All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 05/32] drm/i915/rkl: Add Wa_14011224835 for PHY B initialization
Date: Wed, 17 Jun 2020 17:42:13 -0700	[thread overview]
Message-ID: <20200618004240.16263-6-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20200618004240.16263-1-lucas.demarchi@intel.com>

From: Matt Roper <matthew.d.roper@intel.com>

After doing normal PHY-B initialization on Rocket Lake, we need to
manually copy some additional PHY-A register values into PHY-B
registers.

Note that the bspec's combo phy page doesn't specify that this
workaround is restricted to specific platform steppings (and doesn't
even do a very good job of specifying that RKL is the only platform this
is needed on), but the RKL workaround page lists this as relevant only
for A and B steppings, so I'm trusting that information for now.

v2:  Make rkl_combo_phy_b_init_wa() static

Bspec: 49291
Bspec: 53273
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
 .../gpu/drm/i915/display/intel_combo_phy.c    | 26 +++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h               | 13 +++++++++-
 2 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c b/drivers/gpu/drm/i915/display/intel_combo_phy.c
index 77b04bb3ec624..d5d95e2746c2c 100644
--- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
@@ -338,6 +338,27 @@ void intel_combo_phy_power_up_lanes(struct drm_i915_private *dev_priv,
 	intel_de_write(dev_priv, ICL_PORT_CL_DW10(phy), val);
 }
 
+static void rkl_combo_phy_b_init_wa(struct drm_i915_private *i915)
+{
+	u32 grccode, grccode_ldo;
+	u32 iref_rcal_ord, rcompcode_ld_cap_ov;
+
+	intel_de_wait_for_register(i915, ICL_PORT_COMP_DW3(PHY_A),
+				   FIRST_COMP_DONE, FIRST_COMP_DONE, 100);
+
+	grccode = REG_FIELD_GET(GRCCODE,
+				intel_de_read(i915, ICL_PORT_COMP_DW6(PHY_A)));
+	iref_rcal_ord = REG_FIELD_PREP(IREF_RCAL_ORD, grccode);
+	intel_de_rmw(i915, ICL_PORT_COMP_DW2(PHY_B), IREF_RCAL_ORD,
+		     iref_rcal_ord | IREF_RCAL_ORD_EN);
+
+	grccode_ldo = REG_FIELD_GET(GRCCODE_LDO,
+				    intel_de_read(i915, ICL_PORT_COMP_DW0(PHY_A)));
+	rcompcode_ld_cap_ov = REG_FIELD_PREP(RCOMPCODE_LD_CAP_OV, grccode_ldo);
+	intel_de_rmw(i915, ICL_PORT_COMP_DW6(PHY_B), RCOMPCODE_LD_CAP_OV,
+		     rcompcode_ld_cap_ov | RCOMPCODEOVEN_LDO_SYNC);
+}
+
 static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
 {
 	enum phy phy;
@@ -390,6 +411,11 @@ static void icl_combo_phys_init(struct drm_i915_private *dev_priv)
 		val = intel_de_read(dev_priv, ICL_PORT_CL_DW5(phy));
 		val |= CL_POWER_DOWN_ENABLE;
 		intel_de_write(dev_priv, ICL_PORT_CL_DW5(phy), val);
+
+		if (IS_RKL_REVID(dev_priv, RKL_REVID_A0, RKL_REVID_B0) &&
+		    phy == PHY_B)
+			/* Wa_14011224835:rkl[a0..c0] */
+			rkl_combo_phy_b_init_wa(dev_priv);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 34b2ec04ccd86..10f6e46523b6e 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1908,11 +1908,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 
 #define CNL_PORT_COMP_DW0		_MMIO(0x162100)
 #define ICL_PORT_COMP_DW0(phy)		_MMIO(_ICL_PORT_COMP_DW(0, phy))
-#define   COMP_INIT			(1 << 31)
+#define   COMP_INIT			REG_BIT(31)
+#define   GRCCODE_LDO			REG_GENMASK(7, 0)
 
 #define CNL_PORT_COMP_DW1		_MMIO(0x162104)
 #define ICL_PORT_COMP_DW1(phy)		_MMIO(_ICL_PORT_COMP_DW(1, phy))
 
+#define ICL_PORT_COMP_DW2(phy)		_MMIO(_ICL_PORT_COMP_DW(2, phy))
+#define   IREF_RCAL_ORD_EN		REG_BIT(7)
+#define   IREF_RCAL_ORD			REG_GENMASK(6, 0)
+
 #define CNL_PORT_COMP_DW3		_MMIO(0x16210c)
 #define ICL_PORT_COMP_DW3(phy)		_MMIO(_ICL_PORT_COMP_DW(3, phy))
 #define   PROCESS_INFO_DOT_0		(0 << 26)
@@ -1925,6 +1930,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define   VOLTAGE_INFO_1_05V		(2 << 24)
 #define   VOLTAGE_INFO_MASK		(3 << 24)
 #define   VOLTAGE_INFO_SHIFT		24
+#define   FIRST_COMP_DONE		REG_BIT(22)
+
+#define ICL_PORT_COMP_DW6(phy)		_MMIO(_ICL_PORT_COMP_DW(6, phy))
+#define   GRCCODE			REG_GENMASK(30, 24)
+#define   RCOMPCODEOVEN_LDO_SYNC	REG_BIT(23)
+#define   RCOMPCODE_LD_CAP_OV		REG_GENMASK(22, 16)
 
 #define ICL_PORT_COMP_DW8(phy)		_MMIO(_ICL_PORT_COMP_DW(8, phy))
 #define   IREFGEN			(1 << 24)
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-06-18  0:43 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-18  0:42 [Intel-gfx] [PATCH v2 00/32] Introduce DG1 Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 01/32] drm/i915/rkl: Handle new DPCLKA_CFGCR0 layout Lucas De Marchi
2020-06-23 23:40   ` Souza, Jose
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 02/32] drm/i915/rkl: Add DPLL4 support Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 03/32] drm/i915/rkl: Handle HTI Lucas De Marchi
2020-06-23 23:56   ` Souza, Jose
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 04/32] drm/i915/rkl: Add initial workarounds Lucas De Marchi
2020-06-24  0:13   ` Souza, Jose
2020-06-18  0:42 ` Lucas De Marchi [this message]
2020-06-24  0:07   ` [Intel-gfx] [PATCH v2 05/32] drm/i915/rkl: Add Wa_14011224835 for PHY B initialization Souza, Jose
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 06/32] drm/i915: Add has_master_unit_irq flag Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 07/32] drm/i915/dg1: add initial DG-1 definitions Lucas De Marchi
2020-06-22  7:51   ` Daniel Vetter
2020-06-22  9:55     ` Jani Nikula
2020-06-23  4:54       ` Dave Airlie
2020-06-23  6:17         ` Daniel Vetter
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 08/32] drm/i915/dg1: Add DG1 PCI IDs Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 09/32] drm/i915/dg1: add support for the master unit interrupt Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 10/32] drm/i915/dg1: Remove SHPD_FILTER_CNT register programming Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 11/32] drm/i915/dg1: Add fake PCH Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 12/32] drm/i915/dg1: Initialize RAWCLK properly Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 13/32] drm/i915/dg1: Define MOCS table for DG1 Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 14/32] drm/i915/dg1: Add DG1 power wells Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 15/32] drm/i915/dg1: Increase mmio size to 4MB Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 16/32] drm/i915/dg1: Wait for pcode/uncore handshake at startup Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 17/32] drm/i915/dg1: Add DPLL macros for DG1 Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 18/32] drm/i915/dg1: Add and setup DPLLs " Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 19/32] drm/i915/dg1: Enable DPLL " Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 20/32] drm/i915/dg1: add hpd interrupt handling Lucas De Marchi
2020-06-22 18:35   ` Imre Deak
2020-06-22 20:43     ` Lucas De Marchi
2020-06-22 20:54       ` Imre Deak
2020-06-22 21:59         ` Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 21/32] drm/i915/dg1: invert HPD pins Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 22/32] drm/i915/dg1: gmbus pin mapping Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 23/32] drm/i915/dg1: Enable first 2 ports for DG1 Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 24/32] drm/i915/dg1: Don't program PHY_MISC for PHY-C and PHY-D Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 25/32] drm/i915/dg1: Update comp master/slave relationships for PHYs Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 26/32] drm/i915/dg1: Update voltage swing tables for DP Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 27/32] drm/i915/dg1: provide port/phy mapping for vbt Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 28/32] drm/i915/dg1: map/unmap pll clocks Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 29/32] drm/i915/dg1: enable PORT C/D aka D/E Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 30/32] drm/i915/dg1: Load DMC Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 31/32] drm/i915/dg1: Add initial DG1 workarounds Lucas De Marchi
2020-06-18  0:42 ` [Intel-gfx] [PATCH v2 32/32] drm/i915/dg1: DG1 does not support DC6 Lucas De Marchi
2020-06-18  0:56 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce DG1 (rev2) Patchwork
2020-06-18  0:57 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-06-18  1:18 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200618004240.16263-6-lucas.demarchi@intel.com \
    --to=lucas.demarchi@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.