[PATCH AUTOSEL 5.7 01/19] gpio: arizona: handle pm_runtime_get_sync failure case

[PATCH AUTOSEL 5.7 01/19] gpio: arizona: handle pm_runtime_get_sync failure case

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit e6f390a834b56583e6fc0949822644ce92fbb107 ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count. Call pm_runtime_put if
pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605025207.65719-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-arizona.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 5640efe5e7504..7520a13b4c7ca 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -106,6 +106,7 @@ static int arizona_gpio_direction_out(struct gpio_chip *chip,
 		ret = pm_runtime_get_sync(chip->parent);
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put(chip->parent);
 			return ret;
 		}
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.7 02/19] gpio: arizona: put pm_runtime in case of failure

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-arizona.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index 7520a13b4c7ca..5bda38e0780f2 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -64,6 +64,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		ret = pm_runtime_get_sync(chip->parent);
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to resume: %d\n", ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
@@ -72,12 +73,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
 		if (ret < 0) {
 			dev_err(chip->parent, "Failed to drop cache: %d\n",
 				ret);
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
 		}
 
 		ret = regmap_read(arizona->regmap, reg, &val);
-		if (ret < 0)
+		if (ret < 0) {
+			pm_runtime_put_autosuspend(chip->parent);
 			return ret;
+		}
 
 		pm_runtime_mark_last_busy(chip->parent);
 		pm_runtime_put_autosuspend(chip->parent);
-- 
2.25.1

[PATCH AUTOSEL 5.7 03/19] KVM: s390: reduce number of IO pins to 1

[Sasha Levin]

From: Christian Borntraeger <borntraeger@de.ibm.com>

[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ]

The current number of KVM_IRQCHIP_NUM_PINS results in an order 3
allocation (32kb) for each guest start/restart. This can result in OOM
killer activity even with free swap when the memory is fragmented
enough:

kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0
kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu
kernel: Hardware name: IBM 8562 T02 Z06 (LPAR)
kernel: Call Trace:
kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0)
kernel:  [<00000001f8d3437a>] dump_stack+0x8a/0xc0
kernel:  [<00000001f8687032>] dump_header+0x62/0x258
kernel:  [<00000001f8686122>] oom_kill_process+0x172/0x180
kernel:  [<00000001f8686abe>] out_of_memory+0xee/0x580
kernel:  [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90
kernel:  [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320
kernel:  [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0
kernel:  [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0
kernel:  [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0
kernel:  [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0
kernel:  [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760
kernel:  [<00000001f875df66>] do_vfs_ioctl+0x376/0x690
kernel:  [<00000001f875e304>] ksys_ioctl+0x84/0xb0
kernel:  [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40
kernel:  [<00000001f8d55424>] system_call+0xd8/0x2c8

As far as I can tell s390x does not use the iopins as we bail our for
anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is
only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to
reduce the memory footprint.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/include/asm/kvm_host.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index d6bcd34f3ec32..ec65bc2bd084e 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -31,12 +31,12 @@
 #define KVM_USER_MEM_SLOTS 32
 
 /*
- * These seem to be used for allocating ->chip in the routing table,
- * which we don't use. 4096 is an out-of-thin-air value. If we need
- * to look at ->chip later on, we'll need to revisit this.
+ * These seem to be used for allocating ->chip in the routing table, which we
+ * don't use. 1 is as small as we can get to reduce the needed memory. If we
+ * need to look at ->chip later on, we'll need to revisit this.
  */
 #define KVM_NR_IRQCHIPS 1
-#define KVM_IRQCHIP_NUM_PINS 4096
+#define KVM_IRQCHIP_NUM_PINS 1
 #define KVM_HALT_POLL_NS_DEFAULT 50000
 
 /* s390-specific vcpu->requests bit members */
-- 
2.25.1

[PATCH AUTOSEL 5.7 04/19] pinctrl: amd: fix npins for uart0 in kerncz_groups

[Sasha Levin]

From: Jacky Hu <hengqing.hu@gmail.com>

[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]

uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later
	{
		.name = "uart0",
		.pins = uart0_pins,
		.npins = 9,
	},

npins should be 5 instead of 9 according to the definition.

Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-amd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h
index 3e5760f1a7153..d4a192df5fabd 100644
--- a/drivers/pinctrl/pinctrl-amd.h
+++ b/drivers/pinctrl/pinctrl-amd.h
@@ -252,7 +252,7 @@ static const struct amd_pingroup kerncz_groups[] = {
 	{
 		.name = "uart0",
 		.pins = uart0_pins,
-		.npins = 9,
+		.npins = 5,
 	},
 	{
 		.name = "uart1",
-- 
2.25.1

[PATCH AUTOSEL 5.7 05/19] bpf: Set the number of exception entries properly for subprograms

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit c4c0bdc0d2d084ed847c7066bdf59fe2cd25aa17 ]

Currently, if a bpf program has more than one subprograms, each program will be
jitted separately. For programs with bpf-to-bpf calls the
prog->aux->num_exentries is not setup properly. For example, with
bpf_iter_netlink.c modified to force one function to be not inlined and with
CONFIG_BPF_JIT_ALWAYS_ON the following error is seen:
   $ ./test_progs -n 3/3
   ...
   libbpf: failed to load program 'iter/netlink'
   libbpf: failed to load object 'bpf_iter_netlink'
   libbpf: failed to load BPF skeleton 'bpf_iter_netlink': -4007
   test_netlink:FAIL:bpf_iter_netlink__open_and_load skeleton open_and_load failed
   #3/3 netlink:FAIL
The dmesg shows the following errors:
   ex gen bug
which is triggered by the following code in arch/x86/net/bpf_jit_comp.c:
   if (excnt >= bpf_prog->aux->num_exentries) {
     pr_err("ex gen bug\n");
     return -EFAULT;
   }

This patch fixes the issue by computing proper num_exentries for each
subprogram before calling JIT.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 739d9ba3ba6b7..eebdd5307713b 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -9613,7 +9613,7 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 	int i, j, subprog_start, subprog_end = 0, len, subprog;
 	struct bpf_insn *insn;
 	void *old_bpf_func;
-	int err;
+	int err, num_exentries;
 
 	if (env->subprog_cnt <= 1)
 		return 0;
@@ -9688,6 +9688,14 @@ static int jit_subprogs(struct bpf_verifier_env *env)
 		func[i]->aux->nr_linfo = prog->aux->nr_linfo;
 		func[i]->aux->jited_linfo = prog->aux->jited_linfo;
 		func[i]->aux->linfo_idx = env->subprog_info[i].linfo_idx;
+		num_exentries = 0;
+		insn = func[i]->insnsi;
+		for (j = 0; j < func[i]->len; j++, insn++) {
+			if (BPF_CLASS(insn->code) == BPF_LDX &&
+			    BPF_MODE(insn->code) == BPF_PROBE_MEM)
+				num_exentries++;
+		}
+		func[i]->aux->num_exentries = num_exentries;
 		func[i] = bpf_int_jit_compile(func[i]);
 		if (!func[i]->jited) {
 			err = -ENOTSUPP;
-- 
2.25.1

[PATCH AUTOSEL 5.7 06/19] mac80211: allow rx of mesh eapol frames with default rx key

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 91a13aee43784..961f37c0701bc 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2357,6 +2357,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
 
 static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 {
+	struct ieee80211_hdr *hdr = (void *)rx->skb->data;
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
@@ -2367,6 +2368,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 	if (status->flag & RX_FLAG_DECRYPTED)
 		return 0;
 
+	/* check mesh EAPOL frames first */
+	if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) &&
+		     ieee80211_is_data(fc))) {
+		struct ieee80211s_hdr *mesh_hdr;
+		u16 hdr_len = ieee80211_hdrlen(fc);
+		u16 ethertype_offset;
+		__be16 ethertype;
+
+		if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr))
+			goto drop_check;
+
+		/* make sure fixed part of mesh header is there, also checks skb len */
+		if (!pskb_may_pull(rx->skb, hdr_len + 6))
+			goto drop_check;
+
+		mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len);
+		ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) +
+				   sizeof(rfc1042_header);
+
+		if (skb_copy_bits(rx->skb, ethertype_offset, &ethertype, 2) == 0 &&
+		    ethertype == rx->sdata->control_port_protocol)
+			return 0;
+	}
+
+drop_check:
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
 		     !ieee80211_is_any_nullfunc(fc) &&
-- 
2.25.1

[PATCH AUTOSEL 5.7 07/19] scsi: scsi_transport_spi: Fix function pointer check

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ]

clang static analysis flags several null function pointer problems.

drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewing the store_spi_store_max macro

	if (i->f->set_##field)
		return -EINVAL;

should be

	if (!i->f->set_##field)
		return -EINVAL;

Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index f8661062ef954..f3d5b1bbd5aa7 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -339,7 +339,7 @@ store_spi_transport_##field(struct device *dev, 			\
 	struct spi_transport_attrs *tp					\
 		= (struct spi_transport_attrs *)&starget->starget_data;	\
 									\
-	if (i->f->set_##field)						\
+	if (!i->f->set_##field)						\
 		return -EINVAL;						\
 	val = simple_strtoul(buf, NULL, 0);				\
 	if (val > tp->max_##field)					\
-- 
2.25.1

[PATCH AUTOSEL 5.7 08/19] xtensa: fix __sync_fetch_and_{and,or}_4 declarations

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/xtensa_ksyms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 4092555828b13..24cf6972eacea 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -87,13 +87,13 @@ void __xtensa_libgcc_window_spill(void)
 }
 EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
 
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
 EXPORT_SYMBOL(__sync_fetch_and_and_4);
 
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
-- 
2.25.1

[PATCH AUTOSEL 5.7 09/19] xtensa: update *pos in cpuinfo_op.next

[Sasha Levin]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/setup.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 3880c765d4489..0271e2e47bcdf 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -725,7 +725,8 @@ c_start(struct seq_file *f, loff_t *pos)
 static void *
 c_next(struct seq_file *f, void *v, loff_t *pos)
 {
-	return NULL;
+	++*pos;
+	return c_start(f, pos);
 }
 
 static void
-- 
2.25.1

[PATCH AUTOSEL 5.7 10/19] scsi: mpt3sas: Fix unlock imbalance

[Sasha Levin]

From: Damien Le Moal <damien.lemoal@wdc.com>

[ Upstream commit cb551b8dc079d2ef189145782627c99cb68c0255 ]

In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry
to the function is true, a "goto out" is called. This results in unlocking
ioc->pci_access_mutex without this mutex lock being taken.  This generates
the following splat:

[ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive
[ 1148.547184]
[ 1148.548708] =====================================
[ 1148.553501] WARNING: bad unlock balance detected!
[ 1148.558277] 5.8.0-rc3+ #827 Not tainted
[ 1148.562183] -------------------------------------
[ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at:
[ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas]
[ 1148.580574] but there are no more locks to release!
[ 1148.585524]
[ 1148.585524] other info that might help us debug this:
[ 1148.599624] 3 locks held by cat/5008:
[ 1148.607085]  #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480
[ 1148.618509]  #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0
[ 1148.630729]  #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0
[ 1148.643347]
[ 1148.643347] stack backtrace:
[ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827
[ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 1148.678394] Call Trace:
[ 1148.684750]  dump_stack+0x78/0xa0
[ 1148.691802]  lock_release.cold+0x45/0x4a
[ 1148.699451]  __mutex_unlock_slowpath+0x35/0x270
[ 1148.707675]  BRM_status_show+0xd3/0x100 [mpt3sas]
[ 1148.716092]  dev_attr_show+0x19/0x40
[ 1148.723664]  sysfs_kf_seq_show+0x87/0x100
[ 1148.731193]  seq_read+0xbc/0x480
[ 1148.737882]  vfs_read+0xa0/0x160
[ 1148.744514]  ksys_read+0x58/0xd0
[ 1148.751129]  do_syscall_64+0x4c/0xa0
[ 1148.757941]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1148.766240] RIP: 0033:0x7f1230566542
[ 1148.772957] Code: Bad RIP value.
[ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542
[ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003
[ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000
[ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000
[ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000

Fix this by returning immediately instead of jumping to the out label.

Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.com
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 62e552838565f..e94e72de2fc68 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3145,7 +3145,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	if (!ioc->is_warpdrive) {
 		ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
 			__func__);
-		goto out;
+		return 0;
 	}
 	/* pci_access_mutex lock acquired by sysfs show path */
 	mutex_lock(&ioc->pci_access_mutex);
-- 
2.25.1

[PATCH AUTOSEL 5.7 11/19] drivers/net/wan/lapbether: Fixed the value of hard_header_len

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes,
  then this driver will prepend a length field of 2 bytes,
  then the underlying Ethernet device will prepend its own header.

So, the header length required should be:
  -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index e30d91a38cfb6..284832314f310 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -303,7 +303,6 @@ static void lapbeth_setup(struct net_device *dev)
 	dev->netdev_ops	     = &lapbeth_netdev_ops;
 	dev->needs_free_netdev = true;
 	dev->type            = ARPHRD_X25;
-	dev->hard_header_len = 3;
 	dev->mtu             = 1000;
 	dev->addr_len        = 0;
 }
@@ -324,6 +323,14 @@ static int lapbeth_new_device(struct net_device *dev)
 	if (!ndev)
 		goto out;
 
+	/* When transmitting data:
+	 * first this driver removes a pseudo header of 1 byte,
+	 * then the lapb module prepends an LAPB header of at most 3 bytes,
+	 * then this driver prepends a length field of 2 bytes,
+	 * then the underlying Ethernet device prepends its own header.
+	 */
+	ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 12/19] ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ]

When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.

The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.

The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.

BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 137d655fed8f8..e821c9df81070 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1804,33 +1804,43 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 static int hdmi_parse_codec(struct hda_codec *codec)
 {
-	hda_nid_t nid;
+	hda_nid_t start_nid;
+	unsigned int caps;
 	int i, nodes;
 
-	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &nid);
-	if (!nid || nodes < 0) {
+	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid);
+	if (!start_nid || nodes < 0) {
 		codec_warn(codec, "HDMI: failed to get afg sub nodes\n");
 		return -EINVAL;
 	}
 
-	for (i = 0; i < nodes; i++, nid++) {
-		unsigned int caps;
-		unsigned int type;
+	/*
+	 * hdmi_add_pin() assumes total amount of converters to
+	 * be known, so first discover all converters
+	 */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
 
 		caps = get_wcaps(codec, nid);
-		type = get_wcaps_type(caps);
 
 		if (!(caps & AC_WCAP_DIGITAL))
 			continue;
 
-		switch (type) {
-		case AC_WID_AUD_OUT:
+		if (get_wcaps_type(caps) == AC_WID_AUD_OUT)
 			hdmi_add_cvt(codec, nid);
-			break;
-		case AC_WID_PIN:
+	}
+
+	/* discover audio pins */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
+
+		caps = get_wcaps(codec, nid);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		if (get_wcaps_type(caps) == AC_WID_PIN)
 			hdmi_add_pin(codec, nid);
-			break;
-		}
 	}
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.7 12/19] ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ]

When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.

The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.

The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.

BugLink: https://github.com/thesofproject/linux/issues/1978
BugLink: https://github.com/thesofproject/linux/issues/2216
BugLink: https://github.com/thesofproject/linux/issues/2217
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 36 +++++++++++++++++++++++-------------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 137d655fed8f8..e821c9df81070 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1804,33 +1804,43 @@ static int hdmi_add_cvt(struct hda_codec *codec, hda_nid_t cvt_nid)
 
 static int hdmi_parse_codec(struct hda_codec *codec)
 {
-	hda_nid_t nid;
+	hda_nid_t start_nid;
+	unsigned int caps;
 	int i, nodes;
 
-	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &nid);
-	if (!nid || nodes < 0) {
+	nodes = snd_hda_get_sub_nodes(codec, codec->core.afg, &start_nid);
+	if (!start_nid || nodes < 0) {
 		codec_warn(codec, "HDMI: failed to get afg sub nodes\n");
 		return -EINVAL;
 	}
 
-	for (i = 0; i < nodes; i++, nid++) {
-		unsigned int caps;
-		unsigned int type;
+	/*
+	 * hdmi_add_pin() assumes total amount of converters to
+	 * be known, so first discover all converters
+	 */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
 
 		caps = get_wcaps(codec, nid);
-		type = get_wcaps_type(caps);
 
 		if (!(caps & AC_WCAP_DIGITAL))
 			continue;
 
-		switch (type) {
-		case AC_WID_AUD_OUT:
+		if (get_wcaps_type(caps) == AC_WID_AUD_OUT)
 			hdmi_add_cvt(codec, nid);
-			break;
-		case AC_WID_PIN:
+	}
+
+	/* discover audio pins */
+	for (i = 0; i < nodes; i++) {
+		hda_nid_t nid = start_nid + i;
+
+		caps = get_wcaps(codec, nid);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		if (get_wcaps_type(caps) == AC_WID_PIN)
 			hdmi_add_pin(codec, nid);
-			break;
-		}
 	}
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.7 13/19] net: usb: qmi_wwan: add support for Quectel EG95 LTE modem

[Sasha Levin]

From: AceLan Kao <acelan.kao@canonical.com>

[ Upstream commit f815dd5cf48b905eeecf0a2b990e9b7ab048b4f1 ]

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0195 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 4a2c7355be63d..e57d59b0a7ae9 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1370,6 +1370,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)},	/* SIMCom 7100E, 7230E, 7600E ++ */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)},	/* Quectel EC21 Mini PCIe */
 	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)},	/* Quectel EG91 */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)},	/* Quectel EG95 */
 	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
 	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
 	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
-- 
2.25.1

[PATCH AUTOSEL 5.7 14/19] net: sky2: initialize return of gm_phy_read

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 241f007169797..fe54764caea9c 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -203,7 +203,7 @@ static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
 
 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 {
-	u16 v;
+	u16 v = 0;
 	__gm_phy_read(hw, port, reg, &v);
 	return v;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.7 15/19] drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c   | 4 ++--
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
index c8ab1b5741a3e..db7769cb33eba 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
@@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00e4e4 + base);
 			udelay(1);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
index 7ef60895f43a7..edb6148cbca04 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
@@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00d954 + base);
 			udelay(1);
-- 
2.25.1

[PATCH AUTOSEL 5.7 15/19] drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

[Sasha Levin]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c   | 4 ++--
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
index c8ab1b5741a3e..db7769cb33eba 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
@@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00e4e4 + base);
 			udelay(1);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
index 7ef60895f43a7..edb6148cbca04 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c
@@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00d954 + base);
 			udelay(1);
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.7 16/19] scsi: mpt3sas: Fix error returns in BRM_status_show

[Sasha Levin]

From: Johannes Thumshirn <johannes.thumshirn@wdc.com>

[ Upstream commit 0fd181456aa0826057adbfb6c79c40f4083cfd75 ]

BRM_status_show() has several error branches, but none of them record the
error in the error return.

Also while at it remove the manual mutex_unlock() of the pci_access_mutex
in case of an ongoing pci error recovery or host removal and jump to the
cleanup label instead.

Note: We can safely jump to out from here as io_unit_pg3 is initialized to
NULL and if it hasn't been allocated, kfree() skips the NULL pointer.

[mkp: compilation warning]

Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index e94e72de2fc68..983e568ff2317 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3149,15 +3149,14 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	}
 	/* pci_access_mutex lock acquired by sysfs show path */
 	mutex_lock(&ioc->pci_access_mutex);
-	if (ioc->pci_error_recovery || ioc->remove_host) {
-		mutex_unlock(&ioc->pci_access_mutex);
-		return 0;
-	}
+	if (ioc->pci_error_recovery || ioc->remove_host)
+		goto out;
 
 	/* allocate upto GPIOVal 36 entries */
 	sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
 	io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
 	if (!io_unit_pg3) {
+		rc = -ENOMEM;
 		ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n",
 			__func__, sz);
 		goto out;
@@ -3167,6 +3166,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	    0) {
 		ioc_err(ioc, "%s: failed reading iounit_pg3\n",
 			__func__);
+		rc = -EINVAL;
 		goto out;
 	}
 
@@ -3174,12 +3174,14 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
 		ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n",
 			__func__, ioc_status);
+		rc = -EINVAL;
 		goto out;
 	}
 
 	if (io_unit_pg3->GPIOCount < 25) {
 		ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n",
 			__func__, io_unit_pg3->GPIOCount);
+		rc = -EINVAL;
 		goto out;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 17/19] scsi: dh: Add Fujitsu device to devinfo and dh lists

[Sasha Levin]

From: Steve Schremmer <steve.schremmer@netapp.com>

[ Upstream commit e094fd346021b820f37188aaa6b502c7490ab5b5 ]

Add FUJITSU ETERNUS_AHB

Link: https://lore.kernel.org/r/DM6PR06MB5276CCA765336BD312C4282E8C660@DM6PR06MB5276.namprd06.prod.outlook.com
Signed-off-by: Steve Schremmer <steve.schremmer@netapp.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_devinfo.c | 1 +
 drivers/scsi/scsi_dh.c      | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index eed31021e7885..ba84244c1b4f6 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -239,6 +239,7 @@ static struct {
 	{"LSI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"ENGENIO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"LENOVO", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
+	{"FUJITSU", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
 	{"SanDisk", "Cruzer Blade", NULL, BLIST_TRY_VPD_PAGES |
 		BLIST_INQUIRY_36},
 	{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
diff --git a/drivers/scsi/scsi_dh.c b/drivers/scsi/scsi_dh.c
index 42f0550d6b11f..6f41e4b5a2b85 100644
--- a/drivers/scsi/scsi_dh.c
+++ b/drivers/scsi/scsi_dh.c
@@ -63,6 +63,7 @@ static const struct scsi_dh_blist scsi_dh_blist[] = {
 	{"LSI", "INF-01-00",		"rdac", },
 	{"ENGENIO", "INF-01-00",	"rdac", },
 	{"LENOVO", "DE_Series",		"rdac", },
+	{"FUJITSU", "ETERNUS_AHB",	"rdac", },
 	{NULL, NULL,			NULL },
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.7 18/19] dm: use bio_uninit instead of bio_disassociate_blkg

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 382761dc6312965a11f82f2217e16ec421bf17ae ]

bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail.  Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index db9e461146531..c33aaf29f1379 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1445,9 +1445,6 @@ static int __send_empty_flush(struct clone_info *ci)
 	BUG_ON(bio_has_data(ci->bio));
 	while ((ti = dm_table_get_target(ci->map, target_nr++)))
 		__send_duplicate_bios(ci, ti, ti->num_flush_bios, NULL);
-
-	bio_disassociate_blkg(ci->bio);
-
 	return 0;
 }
 
@@ -1635,6 +1632,7 @@ static blk_qc_t __split_and_process_bio(struct mapped_device *md,
 		ci.bio = &flush_bio;
 		ci.sector_count = 0;
 		error = __send_empty_flush(&ci);
+		bio_uninit(ci.bio);
 		/* dec_pending submits any data associated with flush */
 	} else if (op_is_zone_mgmt(bio_op(bio))) {
 		ci.bio = bio;
@@ -1709,6 +1707,7 @@ static blk_qc_t __process_bio(struct mapped_device *md, struct dm_table *map,
 		ci.bio = &flush_bio;
 		ci.sector_count = 0;
 		error = __send_empty_flush(&ci);
+		bio_uninit(ci.bio);
 		/* dec_pending submits any data associated with flush */
 	} else {
 		struct dm_target_io *tio;
-- 
2.25.1

[PATCH AUTOSEL 5.7 19/19] drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()

[Sasha Levin]

From: Gavin Shan <gshan@redhat.com>

[ Upstream commit c377e67c6271954969384f9be1b1b71de13eba30 ]

The CPU mask (@tmp) should be released on failing to allocate
@cpu_groups or any of its elements. Otherwise, it leads to memory
leakage because the CPU mask variable is dynamically allocated
when CONFIG_CPUMASK_OFFSTACK is enabled.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/psci/psci_checker.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/psci/psci_checker.c b/drivers/firmware/psci/psci_checker.c
index 873841af8d575..d9b1a2d71223e 100644
--- a/drivers/firmware/psci/psci_checker.c
+++ b/drivers/firmware/psci/psci_checker.c
@@ -157,8 +157,10 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
 
 	cpu_groups = kcalloc(nb_available_cpus, sizeof(cpu_groups),
 			     GFP_KERNEL);
-	if (!cpu_groups)
+	if (!cpu_groups) {
+		free_cpumask_var(tmp);
 		return -ENOMEM;
+	}
 
 	cpumask_copy(tmp, cpu_online_mask);
 
@@ -167,6 +169,7 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
 			topology_core_cpumask(cpumask_any(tmp));
 
 		if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) {
+			free_cpumask_var(tmp);
 			free_cpu_groups(num_groups, &cpu_groups);
 			return -ENOMEM;
 		}
-- 
2.25.1

[PATCH AUTOSEL 5.7 19/19] drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()

[Sasha Levin]

From: Gavin Shan <gshan@redhat.com>

[ Upstream commit c377e67c6271954969384f9be1b1b71de13eba30 ]

The CPU mask (@tmp) should be released on failing to allocate
@cpu_groups or any of its elements. Otherwise, it leads to memory
leakage because the CPU mask variable is dynamically allocated
when CONFIG_CPUMASK_OFFSTACK is enabled.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/psci/psci_checker.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/psci/psci_checker.c b/drivers/firmware/psci/psci_checker.c
index 873841af8d575..d9b1a2d71223e 100644
--- a/drivers/firmware/psci/psci_checker.c
+++ b/drivers/firmware/psci/psci_checker.c
@@ -157,8 +157,10 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
 
 	cpu_groups = kcalloc(nb_available_cpus, sizeof(cpu_groups),
 			     GFP_KERNEL);
-	if (!cpu_groups)
+	if (!cpu_groups) {
+		free_cpumask_var(tmp);
 		return -ENOMEM;
+	}
 
 	cpumask_copy(tmp, cpu_online_mask);
 
@@ -167,6 +169,7 @@ static int alloc_init_cpu_groups(cpumask_var_t **pcpu_groups)
 			topology_core_cpumask(cpumask_any(tmp));
 
 		if (!alloc_cpumask_var(&cpu_groups[num_groups], GFP_KERNEL)) {
+			free_cpumask_var(tmp);
 			free_cpu_groups(num_groups, &cpu_groups);
 			return -ENOMEM;
 		}
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel