* [RFC] Buildfailure due to mising "select REGMAP_I2C"
@ 2020-02-24 22:35 Ian Kumlien
2020-02-25 7:51 ` Sakari Ailus
0 siblings, 1 reply; 6+ messages in thread
From: Ian Kumlien @ 2020-02-24 22:35 UTC (permalink / raw)
To: hverkuil-cisco, petrcvekcz, sakari.ailus, Ricardo Ribalda Delgado, leonl
Cc: linux-media
[-- Attachment #1: Type: text/plain, Size: 2602 bytes --]
Hi,
I got surprised by:
ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe':
tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c'
make: *** [Makefile:1078: vmlinux] Error 1
When going from 5.5.2 -> 5.5.6
A quick git grep shows that something like this might be needed, but
it should be verified.
I'm really uncertain about the ones that say REGMAP_SCCB...
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c68e002d26ea..fc40c111f461 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -238,6 +238,7 @@ config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
select HDMI
select V4L2_FWNODE
help
@@ -379,6 +380,7 @@ config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
+ select REGMAP_I2C
help
Support for the Texas Instruments TVP5150 video decoder.
@@ -584,6 +586,7 @@ config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on V4L2_FWNODE
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the Sony
IMX214 camera.
@@ -612,6 +615,7 @@ config VIDEO_IMX274
config VIDEO_IMX290
tristate "Sony IMX290 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Sony
@@ -774,6 +778,7 @@ config VIDEO_OV7251
config VIDEO_OV772X
tristate "OmniVision OV772x sensor support"
depends on I2C && VIDEO_V4L2
+ select REGMAP_I2C
select REGMAP_SCCB
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -804,6 +809,7 @@ config VIDEO_OV7670
config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
depends on I2C && VIDEO_V4L2
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
@@ -829,6 +835,7 @@ config VIDEO_OV9640
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
select REGMAP_SCCB
help
This is a V4L2 sensor driver for the Omnivision
[-- Attachment #2: rfc-select-regmap_i2c.diff --]
[-- Type: text/x-patch, Size: 1949 bytes --]
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c68e002d26ea..fc40c111f461 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -238,6 +238,7 @@ config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
select HDMI
select V4L2_FWNODE
help
@@ -379,6 +380,7 @@ config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
+ select REGMAP_I2C
help
Support for the Texas Instruments TVP5150 video decoder.
@@ -584,6 +586,7 @@ config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on V4L2_FWNODE
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the Sony
IMX214 camera.
@@ -612,6 +615,7 @@ config VIDEO_IMX274
config VIDEO_IMX290
tristate "Sony IMX290 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Sony
@@ -774,6 +778,7 @@ config VIDEO_OV7251
config VIDEO_OV772X
tristate "OmniVision OV772x sensor support"
depends on I2C && VIDEO_V4L2
+ select REGMAP_I2C
select REGMAP_SCCB
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -804,6 +809,7 @@ config VIDEO_OV7670
config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
depends on I2C && VIDEO_V4L2
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
@@ -829,6 +835,7 @@ config VIDEO_OV9640
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
select REGMAP_SCCB
help
This is a V4L2 sensor driver for the Omnivision
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [RFC] Buildfailure due to mising "select REGMAP_I2C"
2020-02-24 22:35 [RFC] Buildfailure due to mising "select REGMAP_I2C" Ian Kumlien
@ 2020-02-25 7:51 ` Sakari Ailus
2020-02-25 7:56 ` Ian Kumlien
0 siblings, 1 reply; 6+ messages in thread
From: Sakari Ailus @ 2020-02-25 7:51 UTC (permalink / raw)
To: Ian Kumlien
Cc: hverkuil-cisco, petrcvekcz, Ricardo Ribalda Delgado, leonl, linux-media
Hi Ian,
Thank you for the patch.
On Mon, Feb 24, 2020 at 11:35:54PM +0100, Ian Kumlien wrote:
> Hi,
>
> I got surprised by:
> ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe':
> tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c'
> make: *** [Makefile:1078: vmlinux] Error 1
>
> When going from 5.5.2 -> 5.5.6
>
> A quick git grep shows that something like this might be needed, but
> it should be verified.
> I'm really uncertain about the ones that say REGMAP_SCCB...
Those don't need REGMAP_I2C for they use SCCB.
Please also do not send attachments; your mail is likely consumed by some
list servers that way.
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index c68e002d26ea..fc40c111f461 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -238,6 +238,7 @@ config VIDEO_ADV7604
> tristate "Analog Devices ADV7604 decoder"
> depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
> depends on GPIOLIB || COMPILE_TEST
> + select REGMAP_I2C
> select HDMI
> select V4L2_FWNODE
> help
> @@ -379,6 +380,7 @@ config VIDEO_TVP5150
> tristate "Texas Instruments TVP5150 video decoder"
> depends on VIDEO_V4L2 && I2C
> select V4L2_FWNODE
> + select REGMAP_I2C
> help
> Support for the Texas Instruments TVP5150 video decoder.
>
> @@ -584,6 +586,7 @@ config VIDEO_IMX214
> tristate "Sony IMX214 sensor support"
> depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> depends on V4L2_FWNODE
> + select REGMAP_I2C
> help
> This is a Video4Linux2 sensor driver for the Sony
> IMX214 camera.
> @@ -612,6 +615,7 @@ config VIDEO_IMX274
> config VIDEO_IMX290
> tristate "Sony IMX290 sensor support"
> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + select REGMAP_I2C
> select V4L2_FWNODE
> help
> This is a Video4Linux2 sensor driver for the Sony
> @@ -774,6 +778,7 @@ config VIDEO_OV7251
> config VIDEO_OV772X
> tristate "OmniVision OV772x sensor support"
> depends on I2C && VIDEO_V4L2
> + select REGMAP_I2C
So this isn't needed.
> select REGMAP_SCCB
> help
> This is a Video4Linux2 sensor driver for the OmniVision
> @@ -804,6 +809,7 @@ config VIDEO_OV7670
> config VIDEO_OV7740
> tristate "OmniVision OV7740 sensor support"
> depends on I2C && VIDEO_V4L2
> + select REGMAP_I2C
> help
> This is a Video4Linux2 sensor driver for the OmniVision
> OV7740 VGA camera sensor.
> @@ -829,6 +835,7 @@ config VIDEO_OV9640
> config VIDEO_OV9650
> tristate "OmniVision OV9650/OV9652 sensor support"
> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + select REGMAP_I2C
Nor this one.
> select REGMAP_SCCB
> help
> This is a V4L2 sensor driver for the Omnivision
Could you send v2, please, removing those two?
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC] Buildfailure due to mising "select REGMAP_I2C"
2020-02-25 7:51 ` Sakari Ailus
@ 2020-02-25 7:56 ` Ian Kumlien
2020-02-25 10:08 ` Sakari Ailus
0 siblings, 1 reply; 6+ messages in thread
From: Ian Kumlien @ 2020-02-25 7:56 UTC (permalink / raw)
To: Sakari Ailus
Cc: hverkuil-cisco, petrcvekcz, Ricardo Ribalda Delgado, leonl, linux-media
On Tue, Feb 25, 2020 at 8:51 AM Sakari Ailus
<sakari.ailus@linux.intel.com> wrote:
>
> Hi Ian,
>
> Thank you for the patch.
>
> On Mon, Feb 24, 2020 at 11:35:54PM +0100, Ian Kumlien wrote:
> > Hi,
> >
> > I got surprised by:
> > ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe':
> > tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c'
> > make: *** [Makefile:1078: vmlinux] Error 1
> >
> > When going from 5.5.2 -> 5.5.6
> >
> > A quick git grep shows that something like this might be needed, but
> > it should be verified.
> > I'm really uncertain about the ones that say REGMAP_SCCB...
>
> Those don't need REGMAP_I2C for they use SCCB.
I would have to read up, =)
> Please also do not send attachments; your mail is likely consumed by some
> list servers that way.
Ok
[..8<..]
> > This is a Video4Linux2 sensor driver for the Sony
> > @@ -774,6 +778,7 @@ config VIDEO_OV7251
> > config VIDEO_OV772X
> > tristate "OmniVision OV772x sensor support"
> > depends on I2C && VIDEO_V4L2
> > + select REGMAP_I2C
>
> So this isn't needed.
Ok
> > select REGMAP_SCCB
> > help
> > This is a Video4Linux2 sensor driver for the OmniVision
> > @@ -804,6 +809,7 @@ config VIDEO_OV7670
> > config VIDEO_OV7740
> > tristate "OmniVision OV7740 sensor support"
> > depends on I2C && VIDEO_V4L2
> > + select REGMAP_I2C
> > help
> > This is a Video4Linux2 sensor driver for the OmniVision
> > OV7740 VGA camera sensor.
> > @@ -829,6 +835,7 @@ config VIDEO_OV9640
> > config VIDEO_OV9650
> > tristate "OmniVision OV9650/OV9652 sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > + select REGMAP_I2C
>
> Nor this one.
Ok
> > select REGMAP_SCCB
> > help
> > This is a V4L2 sensor driver for the Omnivision
>
> Could you send v2, please, removing those two?
Yep, like this one:
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index c68e002d26ea..1d1170de8c98 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -238,6 +238,7 @@ config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
select HDMI
select V4L2_FWNODE
help
@@ -379,6 +380,7 @@ config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
select V4L2_FWNODE
+ select REGMAP_I2C
help
Support for the Texas Instruments TVP5150 video decoder.
@@ -584,6 +586,7 @@ config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on V4L2_FWNODE
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the Sony
IMX214 camera.
@@ -612,6 +615,7 @@ config VIDEO_IMX274
config VIDEO_IMX290
tristate "Sony IMX290 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Sony
@@ -804,6 +808,7 @@ config VIDEO_OV7670
config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
depends on I2C && VIDEO_V4L2
+ select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the OmniVision
OV7740 VGA camera sensor.
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [RFC] Buildfailure due to mising "select REGMAP_I2C"
2020-02-25 7:56 ` Ian Kumlien
@ 2020-02-25 10:08 ` Sakari Ailus
2020-02-25 22:31 ` Ian Kumlien
0 siblings, 1 reply; 6+ messages in thread
From: Sakari Ailus @ 2020-02-25 10:08 UTC (permalink / raw)
To: Ian Kumlien
Cc: hverkuil-cisco, petrcvekcz, Ricardo Ribalda Delgado, leonl, linux-media
On Tue, Feb 25, 2020 at 08:56:34AM +0100, Ian Kumlien wrote:
> On Tue, Feb 25, 2020 at 8:51 AM Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> >
> > Hi Ian,
> >
> > Thank you for the patch.
> >
> > On Mon, Feb 24, 2020 at 11:35:54PM +0100, Ian Kumlien wrote:
> > > Hi,
> > >
> > > I got surprised by:
> > > ld: drivers/media/i2c/tvp5150.o: in function `tvp5150_probe':
> > > tvp5150.c:(.text+0x11ac): undefined reference to `__devm_regmap_init_i2c'
> > > make: *** [Makefile:1078: vmlinux] Error 1
> > >
> > > When going from 5.5.2 -> 5.5.6
> > >
> > > A quick git grep shows that something like this might be needed, but
> > > it should be verified.
> > > I'm really uncertain about the ones that say REGMAP_SCCB...
> >
> > Those don't need REGMAP_I2C for they use SCCB.
>
> I would have to read up, =)
>
> > Please also do not send attachments; your mail is likely consumed by some
> > list servers that way.
>
> Ok
>
> [..8<..]
> > > This is a Video4Linux2 sensor driver for the Sony
> > > @@ -774,6 +778,7 @@ config VIDEO_OV7251
> > > config VIDEO_OV772X
> > > tristate "OmniVision OV772x sensor support"
> > > depends on I2C && VIDEO_V4L2
> > > + select REGMAP_I2C
> >
> > So this isn't needed.
>
> Ok
>
> > > select REGMAP_SCCB
> > > help
> > > This is a Video4Linux2 sensor driver for the OmniVision
> > > @@ -804,6 +809,7 @@ config VIDEO_OV7670
> > > config VIDEO_OV7740
> > > tristate "OmniVision OV7740 sensor support"
> > > depends on I2C && VIDEO_V4L2
> > > + select REGMAP_I2C
> > > help
> > > This is a Video4Linux2 sensor driver for the OmniVision
> > > OV7740 VGA camera sensor.
> > > @@ -829,6 +835,7 @@ config VIDEO_OV9640
> > > config VIDEO_OV9650
> > > tristate "OmniVision OV9650/OV9652 sensor support"
> > > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > > + select REGMAP_I2C
> >
> > Nor this one.
>
> Ok
>
> > > select REGMAP_SCCB
> > > help
> > > This is a V4L2 sensor driver for the Omnivision
> >
> > Could you send v2, please, removing those two?
>
> Yep, like this one:
Yes, like that one.
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index c68e002d26ea..1d1170de8c98 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -238,6 +238,7 @@ config VIDEO_ADV7604
> tristate "Analog Devices ADV7604 decoder"
> depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
> depends on GPIOLIB || COMPILE_TEST
> + select REGMAP_I2C
> select HDMI
> select V4L2_FWNODE
> help
> @@ -379,6 +380,7 @@ config VIDEO_TVP5150
> tristate "Texas Instruments TVP5150 video decoder"
> depends on VIDEO_V4L2 && I2C
> select V4L2_FWNODE
> + select REGMAP_I2C
> help
> Support for the Texas Instruments TVP5150 video decoder.
>
> @@ -584,6 +586,7 @@ config VIDEO_IMX214
> tristate "Sony IMX214 sensor support"
> depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> depends on V4L2_FWNODE
> + select REGMAP_I2C
> help
> This is a Video4Linux2 sensor driver for the Sony
> IMX214 camera.
> @@ -612,6 +615,7 @@ config VIDEO_IMX274
> config VIDEO_IMX290
> tristate "Sony IMX290 sensor support"
> depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> + select REGMAP_I2C
> select V4L2_FWNODE
> help
> This is a Video4Linux2 sensor driver for the Sony
> @@ -804,6 +808,7 @@ config VIDEO_OV7670
> config VIDEO_OV7740
> tristate "OmniVision OV7740 sensor support"
> depends on I2C && VIDEO_V4L2
> + select REGMAP_I2C
> help
> This is a Video4Linux2 sensor driver for the OmniVision
> OV7740 VGA camera sensor.
--
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC] Buildfailure due to mising "select REGMAP_I2C"
2020-02-25 10:08 ` Sakari Ailus
@ 2020-02-25 22:31 ` Ian Kumlien
2020-02-26 9:01 ` Sakari Ailus
0 siblings, 1 reply; 6+ messages in thread
From: Ian Kumlien @ 2020-02-25 22:31 UTC (permalink / raw)
To: Sakari Ailus
Cc: hverkuil-cisco, petrcvekcz, Ricardo Ribalda Delgado, leonl, linux-media
On Tue, Feb 25, 2020 at 11:08 AM Sakari Ailus
<sakari.ailus@linux.intel.com> wrote:
>
> On Tue, Feb 25, 2020 at 08:56:34AM +0100, Ian Kumlien wrote:
> > On Tue, Feb 25, 2020 at 8:51 AM Sakari Ailus
[... 8< ..]
> > Yep, like this one:
>
> Yes, like that one.
Anything more you need from me? or is this it? ;)
> > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > index c68e002d26ea..1d1170de8c98 100644
> > --- a/drivers/media/i2c/Kconfig
> > +++ b/drivers/media/i2c/Kconfig
> > @@ -238,6 +238,7 @@ config VIDEO_ADV7604
> > tristate "Analog Devices ADV7604 decoder"
> > depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
> > depends on GPIOLIB || COMPILE_TEST
> > + select REGMAP_I2C
> > select HDMI
> > select V4L2_FWNODE
> > help
> > @@ -379,6 +380,7 @@ config VIDEO_TVP5150
> > tristate "Texas Instruments TVP5150 video decoder"
> > depends on VIDEO_V4L2 && I2C
> > select V4L2_FWNODE
> > + select REGMAP_I2C
> > help
> > Support for the Texas Instruments TVP5150 video decoder.
> >
> > @@ -584,6 +586,7 @@ config VIDEO_IMX214
> > tristate "Sony IMX214 sensor support"
> > depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > depends on V4L2_FWNODE
> > + select REGMAP_I2C
> > help
> > This is a Video4Linux2 sensor driver for the Sony
> > IMX214 camera.
> > @@ -612,6 +615,7 @@ config VIDEO_IMX274
> > config VIDEO_IMX290
> > tristate "Sony IMX290 sensor support"
> > depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> > + select REGMAP_I2C
> > select V4L2_FWNODE
> > help
> > This is a Video4Linux2 sensor driver for the Sony
> > @@ -804,6 +808,7 @@ config VIDEO_OV7670
> > config VIDEO_OV7740
> > tristate "OmniVision OV7740 sensor support"
> > depends on I2C && VIDEO_V4L2
> > + select REGMAP_I2C
> > help
> > This is a Video4Linux2 sensor driver for the OmniVision
> > OV7740 VGA camera sensor.
>
> --
> Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [RFC] Buildfailure due to mising "select REGMAP_I2C"
2020-02-25 22:31 ` Ian Kumlien
@ 2020-02-26 9:01 ` Sakari Ailus
0 siblings, 0 replies; 6+ messages in thread
From: Sakari Ailus @ 2020-02-26 9:01 UTC (permalink / raw)
To: Ian Kumlien
Cc: hverkuil-cisco, petrcvekcz, Ricardo Ribalda Delgado, leonl, linux-media
Ian,
On Tue, Feb 25, 2020 at 11:31:01PM +0100, Ian Kumlien wrote:
> On Tue, Feb 25, 2020 at 11:08 AM Sakari Ailus
> <sakari.ailus@linux.intel.com> wrote:
> >
> > On Tue, Feb 25, 2020 at 08:56:34AM +0100, Ian Kumlien wrote:
> > > On Tue, Feb 25, 2020 at 8:51 AM Sakari Ailus
>
> [... 8< ..]
>
> > > Yep, like this one:
> >
> > Yes, like that one.
>
> Anything more you need from me? or is this it? ;)
Ah, I now notice you've perhaps sent the mail using a mail client that has
converted tabs to spaces, for instance. That makes the patch rather
difficult to apply. Some e-mail clients do that right, some do not. Often
copying and pasting the text from a terminal also does the unwanted
conversion.
Patches are best sent using git send-email; it's made for that purpose. If
you were already using git, you're quite close.
So in this case, I'd like to ask you to take the diff you sent in the
earlier e-mail, and send the resulting patch using git send-email so it can
be merged.
And, now that this is not really an RFC anymore, the subject prefix should
be "PATCH" instead of "RFC".
There's more documentation in Documentation/process/submitting-patches.rst
.
--
Kind regards,
Sakari Ailus
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-02-26 9:01 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-24 22:35 [RFC] Buildfailure due to mising "select REGMAP_I2C" Ian Kumlien
2020-02-25 7:51 ` Sakari Ailus
2020-02-25 7:56 ` Ian Kumlien
2020-02-25 10:08 ` Sakari Ailus
2020-02-25 22:31 ` Ian Kumlien
2020-02-26 9:01 ` Sakari Ailus
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.