[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines

[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines

[laurentiu.tudor at nxp.com]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

Add defines for all the SEC job rings base addresses.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index ee9b33becf..7cd5333ff4 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -89,10 +89,18 @@
 /* SEC */
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x07000000ull
 #define CONFIG_SYS_FSL_JR0_OFFSET		0x07010000ull
+#define FSL_SEC_JR0_OFFSET			CONFIG_SYS_FSL_JR0_OFFSET
+#define FSL_SEC_JR1_OFFSET			0x07020000ull
+#define FSL_SEC_JR2_OFFSET			0x07030000ull
+#define FSL_SEC_JR3_OFFSET			0x07040000ull
 #define CONFIG_SYS_FSL_SEC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SEC_OFFSET)
 #define CONFIG_SYS_FSL_JR0_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_JR0_OFFSET)
+#define FSL_SEC_JR0_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR0_OFFSET)
+#define FSL_SEC_JR1_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR1_OFFSET)
+#define FSL_SEC_JR2_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR2_OFFSET)
+#define FSL_SEC_JR3_BASE_ADDR (CONFIG_SYS_IMMR + FSL_SEC_JR3_OFFSET)
 
 #ifdef CONFIG_TFABOOT
 #ifdef CONFIG_NXP_LSCH3_2
-- 
2.17.1

[U-Boot] [PATCH 2/5] armv8: fsl-layerscape: add base addresses for several devices

[laurentiu.tudor at nxp.com]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

Add CCSR base addresses for ESDHC2, EDMA QDMA, DISPLAY and GPU devices.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 7cd5333ff4..84bed8d423 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -25,6 +25,8 @@
 #define CONFIG_SYS_FSL_CH3_CLK_CTRL_ADDR	(CONFIG_SYS_IMMR + 0x00370000)
 #define SYS_FSL_QSPI_ADDR			(CONFIG_SYS_IMMR + 0x010c0000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x01140000)
+#define FSL_ESDHC1_BASE_ADDR			CONFIG_SYS_FSL_ESDHC_ADDR
+#define FSL_ESDHC2_BASE_ADDR			(CONFIG_SYS_IMMR + 0x01150000)
 #ifndef CONFIG_NXP_LSCH3_2
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x01240000)
 #endif
@@ -79,10 +81,23 @@
 #define TZASC_REGION_ATTRIBUTES_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x110)
 #define TZASC_REGION_ID_ACCESS_0(x)	((TZASC1_BASE + (x * 0x10000)) + 0x114)
 
+/* EDMA */
+#define EDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x012c0000)
+
 /* SATA */
 #define AHCI_BASE_ADDR1				(CONFIG_SYS_IMMR + 0x02200000)
 #define AHCI_BASE_ADDR2				(CONFIG_SYS_IMMR + 0x02210000)
 
+/* QDMA */
+#define QDMA_BASE_ADDR				(CONFIG_SYS_IMMR + 0x07380000)
+#define QMAN_CQSIDR_REG				0x20a80
+
+/* DISPLAY */
+#define DISPLAY_BASE_ADDR			(CONFIG_SYS_IMMR + 0x0e080000)
+
+/* GPU */
+#define GPU_BASE_ADDR				(CONFIG_SYS_IMMR + 0x0e0c0000)
+
 /* SFP */
 #define CONFIG_SYS_SFP_ADDR		(CONFIG_SYS_IMMR + 0x00e80200)
 
-- 
2.17.1

[U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware

[laurentiu.tudor at nxp.com]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

The current implementation assumes that the registers holding the ICIDs
are universally big endian. That's no longer the case on newer
platforms so update the code to take into account the endianness of
each register.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/icid.c      |  5 ++-
 .../asm/arch-fsl-layerscape/fsl_icid.h        | 34 +++++++++++++------
 2 files changed, 28 insertions(+), 11 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
index b1a950e7f9..82c5a8b123 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/icid.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
@@ -17,7 +17,10 @@ static void set_icid(struct icid_id_table *tbl, int size)
 	int i;
 
 	for (i = 0; i < size; i++)
-		out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+		if (tbl[i].le)
+			out_le32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+		else
+			out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
 }
 
 #ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index f971af8d26..435ffb04fa 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -17,6 +17,7 @@ struct icid_id_table {
 	u32 reg;
 	phys_addr_t compat_addr;
 	phys_addr_t reg_addr;
+	bool le;
 };
 
 struct fman_icid_id_table {
@@ -30,18 +31,25 @@ int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int num_ids);
 void set_icids(void);
 void fdt_fixup_icid(void *blob);
 
-#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \
+#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr, _le) \
 	{ .compat = name, \
 	  .id = idA, \
 	  .reg = regA, \
 	  .compat_addr = compataddr, \
 	  .reg_addr = addr, \
+	  .le = _le \
 	}
 
+#ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
+#define SCFG_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
+#define SCFG_IS_LE false
+#endif
+
 #define SET_SCFG_ICID(compat, streamid, name, compataddr) \
 	SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
 		offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
-		compataddr)
+		compataddr, SCFG_IS_LE)
 
 #define SET_USB_ICID(usb_num, compat, streamid) \
 	SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\
@@ -58,10 +66,10 @@ void fdt_fixup_icid(void *blob);
 #define SET_QDMA_ICID(compat, streamid) \
 	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
 		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
-		QDMA_BASE_ADDR), \
+		QDMA_BASE_ADDR, false), \
 	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
 		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
-		QDMA_BASE_ADDR)
+		QDMA_BASE_ADDR, false)
 
 #define SET_EDMA_ICID(streamid) \
 	SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
@@ -81,22 +89,28 @@ void fdt_fixup_icid(void *blob);
 	SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
 		offsetof(struct ccsr_qman, liodnr) + \
 		CONFIG_SYS_FSL_QMAN_ADDR, \
-		CONFIG_SYS_FSL_QMAN_ADDR)
+		CONFIG_SYS_FSL_QMAN_ADDR, false)
 
 #define SET_BMAN_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,bman", streamid, streamid, \
 		offsetof(struct ccsr_bman, liodnr) + \
 		CONFIG_SYS_FSL_BMAN_ADDR, \
-		CONFIG_SYS_FSL_BMAN_ADDR)
+		CONFIG_SYS_FSL_BMAN_ADDR, false)
 
 #define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
 	{ .port_id = (_port_id), .icid = (streamid) }
 
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
 #define SET_SEC_QI_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
 		0, offsetof(ccsr_sec_t, qilcr_ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
-		CONFIG_SYS_FSL_SEC_ADDR)
+		CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
 
 #define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
 	SET_ICID_ENTRY( \
@@ -109,17 +123,17 @@ void fdt_fixup_icid(void *blob);
 		(((streamid) << 16) | (streamid)), \
 		offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
-		FSL_SEC_JR##jr_num##_BASE_ADDR)
+		FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
 
 #define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
 	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
 		offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
-		CONFIG_SYS_FSL_SEC_ADDR, 0)
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 #define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
 	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
 		offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
-		CONFIG_SYS_FSL_SEC_ADDR, 0)
+		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 extern struct icid_id_table icid_tbl[];
 extern struct fman_icid_id_table fman_icid_tbl[];
-- 
2.17.1

[U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices

[laurentiu.tudor at nxp.com]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
the format of the registers is different.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Makefile    |  1 +
 .../arm/cpu/armv8/fsl-layerscape/ls1088_ids.c | 30 +++++++++++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c       |  4 ++
 .../asm/arch-fsl-layerscape/fsl_icid.h        | 54 +++++++++++++++----
 .../asm/arch-fsl-layerscape/stream_id_lsch3.h |  6 +++
 board/freescale/ls1088a/ls1088a.c             |  4 ++
 6 files changed, 89 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index a8d3cf91fc..aa88b93175 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -47,6 +47,7 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1088A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o
+obj-y += icid.o ls1088_ids.o
 endif
 
 ifneq ($(CONFIG_ARCH_LS1028A),)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
new file mode 100644
index 0000000000..956d6e78c8
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_SDHC_ICID(FSL_SDMMC_STREAM_ID),
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 7414215208..467c34649f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -339,6 +339,10 @@ void fsl_lsch3_early_init_f(void)
 	if (fsl_check_boot_mode_secure() == 1)
 		bypass_smmu();
 #endif
+
+#ifdef CONFIG_ARCH_LS1088A
+	set_icids();
+#endif
 }
 
 /* Get VDD in the unit mV from voltage ID */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index 435ffb04fa..feb3304364 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -40,6 +40,14 @@ void fdt_fixup_icid(void *blob);
 	  .le = _le \
 	}
 
+#ifdef CONFIG_SYS_FSL_SEC_LE
+#define SEC_IS_LE true
+#elif defined(CONFIG_SYS_FSL_SEC_BE)
+#define SEC_IS_LE false
+#endif
+
+#ifdef CONFIG_FSL_LSCH2
+
 #ifdef CONFIG_SYS_FSL_CCSR_SCFG_LE
 #define SCFG_IS_LE true
 #elif defined(CONFIG_SYS_FSL_CCSR_SCFG_BE)
@@ -100,11 +108,7 @@ void fdt_fixup_icid(void *blob);
 #define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
 	{ .port_id = (_port_id), .icid = (streamid) }
 
-#ifdef CONFIG_SYS_FSL_SEC_LE
-#define SEC_IS_LE true
-#elif defined(CONFIG_SYS_FSL_SEC_BE)
-#define SEC_IS_LE false
-#endif
+#define SEC_ICID_REG_VAL(streamid) (((streamid) << 16) | (streamid))
 
 #define SET_SEC_QI_ICID(streamid) \
 	SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
@@ -112,6 +116,38 @@ void fdt_fixup_icid(void *blob);
 		CONFIG_SYS_FSL_SEC_ADDR, \
 		CONFIG_SYS_FSL_SEC_ADDR, SEC_IS_LE)
 
+extern struct fman_icid_id_table fman_icid_tbl[];
+extern int fman_icid_tbl_sz;
+
+#else /* CONFIG_FSL_LSCH2 */
+
+#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE
+#define GUR_IS_LE true
+#elif defined(CONFIG_SYS_FSL_CCSR_GUR_BE)
+#define GUR_IS_LE false
+#endif
+
+#define SET_GUR_ICID(compat, streamid, name, compataddr) \
+	SET_ICID_ENTRY(compat, streamid, streamid, \
+		offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
+		compataddr, GUR_IS_LE)
+
+#define SET_USB_ICID(usb_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\
+		CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
+
+#define SET_SATA_ICID(sata_num, compat, streamid) \
+	SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
+		AHCI_BASE_ADDR##sata_num)
+
+#define SET_SDHC_ICID(streamid) \
+	SET_GUR_ICID("fsl,esdhc", streamid, sdmm1_amqr,\
+		CONFIG_SYS_FSL_ESDHC_ADDR)
+
+#define SEC_ICID_REG_VAL(streamid) (streamid)
+
+#endif /* CONFIG_FSL_LSCH2 */
+
 #define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
 	SET_ICID_ENTRY( \
 		(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
@@ -120,24 +156,22 @@ void fdt_fixup_icid(void *blob);
 			? NULL \
 			: "fsl,sec-v4.0-job-ring"), \
 		streamid, \
-		(((streamid) << 16) | (streamid)), \
+		SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, \
 		FSL_SEC_JR##jr_num##_BASE_ADDR, SEC_IS_LE)
 
 #define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 #define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
-	SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
+	SET_ICID_ENTRY(NULL, streamid, SEC_ICID_REG_VAL(streamid), \
 		offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
 		CONFIG_SYS_FSL_SEC_ADDR, 0, SEC_IS_LE)
 
 extern struct icid_id_table icid_tbl[];
-extern struct fman_icid_id_table fman_icid_tbl[];
 extern int icid_tbl_sz;
-extern int fman_icid_tbl_sz;
 
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index c53cc57e56..383eb259bd 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -98,4 +98,10 @@
 #define FSL_DPAA2_STREAM_ID_START	23
 #define FSL_DPAA2_STREAM_ID_END		63
 
+#define FSL_SEC_STREAM_ID		64
+#define FSL_SEC_JR1_STREAM_ID		65
+#define FSL_SEC_JR2_STREAM_ID		66
+#define FSL_SEC_JR3_STREAM_ID		67
+#define FSL_SEC_JR4_STREAM_ID		68
+
 #endif
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 6d11a134dc..7fde358325 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -20,6 +20,7 @@
 #include <hwconfig.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 
 #include "../common/qixis.h"
 #include "ls1088a_qixis.h"
@@ -768,6 +769,9 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_FSL_MC_ENET
 	fdt_fixup_board_enet(blob);
 #endif
+
+	fdt_fixup_icid(blob);
+
 	if (is_pb_board())
 		fixup_ls1088ardb_pb_banner(blob);
 
-- 
2.17.1

[U-Boot] [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices

[laurentiu.tudor at nxp.com]

From: Laurentiu Tudor <laurentiu.tudor@nxp.com>

Add ICID setup for the platform devices contained on this chip: usb,
sata, sdhc, edma, qdma, gpu, display and sec.

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Makefile    |  1 +
 .../arm/cpu/armv8/fsl-layerscape/ls1028_ids.c | 33 ++++++++++++++++
 .../arm/cpu/armv8/fsl-layerscape/ls1088_ids.c |  2 +-
 arch/arm/cpu/armv8/fsl-layerscape/soc.c       |  2 +-
 .../asm/arch-fsl-layerscape/fsl_icid.h        | 38 +++++++++++++------
 .../asm/arch-fsl-layerscape/immap_lsch3.h     |  6 ++-
 .../asm/arch-fsl-layerscape/stream_id_lsch3.h |  7 +++-
 board/freescale/ls1028a/ls1028a.c             |  3 ++
 8 files changed, 76 insertions(+), 16 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index aa88b93175..efecbc07e7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -52,4 +52,5 @@ endif
 
 ifneq ($(CONFIG_ARCH_LS1028A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1028a_serdes.o
+obj-y += icid.o ls1028_ids.o
 endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
new file mode 100644
index 0000000000..d9d125e8ba
--- /dev/null
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028_ids.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/arch-fsl-layerscape/fsl_portals.h>
+
+struct icid_id_table icid_tbl[] = {
+	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
+	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
+	SET_SDHC_ICID(2, FSL_SDMMC2_STREAM_ID),
+	SET_SATA_ICID(1, "fsl,ls1028a-ahci", FSL_SATA1_STREAM_ID),
+	SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
+	SET_QDMA_ICID("fsl,ls1028a-qdma", FSL_DMA_STREAM_ID),
+	SET_GPU_ICID("fsl,ls1028a-gpu", FSL_GPU_STREAM_ID),
+	SET_DISPLAY_ICID(FSL_DISPLAY_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(0, FSL_SEC_JR1_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(1, FSL_SEC_JR2_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(2, FSL_SEC_JR3_STREAM_ID),
+	SET_SEC_JR_ICID_ENTRY(3, FSL_SEC_JR4_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(2, FSL_SEC_STREAM_ID),
+	SET_SEC_RTIC_ICID_ENTRY(3, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(0, FSL_SEC_STREAM_ID),
+	SET_SEC_DECO_ICID_ENTRY(1, FSL_SEC_STREAM_ID),
+};
+
+int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
index 956d6e78c8..49e27553b1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1088_ids.c
@@ -9,7 +9,7 @@
 #include <asm/arch-fsl-layerscape/fsl_portals.h>
 
 struct icid_id_table icid_tbl[] = {
-	SET_SDHC_ICID(FSL_SDMMC_STREAM_ID),
+	SET_SDHC_ICID(1, FSL_SDMMC_STREAM_ID),
 	SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
 	SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
 	SET_SATA_ICID(1, "fsl,ls1088a-ahci", FSL_SATA1_STREAM_ID),
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 467c34649f..eca21db289 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -340,7 +340,7 @@ void fsl_lsch3_early_init_f(void)
 		bypass_smmu();
 #endif
 
-#ifdef CONFIG_ARCH_LS1088A
+#if defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A)
 	set_icids();
 #endif
 }
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
index feb3304364..37e2fe4e66 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
@@ -54,6 +54,8 @@ void fdt_fixup_icid(void *blob);
 #define SCFG_IS_LE false
 #endif
 
+#define QDMA_IS_LE false
+
 #define SET_SCFG_ICID(compat, streamid, name, compataddr) \
 	SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
 		offsetof(struct ccsr_scfg, name) + CONFIG_SYS_FSL_SCFG_ADDR, \
@@ -71,14 +73,6 @@ void fdt_fixup_icid(void *blob);
 	SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\
 		CONFIG_SYS_FSL_ESDHC_ADDR)
 
-#define SET_QDMA_ICID(compat, streamid) \
-	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
-		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
-		QDMA_BASE_ADDR, false), \
-	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
-		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
-		QDMA_BASE_ADDR, false)
-
 #define SET_EDMA_ICID(streamid) \
 	SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
 		EDMA_BASE_ADDR)
@@ -127,6 +121,8 @@ extern int fman_icid_tbl_sz;
 #define GUR_IS_LE false
 #endif
 
+#define QDMA_IS_LE true
+
 #define SET_GUR_ICID(compat, streamid, name, compataddr) \
 	SET_ICID_ENTRY(compat, streamid, streamid, \
 		offsetof(struct ccsr_gur, name) + CONFIG_SYS_FSL_GUTS_ADDR, \
@@ -140,14 +136,34 @@ extern int fman_icid_tbl_sz;
 	SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \
 		AHCI_BASE_ADDR##sata_num)
 
-#define SET_SDHC_ICID(streamid) \
-	SET_GUR_ICID("fsl,esdhc", streamid, sdmm1_amqr,\
-		CONFIG_SYS_FSL_ESDHC_ADDR)
+#define SET_SDHC_ICID(sdhc_num, streamid) \
+	SET_GUR_ICID("fsl,esdhc", streamid, sdmm##sdhc_num##_amqr,\
+		FSL_ESDHC##sdhc_num##_BASE_ADDR)
+
+#define SET_EDMA_ICID(streamid) \
+	SET_GUR_ICID("fsl,vf610-edma", streamid, spare3_amqr,\
+		EDMA_BASE_ADDR)
+
+#define SET_GPU_ICID(compat, streamid) \
+	SET_GUR_ICID(compat, streamid, misc1_amqr,\
+		GPU_BASE_ADDR)
+
+#define SET_DISPLAY_ICID(streamid) \
+	SET_GUR_ICID("arm,mali-dp500", streamid, spare2_amqr,\
+		DISPLAY_BASE_ADDR)
 
 #define SEC_ICID_REG_VAL(streamid) (streamid)
 
 #endif /* CONFIG_FSL_LSCH2 */
 
+#define SET_QDMA_ICID(compat, streamid) \
+	SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
+		QDMA_BASE_ADDR, QDMA_IS_LE), \
+	SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
+		QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
+		QDMA_BASE_ADDR, QDMA_IS_LE)
+
 #define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
 	SET_ICID_ENTRY( \
 		(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 84bed8d423..8a5446df1a 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -440,7 +440,8 @@ struct ccsr_gur {
 	u32	usb2_amqr;
 	u8	res_528[0x530-0x528];	/* add more registers when needed */
 	u32	sdmm1_amqr;
-	u8	res_534[0x550-0x534];	/* add more registers when needed */
+	u32	sdmm2_amqr;
+	u8	res_538[0x550 - 0x538];	/* add more registers when needed */
 	u32	sata1_amqr;
 	u32	sata2_amqr;
 	u8	res_558[0x570-0x558];	/* add more registers when needed */
@@ -448,7 +449,8 @@ struct ccsr_gur {
 	u8	res_574[0x590-0x574];	/* add more registers when needed */
 	u32	spare1_amqr;
 	u32	spare2_amqr;
-	u8	res_598[0x620-0x598];	/* add more registers when needed */
+	u32	spare3_amqr;
+	u8	res_59c[0x620 - 0x59c];	/* add more registers when needed */
 	u32	gencr[7];	/* General Control Registers */
 	u8	res_63c[0x640-0x63c];	/* add more registers when needed */
 	u32	cgensr1;	/* Core General Status Register */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
index 383eb259bd..93bdcc4caa 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h
@@ -76,7 +76,7 @@
 
 #if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LX2160A)
 #define FSL_DMA_STREAM_ID		6
-#elif defined(CONFIG_ARCH_LS1088A)
+#elif defined(CONFIG_ARCH_LS1088A) || defined(CONFIG_ARCH_LS1028A)
 #define FSL_DMA_STREAM_ID		5
 #endif
 
@@ -104,4 +104,9 @@
 #define FSL_SEC_JR3_STREAM_ID		67
 #define FSL_SEC_JR4_STREAM_ID		68
 
+#define FSL_SDMMC2_STREAM_ID		69
+#define FSL_EDMA_STREAM_ID		70
+#define FSL_GPU_STREAM_ID		71
+#define FSL_DISPLAY_STREAM_ID		72
+
 #endif
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
index e5de4eb70c..d64481d27e 100644
--- a/board/freescale/ls1028a/ls1028a.c
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -13,6 +13,7 @@
 #include <linux/libfdt.h>
 #include <environment.h>
 #include <asm/arch-fsl-layerscape/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
 #include <i2c.h>
 #include <asm/arch/soc.h>
 #ifdef CONFIG_FSL_LS_PPA
@@ -135,6 +136,8 @@ int ft_board_setup(void *blob, bd_t *bd)
 
 	fdt_fixup_memory_banks(blob, base, size, 2);
 
+	fdt_fixup_icid(blob);
+
 	return 0;
 }
 #endif
-- 
2.17.1

[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines

[Horia Geanta]

On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> Add defines for all the SEC job rings base addresses.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>

Thanks,
Horia

[U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware

[Horia Geanta]

On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> The current implementation assumes that the registers holding the ICIDs
> are universally big endian. That's no longer the case on newer
> platforms so update the code to take into account the endianness of
> each register.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>

Thanks,
Horia

[U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices

[Horia Geanta]

On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> Add ICID setup for the platform devices contained on this chip: usb,
> sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
> the format of the registers is different.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>

Thanks,
Horia

[U-Boot] [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices

[Horia Geanta]

On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> Add ICID setup for the platform devices contained on this chip: usb,
> sata, sdhc, edma, qdma, gpu, display and sec.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>

Thanks,
Horia

[U-Boot] [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Horia Geanta
> Sent: Wednesday, July 31, 2019 1:31 AM
> To: Laurentiu Tudor <laurentiu.tudor@nxp.com>; u-boot at lists.denx.de;
> Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Subject: Re: [PATCH 5/5] armv8: ls1028a: add icid setup for platform devices
> 
> On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >
> > Add ICID setup for the platform devices contained on this chip: usb,
> > sata, sdhc, edma, qdma, gpu, display and sec.
> >
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
> 

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk

[U-Boot] [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Horia Geanta
> Sent: Wednesday, July 31, 2019 1:28 AM
> To: Laurentiu Tudor <laurentiu.tudor@nxp.com>; u-boot at lists.denx.de;
> Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Subject: Re: [PATCH 4/5] armv8: ls1088a: add icid setup for platform devices
> 
> On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >
> > Add ICID setup for the platform devices contained on this chip: usb,
> > sata, sdhc, sec. The ICID macros for SEC needed to be adapted because
> > the format of the registers is different.
> >
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
> 

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk

[U-Boot] [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness aware

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Horia Geanta
> Sent: Wednesday, July 31, 2019 1:24 AM
> To: Laurentiu Tudor <laurentiu.tudor@nxp.com>; u-boot at lists.denx.de;
> Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Subject: Re: [PATCH 3/5] armv8: fsl-layerscape: make icid setup endianness
> aware
> 
> On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >
> > The current implementation assumes that the registers holding the
> > ICIDs are universally big endian. That's no longer the case on newer
> > platforms so update the code to take into account the endianness of
> > each register.
> >
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
> 


This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk

[U-Boot] [PATCH 2/5] armv8: fsl-layerscape: add base addresses for several devices

[Prabhakar Kushwaha]

> -----Original Message-----
> From: laurentiu.tudor at nxp.com <laurentiu.tudor@nxp.com>
> Sent: Tuesday, July 30, 2019 8:00 PM
> To: u-boot at lists.denx.de; Prabhakar Kushwaha
> <prabhakar.kushwaha@nxp.com>
> Cc: Horia Geanta <horia.geanta@nxp.com>; Laurentiu Tudor
> <laurentiu.tudor@nxp.com>
> Subject: [PATCH 2/5] armv8: fsl-layerscape: add base addresses for several
> devices
> 
> From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> 
> Add CCSR base addresses for ESDHC2, EDMA QDMA, DISPLAY and GPU
> devices.
> 
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk

[U-Boot] [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base address defines

[Prabhakar Kushwaha]

> -----Original Message-----
> From: Horia Geanta
> Sent: Wednesday, July 31, 2019 1:22 AM
> To: Laurentiu Tudor <laurentiu.tudor@nxp.com>; u-boot at lists.denx.de;
> Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> Subject: Re: [PATCH 1/5] armv8: fsl-layerscape: add missing sec jr base
> address defines
> 
> On 7/30/2019 5:30 PM, laurentiu.tudor at nxp.com wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> >
> > Add defines for all the SEC job rings base addresses.
> >
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
> Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
> 

This patch has been applied to fsl-qoriq master, awaiting upstream.

--pk