All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] arm64: kprobes: Drop open-coded exception fixup
@ 2019-10-17 15:31 ` Robin Murphy
  0 siblings, 0 replies; 4+ messages in thread
From: Robin Murphy @ 2019-10-17 15:31 UTC (permalink / raw)
  To: will, catalin.marinas
  Cc: mhiramat, james.morse, linux-arm-kernel, linux-kernel

The short-circuit call to fixup_exception() from kprobe_fault_handler()
poses a problem now that the former wants to consume the fault address
too, since the common kprobes API offers us no way to pass it through.
Fortunately, however, it works out to be unnecessary:

- uaccess instructions themselves are not probeable, so at most we
  should only ever expect to take a fixable fault from the pre or post
  handlers.
- the pre and post handler run with preemption disabled, thus for any
  fault they may cause, an unhandled return from kprobe_page_fault()
  will proceed directly to __do_kernel_fault() thanks to the
  faulthandler_disabled() check.
- __do_kernel_fault() will immediately call fixup_exception() unless
  we're in an EL1 instruction abort, and if we've somehow taken one of
  those on what we think is the middle of a uaccess routine, then the
  world is already very on fire.

Thus we can reasonably drop the call from kprobe_fault_handler() and
leave uaccess fixups to the regular flow.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 arch/arm64/kernel/probes/kprobes.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index c4452827419b..422fbd5c6c55 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -334,13 +334,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 		 */
 		if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
 			return 1;
-
-		/*
-		 * In case the user-specified fault handler returned
-		 * zero, try to fix up.
-		 */
-		if (fixup_exception(regs))
-			return 1;
 	}
 	return 0;
 }
-- 
2.21.0.dirty


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH] arm64: kprobes: Drop open-coded exception fixup
@ 2019-10-17 15:31 ` Robin Murphy
  0 siblings, 0 replies; 4+ messages in thread
From: Robin Murphy @ 2019-10-17 15:31 UTC (permalink / raw)
  To: will, catalin.marinas
  Cc: james.morse, mhiramat, linux-arm-kernel, linux-kernel

The short-circuit call to fixup_exception() from kprobe_fault_handler()
poses a problem now that the former wants to consume the fault address
too, since the common kprobes API offers us no way to pass it through.
Fortunately, however, it works out to be unnecessary:

- uaccess instructions themselves are not probeable, so at most we
  should only ever expect to take a fixable fault from the pre or post
  handlers.
- the pre and post handler run with preemption disabled, thus for any
  fault they may cause, an unhandled return from kprobe_page_fault()
  will proceed directly to __do_kernel_fault() thanks to the
  faulthandler_disabled() check.
- __do_kernel_fault() will immediately call fixup_exception() unless
  we're in an EL1 instruction abort, and if we've somehow taken one of
  those on what we think is the middle of a uaccess routine, then the
  world is already very on fire.

Thus we can reasonably drop the call from kprobe_fault_handler() and
leave uaccess fixups to the regular flow.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
---
 arch/arm64/kernel/probes/kprobes.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index c4452827419b..422fbd5c6c55 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -334,13 +334,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 		 */
 		if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
 			return 1;
-
-		/*
-		 * In case the user-specified fault handler returned
-		 * zero, try to fix up.
-		 */
-		if (fixup_exception(regs))
-			return 1;
 	}
 	return 0;
 }
-- 
2.21.0.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: kprobes: Drop open-coded exception fixup
  2019-10-17 15:31 ` Robin Murphy
@ 2019-10-21  8:49   ` Masami Hiramatsu
  -1 siblings, 0 replies; 4+ messages in thread
From: Masami Hiramatsu @ 2019-10-21  8:49 UTC (permalink / raw)
  To: Robin Murphy
  Cc: will, catalin.marinas, mhiramat, james.morse, linux-arm-kernel,
	linux-kernel

Hi Robin,

On Thu, 17 Oct 2019 16:31:42 +0100
Robin Murphy <robin.murphy@arm.com> wrote:

> The short-circuit call to fixup_exception() from kprobe_fault_handler()
> poses a problem now that the former wants to consume the fault address
> too, since the common kprobes API offers us no way to pass it through.
> Fortunately, however, it works out to be unnecessary:

Thank you for pointing it out!

> 
> - uaccess instructions themselves are not probeable, so at most we
>   should only ever expect to take a fixable fault from the pre or post
>   handlers.

Right. If it is not fixable, we should handle it as a kernel bug.
(to avoid it we can use probe_kernel_read() in kprobe handler)

> - the pre and post handler run with preemption disabled, thus for any
>   fault they may cause, an unhandled return from kprobe_page_fault()
>   will proceed directly to __do_kernel_fault() thanks to the
>   faulthandler_disabled() check.

OK, this is reasonable.

> - __do_kernel_fault() will immediately call fixup_exception() unless
>   we're in an EL1 instruction abort, and if we've somehow taken one of
>   those on what we think is the middle of a uaccess routine, then the
>   world is already very on fire.

OK, this looks good to me.

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Thank you!

> 
> Thus we can reasonably drop the call from kprobe_fault_handler() and
> leave uaccess fixups to the regular flow.
> 
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
> ---
>  arch/arm64/kernel/probes/kprobes.c | 7 -------
>  1 file changed, 7 deletions(-)
> 
> diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
> index c4452827419b..422fbd5c6c55 100644
> --- a/arch/arm64/kernel/probes/kprobes.c
> +++ b/arch/arm64/kernel/probes/kprobes.c
> @@ -334,13 +334,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
>  		 */
>  		if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
>  			return 1;
> -
> -		/*
> -		 * In case the user-specified fault handler returned
> -		 * zero, try to fix up.
> -		 */
> -		if (fixup_exception(regs))
> -			return 1;
>  	}
>  	return 0;
>  }
> -- 
> 2.21.0.dirty
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH] arm64: kprobes: Drop open-coded exception fixup
@ 2019-10-21  8:49   ` Masami Hiramatsu
  0 siblings, 0 replies; 4+ messages in thread
From: Masami Hiramatsu @ 2019-10-21  8:49 UTC (permalink / raw)
  To: Robin Murphy
  Cc: catalin.marinas, linux-kernel, james.morse, mhiramat, will,
	linux-arm-kernel

Hi Robin,

On Thu, 17 Oct 2019 16:31:42 +0100
Robin Murphy <robin.murphy@arm.com> wrote:

> The short-circuit call to fixup_exception() from kprobe_fault_handler()
> poses a problem now that the former wants to consume the fault address
> too, since the common kprobes API offers us no way to pass it through.
> Fortunately, however, it works out to be unnecessary:

Thank you for pointing it out!

> 
> - uaccess instructions themselves are not probeable, so at most we
>   should only ever expect to take a fixable fault from the pre or post
>   handlers.

Right. If it is not fixable, we should handle it as a kernel bug.
(to avoid it we can use probe_kernel_read() in kprobe handler)

> - the pre and post handler run with preemption disabled, thus for any
>   fault they may cause, an unhandled return from kprobe_page_fault()
>   will proceed directly to __do_kernel_fault() thanks to the
>   faulthandler_disabled() check.

OK, this is reasonable.

> - __do_kernel_fault() will immediately call fixup_exception() unless
>   we're in an EL1 instruction abort, and if we've somehow taken one of
>   those on what we think is the middle of a uaccess routine, then the
>   world is already very on fire.

OK, this looks good to me.

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>

Thank you!

> 
> Thus we can reasonably drop the call from kprobe_fault_handler() and
> leave uaccess fixups to the regular flow.
> 
> Signed-off-by: Robin Murphy <robin.murphy@arm.com>
> ---
>  arch/arm64/kernel/probes/kprobes.c | 7 -------
>  1 file changed, 7 deletions(-)
> 
> diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
> index c4452827419b..422fbd5c6c55 100644
> --- a/arch/arm64/kernel/probes/kprobes.c
> +++ b/arch/arm64/kernel/probes/kprobes.c
> @@ -334,13 +334,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
>  		 */
>  		if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
>  			return 1;
> -
> -		/*
> -		 * In case the user-specified fault handler returned
> -		 * zero, try to fix up.
> -		 */
> -		if (fixup_exception(regs))
> -			return 1;
>  	}
>  	return 0;
>  }
> -- 
> 2.21.0.dirty
> 


-- 
Masami Hiramatsu <mhiramat@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-10-21  8:49 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-17 15:31 [PATCH] arm64: kprobes: Drop open-coded exception fixup Robin Murphy
2019-10-17 15:31 ` Robin Murphy
2019-10-21  8:49 ` Masami Hiramatsu
2019-10-21  8:49   ` Masami Hiramatsu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.