* [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
@ 2020-07-06 8:44 ` Richard Zhu
0 siblings, 0 replies; 8+ messages in thread
From: Richard Zhu @ 2020-07-06 8:44 UTC (permalink / raw)
To: shawnguo; +Cc: linux-imx, linux-arm-kernel, linux-kernel, Richard Zhu
Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
not support L2 Power Down").
System suspend/resume would be broken by PCIe, if PCIe is enabled.
Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
other xxx.dtb files are used on sabresd and sabreauto boards.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
arch/arm/boot/dts/Makefile | 4 ++++
arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6dl-sabresd-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6q-sabreauto-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6q-sabresd-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ----
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 -
7 files changed, 52 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6q-sabresd-pcie.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..25fcd091f986 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -458,8 +458,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-rex-basic.dtb \
imx6dl-riotboard.dtb \
imx6dl-sabreauto.dtb \
+ imx6dl-sabreauto-pcie.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-sabresd-pcie.dtb \
imx6dl-savageboard.dtb \
imx6dl-ts4900.dtb \
imx6dl-ts7970.dtb \
@@ -545,8 +547,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
+ imx6q-sabreauto-pcie.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
+ imx6q-sabresd-pcie.dtb \
imx6q-savageboard.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts b/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
new file mode 100644
index 000000000000..88fc15b1a9de
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6dl-sabreauto.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts b/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
new file mode 100644
index 000000000000..c57558c815d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6dl-sabresd.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts b/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
new file mode 100644
index 000000000000..769a2cf4a6ac
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6q-sabreauto.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd-pcie.dts b/arch/arm/boot/dts/imx6q-sabresd-pcie.dts
new file mode 100644
index 000000000000..2ff88f6a1d52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6q-sabresd.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index cf628465cd0a..30737e3b698a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -805,10 +805,6 @@
status = "okay";
};
-&pcie {
- status = "okay";
-};
-
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 28b35ccb3757..78ead45c748d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -725,7 +725,6 @@
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pcie>;
- status = "okay";
};
&pwm1 {
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
@ 2020-07-06 8:44 ` Richard Zhu
0 siblings, 0 replies; 8+ messages in thread
From: Richard Zhu @ 2020-07-06 8:44 UTC (permalink / raw)
To: shawnguo; +Cc: Richard Zhu, linux-imx, linux-arm-kernel, linux-kernel
Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
not support L2 Power Down").
System suspend/resume would be broken by PCIe, if PCIe is enabled.
Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
other xxx.dtb files are used on sabresd and sabreauto boards.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
arch/arm/boot/dts/Makefile | 4 ++++
arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6dl-sabresd-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6q-sabreauto-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6q-sabresd-pcie.dts | 12 ++++++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ----
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 -
7 files changed, 52 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
create mode 100644 arch/arm/boot/dts/imx6q-sabresd-pcie.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..25fcd091f986 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -458,8 +458,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-rex-basic.dtb \
imx6dl-riotboard.dtb \
imx6dl-sabreauto.dtb \
+ imx6dl-sabreauto-pcie.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
+ imx6dl-sabresd-pcie.dtb \
imx6dl-savageboard.dtb \
imx6dl-ts4900.dtb \
imx6dl-ts7970.dtb \
@@ -545,8 +547,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
+ imx6q-sabreauto-pcie.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
+ imx6q-sabresd-pcie.dtb \
imx6q-savageboard.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts b/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
new file mode 100644
index 000000000000..88fc15b1a9de
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6dl-sabreauto.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts b/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
new file mode 100644
index 000000000000..c57558c815d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6dl-sabresd.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts b/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
new file mode 100644
index 000000000000..769a2cf4a6ac
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6q-sabreauto.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd-pcie.dts b/arch/arm/boot/dts/imx6q-sabresd-pcie.dts
new file mode 100644
index 000000000000..2ff88f6a1d52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd-pcie.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6q-sabresd.dts"
+
+&pcie {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index cf628465cd0a..30737e3b698a 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -805,10 +805,6 @@
status = "okay";
};
-&pcie {
- status = "okay";
-};
-
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spdif>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 28b35ccb3757..78ead45c748d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -725,7 +725,6 @@
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
vpcie-supply = <®_pcie>;
- status = "okay";
};
&pwm1 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
2020-07-06 8:44 ` Richard Zhu
@ 2020-07-08 17:48 ` Fabio Estevam
-1 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2020-07-08 17:48 UTC (permalink / raw)
To: Richard Zhu
Cc: Shawn Guo, NXP Linux Team,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel
Hi Richard,
On Mon, Jul 6, 2020 at 5:49 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
>
> Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> not support L2 Power Down").
> System suspend/resume would be broken by PCIe, if PCIe is enabled.
> Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> other xxx.dtb files are used on sabresd and sabreauto boards.
We have several imx6 dts files that currently enable pcie.
Can't we have a proper software workaround for this issue instead?
Thanks
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
@ 2020-07-08 17:48 ` Fabio Estevam
0 siblings, 0 replies; 8+ messages in thread
From: Fabio Estevam @ 2020-07-08 17:48 UTC (permalink / raw)
To: Richard Zhu
Cc: Shawn Guo, NXP Linux Team,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel
Hi Richard,
On Mon, Jul 6, 2020 at 5:49 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
>
> Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> not support L2 Power Down").
> System suspend/resume would be broken by PCIe, if PCIe is enabled.
> Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> other xxx.dtb files are used on sabresd and sabreauto boards.
We have several imx6 dts files that currently enable pcie.
Can't we have a proper software workaround for this issue instead?
Thanks
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [EXT] Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
2020-07-08 17:48 ` Fabio Estevam
@ 2020-07-09 2:39 ` Richard Zhu
-1 siblings, 0 replies; 8+ messages in thread
From: Richard Zhu @ 2020-07-09 2:39 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo, dl-linux-imx,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel
> -----Original Message-----
> From: Fabio Estevam <festevam@gmail.com>
> Sent: 2020年7月9日 1:49
> To: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>; dl-linux-imx <linux-imx@nxp.com>;
> moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
> <linux-arm-kernel@lists.infradead.org>; linux-kernel
> <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts
> file
>
> Hi Richard,
>
> On Mon, Jul 6, 2020 at 5:49 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
> >
> > Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> > not support L2 Power Down").
> > System suspend/resume would be broken by PCIe, if PCIe is enabled.
> > Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> > other xxx.dtb files are used on sabresd and sabreauto boards.
>
> We have several imx6 dts files that currently enable pcie.
>
> Can't we have a proper software workaround for this issue instead?
>
Hi Fabio:
Up to now, unfortunately, there is no solid confidential SW workaround for this issue.
Best Regards
Richard Zhu
> Thanks
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [EXT] Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
@ 2020-07-09 2:39 ` Richard Zhu
0 siblings, 0 replies; 8+ messages in thread
From: Richard Zhu @ 2020-07-09 2:39 UTC (permalink / raw)
To: Fabio Estevam
Cc: Shawn Guo, dl-linux-imx,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
linux-kernel
> -----Original Message-----
> From: Fabio Estevam <festevam@gmail.com>
> Sent: 2020年7月9日 1:49
> To: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>; dl-linux-imx <linux-imx@nxp.com>;
> moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
> <linux-arm-kernel@lists.infradead.org>; linux-kernel
> <linux-kernel@vger.kernel.org>
> Subject: Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts
> file
>
> Hi Richard,
>
> On Mon, Jul 6, 2020 at 5:49 AM Richard Zhu <hongxing.zhu@nxp.com> wrote:
> >
> > Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> > not support L2 Power Down").
> > System suspend/resume would be broken by PCIe, if PCIe is enabled.
> > Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> > other xxx.dtb files are used on sabresd and sabreauto boards.
>
> We have several imx6 dts files that currently enable pcie.
>
> Can't we have a proper software workaround for this issue instead?
>
Hi Fabio:
Up to now, unfortunately, there is no solid confidential SW workaround for this issue.
Best Regards
Richard Zhu
> Thanks
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
2020-07-06 8:44 ` Richard Zhu
@ 2020-07-13 6:48 ` Shawn Guo
-1 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2020-07-13 6:48 UTC (permalink / raw)
To: Richard Zhu; +Cc: linux-imx, linux-arm-kernel, linux-kernel
On Mon, Jul 06, 2020 at 04:44:41PM +0800, Richard Zhu wrote:
> Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> not support L2 Power Down").
> System suspend/resume would be broken by PCIe, if PCIe is enabled.
> Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> other xxx.dtb files are used on sabresd and sabreauto boards.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> arch/arm/boot/dts/Makefile | 4 ++++
> arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6dl-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ----
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 -
> 7 files changed, 52 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabresd-pcie.dts
No. There are hundreds of boards based on i.MX6Q/DL. We are not going
to maintain a -pcie.dts for every single one of them.
Shawn
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file
@ 2020-07-13 6:48 ` Shawn Guo
0 siblings, 0 replies; 8+ messages in thread
From: Shawn Guo @ 2020-07-13 6:48 UTC (permalink / raw)
To: Richard Zhu; +Cc: linux-imx, linux-arm-kernel, linux-kernel
On Mon, Jul 06, 2020 at 04:44:41PM +0800, Richard Zhu wrote:
> Since iMX6Q/DL PCIe has the PM limitation (ERR005723 "PCIe PCIe does
> not support L2 Power Down").
> System suspend/resume would be broken by PCIe, if PCIe is enabled.
> Only enable PCIe in the xxx-pcie.dts files to avoid the brokens when
> other xxx.dtb files are used on sabresd and sabreauto boards.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> ---
> arch/arm/boot/dts/Makefile | 4 ++++
> arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6dl-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabreauto-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6q-sabresd-pcie.dts | 12 ++++++++++++
> arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 4 ----
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 -
> 7 files changed, 52 insertions(+), 5 deletions(-)
> create mode 100644 arch/arm/boot/dts/imx6dl-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6dl-sabresd-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabreauto-pcie.dts
> create mode 100644 arch/arm/boot/dts/imx6q-sabresd-pcie.dts
No. There are hundreds of boards based on i.MX6Q/DL. We are not going
to maintain a -pcie.dts for every single one of them.
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-07-13 6:50 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-06 8:44 [PATCH] ARM: dts: imx6qdl: only enable pcie in the pcie dts file Richard Zhu
2020-07-06 8:44 ` Richard Zhu
2020-07-08 17:48 ` Fabio Estevam
2020-07-08 17:48 ` Fabio Estevam
2020-07-09 2:39 ` [EXT] " Richard Zhu
2020-07-09 2:39 ` Richard Zhu
2020-07-13 6:48 ` Shawn Guo
2020-07-13 6:48 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.