From: Remi Pommarel <repk@triplefau.lt> To: Kishon Vijay Abraham I <kishon@ti.com>, Yue Wang <yue.wang@Amlogic.com>, Kevin Hilman <khilman@baylibre.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Bjorn Helgaas <bhelgaas@google.com>, Neil Armstrong <narmstrong@baylibre.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, Rob Herring <robh+dt@kernel.org> Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Remi Pommarel <repk@triplefau.lt> Subject: [PATCH v4 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes Date: Wed, 15 Jan 2020 13:29:05 +0100 [thread overview] Message-ID: <20200115122908.16954-5-repk@triplefau.lt> (raw) In-Reply-To: <20200115122908.16954-1-repk@triplefau.lt> Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE reliable on AXG SoC. Signed-off-by: Remi Pommarel <repk@triplefau.lt> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04803c3bccfa..d5c3885d4b14 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1104,6 +1104,12 @@ hiubus: bus@ff63c000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + mpphy: phy@0 { + compatible = "amlogic,axg-mipi-pcie-phy"; + reg = <0x0 0x0 0x0 0xc>; + #phy-cells = <1>; + }; + sysctrl: system-controller@0 { compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon"; @@ -1356,6 +1362,13 @@ tdmout_c: audio-controller@580 { }; }; + pcie_phy: bus@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + #phy-cells = <0>; + }; + aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Remi Pommarel <repk@triplefau.lt> To: Kishon Vijay Abraham I <kishon@ti.com>, Yue Wang <yue.wang@Amlogic.com>, Kevin Hilman <khilman@baylibre.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>, Bjorn Helgaas <bhelgaas@google.com>, Neil Armstrong <narmstrong@baylibre.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, Rob Herring <robh+dt@kernel.org> Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, Remi Pommarel <repk@triplefau.lt>, linux-kernel@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH v4 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes Date: Wed, 15 Jan 2020 13:29:05 +0100 [thread overview] Message-ID: <20200115122908.16954-5-repk@triplefau.lt> (raw) In-Reply-To: <20200115122908.16954-1-repk@triplefau.lt> Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE reliable on AXG SoC. Signed-off-by: Remi Pommarel <repk@triplefau.lt> --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04803c3bccfa..d5c3885d4b14 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -1104,6 +1104,12 @@ hiubus: bus@ff63c000 { #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; + mpphy: phy@0 { + compatible = "amlogic,axg-mipi-pcie-phy"; + reg = <0x0 0x0 0x0 0xc>; + #phy-cells = <1>; + }; + sysctrl: system-controller@0 { compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon"; @@ -1356,6 +1362,13 @@ tdmout_c: audio-controller@580 { }; }; + pcie_phy: bus@ff644000 { + compatible = "amlogic,axg-pcie-phy"; + reg = <0x0 0xff644000 0x0 0x1c>; + resets = <&reset RESET_PCIE_PHY>; + #phy-cells = <0>; + }; + aobus: bus@ff800000 { compatible = "simple-bus"; reg = <0x0 0xff800000 0x0 0x100000>; -- 2.24.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-01-15 12:22 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-15 12:29 [PATCH v4 0/7] PCI: amlogic: Make PCIe working reliably on AXG platforms Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:29 ` [PATCH v4 1/7] dt-bindings: Add AXG PCIE PHY bindings Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:29 ` [PATCH v4 2/7] dt-bindings: Add AXG shared MIPI/PCIE " Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-21 23:05 ` Rob Herring 2020-01-21 23:05 ` Rob Herring 2020-01-21 23:08 ` Rob Herring 2020-01-21 23:08 ` Rob Herring 2020-01-15 12:29 ` [PATCH v4 3/7] dt-bindings: PCI: meson: Update PCIE bindings documentation Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel [this message] 2020-01-15 12:29 ` [PATCH v4 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes Remi Pommarel 2020-01-15 12:29 ` [PATCH v4 5/7] phy: amlogic: Add Amlogic AXG MIPI/PCIE PHY Driver Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:29 ` [PATCH v4 6/7] phy: amlogic: Add Amlogic AXG PCIE " Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:29 ` [PATCH v4 7/7] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs Remi Pommarel 2020-01-15 12:29 ` Remi Pommarel 2020-01-15 12:30 ` Neil Armstrong 2020-01-15 12:30 ` Neil Armstrong 2020-01-15 13:40 ` Remi Pommarel 2020-01-15 13:40 ` Remi Pommarel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200115122908.16954-5-repk@triplefau.lt \ --to=repk@triplefau.lt \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=jbrunet@baylibre.com \ --cc=khilman@baylibre.com \ --cc=kishon@ti.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=lorenzo.pieralisi@arm.com \ --cc=martin.blumenstingl@googlemail.com \ --cc=narmstrong@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=yue.wang@Amlogic.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.