From: JC Kuo <jckuo@nvidia.com> To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>, <jonathanh@nvidia.com> Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <nkristam@nvidia.com>, <skomatineni@nvidia.com>, JC Kuo <jckuo@nvidia.com> Subject: [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support Date: Fri, 4 Oct 2019 16:19:34 +0800 [thread overview] Message-ID: <20191004081941.4831-1-jckuo@nvidia.com> (raw) Hi, This series introduces support for Tegra194 XUSB host and pad controller. Tegra194 XUSB host and pad controller are highly similar to the controllers found on Tegra186. Therefore, it's possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. JC Kuo (7): xhci: tegra: Parameterize mailbox register addresses usb: host: xhci-tegra: Add Tegra194 XHCI support phy: tegra: xusb: Protect Tegra186 soc with config phy: tegra: xusb: Add Tegra194 support dt-bindings: phy: tegra: Add Tegra194 support arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Enable XUSB host in P2972-0000 board .../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++ drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++----- drivers/phy/tegra/xusb.c | 7 + drivers/phy/tegra/xusb.h | 6 + drivers/usb/host/xhci-tegra.c | 88 +++++++++-- 9 files changed, 448 insertions(+), 51 deletions(-) -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: JC Kuo <jckuo@nvidia.com> To: gregkh@linuxfoundation.org, thierry.reding@gmail.com, jonathanh@nvidia.com Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, nkristam@nvidia.com, skomatineni@nvidia.com, JC Kuo <jckuo@nvidia.com> Subject: [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support Date: Fri, 4 Oct 2019 16:19:34 +0800 [thread overview] Message-ID: <20191004081941.4831-1-jckuo@nvidia.com> (raw) Hi, This series introduces support for Tegra194 XUSB host and pad controller. Tegra194 XUSB host and pad controller are highly similar to the controllers found on Tegra186. Therefore, it's possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194. JC Kuo (7): xhci: tegra: Parameterize mailbox register addresses usb: host: xhci-tegra: Add Tegra194 XHCI support phy: tegra: xusb: Protect Tegra186 soc with config phy: tegra: xusb: Add Tegra194 support dt-bindings: phy: tegra: Add Tegra194 support arm64: tegra: Add XUSB and pad controller on Tegra194 arm64: tegra: Enable XUSB host in P2972-0000 board .../phy/nvidia,tegra124-xusb-padctl.txt | 16 ++ .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 ++++++++ arch/arm64/boot/dts/nvidia/tegra194.dtsi | 139 +++++++++++++++++ drivers/phy/tegra/Makefile | 1 + drivers/phy/tegra/xusb-tegra186.c | 144 +++++++++++++----- drivers/phy/tegra/xusb.c | 7 + drivers/phy/tegra/xusb.h | 6 + drivers/usb/host/xhci-tegra.c | 88 +++++++++-- 9 files changed, 448 insertions(+), 51 deletions(-) -- 2.17.1
next reply other threads:[~2019-10-04 8:19 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-04 8:19 JC Kuo [this message] 2019-10-04 8:19 ` [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support JC Kuo 2019-10-04 8:19 ` [PATCH v2 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 5/7] dt-bindings: phy: tegra: " JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 8:19 ` [PATCH v2 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo 2019-10-04 8:19 ` JC Kuo 2019-10-04 12:23 ` [PATCH v2 0/7] add Tegra194 XUSB host and pad controller support Greg KH 2019-10-04 16:08 ` JC Kuo 2019-10-04 16:08 ` JC Kuo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191004081941.4831-1-jckuo@nvidia.com \ --to=jckuo@nvidia.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jonathanh@nvidia.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=nkristam@nvidia.com \ --cc=skomatineni@nvidia.com \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.