* [tty:tty-testing 76/89] drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
@ 2020-03-06 13:57 ` kbuild test robot
0 siblings, 0 replies; 4+ messages in thread
From: kbuild test robot @ 2020-03-06 13:57 UTC (permalink / raw)
To: Vincent Chen; +Cc: kbuild-all, linux-serial, Greg Kroah-Hartman
[-- Attachment #1: Type: text/plain, Size: 2469 bytes --]
tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
head: 8434c477300896e50907650a7476116249030b16
commit: cc2d0148b11763808c835ec5a413620ad92fc340 [76/89] tty: serial: Add CONSOLE_POLL support to SiFive UART
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.5.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout cc2d0148b11763808c835ec5a413620ad92fc340
# save the attached .config to linux build tree
GCC_VERSION=7.5.0 make.cross ARCH=sh
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
.poll_get_char = sifive_serial_poll_get_char,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sifive_serial_clk_notifier
>> drivers/tty/serial/sifive.c:905:19: error: 'sifive_serial_poll_put_char' undeclared here (not in a function); did you mean 'sifive_serial_poll_get_char'?
.poll_put_char = sifive_serial_poll_put_char,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sifive_serial_poll_get_char
vim +904 drivers/tty/serial/sifive.c
886
887 static const struct uart_ops sifive_serial_uops = {
888 .tx_empty = sifive_serial_tx_empty,
889 .set_mctrl = sifive_serial_set_mctrl,
890 .get_mctrl = sifive_serial_get_mctrl,
891 .stop_tx = sifive_serial_stop_tx,
892 .start_tx = sifive_serial_start_tx,
893 .stop_rx = sifive_serial_stop_rx,
894 .break_ctl = sifive_serial_break_ctl,
895 .startup = sifive_serial_startup,
896 .shutdown = sifive_serial_shutdown,
897 .set_termios = sifive_serial_set_termios,
898 .type = sifive_serial_type,
899 .release_port = sifive_serial_release_port,
900 .request_port = sifive_serial_request_port,
901 .config_port = sifive_serial_config_port,
902 .verify_port = sifive_serial_verify_port,
903 #ifdef CONFIG_CONSOLE_POLL
> 904 .poll_get_char = sifive_serial_poll_get_char,
> 905 .poll_put_char = sifive_serial_poll_put_char,
906 #endif
907 };
908
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 53767 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* [tty:tty-testing 76/89] drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
@ 2020-03-06 13:57 ` kbuild test robot
0 siblings, 0 replies; 4+ messages in thread
From: kbuild test robot @ 2020-03-06 13:57 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2526 bytes --]
tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
head: 8434c477300896e50907650a7476116249030b16
commit: cc2d0148b11763808c835ec5a413620ad92fc340 [76/89] tty: serial: Add CONSOLE_POLL support to SiFive UART
config: sh-allmodconfig (attached as .config)
compiler: sh4-linux-gcc (GCC) 7.5.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout cc2d0148b11763808c835ec5a413620ad92fc340
# save the attached .config to linux build tree
GCC_VERSION=7.5.0 make.cross ARCH=sh
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
.poll_get_char = sifive_serial_poll_get_char,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sifive_serial_clk_notifier
>> drivers/tty/serial/sifive.c:905:19: error: 'sifive_serial_poll_put_char' undeclared here (not in a function); did you mean 'sifive_serial_poll_get_char'?
.poll_put_char = sifive_serial_poll_put_char,
^~~~~~~~~~~~~~~~~~~~~~~~~~~
sifive_serial_poll_get_char
vim +904 drivers/tty/serial/sifive.c
886
887 static const struct uart_ops sifive_serial_uops = {
888 .tx_empty = sifive_serial_tx_empty,
889 .set_mctrl = sifive_serial_set_mctrl,
890 .get_mctrl = sifive_serial_get_mctrl,
891 .stop_tx = sifive_serial_stop_tx,
892 .start_tx = sifive_serial_start_tx,
893 .stop_rx = sifive_serial_stop_rx,
894 .break_ctl = sifive_serial_break_ctl,
895 .startup = sifive_serial_startup,
896 .shutdown = sifive_serial_shutdown,
897 .set_termios = sifive_serial_set_termios,
898 .type = sifive_serial_type,
899 .release_port = sifive_serial_release_port,
900 .request_port = sifive_serial_request_port,
901 .config_port = sifive_serial_config_port,
902 .verify_port = sifive_serial_verify_port,
903 #ifdef CONFIG_CONSOLE_POLL
> 904 .poll_get_char = sifive_serial_poll_get_char,
> 905 .poll_put_char = sifive_serial_poll_put_char,
906 #endif
907 };
908
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 53767 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [tty:tty-testing 76/89] drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
2020-03-06 13:57 ` kbuild test robot
@ 2020-03-07 8:52 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 4+ messages in thread
From: Greg Kroah-Hartman @ 2020-03-07 8:52 UTC (permalink / raw)
To: kbuild test robot; +Cc: Vincent Chen, kbuild-all, linux-serial
On Fri, Mar 06, 2020 at 09:57:25PM +0800, kbuild test robot wrote:
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
> head: 8434c477300896e50907650a7476116249030b16
> commit: cc2d0148b11763808c835ec5a413620ad92fc340 [76/89] tty: serial: Add CONSOLE_POLL support to SiFive UART
> config: sh-allmodconfig (attached as .config)
> compiler: sh4-linux-gcc (GCC) 7.5.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> git checkout cc2d0148b11763808c835ec5a413620ad92fc340
> # save the attached .config to linux build tree
> GCC_VERSION=7.5.0 make.cross ARCH=sh
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> >> drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
> .poll_get_char = sifive_serial_poll_get_char,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> sifive_serial_clk_notifier
> >> drivers/tty/serial/sifive.c:905:19: error: 'sifive_serial_poll_put_char' undeclared here (not in a function); did you mean 'sifive_serial_poll_get_char'?
> .poll_put_char = sifive_serial_poll_put_char,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> sifive_serial_poll_get_char
>
> vim +904 drivers/tty/serial/sifive.c
>
> 886
> 887 static const struct uart_ops sifive_serial_uops = {
> 888 .tx_empty = sifive_serial_tx_empty,
> 889 .set_mctrl = sifive_serial_set_mctrl,
> 890 .get_mctrl = sifive_serial_get_mctrl,
> 891 .stop_tx = sifive_serial_stop_tx,
> 892 .start_tx = sifive_serial_start_tx,
> 893 .stop_rx = sifive_serial_stop_rx,
> 894 .break_ctl = sifive_serial_break_ctl,
> 895 .startup = sifive_serial_startup,
> 896 .shutdown = sifive_serial_shutdown,
> 897 .set_termios = sifive_serial_set_termios,
> 898 .type = sifive_serial_type,
> 899 .release_port = sifive_serial_release_port,
> 900 .request_port = sifive_serial_request_port,
> 901 .config_port = sifive_serial_config_port,
> 902 .verify_port = sifive_serial_verify_port,
> 903 #ifdef CONFIG_CONSOLE_POLL
> > 904 .poll_get_char = sifive_serial_poll_get_char,
> > 905 .poll_put_char = sifive_serial_poll_put_char,
> 906 #endif
> 907 };
> 908
I'm dropping this patch from my tree now.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [tty:tty-testing 76/89] drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
@ 2020-03-07 8:52 ` Greg Kroah-Hartman
0 siblings, 0 replies; 4+ messages in thread
From: Greg Kroah-Hartman @ 2020-03-07 8:52 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 2642 bytes --]
On Fri, Mar 06, 2020 at 09:57:25PM +0800, kbuild test robot wrote:
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tty-testing
> head: 8434c477300896e50907650a7476116249030b16
> commit: cc2d0148b11763808c835ec5a413620ad92fc340 [76/89] tty: serial: Add CONSOLE_POLL support to SiFive UART
> config: sh-allmodconfig (attached as .config)
> compiler: sh4-linux-gcc (GCC) 7.5.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> git checkout cc2d0148b11763808c835ec5a413620ad92fc340
> # save the attached .config to linux build tree
> GCC_VERSION=7.5.0 make.cross ARCH=sh
>
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
>
> >> drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'?
> .poll_get_char = sifive_serial_poll_get_char,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> sifive_serial_clk_notifier
> >> drivers/tty/serial/sifive.c:905:19: error: 'sifive_serial_poll_put_char' undeclared here (not in a function); did you mean 'sifive_serial_poll_get_char'?
> .poll_put_char = sifive_serial_poll_put_char,
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> sifive_serial_poll_get_char
>
> vim +904 drivers/tty/serial/sifive.c
>
> 886
> 887 static const struct uart_ops sifive_serial_uops = {
> 888 .tx_empty = sifive_serial_tx_empty,
> 889 .set_mctrl = sifive_serial_set_mctrl,
> 890 .get_mctrl = sifive_serial_get_mctrl,
> 891 .stop_tx = sifive_serial_stop_tx,
> 892 .start_tx = sifive_serial_start_tx,
> 893 .stop_rx = sifive_serial_stop_rx,
> 894 .break_ctl = sifive_serial_break_ctl,
> 895 .startup = sifive_serial_startup,
> 896 .shutdown = sifive_serial_shutdown,
> 897 .set_termios = sifive_serial_set_termios,
> 898 .type = sifive_serial_type,
> 899 .release_port = sifive_serial_release_port,
> 900 .request_port = sifive_serial_request_port,
> 901 .config_port = sifive_serial_config_port,
> 902 .verify_port = sifive_serial_verify_port,
> 903 #ifdef CONFIG_CONSOLE_POLL
> > 904 .poll_get_char = sifive_serial_poll_get_char,
> > 905 .poll_put_char = sifive_serial_poll_put_char,
> 906 #endif
> 907 };
> 908
I'm dropping this patch from my tree now.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-07 8:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-06 13:57 [tty:tty-testing 76/89] drivers/tty/serial/sifive.c:904:19: error: 'sifive_serial_poll_get_char' undeclared here (not in a function); did you mean 'sifive_serial_clk_notifier'? kbuild test robot
2020-03-06 13:57 ` kbuild test robot
2020-03-07 8:52 ` Greg Kroah-Hartman
2020-03-07 8:52 ` Greg Kroah-Hartman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.