Re: [PATCH/RFC v4 2/4] regulator: fixed: add regulator_ops members for suspend/resume

From: Sudeep Holla <sudeep.holla@arm.com>
To: Mark Brown <broonie@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
	"ulf.hansson@linaro.org" <ulf.hansson@linaro.org>,
	"lgirdwood@gmail.com" <lgirdwood@gmail.com>,
	"magnus.damm@gmail.com" <magnus.damm@gmail.com>,
	"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-renesas-soc@vger.kernel.org" 
	<linux-renesas-soc@vger.kernel.org>,
	Sudeep Holla <sudeep.holla@arm.com>
Subject: Re: [PATCH/RFC v4 2/4] regulator: fixed: add regulator_ops members for suspend/resume
Date: Mon, 29 Jun 2020 18:42:46 +0100	[thread overview]
Message-ID: <20200629174220.GA4188@bogus> (raw)
In-Reply-To: <20200629172651.GG5499@sirena.org.uk>

On Mon, Jun 29, 2020 at 06:26:51PM +0100, Mark Brown wrote:
> On Mon, Jun 29, 2020 at 05:42:07PM +0100, Sudeep Holla wrote:
> > On Mon, Jun 29, 2020 at 05:14:50PM +0100, Mark Brown wrote:
> > > On Mon, Jun 29, 2020 at 04:07:28PM +0100, Sudeep Holla wrote:
> > >
> > > > The specification states clearly:
> > > > "... all devices in the system must be in a state that is compatible
> > > > with entry into the system state. These preconditions are beyond the scope
> > > > of this specification and are therefore not described here."
> > > > "Prior to the call, the OS must disable all sources of wakeup other than
> > > > those it needs to support for its implementation of suspend to RAM."
>
> > > This gets a bit circular for a generic OS since the OS needs some way to
> > > figure out what it's supposed to do on a given platform - for example
> > > the OS may be happy to use wakeup sources that the firmware is just
> > > going to cut power on.
>
> > While I understand the sentiments here, PSCI is targeted to address CPU
> > power state management mainly and system states like suspend/reset and
> > poweroff which involves last CPU. This is one of the reason it is out of
> > the scope of the specification.
>
> Sure, but as soon as we start talking about the last CPU stuff we're
> inevitably talking about the system as a whole.
>
> > Here is my understanding. DT specifies all the wakeup sources. Linux
> > can configure those and user may choose to enable a subset of them is
> > wakeup. As stated in the spec and also based on what we already do in
> > the kernel, we disable all other wakeup sources.
>
> > The PSCI firmware can then either read those from the interrupt controller
> > or based on static platform understanding, must not disable those wakeup
> > sources.
>
> That bit about static platform understanding isn't super helpful for the
> OS, so long as the firmware might do that the OS is pretty much out of
> luck.
>

I don't disagree. That's one of the reason I wanted to gather requirement
few years back when PSCI system suspend was introduced. I couldn't
convince PSCI spec authors myself.

> > > > I see nothing has been fixed in the firmware too and we are still
> > > > discussing the same after 3 years 😄. Clearly we should start trusting
> > > > firmware and built capability to fix and replace it if there are bugs
> > > > just like kernel and stop hacking around in the kernel to deal with
> > > > just broken platform/psci firmware.
>
> > > This isn't just an issue of buggy firmware as far as I can see, it's
> > > also a lack of ability for the OS and firmware to communicate
> > > information about their intentions to each other.  As things stand you'd
> > > need to put static information in the DT.
>
> > It is easy for DT to get out of sync with firmware unless it is generated
> > by the same firmware. That's the reason why I am against such multiple
>
> The ability for things to get out of sync also concerns me as I said
> further back in the thread but I'm not sure we have much alternative,
> realistically we're going to need some facility to work around firmware
> that isn't ideal.
>

I understand and I agree. That's the main reason I want to understand this
better and provide a generic solution. The current pm_suspend_via_firmware
seem to have different intentions(at-least that's what I grasped quickly
reading through the document)

> > sources of information. I understand ACPI has more flexibility and I did
>
> ACPI has a much stronger idea of what the system looks like which helps
> it a lot here.
>

Yes, I wanted something similar initially but didn't get good response
both from community and PSCI spec authors.

> > Each device or platform having its specific property in DT is not scalable.
> > Not sure if it is a generic problem. If it is, I would like to understand
> > more details on such lack of ability for communtication between OS and
> > firmware.
>
> It seems like a generic issue from where I'm sitting.

I can't disagree with that. The description of the issue and the solution
in the thread is. We need make it more generic and provide generic solution,.
I already see 2-3 threads addressing this in isolation as specific issue.
Also we need to check with DT maintainers if there are fine with the idea
of binding to address this issue.

--
Regards,
Sudeep