From: Alistair Francis <alistair.francis@wdc.com>
To: peter.maydell@linaro.org, qemu-devel@nongnu.org
Cc: Damien Hedde <damien.hedde@greensocs.com>,
alistair23@gmail.com, Alistair Francis <alistair.francis@wdc.com>
Subject: [PULL v2 11/32] riscv/opentitan: Fix the ROM size
Date: Fri, 19 Jun 2020 09:57:56 -0700 [thread overview]
Message-ID: <20200619165817.4144200-12-alistair.francis@wdc.com> (raw)
In-Reply-To: <20200619165817.4144200-1-alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reported-by: Damien Hedde <damien.hedde@greensocs.com>
---
hw/riscv/opentitan.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/hw/riscv/opentitan.c b/hw/riscv/opentitan.c
index f6776da8e9..011e4f7ee2 100644
--- a/hw/riscv/opentitan.c
+++ b/hw/riscv/opentitan.c
@@ -25,12 +25,13 @@
#include "hw/misc/unimp.h"
#include "hw/riscv/boot.h"
#include "exec/address-spaces.h"
+#include "qemu/units.h"
static const struct MemmapEntry {
hwaddr base;
hwaddr size;
} ibex_memmap[] = {
- [IBEX_ROM] = { 0x00008000, 0xc000 },
+ [IBEX_ROM] = { 0x00008000, 16 * KiB },
[IBEX_RAM] = { 0x10000000, 0x10000 },
[IBEX_FLASH] = { 0x20000000, 0x80000 },
[IBEX_UART] = { 0x40000000, 0x10000 },
--
2.27.0
next prev parent reply other threads:[~2020-06-19 17:25 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-19 16:57 [PULL v2 00/32] riscv-to-apply queue Alistair Francis
2020-06-19 16:57 ` [PULL v2 01/32] riscv: Add helper to make NaN-boxing for FP register Alistair Francis
2020-06-19 16:57 ` [PULL v2 02/32] sifive_e: Support the revB machine Alistair Francis
2020-06-19 16:57 ` [PULL v2 03/32] riscv: Generalize CPU init routine for the base CPU Alistair Francis
2020-06-23 6:22 ` Bin Meng
2020-06-23 9:08 ` Markus Armbruster
2020-06-23 23:28 ` Alistair Francis
2020-06-19 16:57 ` [PULL v2 04/32] riscv: Generalize CPU init routine for the gcsu CPU Alistair Francis
2020-06-19 16:57 ` [PULL v2 05/32] riscv: Generalize CPU init routine for the imacu CPU Alistair Francis
2020-06-19 16:57 ` [PULL v2 06/32] riscv: Keep the CPU init routine names consistent Alistair Francis
2020-06-19 16:57 ` [PULL v2 07/32] target/riscv: Set access as data_load when validating stage-2 PTEs Alistair Francis
2020-06-19 16:57 ` [PULL v2 08/32] target/riscv: Report errors validating 2nd-stage PTEs Alistair Francis
2020-06-19 16:57 ` [PULL v2 09/32] target/riscv: Move the hfence instructions to the rvh decode Alistair Francis
2020-06-19 16:57 ` [PULL v2 10/32] target/riscv: Implement checks for hfence Alistair Francis
2020-06-19 16:57 ` Alistair Francis [this message]
2020-06-19 16:57 ` [PULL v2 12/32] hw/char: Initial commit of Ibex UART Alistair Francis
2020-06-19 16:57 ` [PULL v2 13/32] hw/intc: Initial commit of lowRISC Ibex PLIC Alistair Francis
2020-06-19 16:57 ` [PULL v2 14/32] riscv/opentitan: Connect the PLIC device Alistair Francis
2020-06-19 16:58 ` [PULL v2 15/32] riscv/opentitan: Connect the UART device Alistair Francis
2020-06-19 16:58 ` [PULL v2 16/32] target/riscv: Use a smaller guess size for no-MMU PMP Alistair Francis
2020-06-19 16:58 ` [PULL v2 17/32] hw/riscv: sifive_e: Remove the riscv_ prefix of the machine* and soc* functions Alistair Francis
2020-06-19 16:58 ` [PULL v2 18/32] hw/riscv: opentitan: " Alistair Francis
2020-06-19 16:58 ` [PULL v2 19/32] hw/riscv: sifive_u: Simplify the GEM IRQ connect code a little bit Alistair Francis
2020-06-19 16:58 ` [PULL v2 20/32] hw/riscv: sifive_u: Generate device tree node for OTP Alistair Francis
2020-06-19 16:58 ` [PULL v2 21/32] hw/riscv: sifive_gpio: Clean up the codes Alistair Francis
2020-06-19 16:58 ` [PULL v2 22/32] hw/riscv: sifive_gpio: Add a new 'ngpio' property Alistair Francis
2020-06-19 16:58 ` [PULL v2 23/32] hw/riscv: sifive_u: Hook a GPIO controller Alistair Francis
2020-06-19 16:58 ` [PULL v2 24/32] hw/riscv: sifive_gpio: Do not blindly trigger output IRQs Alistair Francis
2020-06-19 16:58 ` [PULL v2 25/32] hw/riscv: sifive_u: Add reset functionality Alistair Francis
2020-06-19 16:58 ` [PULL v2 26/32] hw/riscv: sifive_u: Rename serial property get/set functions to a generic name Alistair Francis
2020-06-19 16:58 ` [PULL v2 27/32] hw/riscv: sifive_u: Add a new property msel for MSEL pin state Alistair Francis
2020-06-19 16:58 ` [PULL v2 28/32] target/riscv: Rename IBEX CPU init routine Alistair Francis
2020-06-19 16:58 ` [PULL v2 29/32] hw/riscv: sifive: Change SiFive E/U CPU reset vector to 0x1004 Alistair Francis
2020-06-19 16:58 ` [PULL v2 30/32] hw/riscv: sifive_u: Support different boot source per MSEL pin state Alistair Francis
2020-06-19 16:58 ` [PULL v2 31/32] hw/riscv: sifive_u: Sort the SoC memmap table entries Alistair Francis
2020-06-19 16:58 ` [PULL v2 32/32] hw/riscv: sifive_u: Add a dummy DDR memory controller device Alistair Francis
2020-06-19 18:29 ` [PULL v2 00/32] riscv-to-apply queue no-reply
2020-06-22 15:01 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200619165817.4144200-12-alistair.francis@wdc.com \
--to=alistair.francis@wdc.com \
--cc=alistair23@gmail.com \
--cc=damien.hedde@greensocs.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.