From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, Liviu Dudau <liviu.dudau@arm.com>, Sudeep Holla <sudeep.holla@arm.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mark Rutland <mark.rutland@arm.com> Subject: [PATCH v3 13/20] arm64: dts: arm: Fix serial node names Date: Wed, 13 May 2020 11:30:09 +0100 [thread overview] Message-ID: <20200513103016.130417-14-andre.przywara@arm.com> (raw) In-Reply-To: <20200513103016.130417-1-andre.przywara@arm.com> The UARTs for all Arm Ltd. boards were using "uart" as their node name stub. Replace that with the required "serial" string, to comply with the PL011 DT binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 8 ++++---- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 8 ++++---- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 8 ++++---- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d4d88ce996a5..f4a65d693f15 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -316,7 +316,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -324,7 +324,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -332,7 +332,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -340,7 +340,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 63efb88595d4..e226c5e080c2 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -189,7 +189,7 @@ reg = <0x010000 0x1000>; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -197,7 +197,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -205,7 +205,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -213,7 +213,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 2b34661d426c..ee860d539395 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -729,7 +729,7 @@ }; }; - soc_uart0: uart@7ff80000 { + soc_uart0: serial@7ff80000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x7ff80000 0x0 0x1000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index f61e313ab1a4..b81651b1890a 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -158,7 +158,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -166,7 +166,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -174,7 +174,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -182,7 +182,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, Liviu Dudau <liviu.dudau@arm.com>, Sudeep Holla <sudeep.holla@arm.com>, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 13/20] arm64: dts: arm: Fix serial node names Date: Wed, 13 May 2020 11:30:09 +0100 [thread overview] Message-ID: <20200513103016.130417-14-andre.przywara@arm.com> (raw) In-Reply-To: <20200513103016.130417-1-andre.przywara@arm.com> The UARTs for all Arm Ltd. boards were using "uart" as their node name stub. Replace that with the required "serial" string, to comply with the PL011 DT binding. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 8 ++++---- arch/arm64/boot/dts/arm/foundation-v8.dtsi | 8 ++++---- arch/arm64/boot/dts/arm/juno-base.dtsi | 2 +- arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi | 8 ++++---- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d4d88ce996a5..f4a65d693f15 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -316,7 +316,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -324,7 +324,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -332,7 +332,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -340,7 +340,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi index 63efb88595d4..e226c5e080c2 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi +++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi @@ -189,7 +189,7 @@ reg = <0x010000 0x1000>; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -197,7 +197,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -205,7 +205,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -213,7 +213,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 2b34661d426c..ee860d539395 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -729,7 +729,7 @@ }; }; - soc_uart0: uart@7ff80000 { + soc_uart0: serial@7ff80000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x7ff80000 0x0 0x1000>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index f61e313ab1a4..b81651b1890a 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -158,7 +158,7 @@ clock-names = "KMIREFCLK", "apb_pclk"; }; - v2m_serial0: uart@90000 { + v2m_serial0: serial@90000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x090000 0x1000>; interrupts = <5>; @@ -166,7 +166,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial1: uart@a0000 { + v2m_serial1: serial@a0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0a0000 0x1000>; interrupts = <6>; @@ -174,7 +174,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial2: uart@b0000 { + v2m_serial2: serial@b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0b0000 0x1000>; interrupts = <7>; @@ -182,7 +182,7 @@ clock-names = "uartclk", "apb_pclk"; }; - v2m_serial3: uart@c0000 { + v2m_serial3: serial@c0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0c0000 0x1000>; interrupts = <8>; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-13 10:30 UTC|newest] Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-13 10:29 [PATCH v3 00/20] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards" Andre Przywara 2020-05-13 10:29 ` Andre Przywara 2020-05-13 10:29 ` [PATCH v3 01/20] dt-bindings: arm: gic: Allow combining arm,gic-400 compatible strings Andre Przywara 2020-05-13 10:29 ` [PATCH v3 01/20] dt-bindings: arm: gic: Allow combining arm, gic-400 " Andre Przywara 2020-05-15 3:16 ` Rob Herring 2020-05-15 3:16 ` Rob Herring 2020-05-19 7:39 ` [PATCH v3 01/20] dt-bindings: arm: gic: Allow combining arm,gic-400 " Geert Uytterhoeven 2020-05-19 7:39 ` Geert Uytterhoeven 2020-05-19 9:19 ` André Przywara 2020-05-19 9:19 ` André Przywara 2020-05-26 15:49 ` Rob Herring 2020-05-26 15:49 ` Rob Herring 2020-05-13 10:29 ` [PATCH v3 02/20] arm64: dts: arm: Fix node address fields Andre Przywara 2020-05-13 10:29 ` Andre Przywara 2020-05-13 17:01 ` Sudeep Holla 2020-05-13 17:01 ` Sudeep Holla 2020-05-13 10:29 ` [PATCH v3 03/20] arm64: dts: arm: fvp: Move fixed devices out of bus node Andre Przywara 2020-05-13 10:29 ` Andre Przywara 2020-05-13 17:22 ` Sudeep Holla 2020-05-13 17:22 ` Sudeep Holla 2020-05-13 10:30 ` [PATCH v3 04/20] arm64: dts: arm: vexpress: " Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 17:26 ` Sudeep Holla 2020-05-13 17:26 ` Sudeep Holla 2020-05-28 2:48 ` Guenter Roeck 2020-05-28 2:48 ` Guenter Roeck 2020-05-28 2:55 ` Guenter Roeck 2020-05-28 2:55 ` Guenter Roeck 2020-06-27 3:57 ` Guenter Roeck 2020-06-27 3:57 ` Guenter Roeck 2020-06-29 8:55 ` Sudeep Holla 2020-06-29 8:55 ` Sudeep Holla 2020-05-28 13:30 ` André Przywara 2020-05-28 13:30 ` André Przywara 2020-06-01 10:14 ` André Przywara 2020-06-01 10:14 ` André Przywara 2020-06-01 23:12 ` Rob Herring 2020-06-01 23:12 ` Rob Herring 2020-06-03 11:20 ` André Przywara 2020-06-03 11:20 ` André Przywara 2020-06-03 13:49 ` Rob Herring 2020-06-03 13:49 ` Rob Herring 2020-05-13 10:30 ` [PATCH v3 05/20] arm64: dts: arm: foundation: Move fixed clocks " Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 06/20] arm64: dts: arm: juno: Move fixed devices " Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 07/20] arm64: dts: juno: Fix mem-timer Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 08/20] arm64: dts: arm: model: Fix GIC compatible names Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 18:21 ` Sudeep Holla 2020-05-13 18:21 ` Sudeep Holla 2020-05-15 15:10 ` André Przywara 2020-05-15 15:10 ` André Przywara 2020-05-13 10:30 ` [PATCH v3 09/20] arm64: dts: arm: juno: Fix GIC child nodes Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 10/20] arm64: dts: arm: foundation: " Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 11/20] arm64: dts: arm: Fix ITS node names and #msi-cells Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 12/20] arm64: dts: juno: usb: Use proper DT node name Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` Andre Przywara [this message] 2020-05-13 10:30 ` [PATCH v3 13/20] arm64: dts: arm: Fix serial node names Andre Przywara 2020-05-13 10:30 ` [PATCH v3 14/20] arm64: dts: fvp: Fix SMMU DT node Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 15/20] arm64: dts: arm: Fix bus node names Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 16/20] arm64: dts: juno: Fix GPU interrupt order Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 18:24 ` Sudeep Holla 2020-05-13 18:24 ` Sudeep Holla 2020-05-15 15:13 ` André Przywara 2020-05-15 15:13 ` André Przywara 2020-05-13 10:30 ` [PATCH v3 17/20] arm64: dts: arm: Fix VExpress LED names Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 18/20] arm64: dts: juno: Fix SCPI shared mem node name Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` [PATCH v3 19/20] dt-bindings: mali-midgard: Allow dma-coherent Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-15 3:16 ` Rob Herring 2020-05-15 3:16 ` Rob Herring 2020-05-15 3:16 ` Rob Herring 2020-05-13 10:30 ` [PATCH v3 20/20] dt-bindings: ehci/ohci: Allow iommus property Andre Przywara 2020-05-13 10:30 ` Andre Przywara 2020-05-13 18:28 ` Sudeep Holla 2020-05-13 18:28 ` Sudeep Holla 2020-05-15 3:17 ` Rob Herring 2020-05-15 3:17 ` Rob Herring 2020-05-18 8:15 ` [PATCH v3 00/20] dts/dt-bindings: Fix Arm Ltd. ARMv8 "boards" Sudeep Holla 2020-05-18 8:15 ` Sudeep Holla 2020-05-18 11:31 ` Sudeep Holla 2020-05-18 11:31 ` Sudeep Holla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200513103016.130417-14-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=liviu.dudau@arm.com \ --cc=lorenzo.pieralisi@arm.com \ --cc=mark.rutland@arm.com \ --cc=robh@kernel.org \ --cc=sudeep.holla@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.