All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <robh@kernel.org>,
	<marek.behun@nic.cz>
Cc: <devicetree@vger.kernel.org>, <linux-leds@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Dan Murphy <dmurphy@ti.com>,
	Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v32 6/6] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
Date: Wed, 22 Jul 2020 10:31:46 -0500	[thread overview]
Message-ID: <20200722153146.8767-7-dmurphy@ti.com> (raw)
In-Reply-To: <20200722153146.8767-1-dmurphy@ti.com>

Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b3c53d..ff47cbf6ed3b 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -58,16 +58,21 @@ lp5521@33 {
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -77,15 +82,20 @@ lp5521@34 {
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com>
To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <robh@kernel.org>,
	<marek.behun@nic.cz>
Cc: devicetree@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v32 6/6] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes
Date: Wed, 22 Jul 2020 10:31:46 -0500	[thread overview]
Message-ID: <20200722153146.8767-7-dmurphy@ti.com> (raw)
In-Reply-To: <20200722153146.8767-1-dmurphy@ti.com>

Add the reg property to each channel node.  This update is
to accommodate the multicolor framework.  In addition to the
accommodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
---
 arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 33e3b0b3c53d..ff47cbf6ed3b 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -58,16 +58,21 @@ lp5521@33 {
 				reg = <0x33>;
 				label = "lp5521_pri";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 					linux,default-trigger = "heartbeat";
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
@@ -77,15 +82,20 @@ lp5521@34 {
 				reg = <0x34>;
 				label = "lp5521_sec";
 				clock-mode = /bits/ 8 <2>;
-				chan0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				chan@0 {
+					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan1 {
+				chan@1 {
+					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-				chan2 {
+				chan@2 {
+					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
 				};
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-07-22 15:32 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-22 15:31 [PATCH v32 0/6] Multicolor Framework v32 Dan Murphy
2020-07-22 15:31 ` Dan Murphy
2020-07-22 15:31 ` [PATCH v32 1/6] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2020-07-22 15:31   ` Dan Murphy
2020-07-28 13:39   ` Dan Murphy
2020-07-28 13:39     ` Dan Murphy
2020-08-04 19:55     ` Dan Murphy
2020-08-04 19:55       ` Dan Murphy
2020-08-07 13:42       ` Dan Murphy
2020-08-07 13:42         ` Dan Murphy
2020-08-11 10:32         ` Pavel Machek
2020-08-11 10:32           ` Pavel Machek
2020-08-11 10:20   ` Pavel Machek
2020-08-11 10:20     ` Pavel Machek
2020-08-11 17:07     ` Dan Murphy
2020-08-11 17:07       ` Dan Murphy
2020-07-22 15:31 ` [PATCH v32 2/6] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2020-07-22 15:31   ` Dan Murphy
2020-08-11 10:29   ` Pavel Machek
2020-08-11 10:29     ` Pavel Machek
2020-08-11 10:31   ` Pavel Machek
2020-08-11 10:31     ` Pavel Machek
2020-08-11 10:54   ` Pavel Machek
2020-08-11 10:54     ` Pavel Machek
2020-08-11 17:27     ` Dan Murphy
2020-08-11 17:27       ` Dan Murphy
2020-08-11 22:01       ` Pavel Machek
2020-08-11 22:01         ` Pavel Machek
2020-08-11 22:16         ` Dan Murphy
2020-08-11 22:16           ` Dan Murphy
2020-08-11 22:26           ` Pavel Machek
2020-08-11 22:26             ` Pavel Machek
2020-08-12 16:00             ` Dan Murphy
2020-08-12 16:00               ` Dan Murphy
2020-07-22 15:31 ` [PATCH v32 3/6] ARM: defconfig: u8500: Add LP55XX_COMMON config flag Dan Murphy
2020-07-22 15:31   ` Dan Murphy
2020-07-28 13:38   ` Dan Murphy
2020-07-28 13:38     ` Dan Murphy
2020-08-03 23:14   ` Linus Walleij
2020-08-03 23:14     ` Linus Walleij
2020-07-22 15:31 ` [PATCH v32 4/6] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy
2020-07-22 15:31   ` Dan Murphy
2020-07-22 15:31 ` [PATCH v32 5/6] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy
2020-07-22 15:31   ` Dan Murphy
2020-07-22 15:31 ` Dan Murphy [this message]
2020-07-22 15:31   ` [PATCH v32 6/6] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200722153146.8767-7-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jacek.anaszewski@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=marek.behun@nic.cz \
    --cc=pavel@ucw.cz \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.