All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Delaunay <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 3/5] usb: host: dwc2: add clk support
Date: Tue, 12 Nov 2019 10:42:12 +0100	[thread overview]
Message-ID: <20191112094214.12686-4-patrick.delaunay@st.com> (raw)
In-Reply-To: <20191112094214.12686-1-patrick.delaunay@st.com>

Add support for clock with driver model.

This patch don't added dependency because when CONFIG_CLK
is not activated the clk function are stubbed.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---

Changes in v3: None
Changes in v2: None

 drivers/usb/host/dwc2.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
index cb2b381eb6..9a00bea24f 100644
--- a/drivers/usb/host/dwc2.c
+++ b/drivers/usb/host/dwc2.c
@@ -5,13 +5,14 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <errno.h>
 #include <generic-phy.h>
-#include <usb.h>
 #include <malloc.h>
 #include <memalign.h>
 #include <phys2bus.h>
+#include <usb.h>
 #include <usbroothubdes.h>
 #include <wait_bit.h>
 #include <asm/io.h>
@@ -37,6 +38,7 @@ struct dwc2_priv {
 	struct udevice *vbus_supply;
 #endif
 	struct phy phy;
+	struct clk_bulk clks;
 #else
 	uint8_t *aligned_buffer;
 	uint8_t *status_buffer;
@@ -1375,6 +1377,26 @@ static int dwc2_shutdown_phy(struct udevice *dev)
 	return 0;
 }
 
+static int dwc2_clk_init(struct udevice *dev)
+{
+	struct dwc2_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	ret = clk_get_bulk(dev, &priv->clks);
+	if (ret == -ENOSYS || ret == -ENOENT)
+		return 0;
+	if (ret)
+		return ret;
+
+	ret = clk_enable_bulk(&priv->clks);
+	if (ret) {
+		clk_release_bulk(&priv->clks);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int dwc2_usb_probe(struct udevice *dev)
 {
 	struct dwc2_priv *priv = dev_get_priv(dev);
@@ -1383,6 +1405,10 @@ static int dwc2_usb_probe(struct udevice *dev)
 
 	bus_priv->desc_before_addr = true;
 
+	ret = dwc2_clk_init(dev);
+	if (ret)
+		return ret;
+
 	ret = dwc2_setup_phy(dev);
 	if (ret)
 		return ret;
@@ -1408,6 +1434,8 @@ static int dwc2_usb_remove(struct udevice *dev)
 	dwc2_uninit_common(priv->regs);
 
 	reset_release_bulk(&priv->resets);
+	clk_disable_bulk(&priv->clks);
+	clk_release_bulk(&priv->clks);
 
 	return 0;
 }
-- 
2.17.1

  parent reply	other threads:[~2019-11-12  9:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-12  9:42 [U-Boot] [PATCH v3 0/5] usb: host: dwc2: use driver model for PHY and CLOCK Patrick Delaunay
2019-11-12  9:42 ` [U-Boot] [PATCH v3 1/5] dm: clk: add stub for clk_disable_bulk when CONFIG_CLK is desactivated Patrick Delaunay
2019-11-12 10:16   ` Jean-Jacques Hiblot
2019-11-12 15:47     ` Patrick DELAUNAY
2019-11-12 10:40   ` Simon Goldschmidt
2019-11-20 10:04     ` Patrick DELAUNAY
2019-11-12  9:42 ` [U-Boot] [PATCH v3 2/5] usb: host: dwc2: add phy support Patrick Delaunay
2019-11-12  9:42 ` Patrick Delaunay [this message]
2019-11-12  9:42 ` [U-Boot] [PATCH v3 4/5] usb: host: dwc2: force reset assert Patrick Delaunay
2019-11-12  9:42 ` [U-Boot] [PATCH v3 5/5] usb: host: dwc2: add trace to have clean usb start Patrick Delaunay
2020-02-14 13:34 ` [PATCH v3 0/5] usb: host: dwc2: use driver model for PHY and CLOCK Patrick DELAUNAY
2020-02-14 18:29   ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191112094214.12686-4-patrick.delaunay@st.com \
    --to=patrick.delaunay@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.