL;
 	struct nvm_dev *dev;
 
 	down_read(&nvm_lock);
-- 
2.20.1

[PATCH AUTOSEL 5.2 139/249] nvme-pci: adjust irq max_vector using num_possible_cpus()

[Sasha Levin]

From: Minwoo Im <minwoo.im.dev@gmail.com>

[ Upstream commit dad77d63903e91a2e97a0c984cabe5d36e91ba60 ]

If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039         affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;

It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220         if (nr_present < numvecs)
221                 WARN_ON(nr_present + nr_others < numvecs);

This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().

[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root@target:~/nvme# nproc
8
root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[   17.925326] nvme nvme0: pci function 0000:00:04.0
[   17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[   17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[   17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G        W         5.1.0+ #156
[   17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[   17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[   17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[   17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[   17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[   17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[   17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[   17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[   17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[   17.940614] FS:  0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[   17.940616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[   17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   17.940618] Call Trace:
[   17.940622]  __pci_enable_msix_range+0x215/0x540
[   17.940623]  ? kernfs_put+0x117/0x160
[   17.940625]  pci_alloc_irq_vectors_affinity+0x74/0x110
[   17.940626]  nvme_reset_work+0xc30/0x1397 [nvme]
[   17.940628]  ? __switch_to_asm+0x34/0x70
[   17.940628]  ? __switch_to_asm+0x40/0x70
[   17.940629]  ? __switch_to_asm+0x34/0x70
[   17.940630]  ? __switch_to_asm+0x40/0x70
[   17.940630]  ? __switch_to_asm+0x34/0x70
[   17.940631]  ? __switch_to_asm+0x40/0x70
[   17.940632]  ? nvme_irq_check+0x30/0x30 [nvme]
[   17.940633]  process_one_work+0x20b/0x3e0
[   17.940634]  worker_thread+0x1f9/0x3d0
[   17.940635]  ? cancel_delayed_work+0xa0/0xa0
[   17.940636]  kthread+0x117/0x120
[   17.940637]  ? kthread_stop+0xf0/0xf0
[   17.940638]  ret_from_fork+0x3a/0x50
[   17.940639] ---[ end trace aca8a131361cd42a ]---
[   17.942124] nvme nvme0: 7/1/0 default/read/poll queues

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 544d095d44e5..f5bc1c30cef5 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2068,6 +2068,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		.priv		= dev,
 	};
 	unsigned int irq_queues, this_p_queues;
+	unsigned int nr_cpus = num_possible_cpus();
 
 	/*
 	 * Poll queues don't need interrupts, but we need at least one IO
@@ -2078,7 +2079,10 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		this_p_queues = nr_io_queues - 1;
 		irq_queues = 1;
 	} else {
-		irq_queues = nr_io_queues - this_p_queues + 1;
+		if (nr_cpus < nr_io_queues - this_p_queues)
+			irq_queues = nr_cpus + 1;
+		else
+			irq_queues = nr_io_queues - this_p_queues + 1;
 	}
 	dev->io_queues[HCTX_TYPE_POLL] = this_p_queues;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 139/249] nvme-pci: adjust irq max_vector using num_possible_cpus()

[Sasha Levin]

From: Minwoo Im <minwoo.im.dev@gmail.com>

[ Upstream commit dad77d63903e91a2e97a0c984cabe5d36e91ba60 ]

If the "irq_queues" are greater than num_possible_cpus(),
nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater
than it can be afforded.
2039         affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues;

It might cause a WARN() from the irq_build_affinity_masks() like [1]:
220         if (nr_present < numvecs)
221                 WARN_ON(nr_present + nr_others < numvecs);

This patch prevents it from the WARN() by adjusting the max_vector value
from the nvme_setup_irqs().

[1] WARN messages when modprobe nvme write_queues=32 poll_queues=0:
root at target:~/nvme# nproc
8
root at target:~/nvme# modprobe nvme write_queues=32 poll_queues=0
[   17.925326] nvme nvme0: pci function 0000:00:04.0
[   17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330
[   17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme]
[   17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G        W         5.1.0+ #156
[   17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[   17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme]
[   17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330
[   17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01
[   17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216
[   17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000
[   17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000
[   17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70
[   17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020
[   17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800
[   17.940614] FS:  0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000
[   17.940616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0
[   17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   17.940618] Call Trace:
[   17.940622]  __pci_enable_msix_range+0x215/0x540
[   17.940623]  ? kernfs_put+0x117/0x160
[   17.940625]  pci_alloc_irq_vectors_affinity+0x74/0x110
[   17.940626]  nvme_reset_work+0xc30/0x1397 [nvme]
[   17.940628]  ? __switch_to_asm+0x34/0x70
[   17.940628]  ? __switch_to_asm+0x40/0x70
[   17.940629]  ? __switch_to_asm+0x34/0x70
[   17.940630]  ? __switch_to_asm+0x40/0x70
[   17.940630]  ? __switch_to_asm+0x34/0x70
[   17.940631]  ? __switch_to_asm+0x40/0x70
[   17.940632]  ? nvme_irq_check+0x30/0x30 [nvme]
[   17.940633]  process_one_work+0x20b/0x3e0
[   17.940634]  worker_thread+0x1f9/0x3d0
[   17.940635]  ? cancel_delayed_work+0xa0/0xa0
[   17.940636]  kthread+0x117/0x120
[   17.940637]  ? kthread_stop+0xf0/0xf0
[   17.940638]  ret_from_fork+0x3a/0x50
[   17.940639] ---[ end trace aca8a131361cd42a ]---
[   17.942124] nvme nvme0: 7/1/0 default/read/poll queues

Signed-off-by: Minwoo Im <minwoo.im.dev at gmail.com>
Signed-off-by: Christoph Hellwig <hch at lst.de>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/nvme/host/pci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 544d095d44e5..f5bc1c30cef5 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2068,6 +2068,7 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		.priv		= dev,
 	};
 	unsigned int irq_queues, this_p_queues;
+	unsigned int nr_cpus = num_possible_cpus();
 
 	/*
 	 * Poll queues don't need interrupts, but we need at least one IO
@@ -2078,7 +2079,10 @@ static int nvme_setup_irqs(struct nvme_dev *dev, unsigned int nr_io_queues)
 		this_p_queues = nr_io_queues - 1;
 		irq_queues = 1;
 	} else {
-		irq_queues = nr_io_queues - this_p_queues + 1;
+		if (nr_cpus < nr_io_queues - this_p_queues)
+			irq_queues = nr_cpus + 1;
+		else
+			irq_queues = nr_io_queues - this_p_queues + 1;
 	}
 	dev->io_queues[HCTX_TYPE_POLL] = this_p_queues;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 140/249] arm64: Do not enable IRQs for ct_user_exit

[Sasha Levin]

From: Julien Thierry <julien.thierry@arm.com>

[ Upstream commit 9034f6251572a4744597c51dea5ab73a55f2b938 ]

For el0_dbg and el0_error, DAIF bits get explicitly cleared before
calling ct_user_exit.

When context tracking is disabled, DAIF gets set (almost) immediately
after. When context tracking is enabled, among the first things done
is disabling IRQs.

What is actually needed is:
- PSR.D = 0 so the system can be debugged (should be already the case)
- PSR.A = 0 so async error can be handled during context tracking

Do not clear PSR.I in those two locations.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/entry.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 2df8d0a1d980..dbe467686332 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -859,7 +859,7 @@ el0_dbg:
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_debug_exception
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 el0_inv:
@@ -911,7 +911,7 @@ el0_error_naked:
 	enable_dbg
 	mov	x0, sp
 	bl	do_serror
-	enable_daif
+	enable_da_f
 	ct_user_exit
 	b	ret_to_user
 ENDPROC(el0_error)
-- 
2.20.1

[PATCH AUTOSEL 5.2 141/249] ipsec: select crypto ciphers for xfrm_algo

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 597179b0ba550bd83fab1a9d57c42a9343c58514 ]

kernelci.org reports failed builds on arc because of what looks
like an old missed 'select' statement:

net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs':
xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash'

I don't see this in randconfig builds on other architectures, but
it's fairly clear we want to select the hash code for it, like we
do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER
is also required even though it has not popped up in build tests.

Fixes: 17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/xfrm/Kconfig b/net/xfrm/Kconfig
index c967fc3c38c8..51bb6018f3bf 100644
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
@@ -15,6 +15,8 @@ config XFRM_ALGO
 	tristate
 	select XFRM
 	select CRYPTO
+	select CRYPTO_HASH
+	select CRYPTO_BLKCIPHER
 
 if INET
 config XFRM_USER
-- 
2.20.1

[PATCH AUTOSEL 5.2 142/249] media: staging: davinci: fix memory leaks and check for allocation failure

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a84e355ecd3ed9759d7aaa40170aab78e2a68a06 ]

There are three error return paths that don't kfree params causing a
memory leak.  Fix this by adding an error return path that kfree's
params before returning.  Also add a check to see params failed to
be allocated.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
index 30e2edc0cec5..b88855c7ffe8 100644
--- a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
+++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
@@ -1251,10 +1251,10 @@ static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
 	struct vpfe_ipipe_device *ipipe = v4l2_get_subdevdata(sd);
 	unsigned int i;
 	int rval = 0;
+	struct ipipe_module_params *params;
 
 	for (i = 0; i < ARRAY_SIZE(ipipe_modules); i++) {
 		const struct ipipe_module_if *module_if;
-		struct ipipe_module_params *params;
 		void *from, *to;
 		size_t size;
 
@@ -1265,25 +1265,30 @@ static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
 		from = *(void **)((void *)cfg + module_if->config_offset);
 
 		params = kmalloc(sizeof(*params), GFP_KERNEL);
+		if (!params)
+			return -ENOMEM;
 		to = (void *)params + module_if->param_offset;
 		size = module_if->param_size;
 
 		if (to && from && size) {
 			if (copy_from_user(to, (void __user *)from, size)) {
 				rval = -EFAULT;
-				break;
+				goto error_free;
 			}
 			rval = module_if->set(ipipe, to);
 			if (rval)
-				goto error;
+				goto error_free;
 		} else if (to && !from && size) {
 			rval = module_if->set(ipipe, NULL);
 			if (rval)
-				goto error;
+				goto error_free;
 		}
 		kfree(params);
 	}
-error:
+	return rval;
+
+error_free:
+	kfree(params);
 	return rval;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 142/249] media: staging: davinci: fix memory leaks and check for allocation failure

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit a84e355ecd3ed9759d7aaa40170aab78e2a68a06 ]

There are three error return paths that don't kfree params causing a
memory leak.  Fix this by adding an error return path that kfree's
params before returning.  Also add a check to see params failed to
be allocated.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/davinci_vpfe/dm365_ipipe.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
index 30e2edc0cec5..b88855c7ffe8 100644
--- a/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
+++ b/drivers/staging/media/davinci_vpfe/dm365_ipipe.c
@@ -1251,10 +1251,10 @@ static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
 	struct vpfe_ipipe_device *ipipe = v4l2_get_subdevdata(sd);
 	unsigned int i;
 	int rval = 0;
+	struct ipipe_module_params *params;
 
 	for (i = 0; i < ARRAY_SIZE(ipipe_modules); i++) {
 		const struct ipipe_module_if *module_if;
-		struct ipipe_module_params *params;
 		void *from, *to;
 		size_t size;
 
@@ -1265,25 +1265,30 @@ static int ipipe_s_config(struct v4l2_subdev *sd, struct vpfe_ipipe_config *cfg)
 		from = *(void **)((void *)cfg + module_if->config_offset);
 
 		params = kmalloc(sizeof(*params), GFP_KERNEL);
+		if (!params)
+			return -ENOMEM;
 		to = (void *)params + module_if->param_offset;
 		size = module_if->param_size;
 
 		if (to && from && size) {
 			if (copy_from_user(to, (void __user *)from, size)) {
 				rval = -EFAULT;
-				break;
+				goto error_free;
 			}
 			rval = module_if->set(ipipe, to);
 			if (rval)
-				goto error;
+				goto error_free;
 		} else if (to && !from && size) {
 			rval = module_if->set(ipipe, NULL);
 			if (rval)
-				goto error;
+				goto error_free;
 		}
 		kfree(params);
 	}
-error:
+	return rval;
+
+error_free:
+	kfree(params);
 	return rval;
 }
 
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.2 143/249] ipvs: defer hook registration to avoid leaks

[Sasha Levin]

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit cf47a0b882a4e5f6b34c7949d7b293e9287f1972 ]

syzkaller reports for memory leak when registering hooks [1]

As we moved the nf_unregister_net_hooks() call into
__ip_vs_dev_cleanup(), defer the nf_register_net_hooks()
call, so that hooks are allocated and freed from same
pernet_operations (ipvs_core_dev_ops).

[1]
BUG: memory leak
unreferenced object 0xffff88810acd8a80 (size 96):
 comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s)
 hex dump (first 32 bytes):
   02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff  ........P.......
   00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff  .........w......
 backtrace:
   [<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline]
   [<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597
   [<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline]
   [<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627
   [<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline]
   [<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431
   [<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline]
   [<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline]
   [<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61
   [<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128
   [<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337
   [<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464
   [<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480
   [<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280
   [<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130
   [<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316
   [<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439
   [<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107
   [<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165
   [<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035
   [<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline]
   [<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369

Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com
Fixes: 719c7d563c17 ("ipvs: Fix use-after-free in ip_vs_in")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/ipvs/ip_vs_core.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 7138556b206b..d5103a9eb302 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -2245,7 +2245,6 @@ static const struct nf_hook_ops ip_vs_ops[] = {
 static int __net_init __ip_vs_init(struct net *net)
 {
 	struct netns_ipvs *ipvs;
-	int ret;
 
 	ipvs = net_generic(net, ip_vs_net_id);
 	if (ipvs == NULL)
@@ -2277,17 +2276,11 @@ static int __net_init __ip_vs_init(struct net *net)
 	if (ip_vs_sync_net_init(ipvs) < 0)
 		goto sync_fail;
 
-	ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
-	if (ret < 0)
-		goto hook_fail;
-
 	return 0;
 /*
  * Error handling
  */
 
-hook_fail:
-	ip_vs_sync_net_cleanup(ipvs);
 sync_fail:
 	ip_vs_conn_net_cleanup(ipvs);
 conn_fail:
@@ -2317,6 +2310,19 @@ static void __net_exit __ip_vs_cleanup(struct net *net)
 	net->ipvs = NULL;
 }
 
+static int __net_init __ip_vs_dev_init(struct net *net)
+{
+	int ret;
+
+	ret = nf_register_net_hooks(net, ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+	if (ret < 0)
+		goto hook_fail;
+	return 0;
+
+hook_fail:
+	return ret;
+}
+
 static void __net_exit __ip_vs_dev_cleanup(struct net *net)
 {
 	struct netns_ipvs *ipvs = net_ipvs(net);
@@ -2336,6 +2342,7 @@ static struct pernet_operations ipvs_core_ops = {
 };
 
 static struct pernet_operations ipvs_core_dev_ops = {
+	.init = __ip_vs_dev_init,
 	.exit = __ip_vs_dev_cleanup,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 144/249] media: s5p-mfc: Make additional clocks optional

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit e08efef8fe7db87206314c19b341612c719f891a ]

Since the beginning the second clock ('special', 'sclk') was optional and
it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with
v7 of MFC hardware).

However commit 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling")
made handling of all specified clocks mandatory. This patch restores
original behavior of the driver and fixes its operation on
Exynos5420 SoCs.

Fixes: 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 2e62f8721fa5..7d52431c2c83 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -34,6 +34,11 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
 	for (i = 0; i < pm->num_clocks; i++) {
 		pm->clocks[i] = devm_clk_get(pm->device, pm->clk_names[i]);
 		if (IS_ERR(pm->clocks[i])) {
+			/* additional clocks are optional */
+			if (i && PTR_ERR(pm->clocks[i]) == -ENOENT) {
+				pm->clocks[i] = NULL;
+				continue;
+			}
 			mfc_err("Failed to get clock: %s\n",
 				pm->clk_names[i]);
 			return PTR_ERR(pm->clocks[i]);
-- 
2.20.1

[PATCH AUTOSEL 5.2 144/249] media: s5p-mfc: Make additional clocks optional

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit e08efef8fe7db87206314c19b341612c719f891a ]

Since the beginning the second clock ('special', 'sclk') was optional and
it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with
v7 of MFC hardware).

However commit 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling")
made handling of all specified clocks mandatory. This patch restores
original behavior of the driver and fixes its operation on
Exynos5420 SoCs.

Fixes: 1bce6fb3edf1 ("[media] s5p-mfc: Rework clock handling")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 2e62f8721fa5..7d52431c2c83 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -34,6 +34,11 @@ int s5p_mfc_init_pm(struct s5p_mfc_dev *dev)
 	for (i = 0; i < pm->num_clocks; i++) {
 		pm->clocks[i] = devm_clk_get(pm->device, pm->clk_names[i]);
 		if (IS_ERR(pm->clocks[i])) {
+			/* additional clocks are optional */
+			if (i && PTR_ERR(pm->clocks[i]) == -ENOENT) {
+				pm->clocks[i] = NULL;
+				continue;
+			}
 			mfc_err("Failed to get clock: %s\n",
 				pm->clk_names[i]);
 			return PTR_ERR(pm->clocks[i]);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.2 145/249] media: i2c: fix warning same module names

[Sasha Levin]

From: Anders Roxell <anders.roxell@linaro.org>

[ Upstream commit b2ce5617dad254230551feda3599f2cc68e53ad8 ]

When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511
enabled as loadable modules, we see the following warning:

  drivers/gpu/drm/bridge/adv7511/adv7511.ko
  drivers/media/i2c/adv7511.ko

Rework so that the file is named adv7511-v4l2.c.

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/Makefile                      | 2 +-
 drivers/media/i2c/{adv7511.c => adv7511-v4l2.c} | 5 +++++
 2 files changed, 6 insertions(+), 1 deletion(-)
 rename drivers/media/i2c/{adv7511.c => adv7511-v4l2.c} (99%)

diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index d8ad9dad495d..fd4ea86dedd5 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_VIDEO_ADV748X) += adv748x/
 obj-$(CONFIG_VIDEO_ADV7604) += adv7604.o
 obj-$(CONFIG_VIDEO_ADV7842) += adv7842.o
 obj-$(CONFIG_VIDEO_AD9389B) += ad9389b.o
-obj-$(CONFIG_VIDEO_ADV7511) += adv7511.o
+obj-$(CONFIG_VIDEO_ADV7511) += adv7511-v4l2.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_VS6624)  += vs6624.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511-v4l2.c
similarity index 99%
rename from drivers/media/i2c/adv7511.c
rename to drivers/media/i2c/adv7511-v4l2.c
index cec5ebb1c9e6..2ad6bdf1a9fc 100644
--- a/drivers/media/i2c/adv7511.c
+++ b/drivers/media/i2c/adv7511-v4l2.c
@@ -5,6 +5,11 @@
  * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
  */
 
+/*
+ * This file is named adv7511-v4l2.c so it doesn't conflict with the Analog
+ * Device ADV7511 (config fragment CONFIG_DRM_I2C_ADV7511).
+ */
+
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-- 
2.20.1

[PATCH AUTOSEL 5.2 146/249] ntp: Limit TAI-UTC offset

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit d897a4ab11dc8a9fda50d2eccc081a96a6385998 ]

Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.

This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.

Reported-by: Weikang shi <swkhack@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/ntp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 8de4f789dc1b..65eb796610dc 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -43,6 +43,7 @@ static u64			tick_length_base;
 #define MAX_TICKADJ		500LL		/* usecs */
 #define MAX_TICKADJ_SCALED \
 	(((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ)
+#define MAX_TAI_OFFSET		100000
 
 /*
  * phase-lock loop variables
@@ -691,7 +692,8 @@ static inline void process_adjtimex_modes(const struct __kernel_timex *txc,
 		time_constant = max(time_constant, 0l);
 	}
 
-	if (txc->modes & ADJ_TAI && txc->constant >= 0)
+	if (txc->modes & ADJ_TAI &&
+			txc->constant >= 0 && txc->constant <= MAX_TAI_OFFSET)
 		*time_tai = txc->constant;
 
 	if (txc->modes & ADJ_OFFSET)
-- 
2.20.1

[PATCH AUTOSEL 5.2 147/249] timer_list: Guard procfs specific code

[Sasha Levin]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit a9314773a91a1d3b36270085246a6715a326ff00 ]

With CONFIG_PROC_FS=n the following warning is emitted:

kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
   static const struct seq_operations timer_list_sops = {

Add #ifdef guard around procfs specific code.

Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/timer_list.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index 98ba50dcb1b2..acb326f5f50a 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -282,23 +282,6 @@ static inline void timer_list_header(struct seq_file *m, u64 now)
 	SEQ_printf(m, "\n");
 }
 
-static int timer_list_show(struct seq_file *m, void *v)
-{
-	struct timer_list_iter *iter = v;
-
-	if (iter->cpu == -1 && !iter->second_pass)
-		timer_list_header(m, iter->now);
-	else if (!iter->second_pass)
-		print_cpu(m, iter->cpu, iter->now);
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
-	else if (iter->cpu == -1 && iter->second_pass)
-		timer_list_show_tickdevices_header(m);
-	else
-		print_tickdevice(m, tick_get_device(iter->cpu), iter->cpu);
-#endif
-	return 0;
-}
-
 void sysrq_timer_list_show(void)
 {
 	u64 now = ktime_to_ns(ktime_get());
@@ -317,6 +300,24 @@ void sysrq_timer_list_show(void)
 	return;
 }
 
+#ifdef CONFIG_PROC_FS
+static int timer_list_show(struct seq_file *m, void *v)
+{
+	struct timer_list_iter *iter = v;
+
+	if (iter->cpu == -1 && !iter->second_pass)
+		timer_list_header(m, iter->now);
+	else if (!iter->second_pass)
+		print_cpu(m, iter->cpu, iter->now);
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+	else if (iter->cpu == -1 && iter->second_pass)
+		timer_list_show_tickdevices_header(m);
+	else
+		print_tickdevice(m, tick_get_device(iter->cpu), iter->cpu);
+#endif
+	return 0;
+}
+
 static void *move_iter(struct timer_list_iter *iter, loff_t offset)
 {
 	for (; offset; offset--) {
@@ -376,3 +377,4 @@ static int __init init_timer_list_procfs(void)
 	return 0;
 }
 __initcall(init_timer_list_procfs);
+#endif
-- 
2.20.1

[PATCH AUTOSEL 5.2 148/249] media: mt9m111: fix fw-node refactoring

[Sasha Levin]

From: Robert Jarzmik <robert.jarzmik@free.fr>

[ Upstream commit 8d4e29a51a954b43e06d916772fa4f50b7e5bbd6 ]

In the patch refactoring the fw-node, the mt9m111 was broken for all
platform_data based platforms, which were the first aim of this
driver. Only the devicetree platform are still functional, probably
because the testing was done on these.

The result is that -EINVAL is systematically return for such platforms,
what this patch fixes.

[Sakari Ailus: Rework this to resolve a merge conflict and use dev_fwnode]

Fixes: 98480d65c48c ("media: mt9m111: allow to setup pixclk polarity")
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/mt9m111.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index 362c3b93636e..5a642b5ad076 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -1245,9 +1245,11 @@ static int mt9m111_probe(struct i2c_client *client,
 	if (!mt9m111)
 		return -ENOMEM;
 
-	ret = mt9m111_probe_fw(client, mt9m111);
-	if (ret)
-		return ret;
+	if (dev_fwnode(&client->dev)) {
+		ret = mt9m111_probe_fw(client, mt9m111);
+		if (ret)
+			return ret;
+	}
 
 	mt9m111->clk = v4l2_clk_get(&client->dev, "mclk");
 	if (IS_ERR(mt9m111->clk))
-- 
2.20.1

[PATCH AUTOSEL 5.2 149/249] ASoC: soc-core: call snd_soc_unbind_card() under mutex_lock;

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit b545542a0b866f7975254e41c595836e9bc0ff2f ]

commit 34ac3c3eb8f0c07 ("ASoC: core: lock client_mutex while removing
link components") added mutex_lock() at soc_remove_link_components().

Is is called from snd_soc_unbind_card()

	snd_soc_unbind_card()
=>		soc_remove_link_components()
		soc_cleanup_card_resources()
			soc_remove_dai_links()
=>				soc_remove_link_components()

And, there are 2 way to call it.

(1)
	snd_soc_unregister_component()
**		mutex_lock()
			snd_soc_component_del_unlocked()
=>				snd_soc_unbind_card()
**		mutex_unlock()

(2)
	snd_soc_unregister_card()
=>		snd_soc_unbind_card()

(1) case is already using mutex_lock() when it calles
snd_soc_unbind_card(), thus, we will get lockdep warning.

commit 495f926c68ddb90 ("ASoC: core: Fix deadlock in
snd_soc_instantiate_card()") tried to fixup it, but still not
enough. We still have lockdep warning when we try unbind/bind.

We need mutex_lock() under snd_soc_unregister_card()
instead of snd_remove_link_components()/snd_soc_unbind_card().

Fixes: 34ac3c3eb8f0c07 ("ASoC: core: lock client_mutex while removing link components")
Fixes: 495f926c68ddb90 ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 41c0cfaf2db5..9138fcb15cd3 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2837,14 +2837,12 @@ static void snd_soc_unbind_card(struct snd_soc_card *card, bool unregister)
 		snd_soc_dapm_shutdown(card);
 		snd_soc_flush_all_delayed_work(card);
 
-		mutex_lock(&client_mutex);
 		/* remove all components used by DAI links on this card */
 		for_each_comp_order(order) {
 			for_each_card_rtds(card, rtd) {
 				soc_remove_link_components(card, rtd, order);
 			}
 		}
-		mutex_unlock(&client_mutex);
 
 		soc_cleanup_card_resources(card);
 		if (!unregister)
@@ -2863,7 +2861,9 @@ static void snd_soc_unbind_card(struct snd_soc_card *card, bool unregister)
  */
 int snd_soc_unregister_card(struct snd_soc_card *card)
 {
+	mutex_lock(&client_mutex);
 	snd_soc_unbind_card(card, true);
+	mutex_unlock(&client_mutex);
 	dev_dbg(card->dev, "ASoC: Unregistered card '%s'\n", card->name);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 150/249] acpi/arm64: ignore 5.1 FADTs that are reported as 5.0

[Sasha Levin]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

[ Upstream commit 2af22f3ec3ca452f1e79b967f634708ff01ced8a ]

Some Qualcomm Snapdragon based laptops built to run Microsoft Windows
are clearly ACPI 5.1 based, given that that is the first ACPI revision
that supports ARM, and introduced the FADT 'arm_boot_flags' field,
which has a non-zero field on those systems.

So in these cases, infer from the ARM boot flags that the FADT must be
5.1 or later, and treat it as 5.1.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/acpi.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 2804330c95dc..3a58e9db5cfe 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -152,10 +152,14 @@ static int __init acpi_fadt_sanity_check(void)
 	 */
 	if (table->revision < 5 ||
 	   (table->revision == 5 && fadt->minor_revision < 1)) {
-		pr_err("Unsupported FADT revision %d.%d, should be 5.1+\n",
+		pr_err(FW_BUG "Unsupported FADT revision %d.%d, should be 5.1+\n",
 		       table->revision, fadt->minor_revision);
-		ret = -EINVAL;
-		goto out;
+
+		if (!fadt->arm_boot_flags) {
+			ret = -EINVAL;
+			goto out;
+		}
+		pr_err("FADT has ARM boot flags set, assuming 5.1\n");
 	}
 
 	if (!(fadt->flags & ACPI_FADT_HW_REDUCED)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 151/249] media: coda: fix mpeg2 sequence number handling

[Sasha Levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit 56d159a4ec6d8da7313aac6fcbb95d8fffe689ba ]

Sequence number handling assumed that the BIT processor frame number
starts counting at 1, but this is not true for the MPEG-2 decoder,
which starts at 0. Fix the sequence counter offset detection to handle
this.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/coda-bit.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index 976f6aa69f41..1eeed34f300d 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -1739,6 +1739,7 @@ static int __coda_start_decoding(struct coda_ctx *ctx)
 		v4l2_err(&dev->v4l2_dev, "CODA_COMMAND_SEQ_INIT timeout\n");
 		return ret;
 	}
+	ctx->sequence_offset = ~0U;
 	ctx->initialized = 1;
 
 	/* Update kfifo out pointer from coda bitstream read pointer */
@@ -2151,7 +2152,9 @@ static void coda_finish_decode(struct coda_ctx *ctx)
 		v4l2_err(&dev->v4l2_dev,
 			 "decoded frame index out of range: %d\n", decoded_idx);
 	} else {
-		val = coda_read(dev, CODA_RET_DEC_PIC_FRAME_NUM) - 1;
+		val = coda_read(dev, CODA_RET_DEC_PIC_FRAME_NUM);
+		if (ctx->sequence_offset == -1)
+			ctx->sequence_offset = val;
 		val -= ctx->sequence_offset;
 		spin_lock(&ctx->buffer_meta_lock);
 		if (!list_empty(&ctx->buffer_meta_list)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 152/249] media: coda: fix last buffer handling in V4L2_ENC_CMD_STOP

[Sasha Levin]

From: Marco Felsch <m.felsch@pengutronix.de>

[ Upstream commit f3775f89852d167990b0d718587774cf00d22ac2 ]

coda_encoder_cmd() is racy, as the last scheduled picture run worker can
still be in-flight while the ENC_CMD_STOP command is issued. Depending
on the exact timing the sequence numbers might already be changed, but
the last buffer might not have been put on the destination queue yet.

In this case the current implementation would prematurely wake the
destination queue with last_buffer_dequeued=true, causing userspace to
call streamoff before the last buffer is handled.

Close this race window by synchronizing with the pic_run_worker before
doing the sequence check.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[l.stach@pengutronix.de: switch to flush_work, reword commit message]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/coda-common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c
index 6238047273f2..68a585d3af91 100644
--- a/drivers/media/platform/coda/coda-common.c
+++ b/drivers/media/platform/coda/coda-common.c
@@ -1024,6 +1024,8 @@ static int coda_encoder_cmd(struct file *file, void *fh,
 	/* Set the stream-end flag on this context */
 	ctx->bit_stream_param |= CODA_BIT_STREAM_END_FLAG;
 
+	flush_work(&ctx->pic_run_work);
+
 	/* If there is no buffer in flight, wake up */
 	if (!ctx->streamon_out || ctx->qsequence == ctx->osequence) {
 		dst_vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
-- 
2.20.1

[PATCH AUTOSEL 5.2 153/249] media: coda: increment sequence offset for the last returned frame

[Sasha Levin]

From: Philipp Zabel <p.zabel@pengutronix.de>

[ Upstream commit b3b7d96817cdb8b6fc353867705275dce8f41ccc ]

If no more frames are decoded in bitstream end mode, and a previously
decoded frame has been returned, the firmware still increments the frame
number. To avoid a sequence number mismatch after decoder restart,
increment the sequence_offset correction parameter.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/coda/coda-bit.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/coda/coda-bit.c b/drivers/media/platform/coda/coda-bit.c
index 1eeed34f300d..8c9743e067cf 100644
--- a/drivers/media/platform/coda/coda-bit.c
+++ b/drivers/media/platform/coda/coda-bit.c
@@ -2147,6 +2147,9 @@ static void coda_finish_decode(struct coda_ctx *ctx)
 		else if (ctx->display_idx < 0)
 			ctx->hold = true;
 	} else if (decoded_idx == -2) {
+		if (ctx->display_idx >= 0 &&
+		    ctx->display_idx < ctx->num_internal_frames)
+			ctx->sequence_offset++;
 		/* no frame was decoded, we still return remaining buffers */
 	} else if (decoded_idx < 0 || decoded_idx >= ctx->num_internal_frames) {
 		v4l2_err(&dev->v4l2_dev,
-- 
2.20.1

[PATCH AUTOSEL 5.2 154/249] media: vimc: cap: check v4l2_fill_pixfmt return value

[Sasha Levin]

From: André Almeida <andrealmeid@collabora.com>

[ Upstream commit 77ae46e11df5c96bb4582633851f838f5d954df4 ]

v4l2_fill_pixfmt() returns -EINVAL if the pixelformat used as parameter is
invalid or if the user is trying to use a multiplanar format with the
singleplanar API. Currently, the vimc_cap_try_fmt_vid_cap() returns such
value, but vimc_cap_s_fmt_vid_cap() is ignoring it. Fix that and returns
an error value if vimc_cap_try_fmt_vid_cap() has failed.

Signed-off-by: André Almeida <andrealmeid@collabora.com>
Suggested-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vimc/vimc-capture.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/vimc/vimc-capture.c b/drivers/media/platform/vimc/vimc-capture.c
index 946dc0908566..664855708fdf 100644
--- a/drivers/media/platform/vimc/vimc-capture.c
+++ b/drivers/media/platform/vimc/vimc-capture.c
@@ -142,12 +142,15 @@ static int vimc_cap_s_fmt_vid_cap(struct file *file, void *priv,
 				  struct v4l2_format *f)
 {
 	struct vimc_cap_device *vcap = video_drvdata(file);
+	int ret;
 
 	/* Do not change the format while stream is on */
 	if (vb2_is_busy(&vcap->queue))
 		return -EBUSY;
 
-	vimc_cap_try_fmt_vid_cap(file, priv, f);
+	ret = vimc_cap_try_fmt_vid_cap(file, priv, f);
+	if (ret)
+		return ret;
 
 	dev_dbg(vcap->dev, "%s: format update: "
 		"old:%dx%d (0x%x, %d, %d, %d, %d) "
-- 
2.20.1

[PATCH AUTOSEL 5.2 155/249] media: hdpvr: fix locking and a missing msleep

[Sasha Levin]

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit 6bc5a4a1927556ff9adce1aa95ea408c95453225 ]

This driver has three locking issues:

- The wait_event_interruptible() condition calls hdpvr_get_next_buffer(dev)
  which uses a mutex, which is not allowed. Rewrite with list_empty_careful()
  that doesn't need locking.

- In hdpvr_read() the call to hdpvr_stop_streaming() didn't lock io_mutex,
  but it should have since stop_streaming expects that.

- In hdpvr_device_release() io_mutex was locked when calling flush_work(),
  but there it shouldn't take that mutex since the work done by flush_work()
  also wants to lock that mutex.

There are also two other changes (suggested by Keith):

- msecs_to_jiffies(4000); (a NOP) should have been msleep(4000).
- Change v4l2_dbg to v4l2_info to always log if streaming had to be restarted.

Reported-by: Keith Pyle <kpyle@austin.rr.com>
Suggested-by: Keith Pyle <kpyle@austin.rr.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/hdpvr/hdpvr-video.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c
index 7580fc5f2f12..6a6405b80797 100644
--- a/drivers/media/usb/hdpvr/hdpvr-video.c
+++ b/drivers/media/usb/hdpvr/hdpvr-video.c
@@ -435,7 +435,7 @@ static ssize_t hdpvr_read(struct file *file, char __user *buffer, size_t count,
 	/* wait for the first buffer */
 	if (!(file->f_flags & O_NONBLOCK)) {
 		if (wait_event_interruptible(dev->wait_data,
-					     hdpvr_get_next_buffer(dev)))
+					     !list_empty_careful(&dev->rec_buff_list)))
 			return -ERESTARTSYS;
 	}
 
@@ -461,10 +461,17 @@ static ssize_t hdpvr_read(struct file *file, char __user *buffer, size_t count,
 				goto err;
 			}
 			if (!err) {
-				v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
-					"timeout: restart streaming\n");
+				v4l2_info(&dev->v4l2_dev,
+					  "timeout: restart streaming\n");
+				mutex_lock(&dev->io_mutex);
 				hdpvr_stop_streaming(dev);
-				msecs_to_jiffies(4000);
+				mutex_unlock(&dev->io_mutex);
+				/*
+				 * The FW needs about 4 seconds after streaming
+				 * stopped before it is ready to restart
+				 * streaming.
+				 */
+				msleep(4000);
 				err = hdpvr_start_streaming(dev);
 				if (err) {
 					ret = err;
@@ -1127,9 +1134,7 @@ static void hdpvr_device_release(struct video_device *vdev)
 	struct hdpvr_device *dev = video_get_drvdata(vdev);
 
 	hdpvr_delete(dev);
-	mutex_lock(&dev->io_mutex);
 	flush_work(&dev->worker);
-	mutex_unlock(&dev->io_mutex);
 
 	v4l2_device_unregister(&dev->v4l2_dev);
 	v4l2_ctrl_handler_free(&dev->hdl);
-- 
2.20.1

[PATCH AUTOSEL 5.2 156/249] net: stmmac: sun8i: force select external PHY when no internal one

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit 0fec7e72ae1391bb2d7527efb54fe6ae88acabce ]

The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.

This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).

Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a69c34f605b1..98a15ba8be9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -884,6 +884,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		 * address. No need to mask it again.
 		 */
 		reg |= 1 << H3_EPHY_ADDR_SHIFT;
+	} else {
+		/* For SoCs without internal PHY the PHY selection bit should be
+		 * set to 0 (external PHY).
+		 */
+		reg &= ~H3_EPHY_SELECT;
 	}
 
 	if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 157/249] rtlwifi: rtl8192cu: fix error handle when usb probe failed

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 6c0ed66f1a5b84e2a812c7c2d6571a5621bf3396 ]

rtl_usb_probe() must do error handle rtl_deinit_core() only if
rtl_init_core() is done, otherwise goto error_out2.

| usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
| rtl_usb: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl8192cu: Chip version 0x10
| rtl_usb: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffb9 value=0x0
| rtl_usb: Too few input end points found
| INFO: trying to register non-static key.
| the code is fine but needs lockdep annotation.
| turning off the locking correctness validator.
| CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
| Google 01/01/2011
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|   __dump_stack lib/dump_stack.c:77 [inline]
|   dump_stack+0xe8/0x16e lib/dump_stack.c:113
|   assign_lock_key kernel/locking/lockdep.c:786 [inline]
|   register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095
|   __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582
|   lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211
|   __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
|   _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152
|   rtl_c2hcmd_launcher+0xd1/0x390
| drivers/net/wireless/realtek/rtlwifi/base.c:2344
|   rtl_deinit_core+0x25/0x2d0 drivers/net/wireless/realtek/rtlwifi/base.c:574
|   rtl_usb_probe.cold+0x861/0xa70
| drivers/net/wireless/realtek/rtlwifi/usb.c:1093
|   usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021
|   generic_probe+0xa2/0xda drivers/usb/core/generic.c:210
|   usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266
|   really_probe+0x2da/0xb10 drivers/base/dd.c:509
|   driver_probe_device+0x21d/0x350 drivers/base/dd.c:671
|   __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778
|   bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454
|   __device_attach+0x223/0x3a0 drivers/base/dd.c:844
|   bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514
|   device_add+0xad2/0x16e0 drivers/base/core.c:2106
|   usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534
|   hub_port_connect drivers/usb/core/hub.c:5089 [inline]
|   hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
|   port_event drivers/usb/core/hub.c:5350 [inline]
|   hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432
|   process_one_work+0x90f/0x1580 kernel/workqueue.c:2269
|   worker_thread+0x9b/0xe20 kernel/workqueue.c:2415
|   kthread+0x313/0x420 kernel/kthread.c:253
|   ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Reported-by: syzbot+1fcc5ef45175fc774231@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index e24fda5e9087..34d68dbf4b4c 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1064,13 +1064,13 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->cfg->ops->read_eeprom_info(hw);
 	err = _rtl_usb_init(hw);
 	if (err)
-		goto error_out;
+		goto error_out2;
 	rtl_usb_init_sw(hw);
 	/* Init mac80211 sw */
 	err = rtl_init_core(hw);
 	if (err) {
 		pr_err("Can't allocate sw for mac80211\n");
-		goto error_out;
+		goto error_out2;
 	}
 	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
 		pr_err("Can't init_sw_vars\n");
@@ -1091,6 +1091,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 
 error_out:
 	rtl_deinit_core(hw);
+error_out2:
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
-- 
2.20.1

[PATCH AUTOSEL 5.2 158/249] mt7601u: do not schedule rx_tasklet when the device has been disconnected

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ]

Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.

[   24.921354] usb 3-14: USB disconnect, device number 7
[   24.921593] ------------[ cut here ]------------
[   24.921594] RX urb mismatch
[   24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G           OE     4.19.31-041931-generic #201903231635
[   24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[   24.921782] Workqueue: usb_hub_wq hub_event
[   24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[   24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[   24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[   24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[   24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[   24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[   24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[   24.921807] FS:  0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[   24.921808] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[   24.921809] Call Trace:
[   24.921812]  <IRQ>
[   24.921819]  __usb_hcd_giveback_urb+0x8b/0x140
[   24.921821]  usb_hcd_giveback_urb+0xca/0xe0
[   24.921828]  xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[   24.921834]  handle_cmd_completion+0xe02/0x10d0
[   24.921837]  xhci_irq+0x274/0x4a0
[   24.921838]  xhci_msi_irq+0x11/0x20
[   24.921851]  __handle_irq_event_percpu+0x44/0x190
[   24.921856]  handle_irq_event_percpu+0x32/0x80
[   24.921861]  handle_irq_event+0x3b/0x5a
[   24.921867]  handle_edge_irq+0x80/0x190
[   24.921874]  handle_irq+0x20/0x30
[   24.921889]  do_IRQ+0x4e/0xe0
[   24.921891]  common_interrupt+0xf/0xf
[   24.921892]  </IRQ>
[   24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[   24.921354] usb 3-14: USB disconnect, device number 7

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/dma.c | 33 +++++++++++----------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 66d60283e456..0faa3db6fde4 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -185,10 +185,23 @@ static void mt7601u_complete_rx(struct urb *urb)
 	struct mt7601u_rx_queue *q = &dev->rx_q;
 	unsigned long flags;
 
-	spin_lock_irqsave(&dev->rx_lock, flags);
+	/* do no schedule rx tasklet if urb has been unlinked
+	 * or the device has been removed
+	 */
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+	case -ENOENT:
+		return;
+	default:
+		dev_err_ratelimited(dev->dev, "rx urb failed: %d\n",
+				    urb->status);
+		/* fall through */
+	case 0:
+		break;
+	}
 
-	if (mt7601u_urb_has_error(urb))
-		dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status);
+	spin_lock_irqsave(&dev->rx_lock, flags);
 	if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
 		goto out;
 
@@ -355,19 +368,9 @@ int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb,
 static void mt7601u_kill_rx(struct mt7601u_dev *dev)
 {
 	int i;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev->rx_lock, flags);
-
-	for (i = 0; i < dev->rx_q.entries; i++) {
-		int next = dev->rx_q.end;
-
-		spin_unlock_irqrestore(&dev->rx_lock, flags);
-		usb_poison_urb(dev->rx_q.e[next].urb);
-		spin_lock_irqsave(&dev->rx_lock, flags);
-	}
-
-	spin_unlock_irqrestore(&dev->rx_lock, flags);
+	for (i = 0; i < dev->rx_q.entries; i++)
+		usb_poison_urb(dev->rx_q.e[i].urb);
 }
 
 static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev,
-- 
2.20.1

[PATCH AUTOSEL 5.2 159/249] x86/build: Add 'set -e' to mkcapflags.sh to delete broken capflags.c

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit bc53d3d777f81385c1bb08b07bd1c06450ecc2c1 ]

Without 'set -e', shell scripts continue running even after any
error occurs. The missed 'set -e' is a typical bug in shell scripting.

For example, when a disk space shortage occurs while this script is
running, it actually ends up with generating a truncated capflags.c.

Yet, mkcapflags.sh continues running and exits with 0. So, the build
system assumes it has succeeded.

It will not be re-generated in the next invocation of Make since its
timestamp is newer than that of any of the source files.

Add 'set -e' so that any error in this script is caught and propagated
to the build system.

Since 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"),
make automatically deletes the target on any failure. So, the broken
capflags.c will be deleted automatically.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20190625072622.17679-1-yamada.masahiro@socionext.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mkcapflags.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/x86/kernel/cpu/mkcapflags.sh b/arch/x86/kernel/cpu/mkcapflags.sh
index d0dfb892c72f..aed45b8895d5 100644
--- a/arch/x86/kernel/cpu/mkcapflags.sh
+++ b/arch/x86/kernel/cpu/mkcapflags.sh
@@ -4,6 +4,8 @@
 # Generate the x86_cap/bug_flags[] arrays from include/asm/cpufeatures.h
 #
 
+set -e
+
 IN=$1
 OUT=$2
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 160/249] mt7601u: fix possible memory leak when the device is disconnected

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 23377c200b2eb48a60d0f228b2a2e75ed6ee6060 ]

When the device is disconnected while passing traffic it is possible
to receive out of order urbs causing a memory leak since the skb linked
to the current tx urb is not removed. Fix the issue deallocating the skb
cleaning up the tx ring. Moreover this patch fixes the following kernel
warning

[   57.480771] usb 1-1: USB disconnect, device number 2
[   57.483451] ------------[ cut here ]------------
[   57.483462] TX urb mismatch
[   57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00
[   57.483483] Modules linked in:
[   57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72
[   57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014
[   57.483502] Workqueue: usb_hub_wq hub_event
[   57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0
[   57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f
[   57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092
[   57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c
[   57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371
[   57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001
[   57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046
[   57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078
[   57.483548] FS:  0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000
[   57.483550] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0
[   57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   57.483559] Call Trace:
[   57.483561]  <IRQ>
[   57.483565]  __usb_hcd_giveback_urb+0x77/0xe0
[   57.483570]  xhci_giveback_urb_in_irq.isra.0+0x8b/0x140
[   57.483574]  handle_cmd_completion+0xf5b/0x12c0
[   57.483577]  xhci_irq+0x1f6/0x1810
[   57.483581]  ? lockdep_hardirqs_on+0x9e/0x180
[   57.483584]  ? _raw_spin_unlock_irq+0x24/0x30
[   57.483588]  __handle_irq_event_percpu+0x3a/0x260
[   57.483592]  handle_irq_event_percpu+0x1c/0x60
[   57.483595]  handle_irq_event+0x2f/0x4c
[   57.483599]  handle_edge_irq+0x7e/0x1a0
[   57.483603]  handle_irq+0x17/0x20
[   57.483607]  do_IRQ+0x54/0x110
[   57.483610]  common_interrupt+0xf/0xf
[   57.483612]  </IRQ>

Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt7601u/dma.c | 21 ++++++++++++++++-----
 drivers/net/wireless/mediatek/mt7601u/tx.c  |  4 ++--
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index 0faa3db6fde4..f6a0454abe04 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -233,14 +233,25 @@ static void mt7601u_complete_tx(struct urb *urb)
 	struct sk_buff *skb;
 	unsigned long flags;
 
-	spin_lock_irqsave(&dev->tx_lock, flags);
+	switch (urb->status) {
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+	case -ENOENT:
+		return;
+	default:
+		dev_err_ratelimited(dev->dev, "tx urb failed: %d\n",
+				    urb->status);
+		/* fall through */
+	case 0:
+		break;
+	}
 
-	if (mt7601u_urb_has_error(urb))
-		dev_err(dev->dev, "Error: TX urb failed:%d\n", urb->status);
+	spin_lock_irqsave(&dev->tx_lock, flags);
 	if (WARN_ONCE(q->e[q->start].urb != urb, "TX urb mismatch"))
 		goto out;
 
 	skb = q->e[q->start].skb;
+	q->e[q->start].skb = NULL;
 	trace_mt_tx_dma_done(dev, skb);
 
 	__skb_queue_tail(&dev->tx_skb_done, skb);
@@ -440,10 +451,10 @@ static void mt7601u_free_tx_queue(struct mt7601u_tx_queue *q)
 {
 	int i;
 
-	WARN_ON(q->used);
-
 	for (i = 0; i < q->entries; i++)  {
 		usb_poison_urb(q->e[i].urb);
+		if (q->e[i].skb)
+			mt7601u_tx_status(q->dev, q->e[i].skb);
 		usb_free_urb(q->e[i].urb);
 	}
 }
diff --git a/drivers/net/wireless/mediatek/mt7601u/tx.c b/drivers/net/wireless/mediatek/mt7601u/tx.c
index 906e19c5f628..f3dff8319a4c 100644
--- a/drivers/net/wireless/mediatek/mt7601u/tx.c
+++ b/drivers/net/wireless/mediatek/mt7601u/tx.c
@@ -109,9 +109,9 @@ void mt7601u_tx_status(struct mt7601u_dev *dev, struct sk_buff *skb)
 	info->status.rates[0].idx = -1;
 	info->flags |= IEEE80211_TX_STAT_ACK;
 
-	spin_lock(&dev->mac_lock);
+	spin_lock_bh(&dev->mac_lock);
 	ieee80211_tx_status(dev->hw, skb);
-	spin_unlock(&dev->mac_lock);
+	spin_unlock_bh(&dev->mac_lock);
 }
 
 static int mt7601u_skb_rooms(struct mt7601u_dev *dev, struct sk_buff *skb)
-- 
2.20.1

[PATCH AUTOSEL 5.2 161/249] ipvs: fix tinfo memory leak in start_sync_thread

[Sasha Levin]

From: Julian Anastasov <ja@ssi.bg>

[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]

syzkaller reports for memory leak in start_sync_thread [1]

As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.

Fix this by releasing tinfo in the controlling code instead.

[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
 comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
 hex dump (first 32 bytes):
   00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff  .@|......E.!....
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 backtrace:
   [<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
   [<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
   [<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
   [<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
   [<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
   [<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
   [<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
   [<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
   [<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
   [<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
   [<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
   [<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
   [<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
   [<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
   [<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
   [<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
   [<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
   [<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
   [<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ip_vs.h             |   6 +-
 net/netfilter/ipvs/ip_vs_ctl.c  |   4 -
 net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
 3 files changed, 76 insertions(+), 68 deletions(-)

diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 2ac40135b576..b36a1df93e7c 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -808,11 +808,12 @@ struct ipvs_master_sync_state {
 	struct ip_vs_sync_buff	*sync_buff;
 	unsigned long		sync_queue_len;
 	unsigned int		sync_queue_delay;
-	struct task_struct	*master_thread;
 	struct delayed_work	master_wakeup_work;
 	struct netns_ipvs	*ipvs;
 };
 
+struct ip_vs_sync_thread_data;
+
 /* How much time to keep dests in trash */
 #define IP_VS_DEST_TRASH_PERIOD		(120 * HZ)
 
@@ -943,7 +944,8 @@ struct netns_ipvs {
 	spinlock_t		sync_lock;
 	struct ipvs_master_sync_state *ms;
 	spinlock_t		sync_buff_lock;
-	struct task_struct	**backup_threads;
+	struct ip_vs_sync_thread_data *master_tinfo;
+	struct ip_vs_sync_thread_data *backup_tinfo;
 	int			threads_mask;
 	volatile int		sync_state;
 	struct mutex		sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 776c87ed4813..741d91aa4a8d 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2396,9 +2396,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 			cfg.syncid = dm->syncid;
 			ret = start_sync_thread(ipvs, &cfg, dm->state);
 		} else {
-			mutex_lock(&ipvs->sync_mutex);
 			ret = stop_sync_thread(ipvs, dm->state);
-			mutex_unlock(&ipvs->sync_mutex);
 		}
 		goto out_dec;
 	}
@@ -3515,10 +3513,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
 	if (!attrs[IPVS_DAEMON_ATTR_STATE])
 		return -EINVAL;
 
-	mutex_lock(&ipvs->sync_mutex);
 	ret = stop_sync_thread(ipvs,
 			       nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
-	mutex_unlock(&ipvs->sync_mutex);
 	return ret;
 }
 
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 2526be6b3d90..a4a78c4b06de 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
 #define IPVS_OPT_F_PARAM	(1 << (IPVS_OPT_PARAM-1))
 
 struct ip_vs_sync_thread_data {
+	struct task_struct *task;
 	struct netns_ipvs *ipvs;
 	struct socket *sock;
 	char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
 					      max(IPVS_SYNC_SEND_DELAY, 1));
 		ms->sync_queue_len++;
 		list_add_tail(&sb->list, &ms->sync_queue);
-		if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
-			wake_up_process(ms->master_thread);
+		if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+			int id = (int)(ms - ipvs->ms);
+
+			wake_up_process(ipvs->master_tinfo[id].task);
+		}
 	} else
 		ip_vs_sync_buff_release(sb);
 	spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
 	spin_lock_bh(&ipvs->sync_lock);
 	if (ms->sync_queue_len &&
 	    ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+		int id = (int)(ms - ipvs->ms);
+
 		ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
-		wake_up_process(ms->master_thread);
+		wake_up_process(ipvs->master_tinfo[id].task);
 	}
 	spin_unlock_bh(&ipvs->sync_lock);
 }
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
 	if (sb)
 		ip_vs_sync_buff_release(sb);
 
-	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
-	kfree(tinfo);
-
 	return 0;
 }
 
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
 		}
 	}
 
-	/* release the sending multicast socket */
-	sock_release(tinfo->sock);
-	kfree(tinfo->buf);
-	kfree(tinfo);
-
 	return 0;
 }
 
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
 int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 		      int state)
 {
-	struct ip_vs_sync_thread_data *tinfo = NULL;
-	struct task_struct **array = NULL, *task;
+	struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+	struct task_struct *task;
 	struct net_device *dev;
 	char *name;
 	int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 		threadfn = sync_thread_master;
 	} else if (state == IP_VS_STATE_BACKUP) {
 		result = -EEXIST;
-		if (ipvs->backup_threads)
+		if (ipvs->backup_tinfo)
 			goto out_early;
 
 		ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 					  master_wakeup_work_handler);
 			ms->ipvs = ipvs;
 		}
-	} else {
-		array = kcalloc(count, sizeof(struct task_struct *),
-				GFP_KERNEL);
-		result = -ENOMEM;
-		if (!array)
-			goto out;
 	}
+	result = -ENOMEM;
+	ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+		     GFP_KERNEL);
+	if (!ti)
+		goto out;
 
 	for (id = 0; id < count; id++) {
-		result = -ENOMEM;
-		tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
-		if (!tinfo)
-			goto out;
+		tinfo = &ti[id];
 		tinfo->ipvs = ipvs;
-		tinfo->sock = NULL;
 		if (state == IP_VS_STATE_BACKUP) {
+			result = -ENOMEM;
 			tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
 					     GFP_KERNEL);
 			if (!tinfo->buf)
 				goto out;
-		} else {
-			tinfo->buf = NULL;
 		}
 		tinfo->id = id;
 		if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 			result = PTR_ERR(task);
 			goto out;
 		}
-		tinfo = NULL;
-		if (state == IP_VS_STATE_MASTER)
-			ipvs->ms[id].master_thread = task;
-		else
-			array[id] = task;
+		tinfo->task = task;
 	}
 
 	/* mark as active */
 
-	if (state == IP_VS_STATE_BACKUP)
-		ipvs->backup_threads = array;
+	if (state == IP_VS_STATE_MASTER)
+		ipvs->master_tinfo = ti;
+	else
+		ipvs->backup_tinfo = ti;
 	spin_lock_bh(&ipvs->sync_buff_lock);
 	ipvs->sync_state |= state;
 	spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 
 out:
 	/* We do not need RTNL lock anymore, release it here so that
-	 * sock_release below and in the kthreads can use rtnl_lock
-	 * to leave the mcast group.
+	 * sock_release below can use rtnl_lock to leave the mcast group.
 	 */
 	rtnl_unlock();
-	count = id;
-	while (count-- > 0) {
-		if (state == IP_VS_STATE_MASTER)
-			kthread_stop(ipvs->ms[count].master_thread);
-		else
-			kthread_stop(array[count]);
+	id = min(id, count - 1);
+	if (ti) {
+		for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+			if (tinfo->task)
+				kthread_stop(tinfo->task);
+		}
 	}
 	if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
 		kfree(ipvs->ms);
 		ipvs->ms = NULL;
 	}
 	mutex_unlock(&ipvs->sync_mutex);
-	if (tinfo) {
-		if (tinfo->sock)
-			sock_release(tinfo->sock);
-		kfree(tinfo->buf);
-		kfree(tinfo);
+
+	/* No more mutexes, release socks */
+	if (ti) {
+		for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+			if (tinfo->sock)
+				sock_release(tinfo->sock);
+			kfree(tinfo->buf);
+		}
+		kfree(ti);
 	}
-	kfree(array);
 	return result;
 
 out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
 
 int stop_sync_thread(struct netns_ipvs *ipvs, int state)
 {
-	struct task_struct **array;
+	struct ip_vs_sync_thread_data *ti, *tinfo;
 	int id;
 	int retc = -EINVAL;
 
 	IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
 
+	mutex_lock(&ipvs->sync_mutex);
 	if (state == IP_VS_STATE_MASTER) {
+		retc = -ESRCH;
 		if (!ipvs->ms)
-			return -ESRCH;
+			goto err;
+		ti = ipvs->master_tinfo;
 
 		/*
 		 * The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
 			struct ipvs_master_sync_state *ms = &ipvs->ms[id];
 			int ret;
 
+			tinfo = &ti[id];
 			pr_info("stopping master sync thread %d ...\n",
-				task_pid_nr(ms->master_thread));
+				task_pid_nr(tinfo->task));
 			cancel_delayed_work_sync(&ms->master_wakeup_work);
-			ret = kthread_stop(ms->master_thread);
+			ret = kthread_stop(tinfo->task);
 			if (retc >= 0)
 				retc = ret;
 		}
 		kfree(ipvs->ms);
 		ipvs->ms = NULL;
+		ipvs->master_tinfo = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
-		if (!ipvs->backup_threads)
-			return -ESRCH;
+		retc = -ESRCH;
+		if (!ipvs->backup_tinfo)
+			goto err;
+		ti = ipvs->backup_tinfo;
 
 		ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
-		array = ipvs->backup_threads;
 		retc = 0;
 		for (id = ipvs->threads_mask; id >= 0; id--) {
 			int ret;
 
+			tinfo = &ti[id];
 			pr_info("stopping backup sync thread %d ...\n",
-				task_pid_nr(array[id]));
-			ret = kthread_stop(array[id]);
+				task_pid_nr(tinfo->task));
+			ret = kthread_stop(tinfo->task);
 			if (retc >= 0)
 				retc = ret;
 		}
-		kfree(array);
-		ipvs->backup_threads = NULL;
+		ipvs->backup_tinfo = NULL;
+	} else {
+		goto err;
 	}
+	id = ipvs->threads_mask;
+	mutex_unlock(&ipvs->sync_mutex);
+
+	/* No more mutexes, release socks */
+	for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+		if (tinfo->sock)
+			sock_release(tinfo->sock);
+		kfree(tinfo->buf);
+	}
+	kfree(ti);
 
 	/* decrease the module use count */
 	ip_vs_use_count_dec();
+	return retc;
 
+err:
+	mutex_unlock(&ipvs->sync_mutex);
 	return retc;
 }
 
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
 {
 	int retc;
 
-	mutex_lock(&ipvs->sync_mutex);
 	retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
 	if (retc && retc != -ESRCH)
 		pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
 	retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
 	if (retc && retc != -ESRCH)
 		pr_err("Failed to stop Backup Daemon\n");
-	mutex_unlock(&ipvs->sync_mutex);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 162/249] mt76: mt7615: do not process rx packets if the device is not initialized

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 2dcb79cde6129d948a237ef7b48a73a0c82f1e01 ]

Fix following crash that occurs when the driver is processing rx packets
while the device is not initialized yet

$ rmmod mt7615e
[   67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout
$ modprobe mt7615e
[   72.406937] bus=0x1, slot = 0x0, irq=0x16
[   72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0
[   72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download
[   72.457724] Oops[#1]:
[   72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5
[   72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0
[   72.498702] task: 805769e0 task.stack: 80564000
[   72.507709] $ 0   : 00000000 00000001 00000000 00000001
[   72.518106] $ 4   : 8f704dbc 00000000 00000000 8f7046c0
[   72.528500] $ 8   : 00000024 8045e98c 81210008 11000000
[   72.538895] $12   : 8fc09f60 00000008 00000019 00000033
[   72.549289] $16   : 8f704d80 e00000ff 8f0c7800 3c182406
[   72.559684] $20   : 00000006 8ee615a0 4e000108 00000000
[   72.570078] $24   : 0000004c 8000cf94
[   72.580474] $28   : 80564000 8fc09e38 00000001 8eec41e0
[   72.590869] Hi    : 00000001
[   72.596582] Lo    : 00000000
[   72.602319] epc   : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.614953] ra    : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e]
[   72.627580] Status: 11008403 KERNEL EXL IE
[   72.635899] Cause : 40800008 (ExcCode 02)
[   72.643860] BadVA : 00000004
[   72.649573] PrId  : 0001992f (MIPS 1004Kc)
[   72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu]
[   72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000)
[   72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0
[   72.825428]         8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20
[   72.842055]         00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000
[   72.858682]         80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00
[   72.875308]         8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001
[   72.891936]         ...
[   72.896793] Call Trace:
[   72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e]
[   72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76]
[   72.936988] Code: ae020018  8ea20004  24030001 <94420004> a602002a  8ea20004  90420000  14430003  a2020034
[   72.956390]
[   72.959676] ---[ end trace f176967739edb19f ]---

Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index b8f48d10f27a..a27bc6791aa7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -96,6 +96,9 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
 	bool unicast, remove_pad, insert_ccmp_hdr = false;
 	int i, idx;
 
+	if (!test_bit(MT76_STATE_RUNNING, &dev->mt76.state))
+		return -EINVAL;
+
 	memset(status, 0, sizeof(*status));
 
 	unicast = (rxd1 & MT_RXD1_NORMAL_ADDR_TYPE) == MT_RXD1_NORMAL_U2M;
-- 
2.20.1

[PATCH AUTOSEL 5.2 163/249] ath10k: add missing error handling

[Sasha Levin]

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ]

In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.

Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28

Fixes: d96db25d2025 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index fae56c67766f..73ef3e75d199 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -602,6 +602,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 						    full_len,
 						    last_in_bundle,
 						    last_in_bundle);
+		if (ret) {
+			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
+			goto err;
+		}
 	}
 
 	ar_sdio->n_rx_pkts = i;
-- 
2.20.1

[PATCH AUTOSEL 5.2 163/249] ath10k: add missing error handling

[Sasha Levin]

From: Claire Chang <tientzu@chromium.org>

[ Upstream commit 4b553f3ca4cbde67399aa3a756c37eb92145b8a1 ]

In function ath10k_sdio_mbox_rx_alloc() [sdio.c],
ath10k_sdio_mbox_alloc_rx_pkt() is called without handling the error cases.
This will make the driver think the allocation for skb is successful and
try to access the skb. If we enable failslab, system will easily crash with
NULL pointer dereferencing.

Call trace of CONFIG_FAILSLAB:
ath10k_sdio_irq_handler+0x570/0xa88 [ath10k_sdio]
process_sdio_pending_irqs+0x4c/0x174
sdio_run_irqs+0x3c/0x64
sdio_irq_work+0x1c/0x28

Fixes: d96db25d2025 ("ath10k: add initial SDIO support")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index fae56c67766f..73ef3e75d199 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -602,6 +602,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 						    full_len,
 						    last_in_bundle,
 						    last_in_bundle);
+		if (ret) {
+			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
+			goto err;
+		}
 	}
 
 	ar_sdio->n_rx_pkts = i;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 164/249] ath10k: fix fw crash by moving chip reset after napi disabled

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ]

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2c27f407a851..6e5f7ae00253 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
 
+	ath10k_pci_irq_disable(ar);
+	ath10k_pci_irq_sync(ar);
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
+
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
 	 * memory is to reset the chip now.
@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	 */
 	ath10k_pci_safe_chip_reset(ar);
 
-	ath10k_pci_irq_disable(ar);
-	ath10k_pci_irq_sync(ar);
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
 	ath10k_pci_flush(ar);
 
 	spin_lock_irqsave(&ar_pci->ps_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 5.2 164/249] ath10k: fix fw crash by moving chip reset after napi disabled

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ]

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2c27f407a851..6e5f7ae00253 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
 
+	ath10k_pci_irq_disable(ar);
+	ath10k_pci_irq_sync(ar);
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
+
 	/* Most likely the device has HTT Rx ring configured. The only way to
 	 * prevent the device from accessing (and possible corrupting) host
 	 * memory is to reset the chip now.
@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 	 */
 	ath10k_pci_safe_chip_reset(ar);
 
-	ath10k_pci_irq_disable(ar);
-	ath10k_pci_irq_sync(ar);
-	napi_synchronize(&ar->napi);
-	napi_disable(&ar->napi);
 	ath10k_pci_flush(ar);
 
 	spin_lock_irqsave(&ar_pci->ps_lock, flags);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 165/249] ath10k: fix PCIE device wake up failed

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]

Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"

The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake

Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.

But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.

Tested HW: QCA9984

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7d7643..b242085c3c16 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -158,7 +158,7 @@ const struct ath10k_hw_values qca6174_values = {
 };
 
 const struct ath10k_hw_values qca99x0_values = {
-	.rtc_state_val_on		= 5,
+	.rtc_state_val_on		= 7,
 	.ce_count			= 12,
 	.msi_assign_ce_max		= 12,
 	.num_target_ce_config_wlan	= 10,
-- 
2.20.1

[PATCH AUTOSEL 5.2 165/249] ath10k: fix PCIE device wake up failed

[Sasha Levin]

From: Miaoqing Pan <miaoqing@codeaurora.org>

[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]

Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"

The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake

Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.

But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.

Tested HW: QCA9984

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7d7643..b242085c3c16 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -158,7 +158,7 @@ const struct ath10k_hw_values qca6174_values = {
 };
 
 const struct ath10k_hw_values qca99x0_values = {
-	.rtc_state_val_on		= 5,
+	.rtc_state_val_on		= 7,
 	.ce_count			= 12,
 	.msi_assign_ce_max		= 12,
 	.num_target_ce_config_wlan	= 10,
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 166/249] ALSA: hdac: Fix codec name after machine driver is unloaded and reloaded

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 8a5b0177a7f6099ff534a4d9ce72673af5c3cade ]

Currently on each driver reload internal counter is being increased. It
causes failure to enumerate driver devices, as they have hardcoded:
.codec_name = "ehdaudio0D2",
As there is currently no devices with multiple hda codecs and there is
currently no established way to reliably differentiate, between them,
always assign bus->idx = 0;

This fixes a problem when we unload and reload machine driver idx gets
incremented, so .codec_name would've needed to be set to "ehdaudio1D2"
after first reload and so on.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/ext/hdac_ext_bus.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/hda/ext/hdac_ext_bus.c b/sound/hda/ext/hdac_ext_bus.c
index a3a113ef5d56..4f9f1d2a2ec5 100644
--- a/sound/hda/ext/hdac_ext_bus.c
+++ b/sound/hda/ext/hdac_ext_bus.c
@@ -85,7 +85,6 @@ int snd_hdac_ext_bus_init(struct hdac_bus *bus, struct device *dev,
 			const struct hdac_ext_bus_ops *ext_ops)
 {
 	int ret;
-	static int idx;
 
 	/* check if io ops are provided, if not load the defaults */
 	if (io_ops == NULL)
@@ -96,7 +95,12 @@ int snd_hdac_ext_bus_init(struct hdac_bus *bus, struct device *dev,
 		return ret;
 
 	bus->ext_ops = ext_ops;
-	bus->idx = idx++;
+	/* FIXME:
+	 * Currently only one bus is supported, if there is device with more
+	 * buses, bus->idx should be greater than 0, but there needs to be a
+	 * reliable way to always assign same number.
+	 */
+	bus->idx = 0;
 	bus->cmd_dma_state = true;
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 167/249] perf tools: Increase MAX_NR_CPUS and MAX_CACHES

[Sasha Levin]

From: Kyle Meyer <kyle.meyer@hpe.com>

[ Upstream commit 9f94c7f947e919c343b30f080285af53d0fa9902 ]

Attempting to profile 1024 or more CPUs with perf causes two errors:

  perf record -a
  [ perf record: Woken up X times to write data ]
  way too many cpu caches..
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  Error: failed to set  cpu bitmap
  Requested CPU 1024 too large. Consider raising MAX_NR_CPUS

  Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
  MAX_NR_CPUS * 4 returns normal functionality to perf:

  perf record -a
  [ perf record: Woken up X times to write data ]
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  ...

Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/perf.h        | 2 +-
 tools/perf/util/header.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index d59dee61b64d..a26555baf692 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -26,7 +26,7 @@ static inline unsigned long long rdclock(void)
 }
 
 #ifndef MAX_NR_CPUS
-#define MAX_NR_CPUS			1024
+#define MAX_NR_CPUS			2048
 #endif
 
 extern const char *input_name;
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index fb0aa661644b..b82d4577d969 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -1100,7 +1100,7 @@ static int build_caches(struct cpu_cache_level caches[], u32 size, u32 *cntp)
 	return 0;
 }
 
-#define MAX_CACHES 2000
+#define MAX_CACHES (MAX_NR_CPUS * 4)
 
 static int write_cache(struct feat_fd *ff,
 		       struct perf_evlist *evlist __maybe_unused)
-- 
2.20.1

[PATCH AUTOSEL 5.2 168/249] ASoC: Intel: hdac_hdmi: Set ops to NULL on remove

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 0f6ff78540bd1b4df1e0f17806b0ce2e1dff0d78 ]

When we unload Skylake driver we may end up calling
hdac_component_master_unbind(), it uses acomp->audio_ops, which we set
in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(),
otherwise we will dereference no longer existing pointer.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hdmi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 1f57126708e7..c9f9820968bb 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1859,6 +1859,12 @@ static void hdmi_codec_remove(struct snd_soc_component *component)
 {
 	struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
 	struct hdac_device *hdev = hdmi->hdev;
+	int ret;
+
+	ret = snd_hdac_acomp_register_notifier(hdev->bus, NULL);
+	if (ret < 0)
+		dev_err(&hdev->dev, "notifier unregister failed: err: %d\n",
+				ret);
 
 	pm_runtime_disable(&hdev->dev);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 169/249] block, bfq: fix rq_in_driver check in bfq_update_inject_limit

[Sasha Levin]

From: Paolo Valente <paolo.valente@linaro.org>

[ Upstream commit db599f9ed9bd31b018b6c48ad7c6b21d5b790ecf ]

One of the cases where the parameters for injection may be updated is
when there are no more in-flight I/O requests. The number of in-flight
requests is stored in the field bfqd->rq_in_driver of the descriptor
bfqd of the device. So, the controlled condition is
bfqd->rq_in_driver == 0.

Unfortunately, this is wrong because, the instruction that checks this
condition is in the code path that handles the completion of a
request, and, in particular, the instruction is executed before
bfqd->rq_in_driver is decremented in such a code path.

This commit fixes this issue by just replacing 0 with 1 in the
comparison.

Reported-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Tested-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index e5db3856b194..404e776aa36d 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -5398,8 +5398,14 @@ static void bfq_update_inject_limit(struct bfq_data *bfqd,
 	 * total service time, and there seem to be the right
 	 * conditions to do it, or we can lower the last base value
 	 * computed.
+	 *
+	 * NOTE: (bfqd->rq_in_driver == 1) means that there is no I/O
+	 * request in flight, because this function is in the code
+	 * path that handles the completion of a request of bfqq, and,
+	 * in particular, this function is executed before
+	 * bfqd->rq_in_driver is decremented in such a code path.
 	 */
-	if ((bfqq->last_serv_time_ns == 0 && bfqd->rq_in_driver == 0) ||
+	if ((bfqq->last_serv_time_ns == 0 && bfqd->rq_in_driver == 1) ||
 	    tot_time_ns < bfqq->last_serv_time_ns) {
 		bfqq->last_serv_time_ns = tot_time_ns;
 		/*
-- 
2.20.1

[PATCH AUTOSEL 5.2 170/249] clocksource/drivers/tegra: Release all IRQ's on request_irq() error

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit 7a3916706e858ad0bc3b5629c68168e1449de26a ]

Release all requested IRQ's on the request error to properly clean up
allocated resources.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-tegra20.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index 1e7ece279730..fe5cc0963ac9 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -288,7 +288,7 @@ static int __init tegra_init_timer(struct device_node *np)
 			pr_err("%s: can't map IRQ for CPU%d\n",
 			       __func__, cpu);
 			ret = -EINVAL;
-			goto out;
+			goto out_irq;
 		}
 
 		irq_set_status_flags(cpu_to->clkevt.irq, IRQ_NOAUTOEN);
@@ -298,7 +298,8 @@ static int __init tegra_init_timer(struct device_node *np)
 		if (ret) {
 			pr_err("%s: cannot setup irq %d for CPU%d\n",
 				__func__, cpu_to->clkevt.irq, cpu);
-			ret = -EINVAL;
+			irq_dispose_mapping(cpu_to->clkevt.irq);
+			cpu_to->clkevt.irq = 0;
 			goto out_irq;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 171/249] libata: don't request sense data on !ZAC ATA devices

[Sasha Levin]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit ca156e006add67e4beea7896be395160735e09b0 ]

ZAC support added sense data requesting on error for both ZAC and ATA
devices. This seems to cause erratic error handling behaviors on some
SSDs where the device reports sense data availability and then
delivers the wrong content making EH take the wrong actions.  The
failure mode was sporadic on a LITE-ON ssd and couldn't be reliably
reproduced.

There is no value in requesting sense data from non-ZAC ATA devices
while there's a significant risk of introducing EH misbehaviors which
are difficult to reproduce and fix.  Let's do the sense data dancing
only for ZAC devices.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-eh.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 9d687e1d4325..3bfd9da58473 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1469,7 +1469,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
-	if (ata_id_has_ncq_autosense(dev->id))
+	if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
 		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
@@ -1716,7 +1716,8 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary) {
+	if (dev->class == ATA_DEV_ZAC &&
+	    ((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
 		char sense_key, asc, ascq;
 
 		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
@@ -1770,10 +1771,11 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 	}
 
 	switch (qc->dev->class) {
-	case ATA_DEV_ATA:
 	case ATA_DEV_ZAC:
 		if (stat & ATA_SENSE)
 			ata_eh_request_sense(qc, qc->scsicmd);
+		/* fall through */
+	case ATA_DEV_ATA:
 		if (err & ATA_ICRC)
 			qc->err_mask |= AC_ERR_ATA_BUS;
 		if (err & (ATA_UNC | ATA_AMNF))
-- 
2.20.1

[PATCH AUTOSEL 5.2 172/249] clocksource/drivers/tegra: Restore base address before cleanup

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit fc9babc2574691d3bbf0428f007b22261fed55c6 ]

We're adjusting the timer's base for each per-CPU timer to point to the
actual start of the timer since device-tree defines a compound registers
range that includes all of the timers. In this case the original base
need to be restore before calling iounmap to unmap the proper address.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-tegra20.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clocksource/timer-tegra20.c b/drivers/clocksource/timer-tegra20.c
index fe5cc0963ac9..462be34b41c4 100644
--- a/drivers/clocksource/timer-tegra20.c
+++ b/drivers/clocksource/timer-tegra20.c
@@ -319,6 +319,8 @@ static int __init tegra_init_timer(struct device_node *np)
 			irq_dispose_mapping(cpu_to->clkevt.irq);
 		}
 	}
+
+	to->of_base.base = timer_reg_base;
 out:
 	timer_of_cleanup(to);
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.2 173/249] clocksource/drivers/exynos_mct: Increase priority over ARM arch timer

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 6282edb72bed5324352522d732080d4c1b9dfed6 ]

Exynos SoCs based on CA7/CA15 have 2 timer interfaces: custom Exynos MCT
(Multi Core Timer) and standard ARM Architected Timers.

There are use cases, where both timer interfaces are used simultanously.
One of such examples is using Exynos MCT for the main system timer and
ARM Architected Timers for the KVM and virtualized guests (KVM requires
arch timers).

Exynos Multi-Core Timer driver (exynos_mct) must be however started
before ARM Architected Timers (arch_timer), because they both share some
common hardware blocks (global system counter) and turning on MCT is
needed to get ARM Architected Timer working properly.

To ensure selecting Exynos MCT as the main system timer, increase MCT
timer rating. To ensure proper starting order of both timers during
suspend/resume cycle, increase MCT hotplug priority over ARM Archictected
Timers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/exynos_mct.c | 4 ++--
 include/linux/cpuhotplug.h       | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index e8eab16b154b..74cb299f5089 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -206,7 +206,7 @@ static void exynos4_frc_resume(struct clocksource *cs)
 
 static struct clocksource mct_frc = {
 	.name		= "mct-frc",
-	.rating		= 400,
+	.rating		= 450,	/* use value higher than ARM arch timer */
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -461,7 +461,7 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
 	evt->set_state_oneshot_stopped = set_state_shutdown;
 	evt->tick_resume = set_state_shutdown;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->rating = 450;
+	evt->rating = 500;	/* use value higher than ARM arch timer */
 
 	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 5c6062206760..87c211adf49e 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -116,10 +116,10 @@ enum cpuhp_state {
 	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
+	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
 	CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
 	CPUHP_AP_JCORE_TIMER_STARTING,
-	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_TWD_STARTING,
 	CPUHP_AP_QCOM_TIMER_STARTING,
 	CPUHP_AP_TEGRA_TIMER_STARTING,
-- 
2.20.1

[PATCH AUTOSEL 5.2 174/249] netfilter: ctnetlink: Fix regression in conntrack entry deletion

[Sasha Levin]

From: Felix Kaechele <felix@kaechele.ca>

[ Upstream commit e7600865db32b69deb0109b8254244dca592adcf ]

Commit f8e608982022 ("netfilter: ctnetlink: Resolve conntrack
L3-protocol flush regression") introduced a regression in which deletion
of conntrack entries would fail because the L3 protocol information
is replaced by AF_UNSPEC. As a result the search for the entry to be
deleted would turn up empty due to the tuple used to perform the search
is now different from the tuple used to initially set up the entry.

For flushing the conntrack table we do however want to keep the option
for nfgenmsg->version to have a non-zero value to allow for newer
user-space tools to request treatment under the new behavior. With that
it is possible to independently flush tables for a defined L3 protocol.
This was introduced with the enhancements in in commit 59c08c69c278
("netfilter: ctnetlink: Support L3 protocol-filter on flush").

Older user-space tools will retain the behavior of flushing all tables
regardless of defined L3 protocol.

Fixes: f8e608982022 ("netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_netlink.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 7db79c1b8084..1b77444d5b52 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1256,7 +1256,6 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
 	struct nf_conntrack_tuple tuple;
 	struct nf_conn *ct;
 	struct nfgenmsg *nfmsg = nlmsg_data(nlh);
-	u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
 	struct nf_conntrack_zone zone;
 	int err;
 
@@ -1266,11 +1265,13 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
 
 	if (cda[CTA_TUPLE_ORIG])
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_ORIG,
-					    u3, &zone);
+					    nfmsg->nfgen_family, &zone);
 	else if (cda[CTA_TUPLE_REPLY])
 		err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_REPLY,
-					    u3, &zone);
+					    nfmsg->nfgen_family, &zone);
 	else {
+		u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
+
 		return ctnetlink_flush_conntrack(net, cda,
 						 NETLINK_CB(skb).portid,
 						 nlmsg_report(nlh), u3);
-- 
2.20.1

[PATCH AUTOSEL 5.2 175/249] xsk: Properly terminate assignment in xskq_produce_flush_desc

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit f7019b7b0ad14bde732b8953161994edfc384953 ]

Clang warns:

In file included from net/xdp/xsk_queue.c:10:
net/xdp/xsk_queue.h:292:2: warning: expression result unused
[-Wunused-value]
        WRITE_ONCE(q->ring->producer, q->prod_tail);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:284:6: note: expanded from macro 'WRITE_ONCE'
        __u.__val;                                      \
        ~~~ ^~~~~
1 warning generated.

The q->prod_tail assignment has a comma at the end, not a semi-colon.
Fix that so clang no longer warns and everything works as expected.

Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Link: https://github.com/ClangBuiltLinux/linux/issues/544
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xdp/xsk_queue.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index 88b9ae24658d..cba4a640d5e8 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -288,7 +288,7 @@ static inline void xskq_produce_flush_desc(struct xsk_queue *q)
 	/* Order producer and data */
 	smp_wmb(); /* B, matches C */
 
-	q->prod_tail = q->prod_head,
+	q->prod_tail = q->prod_head;
 	WRITE_ONCE(q->ring->producer, q->prod_tail);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 176/249] rslib: Fix decoding of shortened codes

[Sasha Levin]

From: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>

[ Upstream commit 2034a42d1747fc1e1eeef2c6f1789c4d0762cb9c ]

The decoding of shortenend codes is broken. It only works as expected if
there are no erasures.

When decoding with erasures, Lambda (the error and erasure locator
polynomial) is initialized from the given erasure positions. The pad
parameter is not accounted for by the initialisation code, and hence
Lambda is initialized from incorrect erasure positions.

The fix is to adjust the erasure positions by the supplied pad.

Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-3-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/reed_solomon/decode_rs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/reed_solomon/decode_rs.c b/lib/reed_solomon/decode_rs.c
index 1db74eb098d0..3313bf944ff1 100644
--- a/lib/reed_solomon/decode_rs.c
+++ b/lib/reed_solomon/decode_rs.c
@@ -99,9 +99,9 @@
 	if (no_eras > 0) {
 		/* Init lambda to be the erasure locator polynomial */
 		lambda[1] = alpha_to[rs_modnn(rs,
-					      prim * (nn - 1 - eras_pos[0]))];
+					prim * (nn - 1 - (eras_pos[0] + pad)))];
 		for (i = 1; i < no_eras; i++) {
-			u = rs_modnn(rs, prim * (nn - 1 - eras_pos[i]));
+			u = rs_modnn(rs, prim * (nn - 1 - (eras_pos[i] + pad)));
 			for (j = i + 1; j > 0; j--) {
 				tmp = index_of[lambda[j - 1]];
 				if (tmp != nn) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 177/249] bpf: fix BPF_ALU32 | BPF_ARSH on BE arches

[Sasha Levin]

From: Jiong Wang <jiong.wang@netronome.com>

[ Upstream commit 75672dda27bd00109a84cd975c17949ad9c45663 ]

Yauheni reported the following code do not work correctly on BE arches:

       ALU_ARSH_X:
               DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
               CONT;
       ALU_ARSH_K:
               DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
               CONT;

and are causing failure of test_verifier test 'arsh32 on imm 2' on BE
arches.

The code is taking address and interpreting memory directly, so is not
endianness neutral. We should instead perform standard C type casting on
the variable. A u64 to s32 conversion will drop the high 32-bit and reserve
the low 32-bit as signed integer, this is all we want.

Fixes: 2dc6b100f928 ("bpf: interpreter support BPF_ALU | BPF_ARSH")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 080e2bb644cc..f2148db91439 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1364,10 +1364,10 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
 		insn++;
 		CONT;
 	ALU_ARSH_X:
-		DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
+		DST = (u64) (u32) (((s32) DST) >> SRC);
 		CONT;
 	ALU_ARSH_K:
-		DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
+		DST = (u64) (u32) (((s32) DST) >> IMM);
 		CONT;
 	ALU64_ARSH_X:
 		(*(s64 *) &DST) >>= SRC;
-- 
2.20.1

[PATCH AUTOSEL 5.2 178/249] rslib: Fix handling of of caller provided syndrome

[Sasha Levin]

From: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>

[ Upstream commit ef4d6a8556b637ad27c8c2a2cff1dda3da38e9a9 ]

Check if the syndrome provided by the caller is zero, and act
accordingly.

Signed-off-by: Ferdinand Blomqvist <ferdinand.blomqvist@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190620141039.9874-6-ferdinand.blomqvist@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/reed_solomon/decode_rs.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/lib/reed_solomon/decode_rs.c b/lib/reed_solomon/decode_rs.c
index 3313bf944ff1..121beb2f0930 100644
--- a/lib/reed_solomon/decode_rs.c
+++ b/lib/reed_solomon/decode_rs.c
@@ -42,8 +42,18 @@
 	BUG_ON(pad < 0 || pad >= nn);
 
 	/* Does the caller provide the syndrome ? */
-	if (s != NULL)
-		goto decode;
+	if (s != NULL) {
+		for (i = 0; i < nroots; i++) {
+			/* The syndrome is in index form,
+			 * so nn represents zero
+			 */
+			if (s[i] != nn)
+				goto decode;
+		}
+
+		/* syndrome is zero, no errors to correct  */
+		return 0;
+	}
 
 	/* form the syndromes; i.e., evaluate data(x) at roots of
 	 * g(x) */
-- 
2.20.1

[PATCH AUTOSEL 5.2 179/249] gpio: Fix return value mismatch of function gpiod_get_from_of_node()

[Sasha Levin]

From: Waibel Georg <Georg.Waibel@sensor-technik.de>

[ Upstream commit 025bf37725f1929542361eef2245df30badf242e ]

In case the requested gpio property is not found in the device tree, some
callers of gpiod_get_from_of_node() expect a return value of NULL, others
expect -ENOENT.
In particular devm_fwnode_get_index_gpiod_from_child() expects -ENOENT.
Currently it gets a NULL, which breaks the loop that tries all
gpio_suffixes. The result is that a gpio property is not found, even
though it is there.

This patch changes gpiod_get_from_of_node() to return -ENOENT instead
of NULL when the requested gpio property is not found in the device
tree. Additionally it modifies all calling functions to properly
evaluate the return value.

Another approach would be to leave the return value of
gpiod_get_from_of_node() as is and fix the bug in
devm_fwnode_get_index_gpiod_from_child(). Other callers would still need
to be reworked. The effort would be the same as with the chosen solution.

Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c                 | 6 +-----
 drivers/regulator/da9211-regulator.c   | 2 ++
 drivers/regulator/s2mps11.c            | 4 +++-
 drivers/regulator/s5m8767.c            | 4 +++-
 drivers/regulator/tps65090-regulator.c | 7 ++++---
 5 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index e013d417a936..be1d1d2f8aaa 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4244,8 +4244,7 @@ EXPORT_SYMBOL_GPL(gpiod_get_index);
  *
  * Returns:
  * On successful request the GPIO pin is configured in accordance with
- * provided @dflags. If the node does not have the requested GPIO
- * property, NULL is returned.
+ * provided @dflags.
  *
  * In case of error an ERR_PTR() is returned.
  */
@@ -4267,9 +4266,6 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 					index, &flags);
 
 	if (!desc || IS_ERR(desc)) {
-		/* If it is not there, just return NULL */
-		if (PTR_ERR(desc) == -ENOENT)
-			return NULL;
 		return desc;
 	}
 
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index da37b4ccd834..0309823d2c72 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -289,6 +289,8 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 				  0,
 				  GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				  "da9211-enable");
+		if (IS_ERR(pdata->gpiod_ren[n]))
+			pdata->gpiod_ren[n] = NULL;
 		n++;
 	}
 
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 134c62db36c5..b518a81f75a3 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -821,7 +821,9 @@ static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
 				0,
 				GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 				"s2mps11-regulator");
-		if (IS_ERR(gpio[reg])) {
+		if (PTR_ERR(gpio[reg]) == -ENOENT)
+			gpio[reg] = NULL;
+		else if (IS_ERR(gpio[reg])) {
 			dev_err(&pdev->dev, "Failed to get control GPIO for %d/%s\n",
 				reg, rdata[reg].name);
 			continue;
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index bb9d1a083299..6ca27e9d5ef7 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -574,7 +574,9 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 			0,
 			GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 			"s5m8767");
-		if (IS_ERR(rdata->ext_control_gpiod))
+		if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT)
+			rdata->ext_control_gpiod = NULL;
+		else if (IS_ERR(rdata->ext_control_gpiod))
 			return PTR_ERR(rdata->ext_control_gpiod);
 
 		rdata->id = i;
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index ca39b3d55123..10ea4b5a0f55 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -371,11 +371,12 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
 								    "dcdc-ext-control-gpios", 0,
 								    gflags,
 								    "tps65090");
-			if (IS_ERR(rpdata->gpiod))
-				return ERR_CAST(rpdata->gpiod);
-			if (!rpdata->gpiod)
+			if (PTR_ERR(rpdata->gpiod) == -ENOENT) {
 				dev_err(&pdev->dev,
 					"could not find DCDC external control GPIO\n");
+				rpdata->gpiod = NULL;
+			} else if (IS_ERR(rpdata->gpiod))
+				return ERR_CAST(rpdata->gpiod);
 		}
 
 		if (of_property_read_u32(tps65090_matches[idx].of_node,
-- 
2.20.1

[PATCH AUTOSEL 5.2 180/249] net: hns3: restore the MAC autoneg state after reset

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit d736fc6c68a5f76e89a6c2c4100e3678706003a3 ]

When doing global reset, the MAC autoneg state of fibre
port is set to default, which may cause user configuration
lost. This patch fixes it by restore the MAC autoneg state
after reset.

Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 4d9bcad26f06..645b9b3e0256 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2389,6 +2389,15 @@ static int hclge_mac_init(struct hclge_dev *hdev)
 		return ret;
 	}
 
+	if (hdev->hw.mac.support_autoneg) {
+		ret = hclge_set_autoneg_en(hdev, hdev->hw.mac.autoneg);
+		if (ret) {
+			dev_err(&hdev->pdev->dev,
+				"Config mac autoneg fail ret=%d\n", ret);
+			return ret;
+		}
+	}
+
 	mac->link = 0;
 
 	if (mac->user_fec_mode & BIT(HNAE3_FEC_USER_DEF)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 181/249] net/mlx5: Get vport ACL namespace by vport index

[Sasha Levin]

From: Jianbo Liu <jianbol@mellanox.com>

[ Upstream commit f53297d67800feb5fafd94abd926c889aefee690 ]

The ingress and egress ACL root namespaces are created per vport and
stored into arrays. However, the vport number is not the same as the
index. Passing the array index, instead of vport number, to get the
correct ingress and egress acl namespace.

Fixes: 9b93ab981e3b ("net/mlx5: Separate ingress/egress namespaces for each vport")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 6a921e24cd5e..acab26b88261 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -939,7 +939,7 @@ int esw_vport_enable_egress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_EGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_EGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch egress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
@@ -1057,7 +1057,7 @@ int esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw,
 		  vport->vport, MLX5_CAP_ESW_INGRESS_ACL(dev, log_max_ft_size));
 
 	root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_INGRESS,
-						    vport->vport);
+			mlx5_eswitch_vport_num_to_index(esw, vport->vport));
 	if (!root_ns) {
 		esw_warn(dev, "Failed to get E-Switch ingress flow namespace for vport (%d)\n", vport->vport);
 		return -EOPNOTSUPP;
-- 
2.20.1

[PATCH AUTOSEL 5.2 182/249] ixgbe: Check DDM existence in transceiver before access

[Sasha Levin]

From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>

[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]

Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.

Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:

ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.

Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
 drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index acba067cc15a..7c52ae8ac005 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3226,7 +3226,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
 		page_swap = true;
 	}
 
-	if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+	if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+	    !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
 		/* We have a SFP, but it does not support SFF-8472 */
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 214b01085718..6544c4539c0d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -45,6 +45,7 @@
 #define IXGBE_SFF_SOFT_RS_SELECT_10G		0x8
 #define IXGBE_SFF_SOFT_RS_SELECT_1G		0x0
 #define IXGBE_SFF_ADDRESSING_MODE		0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED		0x40
 #define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE		0x1
 #define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE		0x8
 #define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE	0x23
-- 
2.20.1

[PATCH AUTOSEL 5.2 183/249] crypto: serpent - mark __serpent_setkey_sbox noinline

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 473971187d6727609951858c63bf12b0307ef015 ]

The same bug that gcc hit in the past is apparently now showing
up with clang, which decides to inline __serpent_setkey_sbox:

crypto/serpent_generic.c:268:5: error: stack frame size of 2112 bytes in function '__serpent_setkey' [-Werror,-Wframe-larger-than=]

Marking it 'noinline' reduces the stack usage from 2112 bytes to
192 and 96 bytes, respectively, and seems to generate more
useful object code.

Fixes: c871c10e4ea7 ("crypto: serpent - improve __serpent_setkey with UBSAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/serpent_generic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/crypto/serpent_generic.c b/crypto/serpent_generic.c
index 16f612b6dbca..a9cc0b2aa0d6 100644
--- a/crypto/serpent_generic.c
+++ b/crypto/serpent_generic.c
@@ -225,7 +225,13 @@
 	x4 ^= x2;					\
 	})
 
-static void __serpent_setkey_sbox(u32 r0, u32 r1, u32 r2, u32 r3, u32 r4, u32 *k)
+/*
+ * both gcc and clang have misoptimized this function in the past,
+ * producing horrible object code from spilling temporary variables
+ * on the stack. Forcing this part out of line avoids that.
+ */
+static noinline void __serpent_setkey_sbox(u32 r0, u32 r1, u32 r2,
+					   u32 r3, u32 r4, u32 *k)
 {
 	k += 100;
 	S3(r3, r4, r0, r1, r2); store_and_load_keys(r1, r2, r4, r3, 28, 24);
-- 
2.20.1

[PATCH AUTOSEL 5.2 184/249] crypto: asymmetric_keys - select CRYPTO_HASH where needed

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 90acc0653d2bee203174e66d519fbaaa513502de ]

Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:

crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'

This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/asymmetric_keys/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
index be70ca6c85d3..1f1f004dc757 100644
--- a/crypto/asymmetric_keys/Kconfig
+++ b/crypto/asymmetric_keys/Kconfig
@@ -15,6 +15,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 	select MPILIB
 	select CRYPTO_HASH_INFO
 	select CRYPTO_AKCIPHER
+	select CRYPTO_HASH
 	help
 	  This option provides support for asymmetric public key type handling.
 	  If signature generation and/or verification are to be used,
@@ -65,6 +66,7 @@ config TPM_KEY_PARSER
 config PKCS7_MESSAGE_PARSER
 	tristate "PKCS#7 message parser"
 	depends on X509_CERTIFICATE_PARSER
+	select CRYPTO_HASH
 	select ASN1
 	select OID_REGISTRY
 	help
@@ -87,6 +89,7 @@ config SIGNED_PE_FILE_VERIFICATION
 	bool "Support for PE file signature verification"
 	depends on PKCS7_MESSAGE_PARSER=y
 	depends on SYSTEM_DATA_VERIFICATION
+	select CRYPTO_HASH
 	select ASN1
 	select OID_REGISTRY
 	help
-- 
2.20.1

[PATCH AUTOSEL 5.2 184/249] crypto: asymmetric_keys - select CRYPTO_HASH where needed

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 90acc0653d2bee203174e66d519fbaaa513502de ]

Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:

crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'

This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 crypto/asymmetric_keys/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/crypto/asymmetric_keys/Kconfig b/crypto/asymmetric_keys/Kconfig
index be70ca6c85d3..1f1f004dc757 100644
--- a/crypto/asymmetric_keys/Kconfig
+++ b/crypto/asymmetric_keys/Kconfig
@@ -15,6 +15,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 	select MPILIB
 	select CRYPTO_HASH_INFO
 	select CRYPTO_AKCIPHER
+	select CRYPTO_HASH
 	help
 	  This option provides support for asymmetric public key type handling.
 	  If signature generation and/or verification are to be used,
@@ -65,6 +66,7 @@ config TPM_KEY_PARSER
 config PKCS7_MESSAGE_PARSER
 	tristate "PKCS#7 message parser"
 	depends on X509_CERTIFICATE_PARSER
+	select CRYPTO_HASH
 	select ASN1
 	select OID_REGISTRY
 	help
@@ -87,6 +89,7 @@ config SIGNED_PE_FILE_VERIFICATION
 	bool "Support for PE file signature verification"
 	depends on PKCS7_MESSAGE_PARSER=y
 	depends on SYSTEM_DATA_VERIFICATION
+	select CRYPTO_HASH
 	select ASN1
 	select OID_REGISTRY
 	help
-- 
2.20.1

[PATCH AUTOSEL 5.2 185/249] PCI / ACPI: Use cached ACPI device state to get PCI device power state

[Sasha Levin]

From: Mika Westerberg <mika.westerberg@linux.intel.com>

[ Upstream commit 83a16e3f6d70da99896c7a2639c0b60fff13afb8 ]

The ACPI power state returned by acpi_device_get_power() may depend on
the configuration of ACPI power resources in the system which may change
any time after acpi_device_get_power() has returned, unless the
reference counters of the ACPI power resources in question are set to
prevent that from happening. Thus it is invalid to use acpi_device_get_power()
in acpi_pci_get_power_state() the way it is done now and the value of
the ->power.state field in the corresponding struct acpi_device objects
(which reflects the ACPI power resources reference counting, among other
things) should be used instead.

As an example where this becomes an issue is Intel Ice Lake where the
Thunderbolt controller (NHI), two PCIe root ports (RP0 and RP1) and xHCI
all share the same power resources. The following picture with power
resources marked with [] shows the topology:

  Host bridge
    |
    +- RP0 ---\
    +- RP1 ---|--+--> [TBT]
    +- NHI --/   |
    |            |
    |            v
    +- xHCI --> [D3C]

Here TBT and D3C are the shared ACPI power resources. ACPI _PR3() method
of the devices in question returns either TBT or D3C or both.

Say we runtime suspend first the root ports RP0 and RP1, then NHI. Now
since the TBT power resource is still on when the root ports are runtime
suspended their dev->current_state is set to D3hot. When NHI is runtime
suspended TBT is finally turned off but state of the root ports remain
to be D3hot. Now when the xHCI is runtime suspended D3C gets also turned
off. PCI core thus has power states of these devices cached in their
dev->current_state as follows:

  RP0 -> D3hot
  RP1 -> D3hot
  NHI -> D3cold
  xHCI -> D3cold

If the user now runs lspci for instance, the result is all 1's like in
the below output (00:07.0 is the first root port, RP0):

00:07.0 PCI bridge: Intel Corporation Device 8a1d (rev ff) (prog-if ff)
    !!! Unknown header type 7f
    Kernel driver in use: pcieport

In short the hardware state is not in sync with the software state
anymore. The exact same thing happens with the PME polling thread which
ends up bringing the root ports back into D0 after they are runtime
suspended.

For this reason, modify acpi_pci_get_power_state() so that it uses the
ACPI device power state that was cached by the ACPI core. This makes the
PCI device power state match the ACPI device power state regardless of
state of the shared power resources which may still be on at this point.

Link: https://lore.kernel.org/r/20190618161858.77834-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci-acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 1897847ceb0c..b782acac26c5 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -685,7 +685,8 @@ static pci_power_t acpi_pci_get_power_state(struct pci_dev *dev)
 	if (!adev || !acpi_device_power_manageable(adev))
 		return PCI_UNKNOWN;
 
-	if (acpi_device_get_power(adev, &state) || state == ACPI_STATE_UNKNOWN)
+	state = adev->power.state;
+	if (state == ACPI_STATE_UNKNOWN)
 		return PCI_UNKNOWN;
 
 	return state_conv[state];
-- 
2.20.1

[PATCH AUTOSEL 5.2 186/249] ath9k: correctly handle short radar pulses

[Sasha Levin]

From: Zefir Kurtisi <zefir.kurtisi@neratec.com>

[ Upstream commit df5c4150501ee7e86383be88f6490d970adcf157 ]

In commit 3c0efb745a17 ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.

Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.

NOTE: ath9k drivers built thereafter will not pass DFS
certification.

This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.

Fixes: 3c0efb745a17 ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/recv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4e97f7f3b2a3..06e660858766 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -815,6 +815,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hdr *hdr;
 	bool discard_current = sc->rx.discard_next;
+	bool is_phyerr;
 
 	/*
 	 * Discard corrupt descriptors which are marked in
@@ -827,8 +828,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
 
 	/*
 	 * Discard zero-length packets and packets smaller than an ACK
+	 * which are not PHY_ERROR (short radar pulses have a length of 3)
 	 */
-	if (rx_stats->rs_datalen < 10) {
+	is_phyerr = rx_stats->rs_status & ATH9K_RXERR_PHY;
+	if (!rx_stats->rs_datalen ||
+	    (rx_stats->rs_datalen < 10 && !is_phyerr)) {
 		RX_STAT_INC(sc, rx_len_err);
 		goto corrupt;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 187/249] wil6210: drop old event after wmi_call timeout

[Sasha Levin]

From: Ahmad Masri <amasri@codeaurora.org>

[ Upstream commit 1a276003111c0404f6bfeffe924c5a21f482428b ]

This change fixes a rare race condition of handling WMI events after
wmi_call expires.

wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.

Fixing this case as a valid timeout and drop the unexpected event.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d89cd41e78ac..89a75ff29410 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -3220,7 +3220,18 @@ static void wmi_event_handle(struct wil6210_priv *wil,
 		/* check if someone waits for this event */
 		if (wil->reply_id && wil->reply_id == id &&
 		    wil->reply_mid == mid) {
-			WARN_ON(wil->reply_buf);
+			if (wil->reply_buf) {
+				/* event received while wmi_call is waiting
+				 * with a buffer. Such event should be handled
+				 * in wmi_recv_cmd function. Handling the event
+				 * here means a previous wmi_call was timeout.
+				 * Drop the event and do not handle it.
+				 */
+				wil_err(wil,
+					"Old event (%d, %s) while wmi_call is waiting. Drop it and Continue waiting\n",
+					id, eventid2name(id));
+				return;
+			}
 
 			wmi_evt_call_handler(vif, id, evt_data,
 					     len - sizeof(*wmi));
-- 
2.20.1

[PATCH AUTOSEL 5.2 188/249] EDAC: Fix global-out-of-bounds write when setting edac_mc_poll_msec

[Sasha Levin]

From: Eiichi Tsukata <devel@etsukata.com>

[ Upstream commit d8655e7630dafa88bc37f101640e39c736399771 ]

Commit 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2") assumes
edac_mc_poll_msec to be unsigned long, but the type of the variable still
remained as int. Setting edac_mc_poll_msec can trigger out-of-bounds
write.

Reproducer:

  # echo 1001 > /sys/module/edac_core/parameters/edac_mc_poll_msec

KASAN report:

  BUG: KASAN: global-out-of-bounds in edac_set_poll_msec+0x140/0x150
  Write of size 8 at addr ffffffffb91b2d00 by task bash/1996

  CPU: 1 PID: 1996 Comm: bash Not tainted 5.2.0-rc6+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  Call Trace:
   dump_stack+0xca/0x13e
   print_address_description.cold+0x5/0x246
   __kasan_report.cold+0x75/0x9a
   ? edac_set_poll_msec+0x140/0x150
   kasan_report+0xe/0x20
   edac_set_poll_msec+0x140/0x150
   ? dimmdev_location_show+0x30/0x30
   ? vfs_lock_file+0xe0/0xe0
   ? _raw_spin_lock+0x87/0xe0
   param_attr_store+0x1b5/0x310
   ? param_array_set+0x4f0/0x4f0
   module_attr_store+0x58/0x80
   ? module_attr_show+0x80/0x80
   sysfs_kf_write+0x13d/0x1a0
   kernfs_fop_write+0x2bc/0x460
   ? sysfs_kf_bin_read+0x270/0x270
   ? kernfs_notify+0x1f0/0x1f0
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7fa7caa5e970
  Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 04
  RSP: 002b:00007fff6acfdfe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007fa7caa5e970
  RDX: 0000000000000005 RSI: 0000000000e95c08 RDI: 0000000000000001
  RBP: 0000000000e95c08 R08: 00007fa7cad1e760 R09: 00007fa7cb36a700
  R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000005
  R13: 0000000000000001 R14: 00007fa7cad1d600 R15: 0000000000000005

  The buggy address belongs to the variable:
   edac_mc_poll_msec+0x0/0x40

  Memory state around the buggy address:
   ffffffffb91b2c00: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
   ffffffffb91b2c80: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa
  >ffffffffb91b2d00: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa
                     ^
   ffffffffb91b2d80: 04 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
   ffffffffb91b2e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Fix it by changing the type of edac_mc_poll_msec to unsigned int.
The reason why this patch adopts unsigned int rather than unsigned long
is msecs_to_jiffies() assumes arg to be unsigned int. We can avoid
integer conversion bugs and unsigned int will be large enough for
edac_mc_poll_msec.

Reviewed-by: James Morse <james.morse@arm.com>
Fixes: 9da21b1509d8 ("EDAC: Poll timeout cannot be zero, p2")
Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/edac_mc_sysfs.c | 16 ++++++++--------
 drivers/edac/edac_module.h   |  2 +-
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 7c01e1cc030c..4386ea4b9b5a 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -26,7 +26,7 @@
 static int edac_mc_log_ue = 1;
 static int edac_mc_log_ce = 1;
 static int edac_mc_panic_on_ue;
-static int edac_mc_poll_msec = 1000;
+static unsigned int edac_mc_poll_msec = 1000;
 
 /* Getter functions for above */
 int edac_mc_get_log_ue(void)
@@ -45,30 +45,30 @@ int edac_mc_get_panic_on_ue(void)
 }
 
 /* this is temporary */
-int edac_mc_get_poll_msec(void)
+unsigned int edac_mc_get_poll_msec(void)
 {
 	return edac_mc_poll_msec;
 }
 
 static int edac_set_poll_msec(const char *val, const struct kernel_param *kp)
 {
-	unsigned long l;
+	unsigned int i;
 	int ret;
 
 	if (!val)
 		return -EINVAL;
 
-	ret = kstrtoul(val, 0, &l);
+	ret = kstrtouint(val, 0, &i);
 	if (ret)
 		return ret;
 
-	if (l < 1000)
+	if (i < 1000)
 		return -EINVAL;
 
-	*((unsigned long *)kp->arg) = l;
+	*((unsigned int *)kp->arg) = i;
 
 	/* notify edac_mc engine to reset the poll period */
-	edac_mc_reset_delay_period(l);
+	edac_mc_reset_delay_period(i);
 
 	return 0;
 }
@@ -82,7 +82,7 @@ MODULE_PARM_DESC(edac_mc_log_ue,
 module_param(edac_mc_log_ce, int, 0644);
 MODULE_PARM_DESC(edac_mc_log_ce,
 		 "Log correctable error to console: 0=off 1=on");
-module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_int,
+module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_uint,
 		  &edac_mc_poll_msec, 0644);
 MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds");
 
diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h
index dd7d0b509aa3..75528f07abd5 100644
--- a/drivers/edac/edac_module.h
+++ b/drivers/edac/edac_module.h
@@ -36,7 +36,7 @@ extern int edac_mc_get_log_ue(void);
 extern int edac_mc_get_log_ce(void);
 extern int edac_mc_get_panic_on_ue(void);
 extern int edac_get_poll_msec(void);
-extern int edac_mc_get_poll_msec(void);
+extern unsigned int edac_mc_get_poll_msec(void);
 
 unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
 				 unsigned len);
-- 
2.20.1

[PATCH AUTOSEL 5.2 189/249] net/mlx5e: Attach/detach XDP program safely

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit e18953240de8b46360a67090c87ee1ef8160b35d ]

When an XDP program is set, a full reopen of all channels happens in two
cases:

1. When there was no program set, and a new one is being set.

2. When there was a program set, but it's being unset.

The full reopen is necessary, because the channel parameters may change
if XDP is enabled or disabled. However, it's performed in an unsafe way:
if the new channels fail to open, the old ones are already closed, and
the interface goes down. Use the safe way to switch channels instead.
The same way is already used for other configuration changes.

Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/mellanox/mlx5/core/en_main.c | 31 ++++++++++++-------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index a8e8350b38aa..8db9fdbc03ea 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4192,8 +4192,6 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 	/* no need for full reset when exchanging programs */
 	reset = (!priv->channels.params.xdp_prog || !prog);
 
-	if (was_opened && reset)
-		mlx5e_close_locked(netdev);
 	if (was_opened && !reset) {
 		/* num_channels is invariant here, so we can take the
 		 * batched reference right upfront.
@@ -4205,20 +4203,31 @@ static int mlx5e_xdp_set(struct net_device *netdev, struct bpf_prog *prog)
 		}
 	}
 
-	/* exchange programs, extra prog reference we got from caller
-	 * as long as we don't fail from this point onwards.
-	 */
-	old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	if (was_opened && reset) {
+		struct mlx5e_channels new_channels = {};
+
+		new_channels.params = priv->channels.params;
+		new_channels.params.xdp_prog = prog;
+		mlx5e_set_rq_type(priv->mdev, &new_channels.params);
+		old_prog = priv->channels.params.xdp_prog;
+
+		err = mlx5e_safe_switch_channels(priv, &new_channels, NULL);
+		if (err)
+			goto unlock;
+	} else {
+		/* exchange programs, extra prog reference we got from caller
+		 * as long as we don't fail from this point onwards.
+		 */
+		old_prog = xchg(&priv->channels.params.xdp_prog, prog);
+	}
+
 	if (old_prog)
 		bpf_prog_put(old_prog);
 
-	if (reset) /* change RQ type according to priv->xdp_prog */
+	if (!was_opened && reset) /* change RQ type according to priv->xdp_prog */
 		mlx5e_set_rq_type(priv->mdev, &priv->channels.params);
 
-	if (was_opened && reset)
-		err = mlx5e_open_locked(netdev);
-
-	if (!test_bit(MLX5E_STATE_OPENED, &priv->state) || reset)
+	if (!was_opened || reset)
 		goto unlock;
 
 	/* exchanging programs w/o reset, we update ref counts on behalf
-- 
2.20.1

[PATCH AUTOSEL 5.2 190/249] cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 70a59fde6e69d1d8579f84bf4555bfffb3ce452d ]

On some occasions cpufreq_verify_current_freq() schedules a work whose
callback is handle_update(), which further calls cpufreq_update_policy()
which may end up calling cpufreq_verify_current_freq() again.

On the other hand, when cpufreq_update_policy() is called from
handle_update(), the pointer to the cpufreq policy is already
available, but cpufreq_cpu_acquire() is still called to get it in
cpufreq_update_policy(), which should be avoided as well.

To fix these issues, create a new helper, refresh_frequency_limits(),
and make both handle_update() call it cpufreq_update_policy().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Rename reeval_frequency_limits() as refresh_frequency_limits() ]
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index e84bf0eb7239..876a4cb09de3 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1114,13 +1114,25 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
 	return ret;
 }
 
+static void refresh_frequency_limits(struct cpufreq_policy *policy)
+{
+	struct cpufreq_policy new_policy = *policy;
+
+	pr_debug("updating policy for CPU %u\n", policy->cpu);
+
+	new_policy.min = policy->user_policy.min;
+	new_policy.max = policy->user_policy.max;
+
+	cpufreq_set_policy(policy, &new_policy);
+}
+
 static void handle_update(struct work_struct *work)
 {
 	struct cpufreq_policy *policy =
 		container_of(work, struct cpufreq_policy, update);
-	unsigned int cpu = policy->cpu;
-	pr_debug("handle_update for cpu %u called\n", cpu);
-	cpufreq_update_policy(cpu);
+
+	pr_debug("handle_update for cpu %u called\n", policy->cpu);
+	refresh_frequency_limits(policy);
 }
 
 static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
@@ -2392,7 +2404,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
 void cpufreq_update_policy(unsigned int cpu)
 {
 	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
-	struct cpufreq_policy new_policy;
 
 	if (!policy)
 		return;
@@ -2405,12 +2416,7 @@ void cpufreq_update_policy(unsigned int cpu)
 	    (cpufreq_suspended || WARN_ON(!cpufreq_update_current_freq(policy))))
 		goto unlock;
 
-	pr_debug("updating policy for CPU %u\n", cpu);
-	memcpy(&new_policy, policy, sizeof(*policy));
-	new_policy.min = policy->user_policy.min;
-	new_policy.max = policy->user_policy.max;
-
-	cpufreq_set_policy(policy, &new_policy);
+	refresh_frequency_limits(policy);
 
 unlock:
 	cpufreq_cpu_release(policy);
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 190/249] cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()

[Rafael J. Wysocki]

On 7/15/2019 3:45 PM, Sasha Levin wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
>
> [ Upstream commit 70a59fde6e69d1d8579f84bf4555bfffb3ce452d ]
>
> On some occasions cpufreq_verify_current_freq() schedules a work whose
> callback is handle_update(), which further calls cpufreq_update_policy()
> which may end up calling cpufreq_verify_current_freq() again.
>
> On the other hand, when cpufreq_update_policy() is called from
> handle_update(), the pointer to the cpufreq policy is already
> available, but cpufreq_cpu_acquire() is still called to get it in
> cpufreq_update_policy(), which should be avoided as well.
>
> To fix these issues, create a new helper, refresh_frequency_limits(),
> and make both handle_update() call it cpufreq_update_policy().
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> [ rjw: Rename reeval_frequency_limits() as refresh_frequency_limits() ]
> [ rjw: Changelog ]
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   drivers/cpufreq/cpufreq.c | 26 ++++++++++++++++----------
>   1 file changed, 16 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> index e84bf0eb7239..876a4cb09de3 100644
> --- a/drivers/cpufreq/cpufreq.c
> +++ b/drivers/cpufreq/cpufreq.c
> @@ -1114,13 +1114,25 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
>   	return ret;
>   }
>   
> +static void refresh_frequency_limits(struct cpufreq_policy *policy)
> +{
> +	struct cpufreq_policy new_policy = *policy;
> +
> +	pr_debug("updating policy for CPU %u\n", policy->cpu);
> +
> +	new_policy.min = policy->user_policy.min;
> +	new_policy.max = policy->user_policy.max;
> +
> +	cpufreq_set_policy(policy, &new_policy);
> +}
> +
>   static void handle_update(struct work_struct *work)
>   {
>   	struct cpufreq_policy *policy =
>   		container_of(work, struct cpufreq_policy, update);
> -	unsigned int cpu = policy->cpu;
> -	pr_debug("handle_update for cpu %u called\n", cpu);
> -	cpufreq_update_policy(cpu);
> +
> +	pr_debug("handle_update for cpu %u called\n", policy->cpu);
> +	refresh_frequency_limits(policy);
>   }
>   
>   static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
> @@ -2392,7 +2404,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
>   void cpufreq_update_policy(unsigned int cpu)
>   {
>   	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
> -	struct cpufreq_policy new_policy;
>   
>   	if (!policy)
>   		return;
> @@ -2405,12 +2416,7 @@ void cpufreq_update_policy(unsigned int cpu)
>   	    (cpufreq_suspended || WARN_ON(!cpufreq_update_current_freq(policy))))
>   		goto unlock;
>   
> -	pr_debug("updating policy for CPU %u\n", cpu);
> -	memcpy(&new_policy, policy, sizeof(*policy));
> -	new_policy.min = policy->user_policy.min;
> -	new_policy.max = policy->user_policy.max;
> -
> -	cpufreq_set_policy(policy, &new_policy);
> +	refresh_frequency_limits(policy);
>   
>   unlock:
>   	cpufreq_cpu_release(policy);

I don't think this is suitable for -stable.

Re: [PATCH AUTOSEL 5.2 190/249] cpufreq: Avoid calling cpufreq_verify_current_freq() from handle_update()

[Sasha Levin]

On Tue, Jul 16, 2019 at 11:25:00AM +0200, Rafael J. Wysocki wrote:
>On 7/15/2019 3:45 PM, Sasha Levin wrote:
>>From: Viresh Kumar <viresh.kumar@linaro.org>
>>
>>[ Upstream commit 70a59fde6e69d1d8579f84bf4555bfffb3ce452d ]
>>
>>On some occasions cpufreq_verify_current_freq() schedules a work whose
>>callback is handle_update(), which further calls cpufreq_update_policy()
>>which may end up calling cpufreq_verify_current_freq() again.
>>
>>On the other hand, when cpufreq_update_policy() is called from
>>handle_update(), the pointer to the cpufreq policy is already
>>available, but cpufreq_cpu_acquire() is still called to get it in
>>cpufreq_update_policy(), which should be avoided as well.
>>
>>To fix these issues, create a new helper, refresh_frequency_limits(),
>>and make both handle_update() call it cpufreq_update_policy().
>>
>>Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>[ rjw: Rename reeval_frequency_limits() as refresh_frequency_limits() ]
>>[ rjw: Changelog ]
>>Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>---
>>  drivers/cpufreq/cpufreq.c | 26 ++++++++++++++++----------
>>  1 file changed, 16 insertions(+), 10 deletions(-)
>>
>>diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
>>index e84bf0eb7239..876a4cb09de3 100644
>>--- a/drivers/cpufreq/cpufreq.c
>>+++ b/drivers/cpufreq/cpufreq.c
>>@@ -1114,13 +1114,25 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
>>  	return ret;
>>  }
>>+static void refresh_frequency_limits(struct cpufreq_policy *policy)
>>+{
>>+	struct cpufreq_policy new_policy = *policy;
>>+
>>+	pr_debug("updating policy for CPU %u\n", policy->cpu);
>>+
>>+	new_policy.min = policy->user_policy.min;
>>+	new_policy.max = policy->user_policy.max;
>>+
>>+	cpufreq_set_policy(policy, &new_policy);
>>+}
>>+
>>  static void handle_update(struct work_struct *work)
>>  {
>>  	struct cpufreq_policy *policy =
>>  		container_of(work, struct cpufreq_policy, update);
>>-	unsigned int cpu = policy->cpu;
>>-	pr_debug("handle_update for cpu %u called\n", cpu);
>>-	cpufreq_update_policy(cpu);
>>+
>>+	pr_debug("handle_update for cpu %u called\n", policy->cpu);
>>+	refresh_frequency_limits(policy);
>>  }
>>  static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
>>@@ -2392,7 +2404,6 @@ int cpufreq_set_policy(struct cpufreq_policy *policy,
>>  void cpufreq_update_policy(unsigned int cpu)
>>  {
>>  	struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu);
>>-	struct cpufreq_policy new_policy;
>>  	if (!policy)
>>  		return;
>>@@ -2405,12 +2416,7 @@ void cpufreq_update_policy(unsigned int cpu)
>>  	    (cpufreq_suspended || WARN_ON(!cpufreq_update_current_freq(policy))))
>>  		goto unlock;
>>-	pr_debug("updating policy for CPU %u\n", cpu);
>>-	memcpy(&new_policy, policy, sizeof(*policy));
>>-	new_policy.min = policy->user_policy.min;
>>-	new_policy.max = policy->user_policy.max;
>>-
>>-	cpufreq_set_policy(policy, &new_policy);
>>+	refresh_frequency_limits(policy);
>>  unlock:
>>  	cpufreq_cpu_release(policy);
>
>I don't think this is suitable for -stable.

I've dropped it, thanks!

--
Thanks,
Sasha

[PATCH AUTOSEL 5.2 191/249] cpufreq: Don't skip frequency validation for has_target() drivers

[Sasha Levin]

From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 9801522840cc1073f8064b4c979b7b6995c74bca ]

CPUFREQ_CONST_LOOPS was introduced in a very old commit from pre-2.6
kernel release by commit 6a4a93f9c0d5 ("[CPUFREQ] Fix 'out of sync'
issue").

Basically, that commit does two things:

 - It adds the frequency verification code (which is quite similar to
   what we have today as well).

 - And it sets the CPUFREQ_CONST_LOOPS flag only for setpolicy drivers,
   rightly so based on the code we had then. The idea was to avoid
   frequency validation for setpolicy drivers as the cpufreq core doesn't
   know what frequency the hardware is running at and so no point in
   doing frequency verification.

The problem happened when we started to use the same CPUFREQ_CONST_LOOPS
flag for constant loops-per-jiffy thing as well and many has_target()
drivers started using the same flag and unknowingly skipped the
verification of frequency. There is no logical reason behind skipping
frequency validation because of the presence of CPUFREQ_CONST_LOOPS
flag otherwise.

Fix this issue by skipping frequency validation only for setpolicy
drivers and always doing it for has_target() drivers irrespective of
the presence or absence of CPUFREQ_CONST_LOOPS flag.

cpufreq_notify_transition() is only called for has_target() type driver
and not for set_policy type, and the check is simply redundant. Remove
it as well.

Also remove () around freq comparison statement as they aren't required
and checkpatch also warns for them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 876a4cb09de3..7d37efb43621 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -356,12 +356,10 @@ static void cpufreq_notify_transition(struct cpufreq_policy *policy,
 		 * which is not equal to what the cpufreq core thinks is
 		 * "old frequency".
 		 */
-		if (!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
-			if (policy->cur && (policy->cur != freqs->old)) {
-				pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
-					 freqs->old, policy->cur);
-				freqs->old = policy->cur;
-			}
+		if (policy->cur && policy->cur != freqs->old) {
+			pr_debug("Warning: CPU frequency is %u, cpufreq assumed %u kHz\n",
+				 freqs->old, policy->cur);
+			freqs->old = policy->cur;
 		}
 
 		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
@@ -1627,8 +1625,7 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
 	if (policy->fast_switch_enabled)
 		return ret_freq;
 
-	if (ret_freq && policy->cur &&
-		!(cpufreq_driver->flags & CPUFREQ_CONST_LOOPS)) {
+	if (has_target() && ret_freq && policy->cur) {
 		/* verify no discrepancy between actual and
 					saved value exists */
 		if (unlikely(ret_freq != policy->cur)) {
-- 
2.20.1

[PATCH AUTOSEL 5.2 192/249] bcache: fix return value error in bch_journal_read()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 0ae49cb7aa005ed18fe8f4d6ccf73019b78ac7b2 ]

When everything is OK in bch_journal_read(), finally the return value
is returned by,
	return ret;
which assumes ret will be 0 here. This assumption is wrong when all
journal buckets as are full and filled with valid journal entries. In
such cache the last location referencess read_bucket() sets 'ret' to
1, which means new jset added into jset list. The jset list is list
'journal' in caller run_cache_set().

Return 1 to run_cache_set() means something wrong and the cache set
won't start, but indeed everything is OK.

This patch changes the line at end of bch_journal_read() to directly
return 0 since everything if verything is good. Then a bogus error
is fixed.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/journal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c
index 12dae9348147..4e5fc05720fc 100644
--- a/drivers/md/bcache/journal.c
+++ b/drivers/md/bcache/journal.c
@@ -268,7 +268,7 @@ int bch_journal_read(struct cache_set *c, struct list_head *list)
 					    struct journal_replay,
 					    list)->j.seq;
 
-	return ret;
+	return 0;
 #undef read_bucket
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 193/249] bcache: check CACHE_SET_IO_DISABLE in allocator code

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit e775339e1ae1205b47d94881db124c11385e597c ]

If CACHE_SET_IO_DISABLE of a cache set flag is set by too many I/O
errors, currently allocator routines can still continue allocate
space which may introduce inconsistent metadata state.

This patch checkes CACHE_SET_IO_DISABLE bit in following allocator
routines,
- bch_bucket_alloc()
- __bch_bucket_alloc_set()
Once CACHE_SET_IO_DISABLE is set on cache set, the allocator routines
may reject allocation request earlier to avoid potential inconsistent
metadata.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/alloc.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/md/bcache/alloc.c b/drivers/md/bcache/alloc.c
index f8986effcb50..6f776823b9ba 100644
--- a/drivers/md/bcache/alloc.c
+++ b/drivers/md/bcache/alloc.c
@@ -393,6 +393,11 @@ long bch_bucket_alloc(struct cache *ca, unsigned int reserve, bool wait)
 	struct bucket *b;
 	long r;
 
+
+	/* No allocation if CACHE_SET_IO_DISABLE bit is set */
+	if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &ca->set->flags)))
+		return -1;
+
 	/* fastpath */
 	if (fifo_pop(&ca->free[RESERVE_NONE], r) ||
 	    fifo_pop(&ca->free[reserve], r))
@@ -484,6 +489,10 @@ int __bch_bucket_alloc_set(struct cache_set *c, unsigned int reserve,
 {
 	int i;
 
+	/* No allocation if CACHE_SET_IO_DISABLE bit is set */
+	if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &c->flags)))
+		return -1;
+
 	lockdep_assert_held(&c->bucket_lock);
 	BUG_ON(!n || n > c->caches_loaded || n > MAX_CACHES_PER_SET);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 194/249] bcache: check CACHE_SET_IO_DISABLE bit in bch_journal()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 383ff2183ad16a8842d1fbd9dd3e1cbd66813e64 ]

When too many I/O errors happen on cache set and CACHE_SET_IO_DISABLE
bit is set, bch_journal() may continue to work because the journaling
bkey might be still in write set yet. The caller of bch_journal() may
believe the journal still work but the truth is in-memory journal write
set won't be written into cache device any more. This behavior may
introduce potential inconsistent metadata status.

This patch checks CACHE_SET_IO_DISABLE bit at the head of bch_journal(),
if the bit is set, bch_journal() returns NULL immediately to notice
caller to know journal does not work.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/journal.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/md/bcache/journal.c b/drivers/md/bcache/journal.c
index 4e5fc05720fc..54f8886b6177 100644
--- a/drivers/md/bcache/journal.c
+++ b/drivers/md/bcache/journal.c
@@ -811,6 +811,10 @@ atomic_t *bch_journal(struct cache_set *c,
 	struct journal_write *w;
 	atomic_t *ret;
 
+	/* No journaling if CACHE_SET_IO_DISABLE set already */
+	if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &c->flags)))
+		return NULL;
+
 	if (!CACHE_SYNC(&c->sb))
 		return NULL;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 195/249] bcache: acquire bch_register_lock later in cached_dev_free()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 80265d8dfd77792e133793cef44a21323aac2908 ]

When enable lockdep engine, a lockdep warning can be observed when
reboot or shutdown system,

[ 3142.764557][    T1] bcache: bcache_reboot() Stopping all devices:
[ 3142.776265][ T2649]
[ 3142.777159][ T2649] ======================================================
[ 3142.780039][ T2649] WARNING: possible circular locking dependency detected
[ 3142.782869][ T2649] 5.2.0-rc4-lp151.20-default+ #1 Tainted: G        W
[ 3142.785684][ T2649] ------------------------------------------------------
[ 3142.788479][ T2649] kworker/3:67/2649 is trying to acquire lock:
[ 3142.790738][ T2649] 00000000aaf02291 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0
[ 3142.794678][ T2649]
[ 3142.794678][ T2649] but task is already holding lock:
[ 3142.797402][ T2649] 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache]
[ 3142.801462][ T2649]
[ 3142.801462][ T2649] which lock already depends on the new lock.
[ 3142.801462][ T2649]
[ 3142.805277][ T2649]
[ 3142.805277][ T2649] the existing dependency chain (in reverse order) is:
[ 3142.808902][ T2649]
[ 3142.808902][ T2649] -> #2 (&bch_register_lock){+.+.}:
[ 3142.812396][ T2649]        __mutex_lock+0x7a/0x9d0
[ 3142.814184][ T2649]        cached_dev_free+0x17/0x120 [bcache]
[ 3142.816415][ T2649]        process_one_work+0x2a4/0x640
[ 3142.818413][ T2649]        worker_thread+0x39/0x3f0
[ 3142.820276][ T2649]        kthread+0x125/0x140
[ 3142.822061][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.823965][ T2649]
[ 3142.823965][ T2649] -> #1 ((work_completion)(&cl->work)#2){+.+.}:
[ 3142.827244][ T2649]        process_one_work+0x277/0x640
[ 3142.829160][ T2649]        worker_thread+0x39/0x3f0
[ 3142.830958][ T2649]        kthread+0x125/0x140
[ 3142.832674][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.834915][ T2649]
[ 3142.834915][ T2649] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}:
[ 3142.838121][ T2649]        lock_acquire+0xb4/0x1c0
[ 3142.840025][ T2649]        flush_workqueue+0xae/0x4c0
[ 3142.842035][ T2649]        drain_workqueue+0xa9/0x180
[ 3142.844042][ T2649]        destroy_workqueue+0x17/0x250
[ 3142.846142][ T2649]        cached_dev_free+0x52/0x120 [bcache]
[ 3142.848530][ T2649]        process_one_work+0x2a4/0x640
[ 3142.850663][ T2649]        worker_thread+0x39/0x3f0
[ 3142.852464][ T2649]        kthread+0x125/0x140
[ 3142.854106][ T2649]        ret_from_fork+0x3a/0x50
[ 3142.855880][ T2649]
[ 3142.855880][ T2649] other info that might help us debug this:
[ 3142.855880][ T2649]
[ 3142.859663][ T2649] Chain exists of:
[ 3142.859663][ T2649]   (wq_completion)bcache_writeback_wq --> (work_completion)(&cl->work)#2 --> &bch_register_lock
[ 3142.859663][ T2649]
[ 3142.865424][ T2649]  Possible unsafe locking scenario:
[ 3142.865424][ T2649]
[ 3142.868022][ T2649]        CPU0                    CPU1
[ 3142.869885][ T2649]        ----                    ----
[ 3142.871751][ T2649]   lock(&bch_register_lock);
[ 3142.873379][ T2649]                                lock((work_completion)(&cl->work)#2);
[ 3142.876399][ T2649]                                lock(&bch_register_lock);
[ 3142.879727][ T2649]   lock((wq_completion)bcache_writeback_wq);
[ 3142.882064][ T2649]
[ 3142.882064][ T2649]  *** DEADLOCK ***
[ 3142.882064][ T2649]
[ 3142.885060][ T2649] 3 locks held by kworker/3:67/2649:
[ 3142.887245][ T2649]  #0: 00000000e774cdd0 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640
[ 3142.890815][ T2649]  #1: 00000000f7df89da ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[ 3142.894884][ T2649]  #2: 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache]
[ 3142.898797][ T2649]
[ 3142.898797][ T2649] stack backtrace:
[ 3142.900961][ T2649] CPU: 3 PID: 2649 Comm: kworker/3:67 Tainted: G        W         5.2.0-rc4-lp151.20-default+ #1
[ 3142.904789][ T2649] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[ 3142.909168][ T2649] Workqueue: events cached_dev_free [bcache]
[ 3142.911422][ T2649] Call Trace:
[ 3142.912656][ T2649]  dump_stack+0x85/0xcb
[ 3142.914181][ T2649]  print_circular_bug+0x19a/0x1f0
[ 3142.916193][ T2649]  __lock_acquire+0x16cd/0x1850
[ 3142.917936][ T2649]  ? __lock_acquire+0x6a8/0x1850
[ 3142.919704][ T2649]  ? lock_acquire+0xb4/0x1c0
[ 3142.921335][ T2649]  ? find_held_lock+0x34/0xa0
[ 3142.923052][ T2649]  lock_acquire+0xb4/0x1c0
[ 3142.924635][ T2649]  ? flush_workqueue+0x87/0x4c0
[ 3142.926375][ T2649]  flush_workqueue+0xae/0x4c0
[ 3142.928047][ T2649]  ? flush_workqueue+0x87/0x4c0
[ 3142.929824][ T2649]  ? drain_workqueue+0xa9/0x180
[ 3142.931686][ T2649]  drain_workqueue+0xa9/0x180
[ 3142.933534][ T2649]  destroy_workqueue+0x17/0x250
[ 3142.935787][ T2649]  cached_dev_free+0x52/0x120 [bcache]
[ 3142.937795][ T2649]  process_one_work+0x2a4/0x640
[ 3142.939803][ T2649]  worker_thread+0x39/0x3f0
[ 3142.941487][ T2649]  ? process_one_work+0x640/0x640
[ 3142.943389][ T2649]  kthread+0x125/0x140
[ 3142.944894][ T2649]  ? kthread_create_worker_on_cpu+0x70/0x70
[ 3142.947744][ T2649]  ret_from_fork+0x3a/0x50
[ 3142.970358][ T2649] bcache: bcache_device_free() bcache0 stopped

Here is how the deadlock happens.
1) bcache_reboot() calls bcache_device_stop(), then inside
   bcache_device_stop() BCACHE_DEV_CLOSING bit is set on d->flags.
   Then closure_queue(&d->cl) is called to invoke cached_dev_flush().
2) In cached_dev_flush(), cached_dev_free() is called by continu_at().
3) In cached_dev_free(), when stopping the writeback kthread of the
   cached device by kthread_stop(), dc->writeback_thread will be waken
   up to quite the kthread while-loop, then cached_dev_put() is called
   in bch_writeback_thread().
4) Calling cached_dev_put() in writeback kthread may drop dc->count to
   0, then dc->detach kworker is scheduled, which is initialized as
   cached_dev_detach_finish().
5) Inside cached_dev_detach_finish(), the last line of code is to call
   closure_put(&dc->disk.cl), which drops the last reference counter of
   closrure dc->disk.cl, then the callback cached_dev_flush() gets
   called.
Now cached_dev_flush() is called for second time in the code path, the
first time is in step 2). And again bch_register_lock will be acquired
again, and a A-A lock (lockdep terminology) is happening.

The root cause of the above A-A lock is in cached_dev_free(), mutex
bch_register_lock is held before stopping writeback kthread and other
kworkers. Fortunately now we have variable 'bcache_is_reboot', which may
prevent device registration or unregistration during reboot/shutdown
time, so it is unncessary to hold bch_register_lock such early now.

This is how this patch fixes the reboot/shutdown time A-A lock issue:
After moving mutex_lock(&bch_register_lock) to a later location where
before atomic_read(&dc->running) in cached_dev_free(), such A-A lock
problem can be solved without any reboot time registration race.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 1b63ac876169..0a25774e175a 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1190,8 +1190,6 @@ static void cached_dev_free(struct closure *cl)
 {
 	struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl);
 
-	mutex_lock(&bch_register_lock);
-
 	if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
 		cancel_writeback_rate_update_dwork(dc);
 
@@ -1202,6 +1200,8 @@ static void cached_dev_free(struct closure *cl)
 	if (!IS_ERR_OR_NULL(dc->status_update_thread))
 		kthread_stop(dc->status_update_thread);
 
+	mutex_lock(&bch_register_lock);
+
 	if (atomic_read(&dc->running))
 		bd_unlink_disk_holder(dc->bdev, dc->disk.disk);
 	bcache_device_free(&dc->disk);
-- 
2.20.1

[PATCH AUTOSEL 5.2 196/249] bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit b387e9b58679c60f5b1e4313939bd4878204fc37 ]

When system memory is in heavy pressure, bch_gc_thread_start() from
run_cache_set() may fail due to out of memory. In such condition,
c->gc_thread is assigned to -ENOMEM, not NULL pointer. Then in following
failure code path bch_cache_set_error(), when cache_set_flush() gets
called, the code piece to stop c->gc_thread is broken,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

And KASAN catches such NULL pointer deference problem, with the warning
information:

[  561.207881] ==================================================================
[  561.207900] BUG: KASAN: null-ptr-deref in kthread_stop+0x3b/0x440
[  561.207904] Write of size 4 at addr 000000000000001c by task kworker/15:1/313

[  561.207913] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G        W         5.0.0-vanilla+ #3
[  561.207916] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.207935] Workqueue: events cache_set_flush [bcache]
[  561.207940] Call Trace:
[  561.207948]  dump_stack+0x9a/0xeb
[  561.207955]  ? kthread_stop+0x3b/0x440
[  561.207960]  ? kthread_stop+0x3b/0x440
[  561.207965]  kasan_report+0x176/0x192
[  561.207973]  ? kthread_stop+0x3b/0x440
[  561.207981]  kthread_stop+0x3b/0x440
[  561.207995]  cache_set_flush+0xd4/0x6d0 [bcache]
[  561.208008]  process_one_work+0x856/0x1620
[  561.208015]  ? find_held_lock+0x39/0x1d0
[  561.208028]  ? drain_workqueue+0x380/0x380
[  561.208048]  worker_thread+0x87/0xb80
[  561.208058]  ? __kthread_parkme+0xb6/0x180
[  561.208067]  ? process_one_work+0x1620/0x1620
[  561.208072]  kthread+0x326/0x3e0
[  561.208079]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  561.208090]  ret_from_fork+0x3a/0x50
[  561.208110] ==================================================================
[  561.208113] Disabling lock debugging due to kernel taint
[  561.208115] irq event stamp: 11800231
[  561.208126] hardirqs last  enabled at (11800231): [<ffffffff83008538>] do_syscall_64+0x18/0x410
[  561.208127] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[  561.208129] #PF error: [WRITE]
[  561.312253] hardirqs last disabled at (11800230): [<ffffffff830052ff>] trace_hardirqs_off_thunk+0x1a/0x1c
[  561.312259] softirqs last  enabled at (11799832): [<ffffffff850005c7>] __do_softirq+0x5c7/0x8c3
[  561.405975] PGD 0 P4D 0
[  561.442494] softirqs last disabled at (11799821): [<ffffffff831add2c>] irq_exit+0x1ac/0x1e0
[  561.791359] Oops: 0002 [#1] SMP KASAN NOPTI
[  561.791362] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G    B   W         5.0.0-vanilla+ #3
[  561.791363] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.791371] Workqueue: events cache_set_flush [bcache]
[  561.791374] RIP: 0010:kthread_stop+0x3b/0x440
[  561.791376] Code: 00 00 65 8b 05 26 d5 e0 7c 89 c0 48 0f a3 05 ec aa df 02 0f 82 dc 02 00 00 4c 8d 63 20 be 04 00 00 00 4c 89 e7 e8 65 c5 53 00 <f0> ff 43 20 48 8d 7b 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
[  561.791377] RSP: 0018:ffff88872fc8fd10 EFLAGS: 00010286
[  561.838895] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838916] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838934] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838948] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838966] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838979] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838996] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.067028] RAX: 0000000000000000 RBX: fffffffffffffffc RCX: ffffffff832dd314
[  563.067030] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000297
[  563.067032] RBP: ffff88872fc8fe88 R08: fffffbfff0b8213d R09: fffffbfff0b8213d
[  563.067034] R10: 0000000000000001 R11: fffffbfff0b8213c R12: 000000000000001c
[  563.408618] R13: ffff88dc61cc0f68 R14: ffff888102b94900 R15: ffff88dc61cc0f68
[  563.408620] FS:  0000000000000000(0000) GS:ffff888f7dc00000(0000) knlGS:0000000000000000
[  563.408622] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  563.408623] CR2: 000000000000001c CR3: 0000000f48a1a004 CR4: 00000000007606e0
[  563.408625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  563.408627] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  563.904795] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.915796] PKRU: 55555554
[  563.915797] Call Trace:
[  563.915807]  cache_set_flush+0xd4/0x6d0 [bcache]
[  563.915812]  process_one_work+0x856/0x1620
[  564.001226] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.033563]  ? find_held_lock+0x39/0x1d0
[  564.033567]  ? drain_workqueue+0x380/0x380
[  564.033574]  worker_thread+0x87/0xb80
[  564.062823] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.118042]  ? __kthread_parkme+0xb6/0x180
[  564.118046]  ? process_one_work+0x1620/0x1620
[  564.118048]  kthread+0x326/0x3e0
[  564.118050]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  564.167066] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.252441]  ret_from_fork+0x3a/0x50
[  564.252447] Modules linked in: msr rpcrdma sunrpc rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib i40iw configfs iw_cm ib_cm libiscsi scsi_transport_iscsi mlx4_ib ib_uverbs mlx4_en ib_core nls_iso8859_1 nls_cp437 vfat fat intel_rapl skx_edac x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ses raid0 aesni_intel cdc_ether enclosure usbnet ipmi_ssif joydev aes_x86_64 i40e scsi_transport_sas mii bcache md_mod crypto_simd mei_me ioatdma crc64 ptp cryptd pcspkr i2c_i801 mlx4_core glue_helper pps_core mei lpc_ich dca wmi ipmi_si ipmi_devintf nd_pmem dax_pmem nd_btt ipmi_msghandler device_dax pcc_cpufreq button hid_generic usbhid mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd ttm megaraid_sas drm usbcore nfit libnvdimm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[  564.299390] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.348360] CR2: 000000000000001c
[  564.348362] ---[ end trace b7f0e5cc7b2103b0 ]---

Therefore, it is not enough to only check whether c->gc_thread is NULL,
we should use IS_ERR_OR_NULL() to check both NULL pointer and error
value.

This patch changes the above buggy code piece in this way,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 0a25774e175a..4cc8a300a557 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1564,7 +1564,7 @@ static void cache_set_flush(struct closure *cl)
 	kobject_put(&c->internal);
 	kobject_del(&c->kobj);
 
-	if (c->gc_thread)
+	if (!IS_ERR_OR_NULL(c->gc_thread))
 		kthread_stop(c->gc_thread);
 
 	if (!IS_ERR_OR_NULL(c->root))
-- 
2.20.1

[PATCH AUTOSEL 5.2 196/249] bcache: check c->gc_thread by IS_ERR_OR_NULL in cache_set_flush()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit b387e9b58679c60f5b1e4313939bd4878204fc37 ]

When system memory is in heavy pressure, bch_gc_thread_start() from
run_cache_set() may fail due to out of memory. In such condition,
c->gc_thread is assigned to -ENOMEM, not NULL pointer. Then in following
failure code path bch_cache_set_error(), when cache_set_flush() gets
called, the code piece to stop c->gc_thread is broken,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

And KASAN catches such NULL pointer deference problem, with the warning
information:

[  561.207881] ==================================================================
[  561.207900] BUG: KASAN: null-ptr-deref in kthread_stop+0x3b/0x440
[  561.207904] Write of size 4 at addr 000000000000001c by task kworker/15:1/313

[  561.207913] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G        W         5.0.0-vanilla+ #3
[  561.207916] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.207935] Workqueue: events cache_set_flush [bcache]
[  561.207940] Call Trace:
[  561.207948]  dump_stack+0x9a/0xeb
[  561.207955]  ? kthread_stop+0x3b/0x440
[  561.207960]  ? kthread_stop+0x3b/0x440
[  561.207965]  kasan_report+0x176/0x192
[  561.207973]  ? kthread_stop+0x3b/0x440
[  561.207981]  kthread_stop+0x3b/0x440
[  561.207995]  cache_set_flush+0xd4/0x6d0 [bcache]
[  561.208008]  process_one_work+0x856/0x1620
[  561.208015]  ? find_held_lock+0x39/0x1d0
[  561.208028]  ? drain_workqueue+0x380/0x380
[  561.208048]  worker_thread+0x87/0xb80
[  561.208058]  ? __kthread_parkme+0xb6/0x180
[  561.208067]  ? process_one_work+0x1620/0x1620
[  561.208072]  kthread+0x326/0x3e0
[  561.208079]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  561.208090]  ret_from_fork+0x3a/0x50
[  561.208110] ==================================================================
[  561.208113] Disabling lock debugging due to kernel taint
[  561.208115] irq event stamp: 11800231
[  561.208126] hardirqs last  enabled at (11800231): [<ffffffff83008538>] do_syscall_64+0x18/0x410
[  561.208127] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
[  561.208129] #PF error: [WRITE]
[  561.312253] hardirqs last disabled at (11800230): [<ffffffff830052ff>] trace_hardirqs_off_thunk+0x1a/0x1c
[  561.312259] softirqs last  enabled at (11799832): [<ffffffff850005c7>] __do_softirq+0x5c7/0x8c3
[  561.405975] PGD 0 P4D 0
[  561.442494] softirqs last disabled at (11799821): [<ffffffff831add2c>] irq_exit+0x1ac/0x1e0
[  561.791359] Oops: 0002 [#1] SMP KASAN NOPTI
[  561.791362] CPU: 15 PID: 313 Comm: kworker/15:1 Tainted: G    B   W         5.0.0-vanilla+ #3
[  561.791363] Hardware name: Lenovo ThinkSystem SR650 -[7X05CTO1WW]-/-[7X05CTO1WW]-, BIOS -[IVE136T-2.10]- 03/22/2019
[  561.791371] Workqueue: events cache_set_flush [bcache]
[  561.791374] RIP: 0010:kthread_stop+0x3b/0x440
[  561.791376] Code: 00 00 65 8b 05 26 d5 e0 7c 89 c0 48 0f a3 05 ec aa df 02 0f 82 dc 02 00 00 4c 8d 63 20 be 04 00 00 00 4c 89 e7 e8 65 c5 53 00 <f0> ff 43 20 48 8d 7b 24 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
[  561.791377] RSP: 0018:ffff88872fc8fd10 EFLAGS: 00010286
[  561.838895] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838916] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838934] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838948] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838966] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838979] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  561.838996] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.067028] RAX: 0000000000000000 RBX: fffffffffffffffc RCX: ffffffff832dd314
[  563.067030] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000297
[  563.067032] RBP: ffff88872fc8fe88 R08: fffffbfff0b8213d R09: fffffbfff0b8213d
[  563.067034] R10: 0000000000000001 R11: fffffbfff0b8213c R12: 000000000000001c
[  563.408618] R13: ffff88dc61cc0f68 R14: ffff888102b94900 R15: ffff88dc61cc0f68
[  563.408620] FS:  0000000000000000(0000) GS:ffff888f7dc00000(0000) knlGS:0000000000000000
[  563.408622] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  563.408623] CR2: 000000000000001c CR3: 0000000f48a1a004 CR4: 00000000007606e0
[  563.408625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  563.408627] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  563.904795] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  563.915796] PKRU: 55555554
[  563.915797] Call Trace:
[  563.915807]  cache_set_flush+0xd4/0x6d0 [bcache]
[  563.915812]  process_one_work+0x856/0x1620
[  564.001226] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.033563]  ? find_held_lock+0x39/0x1d0
[  564.033567]  ? drain_workqueue+0x380/0x380
[  564.033574]  worker_thread+0x87/0xb80
[  564.062823] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.118042]  ? __kthread_parkme+0xb6/0x180
[  564.118046]  ? process_one_work+0x1620/0x1620
[  564.118048]  kthread+0x326/0x3e0
[  564.118050]  ? kthread_create_worker_on_cpu+0xc0/0xc0
[  564.167066] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.252441]  ret_from_fork+0x3a/0x50
[  564.252447] Modules linked in: msr rpcrdma sunrpc rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib i40iw configfs iw_cm ib_cm libiscsi scsi_transport_iscsi mlx4_ib ib_uverbs mlx4_en ib_core nls_iso8859_1 nls_cp437 vfat fat intel_rapl skx_edac x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ses raid0 aesni_intel cdc_ether enclosure usbnet ipmi_ssif joydev aes_x86_64 i40e scsi_transport_sas mii bcache md_mod crypto_simd mei_me ioatdma crc64 ptp cryptd pcspkr i2c_i801 mlx4_core glue_helper pps_core mei lpc_ich dca wmi ipmi_si ipmi_devintf nd_pmem dax_pmem nd_btt ipmi_msghandler device_dax pcc_cpufreq button hid_generic usbhid mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect xhci_pci sysimgblt fb_sys_fops xhci_hcd
  ttm megaraid_sas drm usbcore nfit libnvdimm sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[  564.299390] bcache: bch_count_io_errors() nvme0n1: IO error on writing btree.
[  564.348360] CR2: 000000000000001c
[  564.348362] ---[ end trace b7f0e5cc7b2103b0 ]---

Therefore, it is not enough to only check whether c->gc_thread is NULL,
we should use IS_ERR_OR_NULL() to check both NULL pointer and error
value.

This patch changes the above buggy code piece in this way,
         if (!IS_ERR_OR_NULL(c->gc_thread))
                 kthread_stop(c->gc_thread);

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 0a25774e175a..4cc8a300a557 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1564,7 +1564,7 @@ static void cache_set_flush(struct closure *cl)
 	kobject_put(&c->internal);
 	kobject_del(&c->kobj);
 
-	if (c->gc_thread)
+	if (!IS_ERR_OR_NULL(c->gc_thread))
 		kthread_stop(c->gc_thread);
 
 	if (!IS_ERR_OR_NULL(c->root))
-- 
2.20.1

[PATCH AUTOSEL 5.2 197/249] bcache: avoid a deadlock in bcache_reboot()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit a59ff6ccc2bf2e2934b31bbf734f0bc04b5ec78a ]

It is quite frequently to observe deadlock in bcache_reboot() happens
and hang the system reboot process. The reason is, in bcache_reboot()
when calling bch_cache_set_stop() and bcache_device_stop() the mutex
bch_register_lock is held. But in the process to stop cache set and
bcache device, bch_register_lock will be acquired again. If this mutex
is held here, deadlock will happen inside the stopping process. The
aftermath of the deadlock is, whole system reboot gets hung.

The fix is to avoid holding bch_register_lock for the following loops
in bcache_reboot(),
       list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
                bch_cache_set_stop(c);

        list_for_each_entry_safe(dc, tdc, &uncached_devices, list)
                bcache_device_stop(&dc->disk);

A module range variable 'bcache_is_reboot' is added, it sets to true
in bcache_reboot(). In register_bcache(), if bcache_is_reboot is checked
to be true, reject the registration by returning -EBUSY immediately.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c | 40 ++++++++++++++++++++++++++++++++++++++-
 drivers/md/bcache/sysfs.c | 26 +++++++++++++++++++++++++
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 4cc8a300a557..dcd8b319a01e 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -40,6 +40,7 @@ static const char invalid_uuid[] = {
 
 static struct kobject *bcache_kobj;
 struct mutex bch_register_lock;
+bool bcache_is_reboot;
 LIST_HEAD(bch_cache_sets);
 static LIST_HEAD(uncached_devices);
 
@@ -49,6 +50,7 @@ static wait_queue_head_t unregister_wait;
 struct workqueue_struct *bcache_wq;
 struct workqueue_struct *bch_journal_wq;
 
+
 #define BTREE_MAX_PAGES		(256 * 1024 / PAGE_SIZE)
 /* limitation of partitions number on single bcache device */
 #define BCACHE_MINORS		128
@@ -2301,6 +2303,11 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr,
 	if (!try_module_get(THIS_MODULE))
 		return -EBUSY;
 
+	/* For latest state of bcache_is_reboot */
+	smp_mb();
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	path = kstrndup(buffer, size, GFP_KERNEL);
 	if (!path)
 		goto err;
@@ -2380,6 +2387,9 @@ static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr,
 
 static int bcache_reboot(struct notifier_block *n, unsigned long code, void *x)
 {
+	if (bcache_is_reboot)
+		return NOTIFY_DONE;
+
 	if (code == SYS_DOWN ||
 	    code == SYS_HALT ||
 	    code == SYS_POWER_OFF) {
@@ -2392,19 +2402,45 @@ static int bcache_reboot(struct notifier_block *n, unsigned long code, void *x)
 
 		mutex_lock(&bch_register_lock);
 
+		if (bcache_is_reboot)
+			goto out;
+
+		/* New registration is rejected since now */
+		bcache_is_reboot = true;
+		/*
+		 * Make registering caller (if there is) on other CPU
+		 * core know bcache_is_reboot set to true earlier
+		 */
+		smp_mb();
+
 		if (list_empty(&bch_cache_sets) &&
 		    list_empty(&uncached_devices))
 			goto out;
 
+		mutex_unlock(&bch_register_lock);
+
 		pr_info("Stopping all devices:");
 
+		/*
+		 * The reason bch_register_lock is not held to call
+		 * bch_cache_set_stop() and bcache_device_stop() is to
+		 * avoid potential deadlock during reboot, because cache
+		 * set or bcache device stopping process will acqurie
+		 * bch_register_lock too.
+		 *
+		 * We are safe here because bcache_is_reboot sets to
+		 * true already, register_bcache() will reject new
+		 * registration now. bcache_is_reboot also makes sure
+		 * bcache_reboot() won't be re-entered on by other thread,
+		 * so there is no race in following list iteration by
+		 * list_for_each_entry_safe().
+		 */
 		list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
 			bch_cache_set_stop(c);
 
 		list_for_each_entry_safe(dc, tdc, &uncached_devices, list)
 			bcache_device_stop(&dc->disk);
 
-		mutex_unlock(&bch_register_lock);
 
 		/*
 		 * Give an early chance for other kthreads and
@@ -2531,6 +2567,8 @@ static int __init bcache_init(void)
 	bch_debug_init();
 	closure_debug_init();
 
+	bcache_is_reboot = false;
+
 	return 0;
 err:
 	bcache_exit();
diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
index bfb437ffb13c..327493f634bb 100644
--- a/drivers/md/bcache/sysfs.c
+++ b/drivers/md/bcache/sysfs.c
@@ -16,6 +16,8 @@
 #include <linux/sort.h>
 #include <linux/sched/clock.h>
 
+extern bool bcache_is_reboot;
+
 /* Default is 0 ("writethrough") */
 static const char * const bch_cache_modes[] = {
 	"writethrough",
@@ -271,6 +273,10 @@ STORE(__cached_dev)
 	struct cache_set *c;
 	struct kobj_uevent_env *env;
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 #define d_strtoul(var)		sysfs_strtoul(var, dc->var)
 #define d_strtoul_nonzero(var)	sysfs_strtoul_clamp(var, dc->var, 1, INT_MAX)
 #define d_strtoi_h(var)		sysfs_hatoi(var, dc->var)
@@ -408,6 +414,10 @@ STORE(bch_cached_dev)
 	struct cached_dev *dc = container_of(kobj, struct cached_dev,
 					     disk.kobj);
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	mutex_lock(&bch_register_lock);
 	size = __cached_dev_store(kobj, attr, buf, size);
 
@@ -511,6 +521,10 @@ STORE(__bch_flash_dev)
 					       kobj);
 	struct uuid_entry *u = &d->c->uuids[d->id];
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	sysfs_strtoul(data_csum,	d->data_csum);
 
 	if (attr == &sysfs_size) {
@@ -746,6 +760,10 @@ STORE(__bch_cache_set)
 	struct cache_set *c = container_of(kobj, struct cache_set, kobj);
 	ssize_t v;
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	if (attr == &sysfs_unregister)
 		bch_cache_set_unregister(c);
 
@@ -865,6 +883,10 @@ STORE(bch_cache_set_internal)
 {
 	struct cache_set *c = container_of(kobj, struct cache_set, internal);
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	return bch_cache_set_store(&c->kobj, attr, buf, size);
 }
 
@@ -1050,6 +1072,10 @@ STORE(__bch_cache)
 	struct cache *ca = container_of(kobj, struct cache, kobj);
 	ssize_t v;
 
+	/* no user space access if system is rebooting */
+	if (bcache_is_reboot)
+		return -EBUSY;
+
 	if (attr == &sysfs_discard) {
 		bool v = strtoul_or_return(buf);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 198/249] bcache: fix potential deadlock in cached_def_free()

[Sasha Levin]

From: Coly Li <colyli@suse.de>

[ Upstream commit 7e865eba00a3df2dc8c4746173a8ca1c1c7f042e ]

When enable lockdep and reboot system with a writeback mode bcache
device, the following potential deadlock warning is reported by lockdep
engine.

[  101.536569][  T401] kworker/2:2/401 is trying to acquire lock:
[  101.538575][  T401] 00000000bbf6e6c7 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0
[  101.542054][  T401]
[  101.542054][  T401] but task is already holding lock:
[  101.544587][  T401] 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[  101.548386][  T401]
[  101.548386][  T401] which lock already depends on the new lock.
[  101.548386][  T401]
[  101.551874][  T401]
[  101.551874][  T401] the existing dependency chain (in reverse order) is:
[  101.555000][  T401]
[  101.555000][  T401] -> #1 ((work_completion)(&cl->work)#2){+.+.}:
[  101.557860][  T401]        process_one_work+0x277/0x640
[  101.559661][  T401]        worker_thread+0x39/0x3f0
[  101.561340][  T401]        kthread+0x125/0x140
[  101.562963][  T401]        ret_from_fork+0x3a/0x50
[  101.564718][  T401]
[  101.564718][  T401] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}:
[  101.567701][  T401]        lock_acquire+0xb4/0x1c0
[  101.569651][  T401]        flush_workqueue+0xae/0x4c0
[  101.571494][  T401]        drain_workqueue+0xa9/0x180
[  101.573234][  T401]        destroy_workqueue+0x17/0x250
[  101.575109][  T401]        cached_dev_free+0x44/0x120 [bcache]
[  101.577304][  T401]        process_one_work+0x2a4/0x640
[  101.579357][  T401]        worker_thread+0x39/0x3f0
[  101.581055][  T401]        kthread+0x125/0x140
[  101.582709][  T401]        ret_from_fork+0x3a/0x50
[  101.584592][  T401]
[  101.584592][  T401] other info that might help us debug this:
[  101.584592][  T401]
[  101.588355][  T401]  Possible unsafe locking scenario:
[  101.588355][  T401]
[  101.590974][  T401]        CPU0                    CPU1
[  101.592889][  T401]        ----                    ----
[  101.594743][  T401]   lock((work_completion)(&cl->work)#2);
[  101.596785][  T401]                                lock((wq_completion)bcache_writeback_wq);
[  101.600072][  T401]                                lock((work_completion)(&cl->work)#2);
[  101.602971][  T401]   lock((wq_completion)bcache_writeback_wq);
[  101.605255][  T401]
[  101.605255][  T401]  *** DEADLOCK ***
[  101.605255][  T401]
[  101.608310][  T401] 2 locks held by kworker/2:2/401:
[  101.610208][  T401]  #0: 00000000cf2c7d17 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640
[  101.613709][  T401]  #1: 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640
[  101.617480][  T401]
[  101.617480][  T401] stack backtrace:
[  101.619539][  T401] CPU: 2 PID: 401 Comm: kworker/2:2 Tainted: G        W         5.2.0-rc4-lp151.20-default+ #1
[  101.623225][  T401] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018
[  101.627210][  T401] Workqueue: events cached_dev_free [bcache]
[  101.629239][  T401] Call Trace:
[  101.630360][  T401]  dump_stack+0x85/0xcb
[  101.631777][  T401]  print_circular_bug+0x19a/0x1f0
[  101.633485][  T401]  __lock_acquire+0x16cd/0x1850
[  101.635184][  T401]  ? __lock_acquire+0x6a8/0x1850
[  101.636863][  T401]  ? lock_acquire+0xb4/0x1c0
[  101.638421][  T401]  ? find_held_lock+0x34/0xa0
[  101.640015][  T401]  lock_acquire+0xb4/0x1c0
[  101.641513][  T401]  ? flush_workqueue+0x87/0x4c0
[  101.643248][  T401]  flush_workqueue+0xae/0x4c0
[  101.644832][  T401]  ? flush_workqueue+0x87/0x4c0
[  101.646476][  T401]  ? drain_workqueue+0xa9/0x180
[  101.648303][  T401]  drain_workqueue+0xa9/0x180
[  101.649867][  T401]  destroy_workqueue+0x17/0x250
[  101.651503][  T401]  cached_dev_free+0x44/0x120 [bcache]
[  101.653328][  T401]  process_one_work+0x2a4/0x640
[  101.655029][  T401]  worker_thread+0x39/0x3f0
[  101.656693][  T401]  ? process_one_work+0x640/0x640
[  101.658501][  T401]  kthread+0x125/0x140
[  101.660012][  T401]  ? kthread_create_worker_on_cpu+0x70/0x70
[  101.661985][  T401]  ret_from_fork+0x3a/0x50
[  101.691318][  T401] bcache: bcache_device_free() bcache0 stopped

Here is how the above potential deadlock may happen in reboot/shutdown
code path,
1) bcache_reboot() is called firstly in the reboot/shutdown code path,
   then in bcache_reboot(), bcache_device_stop() is called.
2) bcache_device_stop() sets BCACHE_DEV_CLOSING on d->falgs, then call
   closure_queue(&d->cl) to invoke cached_dev_flush(). And in turn
   cached_dev_flush() calls cached_dev_free() via closure_at()
3) In cached_dev_free(), after stopped writebach kthread
   dc->writeback_thread, the kwork dc->writeback_write_wq is stopping by
   destroy_workqueue().
4) Inside destroy_workqueue(), drain_workqueue() is called. Inside
   drain_workqueue(), flush_workqueue() is called. Then wq->lockdep_map
   is acquired by lock_map_acquire() in flush_workqueue(). After the
   lock acquired the rest part of flush_workqueue() just wait for the
   workqueue to complete.
5) Now we look back at writeback thread routine bch_writeback_thread(),
   in the main while-loop, write_dirty() is called via continue_at() in
   read_dirty_submit(), which is called via continue_at() in while-loop
   level called function read_dirty(). Inside write_dirty() it may be
   re-called on workqueeu dc->writeback_write_wq via continue_at().
   It means when the writeback kthread is stopped in cached_dev_free()
   there might be still one kworker queued on dc->writeback_write_wq
   to execute write_dirty() again.
6) Now this kworker is scheduled on dc->writeback_write_wq to run by
   process_one_work() (which is called by worker_thread()). Before
   calling the kwork routine, wq->lockdep_map is acquired.
7) But wq->lockdep_map is acquired already in step 4), so a A-A lock
   (lockdep terminology) scenario happens.

Indeed on multiple cores syatem, the above deadlock is very rare to
happen, just as the code comments in process_one_work() says,
2263     * AFAICT there is no possible deadlock scenario between the
2264     * flush_work() and complete() primitives (except for
	   single-threaded
2265     * workqueues), so hiding them isn't a problem.

But it is still good to fix such lockdep warning, even no one running
bcache on single core system.

The fix is simple. This patch solves the above potential deadlock by,
- Do not destroy workqueue dc->writeback_write_wq in cached_dev_free().
- Flush and destroy dc->writeback_write_wq in writebach kthread routine
  bch_writeback_thread(), where after quit the thread main while-loop
  and before cached_dev_put() is called.

By this fix, dc->writeback_write_wq will be stopped and destroy before
the writeback kthread stopped, so the chance for a A-A locking on
wq->lockdep_map is disappeared, such A-A deadlock won't happen
any more.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/bcache/super.c     | 2 --
 drivers/md/bcache/writeback.c | 4 ++++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index dcd8b319a01e..4ccc5e5fe3a1 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -1197,8 +1197,6 @@ static void cached_dev_free(struct closure *cl)
 
 	if (!IS_ERR_OR_NULL(dc->writeback_thread))
 		kthread_stop(dc->writeback_thread);
-	if (dc->writeback_write_wq)
-		destroy_workqueue(dc->writeback_write_wq);
 	if (!IS_ERR_OR_NULL(dc->status_update_thread))
 		kthread_stop(dc->status_update_thread);
 
diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
index 73f0efac2b9f..df0f4e5a051a 100644
--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -735,6 +735,10 @@ static int bch_writeback_thread(void *arg)
 		}
 	}
 
+	if (dc->writeback_write_wq) {
+		flush_workqueue(dc->writeback_write_wq);
+		destroy_workqueue(dc->writeback_write_wq);
+	}
 	cached_dev_put(dc);
 	wait_for_kthread_stop();
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 199/249] net: hns3: fix a -Wformat-nonliteral compile warning

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit 18d219b783da61a6cc77581f55fc4af2fa16bc36 ]

When setting -Wformat=2, there is a compiler warning like this:

hclge_main.c:xxx:x: warning: format not a string literal and no
format arguments [-Wformat-nonliteral]
strs[i].desc);
^~~~

This patch adds missing format parameter "%s" to snprintf() to
fix it.

Fixes: 46a3df9f9718 ("Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 645b9b3e0256..f661281de36b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -552,8 +552,7 @@ static u8 *hclge_comm_get_strings(u32 stringset,
 		return buff;
 
 	for (i = 0; i < size; i++) {
-		snprintf(buff, ETH_GSTRING_LEN,
-			 strs[i].desc);
+		snprintf(buff, ETH_GSTRING_LEN, "%s", strs[i].desc);
 		buff = buff + ETH_GSTRING_LEN;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 200/249] net: hns3: add some error checking in hclge_tm module

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 04f25edb48c441fc278ecc154c270f16966cbb90 ]

When hdev->tx_sch_mode is HCLGE_FLAG_VNET_BASE_SCH_MODE, the
hclge_tm_schd_mode_vnet_base_cfg calls hclge_tm_pri_schd_mode_cfg
with vport->vport_id as pri_id, which is used as index for
hdev->tm_info.tc_info, it will cause out of bound access issue
if vport_id is equal to or larger than HNAE3_MAX_TC.

Also hardware only support maximum speed of HCLGE_ETHER_MAX_RATE.

So this patch adds two checks for above cases.

Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index a7bbb6d3091a..0d53062f7bb5 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -54,7 +54,8 @@ static int hclge_shaper_para_calc(u32 ir, u8 shaper_level,
 	u32 tick;
 
 	/* Calc tick */
-	if (shaper_level >= HCLGE_SHAPER_LVL_CNT)
+	if (shaper_level >= HCLGE_SHAPER_LVL_CNT ||
+	    ir > HCLGE_ETHER_MAX_RATE)
 		return -EINVAL;
 
 	tick = tick_array[shaper_level];
@@ -1124,6 +1125,9 @@ static int hclge_tm_schd_mode_vnet_base_cfg(struct hclge_vport *vport)
 	int ret;
 	u8 i;
 
+	if (vport->vport_id >= HNAE3_MAX_TC)
+		return -EINVAL;
+
 	ret = hclge_tm_pri_schd_mode_cfg(hdev, vport->vport_id);
 	if (ret)
 		return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.2 201/249] ath10k: Fix memory leak in qmi

[Sasha Levin]

From: Dundi Raviteja <dundi@codeaurora.org>

[ Upstream commit c709df58832c5f575f0255bea4b09ad477fc62ea ]

Currently the memory allocated for qmi handle is
not being freed during de-init which leads to memory leak.

Free the allocated qmi memory in qmi deinit
to avoid memory leak.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: fda6fee0001e ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Dundi Raviteja <dundi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/qmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index a7bc2c70d076..8f8f717a23ee 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -1002,6 +1002,7 @@ int ath10k_qmi_deinit(struct ath10k *ar)
 	qmi_handle_release(&qmi->qmi_hdl);
 	cancel_work_sync(&qmi->event_work);
 	destroy_workqueue(qmi->event_wq);
+	kfree(qmi);
 	ar_snoc->qmi = NULL;
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 201/249] ath10k: Fix memory leak in qmi

[Sasha Levin]

From: Dundi Raviteja <dundi@codeaurora.org>

[ Upstream commit c709df58832c5f575f0255bea4b09ad477fc62ea ]

Currently the memory allocated for qmi handle is
not being freed during de-init which leads to memory leak.

Free the allocated qmi memory in qmi deinit
to avoid memory leak.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: fda6fee0001e ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Dundi Raviteja <dundi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/qmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index a7bc2c70d076..8f8f717a23ee 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -1002,6 +1002,7 @@ int ath10k_qmi_deinit(struct ath10k *ar)
 	qmi_handle_release(&qmi->qmi_hdl);
 	cancel_work_sync(&qmi->event_work);
 	destroy_workqueue(qmi->event_wq);
+	kfree(qmi);
 	ar_snoc->qmi = NULL;
 
 	return 0;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 202/249] ath10k: destroy sdio workqueue while remove sdio module

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]

The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 73ef3e75d199..28bdf0212538 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2081,6 +2081,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 	cancel_work_sync(&ar_sdio->wr_async_work);
 	ath10k_core_unregister(ar);
 	ath10k_core_destroy(ar);
+
+	flush_workqueue(ar_sdio->workqueue);
+	destroy_workqueue(ar_sdio->workqueue);
 }
 
 static const struct sdio_device_id ath10k_sdio_devices[] = {
-- 
2.20.1

[PATCH AUTOSEL 5.2 202/249] ath10k: destroy sdio workqueue while remove sdio module

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]

The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 73ef3e75d199..28bdf0212538 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2081,6 +2081,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 	cancel_work_sync(&ar_sdio->wr_async_work);
 	ath10k_core_unregister(ar);
 	ath10k_core_destroy(ar);
+
+	flush_workqueue(ar_sdio->workqueue);
+	destroy_workqueue(ar_sdio->workqueue);
 }
 
 static const struct sdio_device_id ath10k_sdio_devices[] = {
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.2 203/249] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift

[Sasha Levin]

From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]

The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.

This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.

This shift can be negative in some cases, such as in IPv6 parsing.

This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
 	}
 
 	/* Set value */
-	pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+	pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+		shift & MVPP2_PRS_SRAM_SHIFT_MASK;
 
 	/* Reset and set operation */
 	mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
-- 
2.20.1

[PATCH AUTOSEL 5.2 204/249] igb: clear out skb->tstamp after reading the txtime

[Sasha Levin]

From: Vedang Patel <vedang.patel@intel.com>

[ Upstream commit 1e08511d5d01884a3c9070afd52a47799312074a ]

If a packet which is utilizing the launchtime feature (via SO_TXTIME socket
option) also requests the hardware transmit timestamp, the hardware
timestamp is not delivered to the userspace. This is because the value in
skb->tstamp is mistaken as the software timestamp.

Applications, like ptp4l, request a hardware timestamp by setting the
SOF_TIMESTAMPING_TX_HARDWARE socket option. Whenever a new timestamp is
detected by the driver (this work is done in igb_ptp_tx_work() which calls
igb_ptp_tx_hwtstamps() in igb_ptp.c[1]), it will queue the timestamp in the
ERR_QUEUE for the userspace to read. When the userspace is ready, it will
issue a recvmsg() call to collect this timestamp.  The problem is in this
recvmsg() call. If the skb->tstamp is not cleared out, it will be
interpreted as a software timestamp and the hardware tx timestamp will not
be successfully sent to the userspace. Look at skb_is_swtx_tstamp() and the
callee function __sock_recv_timestamp() in net/socket.c for more details.

Signed-off-by: Vedang Patel <vedang.patel@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 39f33afc479c..005c1693efc8 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5687,6 +5687,7 @@ static void igb_tx_ctxtdesc(struct igb_ring *tx_ring,
 	 */
 	if (tx_ring->launchtime_enable) {
 		ts = ns_to_timespec64(first->skb->tstamp);
+		first->skb->tstamp = 0;
 		context_desc->seqnum_seed = cpu_to_le32(ts.tv_nsec / 32);
 	} else {
 		context_desc->seqnum_seed = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 205/249] net: hns3: add Asym Pause support to fix autoneg problem

[Sasha Levin]

From: Yonglong Liu <liuyonglong@huawei.com>

[ Upstream commit bc3781edcea017aa1a29abd953b776cdba298ce2 ]

Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.

We except the result is:
Local device:
Autonegotiate:  on
RX:             on
TX:             off
RX negotiated:  on
TX negotiated:  off

Link partner:
Autonegotiate:  on
RX:             off
TX:             on
RX negotiated:  off
TX negotiated:  on

But actually, the result of Local device and link partner is both:
Autonegotiate:  on
RX:             off
TX:             off
RX negotiated:  off
TX negotiated:  off

The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
	...
	linkmode_and(phydev->advertising, phydev->advertising,
		     phydev->supported);
	...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.

This patch adds Asym_Pause to the supported flag to fix it.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index f661281de36b..bab04d2d674a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -1057,6 +1057,7 @@ static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
 	linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
 }
 
 static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 1e8134892d77..32d6a59b731a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -224,6 +224,13 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
 	linkmode_and(phydev->supported, phydev->supported, mask);
 	linkmode_copy(phydev->advertising, phydev->supported);
 
+	/* supported flag is Pause and Asym Pause, but default advertising
+	 * should be rx on, tx on, so need clear Asym Pause in advertising
+	 * flag
+	 */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			   phydev->advertising);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 206/249] net: ethernet: ti: cpsw: Assign OF node to slave devices

[Sasha Levin]

From: Marek Vasut <marex@denx.de>

[ Upstream commit 337d1727a3895775b5e5ef67d3ca0fea2e2ae768 ]

Assign OF node to CPSW slave devices, otherwise it is not possible to
bind e.g. DSA switch to them. Without this patch, the DSA code tries
to find the ethernet device by OF match, but fails to do so because
the slave device has NULL OF node.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c      | 3 +++
 drivers/net/ethernet/ti/cpsw_priv.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 634fc484a0b3..4e3026f9abed 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2179,6 +2179,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 			return ret;
 		}
 
+		slave_data->slave_node = slave_node;
 		slave_data->phy_node = of_parse_phandle(slave_node,
 							"phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);
@@ -2330,6 +2331,7 @@ static int cpsw_probe_dual_emac(struct cpsw_priv *priv)
 
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, cpsw->dev);
+	ndev->dev.of_node = cpsw->slaves[1].data->slave_node;
 	ret = register_netdev(ndev);
 	if (ret)
 		dev_err(cpsw->dev, "cpsw: error registering net device\n");
@@ -2507,6 +2509,7 @@ static int cpsw_probe(struct platform_device *pdev)
 
 	/* register the network device */
 	SET_NETDEV_DEV(ndev, dev);
+	ndev->dev.of_node = cpsw->slaves[0].data->slave_node;
 	ret = register_netdev(ndev);
 	if (ret) {
 		dev_err(dev, "error registering net device\n");
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index 04795b97ee71..e32f11da2dce 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -272,6 +272,7 @@ struct cpsw_host_regs {
 };
 
 struct cpsw_slave_data {
+	struct device_node *slave_node;
 	struct device_node *phy_node;
 	char		phy_id[MII_BUS_ID_SIZE];
 	int		phy_if;
-- 
2.20.1

[PATCH AUTOSEL 5.2 207/249] ixgbe: Avoid NULL pointer dereference with VF on non-IPsec hw

[Sasha Levin]

From: Dann Frazier <dann.frazier@canonical.com>

[ Upstream commit 92924064106e410cdc015f1dbfc0499309f9f5b1 ]

An ipsec structure will not be allocated if the hardware does not support
offload. Fixes the following Oops:

[  191.045452] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  191.054232] Mem abort info:
[  191.057014]   ESR = 0x96000004
[  191.060057]   Exception class = DABT (current EL), IL = 32 bits
[  191.065963]   SET = 0, FnV = 0
[  191.069004]   EA = 0, S1PTW = 0
[  191.072132] Data abort info:
[  191.074999]   ISV = 0, ISS = 0x00000004
[  191.078822]   CM = 0, WnR = 0
[  191.081780] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000043d9e467
[  191.088382] [0000000000000000] pgd=0000000000000000
[  191.093252] Internal error: Oops: 96000004 [#1] SMP
[  191.098119] Modules linked in: vhost_net vhost tap vfio_pci vfio_virqfd vfio_iommu_type1 vfio xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter devlink ebtables ip6table_filter ip6_tables iptable_filter bpfilter ipmi_ssif nls_iso8859_1 input_leds joydev ipmi_si hns_roce_hw_v2 ipmi_devintf hns_roce ipmi_msghandler cppc_cpufreq sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 ses enclosure btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear ixgbevf hibmc_drm ttm
[  191.168607]  drm_kms_helper aes_ce_blk aes_ce_cipher syscopyarea crct10dif_ce sysfillrect ghash_ce qla2xxx sysimgblt sha2_ce sha256_arm64 hisi_sas_v3_hw fb_sys_fops sha1_ce uas nvme_fc mpt3sas ixgbe drm hisi_sas_main nvme_fabrics usb_storage hclge scsi_transport_fc ahci libsas hnae3 raid_class libahci xfrm_algo scsi_transport_sas mdio aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64
[  191.202952] CPU: 94 PID: 0 Comm: swapper/94 Not tainted 4.19.0-rc1+ #11
[  191.209553] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.20.01 04/26/2019
[  191.218064] pstate: 20400089 (nzCv daIf +PAN -UAO)
[  191.222873] pc : ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.228093] lr : ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.233044] sp : ffff000009b3bcd0
[  191.236346] x29: ffff000009b3bcd0 x28: 0000000000000000
[  191.241647] x27: ffff000009628000 x26: 0000000000000000
[  191.246946] x25: ffff803f652d7600 x24: 0000000000000004
[  191.252246] x23: ffff803f6a718900 x22: 0000000000000000
[  191.257546] x21: 0000000000000000 x20: 0000000000000000
[  191.262845] x19: 0000000000000000 x18: 0000000000000000
[  191.268144] x17: 0000000000000000 x16: 0000000000000000
[  191.273443] x15: 0000000000000000 x14: 0000000100000026
[  191.278742] x13: 0000000100000025 x12: ffff8a5f7fbe0df0
[  191.284042] x11: 000000010000000b x10: 0000000000000040
[  191.289341] x9 : 0000000000001100 x8 : ffff803f6a824fd8
[  191.294640] x7 : ffff803f6a825098 x6 : 0000000000000001
[  191.299939] x5 : ffff000000f0ffc0 x4 : 0000000000000000
[  191.305238] x3 : ffff000028c00000 x2 : ffff803f652d7600
[  191.310538] x1 : 0000000000000000 x0 : ffff000000f205f0
[  191.315838] Process swapper/94 (pid: 0, stack limit = 0x00000000addfed5a)
[  191.322613] Call trace:
[  191.325055]  ixgbe_ipsec_vf_clear+0x60/0xd0 [ixgbe]
[  191.329927]  ixgbe_msg_task+0x2d0/0x1088 [ixgbe]
[  191.334536]  ixgbe_msix_other+0x274/0x330 [ixgbe]
[  191.339233]  __handle_irq_event_percpu+0x78/0x270
[  191.343924]  handle_irq_event_percpu+0x40/0x98
[  191.348355]  handle_irq_event+0x50/0xa8
[  191.352180]  handle_fasteoi_irq+0xbc/0x148
[  191.356263]  generic_handle_irq+0x34/0x50
[  191.360259]  __handle_domain_irq+0x68/0xc0
[  191.364343]  gic_handle_irq+0x84/0x180
[  191.368079]  el1_irq+0xe8/0x180
[  191.371208]  arch_cpu_idle+0x30/0x1a8
[  191.374860]  do_idle+0x1dc/0x2a0
[  191.378077]  cpu_startup_entry+0x2c/0x30
[  191.381988]  secondary_start_kernel+0x150/0x1e0
[  191.386506] Code: 6b15003f 54000320 f1404a9f 54000060 (79400260)

Fixes: eda0333ac2930 ("ixgbe: add VF IPsec management")
Signed-off-by: Dann Frazier <dann.frazier@canonical.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index ff85ce5791a3..31629fc7e820 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -842,6 +842,9 @@ void ixgbe_ipsec_vf_clear(struct ixgbe_adapter *adapter, u32 vf)
 	struct ixgbe_ipsec *ipsec = adapter->ipsec;
 	int i;
 
+	if (!ipsec)
+		return;
+
 	/* search rx sa table */
 	for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT && ipsec->num_rx_sa; i++) {
 		if (!ipsec->rx_tbl[i].used)
-- 
2.20.1

[PATCH AUTOSEL 5.2 208/249] iwlwifi: mvm: Drop large non sta frames

[Sasha Levin]

From: Andrei Otcheretianski <andrei.otcheretianski@intel.com>

[ Upstream commit ac70499ee97231a418dc1a4d6c9dc102e8f64631 ]

In some buggy scenarios we could possible attempt to transmit frames larger
than maximum MSDU size. Since our devices don't know how to handle this,
it may result in asserts, hangs etc.
This can happen, for example, when we receive a large multicast frame
and try to transmit it back to the air in AP mode.
Since in a legal scenario this should never happen, drop such frames and
warn about it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 0c2aabc842f9..96f8d38ea321 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -726,6 +726,9 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb)
 
 	memcpy(&info, skb->cb, sizeof(info));
 
+	if (WARN_ON_ONCE(skb->len > IEEE80211_MAX_DATA_LEN + hdrlen))
+		return -1;
+
 	if (WARN_ON_ONCE(info.flags & IEEE80211_TX_CTL_AMPDU))
 		return -1;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 209/249] bpf: fix uapi bpf_prog_info fields alignment

[Sasha Levin]

From: Baruch Siach <baruch@tkos.co.il>

[ Upstream commit 0472301a28f6cf53a6bc5783e48a2d0bbff4682f ]

Merge commit 1c8c5a9d38f60 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next") undid the
fix from commit 36f9814a494 ("bpf: fix uapi hole for 32 bit compat
applications") by taking the gpl_compatible 1-bit field definition from
commit b85fab0e67b162 ("bpf: Add gpl_compatible flag to struct
bpf_prog_info") as is. That breaks architectures with 16-bit alignment
like m68k. Add 31-bit pad after gpl_compatible to restore alignment of
following fields.

Thanks to Dmitry V. Levin his analysis of this bug history.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/bpf.h       | 1 +
 tools/include/uapi/linux/bpf.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index a8b823c30b43..29a5bc3d5c66 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -3143,6 +3143,7 @@ struct bpf_prog_info {
 	char name[BPF_OBJ_NAME_LEN];
 	__u32 ifindex;
 	__u32 gpl_compatible:1;
+	__u32 :31; /* alignment pad */
 	__u64 netns_dev;
 	__u64 netns_ino;
 	__u32 nr_jited_ksyms;
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index a8b823c30b43..29a5bc3d5c66 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -3143,6 +3143,7 @@ struct bpf_prog_info {
 	char name[BPF_OBJ_NAME_LEN];
 	__u32 ifindex;
 	__u32 gpl_compatible:1;
+	__u32 :31; /* alignment pad */
 	__u64 netns_dev;
 	__u64 netns_ino;
 	__u32 nr_jited_ksyms;
-- 
2.20.1

[PATCH AUTOSEL 5.2 210/249] netfilter: Fix remainder of pseudo-header protocol 0

[Sasha Levin]

From: He Zhe <zhe.he@windriver.com>

[ Upstream commit 5d1549847c76b1ffcf8e388ef4d0f229bdd1d7e8 ]

Since v5.1-rc1, some types of packets do not get unreachable reply with the
following iptables setting. Fox example,

$ iptables -A INPUT -p icmp --icmp-type 8 -j REJECT
$ ping 127.0.0.1 -c 1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
— 127.0.0.1 ping statistics —
1 packets transmitted, 0 received, 100% packet loss, time 0ms

We should have got the following reply from command line, but we did not.
From 127.0.0.1 icmp_seq=1 Destination Port Unreachable

Yi Zhao reported it and narrowed it down to:
7fc38225363d ("netfilter: reject: skip csum verification for protocols that don't support it"),

This is because nf_ip_checksum still expects pseudo-header protocol type 0 for
packets that are of neither TCP or UDP, and thus ICMP packets are mistakenly
treated as TCP/UDP.

This patch corrects the conditions in nf_ip_checksum and all other places that
still call it with protocol 0.

Fixes: 7fc38225363d ("netfilter: reject: skip csum verification for protocols that don't support it")
Reported-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_icmp.c | 2 +-
 net/netfilter/nf_nat_proto.c            | 2 +-
 net/netfilter/utils.c                   | 5 +++--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_icmp.c b/net/netfilter/nf_conntrack_proto_icmp.c
index a824367ed518..dd53e2b20f6b 100644
--- a/net/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/netfilter/nf_conntrack_proto_icmp.c
@@ -218,7 +218,7 @@ int nf_conntrack_icmpv4_error(struct nf_conn *tmpl,
 	/* See ip_conntrack_proto_tcp.c */
 	if (state->net->ct.sysctl_checksum &&
 	    state->hook == NF_INET_PRE_ROUTING &&
-	    nf_ip_checksum(skb, state->hook, dataoff, 0)) {
+	    nf_ip_checksum(skb, state->hook, dataoff, IPPROTO_ICMP)) {
 		icmp_error_log(skb, state, "bad hw icmp checksum");
 		return -NF_ACCEPT;
 	}
diff --git a/net/netfilter/nf_nat_proto.c b/net/netfilter/nf_nat_proto.c
index 07da07788f6b..83a24cc5753b 100644
--- a/net/netfilter/nf_nat_proto.c
+++ b/net/netfilter/nf_nat_proto.c
@@ -564,7 +564,7 @@ int nf_nat_icmp_reply_translation(struct sk_buff *skb,
 
 	if (!skb_make_writable(skb, hdrlen + sizeof(*inside)))
 		return 0;
-	if (nf_ip_checksum(skb, hooknum, hdrlen, 0))
+	if (nf_ip_checksum(skb, hooknum, hdrlen, IPPROTO_ICMP))
 		return 0;
 
 	inside = (void *)skb->data + hdrlen;
diff --git a/net/netfilter/utils.c b/net/netfilter/utils.c
index 06dc55590441..51b454d8fa9c 100644
--- a/net/netfilter/utils.c
+++ b/net/netfilter/utils.c
@@ -17,7 +17,8 @@ __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 	case CHECKSUM_COMPLETE:
 		if (hook != NF_INET_PRE_ROUTING && hook != NF_INET_LOCAL_IN)
 			break;
-		if ((protocol == 0 && !csum_fold(skb->csum)) ||
+		if ((protocol != IPPROTO_TCP && protocol != IPPROTO_UDP &&
+		    !csum_fold(skb->csum)) ||
 		    !csum_tcpudp_magic(iph->saddr, iph->daddr,
 				       skb->len - dataoff, protocol,
 				       skb->csum)) {
@@ -26,7 +27,7 @@ __sum16 nf_ip_checksum(struct sk_buff *skb, unsigned int hook,
 		}
 		/* fall through */
 	case CHECKSUM_NONE:
-		if (protocol == 0)
+		if (protocol != IPPROTO_TCP && protocol != IPPROTO_UDP)
 			skb->csum = 0;
 		else
 			skb->csum = csum_tcpudp_nofold(iph->saddr, iph->daddr,
-- 
2.20.1

[PATCH AUTOSEL 5.2 211/249] iwlwifi: dbg: fix debug monitor stop and restart delays

[Sasha Levin]

From: Shahar S Matityahu <shahar.s.matityahu@intel.com>

[ Upstream commit fc838c775f35e272e5cc7ef43853f0b55babbe37 ]

The driver should delay only in recording stop flow between writing to
DBGC_IN_SAMPLE register and DBGC_OUT_CTRL register. Any other delay is
not needed.

Change the following:
1. Remove any unnecessary delays in the flow
2. Increase the delay in the stop recording flow since 100 micro is
   not enough
3. Use usleep_range instead of delay since the driver is allowed to
   sleep in this flow.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Fixes: 5cfe79c8d92a ("iwlwifi: fw: stop and start debugging using host command")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 2 --
 drivers/net/wireless/intel/iwlwifi/fw/dbg.h | 6 ++++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index 33d7bc5500db..c875e173771c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -2303,8 +2303,6 @@ void iwl_fw_dbg_collect_sync(struct iwl_fw_runtime *fwrt)
 	/* start recording again if the firmware is not crashed */
 	if (!test_bit(STATUS_FW_ERROR, &fwrt->trans->status) &&
 	    fwrt->fw->dbg.dest_tlv) {
-		/* wait before we collect the data till the DBGC stop */
-		udelay(500);
 		iwl_fw_dbg_restart_recording(fwrt, &params);
 	}
 }
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
index fd0ad220e961..c5c015a66106 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h
@@ -294,7 +294,10 @@ _iwl_fw_dbg_stop_recording(struct iwl_trans *trans,
 	}
 
 	iwl_write_umac_prph(trans, DBGC_IN_SAMPLE, 0);
-	udelay(100);
+	/* wait for the DBGC to finish writing the internal buffer to DRAM to
+	 * avoid halting the HW while writing
+	 */
+	usleep_range(700, 1000);
 	iwl_write_umac_prph(trans, DBGC_OUT_CTRL, 0);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 	trans->dbg_rec_on = false;
@@ -324,7 +327,6 @@ _iwl_fw_dbg_restart_recording(struct iwl_trans *trans,
 		iwl_set_bits_prph(trans, MON_BUFF_SAMPLE_CTL, 0x1);
 	} else {
 		iwl_write_umac_prph(trans, DBGC_IN_SAMPLE, params->in_sample);
-		udelay(100);
 		iwl_write_umac_prph(trans, DBGC_OUT_CTRL, params->out_ctrl);
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 212/249] bnxt_en: Disable bus master during PCI shutdown and driver unload.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit c20dc142dd7b2884b8570eeab323bcd4a84294fa ]

Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed.  In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot.  DMA memory request in
D3hot state will generate PCI fatal error.  Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.

Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index f758b2e0591f..b9bc829aa9da 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10262,10 +10262,10 @@ static void bnxt_remove_one(struct pci_dev *pdev)
 	bnxt_dcb_free(bp);
 	kfree(bp->edev);
 	bp->edev = NULL;
+	bnxt_cleanup_pci(bp);
 	bnxt_free_ctx_mem(bp);
 	kfree(bp->ctx);
 	bp->ctx = NULL;
-	bnxt_cleanup_pci(bp);
 	bnxt_free_port_stats(bp);
 	free_netdev(dev);
 }
@@ -10859,6 +10859,7 @@ static void bnxt_shutdown(struct pci_dev *pdev)
 
 	if (system_state == SYSTEM_POWER_OFF) {
 		bnxt_clear_int_mode(bp);
+		pci_disable_device(pdev);
 		pci_wake_from_d3(pdev, bp->wol);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.2 213/249] bnxt_en: Fix statistics context reservation logic for RDMA driver.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit d77b1ad8e87dc5a6cd0d9158b097a4817946ca3b ]

The current logic assumes that the RDMA driver uses one statistics
context adjacent to the ones used by the network driver.  This
assumption is not true and the statistics context used by the
RDMA driver is tied to its MSIX base vector.  This wrong assumption
can cause RDMA driver failure after changing ethtool rings on the
network side.  Fix the statistics reservation logic accordingly.

Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b9bc829aa9da..9090c79387c1 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -5508,7 +5508,16 @@ static int bnxt_cp_rings_in_use(struct bnxt *bp)
 
 static int bnxt_get_func_stat_ctxs(struct bnxt *bp)
 {
-	return bp->cp_nr_rings + bnxt_get_ulp_stat_ctxs(bp);
+	int ulp_stat = bnxt_get_ulp_stat_ctxs(bp);
+	int cp = bp->cp_nr_rings;
+
+	if (!ulp_stat)
+		return cp;
+
+	if (bnxt_nq_rings_in_use(bp) > cp + bnxt_get_ulp_msix_num(bp))
+		return bnxt_get_ulp_msix_base(bp) + ulp_stat;
+
+	return cp + ulp_stat;
 }
 
 static bool bnxt_need_reserve_rings(struct bnxt *bp)
@@ -7477,11 +7486,7 @@ unsigned int bnxt_get_avail_cp_rings_for_en(struct bnxt *bp)
 
 unsigned int bnxt_get_avail_stat_ctxs_for_en(struct bnxt *bp)
 {
-	unsigned int stat;
-
-	stat = bnxt_get_max_func_stat_ctxs(bp) - bnxt_get_ulp_stat_ctxs(bp);
-	stat -= bp->cp_nr_rings;
-	return stat;
+	return bnxt_get_max_func_stat_ctxs(bp) - bnxt_get_func_stat_ctxs(bp);
 }
 
 int bnxt_get_avail_msix(struct bnxt *bp, int num)
-- 
2.20.1

[PATCH AUTOSEL 5.2 214/249] bnxt_en: Cap the returned MSIX vectors to the RDMA driver.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 1dbc59fa4bbaa108b641cd65a54f662b75e4ed36 ]

In an earlier commit to improve NQ reservations on 57500 chips, we
set the resv_irqs on the 57500 VFs to the fixed value assigned by
the PF regardless of how many are actually used.  The current
code assumes that resv_irqs minus the ones used by the network driver
must be the ones for the RDMA driver.  This is no longer true and
we may return more MSIX vectors than requested, causing inconsistency.
Fix it by capping the value.

Fixes: 01989c6b69d9 ("bnxt_en: Improve NQ reservations.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
index bfa342a98d08..fc77caf0a076 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c
@@ -157,8 +157,10 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id,
 
 	if (BNXT_NEW_RM(bp)) {
 		struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+		int resv_msix;
 
-		avail_msix = hw_resc->resv_irqs - bp->cp_nr_rings;
+		resv_msix = hw_resc->resv_irqs - bp->cp_nr_rings;
+		avail_msix = min_t(int, resv_msix, avail_msix);
 		edev->ulp_tbl[ulp_id].msix_requested = avail_msix;
 	}
 	bnxt_fill_msix_vecs(bp, ent);
-- 
2.20.1

[PATCH AUTOSEL 5.2 215/249] ALSA: hda: Fix a headphone detection issue when using SOF

[Sasha Levin]

From: Rander Wang <rander.wang@linux.intel.com>

[ Upstream commit 7c2b3629d09ddec810dc4c1d3a6657c32def8f71 ]

To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put
to disable CORB/RIRB buffers DMA if there is no user of bus and invokes
snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used.
Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by
snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io
called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited
responses is disabled and headphone can't be detected by hda codecs.

Now unsolicited responses is only enabled in snd_hdac_bus_reset_link
which resets controller. The function is only called for setup of
controller. This patch enables Unsolicited responses after RIRB is
initialized in snd_hdac_bus_init_cmd_io which works together with
snd_hdac_bus_reset_link to set up controller.

Tested legacy hda driver and SOF driver on intel whiskeylake.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/hda/hdac_controller.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index b02f74528b66..812dc144fb5b 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -79,6 +79,8 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
 	snd_hdac_chip_writew(bus, RINTCNT, 1);
 	/* enable rirb dma and response irq */
 	snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
+	/* Accept unsolicited responses */
+	snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, AZX_GCTL_UNSOL);
 	spin_unlock_irq(&bus->reg_lock);
 }
 EXPORT_SYMBOL_GPL(snd_hdac_bus_init_cmd_io);
@@ -415,9 +417,6 @@ int snd_hdac_bus_reset_link(struct hdac_bus *bus, bool full_reset)
 		return -EBUSY;
 	}
 
-	/* Accept unsolicited responses */
-	snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, AZX_GCTL_UNSOL);
-
 	/* detect codecs */
 	if (!bus->codec_mask) {
 		bus->codec_mask = snd_hdac_chip_readw(bus, STATESTS);
-- 
2.20.1

[PATCH AUTOSEL 5.2 216/249] perf stat: Make metric event lookup more robust

[Sasha Levin]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 145c407c808352acd625be793396fd4f33c794f8 ]

After setting up metric groups through the event parser, the metricgroup
code looks them up again in the event list.

Make sure we only look up events that haven't been used by some other
metric. The data structures currently cannot handle more than one metric
per event. This avoids problems with multiple events partially
overlapping.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lkml.kernel.org/r/20190624193711.35241-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-shadow.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index 83d8094be4fe..e545e2a8ae71 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -303,7 +303,7 @@ static struct perf_evsel *perf_stat__find_event(struct perf_evlist *evsel_list,
 	struct perf_evsel *c2;
 
 	evlist__for_each_entry (evsel_list, c2) {
-		if (!strcasecmp(c2->name, name))
+		if (!strcasecmp(c2->name, name) && !c2->collect_stat)
 			return c2;
 	}
 	return NULL;
@@ -342,7 +342,8 @@ void perf_stat__collect_metric_expr(struct perf_evlist *evsel_list)
 			if (leader) {
 				/* Search in group */
 				for_each_group_member (oc, leader) {
-					if (!strcasecmp(oc->name, metric_names[i])) {
+					if (!strcasecmp(oc->name, metric_names[i]) &&
+						!oc->collect_stat) {
 						found = true;
 						break;
 					}
-- 
2.20.1

[PATCH AUTOSEL 5.2 217/249] perf stat: Fix metrics with --no-merge

[Sasha Levin]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit e3a9427323a53ceee540276a74af7706f350d052 ]

Since Fixes: 8c5421c016a4 ("perf pmu: Display pmu name when printing
unmerged events in stat") using --no-merge adds the PMU name to the
evsel name.

This breaks the metric value lookup because the parser doesn't know
about this.

Remove the extra postfixes for the metric evaluation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 8c5421c016a4 ("perf pmu: Display pmu name when printing unmerged events in stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-shadow.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c
index e545e2a8ae71..0ef98e991ade 100644
--- a/tools/perf/util/stat-shadow.c
+++ b/tools/perf/util/stat-shadow.c
@@ -723,6 +723,7 @@ static void generic_metric(struct perf_stat_config *config,
 	double ratio;
 	int i;
 	void *ctxp = out->ctx;
+	char *n, *pn;
 
 	expr__ctx_init(&pctx);
 	expr__add_id(&pctx, name, avg);
@@ -742,7 +743,19 @@ static void generic_metric(struct perf_stat_config *config,
 			stats = &v->stats;
 			scale = 1.0;
 		}
-		expr__add_id(&pctx, metric_events[i]->name, avg_stats(stats)*scale);
+
+		n = strdup(metric_events[i]->name);
+		if (!n)
+			return;
+		/*
+		 * This display code with --no-merge adds [cpu] postfixes.
+		 * These are not supported by the parser. Remove everything
+		 * after the space.
+		 */
+		pn = strchr(n, ' ');
+		if (pn)
+			*pn = 0;
+		expr__add_id(&pctx, n, avg_stats(stats)*scale);
 	}
 	if (!metric_events[i]) {
 		const char *p = metric_expr;
@@ -759,6 +772,9 @@ static void generic_metric(struct perf_stat_config *config,
 				     (metric_name ? metric_name : name) : "", 0);
 	} else
 		print_metric(config, ctxp, NULL, NULL, "", 0);
+
+	for (i = 1; i < pctx.num_ids; i++)
+		free((void *)pctx.ids[i].name);
 }
 
 void perf_stat__print_shadow_stats(struct perf_stat_config *config,
-- 
2.20.1

[PATCH AUTOSEL 5.2 218/249] perf stat: Don't merge events in the same PMU

[Sasha Levin]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 6c5f4e5cb35b4694dc035d91092d23f596ecd06a ]

Event merging is mainly to collapse similar events in lots of different
duplicated PMUs.

It can break metric displaying. It's possible for two metrics to have
the same event, and when the two events happen in a row the second
wouldn't be displayed.  This would also not show the second metric.

To avoid this don't merge events in the same PMU. This makes sense, if
we have multiple events in the same PMU there is likely some reason for
it (e.g. using multiple groups) and we better not merge them.

While in theory it would be possible to construct metrics that have
events with the same name in different PMU no current metrics have this
problem.

This is the fix for perf stat -M UPI,IPC (needs also another bug fix to
completely work)

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: 430daf2dc7af ("perf stat: Collapse identically named events")
Link: http://lkml.kernel.org/r/20190624193711.35241-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/stat-display.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/stat-display.c b/tools/perf/util/stat-display.c
index 4c53bae5644b..94bed4031def 100644
--- a/tools/perf/util/stat-display.c
+++ b/tools/perf/util/stat-display.c
@@ -542,7 +542,8 @@ static void collect_all_aliases(struct perf_stat_config *config, struct perf_evs
 		    alias->scale != counter->scale ||
 		    alias->cgrp != counter->cgrp ||
 		    strcmp(alias->unit, counter->unit) ||
-		    perf_evsel__is_clock(alias) != perf_evsel__is_clock(counter))
+		    perf_evsel__is_clock(alias) != perf_evsel__is_clock(counter) ||
+		    !strcmp(alias->pmu_name, counter->pmu_name))
 			break;
 		alias->merged_stat = true;
 		cb(config, alias, data, false);
-- 
2.20.1

[PATCH AUTOSEL 5.2 219/249] perf stat: Fix group lookup for metric group

[Sasha Levin]

From: Andi Kleen <ak@linux.intel.com>

[ Upstream commit 2f87f33f4226523df9c9cc28f9874ea02fcc3d3f ]

The metric group code tries to find a group it added earlier in the
evlist. Fix the lookup to handle groups with partially overlaps
correctly. When a sub string match fails and we reset the match, we have
to compare the first element again.

I also renamed the find_evsel function to find_evsel_group to make its
purpose clearer.

With the earlier changes this fixes:

Before:

  % perf stat -M UPI,IPC sleep 1
  ...
         1,032,922      uops_retired.retire_slots #      1.1 UPI
         1,896,096      inst_retired.any
         1,896,096      inst_retired.any
         1,177,254      cpu_clk_unhalted.thread

After:

  % perf stat -M UPI,IPC sleep 1
  ...
        1,013,193      uops_retired.retire_slots #      1.1 UPI
           932,033      inst_retired.any
           932,033      inst_retired.any          #      0.9 IPC
         1,091,245      cpu_clk_unhalted.thread

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Fixes: b18f3e365019 ("perf stat: Support JSON metrics in perf stat")
Link: http://lkml.kernel.org/r/20190624193711.35241-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/metricgroup.c | 47 ++++++++++++++++++++++++++---------
 1 file changed, 35 insertions(+), 12 deletions(-)

diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index 699e020737d9..fabdb6dde88e 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -85,26 +85,49 @@ struct egroup {
 	const char *metric_expr;
 };
 
-static struct perf_evsel *find_evsel(struct perf_evlist *perf_evlist,
-				     const char **ids,
-				     int idnum,
-				     struct perf_evsel **metric_events)
+static bool record_evsel(int *ind, struct perf_evsel **start,
+			 int idnum,
+			 struct perf_evsel **metric_events,
+			 struct perf_evsel *ev)
+{
+	metric_events[*ind] = ev;
+	if (*ind == 0)
+		*start = ev;
+	if (++*ind == idnum) {
+		metric_events[*ind] = NULL;
+		return true;
+	}
+	return false;
+}
+
+static struct perf_evsel *find_evsel_group(struct perf_evlist *perf_evlist,
+					   const char **ids,
+					   int idnum,
+					   struct perf_evsel **metric_events)
 {
 	struct perf_evsel *ev, *start = NULL;
 	int ind = 0;
 
 	evlist__for_each_entry (perf_evlist, ev) {
+		if (ev->collect_stat)
+			continue;
 		if (!strcmp(ev->name, ids[ind])) {
-			metric_events[ind] = ev;
-			if (ind == 0)
-				start = ev;
-			if (++ind == idnum) {
-				metric_events[ind] = NULL;
+			if (record_evsel(&ind, &start, idnum,
+					 metric_events, ev))
 				return start;
-			}
 		} else {
+			/*
+			 * We saw some other event that is not
+			 * in our list of events. Discard
+			 * the whole match and start again.
+			 */
 			ind = 0;
 			start = NULL;
+			if (!strcmp(ev->name, ids[ind])) {
+				if (record_evsel(&ind, &start, idnum,
+						 metric_events, ev))
+					return start;
+			}
 		}
 	}
 	/*
@@ -134,8 +157,8 @@ static int metricgroup__setup_events(struct list_head *groups,
 			ret = -ENOMEM;
 			break;
 		}
-		evsel = find_evsel(perf_evlist, eg->ids, eg->idnum,
-				   metric_events);
+		evsel = find_evsel_group(perf_evlist, eg->ids, eg->idnum,
+					 metric_events);
 		if (!evsel) {
 			pr_debug("Cannot resolve %s: %s\n",
 					eg->metric_name, eg->metric_expr);
-- 
2.20.1

[PATCH AUTOSEL 5.2 220/249] vxlan: do not destroy fdb if register_netdevice() is failed

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 7c31e54aeee517d1318dfc0bde9fa7de75893dc6 ]

__vxlan_dev_create() destroys FDB using specific pointer which indicates
a fdb when error occurs.
But that pointer should not be used when register_netdevice() fails because
register_netdevice() internally destroys fdb when error occurs.

This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev
internally.
Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan
dev.

vxlan_fdb_insert() is called after calling register_netdevice().
This routine can avoid situation that ->ndo_uninit() destroys fdb entry
in error path of register_netdevice().
Hence, error path of __vxlan_dev_create() routine can have an opportunity
to destroy default fdb entry by hand.

Test command
    ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \
	    dev enp0s9 dstport 4789

Splat looks like:
[  213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256
[  213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan]
[  213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d
[  213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202
[  213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000
[  213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0
[  213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000
[  213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200
[  213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0
[  213.402178] FS:  00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000
[  213.402178] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0
[  213.402178] Call Trace:
[  213.402178]  __vxlan_dev_create+0x3a9/0x7d0 [vxlan]
[  213.402178]  ? vxlan_changelink+0x740/0x740 [vxlan]
[  213.402178]  ? rcu_read_unlock+0x60/0x60 [vxlan]
[  213.402178]  ? __kasan_kmalloc.constprop.3+0xa0/0xd0
[  213.402178]  vxlan_newlink+0x8d/0xc0 [vxlan]
[  213.402178]  ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan]
[  213.554119]  ? __netlink_ns_capable+0xc3/0xf0
[  213.554119]  __rtnl_newlink+0xb75/0x1180
[  213.554119]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vxlan.c | 37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 083f3f0bf37f..b4283f52a09d 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -804,6 +804,14 @@ static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan,
 	return f;
 }
 
+static void vxlan_fdb_insert(struct vxlan_dev *vxlan, const u8 *mac,
+			     __be32 src_vni, struct vxlan_fdb *f)
+{
+	++vxlan->addrcnt;
+	hlist_add_head_rcu(&f->hlist,
+			   vxlan_fdb_head(vxlan, mac, src_vni));
+}
+
 static int vxlan_fdb_create(struct vxlan_dev *vxlan,
 			    const u8 *mac, union vxlan_addr *ip,
 			    __u16 state, __be16 port, __be32 src_vni,
@@ -829,18 +837,13 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan,
 		return rc;
 	}
 
-	++vxlan->addrcnt;
-	hlist_add_head_rcu(&f->hlist,
-			   vxlan_fdb_head(vxlan, mac, src_vni));
-
 	*fdb = f;
 
 	return 0;
 }
 
-static void vxlan_fdb_free(struct rcu_head *head)
+static void __vxlan_fdb_free(struct vxlan_fdb *f)
 {
-	struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
 	struct vxlan_rdst *rd, *nd;
 
 	list_for_each_entry_safe(rd, nd, &f->remotes, list) {
@@ -850,6 +853,13 @@ static void vxlan_fdb_free(struct rcu_head *head)
 	kfree(f);
 }
 
+static void vxlan_fdb_free(struct rcu_head *head)
+{
+	struct vxlan_fdb *f = container_of(head, struct vxlan_fdb, rcu);
+
+	__vxlan_fdb_free(f);
+}
+
 static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f,
 			      bool do_notify, bool swdev_notify)
 {
@@ -977,6 +987,7 @@ static int vxlan_fdb_update_create(struct vxlan_dev *vxlan,
 	if (rc < 0)
 		return rc;
 
+	vxlan_fdb_insert(vxlan, mac, src_vni, f);
 	rc = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH,
 			      swdev_notify, extack);
 	if (rc)
@@ -3571,12 +3582,17 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	if (err)
 		goto errout;
 
-	/* notify default fdb entry */
 	if (f) {
+		vxlan_fdb_insert(vxlan, all_zeros_mac,
+				 vxlan->default_dst.remote_vni, f);
+
+		/* notify default fdb entry */
 		err = vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f),
 				       RTM_NEWNEIGH, true, extack);
-		if (err)
-			goto errout;
+		if (err) {
+			vxlan_fdb_destroy(vxlan, f, false, false);
+			goto unregister;
+		}
 	}
 
 	list_add(&vxlan->next, &vn->vxlan_list);
@@ -3588,7 +3604,8 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev,
 	 * destroy the entry by hand here.
 	 */
 	if (f)
-		vxlan_fdb_destroy(vxlan, f, false, false);
+		__vxlan_fdb_free(f);
+unregister:
 	if (unregister)
 		unregister_netdevice(dev);
 	return err;
-- 
2.20.1

[PATCH AUTOSEL 5.2 221/249] bnx2x: Prevent ptp_task to be rescheduled indefinitely

[Sasha Levin]

From: "Guilherme G. Piccoli" <gpiccoli@canonical.com>

[ Upstream commit 3c91f25c2f72ba6001775a5932857c1d2131c531 ]

Currently bnx2x ptp worker tries to read a register with timestamp
information in case of TX packet timestamping and in case it fails,
the routine reschedules itself indefinitely. This was reported as a
kworker always at 100% of CPU usage, which was narrowed down to be
bnx2x ptp_task.

By following the ioctl handler, we could narrow down the problem to
an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with
RX filter zeroed; this isn't reproducible for example with ptp4l
(from linuxptp) since this tool requests a supported RX filter.
It seems NIC FW timestamp mechanism cannot work well with
RX_FILTER_NONE - driver's PTP filter init routine skips a register
write to the adapter if there's not a supported filter request.

This patch addresses the problem of bnx2x ptp thread's everlasting
reschedule by retrying the register read 10 times; between the read
attempts the thread sleeps for an increasing amount of time starting
in 1ms to give FW some time to perform the timestamping. If it still
fails after all retries, we bail out in order to prevent an unbound
resource consumption from bnx2x.

The patch also adds an ethtool statistic for accounting the skipped
TX timestamp packets and it reduces the priority of timestamping
error messages to prevent log flooding. The code was tested using
both linuxptp and chrony.

Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com>
Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   |  5 ++-
 .../ethernet/broadcom/bnx2x/bnx2x_ethtool.c   |  4 ++-
 .../net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 33 ++++++++++++++-----
 .../net/ethernet/broadcom/bnx2x/bnx2x_stats.h |  3 ++
 4 files changed, 34 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 008ad0ca89ba..c12c1bab0fe4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -3857,9 +3857,12 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
 		if (!(bp->flags & TX_TIMESTAMPING_EN)) {
+			bp->eth_stats.ptp_skip_tx_ts++;
 			BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");
 		} else if (bp->ptp_tx_skb) {
-			BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n");
+			bp->eth_stats.ptp_skip_tx_ts++;
+			netdev_err_once(bp->dev,
+					"Device supports only a single outstanding packet to timestamp, this packet won't be timestamped\n");
 		} else {
 			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 			/* schedule check for Tx timestamp */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 51fc845de31a..4a0ba6801c9e 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -182,7 +182,9 @@ static const struct {
 	{ STATS_OFFSET32(driver_filtered_tx_pkt),
 				4, false, "driver_filtered_tx_pkt" },
 	{ STATS_OFFSET32(eee_tx_lpi),
-				4, true, "Tx LPI entry count"}
+				4, true, "Tx LPI entry count"},
+	{ STATS_OFFSET32(ptp_skip_tx_ts),
+				4, false, "ptp_skipped_tx_tstamp" },
 };
 
 #define BNX2X_NUM_STATS		ARRAY_SIZE(bnx2x_stats_arr)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 03ac10b1cd1e..2cc14db8f0ec 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -15214,11 +15214,24 @@ static void bnx2x_ptp_task(struct work_struct *work)
 	u32 val_seq;
 	u64 timestamp, ns;
 	struct skb_shared_hwtstamps shhwtstamps;
+	bool bail = true;
+	int i;
+
+	/* FW may take a while to complete timestamping; try a bit and if it's
+	 * still not complete, may indicate an error state - bail out then.
+	 */
+	for (i = 0; i < 10; i++) {
+		/* Read Tx timestamp registers */
+		val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
+				 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
+		if (val_seq & 0x10000) {
+			bail = false;
+			break;
+		}
+		msleep(1 << i);
+	}
 
-	/* Read Tx timestamp registers */
-	val_seq = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_SEQID :
-			 NIG_REG_P0_TLLH_PTP_BUF_SEQID);
-	if (val_seq & 0x10000) {
+	if (!bail) {
 		/* There is a valid timestamp value */
 		timestamp = REG_RD(bp, port ? NIG_REG_P1_TLLH_PTP_BUF_TS_MSB :
 				   NIG_REG_P0_TLLH_PTP_BUF_TS_MSB);
@@ -15233,16 +15246,18 @@ static void bnx2x_ptp_task(struct work_struct *work)
 		memset(&shhwtstamps, 0, sizeof(shhwtstamps));
 		shhwtstamps.hwtstamp = ns_to_ktime(ns);
 		skb_tstamp_tx(bp->ptp_tx_skb, &shhwtstamps);
-		dev_kfree_skb_any(bp->ptp_tx_skb);
-		bp->ptp_tx_skb = NULL;
 
 		DP(BNX2X_MSG_PTP, "Tx timestamp, timestamp cycles = %llu, ns = %llu\n",
 		   timestamp, ns);
 	} else {
-		DP(BNX2X_MSG_PTP, "There is no valid Tx timestamp yet\n");
-		/* Reschedule to keep checking for a valid timestamp value */
-		schedule_work(&bp->ptp_task);
+		DP(BNX2X_MSG_PTP,
+		   "Tx timestamp is not recorded (register read=%u)\n",
+		   val_seq);
+		bp->eth_stats.ptp_skip_tx_ts++;
 	}
+
+	dev_kfree_skb_any(bp->ptp_tx_skb);
+	bp->ptp_tx_skb = NULL;
 }
 
 void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
index b2644ed13d06..d55e63692cf3 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h
@@ -207,6 +207,9 @@ struct bnx2x_eth_stats {
 	u32 driver_filtered_tx_pkt;
 	/* src: Clear-on-Read register; Will not survive PMF Migration */
 	u32 eee_tx_lpi;
+
+	/* PTP */
+	u32 ptp_skip_tx_ts;
 };
 
 struct bnx2x_eth_q_stats {
-- 
2.20.1

[PATCH AUTOSEL 5.2 222/249] net: usb: asix: init MAC address buffers

[Sasha Levin]

From: Phong Tran <tranmanphong@gmail.com>

[ Upstream commit 78226f6eaac80bf30256a33a4926c194ceefdf36 ]

This is for fixing bug KMSAN: uninit-value in ax88772_bind

Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ

Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com

syzbot found the following crash on:

HEAD commit:    f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree:       kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler:       clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000

==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x191/0x1f0 lib/dump_stack.c:113
  kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
  __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
  is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
  asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
  ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
  usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
  usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
  generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
  usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
  hub_port_connect drivers/usb/core/hub.c:5089 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
  port_event drivers/usb/core/hub.c:5350 [inline]
  hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
  process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
  kthread+0x4b5/0x4f0 kernel/kthread.c:254
  ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/asix_devices.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index c9bc96310ed4..ef548beba684 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -226,7 +226,7 @@ static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
-	u8 buf[ETH_ALEN];
+	u8 buf[ETH_ALEN] = {0};
 	int i;
 	unsigned long gpio_bits = dev->driver_info->data;
 
@@ -677,7 +677,7 @@ static int asix_resume(struct usb_interface *intf)
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret, i;
-	u8 buf[ETH_ALEN], chipcode = 0;
+	u8 buf[ETH_ALEN] = {0}, chipcode = 0;
 	u32 phyid;
 	struct asix_common_private *priv;
 
@@ -1061,7 +1061,7 @@ static const struct net_device_ops ax88178_netdev_ops = {
 static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret;
-	u8 buf[ETH_ALEN];
+	u8 buf[ETH_ALEN] = {0};
 
 	usbnet_get_endpoints(dev,intf);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 223/249] rxrpc: Fix oops in tracepoint

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 99f0eae653b2db64917d0b58099eb51e300b311d ]

If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the
trace line that rxrpc_extract_header() tries to emit when a protocol error
occurs (typically because the packet is short) because the call argument is
NULL.

Fix this by using ?: to assume 0 as the debug_id if call is NULL.

This can then be induced by:

	echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001

where addr has the following program running on it:

	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <unistd.h>
	#include <sys/socket.h>
	#include <arpa/inet.h>
	#include <linux/rxrpc.h>
	int main(void)
	{
		struct sockaddr_rxrpc srx;
		int fd;
		memset(&srx, 0, sizeof(srx));
		srx.srx_family			= AF_RXRPC;
		srx.srx_service			= 0;
		srx.transport_type		= AF_INET;
		srx.transport_len		= sizeof(srx.transport.sin);
		srx.transport.sin.sin_family	= AF_INET;
		srx.transport.sin.sin_port	= htons(0x4e21);
		fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6);
		bind(fd, (struct sockaddr *)&srx, sizeof(srx));
		sleep(20);
		return 0;
	}

It results in the following oops.

	BUG: kernel NULL pointer dereference, address: 0000000000000340
	#PF: supervisor read access in kernel mode
	#PF: error_code(0x0000) - not-present page
	...
	RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac
	...
	Call Trace:
	 <IRQ>
	 rxrpc_extract_header+0x86/0x171
	 ? rcu_read_lock_sched_held+0x5d/0x63
	 ? rxrpc_new_skb+0xd4/0x109
	 rxrpc_input_packet+0xef/0x14fc
	 ? rxrpc_input_data+0x986/0x986
	 udp_queue_rcv_one_skb+0xbf/0x3d0
	 udp_unicast_rcv_skb.isra.8+0x64/0x71
	 ip_protocol_deliver_rcu+0xe4/0x1b4
	 ip_local_deliver+0xf0/0x154
	 __netif_receive_skb_one_core+0x50/0x6c
	 netif_receive_skb_internal+0x26b/0x2e9
	 napi_gro_receive+0xf8/0x1da
	 rtl8169_poll+0x303/0x4c4
	 net_rx_action+0x10e/0x333
	 __do_softirq+0x1a5/0x38f
	 irq_exit+0x54/0xc4
	 do_IRQ+0xda/0xf8
	 common_interrupt+0xf/0xf
	 </IRQ>
	 ...
	 ? cpuidle_enter_state+0x23c/0x34d
	 cpuidle_enter+0x2a/0x36
	 do_idle+0x163/0x1ea
	 cpu_startup_entry+0x1d/0x1f
	 start_secondary+0x157/0x172
	 secondary_startup_64+0xa4/0xb0

Fixes: a25e21f0bcd2 ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/rxrpc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h
index d85816878a52..cc1d060cbf13 100644
--- a/include/trace/events/rxrpc.h
+++ b/include/trace/events/rxrpc.h
@@ -1379,7 +1379,7 @@ TRACE_EVENT(rxrpc_rx_eproto,
 			     ),
 
 	    TP_fast_assign(
-		    __entry->call = call->debug_id;
+		    __entry->call = call ? call->debug_id : 0;
 		    __entry->serial = serial;
 		    __entry->why = why;
 			   ),
-- 
2.20.1

[PATCH AUTOSEL 5.2 224/249] libbpf: fix GCC8 warning for strncpy

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit cdfc7f888c2a355b01308e97c6df108f1c2b64e8 ]

GCC8 started emitting warning about using strncpy with number of bytes
exactly equal destination size, which is generally unsafe, as can lead
to non-zero terminated string being copied. Use IFNAMSIZ - 1 as number
of bytes to ensure name is always zero-terminated.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/xsk.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c
index 38667b62f1fe..8a7a05bc657d 100644
--- a/tools/lib/bpf/xsk.c
+++ b/tools/lib/bpf/xsk.c
@@ -337,7 +337,8 @@ static int xsk_get_max_queues(struct xsk_socket *xsk)
 
 	channels.cmd = ETHTOOL_GCHANNELS;
 	ifr.ifr_data = (void *)&channels;
-	strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ);
+	strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1);
+	ifr.ifr_name[IFNAMSIZ - 1] = '\0';
 	err = ioctl(fd, SIOCETHTOOL, &ifr);
 	if (err && errno != EOPNOTSUPP) {
 		ret = -errno;
-- 
2.20.1

[PATCH AUTOSEL 5.2 225/249] bpf, libbpf, smatch: Fix potential NULL pointer dereference

[Sasha Levin]

From: Leo Yan <leo.yan@linaro.org>

[ Upstream commit 33bae185f74d49a0d7b1bfaafb8e959efce0f243 ]

Based on the following report from Smatch, fix the potential NULL
pointer dereference check:

  tools/lib/bpf/libbpf.c:3493
  bpf_prog_load_xattr() warn: variable dereferenced before check 'attr'
  (see line 3483)

  3479 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
  3480                         struct bpf_object **pobj, int *prog_fd)
  3481 {
  3482         struct bpf_object_open_attr open_attr = {
  3483                 .file           = attr->file,
  3484                 .prog_type      = attr->prog_type,
                                         ^^^^^^
  3485         };

At the head of function, it directly access 'attr' without checking
if it's NULL pointer. This patch moves the values assignment after
validating 'attr' and 'attr->file'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 151f7ac1882e..3865a5d27251 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3487,10 +3487,7 @@ int bpf_prog_load(const char *file, enum bpf_prog_type type,
 int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
 			struct bpf_object **pobj, int *prog_fd)
 {
-	struct bpf_object_open_attr open_attr = {
-		.file		= attr->file,
-		.prog_type	= attr->prog_type,
-	};
+	struct bpf_object_open_attr open_attr = {};
 	struct bpf_program *prog, *first_prog = NULL;
 	enum bpf_attach_type expected_attach_type;
 	enum bpf_prog_type prog_type;
@@ -3503,6 +3500,9 @@ int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr,
 	if (!attr->file)
 		return -EINVAL;
 
+	open_attr.file = attr->file;
+	open_attr.prog_type = attr->prog_type;
+
 	obj = bpf_object__open_xattr(&open_attr);
 	if (IS_ERR_OR_NULL(obj))
 		return -ENOENT;
-- 
2.20.1

[PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

From: Jiri Benc <jbenc@redhat.com>

[ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]

Selftests are reporting this failure in test_lwt_seg6local.sh:

+ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o sec encap_srh dev veth2
Error fetching program/map!
Failed to parse eBPF program: Operation not permitted

The problem is __attribute__((always_inline)) alone is not enough to prevent
clang from inserting those functions in .text. In that case, .text is not
marked as relocateable.

See the output of objdump -h test_lwt_seg6local.o:

Idx Name          Size      VMA               LMA               File off  Algn
  0 .text         00003530  0000000000000000  0000000000000000  00000040  2**3
                  CONTENTS, ALLOC, LOAD, READONLY, CODE

This causes the iproute bpf loader to fail in bpf_fetch_prog_sec:
bpf_has_call_data returns true but bpf_fetch_prog_relo fails as there's no
relocateable .text section in the file.

To fix this, convert to 'static __always_inline'.

v2: Use 'static __always_inline' instead of 'static inline
    __attribute__((always_inline))'

Fixes: c99a84eac026 ("selftests/bpf: test for seg6local End.BPF action")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/bpf/progs/test_lwt_seg6local.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c b/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
index 0575751bc1bc..e2f6ed0a583d 100644
--- a/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
+++ b/tools/testing/selftests/bpf/progs/test_lwt_seg6local.c
@@ -61,7 +61,7 @@ struct sr6_tlv_t {
 	unsigned char value[0];
 } BPF_PACKET_HEADER;
 
-__attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
+static __always_inline struct ip6_srh_t *get_srh(struct __sk_buff *skb)
 {
 	void *cursor, *data_end;
 	struct ip6_srh_t *srh;
@@ -95,7 +95,7 @@ __attribute__((always_inline)) struct ip6_srh_t *get_srh(struct __sk_buff *skb)
 	return srh;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
 		   uint32_t old_pad, uint32_t pad_off)
 {
@@ -125,7 +125,7 @@ int update_tlv_pad(struct __sk_buff *skb, uint32_t new_pad,
 	return 0;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
 			  uint32_t *tlv_off, uint32_t *pad_size,
 			  uint32_t *pad_off)
@@ -184,7 +184,7 @@ int is_valid_tlv_boundary(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	return 0;
 }
 
-__attribute__((always_inline))
+static __always_inline
 int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
 	    struct sr6_tlv_t *itlv, uint8_t tlv_size)
 {
@@ -228,7 +228,7 @@ int add_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh, uint32_t tlv_off,
 	return update_tlv_pad(skb, new_pad, pad_size, pad_off);
 }
 
-__attribute__((always_inline))
+static __always_inline
 int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	       uint32_t tlv_off)
 {
@@ -266,7 +266,7 @@ int delete_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh,
 	return update_tlv_pad(skb, new_pad, pad_size, pad_off);
 }
 
-__attribute__((always_inline))
+static __always_inline
 int has_egr_tlv(struct __sk_buff *skb, struct ip6_srh_t *srh)
 {
 	int tlv_offset = sizeof(struct ip6_t) + sizeof(struct ip6_srh_t) +
-- 
2.20.1

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Mon, 15 Jul 2019 09:46:31 -0400, Sasha Levin wrote:
> From: Jiri Benc <jbenc@redhat.com>
> 
> [ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]
> 
> Selftests are reporting this failure in test_lwt_seg6local.sh:

I don't think this is critical in any way and I don't think this is a
stable material. How was this selected?

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

On Wed, Jul 17, 2019 at 11:43:34AM +0200, Jiri Benc wrote:
>On Mon, 15 Jul 2019 09:46:31 -0400, Sasha Levin wrote:
>> From: Jiri Benc <jbenc@redhat.com>
>>
>> [ Upstream commit 11aca65ec4db09527d3e9b6b41a0615b7da4386b ]
>>
>> Selftests are reporting this failure in test_lwt_seg6local.sh:
>
>I don't think this is critical in any way and I don't think this is a
>stable material. How was this selected?

It fixes a bug, right?

--
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
> It fixes a bug, right?

A bug in selftests. And quite likely, it probably happens only with
some compiler versions.

I don't think patches only touching tools/testing/selftests/ qualify
for stable in general. They don't affect the end users.

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[David Miller]

From: Jiri Benc <jbenc@redhat.com>
Date: Thu, 18 Jul 2019 09:36:54 +0200

> On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
>> It fixes a bug, right?
> 
> A bug in selftests. And quite likely, it probably happens only with
> some compiler versions.
> 
> I don't think patches only touching tools/testing/selftests/ qualify
> for stable in general. They don't affect the end users.

It has a significant impact on automated testing which lots of
individuals and entities perform, therefore I think it very much is
-stable material.

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Jiri Benc]

On Thu, 18 Jul 2019 11:55:34 -0700 (PDT), David Miller wrote:
> It has a significant impact on automated testing which lots of
> individuals and entities perform, therefore I think it very much is
> -stable material.

Okay.

Thanks,

 Jiri

Re: [PATCH AUTOSEL 5.2 226/249] selftests: bpf: fix inlines in test_lwt_seg6local

[Sasha Levin]

On Thu, Jul 18, 2019 at 09:36:54AM +0200, Jiri Benc wrote:
>On Wed, 17 Jul 2019 19:47:57 -0400, Sasha Levin wrote:
>> It fixes a bug, right?
>
>A bug in selftests. And quite likely, it probably happens only with
>some compiler versions.
>
>I don't think patches only touching tools/testing/selftests/ qualify
>for stable in general. They don't affect the end users.

I'd argue that a bug in your tests is just as (if not even more) worse
than a bug in the code.

--
Thanks,
Sasha

[PATCH AUTOSEL 5.2 227/249] bonding: validate ip header before check IPPROTO_IGMP

[Sasha Levin]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ]

bond_xmit_roundrobin() checks for IGMP packets but it parses
the IP header even before checking skb->protocol.

We should validate the IP header with pskb_may_pull() before
using iph->protocol.

Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com
Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode")
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/bonding/bond_main.c | 37 ++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 14 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 799fc38c5c34..b0aab3a0a1bf 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3866,8 +3866,8 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
 					struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
-	struct iphdr *iph = ip_hdr(skb);
 	struct slave *slave;
+	int slave_cnt;
 	u32 slave_id;
 
 	/* Start with the curr_active_slave that joined the bond as the
@@ -3876,23 +3876,32 @@ static netdev_tx_t bond_xmit_roundrobin(struct sk_buff *skb,
 	 * send the join/membership reports.  The curr_active_slave found
 	 * will send all of this type of traffic.
 	 */
-	if (iph->protocol == IPPROTO_IGMP && skb->protocol == htons(ETH_P_IP)) {
-		slave = rcu_dereference(bond->curr_active_slave);
-		if (slave)
-			bond_dev_queue_xmit(bond, skb, slave->dev);
-		else
-			bond_xmit_slave_id(bond, skb, 0);
-	} else {
-		int slave_cnt = READ_ONCE(bond->slave_cnt);
+	if (skb->protocol == htons(ETH_P_IP)) {
+		int noff = skb_network_offset(skb);
+		struct iphdr *iph;
 
-		if (likely(slave_cnt)) {
-			slave_id = bond_rr_gen_slave_id(bond);
-			bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
-		} else {
-			bond_tx_drop(bond_dev, skb);
+		if (unlikely(!pskb_may_pull(skb, noff + sizeof(*iph))))
+			goto non_igmp;
+
+		iph = ip_hdr(skb);
+		if (iph->protocol == IPPROTO_IGMP) {
+			slave = rcu_dereference(bond->curr_active_slave);
+			if (slave)
+				bond_dev_queue_xmit(bond, skb, slave->dev);
+			else
+				bond_xmit_slave_id(bond, skb, 0);
+			return NETDEV_TX_OK;
 		}
 	}
 
+non_igmp:
+	slave_cnt = READ_ONCE(bond->slave_cnt);
+	if (likely(slave_cnt)) {
+		slave_id = bond_rr_gen_slave_id(bond);
+		bond_xmit_slave_id(bond, skb, slave_id % slave_cnt);
+	} else {
+		bond_tx_drop(bond_dev, skb);
+	}
 	return NETDEV_TX_OK;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 228/249] gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3285170f28a850638794cdfe712eb6d93e51e706 ]

Commit 372e722ea4dd4ca1 ("gpiolib: use descriptors internally") renamed
the functions to use a "gpiod" prefix, and commit 79a9becda8940deb
("gpiolib: export descriptor-based GPIO interface") introduced the "raw"
variants, but both changes forgot to update the comments.

Readd a similar reference to gpiod_set_value(), which was accidentally
removed by commit 1e77fc82110ac36f ("gpio: Add missing open drain/source
handling to gpiod_set_value_cansleep()").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20190701142738.25219-1-geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index be1d1d2f8aaa..bb3104d2eb0c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3025,7 +3025,7 @@ int gpiod_get_array_value_complex(bool raw, bool can_sleep,
 int gpiod_get_raw_value(const struct gpio_desc *desc)
 {
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	return gpiod_get_raw_value_commit(desc);
 }
@@ -3046,7 +3046,7 @@ int gpiod_get_value(const struct gpio_desc *desc)
 	int value;
 
 	VALIDATE_DESC(desc);
-	/* Should be using gpio_get_value_cansleep() */
+	/* Should be using gpiod_get_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 
 	value = gpiod_get_raw_value_commit(desc);
@@ -3317,7 +3317,7 @@ int gpiod_set_array_value_complex(bool raw, bool can_sleep,
 void gpiod_set_raw_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
-	/* Should be using gpiod_set_value_cansleep() */
+	/* Should be using gpiod_set_raw_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_raw_value_commit(desc, value);
 }
@@ -3358,6 +3358,7 @@ static void gpiod_set_value_nocheck(struct gpio_desc *desc, int value)
 void gpiod_set_value(struct gpio_desc *desc, int value)
 {
 	VALIDATE_DESC_VOID(desc);
+	/* Should be using gpiod_set_value_cansleep() */
 	WARN_ON(desc->gdev->chip->can_sleep);
 	gpiod_set_value_nocheck(desc, value);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 229/249] iommu/arm-smmu-v3: Invalidate ATC when detaching a device

[Sasha Levin]

From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>

[ Upstream commit 8dd8f005bdd45823fc153ef490239558caf6ff20 ]

We make the invalid assumption in arm_smmu_detach_dev() that the ATC is
clear after calling pci_disable_ats(). For one thing, only enabling the
PCIe ATS capability constitutes an implicit invalidation event, so the
comment was wrong. More importantly, the ATS capability isn't necessarily
disabled by pci_disable_ats() in a PF, if the associated VFs have ATS
enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev().
The endpoint cannot form new ATC entries because STE.EATS is clear.

Fixes: 9ce27afc0830 ("iommu/arm-smmu-v3: Add support for PCI ATS")
Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com>
Reported-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm-smmu-v3.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 4d5a694f02c2..0fee8f7957ec 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1884,9 +1884,13 @@ static int arm_smmu_enable_ats(struct arm_smmu_master *master)
 
 static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 {
+	struct arm_smmu_cmdq_ent cmd;
+
 	if (!master->ats_enabled || !dev_is_pci(master->dev))
 		return;
 
+	arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
+	arm_smmu_atc_inv_master(master, &cmd);
 	pci_disable_ats(to_pci_dev(master->dev));
 	master->ats_enabled = false;
 }
@@ -1906,7 +1910,6 @@ static void arm_smmu_detach_dev(struct arm_smmu_master *master)
 	master->domain = NULL;
 	arm_smmu_install_ste_for_dev(master);
 
-	/* Disabling ATS invalidates all ATC entries */
 	arm_smmu_disable_ats(master);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 229/249] iommu/arm-smmu-v3: Invalidate ATC when detaching a device

[Sasha Levin]

From: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>

[ Upstream commit 8dd8f005bdd45823fc153ef490239558caf6ff20 ]

We make the invalid assumption in arm_smmu_detach_dev() that the ATC is
clear after calling pci_disable_ats(). For one thing, only enabling the
PCIe ATS capability constitutes an implicit invalidation event, so the
comment was wrong. More importantly, the ATS capability isn't necessarily
disabled by pci_disable_ats() in a PF, if the associated VFs have ATS
enabled. Explicitly invalidate all ATC entries in arm_smmu_detach_dev().
The endpoint cannot form new ATC entries because STE.EATS is clear.

Fixes: 9ce27afc0830 ("iommu/arm-smmu-v3: Add support for PCI ATS")
Reported-by: Manoj Kumar <Manoj.Kumar3@arm.com>
Reported-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm-smmu-v3.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 4d5a694f02c2..0fee8f7957ec 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1884,9 +1884,13 @@ static int arm_smmu_enable_ats(struct arm_smmu_master *master)
 
 static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 {
+	struct arm_smmu_cmdq_ent cmd;
+
 	if (!master->ats_enabled || !dev_is_pci(master->dev))
 		return;
 
+	arm_smmu_atc_inv_to_cmd(0, 0, 0, &cmd);
+	arm_smmu_atc_inv_master(master, &cmd);
 	pci_disable_ats(to_pci_dev(master->dev));
 	master->ats_enabled = false;
 }
@@ -1906,7 +1910,6 @@ static void arm_smmu_detach_dev(struct arm_smmu_master *master)
 	master->domain = NULL;
 	arm_smmu_install_ste_for_dev(master);
 
-	/* Disabling ATS invalidates all ATC entries */
 	arm_smmu_disable_ats(master);
 }
 
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.2 230/249] ASoC: audio-graph-card: fix use-after-free in graph_for_each_link

[Sasha Levin]

From: Wen Yang <wen.yang99@zte.com.cn>

[ Upstream commit 1bcc1fd64e4dd903f4d868a9e053986e3b102713 ]

After calling of_node_put() on the codec_ep and codec_port variables,
they are still being used, which may result in use-after-free.
We fix this issue by calling of_node_put() after the last usage.

Fixes: fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/generic/audio-graph-card.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index ec7e673ba475..70ed28d97d49 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -435,9 +435,6 @@ static int graph_for_each_link(struct asoc_simple_priv *priv,
 			codec_ep = of_graph_get_remote_endpoint(cpu_ep);
 			codec_port = of_get_parent(codec_ep);
 
-			of_node_put(codec_ep);
-			of_node_put(codec_port);
-
 			/* get convert-xxx property */
 			memset(&adata, 0, sizeof(adata));
 			graph_parse_convert(dev, codec_ep, &adata);
@@ -457,6 +454,9 @@ static int graph_for_each_link(struct asoc_simple_priv *priv,
 			else
 				ret = func_noml(priv, cpu_ep, codec_ep, li);
 
+			of_node_put(codec_ep);
+			of_node_put(codec_port);
+
 			if (ret < 0)
 				return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 231/249] tools: bpftool: Fix json dump crash on powerpc

[Sasha Levin]

From: Jiri Olsa <jolsa@redhat.com>

[ Upstream commit aa52bcbe0e72fac36b1862db08b9c09c4caefae3 ]

Michael reported crash with by bpf program in json mode on powerpc:

  # bpftool prog -p dump jited id 14
  [{
        "name": "0xd00000000a9aa760",
        "insns": [{
                "pc": "0x0",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x4",
                "operation": "nop",
                "operands": [null
                ]
            },{
                "pc": "0x8",
                "operation": "mflr",
  Segmentation fault (core dumped)

The code is assuming char pointers in format, which is not always
true at least for powerpc. Fixing this by dumping the whole string
into buffer based on its format.

Please note that libopcodes code does not check return values from
fprintf callback, but as per Jakub suggestion returning -1 on allocation
failure so we do the best effort to propagate the error.

Fixes: 107f041212c1 ("tools: bpftool: add JSON output for `bpftool prog dump jited *` command")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/jit_disasm.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index 3ef3093560ba..bfed711258ce 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -11,6 +11,8 @@
  * Licensed under the GNU General Public License, version 2.0 (GPLv2)
  */
 
+#define _GNU_SOURCE
+#include <stdio.h>
 #include <stdarg.h>
 #include <stdint.h>
 #include <stdio.h>
@@ -44,11 +46,13 @@ static int fprintf_json(void *out, const char *fmt, ...)
 	char *s;
 
 	va_start(ap, fmt);
+	if (vasprintf(&s, fmt, ap) < 0)
+		return -1;
+	va_end(ap);
+
 	if (!oper_count) {
 		int i;
 
-		s = va_arg(ap, char *);
-
 		/* Strip trailing spaces */
 		i = strlen(s) - 1;
 		while (s[i] == ' ')
@@ -61,11 +65,10 @@ static int fprintf_json(void *out, const char *fmt, ...)
 	} else if (!strcmp(fmt, ",")) {
 		   /* Skip */
 	} else {
-		s = va_arg(ap, char *);
 		jsonw_string(json_wtr, s);
 		oper_count++;
 	}
-	va_end(ap);
+	free(s);
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 232/249] net: hns3: enable broadcast promisc mode when initializing VF

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 2d5066fc175ea77a733d84df9ef414b34f311641 ]

For revision 0x20, the broadcast promisc is enabled by firmware,
it's unnecessary to enable it when initializing VF.

For revision 0x21, it's necessary to enable broadcast promisc mode
when initializing or re-initializing VF, otherwise, it will be
unable to send and receive promisc packets.

Fixes: f01f5559cac8 ("net: hns3: don't allow vf to enable promisc mode")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c  | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 5d53467ee2d2..3b02745605d4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2512,6 +2512,12 @@ static int hclgevf_reset_hdev(struct hclgevf_dev *hdev)
 		return ret;
 	}
 
+	if (pdev->revision >= 0x21) {
+		ret = hclgevf_set_promisc_mode(hdev, true);
+		if (ret)
+			return ret;
+	}
+
 	dev_info(&hdev->pdev->dev, "Reset done\n");
 
 	return 0;
@@ -2591,9 +2597,11 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 	 * firmware makes sure broadcast packets can be accepted.
 	 * For revision 0x21, default to enable broadcast promisc mode.
 	 */
-	ret = hclgevf_set_promisc_mode(hdev, true);
-	if (ret)
-		goto err_config;
+	if (pdev->revision >= 0x21) {
+		ret = hclgevf_set_promisc_mode(hdev, true);
+		if (ret)
+			goto err_config;
+	}
 
 	/* Initialize RSS for this VF */
 	ret = hclgevf_rss_init_hw(hdev);
-- 
2.20.1

[PATCH AUTOSEL 5.2 233/249] net: hns3: fix port capbility updating issue

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 49b1255603de5183c5e377200be3b3afe0dcdb86 ]

Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.

Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bab04d2d674a..f2bffc05e902 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2592,6 +2592,7 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
 		mac->speed_ability = le32_to_cpu(resp->speed_ability);
 		mac->autoneg = resp->autoneg;
 		mac->support_autoneg = resp->autoneg_ability;
+		mac->speed_type = QUERY_ACTIVE_SPEED;
 		if (!resp->active_fec)
 			mac->fec_mode = 0;
 		else
-- 
2.20.1

[PATCH AUTOSEL 5.2 234/249] Bluetooth: hci_bcsp: Fix memory leak in rx_skb

[Sasha Levin]

From: Tomas Bortoli <tomasbortoli@gmail.com>

[ Upstream commit 4ce9146e0370fcd573f0372d9b4e5a211112567c ]

Syzkaller found that it is possible to provoke a memory leak by
never freeing rx_skb in struct bcsp_struct.

Fix by freeing in bcsp_close()

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/hci_bcsp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 82b13faa9422..fe2e307009f4 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -744,6 +744,11 @@ static int bcsp_close(struct hci_uart *hu)
 	skb_queue_purge(&bcsp->rel);
 	skb_queue_purge(&bcsp->unrel);
 
+	if (bcsp->rx_skb) {
+		kfree_skb(bcsp->rx_skb);
+		bcsp->rx_skb = NULL;
+	}
+
 	kfree(bcsp);
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 235/249] Bluetooth: Add new 13d3:3491 QCA_ROME device

[Sasha Levin]

From: João Paulo Rechi Vita <jprvita@gmail.com>

[ Upstream commit 44d34af2e4cfd0c5357182f8b43f3e0a1fe30a2e ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3491 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 50aed5259c2b..21fa5c889857 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -264,6 +264,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3015), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x3016), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
 
 	/* Broadcom BCM2035 */
-- 
2.20.1

[PATCH AUTOSEL 5.2 236/249] Bluetooth: Add new 13d3:3501 QCA_ROME device

[Sasha Levin]

From: João Paulo Rechi Vita <jprvita@gmail.com>

[ Upstream commit 881cec4f6b4da78e54b73c046a60f39315964c7d ]

Without the QCA ROME setup routine this adapter fails to establish a SCO
connection.

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3501 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 21fa5c889857..6d61f5aafc78 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -266,6 +266,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x301a), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x13d3, 0x3491), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x13d3, 0x3496), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x13d3, 0x3501), .driver_info = BTUSB_QCA_ROME },
 
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
-- 
2.20.1

[PATCH AUTOSEL 5.2 237/249] Bluetooth: 6lowpan: search for destination address in all peers

[Sasha Levin]

From: Josua Mayer <josua.mayer@jm0.eu>

[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]

Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.

For one peer, no checks are performed to see if it is meant to receive
packets for a given address.

As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.

Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/6lowpan.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 1555b0c6f7ec..9001bf331d56 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -180,10 +180,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
 	}
 
 	if (!rt) {
-		nexthop = &lowpan_cb(skb)->gw;
-
-		if (ipv6_addr_any(nexthop))
-			return NULL;
+		if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+			/* There is neither route nor gateway,
+			 * probably the destination is a direct peer.
+			 */
+			nexthop = daddr;
+		} else {
+			/* There is a known gateway
+			 */
+			nexthop = &lowpan_cb(skb)->gw;
+		}
 	} else {
 		nexthop = rt6_nexthop(rt, daddr);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 238/249] genirq: Update irq stats from NMI handlers

[Sasha Levin]

From: Shijith Thotton <sthotton@marvell.com>

[ Upstream commit c09cb1293523dd786ae54a12fd88001542cba2f6 ]

The NMI handlers handle_percpu_devid_fasteoi_nmi() and handle_fasteoi_nmi()
do not update the interrupt counts. Due to that the NMI interrupt count
does not show up correctly in /proc/interrupts.

Add the statistics and treat the NMI handlers in the same way as per cpu
interrupts and prevent them from updating irq_desc::tot_count as this might
be corrupted due to concurrency.

[ tglx: Massaged changelog ]

Fixes: 2dcf1fbcad35 ("genirq: Provide NMI handlers")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1562313336-11888-1-git-send-email-sthotton@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/irq/chip.c    | 4 ++++
 kernel/irq/irqdesc.c | 8 +++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index 29d6c7d070b4..04c850fb70cb 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -748,6 +748,8 @@ void handle_fasteoi_nmi(struct irq_desc *desc)
 	unsigned int irq = irq_desc_get_irq(desc);
 	irqreturn_t res;
 
+	__kstat_incr_irqs_this_cpu(desc);
+
 	trace_irq_handler_entry(irq, action);
 	/*
 	 * NMIs cannot be shared, there is only one action.
@@ -962,6 +964,8 @@ void handle_percpu_devid_fasteoi_nmi(struct irq_desc *desc)
 	unsigned int irq = irq_desc_get_irq(desc);
 	irqreturn_t res;
 
+	__kstat_incr_irqs_this_cpu(desc);
+
 	trace_irq_handler_entry(irq, action);
 	res = action->handler(irq, raw_cpu_ptr(action->percpu_dev_id));
 	trace_irq_handler_exit(irq, action, res);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index c52b737ab8e3..9149dde5a7b0 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -946,6 +946,11 @@ unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
 			*per_cpu_ptr(desc->kstat_irqs, cpu) : 0;
 }
 
+static bool irq_is_nmi(struct irq_desc *desc)
+{
+	return desc->istate & IRQS_NMI;
+}
+
 /**
  * kstat_irqs - Get the statistics for an interrupt
  * @irq:	The interrupt number
@@ -963,7 +968,8 @@ unsigned int kstat_irqs(unsigned int irq)
 	if (!desc || !desc->kstat_irqs)
 		return 0;
 	if (!irq_settings_is_per_cpu_devid(desc) &&
-	    !irq_settings_is_per_cpu(desc))
+	    !irq_settings_is_per_cpu(desc) &&
+	    !irq_is_nmi(desc))
 	    return desc->tot_count;
 
 	for_each_possible_cpu(cpu)
-- 
2.20.1

[PATCH AUTOSEL 5.2 239/249] perf tests: Fix record+probe_libc_inet_pton.sh for powerpc64

[Sasha Levin]

From: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>

[ Upstream commit bff5a556c149804de29347a88a884d25e4e4e3a2 ]

'probe libc's inet_pton & backtrace it with ping' testcase sometimes
fails on powerpc because distro ping binary does not have symbol
information and thus it prints "[unknown]" function name in the
backtrace.

Accept "[unknown]" as valid function name for powerpc as well.

 # perf test -v "probe libc's inet_pton & backtrace it with ping"

Before:

  59: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 79695
  ping 79718 [077] 96483.787025: probe_libc:inet_pton: (7fff83a754c8)
  7fff83a754c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
  7fff83a2b7a0 gaih_inet.constprop.7+0x1020
  (/usr/lib64/power9/libc-2.28.so)
  7fff83a2c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
  1171830f4 [unknown] (/usr/bin/ping)
  FAIL: expected backtrace entry
  ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
  got "1171830f4 [unknown] (/usr/bin/ping)"
  test child finished with -1
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: FAILED!

After:

  59: probe libc's inet_pton & backtrace it with ping       :
  --- start ---
  test child forked, pid 79085
  ping 79108 [045] 96400.214177: probe_libc:inet_pton: (7fffbb9654c8)
  7fffbb9654c8 __GI___inet_pton+0x8 (/usr/lib64/power9/libc-2.28.so)
  7fffbb91b7a0 gaih_inet.constprop.7+0x1020
  (/usr/lib64/power9/libc-2.28.so)
  7fffbb91c170 getaddrinfo+0x160 (/usr/lib64/power9/libc-2.28.so)
  132e830f4 [unknown] (/usr/bin/ping)
  test child finished with 0
  ---- end ----
  probe libc's inet_pton & backtrace it with ping: Ok

Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Reviewed-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 1632936480a5 ("perf tests: Fix record+probe_libc_inet_pton.sh without ping's debuginfo")
Link: http://lkml.kernel.org/r/1561630614-3216-1-git-send-email-s1seetee@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/tests/shell/record+probe_libc_inet_pton.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
index 61c9f8fc6fa1..58a99a292930 100755
--- a/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
+++ b/tools/perf/tests/shell/record+probe_libc_inet_pton.sh
@@ -44,7 +44,7 @@ trace_libc_inet_pton_backtrace() {
 		eventattr='max-stack=4'
 		echo "gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\($libc\)$" >> $expected
 		echo "getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\($libc\)$" >> $expected
-		echo ".*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$" >> $expected
+		echo ".*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$" >> $expected
 		;;
 	*)
 		eventattr='max-stack=3'
-- 
2.20.1

[PATCH AUTOSEL 5.2 240/249] Bluetooth: Check state in l2cap_disconnect_rsp

[Sasha Levin]

From: Matias Karhumaa <matias.karhumaa@gmail.com>

[ Upstream commit 28261da8a26f4915aa257d12d506c6ba179d961f ]

Because of both sides doing L2CAP disconnection at the same time, it
was possible to receive L2CAP Disconnection Response with CID that was
already freed. That caused problems if CID was already reused and L2CAP
Connection Request with same CID was sent out. Before this patch kernel
deleted channel context regardless of the state of the channel.

Example where leftover Disconnection Response (frame #402) causes local
device to delete L2CAP channel which was not yet connected. This in
turn confuses remote device's stack because same CID is re-used without
properly disconnecting.

Btmon capture before patch:
** snip **
> ACL Data RX: Handle 43 flags 0x02 dlen 8                #394 [hci1] 10.748949
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8                #395 [hci1] 10.749062
      Channel: 65 len 4 [PSM 3 mode 0] {chan 2}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #396 [hci1] 10.749073
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5    #397 [hci1] 10.752391
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5    #398 [hci1] 10.753394
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #399 [hci1] 10.756499
      L2CAP: Disconnection Request (0x06) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #400 [hci1] 10.756548
      L2CAP: Disconnection Response (0x07) ident 26 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12               #401 [hci1] 10.757459
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #402 [hci1] 10.759148
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
= bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o..   10.759447
> HCI Event: Number of Completed Packets (0x13) plen 5    #403 [hci1] 10.759386
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12               #404 [hci1] 10.760397
      L2CAP: Connection Request (0x02) ident 27 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16               #405 [hci1] 10.760441
      L2CAP: Connection Response (0x03) ident 27 len 8
        Destination CID: 65
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27               #406 [hci1] 10.760449
      L2CAP: Configure Request (0x04) ident 19 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> HCI Event: Number of Completed Packets (0x13) plen 5    #407 [hci1] 10.761399
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 16               #408 [hci1] 10.762942
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Similar case after the patch:
*snip*
> ACL Data RX: Handle 43 flags 0x02 dlen 8            #22702 [hci0] 1664.411056
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Disconnect (DISC) (0x43)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x53 poll/final 1
         Length: 0
         FCS: 0xfd
< ACL Data TX: Handle 43 flags 0x00 dlen 8            #22703 [hci0] 1664.411136
      Channel: 65 len 4 [PSM 3 mode 0] {chan 3}
      RFCOMM: Unnumbered Ack (UA) (0x63)
         Address: 0x03 cr 1 dlci 0x00
         Control: 0x73 poll/final 1
         Length: 0
         FCS: 0xd7
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22704 [hci0] 1664.411143
      L2CAP: Disconnection Request (0x06) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22705 [hci0] 1664.414009
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22706 [hci0] 1664.415007
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22707 [hci0] 1664.418674
      L2CAP: Disconnection Request (0x06) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22708 [hci0] 1664.418762
      L2CAP: Disconnection Response (0x07) ident 17 len 4
        Destination CID: 65
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 12           #22709 [hci0] 1664.421073
      L2CAP: Connection Request (0x02) ident 12 len 4
        PSM: 1 (0x0001)
        Source CID: 65
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22710 [hci0] 1664.421371
      L2CAP: Disconnection Response (0x07) ident 11 len 4
        Destination CID: 65
        Source CID: 65
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22711 [hci0] 1664.424082
        Num handles: 1
        Handle: 43
        Count: 1
> HCI Event: Number of Completed Pac.. (0x13) plen 5  #22712 [hci0] 1664.425040
        Num handles: 1
        Handle: 43
        Count: 1
> ACL Data RX: Handle 43 flags 0x02 dlen 12           #22713 [hci0] 1664.426103
      L2CAP: Connection Request (0x02) ident 18 len 4
        PSM: 3 (0x0003)
        Source CID: 65
< ACL Data TX: Handle 43 flags 0x00 dlen 16           #22714 [hci0] 1664.426186
      L2CAP: Connection Response (0x03) ident 18 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 43 flags 0x00 dlen 27           #22715 [hci0] 1664.426196
      L2CAP: Configure Request (0x04) ident 13 len 19
        Destination CID: 65
        Flags: 0x0000
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 1013
        Option: Retransmission and Flow Control (0x04) [mandatory]
          Mode: Basic (0x00)
          TX window size: 0
          Max transmit: 0
          Retransmission timeout: 0
          Monitor timeout: 0
          Maximum PDU size: 0
> ACL Data RX: Handle 43 flags 0x02 dlen 16           #22716 [hci0] 1664.428804
      L2CAP: Connection Response (0x03) ident 12 len 8
        Destination CID: 66
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
*snip*

Fix is to check that channel is in state BT_DISCONN before deleting the
channel.

This bug was found while fuzzing Bluez's OBEX implementation using
Synopsys Defensics.

Reported-by: Matti Kamunen <matti.kamunen@synopsys.com>
Reported-by: Ari Timonen <ari.timonen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/l2cap_core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 5406d7cd46ad..771e3e17bb6a 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -4394,6 +4394,12 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn,
 
 	l2cap_chan_lock(chan);
 
+	if (chan->state != BT_DISCONN) {
+		l2cap_chan_unlock(chan);
+		mutex_unlock(&conn->chan_lock);
+		return 0;
+	}
+
 	l2cap_chan_hold(chan);
 	l2cap_chan_del(chan, 0);
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 241/249] Bluetooth: hidp: NUL terminate a string in the compat ioctl

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit dcae9052ebb0c5b2614de620323d615fcbfda7f8 ]

This change is similar to commit a1616a5ac99e ("Bluetooth: hidp: fix
buffer overflow") but for the compat ioctl.  We take a string from the
user and forgot to ensure that it's NUL terminated.

I have also changed the strncpy() in to strscpy() in hidp_setup_hid().
The difference is the strncpy() doesn't necessarily NUL terminate the
destination string.  Either change would fix the problem but it's nice
to take a belt and suspenders approach and do both.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hidp/core.c | 2 +-
 net/bluetooth/hidp/sock.c | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index a442e21f3894..5abd423b55fa 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -775,7 +775,7 @@ static int hidp_setup_hid(struct hidp_session *session,
 	hid->version = req->version;
 	hid->country = req->country;
 
-	strncpy(hid->name, req->name, sizeof(hid->name));
+	strscpy(hid->name, req->name, sizeof(hid->name));
 
 	snprintf(hid->phys, sizeof(hid->phys), "%pMR",
 		 &l2cap_pi(session->ctrl_sock->sk)->chan->src);
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 2151913892ce..03be6a4baef3 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -192,6 +192,7 @@ static int hidp_sock_compat_ioctl(struct socket *sock, unsigned int cmd, unsigne
 		ca.version = ca32.version;
 		ca.flags = ca32.flags;
 		ca.idle_to = ca32.idle_to;
+		ca32.name[sizeof(ca32.name) - 1] = '\0';
 		memcpy(ca.name, ca32.name, 128);
 
 		csock = sockfd_lookup(ca.ctrl_sock, &err);
-- 
2.20.1

[PATCH AUTOSEL 5.2 242/249] gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit e30155fd23c9c141cbe7d99b786e10a83a328837 ]

If an invalid role is sent from user space, gtp_encap_enable() will fail.
Then, it should call gtp_encap_disable_sock() but current code doesn't.
It makes memory leak.

Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index fc45b749db46..01fc51892e48 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -843,8 +843,13 @@ static int gtp_encap_enable(struct gtp_dev *gtp, struct nlattr *data[])
 
 	if (data[IFLA_GTP_ROLE]) {
 		role = nla_get_u32(data[IFLA_GTP_ROLE]);
-		if (role > GTP_ROLE_SGSN)
+		if (role > GTP_ROLE_SGSN) {
+			if (sk0)
+				gtp_encap_disable_sock(sk0);
+			if (sk1u)
+				gtp_encap_disable_sock(sk1u);
 			return -EINVAL;
+		}
 	}
 
 	gtp->sk0 = sk0;
-- 
2.20.1

[PATCH AUTOSEL 5.2 243/249] Bluetooth: validate BLE connection interval updates

[Sasha Levin]

From: csonsino <csonsino@gmail.com>

[ Upstream commit c49a8682fc5d298d44e8d911f4fa14690ea9485e ]

Problem: The Linux Bluetooth stack yields complete control over the BLE
connection interval to the remote device.

The Linux Bluetooth stack provides access to the BLE connection interval
min and max values through /sys/kernel/debug/bluetooth/hci0/
conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval.
These values are used for initial BLE connections, but the remote device
has the ability to request a connection parameter update. In the event
that the remote side requests to change the connection interval, the Linux
kernel currently only validates that the desired value is within the
acceptable range in the Bluetooth specification (6 - 3200, corresponding to
7.5ms - 4000ms). There is currently no validation that the desired value
requested by the remote device is within the min/max limits specified in
the conn_min_interval/conn_max_interval configurations. This essentially
leads to Linux yielding complete control over the connection interval to
the remote device.

The proposed patch adds a verification step to the connection parameter
update mechanism, ensuring that the desired value is within the min/max
bounds of the current connection. If the desired value is outside of the
current connection min/max values, then the connection parameter update
request is rejected and the negative response is returned to the remote
device. Recall that the initial connection is established using the local
conn_min_interval/conn_max_interval values, so this allows the Linux
administrator to retain control over the BLE connection interval.

The one downside that I see is that the current default Linux values for
conn_min_interval and conn_max_interval typically correspond to 30ms and
50ms respectively. If this change were accepted, then it is feasible that
some devices would no longer be able to negotiate to their desired
connection interval values. This might be remedied by setting the default
Linux conn_min_interval and conn_max_interval values to the widest
supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same
behavior as the current implementation, where the remote device could
request to change the connection interval value to any value that is
permitted by the Bluetooth specification, and Linux would accept the
desired value.

Signed-off-by: Carey Sonsino <csonsino@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c  | 5 +++++
 net/bluetooth/l2cap_core.c | 9 ++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 9e4fcf406d9c..17c50a98e7f7 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -5588,6 +5588,11 @@ static void hci_le_remote_conn_param_req_evt(struct hci_dev *hdev,
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_UNKNOWN_CONN_ID);
 
+	if (min < hcon->le_conn_min_interval ||
+	    max > hcon->le_conn_max_interval)
+		return send_conn_param_neg_reply(hdev, handle,
+						 HCI_ERROR_INVALID_LL_PARAMS);
+
 	if (hci_check_conn_params(min, max, latency, timeout))
 		return send_conn_param_neg_reply(hdev, handle,
 						 HCI_ERROR_INVALID_LL_PARAMS);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 771e3e17bb6a..32d2be9d6858 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -5297,7 +5297,14 @@ static inline int l2cap_conn_param_update_req(struct l2cap_conn *conn,
 
 	memset(&rsp, 0, sizeof(rsp));
 
-	err = hci_check_conn_params(min, max, latency, to_multiplier);
+	if (min < hcon->le_conn_min_interval ||
+	    max > hcon->le_conn_max_interval) {
+		BT_DBG("requested connection interval exceeds current bounds.");
+		err = -EINVAL;
+	} else {
+		err = hci_check_conn_params(min, max, latency, to_multiplier);
+	}
+
 	if (err)
 		rsp.result = cpu_to_le16(L2CAP_CONN_PARAM_REJECTED);
 	else
-- 
2.20.1

[PATCH AUTOSEL 5.2 244/249] gtp: fix suspicious RCU usage

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit e198987e7dd7d3645a53875151cd6f8fc425b706 ]

gtp_encap_enable_socket() and gtp_encap_destroy() are not protected
by rcu_read_lock(). and it's not safe to write sk->sk_user_data.
This patch make these functions to use lock_sock() instead of
rcu_dereference_sk_user_data().

Test commands:
    gtp-link add gtp1

Splat looks like:
[   83.238315] =============================
[   83.239127] WARNING: suspicious RCU usage
[   83.239702] 5.2.0-rc6+ #49 Not tainted
[   83.240268] -----------------------------
[   83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage!
[   83.243828]
[   83.243828] other info that might help us debug this:
[   83.243828]
[   83.246325]
[   83.246325] rcu_scheduler_active = 2, debug_locks = 1
[   83.247314] 1 lock held by gtp-link/1008:
[   83.248523]  #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0
[   83.251503]
[   83.251503] stack backtrace:
[   83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49
[   83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[   83.254562] Call Trace:
[   83.254995]  dump_stack+0x7c/0xbb
[   83.255567]  gtp_encap_enable_socket+0x2df/0x360 [gtp]
[   83.256415]  ? gtp_find_dev+0x1a0/0x1a0 [gtp]
[   83.257161]  ? memset+0x1f/0x40
[   83.257843]  gtp_newlink+0x90/0xa21 [gtp]
[   83.258497]  ? __netlink_ns_capable+0xc3/0xf0
[   83.259260]  __rtnl_newlink+0xb9f/0x11b0
[   83.260022]  ? rtnl_link_unregister+0x230/0x230
[ ... ]

Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 01fc51892e48..61f19e66be55 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -289,12 +289,14 @@ static void gtp_encap_destroy(struct sock *sk)
 {
 	struct gtp_dev *gtp;
 
-	gtp = rcu_dereference_sk_user_data(sk);
+	lock_sock(sk);
+	gtp = sk->sk_user_data;
 	if (gtp) {
 		udp_sk(sk)->encap_type = 0;
 		rcu_assign_sk_user_data(sk, NULL);
 		sock_put(sk);
 	}
+	release_sock(sk);
 }
 
 static void gtp_encap_disable_sock(struct sock *sk)
@@ -796,7 +798,8 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
 		goto out_sock;
 	}
 
-	if (rcu_dereference_sk_user_data(sock->sk)) {
+	lock_sock(sock->sk);
+	if (sock->sk->sk_user_data) {
 		sk = ERR_PTR(-EBUSY);
 		goto out_sock;
 	}
@@ -812,6 +815,7 @@ static struct sock *gtp_encap_enable_socket(int fd, int type,
 	setup_udp_tunnel_sock(sock_net(sock->sk), sock, &tuncfg);
 
 out_sock:
+	release_sock(sock->sk);
 	sockfd_put(sock);
 	return sk;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 245/249] gtp: fix Illegal context switch in RCU read-side critical section.

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 3f167e1921865b379a9becf03828e7202c7b4917 ]

ipv4_pdp_add() is called in RCU read-side critical section.
So GFP_KERNEL should not be used in the function.
This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL.

Test commands:
gtp-link add gtp1 &
gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2

Splat looks like:
[  130.618881] =============================
[  130.626382] WARNING: suspicious RCU usage
[  130.626994] 5.2.0-rc6+ #50 Not tainted
[  130.627622] -----------------------------
[  130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section!
[  130.629684]
[  130.629684] other info that might help us debug this:
[  130.629684]
[  130.631022]
[  130.631022] rcu_scheduler_active = 2, debug_locks = 1
[  130.632136] 4 locks held by gtp-tunnel/1025:
[  130.632925]  #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40
[  130.634159]  #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130
[  130.635487]  #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp]
[  130.636936]  #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp]
[  130.638348]
[  130.638348] stack backtrace:
[  130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50
[  130.641318] Call Trace:
[  130.641707]  dump_stack+0x7c/0xbb
[  130.642252]  ___might_sleep+0x2c0/0x3b0
[  130.642862]  kmem_cache_alloc_trace+0x1cd/0x2b0
[  130.643591]  gtp_genl_new_pdp+0x6c5/0x1150 [gtp]
[  130.644371]  genl_family_rcv_msg+0x63a/0x1030
[  130.645074]  ? mutex_lock_io_nested+0x1090/0x1090
[  130.645845]  ? genl_unregister_family+0x630/0x630
[  130.646592]  ? debug_show_all_locks+0x2d0/0x2d0
[  130.647293]  ? check_flags.part.40+0x440/0x440
[  130.648099]  genl_rcv_msg+0xa3/0x130
[ ... ]

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 61f19e66be55..b770335c03c1 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -954,7 +954,7 @@ static int ipv4_pdp_add(struct gtp_dev *gtp, struct sock *sk,
 
 	}
 
-	pctx = kmalloc(sizeof(struct pdp_ctx), GFP_KERNEL);
+	pctx = kmalloc(sizeof(*pctx), GFP_ATOMIC);
 	if (pctx == NULL)
 		return -ENOMEM;
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 246/249] gtp: fix use-after-free in gtp_encap_destroy()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit 1788b8569f5de27da09087fa3f6580d2aa04cc75 ]

gtp_encap_destroy() is called twice.
1. When interface is deleted.
2. When udp socket is destroyed.
either gtp->sk0 or gtp->sk1u could be freed by sock_put() in
gtp_encap_destroy(). so, when gtp_encap_destroy() is called again,
it would uses freed sk pointer.

patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to
null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected
by rtnl_lock. so, rtnl_lock() is added.

Test command:
   gtp-link add gtp1 &
   killall gtp-link
   ip link del gtp1

Splat looks like:
[   83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0
[   83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008
[   83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50
[   83.188469] Call Trace:
[ ... ]
[   83.200126]  lock_acquire+0x141/0x380
[   83.200575]  ? lock_sock_nested+0x3a/0xf0
[   83.201069]  _raw_spin_lock_bh+0x38/0x70
[   83.201551]  ? lock_sock_nested+0x3a/0xf0
[   83.202044]  lock_sock_nested+0x3a/0xf0
[   83.202520]  gtp_encap_destroy+0x18/0xe0 [gtp]
[   83.203065]  gtp_encap_disable.isra.14+0x13/0x50 [gtp]
[   83.203687]  gtp_dellink+0x56/0x170 [gtp]
[   83.204190]  rtnl_delete_link+0xb4/0x100
[ ... ]
[   83.236513] Allocated by task 976:
[   83.236925]  save_stack+0x19/0x80
[   83.237332]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[   83.237894]  kmem_cache_alloc+0xd8/0x280
[   83.238360]  sk_prot_alloc.isra.42+0x50/0x200
[   83.238874]  sk_alloc+0x32/0x940
[   83.239264]  inet_create+0x283/0xc20
[   83.239684]  __sock_create+0x2dd/0x540
[   83.240136]  __sys_socket+0xca/0x1a0
[   83.240550]  __x64_sys_socket+0x6f/0xb0
[   83.240998]  do_syscall_64+0x9c/0x450
[   83.241466]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   83.242061]
[   83.242249] Freed by task 0:
[   83.242616]  save_stack+0x19/0x80
[   83.243013]  __kasan_slab_free+0x111/0x150
[   83.243498]  kmem_cache_free+0x89/0x250
[   83.244444]  __sk_destruct+0x38f/0x5a0
[   83.245366]  rcu_core+0x7e9/0x1c20
[   83.245766]  __do_softirq+0x213/0x8fa

Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index b770335c03c1..5615cdb7202c 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -285,13 +285,17 @@ static int gtp1u_udp_encap_recv(struct gtp_dev *gtp, struct sk_buff *skb)
 	return gtp_rx(pctx, skb, hdrlen, gtp->role);
 }
 
-static void gtp_encap_destroy(struct sock *sk)
+static void __gtp_encap_destroy(struct sock *sk)
 {
 	struct gtp_dev *gtp;
 
 	lock_sock(sk);
 	gtp = sk->sk_user_data;
 	if (gtp) {
+		if (gtp->sk0 == sk)
+			gtp->sk0 = NULL;
+		else
+			gtp->sk1u = NULL;
 		udp_sk(sk)->encap_type = 0;
 		rcu_assign_sk_user_data(sk, NULL);
 		sock_put(sk);
@@ -299,12 +303,19 @@ static void gtp_encap_destroy(struct sock *sk)
 	release_sock(sk);
 }
 
+static void gtp_encap_destroy(struct sock *sk)
+{
+	rtnl_lock();
+	__gtp_encap_destroy(sk);
+	rtnl_unlock();
+}
+
 static void gtp_encap_disable_sock(struct sock *sk)
 {
 	if (!sk)
 		return;
 
-	gtp_encap_destroy(sk);
+	__gtp_encap_destroy(sk);
 }
 
 static void gtp_encap_disable(struct gtp_dev *gtp)
@@ -1043,6 +1054,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
 		return -EINVAL;
 	}
 
+	rtnl_lock();
 	rcu_read_lock();
 
 	gtp = gtp_find_dev(sock_net(skb->sk), info->attrs);
@@ -1067,6 +1079,7 @@ static int gtp_genl_new_pdp(struct sk_buff *skb, struct genl_info *info)
 
 out_unlock:
 	rcu_read_unlock();
+	rtnl_unlock();
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.2 247/249] gtp: fix use-after-free in gtp_newlink()

[Sasha Levin]

From: Taehee Yoo <ap420073@gmail.com>

[ Upstream commit a2bed90704c68d3763bf24decb1b781a45395de8 ]

Current gtp_newlink() could be called after unregister_pernet_subsys().
gtp_newlink() uses gtp_net but it can be destroyed by
unregister_pernet_subsys().
So unregister_pernet_subsys() should be called after
rtnl_link_unregister().

Test commands:
   #SHELL 1
   while :
   do
	   for i in {1..5}
	   do
		./gtp-link add gtp$i &
	   done
	   killall gtp-link
   done

   #SHELL 2
   while :
   do
	modprobe -rv gtp
   done

Splat looks like:
[  753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp]
[  753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126
[  753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G        W         5.2.0-rc6+ #50
[  753.185801] Call Trace:
[  753.186264]  dump_stack+0x7c/0xbb
[  753.186863]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.187583]  print_address_description+0xc7/0x240
[  753.188382]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189097]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.189846]  __kasan_report+0x12a/0x16f
[  753.190542]  ? gtp_newlink+0x9b4/0xa5c [gtp]
[  753.191298]  kasan_report+0xe/0x20
[  753.191893]  gtp_newlink+0x9b4/0xa5c [gtp]
[  753.192580]  ? __netlink_ns_capable+0xc3/0xf0
[  753.193370]  __rtnl_newlink+0xb9f/0x11b0
[ ... ]
[  753.241201] Allocated by task 7186:
[  753.241844]  save_stack+0x19/0x80
[  753.242399]  __kasan_kmalloc.constprop.3+0xa0/0xd0
[  753.243192]  __kmalloc+0x13e/0x300
[  753.243764]  ops_init+0xd6/0x350
[  753.244314]  register_pernet_operations+0x249/0x6f0
[ ... ]
[  753.251770] Freed by task 7178:
[  753.252288]  save_stack+0x19/0x80
[  753.252833]  __kasan_slab_free+0x111/0x150
[  753.253962]  kfree+0xc7/0x280
[  753.254509]  ops_free_list.part.11+0x1c4/0x2d0
[  753.255241]  unregister_pernet_operations+0x262/0x390
[ ... ]
[  753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next.
[  753.287241] ------------[ cut here ]------------
[  753.287794] kernel BUG at lib/list_debug.c:25!
[  753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G    B   W         5.2.0-rc6+ #50
[  753.291036] RIP: 0010:__list_add_valid+0x74/0xd0
[  753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b
[  753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286
[  753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000
[  753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69
[  753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21
[  753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878
[  753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458
[  753.299564] FS:  00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000
[  753.300533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0
[  753.302183] Call Trace:
[  753.302530]  gtp_newlink+0x5f6/0xa5c [gtp]
[  753.303037]  ? __netlink_ns_capable+0xc3/0xf0
[  753.303576]  __rtnl_newlink+0xb9f/0x11b0
[  753.304092]  ? rtnl_link_unregister+0x230/0x230

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/gtp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c
index 5615cdb7202c..607f38712b4e 100644
--- a/drivers/net/gtp.c
+++ b/drivers/net/gtp.c
@@ -1382,9 +1382,9 @@ late_initcall(gtp_init);
 
 static void __exit gtp_fini(void)
 {
-	unregister_pernet_subsys(&gtp_net_ops);
 	genl_unregister_family(&gtp_genl_family);
 	rtnl_link_unregister(&gtp_link_ops);
+	unregister_pernet_subsys(&gtp_net_ops);
 
 	pr_info("GTP module unloaded\n");
 }
-- 
2.20.1

[PATCH AUTOSEL 5.2 248/249] xdp: fix race on generic receive path

[Sasha Levin]

From: Ilya Maximets <i.maximets@samsung.com>

[ Upstream commit bf0bdd1343efbbf65b4d53aef1fce14acbd79d50 ]

Unlike driver mode, generic xdp receive could be triggered
by different threads on different CPU cores at the same time
leading to the fill and rx queue breakage. For example, this
could happen while sending packets from two processes to the
first interface of veth pair while the second part of it is
open with AF_XDP socket.

Need to take a lock for each generic receive to avoid race.

Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/xdp_sock.h |  2 ++
 net/xdp/xsk.c          | 31 ++++++++++++++++++++++---------
 2 files changed, 24 insertions(+), 9 deletions(-)

diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h
index d074b6d60f8a..ac3c047d058c 100644
--- a/include/net/xdp_sock.h
+++ b/include/net/xdp_sock.h
@@ -67,6 +67,8 @@ struct xdp_sock {
 	 * in the SKB destructor callback.
 	 */
 	spinlock_t tx_completion_lock;
+	/* Protects generic receive. */
+	spinlock_t rx_lock;
 	u64 rx_dropped;
 };
 
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
index a14e8864e4fa..5e0637db92ea 100644
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -123,13 +123,17 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	u64 addr;
 	int err;
 
-	if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index)
-		return -EINVAL;
+	spin_lock_bh(&xs->rx_lock);
+
+	if (xs->dev != xdp->rxq->dev || xs->queue_id != xdp->rxq->queue_index) {
+		err = -EINVAL;
+		goto out_unlock;
+	}
 
 	if (!xskq_peek_addr(xs->umem->fq, &addr) ||
 	    len > xs->umem->chunk_size_nohr - XDP_PACKET_HEADROOM) {
-		xs->rx_dropped++;
-		return -ENOSPC;
+		err = -ENOSPC;
+		goto out_drop;
 	}
 
 	addr += xs->umem->headroom;
@@ -138,13 +142,21 @@ int xsk_generic_rcv(struct xdp_sock *xs, struct xdp_buff *xdp)
 	memcpy(buffer, xdp->data_meta, len + metalen);
 	addr += metalen;
 	err = xskq_produce_batch_desc(xs->rx, addr, len);
-	if (!err) {
-		xskq_discard_addr(xs->umem->fq);
-		xsk_flush(xs);
-		return 0;
-	}
+	if (err)
+		goto out_drop;
+
+	xskq_discard_addr(xs->umem->fq);
+	xskq_produce_flush_desc(xs->rx);
 
+	spin_unlock_bh(&xs->rx_lock);
+
+	xs->sk.sk_data_ready(&xs->sk);
+	return 0;
+
+out_drop:
 	xs->rx_dropped++;
+out_unlock:
+	spin_unlock_bh(&xs->rx_lock);
 	return err;
 }
 
@@ -765,6 +777,7 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol,
 
 	xs = xdp_sk(sk);
 	mutex_init(&xs->mutex);
+	spin_lock_init(&xs->rx_lock);
 	spin_lock_init(&xs->tx_completion_lock);
 
 	mutex_lock(&net->xdp.lock);
-- 
2.20.1

[PATCH AUTOSEL 5.2 249/249] net: mvmdio: defer probe of orion-mdio if a clock is not ready

[Sasha Levin]

From: Josua Mayer <josua@solid-run.com>

[ Upstream commit 433a06d7d74e677c40b1148c70c48677ff62fb6b ]

Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvmdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index c5dac6bd2be4..903836e334d8 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -321,6 +321,10 @@ static int orion_mdio_probe(struct platform_device *pdev)
 
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		dev->clk[i] = of_clk_get(pdev->dev.of_node, i);
+		if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			goto out_clk;
+		}
 		if (IS_ERR(dev->clk[i]))
 			break;
 		clk_prepare_enable(dev->clk[i]);
@@ -362,6 +366,7 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	if (dev->err_interrupt > 0)
 		writel(0, dev->regs + MVMDIO_ERR_INT_MASK);
 
+out_clk:
 	for (i = 0; i < ARRAY_SIZE(dev->clk); i++) {
 		if (IS_ERR(dev->clk[i]))
 			break;
-- 
2.20.1