All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com, maz@kernel.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: drjones@redhat.com, andrew.murray@arm.com,
	andre.przywara@arm.com, peter.maydell@linaro.org
Subject: [kvm-unit-tests RFC 09/10] arm/arm64: gic: Introduce setup_irq() helper
Date: Fri,  6 Dec 2019 18:27:23 +0100	[thread overview]
Message-ID: <20191206172724.947-10-eric.auger@redhat.com> (raw)
In-Reply-To: <20191206172724.947-1-eric.auger@redhat.com>

ipi_enable() code would be reusable for other interrupts
than IPI. Let's rename it setup_irq() and pass an interrupt
handler pointer. We also export it to use it in other tests
such as the PMU's one.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
 arm/gic.c         | 24 +++---------------------
 lib/arm/asm/gic.h |  3 +++
 lib/arm/gic.c     | 11 +++++++++++
 3 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/arm/gic.c b/arm/gic.c
index adb6aa4..04919ae 100644
--- a/arm/gic.c
+++ b/arm/gic.c
@@ -215,20 +215,9 @@ static void ipi_test_smp(void)
 	report_prefix_pop();
 }
 
-static void ipi_enable(void)
-{
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_handler);
-#endif
-	local_irq_enable();
-}
-
 static void ipi_send(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	wait_on_ready();
 	ipi_test_self();
 	ipi_test_smp();
@@ -238,7 +227,7 @@ static void ipi_send(void)
 
 static void ipi_recv(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	cpumask_set_cpu(smp_processor_id(), &ready);
 	while (1)
 		wfi();
@@ -295,14 +284,7 @@ static void ipi_clear_active_handler(struct pt_regs *regs __unused)
 static void run_active_clear_test(void)
 {
 	report_prefix_push("active");
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_clear_active_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_clear_active_handler);
-#endif
-	local_irq_enable();
-
+	setup_irq(ipi_clear_active_handler);
 	ipi_test_self();
 	report_prefix_pop();
 }
diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
index 21cdb58..55dd84b 100644
--- a/lib/arm/asm/gic.h
+++ b/lib/arm/asm/gic.h
@@ -82,5 +82,8 @@ void gic_set_irq_target(int irq, int cpu);
 void gic_set_irq_group(int irq, int group);
 int gic_get_irq_group(int irq);
 
+typedef void (*handler_t)(struct pt_regs *regs __unused);
+extern void setup_irq(handler_t handler);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_H_ */
diff --git a/lib/arm/gic.c b/lib/arm/gic.c
index aa9cb86..0c5511f 100644
--- a/lib/arm/gic.c
+++ b/lib/arm/gic.c
@@ -236,3 +236,14 @@ int gic_get_irq_group(int irq)
 {
 	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
 }
+
+void setup_irq(handler_t handler)
+{
+        gic_enable_defaults();
+#ifdef __arm__
+        install_exception_handler(EXCPTN_IRQ, handler);
+#else
+        install_irq_handler(EL1H_IRQ, handler);
+#endif
+        local_irq_enable();
+}
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com, maz@kernel.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: peter.maydell@linaro.org, andrew.murray@arm.com,
	drjones@redhat.com, andre.przywara@arm.com
Subject: [kvm-unit-tests RFC 09/10] arm/arm64: gic: Introduce setup_irq() helper
Date: Fri,  6 Dec 2019 18:27:23 +0100	[thread overview]
Message-ID: <20191206172724.947-10-eric.auger@redhat.com> (raw)
In-Reply-To: <20191206172724.947-1-eric.auger@redhat.com>

ipi_enable() code would be reusable for other interrupts
than IPI. Let's rename it setup_irq() and pass an interrupt
handler pointer. We also export it to use it in other tests
such as the PMU's one.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
 arm/gic.c         | 24 +++---------------------
 lib/arm/asm/gic.h |  3 +++
 lib/arm/gic.c     | 11 +++++++++++
 3 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/arm/gic.c b/arm/gic.c
index adb6aa4..04919ae 100644
--- a/arm/gic.c
+++ b/arm/gic.c
@@ -215,20 +215,9 @@ static void ipi_test_smp(void)
 	report_prefix_pop();
 }
 
-static void ipi_enable(void)
-{
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_handler);
-#endif
-	local_irq_enable();
-}
-
 static void ipi_send(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	wait_on_ready();
 	ipi_test_self();
 	ipi_test_smp();
@@ -238,7 +227,7 @@ static void ipi_send(void)
 
 static void ipi_recv(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	cpumask_set_cpu(smp_processor_id(), &ready);
 	while (1)
 		wfi();
@@ -295,14 +284,7 @@ static void ipi_clear_active_handler(struct pt_regs *regs __unused)
 static void run_active_clear_test(void)
 {
 	report_prefix_push("active");
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_clear_active_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_clear_active_handler);
-#endif
-	local_irq_enable();
-
+	setup_irq(ipi_clear_active_handler);
 	ipi_test_self();
 	report_prefix_pop();
 }
diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
index 21cdb58..55dd84b 100644
--- a/lib/arm/asm/gic.h
+++ b/lib/arm/asm/gic.h
@@ -82,5 +82,8 @@ void gic_set_irq_target(int irq, int cpu);
 void gic_set_irq_group(int irq, int group);
 int gic_get_irq_group(int irq);
 
+typedef void (*handler_t)(struct pt_regs *regs __unused);
+extern void setup_irq(handler_t handler);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_H_ */
diff --git a/lib/arm/gic.c b/lib/arm/gic.c
index aa9cb86..0c5511f 100644
--- a/lib/arm/gic.c
+++ b/lib/arm/gic.c
@@ -236,3 +236,14 @@ int gic_get_irq_group(int irq)
 {
 	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
 }
+
+void setup_irq(handler_t handler)
+{
+        gic_enable_defaults();
+#ifdef __arm__
+        install_exception_handler(EXCPTN_IRQ, handler);
+#else
+        install_irq_handler(EL1H_IRQ, handler);
+#endif
+        local_irq_enable();
+}
-- 
2.20.1



WARNING: multiple messages have this Message-ID (diff)
From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com, maz@kernel.org,
	kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org,
	qemu-devel@nongnu.org, qemu-arm@nongnu.org
Cc: andre.przywara@arm.com
Subject: [kvm-unit-tests RFC 09/10] arm/arm64: gic: Introduce setup_irq() helper
Date: Fri,  6 Dec 2019 18:27:23 +0100	[thread overview]
Message-ID: <20191206172724.947-10-eric.auger@redhat.com> (raw)
In-Reply-To: <20191206172724.947-1-eric.auger@redhat.com>

ipi_enable() code would be reusable for other interrupts
than IPI. Let's rename it setup_irq() and pass an interrupt
handler pointer. We also export it to use it in other tests
such as the PMU's one.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
 arm/gic.c         | 24 +++---------------------
 lib/arm/asm/gic.h |  3 +++
 lib/arm/gic.c     | 11 +++++++++++
 3 files changed, 17 insertions(+), 21 deletions(-)

diff --git a/arm/gic.c b/arm/gic.c
index adb6aa4..04919ae 100644
--- a/arm/gic.c
+++ b/arm/gic.c
@@ -215,20 +215,9 @@ static void ipi_test_smp(void)
 	report_prefix_pop();
 }
 
-static void ipi_enable(void)
-{
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_handler);
-#endif
-	local_irq_enable();
-}
-
 static void ipi_send(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	wait_on_ready();
 	ipi_test_self();
 	ipi_test_smp();
@@ -238,7 +227,7 @@ static void ipi_send(void)
 
 static void ipi_recv(void)
 {
-	ipi_enable();
+	setup_irq(ipi_handler);
 	cpumask_set_cpu(smp_processor_id(), &ready);
 	while (1)
 		wfi();
@@ -295,14 +284,7 @@ static void ipi_clear_active_handler(struct pt_regs *regs __unused)
 static void run_active_clear_test(void)
 {
 	report_prefix_push("active");
-	gic_enable_defaults();
-#ifdef __arm__
-	install_exception_handler(EXCPTN_IRQ, ipi_clear_active_handler);
-#else
-	install_irq_handler(EL1H_IRQ, ipi_clear_active_handler);
-#endif
-	local_irq_enable();
-
+	setup_irq(ipi_clear_active_handler);
 	ipi_test_self();
 	report_prefix_pop();
 }
diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
index 21cdb58..55dd84b 100644
--- a/lib/arm/asm/gic.h
+++ b/lib/arm/asm/gic.h
@@ -82,5 +82,8 @@ void gic_set_irq_target(int irq, int cpu);
 void gic_set_irq_group(int irq, int group);
 int gic_get_irq_group(int irq);
 
+typedef void (*handler_t)(struct pt_regs *regs __unused);
+extern void setup_irq(handler_t handler);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASMARM_GIC_H_ */
diff --git a/lib/arm/gic.c b/lib/arm/gic.c
index aa9cb86..0c5511f 100644
--- a/lib/arm/gic.c
+++ b/lib/arm/gic.c
@@ -236,3 +236,14 @@ int gic_get_irq_group(int irq)
 {
 	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
 }
+
+void setup_irq(handler_t handler)
+{
+        gic_enable_defaults();
+#ifdef __arm__
+        install_exception_handler(EXCPTN_IRQ, handler);
+#else
+        install_irq_handler(EL1H_IRQ, handler);
+#endif
+        local_irq_enable();
+}
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2019-12-06 17:28 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-06 17:27 [kvm-unit-tests RFC 00/10] KVM: arm64: PMUv3 Event Counter Tests Eric Auger
2019-12-06 17:27 ` Eric Auger
2019-12-06 17:27 ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 01/10] arm64: Provide read/write_sysreg_s Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:36   ` Alexandru Elisei
2019-12-06 17:36     ` Alexandru Elisei
2019-12-06 17:36     ` Alexandru Elisei
2019-12-06 17:27 ` [kvm-unit-tests RFC 02/10] pmu: Let pmu tests take a sub-test parameter Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 03/10] pmu: Add a pmu struct Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-13 18:59   ` Andrew Jones
2019-12-13 18:59     ` Andrew Jones
2019-12-13 18:59     ` Andrew Jones
2019-12-06 17:27 ` [kvm-unit-tests RFC 04/10] pmu: Check Required Event Support Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-13 19:10   ` Andrew Jones
2019-12-13 19:10     ` Andrew Jones
2019-12-13 19:10     ` Andrew Jones
2019-12-06 17:27 ` [kvm-unit-tests RFC 05/10] pmu: Basic event counter Tests Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 06/10] pmu: Test chained counter Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 07/10] arm: pmu: test 32-bit <-> 64-bit transitions Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 08/10] arm: gic: Provide per-IRQ helper functions Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` Eric Auger [this message]
2019-12-06 17:27   ` [kvm-unit-tests RFC 09/10] arm/arm64: gic: Introduce setup_irq() helper Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27 ` [kvm-unit-tests RFC 10/10] pmu: Test overflow interrupts Eric Auger
2019-12-06 17:27   ` Eric Auger
2019-12-06 17:27   ` Eric Auger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191206172724.947-10-eric.auger@redhat.com \
    --to=eric.auger@redhat.com \
    --cc=andre.przywara@arm.com \
    --cc=andrew.murray@arm.com \
    --cc=drjones@redhat.com \
    --cc=eric.auger.pro@gmail.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=maz@kernel.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.