From: Ong Boon Leong <boon.leong.ong@intel.com> To: netdev@vger.kernel.org Cc: Tan Tee Min <tee.min.tan@intel.com>, Voon Weifeng <weifeng.voon@intel.com>, Giuseppe Cavallaro <peppe.cavallaro@st.com>, Alexandre TORGUE <alexandre.torgue@st.com>, Jose Abreu <Jose.Abreu@synopsys.com>, "David S . Miller" <davem@davemloft.net>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Joao Pinto <Joao.Pinto@synopsys.com>, Arnd Bergmann <arnd@arndb.de>, Alexandru Ardelean <alexandru.ardelean@analog.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH net v4 6/6] net: stmmac: update pci platform data to use phy_interface Date: Wed, 5 Feb 2020 16:55:10 +0800 [thread overview] Message-ID: <20200205085510.32353-7-boon.leong.ong@intel.com> (raw) In-Reply-To: <20200205085510.32353-1-boon.leong.ong@intel.com> From: Voon Weifeng <weifeng.voon@intel.com> The recent patch to support passive mode converter did not take care the phy interface configuration in PCI platform data. Hence, converting all the PCI platform data from plat->interface to plat->phy_interface as the default mode is meant for PHY. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Tested-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 623521052152..fe2c9fa6a71c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -95,7 +95,7 @@ static int stmmac_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; @@ -217,7 +217,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + return ehl_common_data(pdev, plat); } @@ -230,7 +231,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_RGMII; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + return ehl_common_data(pdev, plat); } @@ -258,7 +260,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; return tgl_common_data(pdev, plat); } @@ -358,7 +360,7 @@ static int quark_default_data(struct pci_dev *pdev, plat->bus_id = pci_dev_id(pdev); plat->phy_addr = ret; - plat->interface = PHY_INTERFACE_MODE_RMII; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; plat->dma_cfg->pbl = 16; plat->dma_cfg->pblx8 = true; @@ -415,7 +417,7 @@ static int snps_gmac5_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = -1; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ong Boon Leong <boon.leong.ong@intel.com> To: netdev@vger.kernel.org Cc: Jose Abreu <Jose.Abreu@synopsys.com>, Joao Pinto <Joao.Pinto@synopsys.com>, Alexandre TORGUE <alexandre.torgue@st.com>, Voon Weifeng <weifeng.voon@intel.com>, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, Arnd Bergmann <arnd@arndb.de>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Tan Tee Min <tee.min.tan@intel.com>, Giuseppe Cavallaro <peppe.cavallaro@st.com>, Alexandru Ardelean <alexandru.ardelean@analog.com>, "David S . Miller" <davem@davemloft.net>, linux-arm-kernel@lists.infradead.org Subject: [PATCH net v4 6/6] net: stmmac: update pci platform data to use phy_interface Date: Wed, 5 Feb 2020 16:55:10 +0800 [thread overview] Message-ID: <20200205085510.32353-7-boon.leong.ong@intel.com> (raw) In-Reply-To: <20200205085510.32353-1-boon.leong.ong@intel.com> From: Voon Weifeng <weifeng.voon@intel.com> The recent patch to support passive mode converter did not take care the phy interface configuration in PCI platform data. Hence, converting all the PCI platform data from plat->interface to plat->phy_interface as the default mode is meant for PHY. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Tested-by: Tan, Tee Min <tee.min.tan@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> --- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 623521052152..fe2c9fa6a71c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -95,7 +95,7 @@ static int stmmac_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; @@ -217,7 +217,8 @@ static int ehl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; + return ehl_common_data(pdev, plat); } @@ -230,7 +231,8 @@ static int ehl_rgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_RGMII; + plat->phy_interface = PHY_INTERFACE_MODE_RGMII; + return ehl_common_data(pdev, plat); } @@ -258,7 +260,7 @@ static int tgl_sgmii_data(struct pci_dev *pdev, { plat->bus_id = 1; plat->phy_addr = 0; - plat->interface = PHY_INTERFACE_MODE_SGMII; + plat->phy_interface = PHY_INTERFACE_MODE_SGMII; return tgl_common_data(pdev, plat); } @@ -358,7 +360,7 @@ static int quark_default_data(struct pci_dev *pdev, plat->bus_id = pci_dev_id(pdev); plat->phy_addr = ret; - plat->interface = PHY_INTERFACE_MODE_RMII; + plat->phy_interface = PHY_INTERFACE_MODE_RMII; plat->dma_cfg->pbl = 16; plat->dma_cfg->pblx8 = true; @@ -415,7 +417,7 @@ static int snps_gmac5_default_data(struct pci_dev *pdev, plat->bus_id = 1; plat->phy_addr = -1; - plat->interface = PHY_INTERFACE_MODE_GMII; + plat->phy_interface = PHY_INTERFACE_MODE_GMII; plat->dma_cfg->pbl = 32; plat->dma_cfg->pblx8 = true; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-05 8:55 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-05 8:55 [PATCH net v4 0/6] net: stmmac: general fixes for Ethernet functionality Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 8:55 ` [PATCH net v4 1/6] net: stmmac: Fix incorrect location to set real_num_rx|tx_queues Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 13:39 ` David Miller 2020-02-05 13:39 ` David Miller 2020-02-07 7:21 ` Ong, Boon Leong 2020-02-07 7:21 ` Ong, Boon Leong 2020-02-05 8:55 ` [PATCH net v4 2/6] net: stmmac: fix incorrect GMAC_VLAN_TAG register writting in GMAC4+ Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 8:55 ` [PATCH net v4 3/6] net: stmmac: xgmac: fix incorrect XGMAC_VLAN_TAG register writting Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 8:55 ` [PATCH net v4 4/6] net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 8:55 ` [PATCH net v4 5/6] net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong 2020-02-05 8:55 ` Ong Boon Leong [this message] 2020-02-05 8:55 ` [PATCH net v4 6/6] net: stmmac: update pci platform data to use phy_interface Ong Boon Leong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200205085510.32353-7-boon.leong.ong@intel.com \ --to=boon.leong.ong@intel.com \ --cc=Joao.Pinto@synopsys.com \ --cc=Jose.Abreu@synopsys.com \ --cc=alexandre.torgue@st.com \ --cc=alexandru.ardelean@analog.com \ --cc=arnd@arndb.de \ --cc=davem@davemloft.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=peppe.cavallaro@st.com \ --cc=tee.min.tan@intel.com \ --cc=weifeng.voon@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.